c2esp-27/0000755000175000017500000000000012271222572007323 500000000000000c2esp-27/ppd/0000755000175000017500000000000012271222572010106 500000000000000c2esp-27/ppd/Makefile.in0000644000175000017500000003152312262021560012071 00000000000000# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = ppd DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(ppddir)" DATA = $(ppd_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ HAVE_CUPSCONFIG = @HAVE_CUPSCONFIG@ HAVE_PPDC = @HAVE_PPDC@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ cupsdatadir = @cupsdatadir@ cupsfilterdir = @cupsfilterdir@ cupsversion = @cupsversion@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ ppdlist = @ppdlist@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ppddir = /usr/share/ppd/@PACKAGE@ ppd_DATA = @ppdlist@ all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ppd/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu ppd/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-ppdDATA: $(ppd_DATA) @$(NORMAL_INSTALL) @list='$(ppd_DATA)'; test -n "$(ppddir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(ppddir)'"; \ $(MKDIR_P) "$(DESTDIR)$(ppddir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(ppddir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(ppddir)" || exit $$?; \ done uninstall-ppdDATA: @$(NORMAL_UNINSTALL) @list='$(ppd_DATA)'; test -n "$(ppddir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(ppddir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(ppddir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-ppdDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-ppdDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ctags-am distclean distclean-generic distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ppdDATA install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags-am uninstall uninstall-am \ uninstall-ppdDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: c2esp-27/ppd/Makefile.am0000644000175000017500000000007212260572564012070 00000000000000 ppddir = /usr/share/ppd/@PACKAGE@ ppd_DATA = @ppdlist@ c2esp-27/configure.ac0000644000175000017500000001206212262016531011526 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. # Version that can use drv files instead of ppd files. $cupsversionfordrv=1.6 AC_PREREQ([2.6]) AC_INIT([c2esp], [27], quandry@ntlworld.com) AM_INIT_AUTOMAKE AC_CONFIG_HEADERS([config.h]) #AM_INIT_AUTOMAKE # Checks for programs. AC_PROG_CC AC_CHECK_PROG(HAVE_PPDC, ppdc, 1) AC_CHECK_PROG(HAVE_CUPSCONFIG, cups-config, 1) # Checks for libraries. AC_CHECK_LIB(cups, ppdOpenFile) #-lcupsdriver for cups < ver 1.6 AC_SEARCH_LIBS(cupsDitherNew, cupsdriver cupsfilters) if test "$ac_cv_search_cupsDitherNew" = "-lcupsdriver"; then : HAVE_LIBCUPSDRIVER="1" fi if test "$ac_cv_search_cupsDitherNew" = "-lcupsfilters"; then : HAVE_LIBCUPSFILTERS="1" fi AC_SEARCH_LIBS(cupsRasterOpen, cupsimage cupsfilters cups) if test "$ac_cv_search_cupsRasterOpen" != "no"; then : HAVE_LIBCUPSIMAGE="1" fi AC_SEARCH_LIBS(deflate, z) if test "$ac_cv_search_deflate" != "no"; then : HAVE_LIBZ="1" fi # In order to work with Debian or Fedora AC_SEARCH_LIBS(jbg85_enc_init, jbig85 jbig) JBIG85LIB=$ac_cv_search_jbg85_enc_init # Checks for header files. AC_CHECK_HEADERS([fcntl.h stdlib.h string.h unistd.h cups/raster.h cups/sidechannel.h]) AC_CHECK_HEADERS([cups/image.h cups/driver.h]) AC_CHECK_HEADERS([cupsfilters/image.h cupsfilters/driver.h]) AC_CHECK_HEADERS([zlib.h]) AC_CHECK_HEADERS([jbig85.h jbig.h]) # Checks for typedefs, structures, and compiler characteristics. AC_TYPE_SIZE_T # Checks for library functions. AC_FUNC_ERROR_AT_LINE AC_FUNC_MALLOC AC_CHECK_FUNCS([memset strerror strncasecmp strstr]) # Identify cups version if test "$HAVE_CUPSCONFIG" = "1"; then : cupsversion=$(cups-config --version) AC_MSG_NOTICE([cupsversion is $cupsversion]) AC_SUBST(cupsversion) fi # Set cups filter installation directory if test "$HAVE_CUPSCONFIG" = "1"; then : defaultfilterdir=$(cups-config --serverbin)/filter echo "default filter dir $defaultfilterdir is from cups-config" else defaultfilterdir="/usr/lib/cups/filter" echo "no cups-config, default filter dir will be $defaultfilterdir" fi AC_ARG_WITH(cupsfilterdir, AC_HELP_STRING([--with-cupsfilterdir=DIR], [set cups filter install directory [default is supplied by cups-config]]), cupsfilterdir=$withval, cupsfilterdir=$defaultfilterdir) AC_MSG_NOTICE([cupsfilterdir is $cupsfilterdir]) AC_SUBST(cupsfilterdir) # Set cups data installation directory if test "$HAVE_CUPSCONFIG" = "1"; then : defaultdatadir=$(cups-config --datadir) echo "default data dir $defaultdatadir is from cups-config" else defaultdatadir="/usr/share/cups" echo "no cups-config, default data dir will be $defaultdatadir" fi AC_ARG_WITH(cupsdatadir, AC_HELP_STRING([--with-cupsdatadir=DIR], [set cups data file install directory [default is supplied by cups-config]]), cupsdatadir=$withval, cupsdatadir=$defaultdatadir) AC_MSG_NOTICE([cupsdatadir is $cupsdatadir]) AC_SUBST(cupsdatadir) AC_MSG_NOTICE([HAVE_PPDC = $HAVE_PPDC]) ppdlist="" if test "$HAVE_PPDC" = "1"; then : AC_MSG_NOTICE([making ppd files with ppdc]) for drvfile in src/*.drv ; do ppdc $drvfile; done # check the actual version of cups where drv files can be used instead of ppds if test "$cupsversion" \< "$cupsversionfordrv"; then cd ppd for ppdfile in *.ppd; do \ ppdlist="$ppdlist $ppdfile" done; cd .. echo "ppds to be installed = $ppdlist" else echo "no ppds will be installed" fi else if test "$cupsversion" \< "$cupsversionfordrv"; then AC_MSG_WARN([ppdc was not found. So ppd files were not created. ppd files are only required for old versions of cups that cannot use the drv files.]) else AC_MSG_NOTICE([ppdc was not found but it's not needed for cups $cupsversionfordrv or later.]) fi fi AC_SUBST(ppdlist) AC_MSG_NOTICE([*]) AC_MSG_NOTICE([*** Any missing dependencies are listed below ***]) if test "$HAVE_CUPSCONFIG" != "1"; then : AC_MSG_WARN([cups-config was not found. Try installing a package like libcups2-dev and run configure again.]) fi if test "$cupsversion" \< "1.6"; then AC_MSG_NOTICE([cups version is earlier than 1.6 - OK]) if test "$HAVE_LIBCUPSDRIVER" != "1"; then : AC_MSG_WARN([libcupsdriver was not found. Try installing a package like libcupsdriver1-dev and run configure again.]) fi else AC_MSG_NOTICE([cups version is 1.6 or later - OK]) if test "$HAVE_LIBCUPSFILTERS" != "1"; then : AC_MSG_WARN([HAVE_LIBCUPSFILTERS = $HAVE_LIBCUPSFILTERS libcupsfilters was not found. Try installing a package like libcupsfilters-dev and run configure again.]) fi fi if test "$HAVE_LIBCUPSIMAGE" != "1"; then : AC_MSG_WARN([libcupsimage was not found. Try installing a package like libcupsimage2-dev and run configure again.]) fi #AC_MSG_NOTICE([JBIG85LIB=$JBIG85LIB]) if test "$JBIG85LIB" != "-ljbig" && test "$JBIG85LIB" != "-ljbig85"; then : AC_MSG_WARN([jbig85 library was not found. Try installing a package like jbig-kit libjbig85 or libjbig and run configure again. If your distro is pre 2012 you may need to install jbigkit85]) fi AC_MSG_NOTICE([*]) AC_MSG_NOTICE([LIBS=$LIBS]) AC_OUTPUT(Makefile src/Makefile doc/Makefile scripts/Makefile ppd/Makefile) c2esp-27/config.h.in0000644000175000017500000000566212262021557011277 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_CUPSFILTERS_DRIVER_H /* Define to 1 if you have the header file. */ #undef HAVE_CUPSFILTERS_IMAGE_H /* Define to 1 if you have the header file. */ #undef HAVE_CUPS_DRIVER_H /* Define to 1 if you have the header file. */ #undef HAVE_CUPS_IMAGE_H /* Define to 1 if you have the header file. */ #undef HAVE_CUPS_RASTER_H /* Define to 1 if you have the header file. */ #undef HAVE_CUPS_SIDECHANNEL_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_JBIG85_H /* Define to 1 if you have the header file. */ #undef HAVE_JBIG_H /* Define to 1 if you have the `cups' library (-lcups). */ #undef HAVE_LIBCUPS /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strncasecmp' function. */ #undef HAVE_STRNCASECMP /* Define to 1 if you have the `strstr' function. */ #undef HAVE_STRSTR /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the header file. */ #undef HAVE_ZLIB_H /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to `unsigned int' if does not define. */ #undef size_t c2esp-27/configure0000755000175000017500000055267612262021556011176 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for c2esp 27. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: quandry@ntlworld.com about your system, including any $0: error possibly output before this message. Then install $0: a modern shell, or manually run the script under such a $0: shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='c2esp' PACKAGE_TARNAME='c2esp' PACKAGE_VERSION='27' PACKAGE_STRING='c2esp 27' PACKAGE_BUGREPORT='quandry@ntlworld.com' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS ppdlist cupsdatadir cupsfilterdir cupsversion LIBOBJS EGREP GREP CPP HAVE_CUPSCONFIG HAVE_PPDC am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_dependency_tracking with_cupsfilterdir with_cupsdatadir ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures c2esp 27 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/c2esp] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of c2esp 27:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-cupsfilterdir=DIR set cups filter install directory [default is supplied by cups-config] --with-cupsdatadir=DIR set cups data file install directory [default is supplied by cups-config] Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF c2esp configure 27 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ----------------------------------- ## ## Report this to quandry@ntlworld.com ## ## ----------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_type # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by c2esp $as_me 27, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.13' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='c2esp' VERSION='27' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' ac_config_headers="$ac_config_headers config.h" #AM_INIT_AUTOMAKE # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Extract the first word of "ppdc", so it can be a program name with args. set dummy ppdc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_HAVE_PPDC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$HAVE_PPDC"; then ac_cv_prog_HAVE_PPDC="$HAVE_PPDC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_HAVE_PPDC="1" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi HAVE_PPDC=$ac_cv_prog_HAVE_PPDC if test -n "$HAVE_PPDC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_PPDC" >&5 $as_echo "$HAVE_PPDC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "cups-config", so it can be a program name with args. set dummy cups-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_HAVE_CUPSCONFIG+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$HAVE_CUPSCONFIG"; then ac_cv_prog_HAVE_CUPSCONFIG="$HAVE_CUPSCONFIG" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_HAVE_CUPSCONFIG="1" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi HAVE_CUPSCONFIG=$ac_cv_prog_HAVE_CUPSCONFIG if test -n "$HAVE_CUPSCONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_CUPSCONFIG" >&5 $as_echo "$HAVE_CUPSCONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Checks for libraries. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ppdOpenFile in -lcups" >&5 $as_echo_n "checking for ppdOpenFile in -lcups... " >&6; } if ${ac_cv_lib_cups_ppdOpenFile+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lcups $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ppdOpenFile (); int main () { return ppdOpenFile (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_cups_ppdOpenFile=yes else ac_cv_lib_cups_ppdOpenFile=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_cups_ppdOpenFile" >&5 $as_echo "$ac_cv_lib_cups_ppdOpenFile" >&6; } if test "x$ac_cv_lib_cups_ppdOpenFile" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBCUPS 1 _ACEOF LIBS="-lcups $LIBS" fi #-lcupsdriver for cups < ver 1.6 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing cupsDitherNew" >&5 $as_echo_n "checking for library containing cupsDitherNew... " >&6; } if ${ac_cv_search_cupsDitherNew+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char cupsDitherNew (); int main () { return cupsDitherNew (); ; return 0; } _ACEOF for ac_lib in '' cupsdriver cupsfilters; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_cupsDitherNew=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_cupsDitherNew+:} false; then : break fi done if ${ac_cv_search_cupsDitherNew+:} false; then : else ac_cv_search_cupsDitherNew=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_cupsDitherNew" >&5 $as_echo "$ac_cv_search_cupsDitherNew" >&6; } ac_res=$ac_cv_search_cupsDitherNew if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi if test "$ac_cv_search_cupsDitherNew" = "-lcupsdriver"; then : HAVE_LIBCUPSDRIVER="1" fi if test "$ac_cv_search_cupsDitherNew" = "-lcupsfilters"; then : HAVE_LIBCUPSFILTERS="1" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing cupsRasterOpen" >&5 $as_echo_n "checking for library containing cupsRasterOpen... " >&6; } if ${ac_cv_search_cupsRasterOpen+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char cupsRasterOpen (); int main () { return cupsRasterOpen (); ; return 0; } _ACEOF for ac_lib in '' cupsimage cupsfilters cups; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_cupsRasterOpen=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_cupsRasterOpen+:} false; then : break fi done if ${ac_cv_search_cupsRasterOpen+:} false; then : else ac_cv_search_cupsRasterOpen=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_cupsRasterOpen" >&5 $as_echo "$ac_cv_search_cupsRasterOpen" >&6; } ac_res=$ac_cv_search_cupsRasterOpen if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi if test "$ac_cv_search_cupsRasterOpen" != "no"; then : HAVE_LIBCUPSIMAGE="1" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing deflate" >&5 $as_echo_n "checking for library containing deflate... " >&6; } if ${ac_cv_search_deflate+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char deflate (); int main () { return deflate (); ; return 0; } _ACEOF for ac_lib in '' z; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_deflate=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_deflate+:} false; then : break fi done if ${ac_cv_search_deflate+:} false; then : else ac_cv_search_deflate=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_deflate" >&5 $as_echo "$ac_cv_search_deflate" >&6; } ac_res=$ac_cv_search_deflate if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi if test "$ac_cv_search_deflate" != "no"; then : HAVE_LIBZ="1" fi # In order to work with Debian or Fedora { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing jbg85_enc_init" >&5 $as_echo_n "checking for library containing jbg85_enc_init... " >&6; } if ${ac_cv_search_jbg85_enc_init+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char jbg85_enc_init (); int main () { return jbg85_enc_init (); ; return 0; } _ACEOF for ac_lib in '' jbig85 jbig; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_jbg85_enc_init=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_jbg85_enc_init+:} false; then : break fi done if ${ac_cv_search_jbg85_enc_init+:} false; then : else ac_cv_search_jbg85_enc_init=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_jbg85_enc_init" >&5 $as_echo "$ac_cv_search_jbg85_enc_init" >&6; } ac_res=$ac_cv_search_jbg85_enc_init if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi JBIG85LIB=$ac_cv_search_jbg85_enc_init # Checks for header files. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in fcntl.h stdlib.h string.h unistd.h cups/raster.h cups/sidechannel.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in cups/image.h cups/driver.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in cupsfilters/image.h cupsfilters/driver.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in zlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" if test "x$ac_cv_header_zlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_ZLIB_H 1 _ACEOF fi done for ac_header in jbig85.h jbig.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" if test "x$ac_cv_type_size_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi # Checks for library functions. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for error_at_line" >&5 $as_echo_n "checking for error_at_line... " >&6; } if ${ac_cv_lib_error_at_line+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { error_at_line (0, 0, "", 0, "an error occurred"); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_error_at_line=yes else ac_cv_lib_error_at_line=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_error_at_line" >&5 $as_echo "$ac_cv_lib_error_at_line" >&6; } if test $ac_cv_lib_error_at_line = no; then case " $LIBOBJS " in *" error.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS error.$ac_objext" ;; esac fi for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } if ${ac_cv_func_malloc_0_nonnull+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_malloc_0_nonnull=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_malloc_0_nonnull=yes else ac_cv_func_malloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then : $as_echo "#define HAVE_MALLOC 1" >>confdefs.h else $as_echo "#define HAVE_MALLOC 0" >>confdefs.h case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac $as_echo "#define malloc rpl_malloc" >>confdefs.h fi for ac_func in memset strerror strncasecmp strstr do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Identify cups version if test "$HAVE_CUPSCONFIG" = "1"; then : cupsversion=$(cups-config --version) { $as_echo "$as_me:${as_lineno-$LINENO}: cupsversion is $cupsversion" >&5 $as_echo "$as_me: cupsversion is $cupsversion" >&6;} fi # Set cups filter installation directory if test "$HAVE_CUPSCONFIG" = "1"; then : defaultfilterdir=$(cups-config --serverbin)/filter echo "default filter dir $defaultfilterdir is from cups-config" else defaultfilterdir="/usr/lib/cups/filter" echo "no cups-config, default filter dir will be $defaultfilterdir" fi # Check whether --with-cupsfilterdir was given. if test "${with_cupsfilterdir+set}" = set; then : withval=$with_cupsfilterdir; cupsfilterdir=$withval else cupsfilterdir=$defaultfilterdir fi { $as_echo "$as_me:${as_lineno-$LINENO}: cupsfilterdir is $cupsfilterdir" >&5 $as_echo "$as_me: cupsfilterdir is $cupsfilterdir" >&6;} # Set cups data installation directory if test "$HAVE_CUPSCONFIG" = "1"; then : defaultdatadir=$(cups-config --datadir) echo "default data dir $defaultdatadir is from cups-config" else defaultdatadir="/usr/share/cups" echo "no cups-config, default data dir will be $defaultdatadir" fi # Check whether --with-cupsdatadir was given. if test "${with_cupsdatadir+set}" = set; then : withval=$with_cupsdatadir; cupsdatadir=$withval else cupsdatadir=$defaultdatadir fi { $as_echo "$as_me:${as_lineno-$LINENO}: cupsdatadir is $cupsdatadir" >&5 $as_echo "$as_me: cupsdatadir is $cupsdatadir" >&6;} { $as_echo "$as_me:${as_lineno-$LINENO}: HAVE_PPDC = $HAVE_PPDC" >&5 $as_echo "$as_me: HAVE_PPDC = $HAVE_PPDC" >&6;} ppdlist="" if test "$HAVE_PPDC" = "1"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: making ppd files with ppdc" >&5 $as_echo "$as_me: making ppd files with ppdc" >&6;} for drvfile in src/*.drv ; do ppdc $drvfile; done # check the actual version of cups where drv files can be used instead of ppds if test "$cupsversion" \< "$cupsversionfordrv"; then cd ppd for ppdfile in *.ppd; do \ ppdlist="$ppdlist $ppdfile" done; cd .. echo "ppds to be installed = $ppdlist" else echo "no ppds will be installed" fi else if test "$cupsversion" \< "$cupsversionfordrv"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ppdc was not found. So ppd files were not created. ppd files are only required for old versions of cups that cannot use the drv files." >&5 $as_echo "$as_me: WARNING: ppdc was not found. So ppd files were not created. ppd files are only required for old versions of cups that cannot use the drv files." >&2;} else { $as_echo "$as_me:${as_lineno-$LINENO}: ppdc was not found but it's not needed for cups $cupsversionfordrv or later." >&5 $as_echo "$as_me: ppdc was not found but it's not needed for cups $cupsversionfordrv or later." >&6;} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: *" >&5 $as_echo "$as_me: *" >&6;} { $as_echo "$as_me:${as_lineno-$LINENO}: *** Any missing dependencies are listed below ***" >&5 $as_echo "$as_me: *** Any missing dependencies are listed below ***" >&6;} if test "$HAVE_CUPSCONFIG" != "1"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cups-config was not found. Try installing a package like libcups2-dev and run configure again." >&5 $as_echo "$as_me: WARNING: cups-config was not found. Try installing a package like libcups2-dev and run configure again." >&2;} fi if test "$cupsversion" \< "1.6"; then { $as_echo "$as_me:${as_lineno-$LINENO}: cups version is earlier than 1.6 - OK" >&5 $as_echo "$as_me: cups version is earlier than 1.6 - OK" >&6;} if test "$HAVE_LIBCUPSDRIVER" != "1"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libcupsdriver was not found. Try installing a package like libcupsdriver1-dev and run configure again." >&5 $as_echo "$as_me: WARNING: libcupsdriver was not found. Try installing a package like libcupsdriver1-dev and run configure again." >&2;} fi else { $as_echo "$as_me:${as_lineno-$LINENO}: cups version is 1.6 or later - OK" >&5 $as_echo "$as_me: cups version is 1.6 or later - OK" >&6;} if test "$HAVE_LIBCUPSFILTERS" != "1"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: HAVE_LIBCUPSFILTERS = $HAVE_LIBCUPSFILTERS libcupsfilters was not found. Try installing a package like libcupsfilters-dev and run configure again." >&5 $as_echo "$as_me: WARNING: HAVE_LIBCUPSFILTERS = $HAVE_LIBCUPSFILTERS libcupsfilters was not found. Try installing a package like libcupsfilters-dev and run configure again." >&2;} fi fi if test "$HAVE_LIBCUPSIMAGE" != "1"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libcupsimage was not found. Try installing a package like libcupsimage2-dev and run configure again." >&5 $as_echo "$as_me: WARNING: libcupsimage was not found. Try installing a package like libcupsimage2-dev and run configure again." >&2;} fi #AC_MSG_NOTICE([JBIG85LIB=$JBIG85LIB]) if test "$JBIG85LIB" != "-ljbig" && test "$JBIG85LIB" != "-ljbig85"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: jbig85 library was not found. Try installing a package like jbig-kit libjbig85 or libjbig and run configure again. If your distro is pre 2012 you may need to install jbigkit85" >&5 $as_echo "$as_me: WARNING: jbig85 library was not found. Try installing a package like jbig-kit libjbig85 or libjbig and run configure again. If your distro is pre 2012 you may need to install jbigkit85" >&2;} fi { $as_echo "$as_me:${as_lineno-$LINENO}: *" >&5 $as_echo "$as_me: *" >&6;} { $as_echo "$as_me:${as_lineno-$LINENO}: LIBS=$LIBS" >&5 $as_echo "$as_me: LIBS=$LIBS" >&6;} ac_config_files="$ac_config_files Makefile src/Makefile doc/Makefile scripts/Makefile ppd/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by c2esp $as_me 27, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ c2esp config.status 27 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "scripts/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;; "ppd/Makefile") CONFIG_FILES="$CONFIG_FILES ppd/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi c2esp-27/src/0000755000175000017500000000000012271222572010112 500000000000000c2esp-27/src/c2espcommon.c0000644000175000017500000003403212262021243012415 00000000000000/* * Kodak ESP Cxxx (OPL?) Control Language filters for the Common UNIX * Printing System (CUPS). * common functions for c2esp, c2espC filters * * copyright Paul Newall May 2010 - Jan 2014. VERSION 4 (first used in c2esp26) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include "../config.h" #include #include #include //FlushBackChannel, and the side channel functions and constants #include //files #include //for chmod #include //time functions used for debugging #if HAVE_CUPSFILTERS_DRIVER_H == 1 #include //has the dither functions #else #include //has the dither functions #endif #include "c2espcommon.h" //the common library /* * Constants... */ //unsigned char NL = 10; /* * Globals... */ char CallerName[50]; /* String that identifies the calling program */ int DoBack; /* Enables the back channel comms */ char BackBuf[32000]; //for the back channel replies from the printer int BackBufLen=sizeof(BackBuf)-1; FILE *LogFile = NULL; //file descriptor for log file time_t StartTime; int BlackPercent, ColourPercent; time_t KeepAwake(time_t Start, int Interval, FILE *PrintFile) { // Keeps the printer connection awake by sending DeviceStatus query not sooner than the specified interval in seconds // Usage: Start = KeepAwake(Start, Interval); if(time(NULL) - Start > Interval) { DoLog("Keeping printer awake by DeviceStatus?\n",0,0); GoodExchange(PrintFile, "DeviceStatus?", "0101,DeviceStatus.ImageDevice", DoBack, 1, 1.0); return (time(NULL)); } else return (Start); } void SetupLogging(char *ExtCallerName, int ExtDoBack, char *ExtLogFileName) { strcpy(CallerName,ExtCallerName); DoBack=ExtDoBack; if(strlen(ExtLogFileName)>0) { remove(ExtLogFileName); //to be sure I only see the latest LogFile = fopen(ExtLogFileName, "w"); //open the log file sleep(3); //does this help chmod to work? chmod(ExtLogFileName, S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it setbuf(LogFile, NULL); fprintf(LogFile, "KodakPrintLog %s\n",ExtCallerName); } StartTime = time(NULL); } void CloseLogging() { if(LogFile) { DoLog("Closing log\n",0,0); fclose(LogFile); } } void DoLog(char *PrintFormat, int I1, int I2) { //prints a line with 2 integers to the log file and the cups error log char CupsFormat[200]; strcpy(CupsFormat, "DEBUG: "); strcat(CupsFormat,CallerName); strcat(CupsFormat,":%d : "); strncat(CupsFormat,PrintFormat,150); //crop PrintFormat to avoid FAILING WITH BUFFER OVERFLOW // add \n if not \n at the end of cupsformat if(CupsFormat[strlen(CupsFormat)-1] != NL) strcat(CupsFormat,"\n"); fprintf(stderr, CupsFormat, time(NULL)-StartTime, I1, I2); if (LogFile != NULL) fprintf(LogFile, CupsFormat, time(NULL)-StartTime, I1, I2); } void DoLogString(char *PrintFormat, char *String) { //prints a line with a string to the log file and the cups error log char CupsFormat[200]; strcpy(CupsFormat, "DEBUG: "); strcat(CupsFormat,CallerName); strcat(CupsFormat,":%d : "); strncat(CupsFormat,PrintFormat,150); //crop PrintFormat to avoid FAILING WITH BUFFER OVERFLOW fprintf(stderr, CupsFormat, time(NULL)-StartTime, String); if (LogFile != NULL) fprintf(LogFile, CupsFormat, time(NULL)-StartTime, String); } /* DoOutJob used to enable one call to send to the specified job file and to stdout (if not testing) And log the result */ void DoOutJob(FILE *OutFile, char *PrintFormat, int I1, int I2) { int BytesRead = 0; //int because cupsBackChannel can return -1 char Display[80]; char LogFormat[200]; int i; if (OutFile) fprintf(OutFile, PrintFormat, I1, I2); //to the specified file #if TESTING == 0 strcpy(LogFormat, "-> "); #else strcpy(LogFormat, "-block- "); #endif strcat(LogFormat,PrintFormat); DoLog(LogFormat, I1, I2); //and the log #if TESTING == 0 fprintf(stdout, PrintFormat, I1, I2); //and to the output fflush(stdout); if(DoBack) { BytesRead = cupsBackChannelRead(BackBuf, BackBufLen, 0.5); //read the reply from printer if(BytesRead >= 1) { if(BytesRead\n", IdString); return(1); } else { if(status == CUPS_SC_STATUS_TIMEOUT) DoLogString("\n", IdString); else if(status == CUPS_SC_STATUS_IO_ERROR) DoLogString("\n", IdString); else if(status == CUPS_SC_STATUS_NOT_IMPLEMENTED) DoLogString("\n", IdString); else DoLogString("\n", IdString); return(0); } } else return(0); } /* GoodExchange now matches against substrings in the reply so we can cope with queued messages better. Thanks to Gordon for this improvement to GoodExchange 4/11/11 The UnexpectedLogLimit added 11/11/11 Note that strtok() replaces the delimiters by null bytes, so you can't search the buffer easily afterwards. It returns the nubmer of bytes read if the reply includes the one expected, otherwise -(the number of bytes read) if the reply did not include Expect, or 0 if there was no reply */ int GoodExchange(FILE *PrintFile, char *Command, char *Expect, int DoBack, unsigned int SleepTime, float ReplyTime) { int BytesRead = 0; //int because cupsBackChannel can return -1 char Display[80]; int i; int UnexpectedCount = 0; const int UnexpectedLogLimit = 5; //stops the log file being filled with Status replies due to keep awake. char * Token1; char * TokenList; const char * Delimiters = ";&"; // ; for normal replies & for device.status? requests.... // don't actually need the info but nice to be able to read it all..... int ReturnSign = -1; //assume we won't find the string we want int BlackPercentFound, ColourPercentFound; #if TESTING == 0 DoLogString("-> %s\n", Command); //now also sends to stderr #else DoLogString("-block- %s\n", Command); //now also sends to stderr #endif if(PrintFile) fprintf(PrintFile, "%s", Command); //to the global print file #if TESTING == 0 fprintf(stdout, "%s", Command); //printer command fflush(stdout); //force a packet to the printer so it can reply sleep(SleepTime); //give it a chance to reply before trying to read the reply (may not be needed) if(DoBack) { BytesRead = cupsBackChannelRead(BackBuf, BackBufLen, ReplyTime); //read the reply from printer if(BytesRead < 1) { DoLog("No reply\n",0,0); return 0; } else { BackBuf[BytesRead]=0; //add null terminator NB BytesRead==-1 if nothing read //fprintf(stderr,"thisline->%s\n",BackBuf); // search for any special replies here before strtok changes the buffer BlackPercentFound=MarkerPercent(BackBuf,0); ColourPercentFound=MarkerPercent(BackBuf,1); if(BlackPercentFound >= 0) BlackPercent=BlackPercentFound; if(ColourPercentFound >= 0) ColourPercent=ColourPercentFound; TokenList = BackBuf; Token1 = strtok(TokenList , Delimiters); while (Token1 != NULL) { for(i=0;i<79;++i) Display[i] = Token1 [i]; //copy the first 79 chars to Display if (strncmp(Token1 , Expect, strlen(Expect) -1) == 0) //reduce string length by 1 as ; removed { DoLogString("Expected reply = %s\n", Display); ReturnSign = 1; } else { // limit the number of unexpected replies that are logged if(UnexpectedCount <= UnexpectedLogLimit) DoLogString("Unexpected reply = %s\n", Display); ++UnexpectedCount; //ReturnSign defaults to unexpected unless changed by a single occurance of expected... //so don't alter it here! } Token1 = strtok(NULL , Delimiters); } return (ReturnSign * BytesRead); } } return 0; #endif } int MarkerPercent(char *Buf, int GetColour) /* GetColour = 1 for "Color" or 0 for "Black" */ { /* search for the ink data in the buffer. Returns -1 if not found */ char *MarkerLevelString; if(GetColour) MarkerLevelString = strstr(Buf, "DeviceStatus.Printer.InkLevelPercent.Color="); else MarkerLevelString = strstr(Buf, "DeviceStatus.Printer.InkLevelPercent.Black="); if (MarkerLevelString) { //DoLog("Found marker level",0,0); MarkerLevelString = strstr(MarkerLevelString, "="); if (MarkerLevelString) { if(strncmp(MarkerLevelString + 1,"F",1)==0) { DoLog("Found marker %d level Full = %d",GetColour,100); return (100); } else { DoLog("Found marker %d level %d",GetColour, atoi(MarkerLevelString + 1)); return (atoi(MarkerLevelString + 1)); } } } else { //DoLog("Failed to find marker %d level",GetColour,0); return -1; } return -1; } void MarkerSetup() { fprintf(stderr, "ATTR: marker-colors=black,magenta\n"); //displays ink drops in printer manager fprintf(stderr, "ATTR: marker-names=black,colour\n"); } void SetPaperSize(char Size[], int PaperPoints) { //converts length of page in cups header (in points) into a string that the printer recognises strcpy(Size, "MediaSize=na_letter_8.5x11in;"); //default switch (PaperPoints) { case 421 : // A6 strcpy(Size, "MediaSize=iso_a6_105x148mm;"); break; case 432 : // Photo 4x6" strcpy(Size, "MediaSize=na_index4x6_4x6in;"); break; case 504 : // Photo 5x7" strcpy(Size, "MediaSize=na_5x7_5x7in;"); break; case 540 : // Monarch Envelope break; case 595 : // A5 strcpy(Size, "MediaSize=iso_a5_148x210mm;"); break; case 624 : // DL Envelope strcpy(Size, "MediaSize=iso_dl_110x220mm;"); break; case 649 : // EnvC5 Envelope strcpy(Size, "MediaSize=iso_c5_162x229mm;"); break; case 684 : // Env10 Envelope strcpy(Size, "MediaSize=na_number10_4.125x9.5in;"); break; case 709 : // B5 Envelope strcpy(Size, "MediaSize=iso_b5_176x250mm;"); break; case 720 : // Photo 8x10" strcpy(Size, "MediaSize=na_govtletter_8x10in;"); break; case 756 : // Executive strcpy(Size, "MediaSize=na_executive_7.25x10.5in;"); break; case 792 : // Letter strcpy(Size, "MediaSize=na_letter_8.5x11in;"); break; case 842 : // A4 strcpy(Size, "MediaSize=iso_a4_210x297mm;"); break; case 1008 : // Legal strcpy(Size, "MediaSize=na_legal_8.5x14in;"); break; case 1191 : // A3 break; case 1224 : // Tabloid break; } } void DisplayHeader(cups_page_header2_t *header) { /* * Show page device dictionary... */ DoLog("StartPage...\n",0,0); DoLogString("MediaClass = \"%s\"\n", header->MediaClass); DoLogString("MediaColor = \"%s\"\n", header->MediaColor); DoLogString("MediaType = \"%s\"\n", header->MediaType); DoLogString("OutputType = \"%s\"\n", header->OutputType); DoLog("AdvanceDistance = %d\n", header->AdvanceDistance,0); DoLog("AdvanceMedia = %d\n", header->AdvanceMedia,0); DoLog("Collate = %d\n", header->Collate,0); DoLog("CutMedia = %d\n", header->CutMedia,0); DoLog("Duplex = %d\n", header->Duplex,0); DoLog("HWResolution = [ %d %d ]\n", header->HWResolution[0], header->HWResolution[1]); DoLog("ImagingBoundingBox = [ %d %d", header->ImagingBoundingBox[0], header->ImagingBoundingBox[1]); DoLog(" %d %d ]\n", header->ImagingBoundingBox[2], header->ImagingBoundingBox[3]); DoLog("InsertSheet = %d\n", header->InsertSheet,0); DoLog("Jog = %d\n", header->Jog,0); DoLog("LeadingEdge = %d\n", header->LeadingEdge,0); DoLog("Margins = [ %d %d ]\n", header->Margins[0], header->Margins[1]); DoLog("ManualFeed = %d\n", header->ManualFeed,0); DoLog("MediaPosition = %d\n", header->MediaPosition,0); DoLog("MediaWeight = %d\n", header->MediaWeight,0); DoLog("MirrorPrint = %d\n", header->MirrorPrint,0); DoLog("NegativePrint = %d\n", header->NegativePrint,0); DoLog("NumCopies = %d\n", header->NumCopies,0); DoLog("Orientation = %d\n", header->Orientation,0); DoLog("OutputFaceUp = %d\n", header->OutputFaceUp,0); DoLog("PageSize = [ %d %d ]\n", header->PageSize[0], header->PageSize[1]); DoLog("Separations = %d\n", header->Separations,0); DoLog("TraySwitch = %d\n", header->TraySwitch,0); DoLog("Tumble = %d\n", header->Tumble,0); DoLog("cupsWidth = %d\n", header->cupsWidth,0); DoLog("cupsHeight = %d\n", header->cupsHeight,0); DoLog("cupsMediaType = %d\n", header->cupsMediaType,0); DoLog("cupsBitsPerColor = %d\n", header->cupsBitsPerColor,0); DoLog("cupsBitsPerPixel = %d\n", header->cupsBitsPerPixel,0); DoLog("cupsBytesPerLine = %d\n", header->cupsBytesPerLine,0); DoLog("cupsColorOrder = %d\n", header->cupsColorOrder,0); DoLog("cupsColorSpace = %d\n", header->cupsColorSpace,0); DoLog("cupsCompression = %d\n", header->cupsCompression,0); } int HeaderInvalid(cups_page_header2_t *header) { /* checks the header has sensible values and returns 1 if they are not sensible */ if(header->HWResolution[0] != 300 && header->HWResolution[0] != 600) { DoLog("Header error: x resolution %d\n",header->HWResolution[0],0); return 1; } return 0; } c2esp-27/src/c2esp.c0000644000175000017500000014071012266571600011220 00000000000000/* * Now using RGB for 300 and 600 dpi * Kodak ESP 5xxx (OPL?) Control Language filter for the Common UNIX * Printing System (CUPS) * * copyright Paul Newall May 2010 - Jan 2014. VERSION 2.7 (c2esp27) * patch by user awl29 applied to fix problems with non bi-directional printers, smb shared * data chunk size limit applied * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Params: job-id user title copies options [file] * options = "noback" disables all calls to the back channel for testing. * This filter is based on: the structure of the rastertohp filter supplied with cups the JBIG library by Markus Kuhn The ESP printers can print in black and white mode or in colour. With resolutions 300 or 600 dpi. If you want to compile with the DEBUGFILES or TESTING options, they should be set in c2espcommon.h */ #define MAXJBIGDATACHUNK 65511 /* some printers can't handle more than 65K at a time */ #include "../config.h" #include #include //FlushBackChannel, and the side channel functions and constants #include //files #include #include #include #include //the reduced jbig library #include //time functions used for debugging #if HAVE_CUPSFILTERS_DRIVER_H == 1 #include //has the dither functions #else #include //has the dither functions #endif #include "c2espcommon.h" //the common library /* * Constants... */ char *Version = "c2esp27"; int StripeHeightMax = 1280; //the max height of a stripe. (Windows 300x1200 files have 1920) const float default_lut2[2] = {0.0, 1.0}; // for colour 1 bit const float default_lut3[3] = {0.0, 0.5, 1.0}; // for colour 2 bit or for black and grey will be separated to 2 x 1 bit const float default_lut5[5] = {0.0, 0.25, 0.5, 0.75, 1.0}; //for black and grey will be separated to 2 x 2 bit int DoTrans = 1; //enables the cmyk transform int MonitorColour = 0; //select colour for debug files CMYK 0123 char *RawColourFileName = "/tmp/ColourRaw.pbm"; char *DitheredColourFileName = "/tmp/ColourDithered.pbm"; char *RasForCompFileName = "/tmp/RasForComp.pbm"; char *CyanRasFileName = "/tmp/RasCyan.pbm"; char *MagentaRasFileName = "/tmp/RasMagenta.pbm"; char *YellowRasFileName = "/tmp/RasYellow.pbm"; char *BlackRasFileName = "/tmp/RasBlack.pbm"; char *GreyRasFileName = "/tmp/RasGrey.pbm"; char *CupsRasterFileName = "/tmp/CupsRaster.pbm"; char *PrintFileName = "/tmp/KodakPrintFile"; char *LogFileName = "/tmp/KodakPrintLog"; char *JobFileName = "/tmp/c2espjob"; /* * Globals... */ unsigned char *RasSpace; /* Output buffer with space before start for previous lines */ unsigned char *RasForComp; /* Output buffer */ unsigned char *CupsLineBuffer; //buffer for one line of the cups raster, RGB or K, bytes short *TransformedBuffer; //cups line buffer transformed, CMYK short *DitherInputBuffer; //buffer for input to the dither, one colour, short ints unsigned char *DitherOutputBuffer; //buffer for output of the dither, one colour, bytes unsigned char *CompStripeBuffer; //buffer for one compressed stripe char KodakPaperSize[50]; /* String that the printer expects for paper size */ int CompStripeBufferFree, //free pointer for buffer OutBitsPerPixel, /* Number of bits per color per pixel for printer*/ RasForCompWidth, //width of raster that is compessed and sent to printer Duplex, /* Current duplex mode */ Page, /* Current page number */ Canceled, /* Has the current job been canceled? */ DoBack; /* Enables the back channel comms */ int BytesPerColour; int SkipStripe; //=1 for each blank stripe that will be skipped int kbUsed = 0; //tracks memory use long BytesOutCountSingle;//tracks total no of compressed bytes output by jbig library for single stripe system time_t TimeStart; //to record the start of a section FILE *PrintFile = NULL; //file descriptor for debug file FILE *JobFile; int CupsLineBufMax = 0; int TransformedBufMax = 0; unsigned char MinOut, MaxOut; //to check the range of the dithered output short MinIn=5000, MaxIn=0; //to check the range of the dithered input time_t StartTime; time_t KeepAwakeStart; int StripeAccum; //to calc average pixel in stripe #if DEBUGFILES == 1 FILE *dfp = NULL; //file descriptor for composite raster file FILE *Cyanfp = NULL; //file descriptor for cyan only raster file FILE *Magentafp = NULL; //file descriptor for magenta only raster file FILE *Yellowfp = NULL; //file descriptor for yellow only raster file FILE *Blackfp = NULL; //file descriptor for black only raster file FILE *Greyfp = NULL; //file descriptor for grey only raster file FILE *RawColourFile = NULL; //file descriptor for input to dither FILE *DitheredColourFile = NULL; //file descriptor for output from dither FILE *CupsRasterFile = NULL; //file descriptor for the cups raster #endif struct jbg85_enc_state JbigState; /* DoOutJob used to enable one call to send to the specified job file and to stdout (if not testing)*/ void DoOutJobNoBack(FILE *OutFile, char *PrintFormat, int I1, int I2) { if (OutFile) fprintf(OutFile, PrintFormat, I1, I2); //to the specified file #if TESTING == 0 fprintf(stdout, PrintFormat, I1, I2); //and to the output #endif KeepAwakeStart = time(NULL); // reset timer } void SetupPrinter(cups_page_header2_t *header) { //gets the printer ready to start the job int i; int StatusLength; for(i=0; i<4; ++i) { if(GoodExchange(JobFile, "LockPrinterWait?", "0002, OK, Locked for printing;", DoBack, 1, 3.0) >= 0) break; } DoOutJob(JobFile, "Event=StartOfJob;",0,0); //printer command if (DoBack) { StatusLength=abs(GoodExchange(PrintFile, "DeviceStatus?", "0101,DeviceStatus.ImageDevice", DoBack, 1, 1.0)); DoLog("StatusLength=%d\n",StatusLength,0); /* you can get unexpected reply if there is an ink low warning then GoodExchange will be -ve */ //aquire ink levels here? DeviceStatus.Printer.InkLevelPercent.Colour=nn%&DeviceStatus.Printer.InkLevelPercent.Black=nn% //note & used as separator if(StatusLength>0) { DoLog("ColourPercent=%d\n",ColourPercent,0); DoLog("BlackPercent=%d\n",BlackPercent,0); fprintf(stderr,"ATTR: marker-levels=%d,%d\n",BlackPercent,ColourPercent); // sets the levels displayed in printer manager } GoodExchange(PrintFile, "DeviceSettings.System?", "0101,DeviceSettings.System", DoBack, 1, 1.0); GoodExchange(PrintFile, "DeviceSettings?", "0101,DeviceSettings.AddressBook", DoBack, 1, 1.0); } DoOutJob(JobFile, KodakPaperSize,0,0); if(header->MediaPosition == 0) DoOutJob(JobFile, "MediaInputTrayCheck=Main;",0,0); else if(header->MediaPosition == 1) DoOutJob(JobFile, "MediaInputTrayCheck=Photo;",0,0); else { DoOutJob(JobFile, "MediaInputTrayCheck=Main;",0,0); DoLog("Unknown Input Tray no. %d so used main tray", header->MediaPosition, 0); } if (DoBack) { GoodExchange(PrintFile, "MediaTypeStatus?", "MediaTypeStatus=custom-media-type-deviceunavailable", DoBack, 1, 1.0); GoodExchange(PrintFile, "MediaDetect?", "0098, OK, Media Detect Started;", DoBack, 1, 1.0); //do MediaTypeStatus? until some media is found #if TESTING == 0 sleep(5); //typical media detect is 7 seconds for(i=0; i<15; ++i) //normal #endif #if TESTING == 1 for(i=0; i<2; ++i) //short for tests #endif { DoLog("MediaTypeStatus? try %d\n", i, 0); if(GoodExchange(PrintFile, "MediaTypeStatus?", "MediaTypeStatus=custom-media-type-deviceunavailable", DoBack, 2, 2.0) <= 0) break; } } } void ShutdownPrinter(void) { int i, ret; DoOutJob(JobFile, "Event=EndOfJob;",0,0); for(i=0; i<20; ++i) /* fast PC might need lots of tries here for printer to finish, how many is reasonable? */ { /* First few tries will be quick so small jobs finish quickly */ if(i<5) ret=GoodExchange(JobFile, "UnlockPrinter?", "0003, OK, Printer unlocked;", DoBack, 1, 5.0); /* Then tries will be slower so long jobs can finish */ else ret=GoodExchange(JobFile, "UnlockPrinter?", "0003, OK, Printer unlocked;", DoBack, 5, 2.0); DoLog("UnlockPrinter? try %d returned %d\n", i, ret); if(ret >= 0 || strcmp(BackBuf , "3405, Error, Printer not locked") == 0) break; //error string has no terminating ; because it has been tokenised by GoodExchange } } void SetupJob(cups_page_header2_t *header) //Prepare the printer for printing. { DoLog("Called SetupJob(*header);\n",0,0); DoOutJob(JobFile, "OutputBin=MainSink;",0,0); Duplex = header->Duplex; if(Duplex == 0) DoOutJob(JobFile, "Sides=OneSided;",0,0); else DoOutJob(JobFile, "Sides=TwoSided;",0,0); DoOutJob(JobFile, "MediaType=custom-media-type-autoselection-0-0-0-0;",0,0); } unsigned char *AllocateCharBuf(size_t Length, char *Name) { unsigned char *Buf; if ((Buf = malloc(Length)) == NULL) { DoLog("ERROR: Unable to allocate %d bytes\n", Length, 0); DoLogString("ERROR: allocating array %s\n", Name); exit(1); } else { DoLogString("INFO: allocated array %s\n", Name); DoLog("AllocateCharBuf:Address %d",(long) Buf,0); kbUsed += Length * 1E-3; return (Buf); } } short *AllocateShortBuf(size_t Length, char *Name) { short *Buf; if ((Buf = malloc(Length * sizeof(short))) == NULL) { DoLog("ERROR: Unable to allocate %d bytes\n", Length * sizeof(short), 0); DoLogString("ERROR: allocating array %s\n", Name); exit(1); } else { DoLogString("INFO: allocated array %s\n", Name); DoLog("Address %d",(long) Buf,0); kbUsed += Length * 1E-3; return (Buf); } } void AllocateBuffers(cups_page_header2_t *header) { int i, RasForCompSize; // Allocate memory for a stripe of graphics... RasForCompSize = RasForCompWidth * StripeHeightMax; RasSpace = AllocateCharBuf(RasForCompSize+RasForCompWidth*2*sizeof(unsigned char), "RasSpace"); RasForComp = RasSpace + (RasForCompWidth*2); //points to the 3rd line, so 2 lines below RasForComp[0] can be used // Clear the page, so the watermark (or grey ink) is blank //probably not required now for(i=0;icupsBytesPerLine, "CupsLineBuffer"); DitherInputBuffer = AllocateShortBuf(header->cupsWidth, "DitherInputBuffer"); TransformedBuffer = AllocateShortBuf(4 * header->cupsWidth, "TransformedBuffer"); DitherOutputBuffer = AllocateCharBuf(header->cupsWidth, "DitherOutputBuffer"); CompStripeBuffer = AllocateCharBuf(RasForCompWidth * StripeHeightMax, "CompStripeBuffer"); DoLog("Buffers allocated %d kb\n",kbUsed,0); } void StartPrinterPage(cups_page_header2_t *header) { int ResX, ResY; //fprintf(stderr, "DEBUG: c2esp: StartPage\n"); DisplayHeader(header); ResX = header->HWResolution[0]; ResY = header->HWResolution[1]; DoOutJob(JobFile, KodakPaperSize,0,0); DoOutJob(JobFile, "Event=StartOfPage;",0,0); DoOutJob(JobFile, "Origin.Top=1.0mm;Origin.Left=1.0mm;",0,0); if(ResX==300) { DoOutJob(JobFile, "PrintQuality=0;",0,0); if (OutBitsPerPixel==2) DoOutJob(JobFile, "PrintSpeed=3;",0,0); else DoOutJob(JobFile, "PrintSpeed=1;",0,0); } else if(ResX==600) { DoOutJob(JobFile, "PrintQuality=4096;",0,0); if (OutBitsPerPixel==2) DoOutJob(JobFile, "PrintSpeed=3;",0,0); //check print speeds else DoOutJob(JobFile, "PrintSpeed=1;",0,0); } else if(ResX==1200) { DoOutJob(JobFile, "PrintQuality=8192;",0,0); if (OutBitsPerPixel==2) DoOutJob(JobFile, "PrintSpeed=3;",0,0); //check print speeds else DoOutJob(JobFile, "PrintSpeed=4;",0,0); } DoOutJob(JobFile, "Resolution=%dx%d;", ResX, ResY); DoOutJob(JobFile, "RasterObject.BitsPerPixel=%d;",OutBitsPerPixel,0); if (header->cupsColorSpace == CUPS_CSPACE_RGB) { DoOutJob(JobFile, "RasterObject.Planes=00FFFF,1P0000&FF00FF,1P0000&FFFF00,2P0000&000000,2T0000&000000,1P0000;",0,0); //for colour DoLog("CUPS_CSPACE_RGB (%d)\n",header->cupsColorSpace,0); } else if (header->cupsColorSpace == CUPS_CSPACE_K) { DoOutJob(JobFile, "RasterObject.Planes=000000,2T0000&000000,1P0000;",0,0); //for mono DoLog("CUPS_CSPACE_K (%d)\n",header->cupsColorSpace,0); } else { //add error message here DoOutJob(JobFile, "RasterObject.Planes=000000,2T0000&000000,1P0000;",0,0); //for mono DoLog("CUPS_CSPACE_?? (%d)\n",header->cupsColorSpace,0); } DoOutJob(JobFile, "RasterObject.Compression=JBIG;",0,0); DoOutJob(JobFile, "RasterObject.Width=%d;", header->cupsWidth,0); DoOutJob(JobFile, "RasterObject.Height=%d;", header->cupsHeight,0); } void EndPage(void) //Finish a page of graphics. { DoOutJob(JobFile, "Event=EndOfPage;", 0,0); /* Free memory... allocated by AllocateBuffers() */ // RasForComp not freed because it is inside RasSpace free(RasSpace); free(CupsLineBuffer); free(DitherInputBuffer); free(DitherOutputBuffer); free(CompStripeBuffer); kbUsed = 0; DoLog("Buffers freed\n",0,0); } void CancelJob(int sig) /* - Cancel the current job... I - Signal */ { (void)sig; DoLog("CancelJob: job cancelled by signal\n",0,0); Canceled = 1; } /* //look up table to map bit pair 11 to 10, 10 to 01, 01 to 01, 00 to 00 //translates 2 bit per pixel colours to printer data unsigned char Map11To10And10To01[256] = { 0, 1, 1, 2, 4, 5, 5, 6, 4, 5, 5, 6, 8, 9, 9, 10, 16, 17, 17, 18, 20, 21, 21, 22, 20, 21, 21, 22, 24, 25, 25, 26, 16, 17, 17, 18, 20, 21, 21, 22, 20, 21, 21, 22, 24, 25, 25, 26, 32, 33, 33, 34, 36, 37, 37, 38, 36, 37, 37, 38, 40, 41, 41, 42, 64, 65, 65, 66, 68, 69, 69, 70, 68, 69, 69, 70, 72, 73, 73, 74, 80, 81, 81, 82, 84, 85, 85, 86, 84, 85, 85, 86, 88, 89, 89, 90, 80, 81, 81, 82, 84, 85, 85, 86, 84, 85, 85, 86, 88, 89, 89, 90, 96, 97, 97, 98, 100, 101, 101, 102, 100, 101, 101, 102, 104, 105, 105, 106, 64, 65, 65, 66, 68, 69, 69, 70, 68, 69, 69, 70, 72, 73, 73, 74, 80, 81, 81, 82, 84, 85, 85, 86, 84, 85, 85, 86, 88, 89, 89, 90, 80, 81, 81, 82, 84, 85, 85, 86, 84, 85, 85, 86, 88, 89, 89, 90, 96, 97, 97, 98, 100, 101, 101, 102, 100, 101, 101, 102, 104, 105, 105, 106, 128, 129, 129, 130, 132, 133, 133, 134, 132, 133, 133, 134, 136, 137, 137, 138, 144, 145, 145, 146, 148, 149, 149, 150, 148, 149, 149, 150, 152, 153, 153, 154, 144, 145, 145, 146, 148, 149, 149, 150, 148, 149, 149, 150, 152, 153, 153, 154, 160, 161, 161, 162, 164, 165, 165, 166, 164, 165, 165, 166, 168, 169, 169, 170, }; void MapDotsInByte(unsigned char *Byte) { *Byte = Map11To10And10To01[*Byte]; } */ void output_jbig(unsigned char *start, size_t len, void *cbarg) /* start is a pointer to some JBIG data len is the number of bytes of JBIG data cbarg is a pointer to an optional output file (output is also sent to stdout) uses a fixed global buffer to store one stripe and sends stripe when it becomes complete Includes mod by Andreas (awl29) to limit the size of JBIG data chunks which is required for some older models */ { int i; int rc; int BytesToPrint; int CurrentChunkSize; unsigned char *CurrentChunkStart; //copy bytes one at a time looking for end of BIE and counting for(i=0;i= 2 && BytesOutCountSingle > 20) //only if the header is complete { if(CompStripeBuffer[CompStripeBufferFree-2] == ESC && CompStripeBuffer[CompStripeBufferFree-1] != 0) { //end of BIE detected DoLog("SingleStripe: detected end of BIE at %d bytes, length %d\n",BytesOutCountSingle,CompStripeBufferFree); //send the buffer to the printer, in chunks less than MAXJBIGDATACHUNK BytesToPrint = CompStripeBufferFree; CurrentChunkSize = 0; CurrentChunkStart = CompStripeBuffer; while (BytesToPrint > 0) { if (BytesToPrint <= MAXJBIGDATACHUNK) CurrentChunkSize = BytesToPrint; else CurrentChunkSize = MAXJBIGDATACHUNK; //send one chunk of data DoOutJob(cbarg, "RasterObject.Data#%d=", CurrentChunkSize,0); if(cbarg != NULL) rc = fwrite(CurrentChunkStart, 1, CurrentChunkSize, cbarg); DoLog("JBIG data chunk is sent to printer\n",0,0); rc = fwrite(CurrentChunkStart, 1, CurrentChunkSize, stdout); //also to output DoOutJob(cbarg, ";",0,0); //one semi colon after the chunk BytesToPrint -= CurrentChunkSize; CurrentChunkStart += CurrentChunkSize; } //then restart the buffer CompStripeBufferFree = 0; } } } } void OutputLineExtents(unsigned char *buf, int Totalbpl, cups_page_header2_t header, FILE *fp) { int BandLeft, BandRight, BytesLeft, BytesRight, ThisBytePrint, BytesPerCol, Col, Cols, Printbpl; //BitsPerPixel is in the buffer of printer data, not in the cups raster Use global OutBitsPerPixel Printbpl = (header.cupsWidth + 7) / 8; if (header.cupsColorSpace == CUPS_CSPACE_CMYK) Cols=4; else if (header.cupsColorSpace == CUPS_CSPACE_RGB) Cols=4; else Cols=1; BytesPerCol=Totalbpl/(Cols+1); //Search for extents in this row of pixels for(BytesLeft=0;BytesLeft= Printbpl) BandLeft=0; else BandLeft=BytesLeft*8/OutBitsPerPixel; //BytesLeft is the offset to the first byte with pixels //BandLeft is the pixel offset to the first byte that is not blank for(BytesRight=Printbpl*OutBitsPerPixel-1;BytesRight >= 0;--BytesRight) { ThisBytePrint=0; for(Col=0;Col\n",Stripe, 0); } else { //there is print in this band DoOutJob(fp,"RasterObject.BandHeight=%d;",StripeHeight,0); DoOutJob(fp,"RasterObject.Extent=true",0,0); DoLog("sending the extent data\n",0,0); for(y=0;y= 8 chars longer than x unsigned char Build=0; /* if (Buffer[x+0]==Level) Build+=0b10000000; if (Buffer[x+1]==Level) Build+=0b01000000; if (Buffer[x+2]==Level) Build+=0b00100000; if (Buffer[x+3]==Level) Build+=0b00010000; if (Buffer[x+4]==Level) Build+=0b00001000; if (Buffer[x+5]==Level) Build+=0b00000100; if (Buffer[x+6]==Level) Build+=0b00000010; if (Buffer[x+7]==Level) Build+=0b00000001; */ if (Buffer[x+0]==Level) Build+=128; //set bit 7 if (Buffer[x+1]==Level) Build+=64; //set bit 6 if (Buffer[x+2]==Level) Build+=32; if (Buffer[x+3]==Level) Build+=16; if (Buffer[x+4]==Level) Build+=8; if (Buffer[x+5]==Level) Build+=4; if (Buffer[x+6]==Level) Build+=2; if (Buffer[x+7]==Level) Build+=1; //set bit 0 return Build; } unsigned char Dithered4ToPrint(unsigned char *Buffer, int x) { //gets 4 points from Buffer started with x and maps them into one byte for one ink or light ink //Buffer must be >= 4 chars longer than x // (0->00, 1->01, 2->10,3->00, 4->00) unsigned char Build=0; /* if (Buffer[x+0]==1) Build+=0b01000000; if (Buffer[x+0]==2) Build+=0b10000000; if (Buffer[x+1]==1) Build+=0b00010000; if (Buffer[x+1]==2) Build+=0b00100000; if (Buffer[x+2]==1) Build+=0b00000100; if (Buffer[x+2]==2) Build+=0b00001000; if (Buffer[x+3]==1) Build+=0b00000001; if (Buffer[x+3]==2) Build+=0b00000010; */ if (Buffer[x+0]==2) Build+=128; //set bit 7 if (Buffer[x+0]==1) Build+=64; if (Buffer[x+1]==2) Build+=32; if (Buffer[x+1]==1) Build+=16; if (Buffer[x+2]==2) Build+=8; if (Buffer[x+2]==1) Build+=4; if (Buffer[x+3]==2) Build+=2; if (Buffer[x+3]==1) Build+=1; //set bit 0 return Build; } unsigned char Dithered4ToPrintDark(unsigned char *Buffer, int x) { //gets 4 points from Buffer started with x and maps them into one byte for dark ink //Buffer must be >= 4 chars longer than x // (0->00, 1->00, 2->00, 3->01, 4->10) unsigned char Build=0; /* if (Buffer[x+0]==3) Build+=0b01000000; if (Buffer[x+0]==4) Build+=0b10000000; if (Buffer[x+1]==3) Build+=0b00010000; if (Buffer[x+1]==4) Build+=0b00100000; if (Buffer[x+2]==3) Build+=0b00000100; if (Buffer[x+2]==4) Build+=0b00001000; if (Buffer[x+3]==3) Build+=0b00000001; if (Buffer[x+3]==4) Build+=0b00000010; */ if (Buffer[x+0]==4) Build+=128; //set bit 7 if (Buffer[x+0]==3) Build+=64; if (Buffer[x+1]==4) Build+=32; if (Buffer[x+1]==3) Build+=16; if (Buffer[x+2]==4) Build+=8; if (Buffer[x+2]==3) Build+=4; if (Buffer[x+3]==4) Build+=2; if (Buffer[x+3]==3) Build+=1; //set bit 0 return Build; } void DummyTransform(unsigned char *InBuffer, short *OutBuffer, int Pixels) { //substitute for the cups transform for testing int x; for(x=0;xcupsColorSpace == CUPS_CSPACE_RGB) { if(y==0) DoLog("Inserting RGB gradient at top of page\n",0,0); for(x=0;xcupsWidth*3;x+=3) { Buffer[x]=255*x/(header->cupsWidth*3); Buffer[x+1]=Buffer[x]; Buffer[x+2]=Buffer[x]; } } else if (header->cupsColorSpace == CUPS_CSPACE_K) { if(y==0) DoLog("Inserting K gradient at top of page\n",0,0); for(x=0;xcupsWidth;++x) Buffer[x]=255*x/(header->cupsWidth); } } FILE *OpenPbm(char *Name, int Width, int Height, int FullScale) { // Opens a pbm graphic file for writing. "P5" or "P4" // If FullScale = 0, a P4 file (line art, 1 bit per pixel) // If FullScale > 0, a P5 file (gray scale, 1 byte per pixel) FILE *Handle; remove(Name); Handle = fopen(Name, "w"); if (Handle) { if(FullScale == 0) fprintf(Handle, "P4\n%8d %8d\n", Width, Height); else if (FullScale > 0) fprintf(Handle, "P5\n%8d %8d %8d\n", Width, Height, FullScale); DoLogString("Opened %s\n", Name); } else DoLogString("Could not open %s\n", Name); return Handle; } void LetAllRead(char *Fname) { chmod(Fname, S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it } void Terminate(cups_raster_t *ras,int fd,cups_dither_t **DitherState,cups_lut_t **Lut) { int CloseError, Col; /* * Close the raster stream... and the debug file */ cupsRasterClose(ras); DoLog("cups raster closed after %d sec\n",time(NULL)-StartTime,0); if (fd != 0) close(fd); if(JobFile != NULL) { CloseError = fclose(JobFile); DoLog("jobfile closed after %d sec with return value %d\n",time(NULL)-StartTime, CloseError); } //free the dither states for(Col = 0; Col < 4 ;++Col) { cupsDitherDelete(DitherState[Col]); cupsLutDelete(Lut[Col]); } /* * Termination, send an error message if required... */ DoLog("Bytes output by JBIG just before terminating = %d\n",BytesOutCountSingle,0); DoLog("c2esp terminating after %d sec. Processed %d pages\n",time(NULL)-StartTime,Page); if (Page == 0) { fprintf(stderr, ("ERROR: c2esp: No pages found!\n")); //return (1); } else { CloseLogging(); //cups seems to replace this by "Ready to print" so you don't see it if (DoBack) fprintf(stderr, "INFO: c2esp: Ready to print Blk %d Col %d percent\n",BlackPercent, ColourPercent); else fprintf(stderr, "INFO: c2esp: Ready to print (no bi-di communication)\n"); #if DEBUGFILES == 1 if(PrintFile != NULL) fclose(PrintFile); LetAllRead(PrintFileName); LetAllRead(LogFileName); LetAllRead(JobFileName); #endif } } void SaveDitherOut(cups_page_header2_t *header, int Col, int BlankColour,FILE *DitheredColourFile,FILE *CupsRasterFile) { //save one line in files, //DitherOutputBuffer[x] into DitheredColourFile //CupsLineBuffer[x] into CupsRasterFile //in the files 255=white 0=black (reverse of printer) int output=0; int x; if(Col == MonitorColour) //0=cyan 1=mag 2=yellow 3=black { //DoLog("SaveDitherOut BlankColour %d Resolution %d\n",BlankColour,header->HWResolution[0]); for(x=0;xcupsWidth;++x) { if(BlankColour==0 && header->HWResolution[0] == 300) { //dithered (7 bit shift to approximate 255/2) if(Col<3)output = 255 - (DitherOutputBuffer[x] * 255); //Black and grey if(Col==3) output = 255 - (DitherOutputBuffer[x] * 255/2); if (output < 0) output = 0; } else if(BlankColour==0 && header->HWResolution[0] == 600) { if(Col<3)output = 255 - (DitherOutputBuffer[x] * 255/2); //Black and grey if(Col==3) output = 255 - (DitherOutputBuffer[x] * 255/4); if (output < 0) output = 0; } else { output=255; //MinOut=0; } if (DitheredColourFile) fputc(output, DitheredColourFile); if(BlankColour==0 && header->cupsColorSpace == CUPS_CSPACE_RGB) { //cups raster chunky version if (Col < 3 ) output = (CupsLineBuffer[x*3+Col]); //next line should really be the min of the 3 colours? if (Col == 3 ) { output = (CupsLineBuffer[x*3+0]+CupsLineBuffer[x*3+1]+CupsLineBuffer[x*3+2])/3; } if (output < 0) output = 0; } else if(BlankColour==0 && header->cupsColorSpace == CUPS_CSPACE_K) { output = (255-CupsLineBuffer[x]); } else output=255; if (CupsRasterFile) fputc(output, CupsRasterFile); } } } void DitherProcess(cups_lut_t **Lut, cups_dither_t **DitherState, cups_page_header2_t *header, int Col, int *BlankColour) { //convert the bits in CupsLineBuffer to short ints in DitherInputBuffer for the current colour //checking if it's blank as we go #if DEBUGFILES==1 int output; #endif int x; *BlankColour=1; //if it remains 1 the line is blank and we don't need to dither. if(header->cupsColorSpace == CUPS_CSPACE_RGB) { for(x=0;xcupsWidth;++x) { //CupsLineBuffer RGB chunky section - TransformedBuffer is CMYK chunky if(CupsLineBuffer[3*x+Col] > CupsLineBufMax) CupsLineBufMax = CupsLineBuffer[3*x+Col]; if(TransformedBuffer[4*x+Col] > TransformedBufMax) TransformedBufMax = TransformedBuffer[4*x+Col]; if(DoTrans == 1) DitherInputBuffer[x]=TransformedBuffer[4*x+Col]; else DitherInputBuffer[x]=CupsLineBuffer[3*x+Col]<<4; //scale to 4096 if(DitherInputBuffer[x]>0) *BlankColour=0; } } else if(header->cupsColorSpace == CUPS_CSPACE_K) { for(x=0;xcupsWidth;++x) { //CupsLineBuffer K section if(CupsLineBuffer[x] > CupsLineBufMax) CupsLineBufMax = CupsLineBuffer[x]; DitherInputBuffer[x]=CupsLineBuffer[x]<<4; //scale to 4096 if(DitherInputBuffer[x]>0) *BlankColour=0; } } else DoLog("Unsupported cspace %d\n",header->cupsColorSpace,0); #if DEBUGFILES==1 //save in file, in the file 255=white 0=black(reverse of printer) if(Col == MonitorColour) //0=cyan 1=mag 2=yellow 3=black { for(x=0;xcupsWidth;++x) { output = 255 - (DitherInputBuffer[x]>>4); if (output < 0) output = 0; if (RawColourFile) fputc(output, RawColourFile); if (DitherInputBuffer[x]>MaxIn) MaxIn=DitherInputBuffer[x]; if (DitherInputBuffer[x]cupsWidth;++x) //added loop structure 17/12/13 { if (DitherOutputBuffer[x]>MaxOut) MaxOut=DitherOutputBuffer[x]; if (DitherOutputBuffer[x]cupsColorSpace == CUPS_CSPACE_RGB) BlackIndex=3; else BlackIndex=0; if(BlankColour == 0 && OutBitsPerPixel == 2) { if(y==0) DoLog("Copying to raster col %d bpp %d\n", Col, OutBitsPerPixel); // for(x=0;xcupsWidth;x=x+4) // { x=50; if( Col == 3) { RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/4]=255; RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/4]=255; // RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/4]=Dithered4ToPrintDark(DitherOutputBuffer,x); // RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/4]=Dithered4ToPrint(DitherOutputBuffer,x); } else RasForComp[y * RasForCompWidth + Col * (BytesPerColour)+x/4]=Dithered4ToPrint(DitherOutputBuffer,x); //hope that ras is zero initially // } } if(BlankColour == 0 && OutBitsPerPixel == 1) { if(y==0) DoLog("Copying to raster col %d bpp %d\n", Col, OutBitsPerPixel); //1 bit out per colour // for(x=0;xcupsWidth;x=x+8) // { x=50; if( Col == 3) { RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/8]=255; RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/8]=255; // RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,2); // RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,1); } else RasForComp[y * RasForCompWidth + Col * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,1); // } } } void PutBitsIntoRaster(cups_page_header2_t *header, int Col, int BlankColour, int y) { //put the bits into the appropriate position in the printer raster int BlackIndex, x; //BlackIndex is the band in the printer raster if(header->cupsColorSpace == CUPS_CSPACE_RGB) BlackIndex=3; else BlackIndex=0; if(BlankColour == 0 && OutBitsPerPixel == 2) { if(y==0) DoLog("Copying to raster col %d bpp %d\n", Col, OutBitsPerPixel); for(x=0;xcupsWidth;x=x+4) { if( Col == 3) { RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/4]=Dithered4ToPrintDark(DitherOutputBuffer,x); RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/4]=Dithered4ToPrint(DitherOutputBuffer,x); } else RasForComp[y * RasForCompWidth + Col * (BytesPerColour)+x/4]=Dithered4ToPrint(DitherOutputBuffer,x); //hope that ras is zero initially } } if(BlankColour == 0 && OutBitsPerPixel == 1) { if(y==0) DoLog("Copying to raster col %d bpp %d\n", Col, OutBitsPerPixel); //1 bit out per colour for(x=0;xcupsWidth;x=x+8) { if( Col == 3) { RasForComp[y * RasForCompWidth + BlackIndex * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,2); RasForComp[y * RasForCompWidth + (BlackIndex+1) * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,1); } else RasForComp[y * RasForCompWidth + Col * (BytesPerColour)+x/8]=Dithered8ToPrint(DitherOutputBuffer,x,1); } } } /* * 'main()' - Main entry and processing of driver. */ int /* O - Exit status */ main(int argc, char *argv[]) /* I - Number of command-line arguments, Command-line arguments */ { int fd; /* File descriptor */ ppd_file_t *ppd; /* PPD file */ cups_raster_t *ras; /* Raster stream from cups */ cups_page_header2_t header; /* Page header from cups */ cups_cmyk_t *cmykTrans300; /* cmyk transform for cups 300dpi*/ cups_cmyk_t *cmykTrans600; /* cmyk transform for cups 600dpi*/ int RemainingPixels; int Stripe, y; int StripeEnd; //index of last byte in current stripe int StripeHeight; //height of current stripe int Col,i,x; int BlankColour; //boolean to record if the line is blank to save time int argi; cups_lut_t *Lut[4]; /* Dither lookup tables */ cups_dither_t *DitherState[4]; /* Dither states */ long RasForCompHeight; StartTime = time(NULL); KeepAwakeStart = time(NULL); #if defined(HAVE_SIGACTION) && !defined(HAVE_SIGSET) struct sigaction action; /* Actions for POSIX signals */ #endif /* * Check command-line... */ if (argc < 6 || argc > 7) //wrong no of arguments { fprintf(stderr, ("Usage: %s job-id user title copies options [file]\n"), "rastertoek"); return (1); } char data; int datalen; cups_sc_bidi_t bidi; cups_sc_status_t status; /* Tell cupsSideChannelDoRequest() how big our buffer is... */ datalen = 1; /* Get the bidirectional capabilities, waiting for up to 1 second */ status = cupsSideChannelDoRequest(CUPS_SC_CMD_GET_BIDI, &data, &datalen, 1.0); /* Use the returned value if OK was returned and the length is still 1 */ if (status == CUPS_SC_STATUS_OK && datalen == 1) { bidi = (cups_sc_bidi_t) data; DoBack = (bidi == CUPS_SC_BIDI_NOT_SUPPORTED ? 0 : 1); } else { bidi = CUPS_SC_BIDI_NOT_SUPPORTED; DoBack = 0; } #if TESTING == 1 DoBack = 0; //If testing never ask for replies #endif #if DEBUGFILES == 1 SetupLogging("c2esp",DoBack,LogFileName); #else SetupLogging("c2esp",DoBack,""); #endif setbuf(stderr, NULL); fprintf(stderr, ("DEBUG: ================ %s ====================================\n"),Version); DoLogString("Starting %s\n",Version); DoLog("Compiled with DEBUGFILES = %d, TESTING = %d\n", DEBUGFILES, TESTING); DoLog("Number of command line parameters: %d\n", argc, 0); for (argi = 0; argi < argc; argi++) DoLogString(" param: '%s'\n", argv[argi]); DoLogString("End of command-line parameters\n", ""); DoLogString("Bi-di/backchannel support: %s\n", (bidi == CUPS_SC_BIDI_NOT_SUPPORTED ? "false" : "true")); DoLog("DoBack value: %d\n", DoBack, 0); MarkerSetup(); /* * Open the page stream... */ if (argc == 7) { if ((fd = open(argv[6], O_RDONLY)) == -1) { fprintf(stderr, ("ERROR: c2esp: Unable to open raster file - %s\n"), strerror(errno)); sleep(1); return (1); } } else fd = 0; DoLog("opening raster\n",0,0); ras = cupsRasterOpen(fd, CUPS_RASTER_READ); if(! ras) DoLog("Problem opening cups raster",0,0); /* * Set up the colour separation system * */ DoLogString("opening ppd %s\n",getenv("PPD")); ppd = ppdOpenFile(getenv("PPD")); if(ppd) { DoLog("Opened ppd OK. Reading from ppd\n",0,0); cmykTrans300 = cupsCMYKLoad(ppd, "RGB", "", "300x1200dpi"); cmykTrans600 = cupsCMYKLoad(ppd, "RGB", "", "600x1200dpi"); ppdClose(ppd); DoLog("InkChannels 300dpi=%d 600dpi=%d\n",cmykTrans300->num_channels,cmykTrans600->num_channels); } else DoLogString("Problem opening ppd %s\n",getenv("PPD")); /* * Register a signal handler to eject the current page if the * job is cancelled. */ Canceled = 0; #ifdef HAVE_SIGSET /* Use System V signals over POSIX to avoid bugs */ sigset(SIGTERM, CancelJob); #elif defined(HAVE_SIGACTION) memset(&action, 0, sizeof(action)); sigemptyset(&action.sa_mask); action.sa_handler = CancelJob; sigaction(SIGTERM, &action, NULL); #else signal(SIGTERM, CancelJob); #endif /* HAVE_SIGSET */ /* * Initialize the print device... */ #if DEBUGFILES == 1 JobFile = fopen(JobFileName, "w"); if (JobFile != NULL) DoLogString("JobFile %s Opened\n", JobFileName); else DoLogString("JobFile %s failed to open\n", JobFileName); PrintFile = fopen(PrintFileName, "w"); if (PrintFile != NULL) DoLogString("PrintFile %s Opened\n", PrintFileName); else DoLogString("PrintFile %s failed to open\n", PrintFileName); #endif /* read the first header */ if(cupsRasterReadHeader2(ras, &header) == 1) { DoLog("First page Header read after %d sec\n", time(NULL)-StartTime,0); /* Check header for validity */ if(HeaderInvalid(&header) == 1) { Canceled = 1; } else { if(header.HWResolution[0] == 300) OutBitsPerPixel = 1; else OutBitsPerPixel = 2; SetUpDither(Lut, DitherState, header.cupsWidth, OutBitsPerPixel); SetupPrinter(&header); DoLog("Printer should be ready now\n",0,0); } /* * Process pages as needed... */ Page = 0; //start of loop for each page do { DoLog("Header read\n", 0,0); if (Canceled) break; if(header.cupsWidth == -1) break; Page ++; DoLog("PAGE %d width %d\n", Page, header.cupsWidth); /* * Start the page... */ BytesOutCountSingle = 0; //initialise counter RasForCompHeight = 0; /* will accumulate the height for one page */ //StartTime=time(NULL); SetPaperSize(KodakPaperSize, header.PageSize[1]); if(header.HWResolution[0] == 300) OutBitsPerPixel = 1; else OutBitsPerPixel = 2; BytesPerColour = (((header.cupsWidth * OutBitsPerPixel + 7) / 8) + 31) / 32 * 32; //round each colour up to 32 bytes if (header.cupsColorSpace == CUPS_CSPACE_RGB) //colour only RGB now { DoLog("Colour cups raster w = %d h = %d\n", header.cupsWidth, header.cupsHeight); DoLog("Colour cups bits per pixel = %d, bits per colour = %d\n", header.cupsBitsPerPixel, header.cupsBitsPerColor); DoLog("Colour cups raster bytes per line = %d bits per line = %d\n", header.cupsBytesPerLine, header.cupsBytesPerLine * 8); RasForCompWidth = BytesPerColour * 5; fprintf(stderr, "INFO: p%d Colour dithering\n",Page); } else if (header.cupsColorSpace == CUPS_CSPACE_K)//monochrome { fprintf(stderr, "INFO: p%d Monochrome\n",Page); DoLog("Mono cups raster w = %d h = %d\n", header.cupsWidth, header.cupsHeight); DoLog("Mono cups raster bytes per line = %d bits per line = %d\n", header.cupsBytesPerLine, header.cupsBytesPerLine * 8); RasForCompWidth = BytesPerColour * 2; } else { DoLog("Unknown cupsColorSpace = %d\n", header.cupsColorSpace, 0); DoLog("Supported values are RGB %d and K %d\n", CUPS_CSPACE_RGB, CUPS_CSPACE_K); } #if DEBUGFILES == 1 //open dither files here RawColourFile = OpenPbm(RawColourFileName, header.cupsWidth, header.cupsHeight, 255); DitheredColourFile = OpenPbm(DitheredColourFileName, header.cupsWidth, header.cupsHeight, 255); //open debug files dfp = OpenPbm(RasForCompFileName, RasForCompWidth * 8, StripeHeightMax, 0); Blackfp = OpenPbm(BlackRasFileName, BytesPerColour * 8, StripeHeightMax, 0); Greyfp = OpenPbm(GreyRasFileName, BytesPerColour * 8, StripeHeightMax, 0); CupsRasterFile = OpenPbm(CupsRasterFileName, header.cupsWidth, header.cupsHeight, 255); if(header.cupsColorSpace==CUPS_CSPACE_K) { DoLog("Deleting any existing CMY raster files",0,0); remove(CyanRasFileName); remove(MagentaRasFileName); remove(YellowRasFileName); } else { Cyanfp = OpenPbm(CyanRasFileName, BytesPerColour * 8, StripeHeightMax, 0); Magentafp = OpenPbm(MagentaRasFileName, BytesPerColour * 8, StripeHeightMax, 0); Yellowfp = OpenPbm(YellowRasFileName, BytesPerColour * 8, StripeHeightMax, 0); } #endif if(header.cupsWidth == -1) { DoLog("Width %d is <= 0? so not allocating buffers\n",header.cupsWidth,0); Terminate(ras,fd,DitherState,Lut); exit(0); } else { DoLog("Width %d is >0? so allocating buffers\n",header.cupsWidth,0); AllocateBuffers(&header); // test buffers //if(!CupsLineBuffer) DoLog("missing CupsLineBuffer\n",0,0); //else DoLog("Main:Address %d",(long) CupsLineBuffer,0); } StripeEnd = -1; //index of the last byte of the stripe MinOut=255;MaxOut=0; //initialise if(Page == 1) SetupJob(&header); StartPrinterPage( &header); //prepare for compression JBIG85 DoLog("initialising Compression\n",0,0); jbg85_enc_init(&JbigState, RasForCompWidth * 8, header.cupsHeight, output_jbig, JobFile); jbg85_enc_options(&JbigState, -1, StripeHeightMax, -1); //default options ie with variable length // Loop for each source stripe for (Stripe = 0; Stripe * StripeHeightMax < header.cupsHeight; ++Stripe) { //clear the raster for(x=0;x Stripe * StripeHeightMax + StripeHeightMax) StripeHeight = StripeHeightMax; else StripeHeight = header.cupsHeight - (Stripe * StripeHeightMax); if(Stripe == 1) DoLog("First stripe at %d sec\n", time(NULL)-StartTime, 0); // Loop for each line in the stripe for (y = 0; (y < StripeHeightMax) && (y + Stripe * StripeHeightMax < header.cupsHeight); ++y ) { if (Canceled) break; KeepAwakeStart = KeepAwake(KeepAwakeStart, 10, PrintFile); //Keep the printer connection awake if (header.cupsBitsPerColor == 8) // do dithering { if(y == 0) { DoLog("Doing 1st line in stripe %d. BytesPerLine %d\n", Stripe, header.cupsBytesPerLine); if(!ras) DoLog("cups raster missing",0,0); if(!CupsLineBuffer) DoLog("cups line buffer missing",0,0); } //read a line. The longest line 600dpi 8.5 in = 20400 bytes for 8 bit CMYK values //DoLog("Reading stripe %d line %d\n", Stripe, y); if (!cupsRasterReadPixels(ras, CupsLineBuffer, header.cupsBytesPerLine)) break; //CupsLineBuffer holds the chunky 8 bit data of a whole line if(y == 0) DoLog("Read first line from cups raster\n", Stripe, 0); #if TESTING == 1 //fix the CupsLineBuffer for testing with a gradient in the top 32 lines if(y + Stripe * StripeHeightMax < 32) InsertGradientChunky(CupsLineBuffer, &header, y); #endif // the colour separation. Note the cups transforms assume chunky data if (DoTrans == 1) { RemainingPixels = header.cupsWidth; if (header.cupsColorSpace == CUPS_CSPACE_RGB) { if(y == 0) DoLog("Doing transform & dither (CMYK) stripe %d line %d\n", Stripe, y); if(header.HWResolution[0] == 300) cupsCMYKDoRGB(cmykTrans300, CupsLineBuffer, TransformedBuffer, RemainingPixels); else cupsCMYKDoRGB(cmykTrans600, CupsLineBuffer, TransformedBuffer, RemainingPixels); // cupsDoRGB scales up to 4096 a short int from the unsigned char input 255 for(Col = 0; Col<4; ++Col) { DitherProcess(Lut, DitherState, &header, Col, &BlankColour); PutBitsIntoRaster(&header, Col, BlankColour, y); } } if (header.cupsColorSpace == CUPS_CSPACE_K) { if(y == 0) DoLog("Doing dither (K) stripe %d line %d\n", Stripe, y); Col=3; //just black&grey DitherProcess(Lut, DitherState, &header, Col, &BlankColour); PutBitsIntoRaster(&header, Col, BlankColour, y); } //DummyTransform(CupsLineBuffer, TransformedBuffer, RemainingPixels); if(y == 0) DoLog("Done dither stripe %d line %d\n", Stripe, y); } /* if(header.cupsColorSpace == CUPS_CSPACE_RGB) { for(Col = 0; Col<4; ++Col) FakePutBitsIntoRaster(&header, Col, BlankColour, y); } // IS THIS RIGHT? PutBitsIntoRaster(&header, 3? FOR Kk raster? else PutBitsIntoRaster(&header, 3, BlankColour, y); */ } //end of 8 bits per colour section else DoLog("cupsBitsPerColor %d is not handled\n",header.cupsBitsPerColor,0); } //end of line loop StripeEnd = StripeHeight * RasForCompWidth - 1; //so do not have to increment in the loop //map 2 bit per pixel data of the line to suit the printer and look for printing in the stripe SkipStripe = 1; for(i=0;i<=StripeEnd;++i) { // may not be needed with dither if (header.cupsBitsPerColor==2) RasForComp[i] = Map11To10And10To01[RasForComp[i]]; //map 2 bit if(RasForComp[i]!=0) SkipStripe = 0; //look for printing } #if DEBUGFILES == 1 //write the stripe into the raster files if(SkipStripe != 1) { //store the raster for debugging - does not seem to be viewable properly when 600dpi colour if (dfp) fwrite(&RasForComp[0], 1, StripeEnd, dfp); //store the CMYK rasters separately if(Cyanfp && Magentafp && Yellowfp && Blackfp && Greyfp) { for(i=0;i<(StripeEnd + RasForCompWidth + 1);i=i+RasForCompWidth) { fwrite(&RasForComp[i + 0 * BytesPerColour], 1, BytesPerColour, Cyanfp); fwrite(&RasForComp[i + 1 * BytesPerColour], 1, BytesPerColour, Magentafp); fwrite(&RasForComp[i + 2 * BytesPerColour], 1, BytesPerColour, Yellowfp); fwrite(&RasForComp[i + 3 * BytesPerColour], 1, BytesPerColour, Blackfp); fwrite(&RasForComp[i + 4 * BytesPerColour], 1, BytesPerColour, Greyfp); } } else if(Blackfp && Greyfp) { for(i=0;i<(StripeEnd + RasForCompWidth + 1);i=i+RasForCompWidth) { fwrite(&RasForComp[i + 0 * BytesPerColour], 1, BytesPerColour, Blackfp); fwrite(&RasForComp[i + 1 * BytesPerColour], 1, BytesPerColour, Greyfp); } } DoLog("Rasters stored at %d sec\n",time(NULL)-StartTime,0); } #endif //DoLog("StripeEnd=%d SkipStripe=%d\n",StripeEnd,SkipStripe); if(!SkipStripe) RasForCompHeight = RasForCompHeight + StripeHeight; PrintOneStripe(&RasForComp[0], Stripe, StripeHeight, header, JobFile); //copy the last 2 lines of the stripe, before the first line of RasForComp for(i=0;i 0) ShutdownPrinter(); //there was at least 1 page Terminate(ras,fd,DitherState,Lut); return(0); } c2esp-27/src/command2esp.c0000644000175000017500000001457212260510507012413 00000000000000/* * * Kodak ESP command filter for CUPS. * * Copyright 2011 - Sept 2012 by P.Newall. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Contents: * * main() - Main entry and command processing. */ /* filter must implement the following: Exchange for test page Maintenance=002? 0096, OK, Maintenance Started; Exchange for alignment Maintenance=006? 0096, OK, Maintenance Started; Exchange for clean Maintenance=003? 0096, OK, Maintenance Started; */ /*#define DEBUGFILES 0 DEBUGFILES 1 creates files in /tmp to help debug */ /*#define TESTING 0 TESTING 1 suppresses output to the printer to help debug */ /* * Include necessary headers... */ #include "../config.h" #include #include //FlushBackChannel, and the side channel functions and constants #include "string.h" #include #include //files #include //time functions used for debugging #include //chmod #if HAVE_CUPSFILTERS_DRIVER_H == 1 #include //has the dither functions #else #include //has the dither functions #endif #include "c2espcommon.h" //the common library time_t StartTime; //FILE *LogFile = NULL; //file descriptor for log file FILE *PrintFile = NULL; //file descriptor for debug file //char BackBuf[32000]; //for the back channel replies from the printer //int BackBufLen=sizeof(BackBuf)-1, int DoBack=1; /* Enables the back channel comms */ /* time_t KeepAwake(time_t Start, int Interval) { // Keeps the printer connection awake by sending DeviceStatus query not sooner than the specified interval in seconds // Usage: Start = KeepAwake(Start, Interval); if(time(NULL) - Start > Interval) { DoLog("Keeping printer awake by DeviceStatus?\n",0,0); GoodExchange(PrintFile, "DeviceStatus?", "0101,DeviceStatus.ImageDevice", DoBack, 1, 1.0); return (time(NULL)); } else return (Start); } */ void KeepAwakeFor(int Duration, int Interval) { /* Keep the printer connection awake for Duration seconds, doing KeepAwake every Interval seconds */ time_t KeepAwakeStart; int i; KeepAwakeStart = time(NULL); for (i=0;i 7) { /* * We don't have the correct number of arguments; write an error message * and return. */ fputs("ERROR: command2esp job-id user title copies options [file]\n", stderr); return (1); } /* * Open the command file as needed... */ if (argc == 7) { if ((fp = fopen(argv[6], "r")) == NULL) { perror("ERROR: Unable to open command file - "); return (1); } } else fp = stdin; /* * Read the commands from the file and send the appropriate commands... */ while (fgets(line, sizeof(line), fp) != NULL) { /* * Drop trailing newline... */ lineptr = line + strlen(line) - 1; if (*lineptr == '\n') *lineptr = '\0'; /* * Skip leading whitespace... */ for (lineptr = line; isspace(*lineptr); lineptr ++); /* isspace is in ctype.h */ /* * Skip comments and blank lines... */ if (*lineptr == '#' || !*lineptr) continue; /* * Parse the command... */ if (strncasecmp(lineptr, "Clean", 5) == 0) { /* Clean heads...*/ fputs("INFO: command2esp Clean print head\n", stderr); DoLog("Clean print head\n",0,0); GoodExchange(PrintFile, "Maintenance=003?", "0096, OK, Maintenance Started;", DoBack, 1, 1.0); KeepAwakeFor(80,10); } else if (strncasecmp(lineptr, "PrintAlignmentPage", 18) == 0) { /* Print alignment page...*/ fputs("INFO: command2esp Print alignment page\n", stderr); DoLog("Print alignment page\n",0,0); GoodExchange(PrintFile, "Maintenance=006?", "0096, OK, Maintenance Started;", DoBack, 1, 1.0); KeepAwakeFor(80,10); } else if (strncasecmp(lineptr, "PrintSelfTestPage", 17) == 0) { fputs("INFO: command2esp Print Self Test Page\n", stderr); DoLog("Print Self Test Page\n",0,0); GoodExchange(PrintFile, "Maintenance=002?", "0096, OK, Maintenance Started;", DoBack, 1, 1.0); // Hero 9.1 does not need to be kept awake. ESP 5250 does? //sleep(80); //did not work for ESP 5250 KeepAwakeFor(80,15); } else if (strncasecmp(lineptr, "ReportLevels", 12) == 0) { /* Report ink levels... */ StatusLength=abs(GoodExchange(PrintFile, "DeviceStatus?", "0101,DeviceStatus.ImageDevice", DoBack, 1, 1.0)); DoLog("StatusLength=%d\n",StatusLength,0); /* you can get unexpected reply if there is an ink low warning then GoodExchange will be -ve */ /* aquire ink levels here? DeviceStatus.Printer.InkLevelPercent.Colour=nn%&DeviceStatus.Printer.InkLevelPercent.Black=nn% */ if(StatusLength>0) { /* GoodExchange will have found the marker levels and set the globals BlackPercent and ColourPercent */ MarkerSetup(); // set the levels displayed in system-config-printer fprintf(stderr,"ATTR: marker-levels=%d,%d\n",BlackPercent,ColourPercent); } } else if (strncasecmp(lineptr, "SetAlignment", 12) == 0) { /* * Set head alignment... may not be possible for ESP printers - do nothing */ } else fprintf(stderr, "ERROR: Invalid printer command \"%s\"!\n", lineptr); } /* * Close the files and return... */ if (fp != stdin) fclose(fp); CloseLogging(); return (0); } c2esp-27/src/Makefile.in0000644000175000017500000005041312262021560012074 00000000000000# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ #C2esp makefile source for src directory VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = c2esp$(EXEEXT) c2espC$(EXEEXT) command2esp$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(drvdir)" PROGRAMS = $(bin_PROGRAMS) am_c2esp_OBJECTS = c2esp.$(OBJEXT) c2espcommon.$(OBJEXT) c2esp_OBJECTS = $(am_c2esp_OBJECTS) c2esp_LDADD = $(LDADD) am_c2espC_OBJECTS = c2espC.$(OBJEXT) c2espcommon.$(OBJEXT) c2espC_OBJECTS = $(am_c2espC_OBJECTS) c2espC_LDADD = $(LDADD) am_command2esp_OBJECTS = command2esp.$(OBJEXT) c2espcommon.$(OBJEXT) command2esp_OBJECTS = $(am_command2esp_OBJECTS) command2esp_LDADD = $(LDADD) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(c2esp_SOURCES) $(c2espC_SOURCES) $(command2esp_SOURCES) DIST_SOURCES = $(c2esp_SOURCES) $(c2espC_SOURCES) \ $(command2esp_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } DATA = $(drv_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ HAVE_CUPSCONFIG = @HAVE_CUPSCONFIG@ HAVE_PPDC = @HAVE_PPDC@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ # install directory for cups filters bindir = $(cupsfilterdir) build_alias = @build_alias@ builddir = @builddir@ cupsdatadir = @cupsdatadir@ cupsfilterdir = @cupsfilterdir@ cupsversion = @cupsversion@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ ppdlist = @ppdlist@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # what flags you want to pass to the C compiler & linker AM_CFLAGS = --pedantic -Wall -std=c99 -O2 AM_LDFLAGS = EXTRA_DIST = KodakESP_16.drv KodakESP_C_07.drv c2esp_SOURCES = c2esp.c c2espcommon.c c2espcommon.h c2espC_SOURCES = c2espC.c c2espcommon.c c2espcommon.h command2esp_SOURCES = command2esp.c c2espcommon.c c2espcommon.h # install directory for cups drv files drvdir = $(cupsdatadir)/drv/@PACKAGE@ # for drvfile in *.drv; do \ # ppdc $(drvfile); \ # done; # data to install drv_DATA = KodakESP_16.drv KodakESP_C_07.drv all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) c2esp$(EXEEXT): $(c2esp_OBJECTS) $(c2esp_DEPENDENCIES) $(EXTRA_c2esp_DEPENDENCIES) @rm -f c2esp$(EXEEXT) $(AM_V_CCLD)$(LINK) $(c2esp_OBJECTS) $(c2esp_LDADD) $(LIBS) c2espC$(EXEEXT): $(c2espC_OBJECTS) $(c2espC_DEPENDENCIES) $(EXTRA_c2espC_DEPENDENCIES) @rm -f c2espC$(EXEEXT) $(AM_V_CCLD)$(LINK) $(c2espC_OBJECTS) $(c2espC_LDADD) $(LIBS) command2esp$(EXEEXT): $(command2esp_OBJECTS) $(command2esp_DEPENDENCIES) $(EXTRA_command2esp_DEPENDENCIES) @rm -f command2esp$(EXEEXT) $(AM_V_CCLD)$(LINK) $(command2esp_OBJECTS) $(command2esp_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c2esp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c2espC.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c2espcommon.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/command2esp.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` install-drvDATA: $(drv_DATA) @$(NORMAL_INSTALL) @list='$(drv_DATA)'; test -n "$(drvdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(drvdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(drvdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(drvdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(drvdir)" || exit $$?; \ done uninstall-drvDATA: @$(NORMAL_UNINSTALL) @list='$(drv_DATA)'; test -n "$(drvdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(drvdir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(DATA) installdirs: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(drvdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-drvDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-drvDATA .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \ distclean distclean-compile distclean-generic distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-binPROGRAMS install-data install-data-am \ install-drvDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-binPROGRAMS uninstall-drvDATA @echo "bindir is $(bindir)"; @echo "drvdir is $(drvdir)"; # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: c2esp-27/src/KodakESP_16.drv0000644000175000017500000002371112254021052012451 00000000000000// // // Driver info file for PPDs. // Version for all dithered filter // // 1 dec 2013: ShortNickName added to stop ppdc warnings. // NickName and ShortNickName changed to ModelName to help Ubuntu auto identify printers. // It seems that the ShortNickName is used to build the database for system-config-printer? // But if there is no ShortNickName, NickName is used instead? // The first word of ShortNickName gets used for the maker in the database? // ppdc still gives warnings when short nickname is >31 chars (ESP41 and ESP61) // but it still builds the ppd files. I have not found a work around for this. // Include necessary files... #include #include // Common stuff for all drivers... Attribute "cupsVersion" "" "1.4" Attribute "FileSystem" "" "False" Attribute "LandscapeOrientation" "" "Plus90" Attribute "TTRasterizer" "" "Type42" Copyright "Copyright 2011-2012 by Paul Newall" Font * Version "1.6" // Kodak { Manufacturer "Eastman Kodak Company" //was Eastman Kodak DriverType custom ManualCopies Yes ColorDevice Yes Throughput 8 Attribute "cupsSNMPSupplies" "" "False" // hope to stop the "may not be connected" message VariablePaperSize Yes MinSize 36 36 MaxSize 1080 86400 Filter application/vnd.cups-raster 50 /usr/lib/cups/filter/c2esp Filter application/vnd.cups-command 50 /usr/lib/cups/filter/command2esp Attribute "cupsCommands" "" "Clean PrintSelfTestPage PrintAlignmentPage ReportLevels" ColorDevice Yes Attribute DefaultColorSpace "" "CMYK" HWMargins 3 3 3 3 //1mm all round option "MediaSize" PickOne AnySetup 30 MediaSize Executive MediaSize Letter MediaSize Legal *MediaSize A4 MediaSize A5 MediaSize A6 MediaSize 8x10 MediaSize Photo4x6 //MediaSize 4x6 MediaSize EnvISOB5 MediaSize EnvC5 MediaSize EnvDL MediaSize Env10 option "Resolution" PickOne AnySetup 20 //Resolution colorspace bits-per-color row-count row-feed row-step name Choice 300x1200dpi/300x1200 "<>setpagedevice" *Choice 600x1200dpi/600x1200 "<>setpagedevice" //res/media dens gamma 3x3matrix // input // C M Y // o C 1 0 0 // u M 0 1 0 // t Y 0 0 1 ColorProfile 300x1200dpi/- 1.0 1.0 1.0 0.0 0.0 -0.1 1.0 0.0 0.0 -0.3 1.0 ColorProfile 600x1200dpi/- 1.0 1.4 //gamma above 1.0 works for 600dpi 1.0 -0.1 0.0 -0.1 1.0 0.0 0.0 -0.4 1.0 // Plain mapping for calibration tests // ColorProfile 300x1200dpi/- 1.0 1.0 // 1.0 0.0 0.0 // 0.0 1.0 0.0 // 0.0 0.0 1.0 // ColorProfile 600x1200dpi/- 1.0 1.7 //gamma 1.5 to 1.7 is good for dithered // 1.0 0.0 0.0 // 0.0 1.0 0.0 // 0.0 0.0 1.0 Attribute cupsInkChannels "" "4" Attribute cupsInkLimit "" "2.0" Attribute cupsBlackGeneration "" "0.0 0.0" Attribute "marker-colors" "" "black magenta" option "ColorModel" PickOne AnySetup 10 //ColorModel name colorspace colororder compression *ColorModel RGB/Color rgb chunky 0 ColorModel Gray/BlackAndWhite k chunky 0 //List of model names for reference //"KODAK ESP 9200 Series AiO" //"KODAK ESP 7200 Series AiO" //"KODAK ESP Office 6100 Series AiO" //"KODAK ESP Office 4100 Series AiO" //"KODAK ESP 5200 Series AiO" //"KODAK ESP 3200 Series AiO" //"KODAK ESP 9 AiO" //"KODAK ESP 7 AiO" //"KODAK ESP 5 AiO" //"KODAK ESP-3 AiO" //"KODAK 5100 AiO" //"KODAK 5300 AiO" //"KODAK 5500 AiO" // Kodak ESP 9 duplex { ModelName "Kodak ESP 9 AiO" Attribute NickName "" "Kodak ESP 9 AiO" Attribute ShortNickName "" "Kodak ESP 9 AiO" Attribute Product "" "(Kodak ESP 9 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 9 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_9.ppd" PCFileName "KESP9.ppd" ModelNumber 9 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 7 duplex { ModelName "Kodak ESP 7 AiO" Attribute NickName "" "Kodak ESP 7 AiO" Attribute ShortNickName "" "Kodak ESP 7 AiO" Attribute Product "" "(Kodak ESP 7 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 7 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_7.ppd" PCFileName "KESP7.ppd" ModelNumber 7 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 5 duplex { ModelName "Kodak ESP 5 AiO" Attribute NickName "" "Kodak ESP 5 AiO" Attribute ShortNickName "" "Kodak ESP 5 AiO" Attribute Product "" "(Kodak ESP 5 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 5 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_5.ppd" PCFileName "KESP5.ppd" ModelNumber 5 InputSlot 0 MainTray } // Kodak ESP 3 { ModelName "Kodak ESP 3 AiO" Attribute NickName "" "Kodak ESP 3 AiO" Attribute ShortNickName "" "Kodak ESP 3 AiO" Attribute Product "" "(Kodak ESP 3 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP-3 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_3.ppd" PCFileName "KESP3.ppd" ModelNumber 3 InputSlot 0 MainTray } // Kodak ESP 3xxx Series without duplex { ModelName "Kodak ESP 3200 Series AiO" Attribute NickName "" "Kodak ESP 3200 Series AiO" Attribute ShortNickName "" "Kodak ESP 3200 Series AiO" Attribute Product "" "(Kodak ESP 3200 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 3200 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_32xx_Series.ppd" PCFileName "KESP32xx.ppd" ModelNumber 3250 } // Kodak ESP 52xx Series without duplex { ModelName "Kodak ESP 5200 Series AiO" Attribute NickName "" "Kodak ESP 5200 Series AiO" Attribute ShortNickName "" "Kodak ESP 5200 Series Aio" Attribute Product "" "(Kodak ESP 5200 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 5200 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_52xx_Series.ppd" PCFileName "KESP52xx.ppd" ModelNumber 5250 } // Kodak ESP 51xx Series optional duplex { ModelName "Kodak 5100 AiO" Attribute NickName "" "Kodak 5100 AiO" Attribute ShortNickName "" "Kodak 5100 AiO" Attribute Product "" "(Kodak 5100 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK 5100 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_51xx_Series.ppd" PCFileName "KESP51xx.ppd" ModelNumber 5100 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 53xx Series optional duplex { ModelName "Kodak 5300 AiO" Attribute NickName "" "Kodak 5300 AiO" Attribute ShortNickName "" "Kodak 5300 AiO" Attribute Product "" "(Kodak 5300 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK 5300 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_53xx_Series.ppd" PCFileName "KESP53xx.ppd" ModelNumber 5300 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 55xx Series with duplex { ModelName "Kodak 5500 AiO" Attribute NickName "" "Kodak 5500 AiO" Attribute ShortNickName "" "Kodak 5500 AiO" Attribute Product "" "(Kodak 5500 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK 5500 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_55xx_Series.ppd" PCFileName "KESP55xx.ppd" ModelNumber 5500 // Duplex normal //reported that back side was upside down on 5500 // Duplex flip //reported that back side was mirror image on 5500 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 41xx Series without duplex? { ModelName "Kodak ESP Office 4100 Series AiO" Attribute NickName "" "Kodak ESP Office 4100 Series AiO" Attribute ShortNickName "" "Kodak ESP Office 4100 Series AiO" //more than 31 chars? Attribute Product "" "(Kodak ESP Office 4100 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP Office 4100 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_41xx_Series.ppd" PCFileName "KESP41xx.ppd" ModelNumber 4100 } // Kodak ESP 61xx Series with duplex { ModelName "Kodak ESP Office 6100 Series AiO" Attribute NickName "" "Kodak ESP Office 6100 Series AiO" Attribute ShortNickName "" "Kodak ESP Office 6100 Series AiO" //more than 31 chars? Attribute Product "" "(Kodak ESP Office 6100 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP Office 6100 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_61xx_Series.ppd" PCFileName "KESP61xx.ppd" ModelNumber 6150 Duplex rotated } // Kodak ESP 72xx Series non-dithered/dithered with duplex and photo tray { ModelName "Kodak ESP 7200 Series AiO" Attribute NickName "" "Kodak ESP 7200 Series AiO" Attribute ShortNickName "" "Kodak ESP 7200 Series AiO" Attribute Product "" "(Kodak ESP 7200 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 7200 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_72xx_Series.ppd" PCFileName "KESP72xx.ppd" ModelNumber 7250 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP 92xx Series non-dithered/dithered with duplex and photo tray { ModelName "Kodak ESP 9200 Series AiO" Attribute NickName "" "Kodak ESP 9200 Series AiO" Attribute ShortNickName "" "Kodak ESP 9200 Series AiO" Attribute Product "" "(Kodak ESP 9200 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 9200 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_92xx_Series.ppd" PCFileName "KESP92xx.ppd" ModelNumber 9250 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } } c2esp-27/src/Makefile.am0000644000175000017500000000151312260555226012071 00000000000000#C2esp makefile source for src directory # what flags you want to pass to the C compiler & linker AM_CFLAGS = --pedantic -Wall -std=c99 -O2 AM_LDFLAGS = EXTRA_DIST = KodakESP_16.drv KodakESP_C_07.drv # install directory for cups filters bindir = $(cupsfilterdir) @echo "bindir is $(bindir)"; # this lists the binaries to produce, the (non-PHONY, binary) targets in # the previous manual Makefile bin_PROGRAMS = c2esp c2espC command2esp c2esp_SOURCES = c2esp.c c2espcommon.c c2espcommon.h c2espC_SOURCES = c2espC.c c2espcommon.c c2espcommon.h command2esp_SOURCES = command2esp.c c2espcommon.c c2espcommon.h # install directory for cups drv files drvdir = $(cupsdatadir)/drv/@PACKAGE@ @echo "drvdir is $(drvdir)"; # for drvfile in *.drv; do \ # ppdc $(drvfile); \ # done; # data to install drv_DATA = KodakESP_16.drv KodakESP_C_07.drv c2esp-27/src/c2espC.c0000644000175000017500000006026012266564523011332 00000000000000/* * * Kodak ESP Cxxx (OPL?) Control Language filter for the Common UNIX * Printing System (CUPS). * * copyright Paul Newall May 2010 - Jan 2014. VERSION 2.7 (c2esp27) * SUPPORT FOR ESP Cxxxx and Hero SERIES * patch by user awl29 applied to fix problems with non bi-directional printers, smb shared * data chunk size limit applied * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Params: job-id user title copies options [file] * options = "noback" disables all calls to the back channel for testing. * This filter is based loosely on c2esp */ #define MAXDATACHUNK 65511 /* it seems windows smb printer can't handle more than 65K at a time? maybe others too */ // debugfiles and testing are defined in c2espcommon.h because they are used in c2espcommon.c /* #define DEBUGFILES 0 DEBUGFILES 1 creates files in /tmp to help debug Currently a large number of files: KodakPrintLog = text file showing progress of the filter RasForComp.pbm or ppm = the raster read from cups raster view with image viewer. KodakUncompressed = The binary page data before compression. KodakCompPage = The zlib compressed page data KodakPrintFile = The data that is sent to the printer */ #define TESTING 0 /* TESTING 1 suppresses the output to the printer. Used in development. */ /* #include "config.h" */ #include #include //FlushBackChannel, and the side channel functions and constants #include //files #include #include #include #include //time functions used for debugging #include "c2espcommon.h" //the common library of c2esp and c2espC /* for gzip */ #include #define SET_BINARY_MODE(file) #define CHUNK 16384 /* * Constants... */ char *Version = "c2espC27"; /* * Globals... */ unsigned char *CupsLineBuffer; //buffer for one line of the cups raster unsigned char *DataLineBuffer; //buffer for one uncompressed line char KodakPaperSize[50]; /* String that the printer expects for paper size */ int OutBitsPerPixel, /* Number of bits per color per pixel for printer*/ Duplex, /* Current duplex mode */ Page, /* Current page number */ Canceled, /* Has the current job been canceled? */ DoBack; /* Enables the back channel comms */ int MemUsed = 0; //tracks memory use time_t TimeStart; //to record the start of a section FILE *PrintFile = NULL; //file descriptor for debug file FILE *UncompressedFile = NULL; //file descriptor for file of uncompressed page data time_t StartTime; time_t KeepAwakeStart; //for zlib z_stream strm; unsigned char out[CHUNK]; /*buffer for a compressed line */ #if DEBUGFILES == 1 FILE *dfp = NULL; //file descriptor for composite raster file FILE *Cyanfp = NULL; //file descriptor for cyan only raster file FILE *Magentafp = NULL; //file descriptor for magenta only raster file FILE *Yellowfp = NULL; //file descriptor for yellow only raster file FILE *Blackfp = NULL; //file descriptor for black only raster file FILE *RawColourFile = NULL; //file descriptor for input to dither FILE *DitheredColourFile = NULL; //file descriptor for output from dither #endif void SetupPrinter(cups_page_header2_t *header) { //gets the printer ready to start the job int i; for(i=0; i<4; ++i) { if(GoodExchange(PrintFile, "LockPrinterWait?", "0002, OK, Locked for printing;", DoBack, 1, 3.0) >= 0) break; } DoOutJob(PrintFile, "Event=StartOfJob;",0,0); //printer command if (DoBack) { GoodExchange(PrintFile, "DeviceStatus?", "0101,DeviceStatus.ImageDevice", DoBack, 1, 1.0); // you can get unexpected reply if there is an ink low warning then GoodExchange will be -ve //aquire ink levels here? DeviceStatus.Printer.InkLevelPercent.Colour=nn%&DeviceStatus.Printer.InkLevelPercent.Black=nn% //note & used as separator DoLog("ColourPercent=%d\n",ColourPercent,0); DoLog("BlackPercent=%d\n",BlackPercent,0); if(ColourPercent >= 0 && BlackPercent >= 0) { fprintf(stderr,"ATTR: marker-levels=%d,%d\n",BlackPercent,ColourPercent); // sets the levels displayed } } DoOutJob(PrintFile, KodakPaperSize,0,0); if(header->MediaPosition == 0) DoOutJob(PrintFile, "MediaInputTrayCheck=Main;",0,0); else if(header->MediaPosition == 1) DoOutJob(PrintFile, "MediaInputTrayCheck=Photo;",0,0); else { DoOutJob(PrintFile, "MediaInputTrayCheck=Main;",0,0); DoLog("Unknown Input Tray no. %d so used main tray", header->MediaPosition, 0); } if (DoBack) { GoodExchange(PrintFile, "MediaTypeStatus?", "MediaTypeStatus=custom-media-type-deviceunavailable", DoBack, 1, 1.0); GoodExchange(PrintFile, "MediaDetect?", "0098, OK, Media Detect Started;", DoBack, 1, 1.0); //do MediaTypeStatus? until some media is found typically takes 12 seconds for Hero 9.1 #if TESTING == 0 sleep(5); for(i=0; i<15; ++i) //normal #endif #if TESTING == 1 for(i=0; i<2; ++i) //short for tests #endif { DoLog("MediaTypeStatus? try %d\n", i, 0); if(GoodExchange(PrintFile, "MediaTypeStatus?", "MediaTypeStatus=custom-media-type-deviceunavailable", DoBack, 2, 2.0) <= 0) break; } } else { GoodExchange(PrintFile, "MediaDetect?", "0098, OK, Media Detect Started;", DoBack, 1, 1.0); sleep(12); } } void ShutdownPrinter(void) { int i, ret; DoOutJob(PrintFile, "Event=EndOfJob;",0,0); for(i=0; i<20; ++i) /* fast PC might need lots of tries here for printer to finish, how many is reasonable? */ { /* First few tries will be quick so small jobs finish quickly */ if(i<5) ret=GoodExchange(PrintFile, "UnlockPrinter?", "0003, OK, Printer unlocked;", DoBack, 1, 5.0); /* Then tries will be slower so long jobs can finish */ else ret=GoodExchange(PrintFile, "UnlockPrinter?", "0003, OK, Printer unlocked;", DoBack, 5, 2.0); DoLog("UnlockPrinter? try %d returned %d\n", i, ret); if(ret >= 0 || strcmp(BackBuf , "3405, Error, Printer not locked") == 0) break; //error string has no terminating ; because it has been tokenised } } void SetupJob(cups_page_header2_t *header) //Prepare the printer for printing a job. { DoOutJob(PrintFile, "OutputBin=MainSink;",0,0); Duplex = header->Duplex; if(Duplex == 0) DoOutJob(PrintFile, "Sides=OneSided;",0,0); else DoOutJob(PrintFile, "Sides=TwoSided;",0,0); //DoOutJob(PrintFile, "PageOrder=BackToFront;",0,0); //may be possible to implement this //DoOutJob(PrintFile, "Copies=1;",0,0); //may an error response? but is sent by windows DoOutJob(PrintFile, "MediaType=custom-media-type-autoselection-0-0-0-0;",0,0); DoOutJob(PrintFile, KodakPaperSize,0,0); } void FreeBuffers() { DoLog("Free buffers\n",0,0); free(CupsLineBuffer); free(DataLineBuffer); MemUsed = 0; DoLog("Buffers freed\n",0,0); } void AllocateBuffers(cups_page_header2_t *header) { // Allocate memory for a page of graphics... if ((CupsLineBuffer = malloc(header->cupsBytesPerLine)) == NULL) { DoLog("ERROR: Unable to allocate %d bytes for CupsLineBuffer!\n",header->cupsBytesPerLine,0); exit(1); } else MemUsed = MemUsed + header->cupsBytesPerLine * 1E-3; if ((DataLineBuffer = malloc(header->cupsBytesPerLine+12)) == NULL) { DoLog("ERROR: Unable to allocate %d bytes for DataLineBuffer!\n",header->cupsBytesPerLine+8,0); exit(1); } else MemUsed = MemUsed + (header->cupsBytesPerLine+12) * 1E-3; DoLog("Buffers allocated %d kb\n",MemUsed,0); } void StartPrinterPage(cups_page_header2_t *header) { int ResX, ResY; DisplayHeader(header); ResX = header->HWResolution[0]; ResY = header->HWResolution[1]; DoOutJob(PrintFile, "Event=StartOfPage;",0,0); DoOutJob(PrintFile, "Page=%d;",Page,0); DoOutJob(PrintFile, "Origin.Top=0.0mm;Origin.Left=0.0mm;",0,0); // DoOutJob(PrintFile, "Origin.Top=1.0mm;Origin.Left=1.0mm;",0,0); if(ResX==300) { DoOutJob(PrintFile, "PrintQuality=Draft;",0,0); } else if(ResX==600) { DoOutJob(PrintFile, "PrintQuality=Normal;",0,0); } else if(ResX==1200) // may not be an option { DoOutJob(PrintFile, "PrintQuality=High;",0,0); } if (header->cupsColorSpace == CUPS_CSPACE_CMY) { DoLog("CUPS_CSPACE_CMY (%d)\n",header->cupsColorSpace,0); DoOutJob(PrintFile, "PrintColorspace=Color;",0,0); DoOutJob(PrintFile, "AntiBleedControl=Auto;",0,0); DoOutJob(PrintFile, "Resolution=%dx%d;", ResX, ResY); DoOutJob(PrintFile, "RasterObject.BitsPerPixel=%d;",OutBitsPerPixel,0); DoOutJob(PrintFile, "RasterObject.Colorspace=sRGB;",0,0); } else if (header->cupsColorSpace == CUPS_CSPACE_K) { DoLog("CUPS_CSPACE_K (%d)\n",header->cupsColorSpace,0); DoOutJob(PrintFile, "PrintColorspace=Grayscale;",0,0); DoOutJob(PrintFile, "AntiBleedControl=Off;",0,0); DoOutJob(PrintFile, "Resolution=%dx%d;", ResX, ResY); DoOutJob(PrintFile, "RasterObject.BitsPerPixel=%d;",OutBitsPerPixel,0); DoOutJob(PrintFile, "RasterObject.Colorspace=Mono;",0,0); } else { DoLog("CUPS_CSPACE_?? (%d)\n",header->cupsColorSpace,0); } DoOutJob(PrintFile, "RasterObject.Compression=GZIPTok;",0,0); DoOutJob(PrintFile, "RasterObject.Width=%d;", header->cupsWidth,0); DoOutJob(PrintFile, "RasterObject.Height=%d;", header->cupsHeight,0); } void EndPage(void) //Finish a page of graphics. { DoOutJob(PrintFile, "Event=EndOfPage;", 0,0); if(PrintFile) fflush(PrintFile); FreeBuffers(); /* Free memory... allocated by AllocateBuffers() */ } void CancelJob(int sig) /* - Cancel the current job... I - Signal */ { (void)sig; DoLog("CancelJob: job cancelled by signal\n",0,0); CloseLogging(); Canceled = 1; } unsigned char Byte0(int In) { int Byte0Mask = 0xFF; return (In & Byte0Mask); } unsigned char Byte1(int In) { int Byte0Mask = 0xFF; return ((In>>8) & Byte0Mask); } int Composite(unsigned char Buffer[],int Posn) { //returns the sum of the 3 colour components corresponding to Posn, assuming chunked colour order return (Buffer[Posn*3]+Buffer[Posn*3+1]+Buffer[Posn*3+2]); } /* * 'main()' - Main entry and processing of driver. */ int /* O - Exit status */ main(int argc, char *argv[]) /* I - Number of command-line arguments, Command-line arguments */ { int fd; /* File descriptor */ cups_raster_t *ras; /* Raster stream from cups */ cups_page_header2_t header; /* Page header from cups */ int y, c; int i; int PixelsLeft,PixelsRight; //count blank pixels at right and left of raster line int PixelsNonBlank; //in a raster line int DataLength; //length of an uncompressed data line unsigned char MinOut=255, MaxOut=0; //to check the range of the dithered output or raster int CheckCount, ret, have, flush; FILE *CompData; //stores the compressed data of a page char RasFileName[100]=""; int BytesToPrint; int CurrentChunkSize; StartTime = time(NULL); KeepAwakeStart = time(NULL); #if defined(HAVE_SIGACTION) && !defined(HAVE_SIGSET) struct sigaction action; /* Actions for POSIX signals */ #endif /* HAVE_SIGACTION && !HAVE_SIGSET */ /* * Check command-line... */ if (argc < 6 || argc > 7) //wrong no of arguments { fprintf(stderr, ("Usage: %s job-id user title copies options [file]\n"), "rastertoek"); return (1); } char data; int datalen; cups_sc_bidi_t bidi; cups_sc_status_t status; /* Tell cupsSideChannelDoRequest() how big our buffer is... */ datalen = 1; /* Get the bidirectional capabilities, waiting for up to 1 second */ status = cupsSideChannelDoRequest(CUPS_SC_CMD_GET_BIDI, &data, &datalen, 1.0); /* Use the returned value if OK was returned and the length is still 1 */ if (status == CUPS_SC_STATUS_OK && datalen == 1) { bidi = (cups_sc_bidi_t) data; DoBack = (bidi == CUPS_SC_BIDI_NOT_SUPPORTED ? 0 : 1); } else { bidi = CUPS_SC_BIDI_NOT_SUPPORTED; DoBack = 0; } #if DEBUGFILES == 1 SetupLogging("c2espC",DoBack,"/tmp/KodakPrintLog"); #else SetupLogging("c2espC",DoBack,""); #endif setbuf(stderr, NULL); fprintf(stderr, ("DEBUG: ================= %s ===================================\n"),Version); DoLogString("Starting %s\n",Version); DoLog("Compiled with DEBUGFILES = %d, TESTING = %d\n", DEBUGFILES, TESTING); DoLog("Number of command line parameters: %d\n", argc, 0); int argi; for (argi = 0; argi < argc; argi++) { DoLogString(" param: '%s'\n", argv[argi]); } DoLogString("End of command-line parameters\n", ""); DoLogString("Bi-di/backchannel support: %s\n", (bidi == CUPS_SC_BIDI_NOT_SUPPORTED ? "false" : "true")); DoLog("DoBack value: %d\n", DoBack, 0); MarkerSetup(); /* * Open the page stream... */ if (argc == 7) { if ((fd = open(argv[6], O_RDONLY)) == -1) { fprintf(stderr, ("ERROR: c2espC: Unable to open raster file - %s\n"), strerror(errno)); sleep(1); return (1); } } else fd = 0; fprintf(stderr, ("DEBUG: c2espC: opening raster\n")); ras = cupsRasterOpen(fd, CUPS_RASTER_READ); /* * Register a signal handler to eject the current page if the * job is cancelled. */ Canceled = 0; #ifdef HAVE_SIGSET /* Use System V signals over POSIX to avoid bugs */ sigset(SIGTERM, CancelJob); #elif defined(HAVE_SIGACTION) memset(&action, 0, sizeof(action)); sigemptyset(&action.sa_mask); action.sa_handler = CancelJob; sigaction(SIGTERM, &action, NULL); #else signal(SIGTERM, CancelJob); #endif /* HAVE_SIGSET */ /* * Initialize the print device... */ #if DEBUGFILES == 1 PrintFile = fopen("/tmp/KodakPrintFile", "w");//open the print file sleep(3); //does this help chmod to work? chmod("/tmp/KodakPrintFile", S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it #endif /* read the first header */ if(cupsRasterReadHeader2(ras, &header)) { DoLog("First page Header read after %d sec\n", time(NULL)-StartTime,0); SetPaperSize(KodakPaperSize, header.PageSize[1]); SetupPrinter(&header); DoLog("Printer should be ready by now\n",0,0); /* * Process pages as needed... */ Page = 0; do //start of loop for each page { DoLog("Header read\n", 0,0); if (Canceled) break; if(header.cupsWidth<=0) break; Page ++; DoLog("PAGE %d COPIES %d\n", Page, header.NumCopies); /* * Start the page... */ if ( !(CompData=tmpfile()) ) { perror("opening compressed page temp file"); abort(); } OutBitsPerPixel = header.cupsBitsPerColor; if (header.cupsColorSpace == CUPS_CSPACE_CMY) //colour { DoLog("cupsColorSpace = %d = CUPS_CSPACE_CMY\n", header.cupsColorSpace, 0); fprintf(stderr, "INFO: c2espC: p%d Colour %d\n", Page, ColourPercent); sprintf(RasFileName,"/tmp/RasForComp.ppm"); } else if (header.cupsColorSpace == CUPS_CSPACE_K)//monochrome { DoLog("cupsColorSpace = %d = CUPS_CSPACE_K\n", header.cupsColorSpace, 0); fprintf(stderr, "INFO: c2espC: p%d Monochrome\n",Page); sprintf(RasFileName,"/tmp/RasForComp.pbm"); } else { DoLog("Unknown cupsColorSpace = %d\n", header.cupsColorSpace, 0); DoLog("Allowed cupsColorSpace = %d or %d\n", CUPS_CSPACE_CMY, CUPS_CSPACE_K); } DoLog("cups raster w = %d h = %d\n", header.cupsWidth, header.cupsHeight); DoLog("cups raster bytes per line = %d bits per line = %d\n", header.cupsBytesPerLine, header.cupsBytesPerLine * 8); #if DEBUGFILES == 1 //open raster file here fprintf(stderr, "INFO: c2espC: Opening %s\n",RasFileName); remove(RasFileName); dfp = fopen(RasFileName, "w"); UncompressedFile = fopen("/tmp/KodakUncompressed", "w"); //open the file sleep(3); //does this help chmod to work? chmod(RasFileName, S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it chmod("/tmp/KodakUncompressed", S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it if (dfp && header.cupsColorSpace == CUPS_CSPACE_CMY) { fprintf(dfp, "P6\n%8d %8d %8d\n", header.cupsWidth, header.cupsHeight, 255); } if (dfp && header.cupsColorSpace == CUPS_CSPACE_K) { fprintf(dfp, "P5\n%8d %8d %8d\n", header.cupsWidth, header.cupsHeight, 255); } #endif AllocateBuffers(&header); MinOut=255;MaxOut=0; //initialise if(Page == 1) SetupJob(&header); StartPrinterPage( &header); //prepare for compression DoLog("initialising Compression\n",0,0); /* allocate deflate state */ strm.zalloc = Z_NULL; strm.zfree = Z_NULL; strm.opaque = Z_NULL; ret = deflateInit(&strm, Z_DEFAULT_COMPRESSION); if (ret != Z_OK) { //was return ret; DoLog("Deflate did not initialise properly\n", 0, 0); } for (y = 0; (y < header.cupsHeight); ++y ) // Loop for each line of the page { if (Canceled) break; /* Keep the printer connection awake, added if (DoBack) 15/1/12 */ if (DoBack) KeepAwakeStart = KeepAwake(KeepAwakeStart,10, PrintFile); //read a line if (!cupsRasterReadPixels(ras, CupsLineBuffer, header.cupsBytesPerLine)) break; //check for max and min either colour or mono for(i=0;i<(header.cupsBytesPerLine);++i) { if (CupsLineBuffer[i]>MaxOut) MaxOut=CupsLineBuffer[i]; if (CupsLineBuffer[i]0) //there are some RHS blanks { DataLineBuffer[DataLength+0]=Byte0(PixelsRight); DataLineBuffer[DataLength+1]=Byte1(PixelsRight); DataLineBuffer[DataLength+2]=0x01; DataLineBuffer[DataLength+3]=0x00; DataLength+=4; } } if(UncompressedFile) fwrite(DataLineBuffer, 1, DataLength, UncompressedFile); //send data to the compression strm.next_in = DataLineBuffer; strm.avail_in = DataLength; if(y >= header.cupsHeight-1) flush=Z_FINISH; else flush = Z_NO_FLUSH; /* run deflate() on input until output buffer not full */ do { strm.avail_out = CHUNK; strm.next_out = out; // DoLog("deflating %d byte input\n",strm.avail_in,0); ret = deflate(&strm, flush); if(ret == Z_STREAM_ERROR) break; have = CHUNK - strm.avail_out; if(have>0) DoLog("writing deflated output %d bytes\n",have,0); if (fwrite(out, 1, have, CompData) != have || ferror(CompData)) { (void)deflateEnd(&strm); ret = Z_STREAM_ERROR; //kludge break; } } while (strm.avail_out == 0); if(ret == Z_STREAM_ERROR) break; #if DEBUGFILES == 1 //store the raster for debugging - may need changing for colour if (dfp) fwrite(CupsLineBuffer, 1, header.cupsBytesPerLine, dfp); #endif } //end of line loop if(ret == Z_STREAM_ERROR) { DoLog("Compression error no %d\n",Z_ERRNO,0); } /* end of compression */ //put compressed byte count into output file and copy compressed data in (void)deflateEnd(&strm); DoLog("Compression finished\n",0,0); DoLog("Rewinding compressed page file\n",0,0); rewind(CompData); /* Old version sent data all in one go. This seems to cause a problem with smb shared printers. DoOutJob(PrintFile, "RasterObject.Data#%d=", strm.total_out,0); CheckCount=0; while((c=fgetc(CompData)) != EOF) { #if DEBUGFILES == 1 fputc(c,PrintFile); #endif #if TESTING == 0 fputc(c,stdout); #endif ++CheckCount; } DoOutJob(PrintFile, ";",0,0); //one semi colon after the data fflush(PrintFile); */ // New version with chunk size limit 15/1/12 CheckCount=0; BytesToPrint = strm.total_out; CurrentChunkSize = 0; while (BytesToPrint > 0) { if (BytesToPrint <= MAXDATACHUNK) { CurrentChunkSize = BytesToPrint; } else { CurrentChunkSize = MAXDATACHUNK; } //send one chunk of data DoOutJob(PrintFile, "RasterObject.Data#%d=", CurrentChunkSize,0); //if(cbarg != NULL) rc = fwrite(CurrentChunkStart, 1, CurrentChunkSize, cbarg); DoLog("GZIP data chunk is sent to printer\n",0,0); //rc = fwrite(CurrentChunkStart, 1, CurrentChunkSize, stdout); //also to output for(i=0;i 0) ShutdownPrinter(); /* * Close the raster stream... */ cupsRasterClose(ras); DoLog("cups raster closed after %d sec\n",time(NULL)-StartTime,0); if (fd != 0) close(fd); /* * Termination, send an error message if required... */ DoLog("c2espC terminating after %d sec. Processed %d pages\n",time(NULL)-StartTime,Page); if (Page == 0) { DoLog("ERROR: c2espC: No pages found!\n",0,0); return (1); } else { CloseLogging(); if(PrintFile != NULL) fclose(PrintFile); #if DEBUGFILES == 1 //let anyone read the files How much delay is needed if any? // sleep(3); //does this help chmod to work? chmod("/tmp/KodakCompPage", S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it chmod("/tmp/KodakPrintLog", S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it chmod("/tmp/KodakPrintFile", S_IRUSR | S_IWUSR | S_IROTH ); //let anyone read it #endif //cups seems to replace this by "Ready to print" so you don't see it //fprintf(stderr, "INFO: Done - Blk %d Col %d percent\n",BlackPercent, ColourPercent); fprintf(stderr, "INFO: Done\n"); return (0); } } c2esp-27/src/KodakESP_C_07.drv0000644000175000017500000002145412254021352012720 00000000000000// // // Driver info file for PPDs. For ESP Cxxx series and for Hero series // // 1 dec 2013: ShortNickName added to stop ppdc warnings. // NickName and ShortNickName changed to ModelName to help Ubuntu auto identify printers. // It seems that the ShortNickName is used to build the database for system-config-printer? // But if there is no ShortNickName, NickName is used instead? // The first word of ShortNickName gets used for the maker in the database? // ppdc still gives warnings when short nickname is >31 chars (ESP41 and ESP61) // but it still builds the ppd files. I have not found a work around for this. // Include necessary files... #include #include // Common stuff for all drivers... Attribute "cupsVersion" "" "1.4" Attribute "FileSystem" "" "False" Attribute "LandscapeOrientation" "" "Plus90" Attribute "TTRasterizer" "" "Type42" Copyright "Copyright 2011-2013 by Paul Newall" Font * Version "1.6" // Kodak { Manufacturer "Eastman Kodak Company" //was Eastman Kodak DriverType custom ManualCopies Yes ColorDevice Yes Throughput 8 Attribute "cupsSNMPSupplies" "" "False" // hope to stop the "may not be connected" message VariablePaperSize Yes MinSize 36 36 MaxSize 1080 86400 Filter application/vnd.cups-raster 50 /usr/lib/cups/filter/c2espC Filter application/vnd.cups-command 50 /usr/lib/cups/filter/command2esp Attribute "cupsCommands" "" "Clean PrintSelfTestPage PrintAlignmentPage ReportLevels" ColorDevice Yes Attribute DefaultColorSpace "" "CMY" // HWMargins 14.03 14.25 14.03 14.25 //5mm all round HWMargins 3 3 3 3 //1mm all round // option "MediaSize" PickOne AnySetup 30 MediaSize Executive MediaSize Letter MediaSize Legal *MediaSize A4 MediaSize A5 MediaSize A6 MediaSize 8x10 MediaSize Photo4x6 MediaSize EnvISOB5 MediaSize EnvC5 MediaSize EnvDL MediaSize Env10 option "Resolution" PickOne AnySetup 20 Choice 300x300dpi/300x300 "<>setpagedevice" *Choice 600x600dpi/600x600 "<>setpagedevice" //res/media dens gamma 3x3matrix ColorProfile 300x300dpi/- 1.0 1.0 1.0 0.0 0.0 0.0 1.0 0.0 0.0 0.0 1.0 ColorProfile 600x600dpi/- 1.0 1.0 //gamma 1.5 to 1.7 was good for dithered in ESP5250 1.0 0.0 0.0 0.0 1.0 0.0 0.0 0.0 1.0 Attribute "marker-colors" "" "black magenta" option "ColorModel" PickOne AnySetup 10 //ColorModel name colorspace colororder compression // Choice CMY/Color "<>setpagedevice" // *Choice Gray/BlackAndWhite "<>setpagedevice" ColorModel Gray/Grayscale k chunky 0 *ColorModel CMY/Color cmy chunky 0 // Kodak ESP C110 Series without duplex or photo tray { ModelName "Kodak ESP C110 Series AiO" Attribute NickName "" "Kodak ESP C110 Series AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "Kodak ESP C110 Series AiO" Attribute Product "" "(Kodak ESP C110 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP C110 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_C11x_Series.ppd" PCFileName "KESPC11x.ppd" ModelNumber C110 } // Kodak ESP C310 Series without duplex or photo tray { ModelName "Kodak ESP C310 Series AiO" Attribute NickName "" "Kodak ESP C310 Series AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "Kodak ESP C310 Series AiO" Attribute Product "" "(Kodak ESP C310 Series AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP C310 Series AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_C31x_Series.ppd" PCFileName "KESPC31x.ppd" ModelNumber C310 } // Kodak ESP Hero Series without duplex or photo tray { ModelName "KODAK HERO 3.1 AiO" Attribute NickName "" "KODAK HERO 3.1 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK HERO 3.1 AiO" Attribute Product "" "(KODAK HERO 3.1 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK HERO 3.1 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_Hero_3.1.ppd" PCFileName "KHERO31.ppd" ModelNumber Hero3.1 } // Kodak ESP Hero Series with duplex and without photo tray { ModelName "KODAK HERO 5.1 AiO" Attribute NickName "" "KODAK HERO 5.1 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK HERO 5.1 AiO" Attribute Product "" "(KODAK HERO 5.1 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK HERO 5.1 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_Hero_5.1.ppd" PCFileName "KHERO51.ppd" ModelNumber Hero5.1 Duplex rotated } // Kodak ESP Hero Series with duplex and photo tray. 6.1, 7.1, 9.1 { ModelName "KODAK HERO 6.1 AiO" Attribute NickName "" "KODAK HERO 6.1 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK HERO 6.1 AiO" Attribute Product "" "(KODAK HERO 6.1 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK HERO 6.1 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_Hero_6.1.ppd" PCFileName "KHERO61.ppd" ModelNumber Hero6.1 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP Hero Series with duplex and photo tray. 6.1, 7.1, 9.1 { ModelName "KODAK HERO 7.1 AiO" Attribute NickName "" "KODAK HERO 7.1 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK HERO 7.1 AiO" Attribute Product "" "(KODAK HERO 7.1 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK HERO 7.1 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_Hero_7.1.ppd" PCFileName "KHERO71.ppd" ModelNumber Hero9.1 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP Hero Series with duplex and photo tray. 6.1, 7.1, 9.1 { ModelName "KODAK HERO 9.1 AiO" Attribute NickName "" "KODAK HERO 9.1 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK HERO 9.1 AiO" Attribute Product "" "(KODAK HERO 9.1 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK HERO 9.1 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_Hero_9.1.ppd" PCFileName "KHERO91.ppd" ModelNumber Hero9.1 Duplex rotated InputSlot 0 MainTray InputSlot 1 PhotoTray } // Kodak ESP Series without duplex or photo tray { ModelName "KODAK ESP 1.2 AiO" Attribute NickName "" "KODAK ESP 1.2 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK ESP 1.2 AiO" Attribute Product "" "(KODAK ESP 1.2 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 1.2 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_1.2.ppd" PCFileName "KESP12.ppd" ModelNumber ESP1.2 } // Kodak ESP Series without photo tray with duplex { ModelName "KODAK ESP 2.2 AiO" Attribute NickName "" "KODAK ESP 2.2 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK ESP 2.2 AiO" Attribute Product "" "(KODAK ESP 2.2 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 2.2 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_2.2.ppd" PCFileName "KESP22.ppd" ModelNumber ESP2.2 } // Kodak ESP Series without duplex or photo tray { ModelName "KODAK ESP 3.2 AiO" Attribute NickName "" "KODAK ESP 3.2 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK ESP 3.2 AiO" Attribute Product "" "(KODAK ESP 3.2 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 3.2 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_3.2.ppd" PCFileName "KESP32.ppd" ModelNumber ESP3.2 } // Kodak ESP Series without photo tray with duplex { ModelName "KODAK ESP 4.2 AiO" Attribute NickName "" "KODAK ESP 4.2 AiO" //The NickName is used in ubuntu to make the printer database Attribute ShortNickName "" "KODAK ESP 4.2 AiO" Attribute Product "" "(KODAK ESP 4.2 AiO)" Attribute 1284DeviceID "" "MFG:Eastman Kodak Company;MDL:KODAK ESP 4.2 AiO;CMD:OPL V1.00;CLS:PRINTER;DES:AIO;VER:1.00;" FileName "Kodak_ESP_4.2.ppd" PCFileName "KESP42.ppd" ModelNumber ESP4.2 } } c2esp-27/src/c2espcommon.h0000644000175000017500000000566412262021401012427 00000000000000/* * * Kodak ESP Cxxx (OPL?) Control Language filters for the Common UNIX * Printing System (CUPS). * common functions for c2esp, c2espC filters header file * * copyright Paul Newall May 2010 - Jan 2014. VERSION 3 (first used in c2esp26) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include //FlushBackChannel, and the side channel functions and constants #include //files #include //time functions used for debugging /* * Constants... */ #define DEBUGFILES 0 /* DEBUGFILES 1 creates files in /tmp to help debug */ #define TESTING 0 /* TESTING 1 suppresses the output to the printer */ #define ESC 255 #define NL 10 /* * Globals... */ char BackBuf[32000]; //for the back channel replies from the printer int ColourPercent, BlackPercent; //to store the detected marker levels time_t KeepAwake(time_t Start, int Interval, FILE *PrintFile); void SetupLogging(char *ExtCallerName, int ExtDoBack, char *ExtLogFileName); void CloseLogging(); void DoLog(char *PrintFormat, int I1, int I2); //prints a line with 2 integers to the log file and the cups error log void DoLogString(char *PrintFormat, char *String); //prints a line with a string to the log file and the cups error log /* DoOutJob used to enable one call to send to the specified job file and to stdout (if not testing) And log the result */ void DoOutJob(FILE *OutFile, char *PrintFormat, int I1, int I2); /* FlushBackChannel gets rid of any previous reply that could cause confusion */ int FlushBackChannel(char *IdString, float DrainTime); //returns 1 if sucessful /* GoodExchange sends a command gets reply from the printer on the back channel and compares it with the expected reply It returns the number of bytes read if the reply was the one expected, otherwise -(the number of bytes read) if the reply did not match Expect, or 0 if there was no reply */ int GoodExchange(FILE *PrintFile, char *Command, char *Expect, int DoBack, unsigned int SleepTime, float ReplyTime); int MarkerPercent(char *Buf, int GetColour); /* GetColour = 1 for "Color" or 0 for "Black" */ void MarkerSetup(); void SetPaperSize(char Size[], int PaperPoints); //converts length of page in cups header (in points) into a string that the printer recognises void DisplayHeader(cups_page_header2_t *header); /* * Show page device dictionary in stderr and LogFile */ int HeaderInvalid(cups_page_header2_t *header); /* checks the header has sensible values and returns 1 if they are not sensible */ c2esp-27/scripts/0000755000175000017500000000000012271222572011012 500000000000000c2esp-27/scripts/c2esplog0000644000175000017500000000025011744357062012377 00000000000000#!/bin/sh # script for c2esp, extracts c2esp entries from the cups error log # This is just a time saver for developers / debuggers grep c2esp /var/log/cups/error_log c2esp-27/scripts/Makefile.in0000644000175000017500000003303012262021560012770 00000000000000# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = scripts DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(bindir)" SCRIPTS = $(bin_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ HAVE_CUPSCONFIG = @HAVE_CUPSCONFIG@ HAVE_PPDC = @HAVE_PPDC@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ cupsdatadir = @cupsdatadir@ cupsfilterdir = @cupsfilterdir@ cupsversion = @cupsversion@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ ppdlist = @ppdlist@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ bin_SCRIPTS = c2esplog EXTRA_DIST = c2esplog all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu scripts/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu scripts/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(SCRIPTS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binSCRIPTS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binSCRIPTS .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ctags-am distclean distclean-generic distdir dvi dvi-am html \ html-am info info-am install install-am install-binSCRIPTS \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags-am uninstall uninstall-am \ uninstall-binSCRIPTS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: c2esp-27/scripts/Makefile.am0000644000175000017500000000005412260552203012760 00000000000000bin_SCRIPTS = c2esplog EXTRA_DIST = c2esplogc2esp-27/Makefile.in0000644000175000017500000005643712262021560011321 00000000000000# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ HAVE_CUPSCONFIG = @HAVE_CUPSCONFIG@ HAVE_PPDC = @HAVE_PPDC@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ cupsdatadir = @cupsdatadir@ cupsfilterdir = @cupsfilterdir@ cupsversion = @cupsversion@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ ppdlist = @ppdlist@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign SUBDIRS = src doc scripts ppd all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then rm -f stamp-h1; else :; fi @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: c2esp-27/install-sh0000755000175000017500000003325512204342713011253 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: c2esp-27/Makefile.am0000644000175000017500000000007112260565204011275 00000000000000AUTOMAKE_OPTIONS = foreign SUBDIRS = src doc scripts ppd c2esp-27/aclocal.m40000644000175000017500000011164212262021555011106 00000000000000# generated automatically by aclocal 1.13.3 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.13' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.13.3], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.13.3])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR c2esp-27/depcomp0000755000175000017500000005601612204342713010624 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: c2esp-27/missing0000755000175000017500000001533112204342713010641 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2012-06-26.16; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'automa4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: c2esp-27/doc/0000755000175000017500000000000012271222572010070 500000000000000c2esp-27/doc/README0000644000175000017500000003515112262044307010673 00000000000000Readme file for Kodak ESP series and Hero series cups driver. ============================================================= Please read the "INSTALL" file to see how to install this software. VERSION NOTES Version 2.7 - As 2.6 but with ppd entries for ESP 1.2 and ESP 3.2. The drv files are now installed instead of the ppd files. The jbig library is no longer shipped with c2esp. ShortNickName added to the drv files to pass more ppdc tests. The compile and install system has been changed to autoconf/automake. Version 2.6 - As 2.5c but with a modified makefile so it will build with cups 1.5.x or 1.6.x Also a few more ppd files. Version 2.5c - As 2.5b but with patch from awl29 applied and some other mods. The problems with AIO 5100 5300 5500 seem to actually have been problems with cups caused by errors in the ppd files. Now these errors are fixed, so we expect to no longer have these problems. Reports of testing would be helpful. Version 2.5b - As 2.5a but the DEBUGFILES and TESTING option system tidied up. Set these options in c2espcommon.h - Added a test of the raster header. If the resolution values are not sensible, no data will be sent to the printer. THIS SHOULD MAKE TESTING THE AIO 5100 5300 5500 SAFER. Version 2.5a - IT SEEMS THAT THIS VERSION MAY NOT WORK WITH THE AIO 5100 5300 5500 PRINTERS - As 2.5 but the data chunk size limit was reinstated. Version 2.5 - IT SEEMS THAT THIS VERSION MAY NOT WORK WITH THE AIO 5100 5300 5500 PRINTERS - The c2esp filter for the ESP series has been significantly rewritten to enable some ppd attributes like cupsInkLimit and cupsBlackGeneration. - The grey ink is now used. This makes grey areas properly grey (less green than they used to be). - Because of the grey ink and cupsInkLimit, ink cartridges should last longer. - The Black&White option is now dithered properly (and also uses the grey ink). - The data chunk size limit was unintentionally left out. Version 2.4 - patch from user awl29 applied to fix problems with non bi-directional printers, smb shared - data chunk size limit applied in c2espC, some printers can't handle large data chunks. Version 2.3 - ppd files for the hero series had printer model names and 1284DeviceID changed to enable system-config-printer to find the correct ppd automatically. The ESP xxxx series also install automatically. I do not know the 1284DeviceID for the ESP Cxxx series yet. - This version will be released also as a .deb file. It should work pretty well for all 3 series (ESP xxxx, ESP Cxxx, Hero) Version 2.2 - A few bugs fixed. ppd files were not showing color options correctly. Some attempts made to speed up printing by removing unnecessary delays. Version 2.2~rc1 - I now have a Hero 9.1 printer, so I can test the c2espC filter. This version should now work in b/w and colour 300 and 600dpi on the Cxxx series and the Hero series. - More ppd files to match the different printers. More paper sizes added to the ppds and filters. - The duplex and photo paper tray on the Hero series (and perhaps others like ESP 7250?) should now work. - Added "make ppd" to the make file to generate the ppd files from the *.drv files using ppdc if you have it installed. Though the ppd files are already included in the source, so you only need this if you modify them. Version 2.1 - as 2.1~rc3 Making deb file too. Version 2.1~rc3 - significant changes from rc2. Some functions common to c2esp and c2espC are now in a common library (c2espcommon.c). The log entries have been made more detailed and neater. In c2espC the temporary file for holding the compressed data is now a system named file that should not persist after c2espC terminates. - c2espC filter (for the C series) now attempts to handle greyscale or colour at 300dpi or 600dpi, but I have no Cxxx printer so I cannot test it fully. - a script now called c2esplog is provided to extract entries for c2esp or c2espC from the cups error log. Type cupslog in terminal to see the log entries, or cupslog >yourfilename to save in a file. Version 2.1~rc2 - c2espC filter (for the C series) now attempts to handle greyscale or colour at 300dpi or 600dpi. Several bugs have been fixed, but I have no Cxxx printer so I cannot test it fully. - a script called cupslog is provided to extract entries for c2esp or c2espC from the cups error log. Type cupslog in terminal to see the log entries, or cupslog >yourfilename to save in a file. Version 2.1~rc1 - c2espC filter (for the C series) now attempts to handle greyscale or colour at 300dpi or 600dpi - sudo make forceppd Will attempt to update the ppds of existing queues Version 2.0a - Bugs in c2espC filter (for the C series) fixed to allow it to handle more than 1 page. black and white draft only in this version. myopldecode tidied up and bug fixed. Version 2.0 - The makefile now echoes the ppd files to verify which ones are intalled. Unused stuff removed from the makefile. c2espC filter added for the C series. black and white draft only in this version - But since I don't have one of these printers to test I'd be surprised if it actually prints anything without some more development. Version 1.9 - This is functionally the same as 1.8, but various mods were made to reduce security risks (debug files are no longer created in /tmp unless you modify the makefile to require them). The debug tool myopldecode is no longer installed unless you modify the makefile to require it. Version 1.8 - There is now a command filter. It is possible to refresh the ink level display before printing. Also possible to print the printers own self test page, and do a head clean from printer manager. Printing an alinment page should also be possible but there seems to be no button for that in printer manager. - The ppd files have been reorganised. Now there is one for each model. If you have too many old files do a "sudo make uninstall" before doing "sudo make install" to remove the old files. There is no longer a special dither version of each ppd file, instead there are two colour options: "colour dither" and "colour nondither". dither is recommended, use nondither if you need something faster. Models 3200 and 5200 do not have the duplex option, 6100 and higher have the duplex option. Version 1.7 - "INFO:" in stderr seems to be displayed again in printer manager in Ubuntu 10.10 . Maybe this was a bug in printer manager or cups that has been fixed? - Ink levels (marker levels) are now communicated to cups - A bug introduced in ver 1.4 where the compressed data was not closed off properly now appears to be fixed. This caused the printer to stall mid page when printing some files. Version 1.6 - Minor changes to /tmp/KodakPrintLog eg Message when c2esp finishes to say how many pages were processed. - When c2esp is ready to finish the timeout for the PrinterUnlock? command was increased. This should fix a problem where c2esp was finishing a multipage job before the printer had finished printing, then the printer timed out and did not print the end of the job. - NB the messages added in version 1.4 ("INFO" in stderr) no longer seem to be displayed in printer manager in Ubuntu 10.10 Version 1.5 - Only about 1/10 of a page is stored in memory now, so the memory requirements are reduced. (Ghostscript will still use quite a lot of memory) - Some redundant program lines that caused run time errors for some users have been deleted. Version 1.4 - ppd files changed: gamma =1.5 to try and make colours better (but it's starting to depend on taste now). You need to reselect "drivers" in cups to select the new ppds. - data is now sent to the printer as soon as possible, which is more reassuring since printing starts sooner. - in the printer configuration window, you can see more messages showing progress of the print job. Version 1.3 - Bug that stopped printing on 6 x 4 paper fixed. - 600x1200 dpi is now processed with dithering which makes the dot pattern much smoother. (And makes printing slower). - You can print without dithering, like ver 1.2 or less, by using the non-dither ppd files. (there are now 4 ppd files: duplex/non-duplex and dither/non-dither). - Colour maps have been changed to try and improve the "red prints as orange" problem. - This version is a bit slow and clunky. The data is saved in a temporary file and then sent to the printer (easier for debugging) - The makefile has been modified (-lcups added) to try and improve linking in Fedora. - HW margins have been reduced to 1mm because some printed pages were being cropped by the 5mm margins. - When printing documents that involve large amounts of print data the printer appeared to disconnect from the driver during processing. Extra commands are now sent to try and fix this. Version 1.2 - bug that stopped black printing 0.75 inches from RH edge of letter paper using 600dpi and colour fixed Version 1.1 - duplex option now has a separate ppd file. - model 5200 has no duplex option - model 5500 has duplex - NB using the duplex option with a non duplex printer may cause a paper jam Version 1.0 - duplex option modified. NB using the duplex option with a non duplex printer may cause a paper jam Version 0.9 - makefile has -lcupsimage instead of /usr/lib/libcupsimage.so.2 (intention: to make sucessfully in non ubuntu distros) - duplex option added - but did not work Version 0.8 - makefile simplified and modified to suit making deb package Version 0.7 - bug fixed: when cupsBackChannelRead returned -1 we got a segmentation error. Version 0.6 - the *.~ files are now removed by make clean - some redundant includes removed Version 0.5 - As V 0.4 except the source for the ppd file KodakESP_05.drv is now supplied. Version 0.4 - myopldecode tidied up to stop some compilation warnings. - draft mode (300x1200) added, should use less ink. - Memory use reduced, now 500Mb for A4 colour with normal (600x1200) resolution - Detailed step by step installation notes in INSTALL file for ubuntu. - It has been tested with Kodak ESP 5250 and ESP 3250 all in one printers, just for printing in colour and black and white (no scanning), using the wireless network connection and the USB connection. - If you test it on another ESP printer it would be very nice to know if it worked or not (please use the forum on sourceforge to tell me) - It has been tested on 32 bit Ubuntu 9.10. and on Fedora - Printing from gedit (or other text editor that does not divide the text into pages) may not work properly when the output needs more than 1 page. - The colour balance in pictures may not be very good. I have spent no time fine tuning it. - You need to have CUPS installed. Version 0.3 - It has only been tested with a Kodak ESP 5250 all in one printer, just for printing in colour and black and white (no scanning), using the wireless network connection and the USB connection. - If you test it on another ESP printer it would be very nice to know if it worked or not (use the forum on sourceforge) - It has only been tested on 32 bit Ubuntu 9.10. - Memory use is high >2Gb total of actual memory + swap when colour printing A4 or letter size. Perhaps this is normal for CUPS raster printing? I don't know. - Printing from gedit (or other text editor that does not divide the text into pages) may not work properly when the output needs more than 1 page. - The colour balance in pictures may not be very good. I have spent no time fine tuning it. - Some suplus stuff removed (foomatic db files). - Some extra dependency tests added to makefile - to check the CUPS libraries are there. - You need to have CUPS installed. Version 0.2 - It has only been tested with a Kodak ESP 5250 all in one printer, just for printing in colour and black and white (no scanning), using the wireless network connection and the USB connection. - If you test it on another ESP printer it would be very nice to know if it worked or not (use the forum on sourceforge) - It has only been tested on 32 bit Ubuntu 9.10. - Memory use is high >2Gb total of actual memory + swap when colour printing A4 or letter size. Perhaps this is normal for CUPS raster printing? I don't know. - Printing from gedit (or other text editor that does not divide the text into pages) may not work properly when the output needs more than 1 page. - The colour balance in pictures may not be very good. I have spent no time fine tuning it. - The user interface in the ppd file has been tidied up. Version 0.1 This is the first release. - It has only been tested with a Kodak ESP 5250 all in one printer, just for printing in colour and black and white (no scanning), using the wireless network connection. - It has only been tested on 32 bit Ubuntu 9.10. - Memory use is high >2Gb total of actual memory + swap when colour printing A4 or letter size. Perhaps this is normal for CUPS raster printing? I don't know. - Printing from gedit (or other text editor that does not divide the text into pages) may not work properly when the output needs more than 1 page. - The colour balance in pictures may not be very good. I have spent no time fine tuning it. AUTHORS The majority of the code in the filter written by Paul Newall. The general structure of the filter is based on the rastertohp filter supplied with cups. The JBIG compression system is pretty much the system from foo2lava by Rick Richardson, and Rick via foo2lava made a big contribution to my understanding of how to write a filter. The JBIG compression itself is done by Markus Kuhn's JBIG-KIT compression library (included, but available at http://www.cl.cam.ac.uk/~mgk25/jbigkit/), I hope I have acknowledged other's contributions appropriately. This is the first time I have released anything under the GPL. LICENSE This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. PATENTS It is possible that certain products which can be built using the jbig software module might form inventions protected by patent rights in some countries (e.g., by patents about arithmetic coding algorithms owned by IBM and AT&T in the USA). Provision of this software by the author does NOT include any licences for any patents. In those countries where a patent licence is required for certain applications of this software module, you will have to obtain such a licence yourself. c2esp-27/doc/Makefile.in0000644000175000017500000003167412262021560012062 00000000000000# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ #Where does debian normally put the docs in share/cups/doc/c2esp, or share/doc/c2esp ? VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = doc DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am COPYING \ INSTALL README ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(docdir)" DATA = $(doc_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ HAVE_CUPSCONFIG = @HAVE_CUPSCONFIG@ HAVE_PPDC = @HAVE_PPDC@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ cupsdatadir = @cupsdatadir@ cupsfilterdir = @cupsfilterdir@ cupsversion = @cupsversion@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = $(cupsdatadir)/doc/@PACKAGE@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ ppdlist = @ppdlist@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ doc_DATA = README INSTALL all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-docDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-docDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ctags-am distclean distclean-generic distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-docDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags-am uninstall uninstall-am \ uninstall-docDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: c2esp-27/doc/Makefile.am0000644000175000017500000000023012256147546012051 00000000000000#Where does debian normally put the docs in share/cups/doc/c2esp, or share/doc/c2esp ? docdir = $(cupsdatadir)/doc/@PACKAGE@ doc_DATA = README INSTALL c2esp-27/doc/COPYING0000644000175000017500000004322412246674042011055 00000000000000 ----------------------------------------------------------------------------- GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. c2esp-27/doc/INSTALL0000644000175000017500000002103312262045362011040 00000000000000INSTALLATION ------------ (Debian and ubuntu now have packages in repositories you can install) There may be a more recent version available as a .deb file on sourceforge. There may be a more recent source code version available as a .tar.gz file on sourceforge. The general procedure will be like this if you compile from source. (see below for details for different distros): Download: You download the compressed archive file Unpack: You uncompress the archive to get several files required to install the driver. (This is one of those files, so you have probably done that already) (Optional) Install packages needed for this driver to work: You may need to install some packages before you can install the driver. Most distros have some package manager that you use to do this. (Optional) Uninstall: If you have already installed a previous version of this driver, it might be helpful to uninstall it. If not, ignore this step. Configure: Check details of the system and change the install process to suit. Configuring will be done by a command like "./configure" Compile: You need to convert the program, written in c, into something your computer can run. Compiling will be done by a command like "make" Install driver, PPD files, and extra files: Various files need to be copied to folders where the system can find them. This will be done with a command like "make install" Create printers: This is where you tell cups about the new printer. Then it should be possible to print. Detailed versions follow for different distros: UBUNTU NOTES ------------ (in the following NN in the filename c2espNN means the 2 digits of the release no) (so for release 0.4, you would type c2esp04 ) Download: You download the compressed archive file from http://sourceforge.net/projects/cupsdriverkodak/ It is usually convenient to store the dowloaded file in your home directory. Unpack: You uncompress the archive to get several files required to install the driver. If you double click on the dowloaded .tar.gz file, the archive manager should open. Use the extract button to extract files from the archive. The goal is to get a folder called something like c2esp04 (the last 2 digits depend on the version of the driver)in some place you specify, for example in your home folder. This folder should contain the files in the archive. (Optional) Install packages needed for this driver to work: You may need to install some packages if you do not already have them, before you can install the driver. I'm assuming you know how to do that (with synaptic package manager). You will need the following: build-essential cups libcups2-dev libcupsimage2-dev libcupsdriver1-dev For cups versions 1.6 or later the cups dependencies may be different You need to open a terminal for the following steps: ctrl-alt-t will start terminal When the terminal starts you will be in your home folder. You need to navigate to the folder where you unpacked the driver. (in the following NN in the filename c2espNN means the 2 digits of the release no) (so for release 0.4, you would type c2esp04 ) For example (in this example "$" represents the prompt, you type what follows the $: $ cd c2espNN (Optional) Uninstall: If you have already installed a previous version of this driver, it might be helpful to uninstall it. If not, ignore this step. To uninstall, you type: $ sudo make uninstall The sudo indicates that you want to do some kind of system modification that you would normally be prevented from doing. So you get asked for the password the first time you use sudo. Configure: To configure, you type: $ ./configure You may get messages suggesting you need to install some package (see the (Optional) Install packages section above) You may get some warnings, you can probably ignore those. Compile: You need to convert the program, written in c, into something your computer can run. To compile, you type: $ make You may get messages suggesting you need to install some package (see the (Optional) Install packages section above) You may get some warnings, you can probably ignore those. You may get some error messages, if so it's unlikely you can continue. Install driver, PPD files, and extra files: Various files need to be copied to folders where the system can find them. To install, you type: $ sudo make install The sudo indicates that you want to do some kind of system modification that you would normally be prevented from doing. So you get asked for the password the first time you use sudo. Create printers: This is where you tell cups about the new printer. Turn the printer on. (in ubuntu 10.xx) Menu: System/Administration/Printing A printer configuration window should open. Click the "new" button, and wait while the system searches for printers, you should get a "Select device" window. Navigate to the printer (network printer or USB printer). I find I have to wait for several seconds after clicking on a network printer for it to be highlighted. If you are setting up a new version of c2esp, you may have more than one version of the printer to choose from. From c2esp11 and later there is more than one ppd file: model 5200 has no duplex, model 5500 has duplex. From c2esp13 and later there are 4 ppd files 5200 non duplex / 5500 duplex, dithered / non dithered Select the file that best matches your printer model. Dithered is better quality, uses more memory and is slower. From c2esp18 and later there is one ppd per printer model. Dithered/non dithered are choices in the colour options. Click "Forward" and wait again for the "Describe printer" window. Change the names if you wish, and click the "Apply" button. Print test page if you wish, but you might do this first: If you right click the newly created printer in the printer configuration window, you can set up some default properties like: Colour or b/w, resolution, paper size etc. (under printer options) I generally make 2 printers, one colour and one b/w. But that's not essential. Also in the printer configuration window, you can see some messages showing progress of the print job. (in ubuntu 11.0x) I think you need to use the web interface for cups, point web browser to http://localhost:631/admin Then follow a similar sequence to above to create a printer queue. Now there is a script to try and update ppds of existing print queues, if you are updating c2esp $ sudo make forceppd (in ubuntu 11.10 and later) c2esp is included in this disto, so the printer should just work (you may need to create print queue as described for ubuntu 11.0x Then it should be possible for you to print. SIXTY FOUR BIT ------ There are three ways that I know to install in 64 bit. 1. This way is potentially the easiest, I have not tested it: jolting, made a repository from version c2esp08 Install it like this in terminal: sudo add-apt-repository ppa:jolting/cupsdriverkodak sudo apt-get update sudo apt-get install c2esp 2. You download the latest tar file (currently c2esp26) and extract it somewhere convenient for you then make and install it. You can find instructions in the extracted tar file, or in some other topics in help. Also you can find some tips from people who have done this in other topics in help. 3. Debian and Ubuntu now include c2esp as an installable package. DEBIAN NOTES ------------ BEWARE, THESE DEBIAN NOTES ARE JUST A GUESS THEY ARE UNTESTED. Install build-essential, cupsys FIRST: $ su # apt-get install build-essential # apt-get install cupsys $ wget -O c2espNN.tar.gz http://
$ tar zxf c2espNN.tar.gz $ cd c2espNN $ ./configure $ make $ su # make install $ firefox http://localhost:631 UNINSTALLING ------------ This will uninstall everything from your system. $ su # make uninstall BUG REPORTS ----------- DEVELOPER AND DEBUGGING TIPS ---------------------------- c2esp creates some files in /tmp if it was compiled with DEBUGFILES = 1 KodakPrintLog - may help to identify where c2esp goes wrong KodakPrintFile - a copy of what gets sent to the printer RasForComp.pbm - the raster data, before it gets compressed and sent to the printer In /etc/cups/cupsd.conf Change LogLevel warn to LogLevel debug to get much more information in /var/log/cups/error_log All the logging output that would go into the file KodakPrintLog now goes into cups/error_log. This allows users who install a binary package to get logging data without needing to recompile. Since cups/error_log gets quite large, the command c2esplog is provided to extract the lines relevant to c2esp from cups/error_log.