Package: amd-smi Description-md5: c13bf349d8c1e6edfdc32bd26656f868 Description-en: AMD System Management Interface - executable amdsmi (AMD System Management Interface Library) is a C library for Linux providing user space interfaces to monitor and control AMD GPU devices. . This package provides the amd-smi executable. Package: audispd-plugins Description-md5: c26f63ffa7afd772d352e8391f3ed311 Description-en: Plugins for the audit event dispatcher This package provides plugins for the real-time interface to the audit system, audispd. These plugins can do things like relay events to remote machines or analyze events for suspicious behavior. Package: bluetooth Description-md5: 9e39e616b43759f27940df27b76d2e46 Description-en: Bluetooth support (metapackage) This package provides all of the different plugins supported by the Bluez bluetooth stack. Package: bluez-hcidump Description-md5: 4ebfd05a0b1b606a60e737cc590e2325 Description-en: Analyses Bluetooth HCI packets The hcidump utility allows the monitoring of Bluetooth activity. It provides a disassembly of the Bluetooth traffic and can display packets from higher level protocols such as RFCOMM, SDP and BNEP. . This was the software that is independent as bluez-hcidump, but this has been integrated into BlueZ from BlueZ 5.0. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Package: bluez-meshd Description-md5: ca06bc66a9b979e71d30c46198c95ca7 Description-en: bluetooth mesh daemon The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth Low Energy (BLE)". . This package provides daemon (meshd) and tools that provide Bluetooth mesh functionality. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Package: bluez-source Description-md5: c53970d5c21e016bf4cdb7f6f6b575a5 Description-en: Source code for the BlueZ Linux Bluetooth stack This package contains the sources and patches which are needed to build bluez. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Package: bluez-test-scripts Description-md5: b0494198a0371f6bfc1b05ec27b53bff Description-en: test scripts of bluez This package contains test scripts for using BlueZ. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Package: bluez-test-tools Description-md5: fca85c8cf3fcd7fb4552fc32307ac254 Description-en: test tools of bluez This package contains test tools for using BlueZ. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Package: calamares Description-md5: 4d5b78b9b4c9dcb910431a58e1938ff8 Description-en: distribution-independent installer framework Calamares is a distribution-independent installer framework. . It provides a graphical installer that can be used with nearly any distribution. This package is suitable for live media on Debian-based systems, and won't be of any particular use on an already installed system. . You will likely want to provide your own config files to match your distribution, reading the Calamares documentation will guide you through that process. Package: calamares-data Description-md5: 56041607ddc57500a67a51f10dc6f560 Description-en: data for Calamares Calamares is a distribution-independent installer framework. . It provides a graphical installer that can be used with nearly any distribution. This package is suitable for live media on Debian-based systems, and won't be of any particular use on an already installed system. . You will likely want to provide your own config files to match your distribution, reading the Calamares documentation will guide you through that process. . Data files for Calamares. Package: clamav-milter Description-md5: e47a1194215b5fbde13fb9217c44d83f Description-en: anti-virus utility for Unix - sendmail integration Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of this software is the integration with mail servers (attachment scanning). The package provides a flexible and scalable multi-threaded daemon in the clamav-daemon package, a command-line scanner in the clamav package, and a tool for automatic updating via the Internet in the clamav-freshclam package. The programs are based on libclamav, which can be used by other software. . This package contains the ClamAV milter for use with sendmail. It can be configured to be run either standalone, or using clamav-daemon. Package: clamav-testfiles Description-md5: 29437a0b8c82cc8179b64405688f062e Description-en: anti-virus utility for Unix - test files Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of this software is the integration with mail servers (attachment scanning). The package provides a flexible and scalable multi-threaded daemon in the clamav-daemon package, a command-line scanner in the clamav package, and a tool for automatic updating via the Internet in the clamav-freshclam package. The programs are based on libclamav, which can be used by other software. . This package contains files 'infected' with a test signature. The test signature (ClamAV-Test-Signature) should be detectable by all anti-virus programs. Package: cloud-init-cloud-sigma Description-md5: 838596c3d65b6aa6ba3bf9229053601e Description-en: Cloud Sigma specific cloud-init This metapackage depends on cloud-init-base and additional packages for Cloud Sigma. Package: cloud-init-smart-os Description-md5: cf64b2d72dcca1e78fe3587b4feedd95 Description-en: Smart OS specific cloud-init This metapackage depends on cloud-init-base and additional packages for Smart OS. Package: cpupower-gui Description-md5: 63fd6dee1c9a22debee0ede094fd44b7 Description-en: GUI utility to change the CPU frequency This utility can change the operating frequency of the CPU for each core separately. Additionally, the cpu governor can be changed. The program can detect offline cores and only present the available ones. Furthermore, if a core doesn't support frequency scaling is not shown. There is also an option to apply the same settings to all cores simultaneously. To apply the settings, the user must be local and active, as well as in group sudo. Local and active users not in this group must authenticate themselves as admin in order to apply the settings. Package: doca-ofed-26.01-dkms Description-md5: 814c29b4f166adc9d3ca86f4fd4a96ee Description-en: DKMS support for NVIDIA DOCA-OFED kernel modules This package provides integration with the DKMS infrastructure for automatically building out of tree kernel modules. . This package provides the source code for the DOCA-OFED kernel modules. . This package contains the source to be built with dkms. Package: efi-shell-aa64 Description-md5: 148e69dcdf98514fabee21516b756811 Description-en: UEFI Shell for 64-bit ARM architecture The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellaa64.efi binary for the 64-bit ARM architecture. Package: efi-shell-aa64-hwe Description-md5: 7dce0b9f67d1e0810ee3fa612a2fcea8 Description-en: UEFI Shell for 64-bit ARM architecture This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellaa64.efi binary for the 64-bit ARM architecture. Package: efi-shell-loongarch64 Description-md5: d87dcb728bf4c723c54605d78aeaf01a Description-en: UEFI Shell for 64-bit LoongArch architecture The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellloongarch64.efi binary for the 64-bit LoongArch architecture. Package: efi-shell-loongarch64-hwe Description-md5: 6169ed9b366c48c528192895c2a2a1e3 Description-en: UEFI Shell for 64-bit LoongArch architecture This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellloongarch64.efi binary for the 64-bit LoongArch architecture. Package: efi-shell-riscv64 Description-md5: 3bbadf85ee08cb7a48791fb72727234d Description-en: UEFI Shell for 64-bit RISC-V architecture The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellriscv64.efi binary for the 64-bit RISC-V architecture. Package: efi-shell-riscv64-hwe Description-md5: 3bfb4c58260f826b1f4e67a769b49b41 Description-en: UEFI Shell for 64-bit RISC-V architecture This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellriscv64.efi binary for the 64-bit RISC-V architecture. Package: efi-shell-x64 Description-md5: 319d03d6ee48666c5aabf29cd2548e18 Description-en: UEFI Shell for 64-bit x86 architecture The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellx64.efi binary for the 64-bit x86 architecture. Package: efi-shell-x64-hwe Description-md5: 24648e386fcf4fd7f2cc47fe09b9d537 Description-en: UEFI Shell for 64-bit x86 architecture This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . The UEFI Shell provides a command line interface running on top of the EFI API. It can be used to execute EFI binaries, to manage EFI variables and boot options, or to display details of installed devices, drivers, and protocols. This package contains the shellx64.efi binary for the 64-bit x86 architecture. Package: fdb5 Description-md5: b8113b83d8359805cf69e95c307929ba Description-en: Utilities for the FDB Fields Database FDB (Fields DataBase) is a domain-specific object store developed at ECMWF for storing, indexing and retrieving GRIB data. Each GRIB message is stored as a field and indexed trough semantic metadata (i.e. physical variables such as temperature, pressure, ...). A set of fields can be retrieved specifying a request using a specific language developed for accessing the MARS Archive. Package: fence-agents-ack-manual Description-md5: 0507ce0119793c41c3b1e136cec731d1 Description-en: Fence Agents for Red Hat Cluster - manual ack agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ack_manual tells fenced to stop retrying and consider the node fenced. . It is important that this only be done after the node has been manually turned off or prevented from writing to shared storage. Without this manual action and verification, the storage that fencing protects may become corrupted. Package: fence-agents-aliyun Description-md5: 97e013255e09168670593066d5012820 Description-en: Fence Agents for Red Hat Cluster - Aliyun agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides an I/O fencing agent for Aliyun Web Services in Alibaba Cloud. . Note: This agent requires Aliyun Python SDK to be functional. Package: fence-agents-alom Description-md5: 3e33fd8c96316599fcd7cd626ccad69c Description-en: Fence Agents for Red Hat Cluster - Sun ALOM agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_alom is an I/O Fencing agent which can be used with ALOM connected machines. Package: fence-agents-amt Description-md5: 640e8659110cad8b86cb12b76a52d28d Description-en: Fence Agents for Red Hat Cluster - Intel AMT agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_amt is an I/O Fencing agent which can be used with Intel AMT. Package: fence-agents-apc Description-md5: 0f7ba1c94d207bb336b88ae528b39702 Description-en: Fence Agents for Red Hat Cluster - APC over telnet/ssh agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_apc is an I/O Fencing agent which can be used with the APC network power switch. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-apc-snmp Description-md5: 03da8cb080c0bde1ba9bce4d2d0bf923 Description-en: Fence Agents for Red Hat Cluster - APC over SNMP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides an I/O Fencing agents which can be used with the APC network power switch or Tripplite PDU devices. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings. Package: fence-agents-aws Description-md5: 1d30ba83562b5c0c3c5c89c0214e8bed Description-en: Fence Agents for Red Hat Cluster - AWS agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_aws is an I/O Fencing agent for AWS (Amazon Web Services). It uses the boto3 library to connect to AWS. Package: fence-agents-aws-vpc-net Description-md5: 55d9806e95c34348b4a8597b279dd983 Description-en: Fence Agents for Red Hat Cluster - AWS VPC agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_aws_vpc is a Network and Power Fencing agent for AWS VPC that works by manipulating security groups. It uses the boto3 library to connect to AWS. Package: fence-agents-azure-arm Description-md5: 69b52b4da35b465159f953b34e0a8ced Description-en: Fence Agents for Red Hat Cluster - Azure ARM agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_azure_arm is an I/O Fencing agent for Azure Resource Manager. It uses Azure SDK for Python to connect to Azure. Package: fence-agents-bladecenter Description-md5: 0c68d03022cb48823f11457cf8e92793 Description-en: Fence Agents for Red Hat Cluster - IBM BladeCenter telnet agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_bladecenter is an I/O Fencing agent which can be used with IBM BladeCenters with recent enough firmware that includes telnet support. It logs into a Brocade chasis via telnet or ssh and uses the command line interface to power on and off blades. Package: fence-agents-brocade Description-md5: e7c5b181378ac254537a05e656003b5f Description-en: Fence Agents for Red Hat Cluster - HP Brocade agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_brocade is an I/O Fencing agent which can be used with Brocade FC switches. It logs into a Brocade switch via telnet and disables a specified port. Disabling the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-cdu Description-md5: 75458c1fbd752e9273367ef4628386da Description-en: Fence Agents for Red Hat Cluster - Sentry Switch CDU agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_cdu is an I/O Fencing agent which can be used with the Sentry Switch CDU. It logs into the device via telnet and power's on/off an outlet. Package: fence-agents-cisco-mds Description-md5: 0eb8ade260df2ba90e9792e96377c9f9 Description-en: Fence Agents for Red Hat Cluster - Cisco MDS agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_cisco_mds is an I/O Fencing agent which can be used with any Cisco MDS 9000 series with SNMP enabled device. Package: fence-agents-cisco-ucs Description-md5: b1dbe3827bebdcbb5e259ab2f84f22f5 Description-en: Fence Agents for Red Hat Cluster - Cisco UCS agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to fence machines. Package: fence-agents-compute Description-md5: 429081e2a20251c5fd194b22d8608ec3 Description-en: Fence Agents for Red Hat Cluster - OpenStack Compute agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . It tells Nova that compute nodes are down and to reschedule flagged instances. Package: fence-agents-crosslink Description-md5: fc13f5cd65acd432738f7efdeeb0e01d Description-en: Fence Agents for Red Hat Cluster - crosslink cable agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides an agent that helps two-node clusters to tackle the situation where one node lost power and cannot be fenced by telling pacemaker that if the node is not reachable over the crosslink cable, it can be assumed to be dead. Package: fence-agents-cyberpower-ssh Description-md5: 8998d01341bf61af08e992baebdbab25 Description-en: Fence Agents for Red Hat Cluster - CyberPower agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_cyberpower_ssh is an I/O Fencing agent which can be used with the CyberPower network power switch. It logs into device via ssh and reboots a specified outlet. Lengthy ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-docker Description-md5: e30fed7f30b31f9de26ea8a2a37181c5 Description-en: Fence Agents for Red Hat Cluster - Docker agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_docker is I/O fencing agent which can be used with the Docker Engine containers. You can use this fence-agent without any authentication, or you can use TLS authentication. Package: fence-agents-drac Description-md5: 322de10836dd031818630ef99061413e Description-en: Fence Agents for Red Hat Cluster - Dell DRAC 4 agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to controlling power to a server. It logs into the DRAC through the telnet interface of the card. Package: fence-agents-drac5 Description-md5: ff3db443d436260317b1c12456c61e06 Description-en: Fence Agents for Red Hat Cluster - Dell DRAC 5 agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_drac5 is an I/O Fencing agent which can be used with the Dell Remote Access Card v5 or CMC (DRAC). This device provides remote access to controlling power to a server. It logs into the DRAC through the telnet/ssh interface of the card. Package: fence-agents-dummy Description-md5: ce24144935ae96b9c29bac5b9b55349a Description-en: Fence Agents for Red Hat Cluster - dummy agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agent used for testing purpose. Package: fence-agents-eaton-snmp Description-md5: f48c8bb83a21bb56aa17f8ed93606734 Description-en: Fence Agents for Red Hat Cluster - Eaton SNMP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_eaton_snmp is an I/O Fencing agent which can be used with the Eaton network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1 and v3 with all combinations of authenticity/privacy settings. Package: fence-agents-eaton-ssh Description-md5: 91f37f903723af156d16c014ba175eb6 Description-en: Fence Agents for Red Hat Cluster - Eaton SSH agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_eaton_ssh is a Power Fencing agent that connects to Eaton ePDU devices. It logs into device via ssh and reboot a specified outlet. Package: fence-agents-ecloud Description-md5: 9e7f5adc04848dbf0723fd2384891f30 Description-en: Fence Agents for Red Hat Cluster - ANS eCloud agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ecloud is a fence agent for use with the ANS eCloud platform which is compatible with eCloud VPC and eCloud v1. Package: fence-agents-emerson Description-md5: 559402fbc328dbd764ce62c9c9860f23 Description-en: Fence Agents for Red Hat Cluster - Emerson SNMP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_emerson is an I/O Fencing agent which can be used with MPX and MPH2 managed rack PDU. Package: fence-agents-eps Description-md5: 51071cb1fc5d5dcce4623e370f77b8be Description-en: Fence Agents for Red Hat Cluster - ePowerSwitch agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for hidden page feature. . fence_epsr2 is an I/O Fencing agent for ePowerSwitch R2 and newer. In most cases you want to use fence_epsr2, as fence_eps only works with older hardware. Package: fence-agents-extra Description-md5: aa174fa7aaa56b8654f24163b7e90983 Description-en: Fence Agents for Red Hat Cluster non-curated by Ubuntu Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package is a metapackage depending on all available fence agents which are not curated by the Ubuntu Server team. The agents which are not curated by Ubuntu are not officially supported. Package: fence-agents-gce Description-md5: c9f20161b18c281129c86c0c705cf902 Description-en: Fence Agents for Red Hat Cluster - Google Compute Engine agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_gce is an I/O Fencing agent for GCE (Google Cloud Engine). It uses the googleapiclient library to connect to GCE. Package: fence-agents-hds-cb Description-md5: a36c9ecee107ad401e2283414a2dcd96 Description-en: Fence Agents for Red Hat Cluster - Hitachi Compute Blade agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_hds_cb is an I/O Fencing agent which can be used with Hitachi Compute Blades with recent enough firmware that includes telnet support. Package: fence-agents-hetzner-cloud Description-md5: be2c30a5c5c89879050121120b917d7c Description-en: Fence Agents for Red Hat Cluster - Hetzner Cloud agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_hetzner_cloud is a Power Fencing agent which can be used with Hetzner Cloud via its API to fence cloud servers. Package: fence-agents-heuristics-ping Description-md5: ff63da2f881cb986db23fa197ef8084c Description-en: Fence Agents for Red Hat Cluster - heuristics ping agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_heuristics_ping uses ping-heuristics to control execution of another fence agent on the same fencing level. . This is not a fence agent by itself. Its only purpose is to enable/disable another fence agent that lives on the same fencing level but after fence_heuristics_ping. Package: fence-agents-hpblade Description-md5: a30c8cd35af6b8c00735fc0f6368b229 Description-en: Fence Agents for Red Hat Cluster - HPE BladeSystem agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_hpblade is an I/O Fencing agent which can be used with HPE BladeSystem and HPE Integrity Superdome X. It logs into the onboard administrator of an enclosure via telnet or ssh and uses the command line interface to power blades or partitions on or off. Package: fence-agents-ibm-powervs Description-md5: 21d57ea45d7a0f53d1b2490ec549d63d Description-en: Fence Agents for Red Hat Cluster - IBM PowerVS agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ibm_powervs is an I/O Fencing agent which can be used with IBM PowerVS to fence virtual machines. Package: fence-agents-ibm-vpc Description-md5: 2fac56a6372d2ea958a4a1c07ca970e7 Description-en: Fence Agents for Red Hat Cluster - IBM Cloud VPC agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ibm_vpc is an I/O Fencing agent which can be used with IBM Cloud VPC to fence virtual machines. Package: fence-agents-ibmblade Description-md5: ddd9beb8aa71b38ad49a10b42d2e3cd2 Description-en: Fence Agents for Red Hat Cluster - IBM BladeCenter SNMP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server. Package: fence-agents-ibmz Description-md5: ad60fe4c9b6c970ef6467205d4b07461 Description-en: Fence Agents for Red Hat Cluster - IBM zSystems agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ibmz is a power fencing agent which uses the HMC Web Services API to fence IBM zSystems LPARs. Package: fence-agents-ifmib Description-md5: b456e8c0cc5a19e8759f22f9f7ce40d9 Description-en: Fence Agents for Red Hat Cluster - IF-MIB SNMP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ifmib is an I/O Fencing agent which can be used with any SNMP IF-MIB capable device. . It was written with managed ethernet switches in mind, in order to fence iSCSI SAN connections. However, there are many devices that support the IF-MIB interface. The agent uses IF-MIB::ifAdminStatus to control the state of an interface. Package: fence-agents-ilo-moonshot Description-md5: 8427c6e12438382be84d4354c5bf4ce4 Description-en: Fence Agents for Red Hat Cluster - HP Moonshot iLO agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agent for HP iLO Moonshot devices that are accessed via telnet or SSH. Package: fence-agents-ilo-mp Description-md5: 8ee910aaa0f0b26aa514c1e5be459932 Description-en: Fence Agents for Red Hat Cluster - HP iLO MP agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agent for HP Integrated Lights-Out Management Processor devices that are accessed via telnet or SSH. Package: fence-agents-ilo-ssh Description-md5: 4ec8b8af771097c0976b4e61ae53fb31 Description-en: Fence Agents for Red Hat Cluster - HP iLO over SSH agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. Package: fence-agents-ilo2 Description-md5: a632a4770fbd0beee0df234fe04db3f3 Description-en: Fence Agents for Red Hat Cluster - HP iLO2 agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agents for HP iLO2 devices that are accessed via the HTTP(s) protocol. Package: fence-agents-intelmodular Description-md5: da02370e905e0ca40b2e2e96514d5e30 Description-en: Fence Agents for Red Hat Cluster - Intel Modular agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well). Package: fence-agents-ipdu Description-md5: cf38f1fa527622aa0dd652dfc9781c54 Description-en: Fence Agents for Red Hat Cluster - IBM iPDU agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ipdu is an I/O Fencing agent which can be used with the IBM iPDU network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v3 with all combinations of authenticity/privacy settings. Package: fence-agents-ironic Description-md5: f83cd52a4fd785beda74a3f3d3afe15d Description-en: Fence Agents for Red Hat Cluster - OpenStack Ironic agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ironic is a Fencing agent which can be used with machines controlled by the Ironic (Bare Metal as a service) service. This agent calls the openstack CLI. Package: fence-agents-kdump Description-md5: 1154667d65fb5ebaf88a1d28f5ae4639 Description-en: Fence Agents for Red Hat Cluster - kdump agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_kdump is an I/O fencing agent to be used with the kdump crash recovery service. When the fence_kdump agent is invoked, it will listen for a message from the failed node that acknowledges that the failed node it executing the kdump crash kernel. Note that fence_kdump is not a replacement for traditional fencing methods. The fence_kdump agent can only detect that a node has entered the kdump crash recovery service. This allows the kdump crash recovery service complete without being preempted by traditional power fencing methods. Package: fence-agents-kubevirt Description-md5: 6af69117a339bb269fca55369602a7b9 Description-en: Fence Agents for Red Hat Cluster - KubeVirt agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_kubevirt is an I/O Fencing agent for KubeVirt. Package: fence-agents-ldom Description-md5: a255b6c93c9de070630e7a5997a17352 Description-en: Fence Agents for Red Hat Cluster - Sun LDom agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ldom is an I/O Fencing agent which can be used with LDoms virtual machines. This agent works so, that run ldm command on host machine. Package: fence-agents-lindy-pdu Description-md5: 7aaccfa9efaa9f5f5b4b78f9fcec7bce Description-en: Fence Agents for Red Hat Cluster - Lindy PDU agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_lindypdu is an I/O Fencing agent which can be used with the Lindy PDU network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1 with all combinations of authenticity/privacy settings. Package: fence-agents-lpar Description-md5: b6cb228a9ba611a08cd95240b2b7fc0b Description-en: Fence Agents for Red Hat Cluster - IBM LPAR agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agent for IBM LPAR devices that are accessed via telnet or SSH. Package: fence-agents-netio Description-md5: ce9f33e5baf3114ce1235ad0f71405c2 Description-en: Fence Agents for Red Hat Cluster - Koukaam NETIO-230B agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides an I/O Fencing agent which can be used with the Koukaam NETIO-230B Power Distribution Unit. It logs into device via telnet and reboots a specified outlet. Lengthy telnet connections should be avoided while the cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-nutanix-ahv Description-md5: f747a9a969287eba35b4a55114eeee45 Description-en: Fence Agents for Red Hat Cluster - Nutanix AHV agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides a Power Fencing agent for virtual machines deployed on Nutanix AHV cluster with the AHV cluster being managed by Prism Central. Package: fence-agents-openstack Description-md5: 9d94306a1bef97617d8560b52e05fb5c Description-en: Fence Agents for Red Hat Cluster - OpenStack Nova agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_openstack is a Fencing agent which can be used with machines controlled by the OpenStack's Nova service. Package: fence-agents-ovh Description-md5: 2d17bb13ea5cf2c4a0df7fec7750d3b8 Description-en: Fence Agents for Red Hat Cluster - OVH agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ovh is an Power Fencing agent which can be used within OVH datecentre. Poweroff is simulated with a reboot into rescue-pro mode. Package: fence-agents-ovm Description-md5: cfb9324519bee2f00e952365e439b681 Description-en: Fence Agents for Red Hat Cluster - Oracle VM agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_ovm is a Power Fencing agent which can be used with the virtual machines managed by Oracle VM Manager. Package: fence-agents-powerman Description-md5: 7d75ab07871bcb5914aa37fd2a3cff55 Description-en: Fence Agents for Red Hat Cluster - Powerman agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides a fence agent for the Powerman management utility that was designed for LLNL systems. Package: fence-agents-pve Description-md5: 426b47a6c27221b9d8e1cf5eec367818 Description-en: Fence Agents for Red Hat Cluster - Proxmox VE agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized cluster. Package: fence-agents-raritan Description-md5: 3f488c9f776af7b88f2193137f6cb44e Description-en: Fence Agents for Red Hat Cluster - Raritan Dominion PX agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_raritan is an I/O Fencing agent which can be used with the Raritan DPXS12-20 Power Distribution Unit. It logs into device via telnet and reboots a specified outlet. Lengthy telnet connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-raritan-px3 Description-md5: 03e7c5d63724fe369ab3c95f9dd69716 Description-en: Fence Agents for Red Hat Cluster - Raritan Dominion PX2/PX3 agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_raritan is an I/O Fencing agent which can be used with the Raritan PX2 and PX3 Power Distribution Unit series. It logs into device via telnet or ssh and reboots a specified outlet. Single outlets and grouped outlets are supported. Package: fence-agents-rcd-serial Description-md5: e5f3ced3125f0c0cd766943850f6d4f8 Description-en: Fence Agents for Red Hat Cluster - RCD serial agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_rcd_serial operates a serial cable that toggles a reset of an opposing server using the reset switch on its motherboard. The cable itself is simple with no power, network or moving parts. Package: fence-agents-redfish Description-md5: f1a9eeb432f8c659ff928b8011106c84 Description-en: Fence Agents for Red Hat Cluster - Redfish agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_redfish is an I/O Fencing agent which can be used with Out-of-Band controllers that support Redfish APIs. These controllers provide remote access to control power on a server. Package: fence-agents-rhevm Description-md5: bdc11fadcd21a84bfc67d15fb1839d33 Description-en: Fence Agents for Red Hat Cluster - RHEV-M REST API agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_rhevm is an I/O Fencing agent which can be used with RHEV-M REST API to fence virtual machines. Package: fence-agents-rsa Description-md5: 48c53bef94f851360628773bd00efce2 Description-en: Fence Agents for Red Hat Cluster - IBM RSA agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II management interface. It logs into an RSA II device via telnet and reboots the associated machine. Lengthy telnet connections to the RSA II device should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-rsb Description-md5: e48d290ca840010bf93f8d2d9b59f5a1 Description-en: Fence Agents for Red Hat Cluster - Fujitsu-Siemens RSB agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_rsb is an I/O Fencing agent which can be used with the Fujitsu-Siemens RSB management interface. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-sanbox2 Description-md5: f0c0f9272830b4c13e60a0c4916d5439 Description-en: Fence Agents for Red Hat Cluster - QLogic SANBox2 FC switch agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC switches. It logs into a SANBox2 switch via telnet and disables a specified port. Package: fence-agents-shelly Description-md5: bf44a2163b1202e1d257303ef32dcc8b Description-en: Fence Agents for Red Hat Cluster - Shelly agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_shelly_gen2 is a Power Fencing agent which can be used with Shelly Switches supporting the gen 2+ API to fence attached hardware. Package: fence-agents-skalar Description-md5: d84002fa5206383f91af0d134bff4a23 Description-en: Fence Agents for Red Hat Cluster - Skala-R agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . Fence agent used to manage nodes in Skala-R. Package: fence-agents-vbox Description-md5: 389cb976fd34082ec6036a8c71fd29d2 Description-en: Fence Agents for Red Hat Cluster - VirtualBox agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_vbox is an I/O Fencing agent which can be used with the virtual machines managed by VirtualBox. It logs via ssh to a dom0 where it runs VBoxManage to do all of the work. Package: fence-agents-vmware Description-md5: 4402f3b8a592d42709879709012857f2 Description-en: Fence Agents for Red Hat Cluster - VMware agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides an I/O Fencing agent which can be used with the VMware ESX, VMware ESXi or VMware Server to fence virtual machines. . Before using this agent, VI Perl Toolkit or vmrun command needs to be installed on every machine running this agent. Package: fence-agents-vmware-rest Description-md5: a95e75e3de1d10902c4fb809fe22c509 Description-en: Fence Agents for Red Hat Cluster - VMware REST API agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_vmware_rest is an I/O Fencing agent which can be used with VMware API to fence virtual machines. Package: fence-agents-vmware-soap Description-md5: 9f6cf5e8b234dc6bf56e84a5a402c674 Description-en: Fence Agents for Red Hat Cluster - VMware SOAP API agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_vmware_soap is an I/O Fencing agent which can be used with the virtual machines managed by VMWare products that have SOAP API v4.1+. Package: fence-agents-vmware-vcloud Description-md5: 986b8eeb41d63b3c38fc34034395d832 Description-en: Fence Agents for Red Hat Cluster - VMware vCloud Director API agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_vmware_vcloud is an I/O Fencing agent which can be used with VMware vCloud Director API to fence virtual machines. Package: fence-agents-wti Description-md5: 3c3abb8fd7c5e12483e44cb1776188fd Description-en: Fence Agents for Red Hat Cluster - WTI Network Power Switch agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_wti is an I/O Fencing agent which can be used with the WTI Network Power Switch (NPS). It logs into an NPS via telnet or ssh and boots a specified plug. Lengthy telnet connections to the NPS should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. Package: fence-agents-xenapi Description-md5: 9572e693325b40ef58e45b24756e8108 Description-en: Fence Agents for Red Hat Cluster - Citrix XenServer agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . fence_xenapi is an I/O Fencing agent used on Citrix XenServer hosts. It uses the XenAPI, supplied by Citrix, to establish an XML-RPC session to a XenServer host. Once the session is established, further XML-RPC commands are issued in order to switch on, switch off, restart and query the status of virtual machines running on the host. Package: fence-agents-zvm Description-md5: 15faa50240b7b7a7348490a9f32dc8fe Description-en: Fence Agents for Red Hat Cluster - IBM z/VM agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . This package provides a fencing agent for z/VM virtual machines using SMAPI service over TCP/IP. Package: fence-virt Description-md5: 3ac7dbd88407d4d5712cd27d5b4d7553 Description-en: Fence Agents for Red Hat Cluster - virt agent Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . The fencing framework consists of the agent (fence_virt) and the host daemon (fence_virtd). The fence_virtd host daemon is responsible for processing fencing requests from fence_virt agents running in virtual machines and routing the requests to the appropriate physical machine for action. . This package contains the fence_virt agent to be used inside the virtual machine. Package: fence-virtd Description-md5: 240ffb96b8f5cd8be1e210c0cd48254a Description-en: Fence Agents for Red Hat Cluster - virt daemon Red Hat Fence Agents is a collection of scripts to handle remote power management for several devices. They allow failed or unreachable nodes to be forcibly restarted and removed from the cluster. . The fencing framework consists of the agent (fence_virt) and the host daemon (fence_virtd). The fence_virtd host daemon is responsible for processing fencing requests from fence_virt agents running in virtual machines and routing the requests to the appropriate physical machine for action. . This package contains the fence_virtd daemon to be used on the physical host. Package: firefox-locale-af Description-md5: 8b2eaaf3661aadce675a60a7afd52cfa Description-en: Transitional package - firefox-locale-af -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-af is now replaced by the firefox snap. Package: firefox-locale-an Description-md5: d7dcf811c7b0f06efec109bbb0195f35 Description-en: Transitional package - firefox-locale-an -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-an is now replaced by the firefox snap. Package: firefox-locale-ar Description-md5: bb992d8748bb532eab35a74256ec016e Description-en: Transitional package - firefox-locale-ar -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ar is now replaced by the firefox snap. Package: firefox-locale-as Description-md5: 93249a5f75ed500a57ded5c5531c0f3c Description-en: Transitional package - firefox-locale-as -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-as is now replaced by the firefox snap. Package: firefox-locale-ast Description-md5: 2a57c2a9f7b7cb26c7e566c35f3044e0 Description-en: Transitional package - firefox-locale-ast -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ast is now replaced by the firefox snap. Package: firefox-locale-az Description-md5: 0d0e6f1d025656c8242597c6d145a5ce Description-en: Transitional package - firefox-locale-az -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-az is now replaced by the firefox snap. Package: firefox-locale-be Description-md5: a378e2238cbde7d3bc1067b21e46e9c1 Description-en: Transitional package - firefox-locale-be -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-be is now replaced by the firefox snap. Package: firefox-locale-bg Description-md5: f2c40b8982af31ccd0adda7eed7b501f Description-en: Transitional package - firefox-locale-bg -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-bg is now replaced by the firefox snap. Package: firefox-locale-bn Description-md5: a4a05053a157c9fd05ff47fff5f203db Description-en: Transitional package - firefox-locale-bn -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-bn is now replaced by the firefox snap. Package: firefox-locale-br Description-md5: 6e1fbcc709795ad45d30cd0e57cbcd1c Description-en: Transitional package - firefox-locale-br -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-br is now replaced by the firefox snap. Package: firefox-locale-bs Description-md5: 4d199c5e8b0ff64d3d094c2182d1e9a5 Description-en: Transitional package - firefox-locale-bs -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-bs is now replaced by the firefox snap. Package: firefox-locale-ca Description-md5: acd8a6fba534e07605b4ec68f9e310b8 Description-en: Transitional package - firefox-locale-ca -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ca is now replaced by the firefox snap. Package: firefox-locale-cak Description-md5: f8d592489bf49ce7dc3094df80447e88 Description-en: Transitional package - firefox-locale-cak -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-cak is now replaced by the firefox snap. Package: firefox-locale-cs Description-md5: 67f80e160284e15b21e7d49ce82ac707 Description-en: Transitional package - firefox-locale-cs -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-cs is now replaced by the firefox snap. Package: firefox-locale-csb Description-md5: 58420b55387c4c6d95a41011fdf2a140 Description-en: Transitional package - firefox-locale-csb -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-csb is now replaced by the firefox snap. Package: firefox-locale-cy Description-md5: bed4e07596c7535bf7e125b3b257b972 Description-en: Transitional package - firefox-locale-cy -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-cy is now replaced by the firefox snap. Package: firefox-locale-da Description-md5: f3dd6938c2856cc6f20378a498253005 Description-en: Transitional package - firefox-locale-da -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-da is now replaced by the firefox snap. Package: firefox-locale-de Description-md5: 1e9330d5e55ec0899c4b817a044bc9c1 Description-en: Transitional package - firefox-locale-de -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-de is now replaced by the firefox snap. Package: firefox-locale-el Description-md5: b2812a1962fb06b0eb0ba7464d4d408b Description-en: Transitional package - firefox-locale-el -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-el is now replaced by the firefox snap. Package: firefox-locale-en Description-md5: e943ad22a2184475bc62d6f9eb322ab3 Description-en: Transitional package - firefox-locale-en -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-en is now replaced by the firefox snap. Package: firefox-locale-eo Description-md5: b987e858f4696ee81c83a1e4a67753b2 Description-en: Transitional package - firefox-locale-eo -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-eo is now replaced by the firefox snap. Package: firefox-locale-es Description-md5: 6b0eb625d8ad59c50706b031c9e91128 Description-en: Transitional package - firefox-locale-es -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-es is now replaced by the firefox snap. Package: firefox-locale-et Description-md5: a99771fac7aa861ed2e1672ed8165cb7 Description-en: Transitional package - firefox-locale-et -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-et is now replaced by the firefox snap. Package: firefox-locale-eu Description-md5: 7a91929fa72b6dc1abde3effa35c1dd4 Description-en: Transitional package - firefox-locale-eu -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-eu is now replaced by the firefox snap. Package: firefox-locale-fa Description-md5: 01e3a37a6d99ad6af679ca82ae2653ba Description-en: Transitional package - firefox-locale-fa -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-fa is now replaced by the firefox snap. Package: firefox-locale-fi Description-md5: 054036a7aa033249db6fab978041a524 Description-en: Transitional package - firefox-locale-fi -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-fi is now replaced by the firefox snap. Package: firefox-locale-fr Description-md5: 5032899570cabe0525842912b4b5a6b5 Description-en: Transitional package - firefox-locale-fr -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-fr is now replaced by the firefox snap. Package: firefox-locale-fy Description-md5: 56e76874eeda5b2676f0cb8fc74c4986 Description-en: Transitional package - firefox-locale-fy -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-fy is now replaced by the firefox snap. Package: firefox-locale-ga Description-md5: 3d6b655407d96b324298752ed7f21d9e Description-en: Transitional package - firefox-locale-ga -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ga is now replaced by the firefox snap. Package: firefox-locale-gd Description-md5: e541ba33c3a422993517f71c702f3fb2 Description-en: Transitional package - firefox-locale-gd -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-gd is now replaced by the firefox snap. Package: firefox-locale-gl Description-md5: d3ee0b54a65f5c59a320bc790a364757 Description-en: Transitional package - firefox-locale-gl -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-gl is now replaced by the firefox snap. Package: firefox-locale-gn Description-md5: 1d686363afbecb2585ea7ed1da075ffd Description-en: Transitional package - firefox-locale-gn -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-gn is now replaced by the firefox snap. Package: firefox-locale-gu Description-md5: dc582ccc2103b54b0c6164cc211a082b Description-en: Transitional package - firefox-locale-gu -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-gu is now replaced by the firefox snap. Package: firefox-locale-he Description-md5: ce85deb92564dbd4689c2ef23c816aa9 Description-en: Transitional package - firefox-locale-he -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-he is now replaced by the firefox snap. Package: firefox-locale-hi Description-md5: 7b881412e9c004bc1d24ec303a71950a Description-en: Transitional package - firefox-locale-hi -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-hi is now replaced by the firefox snap. Package: firefox-locale-hr Description-md5: 67ba6978754d2459e00e723b80cd9b14 Description-en: Transitional package - firefox-locale-hr -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-hr is now replaced by the firefox snap. Package: firefox-locale-hsb Description-md5: 916ff01d96266dcfe4632ea77a0e620f Description-en: Transitional package - firefox-locale-hsb -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-hsb is now replaced by the firefox snap. Package: firefox-locale-hu Description-md5: 92274755e2f72db827f0d064e40b8162 Description-en: Transitional package - firefox-locale-hu -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-hu is now replaced by the firefox snap. Package: firefox-locale-hy Description-md5: 10306d1c1487c10f620bec3a2248a130 Description-en: Transitional package - firefox-locale-hy -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-hy is now replaced by the firefox snap. Package: firefox-locale-ia Description-md5: 8672e9fffd3c0030d5ecaaa14f19fb80 Description-en: Transitional package - firefox-locale-ia -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ia is now replaced by the firefox snap. Package: firefox-locale-id Description-md5: cd8c134534a179df837014c2763d6edd Description-en: Transitional package - firefox-locale-id -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-id is now replaced by the firefox snap. Package: firefox-locale-is Description-md5: 546abfd73c07b9769c16442bd072353a Description-en: Transitional package - firefox-locale-is -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-is is now replaced by the firefox snap. Package: firefox-locale-it Description-md5: 3ddb1e7e18e473ca8d352586e64d2804 Description-en: Transitional package - firefox-locale-it -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-it is now replaced by the firefox snap. Package: firefox-locale-ja Description-md5: 0950e0aec30f4997a5d2adc9bc1dfc24 Description-en: Transitional package - firefox-locale-ja -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ja is now replaced by the firefox snap. Package: firefox-locale-ka Description-md5: 03120418296534ed6a16e2c4b5269036 Description-en: Transitional package - firefox-locale-ka -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ka is now replaced by the firefox snap. Package: firefox-locale-kab Description-md5: 3f26e188ad534043e2f9837fe3bd647a Description-en: Transitional package - firefox-locale-kab -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-kab is now replaced by the firefox snap. Package: firefox-locale-kk Description-md5: 12c76ceca58dcb061d461212e7bb8b79 Description-en: Transitional package - firefox-locale-kk -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-kk is now replaced by the firefox snap. Package: firefox-locale-km Description-md5: 1a19d961d005df8c85b3b7a2ee862d95 Description-en: Transitional package - firefox-locale-km -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-km is now replaced by the firefox snap. Package: firefox-locale-kn Description-md5: 44511a19d97c613e9cf868087f824b08 Description-en: Transitional package - firefox-locale-kn -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-kn is now replaced by the firefox snap. Package: firefox-locale-ko Description-md5: a5a699f3eb17702327229e11e84c9a9b Description-en: Transitional package - firefox-locale-ko -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ko is now replaced by the firefox snap. Package: firefox-locale-ku Description-md5: e0f93825efcd10a124a7080f6b65b579 Description-en: Transitional package - firefox-locale-ku -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ku is now replaced by the firefox snap. Package: firefox-locale-lg Description-md5: c38ab51f31af09435e083553074c93ba Description-en: Transitional package - firefox-locale-lg -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-lg is now replaced by the firefox snap. Package: firefox-locale-lt Description-md5: 3e650ef86e2a2b9d37ebb968d717984e Description-en: Transitional package - firefox-locale-lt -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-lt is now replaced by the firefox snap. Package: firefox-locale-lv Description-md5: aaa09211dd6e9c4defc8f2d5df96b794 Description-en: Transitional package - firefox-locale-lv -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-lv is now replaced by the firefox snap. Package: firefox-locale-mai Description-md5: 31ecdd73e630741086bd6b17af6356ec Description-en: Transitional package - firefox-locale-mai -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-mai is now replaced by the firefox snap. Package: firefox-locale-mk Description-md5: 88ea63685fa26de5c733970ca1899a43 Description-en: Transitional package - firefox-locale-mk -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-mk is now replaced by the firefox snap. Package: firefox-locale-ml Description-md5: 30ce3d2327fa25ed7e5dac0ac3217005 Description-en: Transitional package - firefox-locale-ml -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ml is now replaced by the firefox snap. Package: firefox-locale-mn Description-md5: d25aaa17051704f3e353ea49649e2041 Description-en: Transitional package - firefox-locale-mn -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-mn is now replaced by the firefox snap. Package: firefox-locale-mr Description-md5: b9f8f4c971eb66a38557a703e9d34bd8 Description-en: Transitional package - firefox-locale-mr -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-mr is now replaced by the firefox snap. Package: firefox-locale-ms Description-md5: bf975c12d236ba981bf2c26dd48654b3 Description-en: Transitional package - firefox-locale-ms -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ms is now replaced by the firefox snap. Package: firefox-locale-my Description-md5: 380298d9c929467b358334f4123b13bf Description-en: Transitional package - firefox-locale-my -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-my is now replaced by the firefox snap. Package: firefox-locale-nb Description-md5: 03f3b282c8672585c5e0f8f9aa116798 Description-en: Transitional package - firefox-locale-nb -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-nb is now replaced by the firefox snap. Package: firefox-locale-ne Description-md5: 1efd1ff4a6277d9dbdab8e26d60bc188 Description-en: Transitional package - firefox-locale-ne -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ne is now replaced by the firefox snap. Package: firefox-locale-nl Description-md5: c522d4aca9f61eb50606dbd0db8b70ab Description-en: Transitional package - firefox-locale-nl -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-nl is now replaced by the firefox snap. Package: firefox-locale-nn Description-md5: 749702b9b090f79c662ae56923a0e681 Description-en: Transitional package - firefox-locale-nn -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-nn is now replaced by the firefox snap. Package: firefox-locale-nso Description-md5: aa045c6e31e252925e488dfad69d2c73 Description-en: Transitional package - firefox-locale-nso -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-nso is now replaced by the firefox snap. Package: firefox-locale-oc Description-md5: 592a92542cb6f05355990ac9777ca5dd Description-en: Transitional package - firefox-locale-oc -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-oc is now replaced by the firefox snap. Package: firefox-locale-or Description-md5: 393375807262da02b3a50084a56d639e Description-en: Transitional package - firefox-locale-or -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-or is now replaced by the firefox snap. Package: firefox-locale-pa Description-md5: 20e412d8b8809f886db57fe63788f85c Description-en: Transitional package - firefox-locale-pa -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-pa is now replaced by the firefox snap. Package: firefox-locale-pl Description-md5: 45771a6b77be65df739feef751bec705 Description-en: Transitional package - firefox-locale-pl -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-pl is now replaced by the firefox snap. Package: firefox-locale-pt Description-md5: d36b2f0ca663b982ce8c07c4035906ec Description-en: Transitional package - firefox-locale-pt -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-pt is now replaced by the firefox snap. Package: firefox-locale-ro Description-md5: 1dfec2784ed0f6c2c16bdb000f4e0cff Description-en: Transitional package - firefox-locale-ro -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ro is now replaced by the firefox snap. Package: firefox-locale-ru Description-md5: 8e5da1c69f728009e3bdb39f83df6188 Description-en: Transitional package - firefox-locale-ru -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ru is now replaced by the firefox snap. Package: firefox-locale-si Description-md5: 957e816d6eb927bf460a6da6c4775e3c Description-en: Transitional package - firefox-locale-si -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-si is now replaced by the firefox snap. Package: firefox-locale-sk Description-md5: a31215cba32f4d5c0b434823b707a5d5 Description-en: Transitional package - firefox-locale-sk -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sk is now replaced by the firefox snap. Package: firefox-locale-sl Description-md5: 49f16b8dda980f0318925222ad55d04d Description-en: Transitional package - firefox-locale-sl -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sl is now replaced by the firefox snap. Package: firefox-locale-sq Description-md5: acc638c2394e0834cab19e3f617b9f68 Description-en: Transitional package - firefox-locale-sq -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sq is now replaced by the firefox snap. Package: firefox-locale-sr Description-md5: df4c1d4d63c73f48abf8e171a1c5c1c7 Description-en: Transitional package - firefox-locale-sr -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sr is now replaced by the firefox snap. Package: firefox-locale-sv Description-md5: fe12c3a2e6dd09327490667359428469 Description-en: Transitional package - firefox-locale-sv -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sv is now replaced by the firefox snap. Package: firefox-locale-sw Description-md5: c1246caf78f2f974c951e2c517452152 Description-en: Transitional package - firefox-locale-sw -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-sw is now replaced by the firefox snap. Package: firefox-locale-szl Description-md5: e56626e47a1f337d7bee1dd3b18a97d0 Description-en: Transitional package - firefox-locale-szl -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-szl is now replaced by the firefox snap. Package: firefox-locale-ta Description-md5: ee88e0a6f2d8bc19df14786c67b43926 Description-en: Transitional package - firefox-locale-ta -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ta is now replaced by the firefox snap. Package: firefox-locale-te Description-md5: 7df807668eed8e0745fb0957c8e9380c Description-en: Transitional package - firefox-locale-te -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-te is now replaced by the firefox snap. Package: firefox-locale-th Description-md5: 0e8f4d04691d08b6f94382fcb0cf3ace Description-en: Transitional package - firefox-locale-th -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-th is now replaced by the firefox snap. Package: firefox-locale-tr Description-md5: 393bd94c64480834bffb305e37fe9994 Description-en: Transitional package - firefox-locale-tr -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-tr is now replaced by the firefox snap. Package: firefox-locale-uk Description-md5: c434297bb65d8f3611f3e6e04d0ea3d6 Description-en: Transitional package - firefox-locale-uk -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-uk is now replaced by the firefox snap. Package: firefox-locale-ur Description-md5: d15cd050c32905e98a17c6e306af019e Description-en: Transitional package - firefox-locale-ur -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-ur is now replaced by the firefox snap. Package: firefox-locale-uz Description-md5: 918b14a7bf056afe2bbde214069e4ddb Description-en: Transitional package - firefox-locale-uz -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-uz is now replaced by the firefox snap. Package: firefox-locale-vi Description-md5: 06552715adbc84a77ac085178eb08979 Description-en: Transitional package - firefox-locale-vi -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-vi is now replaced by the firefox snap. Package: firefox-locale-xh Description-md5: 567338baa84dbb461722bf549ca6ba03 Description-en: Transitional package - firefox-locale-xh -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-xh is now replaced by the firefox snap. Package: firefox-locale-zh-hans Description-md5: 346cc1faf31e074cbfa1959cae1bacf1 Description-en: Transitional package - firefox-locale-zh-hans -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-zh-hans is now replaced by the firefox snap. Package: firefox-locale-zh-hant Description-md5: b33a67706e0c0e0e25799bc29af6dab1 Description-en: Transitional package - firefox-locale-zh-hant -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-zh-hant is now replaced by the firefox snap. Package: firefox-locale-zu Description-md5: 0810bb3c7f100b42a924f7dcdcc35c5e Description-en: Transitional package - firefox-locale-zu -> firefox snap This is a transitional dummy package. It can safely be removed. . firefox-locale-zu is now replaced by the firefox snap. Package: frama-c-base Description-md5: 7f776b4ce1b1b979abde4a0a5b4fab94 Description-en: Platform dedicated to the analysis of source code written in C Frama-C gathers several analysis techniques in a single collaborative framework, based on analyzers (called "plug-ins") that can build upon the results computed by other analyzers in the framework. . Thanks to this approach, Frama-C provides sophisticated tools, including: * an analyzer based on abstract interpretation (Value plug-in); * a program proof framework based on weakest precondition calculus (WP plug-in); * a program slicer (Slicing plug-in); * a tool for verification of temporal (LTL) properties (Aoraï plug-in); * several tools for code base exploration and dependency analysis (plug-ins From, Impact, Metrics, Occurrence, Scope, etc.). . These plug-ins communicate between each other via the Frama-C API and via ACSL (ANSI/ISO C Specification Language) properties. . This package provides the library of Frama-c which is useful to build plugins for Frama-c, the command-line tools, and the graphical interface. Package: fwupd-amd64-signed-template Description-md5: 19d35f78650aadabde42d595495fc832 Description-en: Template for signed fwupd package This package is used to control code signing by the Debian signing service. Package: fwupd-unsigned Description-md5: 6ac8eb0218063e55ab61f28d7962c47b Description-en: Firmware update daemon (Unsigned EFI binaries) fwupd is a daemon to allow session software to update device firmware. You can either use a GUI software manager like GNOME Software to view and apply updates, the command-line tool or the system D-Bus interface directly. Firmware updates are supported for a variety of technologies. See for details . This package provides the EFI binaries used for UEFI capsule updates Package: fwupd-unsigned-dev Description-md5: 3762bbf184b5b856c9a9a3196969b9a2 Description-en: Firmware update daemon (Development information) fwupd is a daemon to allow session software to update device firmware. You can either use a GUI software manager like GNOME Software to view and apply updates, the command-line tool or the system D-Bus interface directly. Firmware updates are supported for a variety of technologies. See for details . This package provides the dependencies for the fwupd daemon to resolve Package: ghkl Description-md5: edc3e8a23ed4ecf703e455dd79835036 Description-en: diffractometer computation control application The hkl library is a framework for diffraction computation and diffractometer control, heavily used at the SOLEIL synchrotron. It supports various types of diffractometer geometry: Eulerian 4-circle, Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis geometry. For each of these it provides several numerically computed modes, such as bisector and constant psi. . This package provides a gui on top of the hkl library. Package: gir1.2-hkl-5.0 Description-md5: 7eafb95bafdb4dff92a9ae812015438e Description-en: diffractometer computation control library - gir binding The hkl library is a framework for diffraction computation and diffractometer control, heavily used at the SOLEIL synchrotron. It supports various types of diffractometer geometry: Eulerian 4-circle, Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis geometry. For each of these it provides several numerically computed modes, such as bisector and constant psi. . This package can be used by other packages using the GIRepository format to generate dynamic bindings. Package: gir1.2-malcontentui-1 Description-md5: 40489e347213a4e625abf542c1474637 Description-en: GObject introspection bindings for libmalcontent-ui malcontent implements support for restricting the type of content accessible to non-administrator accounts on a Linux system. Typically, when this is used, a non-administrator account will be for a child using the system; and the administrator accounts will be for the parents; and the content being filtered will be apps which are not suitable for the child to use, due to (for example) being too violent. . This is not a security boundary, and a sufficiently technically advanced user may always work around these parental controls. malcontent is not a mandatory access control (MAC) system like AppArmor or SELinux. However, its correct use by applications should provide enough of an obstacle to prevent users easily or accidentally having access to content which they shouldn’t. . This package contains the GObject introspection bindings for libmalcontent-ui. Package: gnome-shell-extension-prefs Description-md5: b750b0280408e85a2232c9f629868acf Description-en: tool to enable / disable GNOME Shell extensions This package contains a tool which users who use Shell extensions can use to toggle them on and off, and access their preferences. Package: golang-redhat-audit-dev Description-md5: 7e95a290b19e76ef3df32e571446b04d Description-en: Go client bindings for the libaudit library The package contains the Go bindings to libaudit that only allows for logging audit events. . This package contains the source. Package: gshutdown Description-md5: ee97b4df0e39068e484578e7e1eb9f2d Description-en: Graphical shutdown utility and shutdown timer GShutdown is a utility which allows you to schedule the shutdown or restart of your computer. With it you can simply and quickly choose the turn off time at either a specific time or after a countdown. . The graphical user interface uses Gtk+2. Package: hipcc Description-md5: 1f97055ba333de19165696e37636c1d1 Description-en: C++ Runtime API and Kernel Language for AMD and NVIDIA GPUs HIP (Heterogeneous Interface for Portability) is a C++ Runtime API and Kernel Language that allows developers to create portable applications for AMD and NVIDIA GPUs from single source code. . Key features include: . * HIP is very thin and has little or no performance impact over coding directly in CUDA mode; * HIP allows coding in a single-source C++ programming language including features such as templates, C++11 lambdas, classes, namespaces, and more; * HIP allows developers to use the "best" development environment and tools on each target platform; * the HIPify tools automatically convert source from CUDA to HIP; * developers can specialize for the platform (CUDA or AMD) to tune for performance or handle tricky cases. . New projects can be developed directly in the portable HIP C++ language and can run on either NVIDIA or AMD platforms. Additionally, HIP provides porting tools which make it easy to port existing CUDA codes to the HIP layer, with no loss of performance as compared to the original CUDA application. HIP is not intended to be a drop-in replacement for CUDA, and developers should expect to do some manual coding and performance tuning work to complete the port. . This package provides the compiler to compile the HIP source programs. Package: hipify-clang Description-md5: 8f72447e867761c277436126d1cbbfa2 Description-en: CUDA to HIP source-to-source translation tool hipify-clang is a tool that converts CUDA sources to HIP. It is built on libclang and operates on an abstract syntax tree. It can therefore translate code containing complex C++ constructs, but it requires input sources to be fully compilable. Package: hipify-perl Description-md5: 21cb059a462b3196e4fee5c7c3465823 Description-en: simple CUDA to HIP source-to-source translation tool hipify-perl is a simple tool that processes CUDA sources and converts them to HIP sources using textual replacements. It uses a simple perl parser and can therefore translate syntactically invalid inputs and source file fragments, but it may not recognize constructs that would require more context to correctly convert, such as macro expansions or namespace usage. Package: intel-ipu7-dkms Description-md5: b210162f39a76e864411c836c35cb09d Description-en: Intel Integrated Image Processing Unit 7 (IPU7) driver This package provides kernel drivers for MIPI cameras through the Intel IPU7 on Intel Lunar Lake or later platforms. Package: krdp Description-md5: 022169584f90dcbb63a6f973196ebc60 Description-en: KDE's RDP Server with a settings module for Plasma The package contains both an RDP server as well as a systemsettings module to configure an RDP server. Package: libamd-comgr-dev Description-md5: d5a216a4827796bee1a6050c23346184 Description-en: ROCm code object manager - development package The Code Object Manager is a shared library which provides operations for creating and inspecting LLVM code objects. See the documentation in the header file /usr/include/amd_comgr/amd_comgr.h . . This package contains the development files. Package: libamd-comgr3 Description-md5: 2a5ee0333556f125be633416c7925d8d Description-en: ROCm code object manager The Code Object Manager is a shared library which provides operations for creating and inspecting LLVM code objects. See the documentation in the header file /usr/include/amd_comgr/amd_comgr.h . Package: libamd-smi-dev Description-md5: 1efc0aeda71ce549ea2140fcddee03b6 Description-en: AMD System Management Interface - headers amdsmi (AMD System Management Interface Library) is a C library for Linux providing user space interfaces to monitor and control AMD GPU devices. . This package provides the amdsmi headers. Package: libamd-smi26 Description-md5: 8fcc26bb166c885fc4cf6eacbbdc0fb9 Description-en: AMD System Management Interface - library amdsmi (AMD System Management Interface Library) is a C library for Linux providing user space interfaces to monitor and control AMD GPU devices. . This package provides the amdsmi library. Package: libcalamares-dev Description-md5: ad4a5c068216d23a59b032985071c869 Description-en: Development files for Calamares Calamares is a distribution-independent installer framework. . It provides a graphical installer that can be used with nearly any distribution. This package is suitable for live media on Debian-based systems, and won't be of any particular use on an already installed system. . You will likely want to provide your own config files to match your distribution, reading the Calamares documentation will guide you through that process. . Development files for Calamares. Package: libcalamares3.3 Description-md5: 01a154256021d9497060ad68527a9923 Description-en: Shared object files for Calamares Calamares is a distribution-independent installer framework. . It provides a graphical installer that can be used with nearly any distribution. This package is suitable for live media on Debian-based systems, and won't be of any particular use on an already installed system. . You will likely want to provide your own config files to match your distribution, reading the Calamares documentation will guide you through that process. . Shared object files for Calamares. Package: libcalamaresui3.3 Description-md5: 3d638a807341c1be222445d52af3264e Description-en: UI shared object files for Calamares Calamares is a distribution-independent installer framework. . It provides a graphical installer that can be used with nearly any distribution. This package is suitable for live media on Debian-based systems, and won't be of any particular use on an already installed system. . You will likely want to provide your own config files to match your distribution, reading the Calamares documentation will guide you through that process. . UI shared object files for Calamares. Package: libcoq-mathcomp-abel Description-md5: 3adc2407c3df0e5de782fe2f159ef52b Description-en: Abel-Galois and Abel-Ruffini theorems for Mathematical Components This package provides proofs of the Abel-Galois (solvability by radicals and solvability of the Galois group) and of the Abel-Ruffini theorem (general unsolvability of the quintic equations) using the Mathematical Components library. . The Mathematical Components library is a coherent repository of general-purpose formalized mathematical theories for the Coq proof assistant. Package: libfdb5-0d Description-md5: cd6e1ead650e153a0cb2fb1875cfc8eb Description-en: Library for the ECMWF Fields Database FDB (Fields DataBase) is a domain-specific object store developed at ECMWF for storing, indexing and retrieving GRIB data. Each GRIB message is stored as a field and indexed trough semantic metadata (i.e. physical variables such as temperature, pressure, ...). A set of fields can be retrieved specifying a request using a specific language developed for accessing the MARS Archive. Package: libfdb5-dev Description-md5: d2ac0b8707fefe9576736d40e8f2de74 Description-en: Development files for the ECMWF Fields database FDB (Fields DataBase) is a domain-specific object store developed at ECMWF for storing, indexing and retrieving GRIB data. Each GRIB message is stored as a field and indexed trough semantic metadata (i.e. physical variables such as temperature, pressure, ...). A set of fields can be retrieved specifying a request using a specific language developed for accessing the MARS Archive. . This package provides shared libraries and headers. Package: libgoamdsmi-shim64-1 Description-md5: ede845c87460929309bf7f423703e450 Description-en: AMD System Management Interface - go library goamdsmi_shim (AMD System Management Interface Library) is a C library for Linux providing user space interfaces to monitor and control AMD GPU devices. . This package provides the go library for amdsmi_shim. Package: libgoamdsmi-shim64-dev Description-md5: 5a89c212a9fa27063be2888e3adfd638 Description-en: AMD System Management Interface - go headers goamdsmi_shim (AMD System Management Interface Library) is a C library for Linux providing user space interfaces to monitor and control AMD GPU devices. . This package provides the go headers for amdsmi_shim. Package: libhipblas-common-dev Description-md5: a10ad097245b193ce2d86254677bbc58 Description-en: Header-only common library for hipBLAS and hipBLASLt hipBLAS-common is a header-only library that provides shared type definitions, enumerations, and constants for AMD's HIP-based BLAS libraries: hipBLAS and hipBLASLt. It is a build-time dependency for both libraries, ensuring consistent type definitions across them. This package contains no compiled binaries and is intended solely for use at compile time. Package: libhkl-dev Description-md5: 0d7481b9aaeb30c4b8cca68ba9845573 Description-en: diffractometer computation control library - development files The hkl library is a framework for diffraction computation and diffractometer control, heavily used at the SOLEIL synchrotron. It supports various types of diffractometer geometry: Eulerian 4-circle, Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis geometry. For each of these it provides several numerically computed modes, such as bisector and constant psi. . This package provides everything needed to link against hkl. Package: libhkl-doc Description-md5: 959ca03ab47e3989c31ce0e866188eb5 Description-en: diffractometer computation control library - documentation The hkl library is a framework for diffraction computation and diffractometer control, heavily used at the SOLEIL synchrotron. It supports various types of diffractometer geometry: Eulerian 4-circle, Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis geometry. For each of these it provides several numerically computed modes, such as bisector and constant psi. . This package provides the documentation for hkl. Package: libhkl5 Description-md5: 4484aae662bf3580c01ca9a8a9e15855 Description-en: diffractometer computation control library The hkl library is a framework for diffraction computation and diffractometer control, heavily used at the SOLEIL synchrotron. It supports various types of diffractometer geometry: Eulerian 4-circle, Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis geometry. For each of these it provides several numerically computed modes, such as bisector and constant psi. . This package provides the runtime hkl library. Package: libhsa-runtime-dev Description-md5: a43df1a7a825b65ac5f03fb39ff420b1 Description-en: HSA Runtime API and runtime for ROCm - development files This library provides user-mode API interfaces necessary for host applications to launch compute kernels to available HSA ROCm kernel agents. . This package contains the development headers. Package: libhsa-runtime64-1 Description-md5: 3b6dc07958d486a817a5f2ac17827c4a Description-en: HSA Runtime API and runtime for ROCm This library provides user-mode API interfaces necessary for host applications to launch compute kernels to available HSA ROCm kernel agents. Package: libhsa-runtime64-tests Description-md5: 439f862acd511de616010d91ed48a036 Description-en: HSA Runtime test suites for ROCm This package provides Runtime test suites for HSA implementation validation and performance testing Package: liblomiri-thumbnailer-qt-dev Description-md5: d3cdc549ede6550f492d0b9cdd41894c Description-en: Qt/C++ API to obtain thumbnails (development files) Lomiri Thumbnailer is an API for the Lomiri operating environment to create and cache image thumbnails for local and remote media. . Library providing a client API for obtaining thumbnails from the DBus service. . This package provides the development files for the library. Package: liblomiri-thumbnailer-qt1.0 Description-md5: 118a884cdf727986556c0a172cff49da Description-en: Qt/C++ API to obtain thumbnails Lomiri Thumbnailer is an API for the Lomiri operating environment to create and cache image thumbnails for local and remote media. . Library providing a client API for obtaining thumbnails from the DBus service. Package: liblxc-common Description-md5: 64c1c87f38b94cdcf67f746e6c6223fd Description-en: Linux Containers userspace tools (library) Containers are insulated areas inside a system, which have their own namespace for filesystem, network, PID, IPC, CPU and memory allocation and which can be created using the Control Group and Namespace features included in the Linux kernel. . This package contains the common files for the shared library Package: liblxc1t64 Description-md5: 1e0f601ab32a2567bee52c30378f862a Description-en: Linux Containers userspace tools (library) Containers are insulated areas inside a system, which have their own namespace for filesystem, network, PID, IPC, CPU and memory allocation and which can be created using the Control Group and Namespace features included in the Linux kernel. . This package contains the shared library. Package: libmalcontent-ui-1-1 Description-md5: b6c3cfeeb9ed4541d6813afded892640 Description-en: library for parental control of applications - GTK widgets and dialogs malcontent implements support for restricting the type of content accessible to non-administrator accounts on a Linux system. Typically, when this is used, a non-administrator account will be for a child using the system; and the administrator accounts will be for the parents; and the content being filtered will be apps which are not suitable for the child to use, due to (for example) being too violent. . This is not a security boundary, and a sufficiently technically advanced user may always work around these parental controls. malcontent is not a mandatory access control (MAC) system like AppArmor or SELinux. However, its correct use by applications should provide enough of an obstacle to prevent users easily or accidentally having access to content which they shouldn’t. . This package contains the libmalcontent-ui library to display GTK widgets and dialogs. Package: libmalcontent-ui-dev Description-md5: 189479712137aef4e70070a85a7ca584 Description-en: development files for libmalcontent-ui malcontent implements support for restricting the type of content accessible to non-administrator accounts on a Linux system. Typically, when this is used, a non-administrator account will be for a child using the system; and the administrator accounts will be for the parents; and the content being filtered will be apps which are not suitable for the child to use, due to (for example) being too violent. . This is not a security boundary, and a sufficiently technically advanced user may always work around these parental controls. malcontent is not a mandatory access control (MAC) system like AppArmor or SELinux. However, its correct use by applications should provide enough of an obstacle to prevent users easily or accidentally having access to content which they shouldn’t. . This package contains the development files for libmalcontent-ui. Package: libmetkit-data Description-md5: e17aed0c2e16f83f05902006ac4a1168 Description-en: Data used by the ECMWF Metkit Library MetKit is a toolkit from ECMWF for manipulating and describing meteorological objects, implementing the MARS language and associated processing and semantics. . This package contains data used by Metkit Package: libmetkit-dev Description-md5: b404f9e9f4b2eda46ac44f899fd39740 Description-en: Development files for the Metkit toolkit MetKit is a toolkit from ECMWF for manipulating and describing meteorological objects, implementing the MARS language and associated processing and semantics. . This package provides shared libraries and headers. Package: libmetkit-utils Description-md5: 18ec69375ccc709635f8cf67931673dc Description-en: Utilities for the MetKit MARS access library MetKit is a toolkit from ECMWF for manipulating and describing meteorological objects, implementing the MARS language and associated processing and semantics. . This package contains the tool 'parse-mars-request' Package: libmetkit0d Description-md5: ffd1c836e3d87e69b2df136b1d6bd4dc Description-en: Library for Meteorology tookit, implementing MARS language MetKit is a toolkit from ECMWF for manipulating and describing meteorological objects, implementing the MARS language and associated processing and semantics. MARS is the Meteorological Archive Retrieval System from ECMWF. Package: libmetview-dev Description-md5: aab56829c1a4f7ec880dc0283fb8b3eb Description-en: Development files for MetView Metview has been designed as a flexible, modular and extendible system able to accommodate the evolving needs of the user. The system is based on the ECMWF standards for graphics (Magics) and data access (MARS) but can also access locally stored data. The user interface is based on Motif and Qt. Metview is a fully distributed system where modules can run on different workstations and servers. . This package provides static libraries and include files for building Metview-based software. Package: libmetview0d Description-md5: 538ea032789f4cb1b8c6534dbc24d0df Description-en: Shared libraries for MetView Metview has been designed as a flexible, modular and extendible system able to accommodate the evolving needs of the user. The system is based on the ECMWF standards for graphics (Magics) and data access (MARS) but can also access locally stored data. The user interface is based on Motif and Qt. Metview is a fully distributed system where modules can run on different workstations and servers. . This package provides shared libraries and for Metview-based software. Package: libmutter-test-18 Description-md5: 0e619df20013f2831da3a5dfc3597711 Description-en: Test helper library for GNOME's window manager library Mutter is a Wayland display server and X11 window manager and compositor library. It contains functionality related to, among other things, window management, window compositing, focus tracking, workspace management, keybindings and monitor configuration. . This package contains a private library used by the automated tests for mutter and gnome-shell. It should not be used by non-GNOME packages. Package: libnss-libvirt Description-md5: c74cf9f1252c4873853aa409030d9c12 Description-en: virtualization library - NSS plugins libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains two NSS plugins: the 'libvirt_guests' plugin resolves the name of the domain to its IP address, while the 'libvirt' plugin looks at the hostname configured inside the guest OS instead. Both can be enabled at the same time. Package: libnss-libvirt-hwe Description-md5: 90e3bfac498ce38f20aa3b1b53682095 Description-en: virtualization library - NSS plugins This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains two NSS plugins: the 'libvirt_guests' plugin resolves the name of the domain to its IP address, while the 'libvirt' plugin looks at the hostname configured inside the guest OS instead. Both can be enabled at the same time. Package: libnss-malcontent Description-md5: 74904758315d27a0ee1bed2f4fcf3f0a Description-en: NSS module providing web filtering malcontent implements support for restricting the type of content accessible to non-administrator accounts on a Linux system. Typically, when this is used, a non-administrator account will be for a child using the system; and the administrator accounts will be for the parents; and the content being filtered will be apps which are not suitable for the child to use, due to (for example) being too violent. . This is not a security boundary, and a sufficiently technically advanced user may always work around these parental controls. malcontent is not a mandatory access control (MAC) system like AppArmor or SELinux. However, its correct use by applications should provide enough of an obstacle to prevent users easily or accidentally having access to content which they shouldn’t. . This package contains an NSS module implementing the `gethostbyname()` functions, which applies a user-specific filter list to all name lookup requests to allow filtering websites. . Installing this package automatically adds the module to /etc/nsswitch.conf. Package: liboam-dev Description-md5: 1eb5e107c285a53e4390e8ac4e9e2c36 Description-en: Datacenter flavor of a GPU system-management API headers OCP Accelerator Module (OAM), is an Open Compute Project (OCP) hardware standard, used in datacenters and high-performance-computing (HPC) clusters. This library is the sibling of the ROCm System Management Interface (SMI) Application Programming Interface (API), targeted at OAMs. . This package contains the development headers. Package: liboam7 Description-md5: 9228e2fe2c2bbf4cb5c819a156e4659d Description-en: Datacenter flavor of a GPU system-management API OCP Accelerator Module (OAM), is an Open Compute Project (OCP) hardware standard, used in datacenters and high-performance-computing (HPC) clusters. This library is the sibling of the ROCm System Management Interface (SMI) Application Programming Interface (API), targeted at OAMs. Package: libopenshot-audio-dev Description-md5: 3fd7dc237b3e5ed2601c94a4040cf1bd Description-en: development files for the OpenShot audio library The OpenShot audio library is a program which allows high-quality editing and playback of audio based on the JUCE library. . This package provides the development files. Package: libopenshot-audio-doc Description-md5: 16f42549fa26d965998b4a7457618efa Description-en: documentation for the OpenShot audio library The OpenShot audio library is a program which allows high-quality editing and playback of audio based on the JUCE library. . This package provides the documentation. Package: libopenshot-audio-test-sound Description-md5: 325f0bc0697f11e338f50df8443334be Description-en: plays test sound using libopenshot-audio The OpenShot audio library is a program which allows high-quality editing and playback of audio based on the JUCE library. . This package provides the test binary to test the sound using libopenshot-audio. Package: libopenshot-audio10 Description-md5: ee5da53019df3890000816b7b9043907 Description-en: library for high-quality audio editing The OpenShot audio library is a program which allows high-quality editing and playback of audio based on the JUCE library. . This package provides the shared library. Package: libpam-cgfs Description-md5: e709f3eddd48d5ce8595be4d003fd4f5 Description-en: PAM module for managing cgroups for LXC LXCFS provides a FUSE based filesystem to improve the LXC experience within the containers. . This provides a Pluggable Authentication Module (PAM) to provide logged-in users with a set of cgroups which they can administer. This allows for instance unprivileged containers, and session management using cgroup process tracking. Package: libpfm4 Description-md5: 0bcc80034d18de9750e5f9ac06aedd9b Description-en: Library to program the performance monitoring events Libpfm4 helps convert from an event name, expressed as a string, to the event encoding. The encoding can then be used with specific OS interfaces. Libpfm4 also provides OS-specific interfaces to directly setup OS-specific data structures to be passed to the kernel. The current libpfm4, for instance, provides support for the perf_events interface which was introduced in Linux v2.6.31. . This package provides the shared library. Package: libpfm4-dev Description-md5: 3872a46e131fdb997e3bbc1d835eaf29 Description-en: Development files for the libpfm4 library Libpfm4 helps convert from an event name, expressed as a string, to the event encoding. The encoding can then be used with specific OS interfaces. Libpfm4 also provides OS-specific interfaces to directly setup OS-specific data structures to be passed to the kernel. The current libpfm4, for instance, provides support for the perf_events interface which was introduced in Linux v2.6.31. . This package provides the development files of the library. Package: libpipewire-0.3-modules-extra Description-md5: 850c30942e95114bc2463b8f98ef23a0 Description-en: libraries for the PipeWire multimedia server - extra modules PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains the ffado driver module. Package: libpipewire-0.3-modules-x11 Description-md5: bc8ef3ab07b2505388b17ccf79d5a7ee Description-en: libraries for the PipeWire multimedia server - X11 modules PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains X11 modules. Package: librocalution-dev Description-md5: 44649142299973a18c60183ac479f0f0 Description-en: ROCm library for iterative sparse solvers - headers rocALUTION is a library that provides iterative sparse preconditioners and solvers. The rocALUTION project began as a port of PARALUTION to the AMD ROCm platform. This library supports an OpenMP backend for multi-core CPUs and an MPI backend for multi-node clusters. . rocALUTION provides a C++ API containing implementations of fixed-point iteration schemes such as Jacobi iteration and Gauss-Seidel; Krylov subspace methods such as the conjugate gradient method and the biconjugate gradient stabilized method; a mixed-precision defect correction scheme; a Chebyshev iteration scheme; as well as geometric and algebraic multigrid solvers. There are also a wide variety of sparse preconditioners, including several based on matrix splitting schemes, factorization schemes, and approximate inverses. . This package provides the AMD ROCm rocALUTION development headers. Package: librocalution-doc Description-md5: 66927a5abab1be031d7d25878b1231bc Description-en: ROCm library for iterative sparse solvers - documentation rocALUTION is a library that provides iterative sparse preconditioners and solvers. The rocALUTION project began as a port of PARALUTION to the AMD ROCm platform. This library supports an OpenMP backend for multi-core CPUs and an MPI backend for multi-node clusters. . rocALUTION provides a C++ API containing implementations of fixed-point iteration schemes such as Jacobi iteration and Gauss-Seidel; Krylov subspace methods such as the conjugate gradient method and the biconjugate gradient stabilized method; a mixed-precision defect correction scheme; a Chebyshev iteration scheme; as well as geometric and algebraic multigrid solvers. There are also a wide variety of sparse preconditioners, including several based on matrix splitting schemes, factorization schemes, and approximate inverses. . This package provides the AMD ROCm rocALUTION documentation. Package: librocalution1 Description-md5: 57415c15172f78830396d5dcd9ef89a0 Description-en: ROCm library for iterative sparse solvers - library rocALUTION is a library that provides iterative sparse preconditioners and solvers. The rocALUTION project began as a port of PARALUTION to the AMD ROCm platform. This library supports an OpenMP backend for multi-core CPUs and an MPI backend for multi-node clusters. . rocALUTION provides a C++ API containing implementations of fixed-point iteration schemes such as Jacobi iteration and Gauss-Seidel; Krylov subspace methods such as the conjugate gradient method and the biconjugate gradient stabilized method; a mixed-precision defect correction scheme; a Chebyshev iteration scheme; as well as geometric and algebraic multigrid solvers. There are also a wide variety of sparse preconditioners, including several based on matrix splitting schemes, factorization schemes, and approximate inverses. . This package provides the AMD ROCm rocALUTION library. Package: librocalution1-tests Description-md5: 57fa9026bd5b402d652be5fe281a4cfd Description-en: ROCm library for iterative sparse solvers - tests rocALUTION is a library that provides iterative sparse preconditioners and solvers. The rocALUTION project began as a port of PARALUTION to the AMD ROCm platform. This library supports an OpenMP backend for multi-core CPUs and an MPI backend for multi-node clusters. . rocALUTION provides a C++ API containing implementations of fixed-point iteration schemes such as Jacobi iteration and Gauss-Seidel; Krylov subspace methods such as the conjugate gradient method and the biconjugate gradient stabilized method; a mixed-precision defect correction scheme; a Chebyshev iteration scheme; as well as geometric and algebraic multigrid solvers. There are also a wide variety of sparse preconditioners, including several based on matrix splitting schemes, factorization schemes, and approximate inverses. . This package provides the AMD ROCm rocALUTION test binaries used for verifying that the library is functioning correctly. Package: librocm-smi-dev Description-md5: ef23fc9e0a6805ffd424d1d6162bbc2c Description-en: ROCm System Management Interface (ROCm SMI) library headers ROCm SMI is part of the ROCm software stack. It is a C library for Linux that provides a user-space interface for applications to monitor and control GPU applications. . This package contains the development headers. Package: librocm-smi64-7 Description-md5: 026433d45cc38b5e7f9eed95abe3536f Description-en: ROCm System Management Interface (ROCm SMI) library The ROCm System Management Interface Library, or ROCm SMI library, is part of the ROCm software stack. It is a C library for Linux that provides a user space interface for applications to monitor and control GPU applications. Package: libspa-0.2-jack Description-md5: fcaebf5c28cc8f2b8e8f649522f2fa89 Description-en: libraries for the PipeWire multimedia server - JACK client PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains a plugin to make PipeWire able to connect to a JACK server, which will be used for audio playback and recording. Package: libspa-0.2-modules-extra Description-md5: d5cf43e6dcd4761717d090c49c24f6fc Description-en: libraries for the PipeWire multimedia server Simple Plugin API - extra modules PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains the ebur128, lv2, onnx and sofa filter-chain modules and the bluetooth aac codec. Package: libvirt-clients-qemu Description-md5: d79e49830cf742392368297f08d036ea Description-en: virtualization library - clients (QEMU specific) libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains a number of clients that are specifically for use with the QEMU connection driver, e.g. a proxy for the QMP protocol. Package: libvirt-clients-qemu-hwe Description-md5: 1801ae5bada79000a382e70bf5c18226 Description-en: virtualization library - clients (QEMU specific) This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains a number of clients that are specifically for use with the QEMU connection driver, e.g. a proxy for the QMP protocol. Package: libvirt-daemon-driver-lxc Description-md5: ca2e42014970d5eaf7e708d06d6e1491 Description-en: virtualization daemon - LXC connection driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the LXC connection driver. Package: libvirt-daemon-driver-lxc-hwe Description-md5: a416f90a3403d1285b296d57ddc55814 Description-en: virtualization daemon - LXC connection driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the LXC connection driver. Package: libvirt-daemon-driver-storage-gluster Description-md5: 831227ba22b9f406fcc3cbaacc04d783 Description-en: virtualization daemon - GlusterFS storage driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for GlusterFS. Package: libvirt-daemon-driver-storage-gluster-hwe Description-md5: 050e1d1aea3ecfcbaa0bd93318dadb33 Description-en: virtualization daemon - GlusterFS storage driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for GlusterFS. Package: libvirt-daemon-driver-storage-iscsi-direct Description-md5: 350b7fb146846229fad16f440c36c84a Description-en: virtualization daemon - iSCSI (libiscsi) storage driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for iSCSI volumes, implemented using libiscsi. Package: libvirt-daemon-driver-storage-iscsi-direct-hwe Description-md5: b22d9ee1b21ea5f8a7dd03f058ce5057 Description-en: virtualization daemon - iSCSI (libiscsi) storage driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for iSCSI volumes, implemented using libiscsi. Package: libvirt-daemon-driver-storage-rbd Description-md5: 9824e3e02521a6e0c03d94b6fd75e3f0 Description-en: virtualization daemon - RBD/RADOS/Ceph storage driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for RBD/RADOS/Ceph. Package: libvirt-daemon-driver-storage-rbd-hwe Description-md5: e477909744986431984c12a48a5f6948 Description-en: virtualization daemon - RBD/RADOS/Ceph storage driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for RBD/RADOS/Ceph. Package: libvirt-daemon-driver-storage-zfs Description-md5: f1b67fd0d6ee2b797f3f2cc162c99eaa Description-en: virtualization daemon - ZFS storage driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for ZFS. Package: libvirt-daemon-driver-storage-zfs-hwe Description-md5: 3c34e26cf4d5fe81407ecfd87399cd2e Description-en: virtualization daemon - ZFS storage driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the storage driver for ZFS. Package: libvirt-daemon-driver-vbox Description-md5: 6cac742650055375a02afb889b5f3acc Description-en: virtualization daemon - VirtualBox connection driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the VirtualBox connection driver. Package: libvirt-daemon-driver-vbox-hwe Description-md5: a62c29900d77e86e4293e66645ad8725 Description-en: virtualization daemon - VirtualBox connection driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the VirtualBox connection driver. Package: libvirt-daemon-driver-xen Description-md5: e9a0dc3639475356c140a07820252356 Description-en: virtualization daemon - Xen connection driver libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the Xen connection driver. Package: libvirt-daemon-driver-xen-hwe Description-md5: a4ea14f219281720648e3e1bf1aec981 Description-en: virtualization daemon - Xen connection driver This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the Xen connection driver. Package: libvirt-daemon-plugin-sanlock Description-md5: f627862f19b542c7c85ec382f95e254c Description-en: virtualization daemon - locking plugin (sanlock) libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the plugin that implements disk locking using sanlock. Package: libvirt-daemon-plugin-sanlock-hwe Description-md5: ed0009a1a5c54f5ae922bf0f0c4c34d3 Description-en: virtualization daemon - locking plugin (sanlock) This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the plugin that implements disk locking using sanlock. Package: libvirt-daemon-system-systemd Description-md5: c7d1a0b80f4325b34d72942a87dea1cd Description-en: transitional dummy package This is a transitional dummy package and can be safely removed. Package: libvirt-daemon-system-systemd-hwe Description-md5: 75089c0d704ed75b0cbe80fa96bc22a0 Description-en: transitional dummy package This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . This is a transitional dummy package and can be safely removed. Package: libvirt-daemon-system-sysv Description-md5: c7d1a0b80f4325b34d72942a87dea1cd Description-en: transitional dummy package This is a transitional dummy package and can be safely removed. Package: libvirt-daemon-system-sysv-hwe Description-md5: 75089c0d704ed75b0cbe80fa96bc22a0 Description-en: transitional dummy package This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . This is a transitional dummy package and can be safely removed. Package: libvirt-dev Description-md5: 5480a0e0c0772ebb4cb4b40e4a16ea6b Description-en: virtualization library - development files libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the header files and other supporting files that are needed when developing applications that use libvirt. Package: libvirt-dev-hwe Description-md5: a399e2d955f636de25b9ce447246c2ac Description-en: virtualization library - development files This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the header files and other supporting files that are needed when developing applications that use libvirt. Package: libvirt-doc-hwe Description-md5: 3f33c936be16ce775c9ddd9c80ac3259 Description-en: virtualization library - documentation This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the documentation for the library. Package: libvirt-login-shell Description-md5: bbcadac8e7091588a5aa9bd02c3bea4b Description-en: isolate user sessions using LXC containers libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the virt-login-shell tool, which can be set as a user's login shell to isolate their sessions using LXC containers. Package: libvirt-login-shell-hwe Description-md5: e03d6c10b2702e11c95b5c0ac49f98ff Description-en: isolate user sessions using LXC containers This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the virt-login-shell tool, which can be set as a user's login shell to isolate their sessions using LXC containers. Package: libvirt-sanlock Description-md5: c7d1a0b80f4325b34d72942a87dea1cd Description-en: transitional dummy package This is a transitional dummy package and can be safely removed. Package: libvirt-sanlock-hwe Description-md5: 75089c0d704ed75b0cbe80fa96bc22a0 Description-en: transitional dummy package This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . This is a transitional dummy package and can be safely removed. Package: libvirt-ssh-proxy Description-md5: fa86a12fad044173f36151b437fa21f9 Description-en: virtualization library - SSH proxy libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . When this package is installed, ssh will be able to connect to locally running libvirt domains via VSOCK. Package: libvirt-ssh-proxy-hwe Description-md5: 9c089f59515749d67563bb7dba4f3ecf Description-en: virtualization library - SSH proxy This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . When this package is installed, ssh will be able to connect to locally running libvirt domains via VSOCK. Package: libvirt-wireshark Description-md5: fad70ce533be6046e9bd327ca164215d Description-en: virtualization library - Wireshark dissector libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the Wireshark dissector. Package: libvirt-wireshark-hwe Description-md5: f936529652d696cd9e816022bc86d832 Description-en: virtualization library - Wireshark dissector This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . libvirt exposes a long-term stable API that can be used to interact with various hypervisors. Its architecture is highly modular, with most features implemented as optional drivers. It can be used from C as well as several other programming languages, and it forms the basis of virtualization solutions tailored for a range of use cases. . This package contains the Wireshark dissector. Package: lomiri-telephony-service Description-md5: d4b0445bdf3b6e4a33fcacf2cf88db48 Description-en: Telephony service components for Lomiri - service daemon Telephony service components for Lomiri. . This package contains the backend components providing the telephony features such as calling and texting. Package: lomiri-thumbnailer-service Description-md5: 8a6bfd248ce60644880fa594ef9e1c74 Description-en: D-Bus service for out of process thumbnailing Lomiri Thumbnailer is an API for the Lomiri operating environment to create and cache image thumbnails for local and remote media. . This package provides thumbnailer D-Bus service that can provide thumbnails on behalf of another process. Package: lxc Description-md5: 4ece0dffd153c29e95ffdb89f8238dfc Description-en: Linux Containers userspace tools Containers are insulated areas inside a system, which have their own namespace for filesystem, network, PID, IPC, CPU and memory allocation and which can be created using the Control Group and Namespace features included in the Linux kernel. . This package provides the lxc-* tools, which can be used to start a single daemon in a container, or to boot an entire "containerized" system, and to manage and debug your containers. Package: lxc-dev Description-md5: c719178b7e79ce1ed39519707c589961 Description-en: Linux Containers userspace tools (development) Containers are insulated areas inside a system, which have their own namespace for filesystem, network, PID, IPC, CPU and memory allocation and which can be created using the Control Group and Namespace features included in the Linux kernel. . This package contains the development files. Package: lxc-tests Description-md5: e03094a7d4b1a574890d104af255c273 Description-en: Linux Containers userspace tools (test binaries) Containers are insulated areas inside a system, which have their own namespace for filesystem, network, PID, IPC, CPU and memory allocation and which can be created using the Control Group and Namespace features included in the Linux kernel. . This package contains the test binaries. Those binaries are primarily used for autopkgtest and by some developers. They are not meant to be installed on regular user systems. Package: lxqt-panel Description-md5: 73914c94b8d38c61c2e1ad1c38c5707f Description-en: LXQt desktop panel The LXQt desktop panel . This package contains the LXQt panel. Package: lxqt-panel-l10n Description-md5: 4c97fdb49a8327033263b5587057a385 Description-en: Language package for lxqt-panel The l10n files for lxqt-panel. . This package contains the l10n files needed by lxqt-panel. Package: malcontent-gui Description-md5: d8f3d7c1e9386f98e19fa6f376262e19 Description-en: GUI to configure malcontent malcontent implements support for restricting the type of content accessible to non-administrator accounts on a Linux system. Typically, when this is used, a non-administrator account will be for a child using the system; and the administrator accounts will be for the parents; and the content being filtered will be apps which are not suitable for the child to use, due to (for example) being too violent. . This is not a security boundary, and a sufficiently technically advanced user may always work around these parental controls. malcontent is not a mandatory access control (MAC) system like AppArmor or SELinux. However, its correct use by applications should provide enough of an obstacle to prevent users easily or accidentally having access to content which they shouldn’t. . This package contains the GUI to configure malcontent. Package: masakari-instance-monitor Description-md5: e1047fdb4f7b119ce91dc9fa9749cb99 Description-en: Virtual Machine High Availability (VMHA) for OpenStack - Instance Monitor Monitors for Masakari provides Virtual Machine High Availability (VMHA) service for OpenStack clouds by automatically detecting the failure events such as VM process down, provisioning process down, and nova-compute host failure. If it detect the events, it sends notifications to the masakari-api. . This package contains the Masakari Instance Monitor. Package: masakari-introspective-instance-monitor Description-md5: edfb6419561c44b8d0addd0d1b63ae95 Description-en: Virtual Machine High Availability (VMHA) for OpenStack - Introspective Instance Monitor Monitors for Masakari provides Virtual Machine High Availability (VMHA) service for OpenStack clouds by automatically detecting the failure events such as VM process down, provisioning process down, and nova-compute host failure. If it detect the events, it sends notifications to the masakari-api. . This package contains the Masakari Introspective Instance Monitor. Package: masakari-process-monitor Description-md5: 1df2557f17b6ded122d59173792d6266 Description-en: Virtual Machine High Availability (VMHA) for OpenStack - Process Monitor Monitors for Masakari provides Virtual Machine High Availability (VMHA) service for OpenStack clouds by automatically detecting the failure events such as VM process down, provisioning process down, and nova-compute host failure. If it detect the events, it sends notifications to the masakari-api. . This package contains the Masakari Process Monitor. Package: metview Description-md5: 4ce04e442ecad0f65501d065fffe6dd1 Description-en: Interactive data visualization and analysis environment, Metview has been designed as a flexible, modular and extendible system able to accommodate the evolving needs of the user. The system is based on the ECMWF standards for graphics (Magics) and data access (MARS) but can also access locally stored data. The user interface is based on Motif and Qt. Metview is a fully distributed system where modules can run on different workstations and servers. . Metview is a cooperative project between ECMWF and INPE/CPTEC, Brazil. ECMWF has also been assisted by a staff member of Météo-France. Package: metview-data Description-md5: de58bbb93806f5fb6268e18d9b80dcb7 Description-en: Data needed for the Metview data analysis environment Metview has been designed as a flexible, modular and extendible system able to accommodate the evolving needs of the user. The system is based on the ECMWF standards for graphics (Magics) and data access (MARS) but can also access locally stored data. The user interface is based on Motif and Qt. Metview is a fully distributed system where modules can run on different workstations and servers. . This package provides data files needed for metvieww. Package: mutter Description-md5: e1aaf47f1a0045c06fca32ec80a0a883 Description-en: Example window manager using GNOME's window manager library Mutter is a Wayland display server and X11 window manager and compositor library. It contains functionality related to, among other things, window management, window compositing, focus tracking, workspace management, keybindings and monitor configuration. . Internally it uses a fork of Cogl, a hardware acceleration abstraction library used to simplify usage of OpenGL pipelines, as well as a fork of Clutter, a scene graph and user interface toolkit. . This package contains the mutter executable. It can be used as a standalone window manager, but is primarily intended for debugging. Package: mutter-18-tests Description-md5: 28acabf81cb16f554020f24fceba63a1 Description-en: Tests for GNOME's window manager library Mutter is a Wayland display server and X11 window manager and compositor library. It contains functionality related to, among other things, window management, window compositing, focus tracking, workspace management, keybindings and monitor configuration. . Internally it uses a fork of Cogl, a hardware acceleration abstraction library used to simplify usage of OpenGL pipelines, as well as a fork of Clutter, a scene graph and user interface toolkit. . This package contains test programs, designed to be run as part of a regression testsuite. Package: mutter-dev-bin Description-md5: cac3725ea18316ef47b4c0bc5628a86c Description-en: Development programs for the Mutter window manager Mutter is a Wayland display server and X11 window manager and compositor library. It contains functionality related to, among other things, window management, window compositing, focus tracking, workspace management, keybindings and monitor configuration. . Internally it uses a fork of Cogl, a hardware acceleration abstraction library used to simplify usage of OpenGL pipelines, as well as a fork of Clutter, a scene graph and user interface toolkit. . This package contains the Mutter Development Kit. Package: neutron-macvtap-agent Description-md5: e60c41b51b193c7b7bd59c74ab9bbcd9 Description-en: Neutron is a virtual network service for Openstack - Macvtap L2 Agent Neutron is a virtual network service for Openstack, and a part of Netstack. Just like OpenStack Nova provides an API to dynamically request and configure virtual servers, Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (e.g., virtual NICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities (e.g., QoS, ACLs, network monitoring, etc.) . This package provides the Macvtap L2 Agent. Package: neutron-metering-agent Description-md5: 65dae36f4a24be77bcb88d08a02f05f3 Description-en: Neutron is a virtual network service for Openstack - metering agent Neutron is a virtual network service for Openstack, and a part of Netstack. Just like OpenStack Nova provides an API to dynamically request and configure virtual servers, Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (e.g., virtual NICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities (e.g., QoS, ACLs, network monitoring, etc.) . This package provides the metering agent. Package: neutron-ovn-agent Description-md5: f37bb656bec6673216dfb7a85a978f8d Description-en: OpenStack virtual network service - OVN agent Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (such as vNICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities, including QoS, ACLs, and network monitoring. . This package provides the OVN agent. Package: neutron-ovn-maintenance-worker Description-md5: 57611fd2885f7d5d014f2568da7f062b Description-en: Neutron is a virtual network service for Openstack - OVN maintenance worker Neutron is a virtual network service for Openstack, and a part of Netstack. Just like OpenStack Nova provides an API to dynamically request and configure virtual servers, Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (e.g., virtual NICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities (e.g., QoS, ACLs, network monitoring, etc.) . This package provides the OVN maintenance worker and should be used when running Neutron API under WSGI for OVN deployments. Package: neutron-plugin-ml2 Description-md5: 04c3b1da612333dffe94afb38e17f6ee Description-en: Neutron is a virtual network service for Openstack - ML2 plugin Neutron is a virtual network service for Openstack, and a part of Netstack. Just like OpenStack Nova provides an API to dynamically request and configure virtual servers, Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (e.g., virtual NICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities (e.g., QoS, ACLs, network monitoring, etc.) . This package provides the Modular Layer 2 plugin. Package: neutron-sriov-agent Description-md5: 42989299f1b85c4fc6eccec9138ca534 Description-en: Neutron is a virtual network service for Openstack - SR-IOV agent Neutron is a virtual network service for Openstack, and a part of Netstack. Just like OpenStack Nova provides an API to dynamically request and configure virtual servers, Neutron provides an API to dynamically request and configure virtual networks. These networks connect "interfaces" from other OpenStack services (e.g., virtual NICs from Nova VMs). The Neutron API supports extensions to provide advanced network capabilities (e.g., QoS, ACLs, network monitoring, etc.) . This package provides the Mellanox SR-IOV agent. Package: ovmf-legacy Description-md5: 2483e1903778611af8a30304f53d75bd Description-en: UEFI firmware for 64-bit x86 VMs, enabling legacy features Open Virtual Machine Firmware is a build of EDK II for 64-bit x86 virtual machines. It includes support for UEFI and enables legacy features, such as ParaVirtual SCSI (PVSCSI), that might not be fully supported by the upstream developers. Therefore, this legacy firmware is provided on an as-is basis. Package: ovmf-legacy-hwe Description-md5: edfb9c9f0fcd6219cdabb64de7d85203 Description-en: UEFI firmware for 64-bit x86 VMs, enabling legacy features This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . Open Virtual Machine Firmware is a build of EDK II for 64-bit x86 virtual machines. It includes support for UEFI and enables legacy features, such as ParaVirtual SCSI (PVSCSI), that might not be fully supported by the upstream developers. Therefore, this legacy firmware is provided on an as-is basis. Package: pipewire-audio-client-libraries Description-md5: 0732b1c01b478a2ed0c129a9fe3a209f Description-en: transitional package for pipewire-alsa and pipewire-jack PipeWire is a server and user space API to deal with multimedia pipelines. . This is a transitional package for pipewire-alsa and pipewire-jack. It can safely be removed. Package: pipewire-jack Description-md5: acc44f7143ade87554934b4b71d66351 Description-en: PipeWire JACK plugin, for JACK applications to output via PipeWire PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains a plugin for JACK applications to output via PipeWire. Package: pipewire-libcamera Description-md5: 0aa4b5bae7b9f41e7390bea4f78d206f Description-en: transitional package for libspa-0.2-libcamera PipeWire is a server and user space API to deal with multimedia pipelines. . This is a transitional package for libspa-0.2-libcamera. It can safely be removed. Package: pipewire-system-services Description-md5: 99c6357e56bfbb5b777901c2a2949cea Description-en: audio and video processing engine multimedia server (system services) PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains the systemd system services. NOTE: This is NOT the recommended way to use PipeWire, but these services are provided for specific use cases like embedded and accessibility. Package: pipewire-tests Description-md5: 5d0a13850b762e4211c904f541a2b90b Description-en: PipeWire multimedia server - tests and examples PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains automated and manual tests and example programs. Package: pipewire-v4l2 Description-md5: 17978fbe0dce8313a6f723359aa6aa78 Description-en: PipeWire V4L2 plugin PipeWire is a server and user space API to deal with multimedia pipelines. This includes: . - Making available sources of audio and video (such as from a capture devices or application provided streams) and multiplexing this with clients. - Accessing sources of audio and video for consumption. - Generating graphs for audio and video processing. . This package contains the V4L2 plugin. Package: pkg-rocm-tools Description-md5: 364e01e77c952a4b8d0e89dd4aea1045 Description-en: Utilities for adding ROCm support to packages This package contains various utilities which should facilitate adding ROCm support in packages. . These include: * rocm-test-launcher Launches tests making use of AMD GPUs, and optionally exports system information . Currently, this only works with amd64 guests on amd64 hosts. Package: python-cogent-doc Description-md5: c500b1c82c580b2eec9f3cdab53c4831 Description-en: docs for python3-cogent3 PyCogent is a software library for genomic biology. . It is distinguished by many unique built-in capabilities (such as true codon alignment) and the frequent addition of entirely new methods for the analysis of genomic data. . This package contains documentation and examples. Package: python-taurus-doc Description-md5: 63df9b4b695debd45bfe80c7499b4540 Description-en: Framework for scientific/industrial CLIs and GUIs - Documentation Taurus is a Python framework for control and data acquisition CLIs and GUIs in scientific/industrial environments. It supports multiple control systems or data sources: Tango, EPICS, ... New control system libraries can be integrated through plugins. . This package contains the documentation for the taurus Python module. Package: python3-audit Description-md5: fd94855bbf9417e3ba14572436002335 Description-en: Python3 bindings for security auditing The package contains the Python3 bindings for libaudit and libauparse, which are used to monitor systems for security related events. Python can be used to parse and process the security event messages. Package: python3-cluster Description-md5: 0519ad521b7880cca0ae0513f9312627 Description-en: allows grouping a list of arbitrary objects into related groups (clusters) python-cluster is a "simple" package that allows users to create several groups (clusters) of objects from a list. It's meant to be flexible and able to cluster any object. To ensure this kind of flexibility, you need not only to supply the list of objects, but also a function that calculates the similarity between two of those objects. For simple datatypes, like integers, this can be as simple as a subtraction, but more complex calculations are possible. Right now, it is possible to generate the clusters using a hierarchical clustering and the popular K-Means algorithm. For the hierarchical algorithm there are different "linkage" (single, complete, average and uclus) methods available. . This is the Python 3 compatible package. Package: python3-cogent3 Description-md5: e38d55aca43601238c4c188921c44cc8 Description-en: framework for genomic biology PyCogent is a software library for genomic biology. It is a fully integrated and thoroughly tested framework for: * controlling third-party applications, * devising workflows; querying databases, * conducting novel probabilistic analyses of biological sequence evolution, and * generating publication quality graphics. It is distinguished by many unique built-in capabilities (such as true codon alignment) and the frequent addition of entirely new methods for the analysis of genomic data. Package: python3-fastparquet Description-md5: 3651548d1250fb7492d5ab338ef6fdd3 Description-en: python implementation of the parquet format This is a python implementation of the parquet format, aiming integrate into python-based big data work-flows. It is used implicitly by the projects Dask, Pandas and intake-parquet. . This module offers a high degree of support for the features of the parquet format, and very competitive performance, in a small install size and codebase. Package: python3-litestar-htmx Description-md5: 85aadc464bedf17015293d1c6e5095ba Description-en: HTMX Integration for Litestar The Litestar framework supports Plugins, ships with dependency injection, security primitives, OpenAPI schema generation, MessagePack, middlewares, a great CLI experience, and much more. . HTMX is a JavaScript library that gives you access to AJAX, CSS Transitions, WebSockets and Server Sent Events directly in HTML, using attributes, so you can build modern user interfaces with the simplicity and power of hypertext. . This package provides Python bindings for the Litestar package to interact with the HTMX functionalities. Package: python3-pyzstd Description-md5: 87c6b94f3ab30a6212d7910ce432399a Description-en: Facebook's Zstandard (or zstd as short name) algorithm Python bindings to Zstandard (zstd) compression library, the API style is similar to Python's bz2/lzma/zlib modules. . Pyzstd module provides classes and functions for compressing and decompressing data, using Facebook's Zstandard (or zstd as short name) algorithm. Package: python3-taurus Description-md5: 4ab6fc26f2479e037b2502e717c13f63 Description-en: Framework for scientific/industrial CLIs and GUIs - Python3 Taurus is a Python framework for control and data acquisition CLIs and GUIs in scientific/industrial environments. It supports multiple control systems or data sources: Tango, EPICS, ... New control system libraries can be integrated through plugins. . This is the Python 3 version of the package. Package: python3-virtualenvwrapper Description-md5: f1b91c63c7253bb85e30e91b149a3e51 Description-en: extension to virtualenv for managing multiple environments (Py3) virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv tool. The extensions include wrappers for creating and deleting virtual environments and otherwise managing your development workflow, making it easier to work on more than one project at a time without introducing conflicts in their dependencies. . This package installs the library for Python 3. Package: qemu-efi-aarch64-hwe Description-md5: dccdd89b279b31925f0302c441ccd4d2 Description-en: UEFI firmware for 64-bit ARM virtual machines This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . qemu-efi-aarch64 is a build of EDK II for 64-bit ARM virtual machines. It includes full support for UEFI, including Secure Boot. Package: qemu-efi-loongarch64 Description-md5: 875c28378c239de9c3d87f72a88bfdea Description-en: UEFI firmware for LoongArch64 virtual machines qemu-efi-loongarch64 is a build of EDK II for LoongArch64 virtual machines. Package: qemu-efi-loongarch64-hwe Description-md5: c2e4f5f5ecd14fe334ca393e2d544c8e Description-en: UEFI firmware for RISCV64 virtual machines This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . qemu-efi-riscv64 is a build of EDK II for RISCV64 virtual machines. Package: qemu-efi-riscv64-hwe Description-md5: c2e4f5f5ecd14fe334ca393e2d544c8e Description-en: UEFI firmware for RISCV64 virtual machines This package is part of the Ubuntu Virtualization Hardware Enablement variant, which provides the virtualization stack of future Ubuntu releases back to the Ubuntu LTS. The package names are suffixed with -hwe in comparison to the equivalent base packages. However, some documentation and manual pages may still refer to the base package names. In those cases, the base and -hwe package names should be considered interchangeable. The -hwe packages can fulfill dependencies to the base packages, no package is expected to directly depend on a -hwe suffixed package to keep them interchangeable. . qemu-efi-riscv64 is a build of EDK II for RISCV64 virtual machines. Package: qml-module-lomiri-telephony Description-md5: 62faacb030037dbb206fb4b39d1bea9f Description-en: Telephony service components for Lomiri - Telephony QML plugin Telephony service components for Lomiri. . This package contains the QML plugin providing the features from the telephony service to applications. Package: qml-module-lomiri-telephony-phonenumber Description-md5: 537a59c1c2c353ccf5fc83cd029d99a4 Description-en: Telephony service components for Lomiri - PhoneNumber QML plugin Telephony PhoneNumber components for Lomiri. . This package contains the QML plugin providing the features from the telephony PhoneNumber to applications. Package: qml-module-lomiri-thumbnailer Description-md5: 7ee717dbd74c9a75c529f3a1c7ec17a5 Description-en: QML interface for the thumbnailer Lomiri Thumbnailer is an API for the Lomiri operating environment to create and cache image thumbnails for local and remote media. . This package provides image providers that allow access to the thumbnailer from Qt Quick 2 / QML applications. Package: rasdaemon Description-md5: 962545a9e22020ccd686f6c5e425e37f Description-en: utility to receive RAS error tracings rasdaemon is a RAS (Reliability, Availability and Serviceability) logging tool. It currently records memory errors, using the EDAC tracing events. EDAC are drivers in the Linux kernel that handle detection of ECC errors from memory controllers for most chipsets on x86 and ARM architectures. This userspace component consists of an init script which makes sure EDAC drivers and DIMM labels are loaded at system startup, as well as a utility for reporting current error counts from the EDAC sysfs files. Package: redmine Description-md5: 2ec6d8c12b41405de28a9f9eae41fce4 Description-en: flexible project management web application Redmine is a flexible project management web application. Written using Ruby on Rails framework, it is cross-platform and cross-database. . Dependencies for database support are provided by these metapackages: redmine-mysql, redmine-pgsql, redmine-sqlite. . Features * Multiple projects support * Flexible role based access control * Flexible issue tracking system * Gantt chart and calendar * News, documents & files management * Feeds & email notifications * Per project wiki * Per project forums * Time tracking * Custom fields for issues, time-entries, projects and users * SCM integration (SVN, CVS, Git, Mercurial, Bazaar and Darcs) * Issue creation via email * Multiple LDAP authentication support * User self-registration support * Multilanguage support Package: redmine-mysql Description-md5: 5334d370ac0b467914273b70a17e9522 Description-en: metapackage providing MySQL dependencies for Redmine This package only provides MySQL dependencies for Redmine, a flexible project management web application. Install this one if you want to use a MySQL database with Redmine. . Redmine package should be installed along with this package. Package: redmine-pgsql Description-md5: f308cd100ee4983a5adb6ff3370520bf Description-en: metapackage providing PostgreSQL dependencies for Redmine This package provides PostgreSQL dependencies for Redmine, a flexible project management web application. Install this one if you want to use a PostgreSQL database with Redmine. . Redmine package should be installed along with this package. Package: redmine-sqlite Description-md5: 92a51359a57c7c0c86638eb96a7a1e4e Description-en: metapackage providing sqlite dependencies for Redmine This package provides sqlite dependencies for Redmine, a flexible project management web application. Install this one if you want to use a sqlite database with Redmine. . Redmine package should be installed along with this package. Package: rocm-cmake Description-md5: c500c71f8060eaa91af23380c4779039 Description-en: AMD ROCm CMake modules rocm-cmake provides CMake modules for common build and development tasks within the ROCm project, such as setting version numbers, configuring CPack properties, and running static analysis tools. rocm-cmake is not typically required for building libraries or programs that use ROCm. Package: rocm-device-libs-22 Description-md5: 2f13e52fa35b59eeeeb649773f164984 Description-en: AMD specific device-side language runtime libraries Set of AMD specific device-side language runtime libraries, specifically: the Open Compute library controls, the Open Compute Math library, the Open Compute Kernel library, the OpenCL built-in library, the HIP built-in library, and the Heterogeneous Compute built-in library. Package: rocm-podman-support Description-md5: ff83f2a2439c2e250786d3202752f689 Description-en: Utilities for working with ROCm inside podman containers This package contains various utilities that facilitate working with ROCm packages inside podman containers, with a focus on rootless podman containers. . These include: * rocm-podman-setup Prepare the system for GPU-in-container use * rocm-podman-create Build podman images with GPU support * rocm-podman-run Run a command in a container with GPU support . This package also includes autopkgtest-virt-qemu+podman, a specialized autopkgtest backend for running tests in a rootless podman container using the host GPU. . Currently, this only works with amd64 guests on amd64 hosts. Package: rocm-qemu-support Description-md5: b3b12aeb20f3323cdfcbb7d815135f4a Description-en: Utilities for working with ROCm inside QEMU VMs This package contains various utilities that facilitate working with ROCm packages inside QEMU VMs. . These include: * rocm-qemu-setup Prepare the system for GPU pass-through * rocm-qemu-create Build QEMU images with GPU pass-through support * rocm-qemu-run Boot a VM with GPU pass-through . This package also includes autopkgtest-virt-qemu+rocm, a specialized autopkgtest backend for running autopkgtests in a QEMU VM with GPU pass-through. . Currently, this only works with amd64 guests on amd64 hosts. Package: rocm-smi Description-md5: ae5b3b8951a164ed9db167c3132928e1 Description-en: ROCm System Management Interface (ROCm SMI) command-line interface This is the reference implementation from AMD, exposing the ROCm SMI library to the user. It presents a Python executable, `rocm-smi`. Package: sosreport Description-md5: 1ccbc8cf84921866efc192bb260d4ceb Description-en: transitional package for sos This is a transitional package, it can be safely removed. This currently ships the old commands that have been deprecated. Package: tone-generator Description-md5: f9902be78e880aad722beb0e96bf93f1 Description-en: Telephony Tone Generator (daemon) Tone Generator is simple daemon which provides generation of playback tones for DTMF (dialer keypad tones), call progress indication, and other miscellaneous telephony-related tones. . Tone Generator is needed by the telephony stack of Lomiri. . This package provides the core daemon. Package: tone-generator-scripts Description-md5: 7b6ca4e379602861758e632fae2371d0 Description-en: Telephony Tone Generator (test scripts) Tone Generator is simple daemon which provides generation of playback tones for DTMF (dialer keypad tones), call progress indication, and other miscellaneous telephony-related tones. . Tone Generator is needed by the telephony stack of Lomiri. . This package provdes some test scripts. Package: ubuntu-budgie-desktop Description-md5: 3bf8192a6ed7c410dbf56ed37faf2fc4 Description-en: Ubuntu Budgie metapackage Ubuntu Budgie is an Ubuntu flavor that offers a desktop experience using the Budgie-Desktop. This package depends on all of the core Ubuntu Budgie packages. . It is also used to help ensure proper upgrades, so it is recommended that it not be removed. Package: ubuntu-budgie-desktop-minimal Description-md5: d0b3c80f3db609579d0958cea32de7a1 Description-en: Ubuntu Budgie desktop minimal system This package depends on all of the packages in the Ubuntu Budgie desktop minimal system. It is also used to help ensure proper upgrades, so it is recommended that it not be removed. Package: virtualenvwrapper Description-md5: 29de2c2799a02bc581a13fd9176c536e Description-en: extension to virtualenv for managing multiple environments virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv tool. The extensions include wrappers for creating and deleting virtual environments and otherwise managing your development workflow, making it easier to work on more than one project at a time without introducing conflicts in their dependencies. Package: virtualenvwrapper-doc Description-md5: 9dc1ab295026bcbef53283d4c56664be Description-en: extension to virtualenv for managing multiple environments (docs) virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv tool. The extensions include wrappers for creating and deleting virtual environments and otherwise managing your development workflow, making it easier to work on more than one project at a time without introducing conflicts in their dependencies. . This is the common documentation package. Package: xdg-desktop-portal-wlr Description-md5: 141dbaf309d78ef931459d7ea4b29b35 Description-en: xdg-desktop-portal backend for wlroots Support for the screenshot, screencast, and possibly remote-desktop xdg-desktop-portal interfaces for wlroots based compositors. Package: xnest Description-md5: 8fb9e95ed5f9c018992a8cdc83935474 Description-en: Nested X server Xnest is a nested X server that simply relays all its requests to another X server, where it runs as a client. This means that it appears as another window in your current X session. Xnest relies upon its parent X server for font services. . Use of the Xephyr X server instead of Xnest is recommended. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: xorg-server-source Description-md5: 6be9dae6db2bfd4321ce1a5c689cbeb4 Description-en: Xorg X server - source files This package provides original Debian (with Debian patches already applied, and autotools files updated) sources for the X.Org ('Xorg') X server shipped in a tarball. This enables other projects re-using X server codebase (e.g. VNC servers) to (re-)use officially Debian-supported version of the X xserver for their builds. . Unless you are building a software product using X server sources, you probably want xserver-xorg and/or xserver-xorg-core instead. Package: xserver-xephyr Description-md5: eeb7a5ed15c65f716761ab1fa1637b6b Description-en: nested X server Xephyr is an X server that can be run inside another X server, much like Xnest. It is based on the kdrive X server, and as a result it supports newer extensions than Xnest, including render and composite. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: xserver-xorg-legacy Description-md5: a49fa8443df84effdf1fd36e26ad0f94 Description-en: setuid root Xorg server wrapper This package provides a wrapper for the Xorg X server, which is necessary for legacy drivers and non-Linux kernels. Package: xvfb Description-md5: 1cd5b85acd06c23d376b7b5a7f30a0b8 Description-en: Virtual Framebuffer 'fake' X server Xvfb provides an X server that can run on machines with no display hardware and no physical input devices. It emulates a dumb framebuffer using virtual memory. The primary use of this server was intended to be server testing, but other novel uses for it have been found, including testing clients against unusual depths and screen configurations, doing batch processing with Xvfb as a background rendering engine, load testing, as an aid to porting the X server to a new platform, and providing an unobtrusive way to run applications that don't really need an X server but insist on having one anyway. . This package also contains a convenience script called xvfb-run which simplifies the automated execution of X clients in a virtual server environment. This convenience script requires the use of the xauth program. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: clickhouse-client Description-md5: 6dceda8938e33615fa36694310e1e0cc Description-en: column-oriented database system (cli client) ClickHouse is a column-oriented database management system that allows generating analytical data reports in real time. . This package provides ClickHouse CLI client. Package: clickhouse-common Description-md5: dafc4f101c8118146cf2903a05dfe5ed Description-en: column-oriented database system (common files) ClickHouse is a column-oriented database management system that allows generating analytical data reports in real time. . This package provides common files for both ClickHouse server and client. Package: clickhouse-server Description-md5: 40ffe1390c0d529d732668d8ed763668 Description-en: column-oriented database system (server runner) ClickHouse is a column-oriented database management system that allows generating analytical data reports in real time. . This package provides ClickHouse server runner. Package: clickhouse-tools Description-md5: 55d77fef7c5729210736b725d9a3527a Description-en: column-oriented database system (tools) ClickHouse is a column-oriented database management system that allows generating analytical data reports in real time. . This package provides various ClickHouse tools: - clickhouse-performance-test - clickhouse-benchmark - clickhouse-compressor - clickhouse-copier and some others. Package: gcc-mingw-w64-bootstrap Description-md5: 627d18062f3fe28932ae78247ce8f9eb Description-en: GNU Compiler Collection for MinGW-w64 MinGW-w64 provides a development and runtime environment for 32- and 64-bit Windows applications using the GNU Compiler Collection (gcc). . This package contains the GNU Compiler Collection, supporting cross-compiling to 32- and 64-bit MinGW-w64 targets. The bootstrap version of the package contains only the minimal C compiler required to build MinGW-w64. Package: ignition-launch-cli Description-md5: 58a5b2679542ab03c37010d229be92d2 Description-en: Ignition Robotics Launch Library - Launch cli Ignition Launch, a component of Ignition Robotics, provides a command line interface to run and manager application and plugins. . Package contains the ignition launch cli application Package: libignition-gazebo-dev Description-md5: 8ba4d9f9a00527803ae38cb007410427 Description-en: Ignition Gazebo classes and functions for robot apps - Development files Ignition Gazebo is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files Package: libignition-gazebo-plugins Description-md5: ed75f85997875eff7f6d998c9eef28e9 Description-en: Ignition Gazebo classes and functions for robot apps - Plugins Ignition Gazebo is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Plugins collection Package: libignition-gazebo6-6 Description-md5: 5f37a7f9f59985df65ec850277bd2285 Description-en: Ignition Gazebo classes and functions for robot apps - Shared library Ignition Gazebo is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Main shared library Package: libignition-launch-dev Description-md5: 980577ac8b37422a77b797e25a67db00 Description-en: Ignition Robotics Launch Library - Development files Ignition Launch, a component of Ignition Robotics, provides a command line interface to run and manager application and plugins. . Package contains the ignition launch development files Package: libignition-launch5-5 Description-md5: b1c4132c18a7f9ea2480e3a2dcb9fdc6 Description-en: Ignition Robotics Launch Library - Launch libraries Ignition Launch, a component of Ignition Robotics, provides a command line interface to run and manager application and plugins. . Package contains the ignition launch libraries Package: linux-lowlatency-headers-6.8.0-20 Description-md5: dc19fa6de3cae9aa833d00daf7dfb93f Description-en: Header files related to Linux kernel version 6.8.0 This package provides kernel header files for version 6.8.0, for sites that want the latest kernel headers. Please read /usr/share/doc/linux-lowlatency-headers-6.8.0-20/debian.README.gz for details Package: python3-uwsgidecorators Description-md5: b6d60cbaaf5f0468faa6a7e19cf60424 Description-en: module of decorators for elegant access to uWSGI API (Python 3) uwsgidecorators is a simple Python module that exports a bunch of decorators to allow a more elegant approach to uWSGI API. Provided decorators helps with creating of RPC functions, timers, filemonitors. . This package provides uwsgidecorators module for Python 3. Package: rpi-eeprom-sign Description-md5: f6c763358b142a9d7258fa01c2a88ed2 Description-en: Raspberry Pi 4/5 boot EEPROM signer Provides utilities for converting certificates for the Raspberry Pi bootloader and signing boot artifacts Package: ubuntu-budgie-desktop-raspi Description-md5: d480fe11bb746456576d01f66fbb8c82 Description-en: Ubuntu Budgie desktop system for Raspberry Pi Ubuntu Budgie is an Ubuntu flavor that offers a desktop experience using the Budgie-Desktop. This package depends on all of the packages in the Ubuntu Budgie desktop system for Raspberry Pi. . It is also used to help ensure proper upgrades, so it is recommended that it not be removed. Package: gstreamer1.0-adapter-pulseeffects Description-md5: 7600aa151969b8eddcede93a45751854 Description-en: GStreamer adapter plugin Simple plugin that gives output buffers with the desired number of samples. . It is used in PulseEffects to ensure that the number of audio samples in the buffer is a power of 2. The convolver also needs it. . This package is part of the PulseEffects project. Package: gstreamer1.0-autogain-pulseeffects Description-md5: 6e5f3bf4a78ab41e85451ac1fe41f1a2 Description-en: GStreamer autogain plugin Simple GStreamer plugin that changes audio gain to match the levels recommended by the ebur128 standard. . This package is part of the PulseEffects project. Package: gstreamer1.0-convolver-pulseeffects Description-md5: 75bbadcb9fcad09d8632886791202257 Description-en: GStreamer convolver plugin Simple GStreamer crystalizer plugin based on the library of Zita-convolver. . This package is part of the PulseEffects project. Package: gstreamer1.0-crystalizer-pulseeffects Description-md5: ce19a24df2160b0b5ee3bcdb2f7b985e Description-en: GStreamer crystalizer plugin Simple GStreamer plugin, useful to add more dynamic range to songs that were overly compressed. . This package is part of the PulseEffects project. Package: pulseeffects Description-md5: b8d7dfc9b25713d68c3180a148bb5e00 Description-en: Audio effects for PulseAudio applications PulseEffects is an advanced system-wide equalizer that works with PulseAudio. It can apply system-wide effects to all running application or selected apps. . PulseEffects also provides many pre-defined sound effects for PulseAudio input and output. Package: r-cran-tibble Description-md5: f02fb4d466c84c52ac9908542537e13f Description-en: Simple Data Frames Provides a 'tbl_df' class (the 'tibble') with stricter checking and better formatting than the traditional data frame. Package: python3-tasmanian Description-md5: 50c0f78b6ee31e11641e9f2af72c1f91 Description-en: Python interface to the Tasmanian sparse grids and DREAM modules The Toolkit for Adaptive Stochastic Modeling and Non-Intrusive ApproximatioN (Tasmanian) is a collection of robust libraries for high dimensional integration and interpolation as well as parameter calibration. . This package provides a Python interface to the Tasmanian sparse grids and DREAM modules. Package: dnscap Description-md5: 24eb705d172e0388560288b96e8543cb Description-en: Network capture utility designed specifically for DNS traffic dnscap is a network capture utility designed specifically for DNS traffic. It produces binary data in pcap(3) format. This utility is similar to tcpdump(1), but has a number of features tailored to DNS transactions and protocol options. Package: libghc-taffybar-dev Description-md5: e2a9c1cbc2980e420cb32ecf2a7217df Description-en: desktop bar extensible in Haskell This bar is based on gtk2hs and provides several widgets (including a few graphical ones). It also sports an optional snazzy system tray. . This package provides a library for the Haskell programming language. See http://www.haskell.org/ for more information on Haskell. Package: libghc-taffybar-prof Description-md5: 23ce08f0fb6d2950e1e75d2a8079aa51 Description-en: desktop bar extensible in Haskell; profiling libraries This bar is based on gtk2hs and provides several widgets (including a few graphical ones). It also sports an optional snazzy system tray. . This package provides a library for the Haskell programming language, compiled for profiling. See http://www.haskell.org/ for more information on Haskell. Package: librust-tokio-executor-dev Description-md5: 1d0777a6d4941c1d599a024b61bd87bb Description-en: Future execution primitives - Rust source code This package contains the source for the Rust tokio-executor crate, packaged by debcargo for use with cargo and dh-cargo. Package: obs-move-transition Description-md5: ab08fec88e4d58e5e081d5e8fab3f021 Description-en: plugin for OBS Studio to improve switching scenes This plugin moves sources to a new position during a scene transition, adding nice effects. If the 2 scenes contain a source with similar name (configured with settings) it will do the move the position and size between the 2 positions. . This filter can be added to a scene or a source to override the move transition for a source of the scene or the source global. . To use Move Transition, find for "Move" on "Scene Transitions" dock. Package: taffybar Description-md5: fd7ba658adfd5a29ca697ea4f3f4c221 Description-en: desktop bar extensible in Haskell This bar is based on gtk2hs and provides several widgets (including a few graphical ones). It also sports an optional snazzy system tray. . This package comes pre-configured with the default configuration. If you want to build your custom-configured version, make sure that libghc-taffybar-dev is installed and put your configuration in ~/.config/taffybar/taffybar.hs Package: xmobar Description-md5: 32ac199e8dddf9c37d0de0d4037fb8b3 Description-en: lightweight status bar for X11 window managers xmobar is a lightweight text-based status bar for X11 desktops written in Haskell and designed to work with (but not limited to) xmonad. It has a variety of plugins allowing the display of system-related data and an extensible architecture that makes it easy to write one's own plugins. xmobar supports displaying UTF-8 text and using TrueType fonts via Xft. Package: freeorion Description-md5: 23b79bf7ff13104e92bf18433717f5e5 Description-en: turn-based space empire and galactic conquest game FreeOrion is a turn-based space empire and galactic conquest (4X) game being designed and built by the FreeOrion project. FreeOrion is inspired by the tradition of the Master of Orion games, but is not a clone or remake of that series or any other game. . The game is about the construction of a living, breathing universe in a grand campaign model. You can develop your own galactic empire and explore new star systems with your fleets as one of several unique human or alien species. Colonization of new worlds, researching new technology, managing your resources and defending your planets against the AI or other human players on a galactic scale are your main objectives. Package: libignition-gui-dev Description-md5: feda608232ae7542cb618649a19a2bc9 Description-en: Ignition Gui classes and functions for robot apps - Development files Ignition Gui is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Package for development libraries and headers. Package: libignition-gui6-6 Description-md5: a1785db80184ac84ff09bc2ef2702ff3 Description-en: Ignition Gui classes and functions for robot apps - Shared library Ignition Gui is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Package contains the main libraries Package: libignition-sensors-air-pressure-dev Description-md5: 7ef8439d5cf7d15ce02454d28114b52d Description-en: Ignition sensors classes and functions for robot apps - Dev files air-pressure Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for air-pressure sensor Package: libignition-sensors-altimeter-dev Description-md5: e7e4bd4fb10ae6d525fd53df49e3f692 Description-en: Ignition sensors classes and functions for robot apps - Dev files altimeter Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for altimeter sensor Package: libignition-sensors-camera-dev Description-md5: 9a8b2d2bc7256e8d3be9e95a8de9da99 Description-en: Ignition sensors classes and functions for robot apps - Dev files Camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for Camera sensor Package: libignition-sensors-core-dev Description-md5: 045b0fe84d48ce2e398a6cd32cb62aba Description-en: Ignition sensors classes and functions for robot apps - Development files Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Core development files Package: libignition-sensors-depth-camera-dev Description-md5: 0cb6de466a3cb3a15285645737d1a676 Description-en: Ignition sensors classes and functions for robot apps - Dev files depth-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for depth-camera sensor Package: libignition-sensors-dev Description-md5: b51a00c68154af6a66278ed2bef0391a Description-en: Ignition sensors classes and functions for robot apps - Metapackage Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Metapackage for all the -dev files Package: libignition-sensors-force-torque-dev Description-md5: a68ff69ec3a7ac190752e37aead56407 Description-en: Ignition sensors classes and functions for robot apps - Dev files force-torque Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for force-torque sensor Package: libignition-sensors-gpu-lidar-dev Description-md5: 7c0a357103c919f224f14ccd4636a13c Description-en: Ignition sensors classes and functions for robot apps - Dev files gpu-lidar Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for gpu-lidar sensor Package: libignition-sensors-imu-dev Description-md5: 2cb4aabeeda68b9203ced686aed19ec1 Description-en: Ignition sensors classes and functions for robot apps - Dev files imu Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for imu sensor Package: libignition-sensors-lidar-dev Description-md5: a97d47fe92f56af44e92d5c936cfb306 Description-en: Ignition sensors classes and functions for robot apps - Dev files lidar Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for lidar sensor Package: libignition-sensors-logical-camera-dev Description-md5: 520a4c764874076ef2a304550f1789a7 Description-en: Ignition sensors classes and functions for robot apps - Dev files logical-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for logical-camera sensor Package: libignition-sensors-magnetometer-dev Description-md5: 959672d6f8a3b26e7fc4e2d9ef834460 Description-en: Ignition sensors classes and functions for robot apps - Dev files magnetometer Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for magnetometer sensor Package: libignition-sensors-navsat-dev Description-md5: 7f056e5be5b7abc2cdf602b4d4ef786a Description-en: Ignition sensors classes and functions for robot apps - Dev files navsat Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for NavSat (GPS) sensor Package: libignition-sensors-rendering-dev Description-md5: e8d69ff6a6c453c6791ed8ea937efcc4 Description-en: Ignition sensors classes and functions for robot apps - Dev files rendering Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for rendering sensor Package: libignition-sensors-rgbd-camera-dev Description-md5: f35c366810390c55e8eb96ba1b7a3e98 Description-en: Ignition Sensors classes and functions for robot apps - Dev files rgbd-camera Ignition Sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for rgbd-camera sensor Package: libignition-sensors-segmentation-camera-dev Description-md5: c99da2926ec257e587e2da1a5878e1ac Description-en: Ignition sensors classes and functions for robot apps - Dev files segmentation-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for segmentation-camera sensor Package: libignition-sensors-thermal-camera-dev Description-md5: c6b83066508432d2887164583c32b21e Description-en: Ignition sensors classes and functions for robot apps - Dev files thermal-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Development files for thermal-camera sensor Package: libignition-sensors6-6 Description-md5: 11c0438fc30ca20a7a7b6a53c5a094a3 Description-en: Ignition sensors classes and functions for robot apps - Shared library Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. Package: libignition-sensors6-air-pressure6 Description-md5: 6af3c8504ac71fac27ab75b3e27d3b55 Description-en: Ignition sensors classes and functions for robot apps - Lib air-pressure Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for air-pressure sensor Package: libignition-sensors6-altimeter6 Description-md5: b5b40c004495caa2a0617bd41ac8fbc4 Description-en: Ignition sensors classes and functions for robot apps - Lib altimeter Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for altimeter sensor Package: libignition-sensors6-camera6 Description-md5: e0cefdb7a9b8fee736a39c6a3e5d7894 Description-en: Ignition sensors classes and functions for robot apps - Lib Camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for Camera sensor Package: libignition-sensors6-depth-camera6 Description-md5: fd36179ae2b4b263c991c031208c6557 Description-en: Ignition sensors classes and functions for robot apps - Lib depth-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for depth-camera sensor Package: libignition-sensors6-force-torque6 Description-md5: 56926cbbacc74bdb19f6320d9d96e9eb Description-en: Ignition sensors classes and functions for robot apps - Lib force-torque Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for force-torque sensor Package: libignition-sensors6-gpu-lidar6 Description-md5: 94dc7b7ee619cf97c4bbd9b9aa1d48e2 Description-en: Ignition sensors classes and functions for robot apps - Lib gpu-lidar Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for gpu-lidar sensor Package: libignition-sensors6-imu6 Description-md5: c3f7a8b0900b5bb22286690a7dad12a8 Description-en: Ignition sensors classes and functions for robot apps - Lib imu Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for imu sensor Package: libignition-sensors6-lidar6 Description-md5: 09928d3bcb5434c27b4ee3f1b66284b0 Description-en: Ignition sensors classes and functions for robot apps - Lib lidar Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for lidar sensor Package: libignition-sensors6-logical-camera6 Description-md5: d21596526c2a201792542dffbe8fb918 Description-en: Ignition sensors classes and functions for robot apps - Lib logical-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for logical-camera sensor Package: libignition-sensors6-magnetometer6 Description-md5: 9f99ea765378626d5f99f4682048de90 Description-en: Ignition sensors classes and functions for robot apps - Lib magnetometer Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for magnetometer sensor Package: libignition-sensors6-navsat6 Description-md5: 6dbd43dc17d2d05de6788cc0423ed621 Description-en: Ignition sensors classes and functions for robot apps - Lib navsat Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for NavSat (GPS) sensor Package: libignition-sensors6-rendering6 Description-md5: 3bbd2907b87b38d1a3df1c97ab4918c5 Description-en: Ignition sensors classes and functions for robot apps - Lib rendering Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for rendering sensor Package: libignition-sensors6-rgbd-camera6 Description-md5: 501dfc7a56ce94b12ca397b409807442 Description-en: Ignition Sensors classes and functions for robot apps - Lib rgbd-camera Ignition Sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for rgbd-camera sensor Package: libignition-sensors6-segmentation-camera6 Description-md5: c33fab7ca9f229ab00c48de7041b65e7 Description-en: Ignition sensors classes and functions for robot apps - Lib segmentation-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for segmentation-camera sensor Package: libignition-sensors6-thermal-camera6 Description-md5: 3d9f0ce4b4fd826a65199add2c4d5f7e Description-en: Ignition sensors classes and functions for robot apps - Lib thermal-camera Ignition sensors is a component in the ignition framework, a set of libraries designed to rapidly develop robot applications. . Shared library for thermal-camera sensor Package: librust-tokio-reactor-dev Description-md5: 07eabb320ba20cc7e0ec5ba4953b5dff Description-en: Event loop that drives Tokio I/O resources - Rust source code This package contains the source for the Rust tokio-reactor crate, packaged by debcargo for use with cargo and dh-cargo. Package: postgresql-client-17 Description-md5: eaea3378475832005862cf031d1071c0 Description-en: front-end programs for PostgreSQL 17 This package contains client and administrative programs for PostgreSQL: these are the interactive terminal client psql and programs for creating and removing users and databases. . This is the client package for PostgreSQL 17. If you install PostgreSQL 17 on a standalone machine, you need the server package postgresql-17, too. On a network, you can install this package on many client machines, while the server package may be installed on only one machine. . PostgreSQL is an object-relational SQL database management system. Package: postgresql-server-dev-17 Description-md5: 4b83f4bbf28ca29441e563099103b8b8 Description-en: development files for PostgreSQL 17 server-side programming Header files for compiling SSI code to link into PostgreSQL's backend; for example, for C functions to be called from SQL. . This package also contains the Makefiles necessary for building add-on modules of PostgreSQL, which would otherwise have to be built in the PostgreSQL source-code tree. . PostgreSQL is an object-relational SQL database management system. Package: python3-cypari2 Description-md5: 4ce72cd59d1d99bc5bef7cb61b958cd3 Description-en: Python interface to PARI -- Python 3 A Python interface to the number theory library libpari. . This package installs the library for Python 3. Package: wsjtx-improved Description-md5: ed06eee3439ff809d201752fb1e87864 Description-en: Weak-signal amateur radio communications WSJT-X implements amateur radio communication protocols or "modes" called FST4, FST4W, FT4, FT8, JT4, JT9, JT65, Q65, MSK144, and WSPR, as well as one called Echo for detecting and measuring your own radio signals reflected from the Moon. These modes were all designed for making reliable, confirmed QSOs under extreme weak-signal conditions. . JT4, JT9, and JT65 use nearly identical message structure and source encoding (the efficient compression of standard messages used for minimal QSOs). They use timed 60-second T/R sequences synchronized with UTC. JT4 and JT65 were designed for EME ("moonbounce") on the VHF/UHF/microwave bands. JT9 is optimized for the MF, and HF bands. It is about 2 dB more sensitive than JT65 while using less than 10% of the bandwidth. Q65 offers submodes with a wide range of T/R sequence lengths and tone spacings. . FT4 and FT8 are operationally similar but use T/R cycles only 7.5 and 15 s long, respectively. MSK144 is designed for Meteor Scatter on the VHF bands. These modes offer enhanced message formats with support for nonstandard callsigns and some popular contests. . FST4 and FST4W are designed particularly for the LF and MF bands. On these bands their fundamental sensitivities are better than other WSJT-X modes with the same sequence lengths, approaching the theoretical limits for their rates of information throughput. FST4 is optimized for two-way QSOs, while FST4W is for quasi-beacon transmissions of WSPR-style messages. FST4 and FST4W do not require the strict, independent time synchronization and phase locking of modes like EbNaut. . WSPR mode implements a protocol designed for probing potential propagation paths with low-power transmissions. WSPR is fully implemented within WSJT-X, including programmable "band-hopping". . wsjt-x_improved is an enhanced version of the excellent WSJT-X software by Joe Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS and others. . Additional features in the "improved PLUS" version include: * Optional band switching buttons * Optional display of bars for Rx and Tx frequency on the waterfall * Improved behavior of the mouse buttons when clicking on the waterfall display * Advanced highlighting options * QSO wait features: Wait and Reply, Wait and Call, Wait and Pounce * Filters for band activity window * Ignore list * Map grid locators to U.S. States and Canadian Provinces * CQ: First / CQ: Max Dist / CQ: Max dB / CQ: Min dB * Dark style * Audible alerts * Cloudlog support * see homepage for a PDF with all new features Package: s390-tools-chreipl-fcp-mpath Description-md5: b074ae3b95d7f4707c086e1f8d3c5b17 Description-en: chreipl-fcp-mpath utility for Linux on z Systems The package contains chreipl-fcp-mpath toolset from the s390-tools collection of utilities, that uses multipath information to change the configured FCP re-IPL path on detecting issues with the current path. Package: s390-tools-cpuplugd Description-md5: 9ecbba0935f842e86acedec57a87f6f3 Description-en: cpuplugd utility for Linux on z Systems The package contains cpuplugd hotplug daemon from the s390-tools collection of utilities. Package: s390-tools-osasnmpd Description-md5: e19b0c795d99dc43d017fe6145018e15 Description-en: osasnmpd utility for Linux on z Systems The package contains osasnmpd monitoring daemon from the s390-tools collection of utilities. Package: s390-tools-statd Description-md5: cdd35cf438bc9d1a03cdbf8e550ccea9 Description-en: mon_statd monitoring daemons for Linux on z Systems The package contains mon_procd and mon_fsstatd z/VM monitoring daemons for Linux on z Systems from the s390-tools collection of utilities. These tools are also known as mon_statd.