Array-IntSpan-2.004/0000755000175000017500000000000013637440152012616 5ustar domidomiArray-IntSpan-2.004/README0000644000175000017500000000341013637440152013474 0ustar domidomi This distribution provides a set of modules: Array::IntSpan - a Module for handling arrays using integer ranges Array::IntSpan::Fields - IntSpan array using integer fields as indices Array::IntSpan::IP - a Module for arrays using IP addresses as indices Array::IntSpan brings the speed advantages of Set::IntSpan (written by Steven McDougall) to arrays. Uses include manipulating grades, routing tables, or any other situation where you have mutually exclusive ranges of integers that map to given values (or objects) The new version of Array::IntSpan is able to consolidate ranges by comparing adjacent values. Array::IntSpan::Fields brings the advantages of Array::IntSpan to indices made of integer fields like an IP address and an ANSI SS7 point code. Array::IntSpan::IP brings the advantages of Array::IntSpan to IP address indices. Anywhere you use an index in Array::IntSpan, you can use an IP address in one of three forms in Array::IntSpan::IP. Version 2.001 was heavily modified from version 1.01. The module was heavily tested but you should test your application with v2.001 before any important use. --------------------------------------------------------------------- INSTALLATION from CPAN gunzip -c .tar.gz | tar xvf - cd perl Makefile.PL make test make install INSTALLATION from git requires Dist::Zilla You must make sure that the following modules are installed: Dist::Zilla::Plugin::MetaResources Dist::Zilla::Plugin::Prepender Dist::Zilla::Plugin::Prereqs Dist::Zilla::PluginBundle::Filter On debian or ubuntu, do: sudo aptitude install \ libdist-zilla-plugin-prepender-perl \ libdist-zilla-plugins-cjm-perl \ libdist-zilla-perl Then run: dzil build or dzil test dzil build Array-IntSpan-2.004/META.yml0000644000175000017500000000203013637440152014062 0ustar domidomi--- abstract: 'Handles arrays of scalars or objects using integer ranges' author: - 'Dominique Dumont' build_requires: Data::Dumper: '0' Test::More: '0' configure_requires: ExtUtils::MakeMaker: '0' dynamic_config: 0 generated_by: 'Dist::Zilla version 6.014, CPAN::Meta::Converter version 2.150010' license: artistic_2 meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html version: '1.4' name: Array-IntSpan provides: Array::IntSpan: file: lib/Array/IntSpan.pm version: '2.004' Array::IntSpan::Fields: file: lib/Array/IntSpan/Fields.pm version: '2.004' Array::IntSpan::IP: file: lib/Array/IntSpan/IP.pm version: '2.004' requires: Carp: '0' perl: '5.008' resources: bugtracker: http://rt.cpan.org/NoAuth/Bugs.html?Dist=Array-IntSpan homepage: https://github.com/dod38fr/array-intspan-perl repository: https://github.com/dod38fr/array-intspan-perl.git version: '2.004' x_generated_by_perl: v5.30.0 x_serialization_backend: 'YAML::Tiny version 1.73' x_spdx_expression: Artistic-2.0 Array-IntSpan-2.004/MANIFEST0000644000175000017500000000053413637440152013751 0ustar domidomi# This file was automatically generated by Dist::Zilla::Plugin::Manifest v6.014. Changes LICENSE MANIFEST META.json META.yml Makefile.PL README dist.ini lib/Array/IntSpan.pm lib/Array/IntSpan/Fields.pm lib/Array/IntSpan/IP.pm t/clobbered_items.t t/consolidate.t t/empty_span.t t/fields.t t/get_range.t t/get_splice_parms.t t/search.t t/set_range.t Array-IntSpan-2.004/t/0000755000175000017500000000000013637440152013061 5ustar domidomiArray-IntSpan-2.004/t/get_range.t0000644000175000017500000001177013637440152015207 0ustar domidomi# -*- cperl-mode -*- use strict ; use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 50 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; # test min max is(Array::IntSpan::min(9,10), 9,'min test 9,10') ; is(Array::IntSpan::max(9,10),10,'max test 9,10') ; my @expect= ([1,3,'ab'],[5, 7, 'cd'], [13, 26, 'ef']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; foreach my $t ( [[32,34],[]], [[4,4],[]], [[24,26],[[24,26,'ef']]], [[24,29],[[24,26,'ef']]], [[10,16],[[13,16,'ef']]], [[20,24],[[20,24,'ef']]], [[0,9],[[1,3,'ab'],[5,7,'cd']]], [[0,6],[[1,3,'ab'],[5,6,'cd']]], ) { my $new = $r->get_range(@{$t->[0]}) ; is_deeply($new, $t->[1], "get_range @{$t->[0]}") || diag("From ".Dumper($r)."Got ".Dumper ($new)) ; is(@$r, 3, 'check nb of items in range') || diag(Dumper $r); } my $fill = 'fi' ; foreach my $t ( [ [32,34], [[32,34,$fill]], [@expect,[32,34,$fill]] ], [ [0,0], [[ 0, 0,$fill]], [[0,0,$fill],@expect] ], [ [5,5], [[ 5, 5,'cd']], [[1,3,'ab'],[ 5, 5,'cd'],[6, 7, 'cd'], [13, 26, 'ef']] ], [ [24,26], [[24,26,'ef' ]], [[1,3,'ab'],[5, 7, 'cd'], [13, 23,'ef'],[24,26, 'ef']] ], [ [24,29], [[24,26,'ef'],[27,29,$fill]], [[1,3,'ab'],[5, 7, 'cd'], [13, 23,'ef'],[24,26,'ef'],[27,29,$fill]] ], [ [10,16], [[10,12,$fill],[13,16,'ef']], [[1,3,'ab'],[5, 7, 'cd'], [10,12,$fill],,[13,16,'ef'],[17, 26, 'ef']] ], [ [20,24], [[20,24,'ef']], [[1,3,'ab'],[5, 7,'cd'],[13,19,'ef'],[20,24,'ef'],[25,26,'ef']] ], [ [0,9], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,7,'cd'],[8,9,$fill]], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,7,'cd'],[8,9,$fill], [13, 26, 'ef']] ], [ [0,6], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,6,'cd']], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,6,'cd'],[7,7,'cd'], [13, 26, 'ef']] ], [ [2,5], [[2,3,'ab'],[4,4,$fill],[5, 5, 'cd']], [[1,1,'ab'],[2,3,'ab'],[4,4,$fill],[5, 5, 'cd'],[6, 7, 'cd'], [13, 26, 'ef']] ] ) { my $r2 = Array::IntSpan->new(@expect) ; my $old = Dumper($r2) ; my $new = $r2->get_range(@{$t->[0]}, $fill) ; is_deeply($new, $t->[1], "get_range with fill @{$t->[0]}") || diag("From ".$old."Got ".Dumper ($new)) ; is_deeply($r2, $t->[2], "range after get_range with fill") || diag("From ".$old."Expected ".Dumper($t->[2])."Got ".Dumper ($r2)) ; } my $sub = sub { "sfi"}; $fill = &$sub ; foreach my $t ( [[30,39],[[30,39,$fill]],[@expect,[30,39,$fill]]], [ [0,9], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,7,'cd'],[8,9,$fill]], [[0,0,$fill],[1,3,'ab'],[4,4,$fill],[5,7, 'cd'],[8,9,$fill], [13, 26, 'ef']] ], ) { my $r2 = Array::IntSpan->new(@expect) ; my $old = Dumper($r2) ; my $new = $r2->get_range(@{$t->[0]}, $sub) ; is_deeply($new, $t->[1], "get_range with fill sub @{$t->[0]}") || diag("From ".$old."Got ".Dumper ($new)) ; is_deeply($r2, $t->[2], "range after get_range with sub") || diag("From ".$old."Expected ".Dumper($t->[2])."Got ".Dumper ($r2)) ; } @expect=([9,9,'ab'],[10,10,'bc'],[11,11,'cd'],[12,12,'ef']); foreach my $t ( [ [9,10], [[9,9,'ab'],[10,10,'bc']], [@expect] ], [ [9,12], [@expect], [@expect] ] ) { my $r2 = Array::IntSpan->new(@expect) ; my $old = Dumper($r2) ; my $new = $r2->get_range(@{$t->[0]}, $sub) ; is_deeply($new, $t->[1], "get_range with fill sub @{$t->[0]}") || diag("From ".$old."Got ".Dumper ($new)) ; is_deeply($r2, $t->[2], "range after get_range with sub") || diag("From ".$old."Expected ".Dumper($t->[2])."Got ".Dumper ($r2)) ; } @expect= ([1,3,'ab'],[5, 5, 'cd'], [13, 26, 'ef']) ; my $rs = Array::IntSpan->new(@expect) ; is_deeply([ $rs->get_range_list ], [[1,3],[5, 5], [13, 26] ], "get_ranges in list context"); is_deeply(scalar $rs->get_range_list, '1-3, 5, 13-26', "get_ranges in scalar context"); diag(Dumper $r) if $trace ; Array-IntSpan-2.004/t/clobbered_items.t0000644000175000017500000000176113637440152016375 0ustar domidomi use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 18 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my @expect= ([1,3,'ab'],[5, 7, 'cd'], [13, 26, 'ef']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; foreach my $t ( [[32,34,'oops'],[]], [[4,4,'oops'],[]], [[24,26,'oops'],[[24,26,'ef']]], [[24,29,'oops'],[[24,26,'ef']]], [[10,16,'oops'],[[13,16,'ef']]], [[20,24,'oops'],[[20,24,'ef']]], [[0,9,'oops'],[[1,3,'ab'],[5,7,'cd']]], [[0,6,'oops'],[[1,3,'ab'],[5,6,'cd']]], ) { my @clobbered = $r->clobbered_items(@{$t->[0]}) ; is(@$r, 3, 'check nb of items in range') || diag(Dumper $r); is_deeply(\@clobbered, $t->[1], "clobbered_items @{$t->[0]}") || diag(Dumper \@clobbered) ; } Array-IntSpan-2.004/t/consolidate.t0000644000175000017500000000366013637440152015557 0ustar domidomi use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 27 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my @expect= ([1,3,'ab'], [6, 7, 'cd'], [8, 13, 'ef'], [14, 14, 'ef']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; $r->consolidate ; @expect= ([1,3,'ab'], [6, 7, 'cd'], [8, 14, 'ef']) ; is_deeply( $r , \@expect, 'consolidate ok') || diag(Dumper $r); diag(Dumper $r) if $trace ; my @sub = ( sub {"c:".$_[2];}, sub {print "set called with @_\n";} ); foreach my $t ( [[5,5,'cd'],0,[[1,3,'ab'], [5, 7, 'cd'], [8, 14, 'ef']]], [[13,16,'ef'],1,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef']]], [[24,26,'ef'],0,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef'],[24,26,'ef']]] , [[19,22,'ef'],0,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef'],[19,22,'ef'],[24,26,'ef']]], [[23,23,'efa'],0,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef'],[19,22,'ef'],[23,23,'efa'],[24,26,'ef']]], [[23,23,'ef'],1,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef'],[19,26,'ef']]], [[17,18,'efb'],0,[[1,3,'ab'], [5, 7, 'cd'], [8, 16, 'ef'],[17,18,'efb'],[19,26,'ef']]], [[17,18,'ef'],1,[[1,3,'ab'], [5, 7, 'cd'], [8 ,26,'ef']]], [[8,12,undef],1,[[1,3,'ab'], [5, 7, 'cd'], [13 ,26,'ef']]], [[8,12,'gh',@sub],0,[[1,3,'ab'], [5, 7, 'cd'],[8,12,'gh'], [13 ,26,'ef']]], [[13,20,'gh',@sub],1,[[1,3,'ab'], [5, 7, 'cd'],[8,20,'gh'], [21 ,26,'c:ef']]], [[6,7,'gh',@sub],1,[[1,3,'ab'], [5, 5, 'c:cd'],[6,20,'gh'], [21 ,26,'c:ef']]], ) { my @range = @{$t->[0]} ; is ($r->set_consolidate_range(@range),$t->[1], "set_consolidate_range @range[0,1]") ; is_deeply($r, $t->[2], "result of @range[0,1]") || diag("Got ".Dumper($r)) ; } Array-IntSpan-2.004/t/get_splice_parms.t0000644000175000017500000000414613637440152016573 0ustar domidomi use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 30 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my @expect= ([1,3,'ab'],[6,9,'cd']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; my $spawn = sub { 'sp:'.$_[2] ;} ; foreach my $a ( [[0, 0,'bc'],[0,0,[0, 0,'bc']]], [[0, 1,'bc'],[0,1,[0, 1,'bc'],[2,3,'ab']]], [[0, 3,'bc'],[0,1,[0, 3,'bc']]], [[0, 4,'bc'],[0,1,[0, 4,'bc']]], [[0, 5,'bc'],[0,1,[0, 5,'bc']]], [[0, 6,'bc'],[0,2,[0, 6,'bc'],[7,9,'cd']]], [[0, 9,'bc'],[0,2,[0, 9,'bc']]], [[0,10,'bc'],[0,2,[0,10,'bc']]], [[1, 3,'bc'],[0,1,[1, 3,'bc']]], [[1, 2,'bc'],[0,1,[1, 2,'bc'],[3, 3,'ab']]], [[2, 2,'bc'],[0,1,[1, 1,'ab'],[2, 2,'bc'],[3,3,'ab']]], [[2, 3,'bc'],[0,1,[1, 1,'ab'],[2, 3,'bc']]], [[2, 5,'bc'],[0,1,[1, 1,'ab'],[2, 5,'bc']]], [[2, 8,'bc'],[0,2,[1, 1,'ab'],[2, 8,'bc'],[9,9,'cd']]], [[2, 9,'bc'],[0,2,[1, 1,'ab'],[2, 9,'bc']]], [[2,10,'bc'],[0,2,[1, 1,'ab'],[2,10,'bc']]], [[4, 4,'bc'],[1,0,[4, 4,'bc']]], [[5, 6,'bc'],[1,1,[5, 6,'bc'],[7,9,'cd']]], [[5, 9,'bc'],[1,1,[5, 9,'bc']]], [[5,11,'bc'],[1,1,[5,11,'bc']]], [[6, 6,'bc'],[1,1,[6, 6,'bc'],[7,9,'cd']]], [[6, 9,'bc'],[1,1,[6, 9,'bc']]], [[7, 9,'bc'],[1,1,[6, 6,'cd'],[7,9,'bc']]], [[9,11,'bc'],[1,1,[6, 8,'cd'],[9,11,'bc']]], [[10,11,'bc'],[2,0,[10,11,'bc']]], [[10,11,'bc', $spawn],[2,0,[10,11,'bc']]], [[9,11,'bc', $spawn],[1,1,[6, 8,'sp:cd'],[9,11,'bc']]], [[2, 2,'bc', $spawn],[0,1,[1, 1,'sp:ab'],[2, 2,'bc'],[3,3,'sp:ab']]], ) { my @r = $r->get_splice_parms(@{$a->[0]}) ; is_deeply(\@r, $a->[1], "get_splice_parms @{$a->[0]}") || diag(Dumper \@r); } Array-IntSpan-2.004/t/set_range.t0000644000175000017500000000243513637440152015221 0ustar domidomi# -*- cperl-mode -*- use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 10 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my @expect= ([1,3,'ab'],[6,9,'cd']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; my @range = (12,14,'ef') ; is ($r->set_range(@range),0, 'set_range after') ; push @expect, [@range] ; is_deeply( $r , \@expect ) ; is($r->lookup(13), 'ef', 'lookup 13') ; diag(Dumper $r) if $trace ; @range = (8,13,'ef') ; @expect = ([1, 3, 'ab'], [6, 7, 'cd'], [8, 13, 'ef'], [14, 14, 'ef']) ; is ($r->set_range(@range),1, "set_range @range") ; is_deeply($r, \@expect) || diag(Dumper $r); diag(Dumper $r) if $trace ; my $sub = sub {"c:".$_[2];} ; @range = (10,13,'ef2') ; @expect = ([1, 3, 'ab'], [6, 7, 'cd'], [8, 9, 'c:ef'], [10, 13, 'ef2'], [14, 14, 'ef']) ; is ($r->set_range(@range,$sub),1, "set_range @range with sub") ; is_deeply($r, \@expect) || diag(Dumper $r); diag(Dumper $r) if $trace ; my $rs = Array::IntSpan->new() ; $rs->set('21','bar'); $rs->set_range_as_string('1-10 ,13, 14-20', 'foo') ; is_deeply($rs, [[1,10,'foo'],[13,13,'foo'],[14,20,'foo'],[21,21,'bar']],"set_range_as_string") || diag(Dumper $rs); Array-IntSpan-2.004/t/search.t0000644000175000017500000000077213637440152014521 0ustar domidomi use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 9 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my @expect= ([1,3,'ab'],[6,9,'cd']) ; my $r = Array::IntSpan->new(@expect) ; diag(Dumper $r) if $trace ; ok ( defined($r) , 'Array::IntSpan new() works') ; is_deeply( $r , \@expect, 'new content ok') ; foreach my $a ( [2,0], [3,0], [4,1], [4,1], [6,1], [9,1] , [10,2]) { is($r->search(0,2,$a->[0]), $a->[1], "search(0,2,$a->[0], $a->[1] )"); } Array-IntSpan-2.004/t/fields.t0000644000175000017500000000361013637440152014514 0ustar domidomiuse strict ; use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 27 ; use Data::Dumper ; use Array::IntSpan::Fields ; my $trace = shift || 0 ; my @expect= (['0.0.1','0.1.0','ab'], ['1.0.0','1.0.3','cd'], ['1.0.4','1.1.0','ef']) ; my $r = Array::IntSpan::Fields->new('1.2.4',@expect) ; ok ( defined($r) , 'Array::IntSpan::Fields new() works') ; is_deeply([$r->get_element(1)], ['1.0.0','1.0.3','cd'], 'get_element' ); foreach my $t (qw/0.0.10 0.3.0 1.0.0 1.2.3 0.1.0/) { my $int = $r-> field_to_int($t); ok ($int, "field_to_int test $t -> $int") ; is($r-> int_to_field($int), $t, "int_to_field test $int -> $t") ; } eval{$r-> field_to_int('2.0.0')} ; like($@, qr/Field value 2 too great/, 'test field check') ; eval{$r-> field_to_int('1.0.17')} ; like($@, qr/Field value 17 too great/, 'test field check') ; $r->set_range('1.1.1','1.2.1','gh') ; is($r->lookup('1.2.0'),'gh',"lookup test") ; my $res = $r->get_range('1.0.0','1.3.15') ; isa_ok($res,'Array::IntSpan::Fields') ; is($res->lookup('1.0.0'),'cd','get range test 1') ; is($res->lookup('1.0.5'),'ef','get range test 2') ; $r->set_range('1.1.5','1.2.5','sub',sub{"@_"}); is($r->lookup('1.2.4'),'sub','set_range with sub') ; is($r->lookup('1.1.4'),'1.1.1 1.1.4 gh','set_range with sub') ; my $regular = Array::IntSpan::Fields->new([1,3,'ab'],[5, 7, 'cd']); isa_ok($regular,'Array::IntSpan') ; my $int32 = Array::IntSpan::Fields->new('32',[1,3,'ab'],[5, 7, 'cd']); isa_ok($int32,'Array::IntSpan::Fields') ; foreach my $t (qw/1 100/) { my $int = $int32-> field_to_int($t); ok ($int, "field_to_int int 32 test $t -> $int") ; is($int32-> int_to_field($int), $t, "int_to_field int 32 test $int -> $t") ; } eval{my $int2 = Array::IntSpan::Fields->new('2',[1,3,'ab'],[5, 7, 'cd']);}; like($@, qr/Field value 5 too great. Max is 3/, 'test field check') ; Array-IntSpan-2.004/t/empty_span.t0000644000175000017500000000117013637440152015424 0ustar domidomi# -*- cperl -*- use warnings FATAL => qw(all); use ExtUtils::testlib; use Test::More tests => 7 ; use Data::Dumper ; use Array::IntSpan; my $trace = shift || 0 ; my $r2 = Array::IntSpan->new() ; ok($r2, 'empty span created') ; # test for RT 61700 is($r2 -> lookup(1),undef,"test lookup on empty span (RT 61700)") ; is(@{$r2->get_range(1,10)}, 0 , 'get on empty set works'); is(@{$r2->set_range(1,10,'ab')}, 0 , 'set on empty set works'); is(@{$r2->set_range(1,10,undef)}, 0 , 'go back to empty set'); is(@$r2, 0 , 'set is empty'); is(@{$r2->set_consolidate_range(1,10,'ab')}, 0 , 'set_consolidate_range on empty set works'); Array-IntSpan-2.004/dist.ini0000644000175000017500000000163213637440152014264 0ustar domidominame = Array-IntSpan author = Dominique Dumont license = Artistic_2_0 copyright_holder = Dominique Dumont copyright_year = 2014 [MetaResources] homepage = https://github.com/dod38fr/array-intspan-perl bugtracker.web = http://rt.cpan.org/NoAuth/Bugs.html?Dist=Array-IntSpan bugtracker.mailto = bug-project@rt.cpan.org repository.url = https://github.com/dod38fr/array-intspan-perl.git repository.web = https://github.com/dod38fr/array-intspan-perl repository.type = git [@Filter] -bundle = @Basic -remove = Readme [MetaProvides::Package] [AutoPrereqs] skip = ^[a-z\d]+$ skip = ExtUtils::testlib skip = Exporter [Prepender] copyright=1 [NextRelease] format = %v%T %{yyyy-MM-dd}d [PkgVersion] ; use 'V=2.234 dzil release' to override version number [Git::NextVersion] [Git::Check] allow_dirty = dist.ini allow_dirty = Changes [Git::Commit] [Git::Tag] [Git::Push] [MetaJSON] [MinimumPerlFast] Array-IntSpan-2.004/Makefile.PL0000644000175000017500000000237713637440152014601 0ustar domidomi# # This file is part of Array-IntSpan # # This software is Copyright (c) 2014 by Dominique Dumont. # # This is free software, licensed under: # # The Artistic License 2.0 (GPL Compatible) # # This file was automatically generated by Dist::Zilla::Plugin::MakeMaker v6.014. use strict; use warnings; use 5.008; use ExtUtils::MakeMaker; my %WriteMakefileArgs = ( "ABSTRACT" => "Handles arrays of scalars or objects using integer ranges", "AUTHOR" => "Dominique Dumont", "CONFIGURE_REQUIRES" => { "ExtUtils::MakeMaker" => 0 }, "DISTNAME" => "Array-IntSpan", "LICENSE" => "artistic_2", "MIN_PERL_VERSION" => "5.008", "NAME" => "Array::IntSpan", "PREREQ_PM" => { "Carp" => 0 }, "TEST_REQUIRES" => { "Data::Dumper" => 0, "Test::More" => 0 }, "VERSION" => "2.004", "test" => { "TESTS" => "t/*.t" } ); my %FallbackPrereqs = ( "Carp" => 0, "Data::Dumper" => 0, "Test::More" => 0 ); unless ( eval { ExtUtils::MakeMaker->VERSION(6.63_03) } ) { delete $WriteMakefileArgs{TEST_REQUIRES}; delete $WriteMakefileArgs{BUILD_REQUIRES}; $WriteMakefileArgs{PREREQ_PM} = \%FallbackPrereqs; } delete $WriteMakefileArgs{CONFIGURE_REQUIRES} unless eval { ExtUtils::MakeMaker->VERSION(6.52) }; WriteMakefile(%WriteMakefileArgs); Array-IntSpan-2.004/Changes0000644000175000017500000000445513637440152014121 0ustar domidomi2.004 2020-03-27 Main change: This module is now distributed under Artistic 2.0 license (instead of Artistic 1.0) Other changes are * add contributors section * clarify and fix typos in documentation * Added minimum perl version as suggested by CPANTS. (Thanks Mohammad S Anwar) 2014-12-24 v2.003 * Added set, set_range_as_string and get_range_list methods * mention that consolidate can be called without arguments 2010-09-28 Dominique Dumont v2.002 * Array/IntSpan.pm (lookup): returns undef on an empty object without mucking up internal data (Fixes RT 61700. Thanks to Matthew Nodine for the report) 2004-01-29 Dominique Dumont v2.001 * IntSpan.pm: Updated copyright infos 2003-05-26 Dominique Dumont * IntSpan.pm, IntSpan/Fields.pm: - bug fix in Fields::adapt_range_in_cb: method can be undef 2003-04-17 Dominique Dumont * IntSpan.pm, IntSpan/Fields.pm: - small code refactoring and perf improvement 2003-03-19 Dominique Dumont * IntSpan.pm: - added clear function in IntSpan 2003-03-07 Dominique Dumont * IntSpan.pm: - some optimizations - cannot create range with undef values. 2003-03-04 Dominique Dumont * IntSpan.pm, IntSpan/Fields.pm: - added Array::IntSpan::Fields - callback signature are now (start, end, [payload]) 2003-02-24 Dominique Dumont * IntSpan.pm: - various get_range bug_fixes 2003-02-14 Dominique Dumont * IntSpan.pm: - get_range bug with fill: read range is now also modified 2003-02-13 Dominique Dumont * IntSpan.pm: - get_range: bug fix with filler subf * IntSpan.pm: - get_range: fill can be done with a sub ref - set_*_range: copy of splitted range items can be done using a sub ref. In this case the original value is passed to the sub ref. It must return the new value 2003-02-12 Dominique Dumont * IntSpan.pm: - added fill parameter to get_range - split tests * IntSpan.pm: - bug fix in empty ranges 2003-02-11 Dominique Dumont * IntSpan.pm: - better get_range and set_range 2003-02-06 Dominique Dumont * IntSpan.pm: Modified version 1.02 with consolidation * IntSpan.pm, IntSpan/IP.pm: Initial version 1.01 from Toby Everett * IntSpan.pm, IntSpan/IP.pm: New file. 1.01 Thu Feb 24 14:10:00 2000 - fixed Makefile.PL 1.00 Thu Feb 24 14:00:00 2000 - original version Array-IntSpan-2.004/LICENSE0000644000175000017500000002152513637440152013630 0ustar domidomiThis software is Copyright (c) 2014 by Dominique Dumont. This is free software, licensed under: The Artistic License 2.0 (GPL Compatible) The Artistic License 2.0 Copyright (c) 2000-2006, The Perl Foundation. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble This license establishes the terms under which a given free software Package may be copied, modified, distributed, and/or redistributed. The intent is that the Copyright Holder maintains some artistic control over the development of that Package while still keeping the Package available as open source and free software. You are always permitted to make arrangements wholly outside of this license directly with the Copyright Holder of a given Package. If the terms of this license do not permit the full use that you propose to make of the Package, you should contact the Copyright Holder and seek a different licensing arrangement. Definitions "Copyright Holder" means the individual(s) or organization(s) named in the copyright notice for the entire Package. "Contributor" means any party that has contributed code or other material to the Package, in accordance with the Copyright Holder's procedures. "You" and "your" means any person who would like to copy, distribute, or modify the Package. "Package" means the collection of files distributed by the Copyright Holder, and derivatives of that collection and/or of those files. A given Package may consist of either the Standard Version, or a Modified Version. "Distribute" means providing a copy of the Package or making it accessible to anyone else, or in the case of a company or organization, to others outside of your company or organization. "Distributor Fee" means any fee that you charge for Distributing this Package or providing support for this Package to another party. It does not mean licensing fees. "Standard Version" refers to the Package if it has not been modified, or has been modified only in ways explicitly requested by the Copyright Holder. "Modified Version" means the Package, if it has been changed, and such changes were not explicitly requested by the Copyright Holder. "Original License" means this Artistic License as Distributed with the Standard Version of the Package, in its current version or as it may be modified by The Perl Foundation in the future. "Source" form means the source code, documentation source, and configuration files for the Package. "Compiled" form means the compiled bytecode, object code, binary, or any other form resulting from mechanical transformation or translation of the Source form. Permission for Use and Modification Without Distribution (1) You are permitted to use the Standard Version and create and use Modified Versions for any purpose without restriction, provided that you do not Distribute the Modified Version. Permissions for Redistribution of the Standard Version (2) You may Distribute verbatim copies of the Source form of the Standard Version of this Package in any medium without restriction, either gratis or for a Distributor Fee, provided that you duplicate all of the original copyright notices and associated disclaimers. At your discretion, such verbatim copies may or may not include a Compiled form of the Package. (3) You may apply any bug fixes, portability changes, and other modifications made available from the Copyright Holder. The resulting Package will still be considered the Standard Version, and as such will be subject to the Original License. Distribution of Modified Versions of the Package as Source (4) You may Distribute your Modified Version as Source (either gratis or for a Distributor Fee, and with or without a Compiled form of the Modified Version) provided that you clearly document how it differs from the Standard Version, including, but not limited to, documenting any non-standard features, executables, or modules, and provided that you do at least ONE of the following: (a) make the Modified Version available to the Copyright Holder of the Standard Version, under the Original License, so that the Copyright Holder may include your modifications in the Standard Version. (b) ensure that installation of your Modified Version does not prevent the user installing or running the Standard Version. In addition, the Modified Version must bear a name that is different from the name of the Standard Version. (c) allow anyone who receives a copy of the Modified Version to make the Source form of the Modified Version available to others under (i) the Original License or (ii) a license that permits the licensee to freely copy, modify and redistribute the Modified Version using the same licensing terms that apply to the copy that the licensee received, and requires that the Source form of the Modified Version, and of any works derived from it, be made freely available in that license fees are prohibited but Distributor Fees are allowed. Distribution of Compiled Forms of the Standard Version or Modified Versions without the Source (5) You may Distribute Compiled forms of the Standard Version without the Source, provided that you include complete instructions on how to get the Source of the Standard Version. Such instructions must be valid at the time of your distribution. If these instructions, at any time while you are carrying out such distribution, become invalid, you must provide new instructions on demand or cease further distribution. If you provide valid instructions or cease distribution within thirty days after you become aware that the instructions are invalid, then you do not forfeit any of your rights under this license. (6) You may Distribute a Modified Version in Compiled form without the Source, provided that you comply with Section 4 with respect to the Source of the Modified Version. Aggregating or Linking the Package (7) You may aggregate the Package (either the Standard Version or Modified Version) with other packages and Distribute the resulting aggregation provided that you do not charge a licensing fee for the Package. Distributor Fees are permitted, and licensing fees for other components in the aggregation are permitted. The terms of this license apply to the use and Distribution of the Standard or Modified Versions as included in the aggregation. (8) You are permitted to link Modified and Standard Versions with other works, to embed the Package in a larger work of your own, or to build stand-alone binary or bytecode versions of applications that include the Package, and Distribute the result without restriction, provided the result does not expose a direct interface to the Package. Items That are Not Considered Part of a Modified Version (9) Works (including, but not limited to, modules and scripts) that merely extend or make use of the Package, do not, by themselves, cause the Package to be a Modified Version. In addition, such works are not considered parts of the Package itself, and are not subject to the terms of this license. General Provisions (10) Any use, modification, and distribution of the Standard or Modified Versions is governed by this Artistic License. By using, modifying or distributing the Package, you accept this license. Do not use, modify, or distribute the Package, if you do not accept this license. (11) If your Modified Version has been derived from a Modified Version made by someone other than you, you are nevertheless required to ensure that your Modified Version complies with the requirements of this license. (12) This license does not grant you the right to use any trademark, service mark, tradename, or logo of the Copyright Holder. (13) This license includes the non-exclusive, worldwide, free-of-charge patent license to make, have made, use, offer to sell, sell, import and otherwise transfer the Package with respect to any patent claims licensable by the Copyright Holder that are necessarily infringed by the Package. If you institute patent litigation (including a cross-claim or counterclaim) against any party alleging that the Package constitutes direct or contributory patent infringement, then this Artistic License to you shall terminate on the date that such litigation is filed. (14) Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Array-IntSpan-2.004/lib/0000755000175000017500000000000013637440152013364 5ustar domidomiArray-IntSpan-2.004/lib/Array/0000755000175000017500000000000013637440152014442 5ustar domidomiArray-IntSpan-2.004/lib/Array/IntSpan/0000755000175000017500000000000013637440152016016 5ustar domidomiArray-IntSpan-2.004/lib/Array/IntSpan/Fields.pm0000644000175000017500000001554713637440152017576 0ustar domidomi# # This file is part of Array-IntSpan # # This software is Copyright (c) 2014 by Dominique Dumont. # # This is free software, licensed under: # # The Artistic License 2.0 (GPL Compatible) # ########################################################################## # # Array::IntSpan::Fields - IntSpan array using integer fields as indices # # Author: Dominique Dumont ########################################################################## # Copyright 2003 Dominique Dumont. All rights reserved. # # This module is distributed under the Artistic 2.0 License. See # https://www.perlfoundation.org/artistic-license-20.html # # For comments, questions, bugs or general interest, feel free to # contact Dominique Dumont ddumont@cpan.org ########################################################################## use strict; use warnings; package Array::IntSpan::Fields; $Array::IntSpan::Fields::VERSION = '2.004'; use Array::IntSpan; use Carp ; use overload # this emulate the usage of Intspan '@{}' => sub { return shift->{range} ;} , # fallback on default behavior for all other operators fallback => 1 ; sub new { my $proto = shift ; my $class = ref($proto) || $proto; my $format = shift ; if (ref $format) { # in fact the user want a regular IntSpan return Array::IntSpan->new($format,@_); } my @temp = @_ ; my $self = {}; bless $self, $class; $self->set_format($format) ; foreach my $i (@temp) { $i->[0] = $self->field_to_int($i->[0]); $i->[1] = $self->field_to_int($i->[1]); } $self->{range}= Array::IntSpan->new(@temp) ; return $self; } sub set_format { my ($self,$format) = @_ ; croak "Unexpected format : $format" unless $format =~ /^[\d\.]+$/ ; $self->{format} = $format ; my @array = split /\./, $self->{format} ; # store nb of bit and corresponding bit mask $self->{fields} = [map { [$_, (1<<$_) -1 ]} @array ] ; } sub int_to_field { my $self = shift ; my @all_int = @_ ; my @result ; foreach my $int (@all_int) { my @res ; foreach my $f (reverse @{$self->{fields}}) { unshift @res, ($f->[0] < 32 ? ($int & $f->[1]) : $int ) ; $int >>= $f->[0] ; } push @result, join('.',@res) ; } return wantarray ? @result : $result[0]; } sub field_to_int { my $self = shift ; my @all_field = @_; my @result ; foreach my $field (@all_field) { my $f = $self->{fields}; my @array = split /\./,$field ; croak "Expected ",scalar @$f, " fields for format $self->{format}, got ", scalar @array," in '$field'\n" unless @array == @$f ; my $res = 0 ; my $i =0 ; while ($i <= $#array) { my $shift = $f->[$i][0] ; croak "Field value $array[$i] too great. ", "Max is $f->[$i][1] (bit width is $shift)" if $shift<32 and $array[$i] >> $shift ; $res = ($res << $shift) + $array[$i++] ; } #print "field_to_int: changed $field to $res for format $self->{format}\n"; push @result, $res ; } return wantarray ? @result : $result[0]; } sub get_range { my ($self,$s_field,$e_field) = splice @_,0,3 ; my ($s, $e) = $self->field_to_int($s_field,$e_field) ; my @newcb = $self->adapt_range_in_cb(@_) ; my $got = $self->{range}->get_range($s,$e,@newcb) ; my $ret = bless {range => $got }, ref($self) ; $ret->set_format($self->{format}) ; return $ret ; } sub lookup { my $self = shift; my @keys = $self->field_to_int(@_); $self->{range}->lookup(@keys) ; } sub clear { my $self = shift; @{$self->{range}} = () ; } sub consolidate { my ($self,$s_field,$e_field) = splice @_,0,3 ; my ($s, $e) = $self->field_to_int($s_field,$e_field) if defined $s_field and defined $e_field; my @newcb = $self->adapt_range_in_cb(@_) if @_; return $self->{range}->consolidate($s,$e,@newcb) ; } foreach my $method (qw/set_range set_consolidate_range/) { no strict 'refs' ; *$method = sub { my ($self,$s_field,$e_field,$value) = splice @_,0,4 ; my ($s, $e) = $self->field_to_int($s_field,$e_field) ; my @newcb = $self->adapt_range_in_cb(@_) ; return $self->{range}->$method ($s, $e, $value, @newcb); }; } sub adapt_range_in_cb { my $self = shift; # the callbacks will be called with ($start, $end,$payload) or # ($start,$end) my @callbacks = @_ ; return map { my $old_cb = $_; # required for closure to work defined $old_cb ? sub { my ($s_int,$e_int,$value) = @_ ; my ($s,$e) = $self->int_to_field($s_int,$e_int) ; $old_cb->($s,$e,$value); } : undef ; } @callbacks ; } sub get_element { my ($self,$idx) = @_; my $elt = $self->{range}[$idx] || return () ; my ($s_int,$e_int,$value) = @$elt ; my ($s,$e) = $self->int_to_field($s_int,$e_int) ; return ($s,$e, $value) ; } 1; __END__ =head1 NAME Array::IntSpan::Fields - IntSpan array using integer fields as indices =head1 SYNOPSIS use Array::IntSpan::Fields; my $foo = Array::IntSpan::Fields ->new( '1.2.4', ['0.0.1','0.1.0','ab'], ['1.0.0','1.0.3','cd']); print "Address 0.0.15 has ".$foo->lookup("0.0.15").".\n"; $foo->set_range('1.0.4','1.1.0','ef') ; =head1 DESCRIPTION C brings the advantages of C to indices made of integer fields like an IP address and an ANSI SS7 point code. The number of integer and their maximum value is defined when calling the constructor (or the C method). The example in the synopsis defines an indice with 3 fields where their maximum values are 1,3,15 (or 0x1,0x3,0xf). This module converts the fields into integer before storing them into the L module. =head1 CONSTRUCTOR =head2 new (...) The first parameter defines the size of the integer of the fields, in number of bits. For an IP address, the field definition would be C<8,8,8,8>. =head1 METHODS All methods of L are available. =head2 set_format( field_description ) Set another field description. Beware: no conversion or checking is done. When changing the format, old indices may become illegal. =head2 int_to_field ( integer ) Returns the field representation of the integer. =head2 field_to_int ( field ) Returns the integer value of the field. May craok if the fields values are too great with respect to the filed description. =head1 AUTHOR Dominique Dumont, ddumont@cpan.org Copyright (c) 2003 Dominique Dumont. All rights reserved. This module is distributed under the Artistic 2.0 License. See https://www.perlfoundation.org/artistic-license-20.html =cut Array-IntSpan-2.004/lib/Array/IntSpan/IP.pm0000644000175000017500000001125213637440152016665 0ustar domidomi# # This file is part of Array-IntSpan # # This software is Copyright (c) 2014 by Dominique Dumont. # # This is free software, licensed under: # # The Artistic License 2.0 (GPL Compatible) # ########################################################################## # # Array::IntSpan::IP - a Module for arrays using IP addresses as indices # # Author: Toby Everett # Revision: 1.01 # Last Change: Makefile.PL ########################################################################## # Copyright 2000 Toby Everett. All rights reserved. # # This module is distributed under the Artistic 2.0 License. See # https://www.perlfoundation.org/artistic-license-20.html # # For comments, questions, bugs or general interest, feel free to # contact Toby Everett at teverett@alascom.att.com ########################################################################## use strict; use Array::IntSpan; package Array::IntSpan::IP; $Array::IntSpan::IP::VERSION = '2.004'; use vars qw($VERSION @ISA); $VERSION = '1.01'; @ISA = ('Array::IntSpan'); sub new { my $class = shift; my(@temp) = @_; foreach my $i (@temp) { $i->[0] = &ip_as_int($i->[0]); $i->[1] = &ip_as_int($i->[1]); } return $class->SUPER::new(@temp); } sub set_range { my $self = shift; my(@temp) = @_; $temp[0] = &ip_as_int($temp[0]); $temp[1] = &ip_as_int($temp[1]); return $self->SUPER::set_range(@temp); } sub lookup { my $self = shift; my($key) = @_; return $self->SUPER::lookup(&ip_as_int($key)); } sub ip_as_int { my($value) = @_; if ($value =~ /^(\d{1,3}\.){3}(\d{1,3})$/) { my(@values) = split(/\./, $value); scalar(grep {$_ > 255} @values) and croak("Unable to parse '$value' as an IP address."); return 16777216*$values[0]+65536*$values[1]+256*$values[2]+$values[3]; } elsif (length($value) == 4) { return unpack('N', $value) } elsif ($value =~ /^\d+$/) { return int($value); } else { croak("Unable to parse '$value' as an IP address."); } } #The following code is courtesy of Mark Jacob-Dominus, sub croak { require Carp; *croak = \&Carp::croak; goto &croak; } 1; __END__ =head1 NAME Array::IntSpan::IP - a Module for arrays using IP addresses as indices =head1 SYNOPSIS use Array::IntSpan::IP; my $foo = Array::IntSpan::IP->new(['123.45.67.0', '123.45.67.255', 'Network 1'], ['123.45.68.0', '123.45.68.127', 'Network 2'], ['123.45.68.128', '123.45.68.255', 'Network 3']); print "The address 123.45.68.37 is on network ".$foo->lookup("\173\105\150\45").".\n"; unless (defined($foo->lookup(((123*256+45)*256+65)*256+67))) { print "The address 123.45.65.67 is not on a known network.\n"; } print "The address 123.45.68.177 is on network ".$foo->lookup("123.45.68.177").".\n"; $foo->set_range('123.45.68.128', '123.45.68.255', 'Network 4'); print "The address 123.45.68.177 is now on network ".$foo->lookup("123.45.68.177").".\n"; =head1 DESCRIPTION C brings the advantages of C to IP address indices. Anywhere you use an index in C, you can use an IP address in one of three forms in C. The three accepted forms are: =over 4 =item Dotted decimal This is the standard human-readable format for IP addresses. The conversion checks that the octets are in the range 0-255. Example: C<'123.45.67.89'>. =item Network string A four character string representing the octets in network order. Example: C<"\173\105\150\131">. =item Integer A integer value representing the IP address. Example: C<((123*256+45)*256+67)*256+89> or C<2066563929>. =back Note that the algorithm has no way of distinguishing between the integer values 1000 through 9999 and the network string format. It will presume network string format in these instances. For instance, the integer C<1234> (representing the address C<'0.0.4.210'>) will be interpreted as C<"\61\62\63\64">, or the IP address C<'49.50.51.52'>. This is unavoidable since Perl does not strongly type integers and strings separately and there is no other information available to distinguish between the two in this situation. I do not expect that this will be a problem in most situations. Most users will probably use dotted decimal or network string notations, and even if they do use the integer notation the likelyhood that they will be using the addresses C<'0.0.3.232'> through C<'0.0.39.15'> as indices is relatively low. =head1 METHODS =head2 ip_as_int The class method C takes as its one parameter the IP address in one of the three formats mentioned above and returns the integer notation. =head1 AUTHOR Toby Everett, teverett@alascom.att.com =cut Array-IntSpan-2.004/lib/Array/IntSpan.pm0000644000175000017500000005571213637440152016366 0ustar domidomi# # This file is part of Array-IntSpan # # This software is Copyright (c) 2014 by Dominique Dumont. # # This is free software, licensed under: # # The Artistic License 2.0 (GPL Compatible) # ########################################################################## # # Array::IntSpan - a Module for handling arrays using IntSpan techniques # # Author: Toby Everett, Dominique Dumont # ########################################################################## # Copyright 2003-2004,2010,2014 Dominique Dumont. All rights reserved. # Copyright 2000 Toby Everett. All rights reserved. # # This file is distributed under the Artistic 2.0 License. See # https://www.perlfoundation.org/artistic-license-20.html # # For comments, questions, bugs or general interest, feel free to # contact Dominique Dumont at ddumont@cpan.org ########################################################################## use strict; use warnings ; package Array::IntSpan; $Array::IntSpan::VERSION = '2.004'; sub min { my @a = sort {$a <=> $b} @_ ; return $a[0] ; } sub max { my @a = sort {$b <=> $a} @_ ; return $a[0] ; } sub new { my $class = shift; my $self = [@_]; bless $self, $class; $self->_check_structure; return $self; } #internal function sub search { my ($self,$start,$end,$index) = @_ ; # Binary search for the first element that is *entirely* before the # element to be inserted while ($start < $end) { my $mid = int(($start+$end)/2); if ($self->[$mid][1] < $index) { $start = $mid+1; } else { $end = $mid; } } return $start ; } # clear the range. Note the the $self ref is preserved sub clear { my $self = shift; @$self = () ; } sub set_range_as_string { my $self = shift; my $str = shift; $str =~ s/\s//g; foreach my $substr (split /,/, $str) { my @range = $substr =~ /-/ ? split /-/,$substr : ($substr) x 2; $self->set_range(@range, @_); } } sub set { my $self = shift; my $idx = shift; $self->set_range($idx, $idx, @_); } sub set_range { my $self = shift; #Test that we were passed appropriate values @_ == 3 or @_ == 4 or croak("Array::IntSpan::set_range should be called with 3 values and an ". "optional code ref."); $_[0] <= $_[1] or croak("Array::IntSpan::set_range called with bad indices: ". "$_[0] and $_[1]."); not defined $_[3] or ref($_[3]) eq 'CODE' or croak("Array::IntSpan::set_range called without 4th parameter ". "set as a sub ref"); my ($offset,$length,@list) = $self -> get_splice_parms(@_) ; #print "splice $offset,$length,@list\n"; splice @$self, $offset,$length,@list ; return $length ? 1 : 0 ; } # not well tested or documented. May be useless... sub check_clobber { my $self = shift; my @clobbered = $self->clobbered_items(@_) ; map {warn "will clobber @$_ with @_\n" ;} @clobbered ; return @clobbered ; } sub get_element { my ($self,$idx) = @_; my $ref = $self->[$idx] ; return () unless defined $ref ; return @$ref ; } # call-back: # filler (start, end) # copy (start, end, payload ) # set (start, end, payload) sub get_range { my $self = shift; #my($new_elem) = [@_]; my ($start_elem,$end_elem, $filler, $copy, $set) = @_ ; $copy = sub{$_[2];} unless defined $copy ; my $end_range = $#{$self}; my $range_size = @$self ; # nb of elements # Before we binary search, first check if we fall before the range if ($end_range < 0 or $self->[$end_range][1] < $start_elem) { my @arg = ref($filler) ? ([$start_elem,$end_elem,&$filler($start_elem,$end_elem)]) : defined $filler ? ([@_]) : () ; push @$self, @arg if @arg; return ref($self)->new(@arg) ; } # Before we binary search, first check if we fall after the range if ($end_elem < $self->[0][0]) { my @arg = ref($filler) ? ([$start_elem,$end_elem,&$filler($start_elem,$end_elem)]) : defined $filler ? ([@_]) : () ; unshift @$self, @arg if @arg; return ref($self)->new(@arg) ; } my $start = $self->search(0, $range_size, $start_elem) ; my $end = $self->search($start,$range_size, $end_elem) ; my $start_offset = $start_elem - $self->[$start][0] ; my $end_offset = defined $self->[$end] ? $end_elem - $self->[$end][0] : undef ; #print "get_range: start $start, end $end, start_offset $start_offset"; #print ", end_offset $end_offset" if defined $end_offset ; #print "\n"; my @extracted ; my @replaced ; my $length = 0; # handle the start if (defined $filler and $start_offset < 0) { my $e = min ($end_elem, $self->[$start][0]-1) ; my $new = ref($filler) ? &$filler($start_elem, $e) : $filler ; my @a = ($start_elem, $e, $new) ; # don't use \@a, as we don't want @extracted and @replaced to # point to the same memory area. But $new must point to the same # object push @extracted, [ @a ] ; push @replaced, [ @a ] ; } if ($self->[$start][0] <= $end_elem) { my $s = max ($start_elem,$self->[$start][0]) ; my $e = min ($end_elem, $self->[$start][1]) ; my $payload = $self->[$start][2] ; if ($self->[$start][0] < $s) { my $s1 = $self->[$start][0]; my $e1 = $s - 1 ; push @replaced, [$s1, $e1 , &$copy($s1,$e1,$payload) ]; } # must duplicate the start, end variable push @extracted, [$s, $e, $payload]; push @replaced, [$s, $e, $payload]; if ($e < $self->[$start][1]) { my $s3 = $e+1 ; my $e3 = $self->[$start][1] ; push @replaced, [$s3, $e3, &$copy($s3, $e3,$payload) ] ; } &$set($s,$e, $payload) if defined $set ; $length ++ ; } # handle the middle if any if ($start + 1 <= $end -1 ) { #print "adding " ; foreach my $idx ( $start+1 .. $end - 1) { #print "idx $idx," ; if (defined $filler) { my $start_fill = $self->[$idx-1][1]+1 ; my $end_fill = $self->[$idx][0]-1 ; if ($start_fill <= $end_fill) { my $new = ref($filler) ? &$filler($start_fill, $end_fill) : $filler ; push @extracted, [$start_fill, $end_fill, $new] ; push @replaced, [$start_fill, $end_fill, $new]; } } push @extracted, [@{$self->[$idx]}]; push @replaced , [@{$self->[$idx]}]; $length++ ; } #print "\n"; } # handle the end if ($end > $start) { if (defined $filler) { # must add end element filler my $start_fill = $self->[$end-1][1]+1 ; my $end_fill = (not defined $end_offset or $end_offset < 0) ? $end_elem : $self->[$end][0]-1 ; if ($start_fill <= $end_fill) { my $new = ref($filler) ? &$filler($start_fill, $end_fill) : $filler ; push @extracted, [$start_fill, $end_fill, $new] ; push @replaced, [$start_fill, $end_fill, $new]; } } if (defined $end_offset and $end_offset >= 0) { my $payload = $self->[$end][2] ; my $s = $self->[$end][0] ; my @a = ($s,$end_elem, $payload) ; push @extracted, [@a]; push @replaced , [@a]; if ($end_elem < $self->[$end][1]) { my $s2 = $end_elem + 1 ; my $e2 = $self->[$end][1] ; push @replaced , [$s2, $e2, &$copy($s2,$e2,$payload)]; } &$set($s,$end_elem, $payload) if defined $set ; $length++ ; } } if (defined $filler) { splice (@$self, $start,$length , @replaced) ; } my $ret = ref($self)->new(@extracted) ; return $ret ; } sub clobbered_items { my $self = shift; my($range_start,$range_stop,$range_value) = @_; my $item = $self->get_range($range_start,$range_stop) ; return grep {$_->[2] ne $range_value} @$item ; } # call-back: # set (start, end, payload) sub consolidate { my ($self,$bottom,$top,$set) = @_; $bottom = 0 if (not defined $bottom or $bottom < 0 ); $top = $#$self if (not defined $top or $top > $#$self) ; #print "consolidate from $top to $bottom\n"; for (my $i= $top; $i>0; $i--) { if ($self->[$i][2] eq $self->[$i-1][2] and $self->[$i][0] == $self->[$i-1][1]+1 ) { #print "consolidate splice ",$i-1,",2\n"; my ($s,$e,$p) = ($self->[$i-1][0], $self->[$i][1], $self->[$i][2]); splice @$self, $i-1, 2, [$s, $e, $p] ; $set->($s,$e,$p) if defined $set ; } } } sub set_consolidate_range { my $self = shift; #Test that we were passed appropriate values @_ == 3 or @_ == 5 or croak("Array::IntSpan::set_range should be called with 3 values ". "and 2 optional code ref."); $_[0] <= $_[1] or croak("Array::IntSpan::set_range called with bad indices: $_[0] and $_[1]."); not defined $_[3] or ref($_[3]) eq 'CODE' or croak("Array::IntSpan::set_range called without 4th parameter set as a sub ref"); my ($offset,$length,@list) = $self -> get_splice_parms(@_[0,1,2,3]) ; #print "splice $offset,$length\n"; splice @$self, $offset,$length,@list ; my $nb = @list ; $self->consolidate($offset - 1 , $offset+ $nb , $_[4]) ; return $length ? 1 : 0 ;#($b , $t ) ; } # get_range_list # scalar context -> return a string # list context => returns list of list sub get_range_list { my ($self, %options) = @_; if (wantarray) { return map { [ @$_[0,1] ] } @$self; } else { return join ', ' , map { my ($a,$b) = @$_; $a == $b ? $a : $a+1==$b ? join(', ',$a,$b) : join('-',$a,$b); } @$self; } } # internal function # call-back: # copy (start, end, payload ) sub get_splice_parms { my $self = shift; my ($start_elem,$end_elem,$value,$copy) = @_ ; my $end_range = $#{$self}; my $range_size = @$self ; # nb of elements #Before we binary search, we'll first check to see if this is an append operation if ( $end_range < 0 or $self->[$end_range][1] < $start_elem ) { return defined $value ? ( $range_size, 0, [$start_elem,$end_elem,$value]) : ($range_size, 0) ; } # Check for prepend operation if ($end_elem < $self->[0][0] ) { return defined $value ? ( 0 , 0, [$start_elem,$end_elem,$value]) : (0,0); } #Binary search for the first element after the last element that is entirely #before the element to be inserted (say that ten times fast) my $start = $self->search(0, $range_size, $start_elem) ; my $end = $self->search($start,$range_size, $end_elem) ; my $start_offset = $start_elem - $self->[$start][0] ; my $end_offset = defined $self->[$end] ? $end_elem - $self->[$end][0] : undef ; #print "get_splice_parms: start $start, end $end, start_offset $start_offset"; #print ", end_offset $end_offset" if defined $end_offset ; #print "\n"; my @modified = () ; #If we are here, we need to test for whether we need to frag the #conflicting element if ($start_offset > 0) { my $item = $self->[$start][2] ; my $s = $self->[$start][0] ; my $e = $start_elem-1 ; my $new = defined($copy) ? $copy->($s,$e,$item) : $item ; push @modified ,[$s, $e, $new ]; } push @modified, [$start_elem,$end_elem,$value] if defined $value ; #Do a fragmentation check if (defined $end_offset and $end_offset >= 0 and $end_elem < $self->[$end][1] ) { my $item = $self->[$end][2] ; my $s = $end_elem+1 ; my $e = $self->[$end][1] ; my $new = defined($copy) ? $copy->($s,$e,$item) : $item ; push @modified , [$s, $e, $new] ; } my $extra = (defined $end_offset and $end_offset >= 0) ? 1 : 0 ; return ($start, $end - $start + $extra , @modified); } sub lookup { my $self = shift; my($key) = @_; my($start, $end) = (0, $#{$self}); return undef unless $end >= 0 ; # completely empty span while ($start < $end) { my $mid = int(($start+$end)/2); if ($self->[$mid][1] < $key) { $start = $mid+1; } else { $end = $mid; } } if ($self->[$start]->[0] <= $key && $self->[$start]->[1] >= $key) { return $self->[$start]->[2]; } return undef; } sub _check_structure { my $self = shift; return unless $#$self >= 0; foreach my $i (0..$#$self) { @{$self->[$i]} == 3 or croak("Array::IntSpan::_check_structure failed - element $i lacks 3 entries."); $self->[$i][0] <= $self->[$i][1] or croak("Array::IntSpan::_check_structure failed - element $i has bad indices."); if ($i > 0) { $self->[$i-1][1] < $self->[$i][0] or croak("Array::IntSpan::_check_structure failed - element $i (", ,$self->[$i][0],",",$self->[$i][1], ") doesn't come after previous element (", $self->[$i-1][0],",",$self->[$i-1][1],")"); } } } #The following code is courtesy of Mark Jacob-Dominus, sub croak { require Carp; no warnings 'redefine' ; *croak = \&Carp::croak; goto &croak; } 1; __END__ =head1 NAME Array::IntSpan - Handles arrays of scalars or objects using integer ranges =head1 SYNOPSIS use Array::IntSpan; my $foo = Array::IntSpan->new([0, 59, 'F'], [60, 69, 'D'], [80, 89, 'B']); print "A score of 84% results in a ".$foo->lookup(84).".\n"; unless (defined($foo->lookup(70))) { print "The grade for the score 70% is currently undefined.\n"; } $foo->set_range(70, 79, 'C'); print "A score of 75% now results in a ".$foo->lookup(75).".\n"; $foo->set_range(0, 59, undef); unless (defined($foo->lookup(40))) { print "The grade for the score 40% is now undefined.\n"; } $foo->set_range(87, 89, 'B+'); $foo->set_range(85, 100, 'A'); $foo->set_range(100, 1_000_000, 'A+'); =head1 DESCRIPTION C brings the speed advantages of C (written by Steven McDougall) to arrays. Uses include manipulating grades, routing tables, or any other situation where you have mutually exclusive ranges of integers that map to given values. The new version of C is also able to consolidate the ranges by comparing the adjacent values of the range. If 2 adjacent values are identical, the 2 adjacent ranges are merged. =head1 Ranges of objects C can also handle objects instead of scalar values. But for the consolidation to work, the payload class must overload the C<"">, C and C<==> operators to perform the consolidation comparisons. When a get_range method is called to a range of objects, it will return a new range of object referencess. These object references points to the objects stored in the original range. In other words the objects contained in the returned range are B copied. Thus if the user calls a methods on the objects contained in the returned range, the method is actually invoked on the objects stored in the original range. When a get_range method is called on a range of objects, several things may happen: =over =item * The get_range spans empty slots. By default the returned range will skip the empty slots. But the user may provide a callback to create new objects (for instance). See details below. =item * The get_range splits existing ranges. By default, the split range will contains the same object reference. The user may provide callback to perform the object copy so that the split range will contains different objects. See details below. =back =head1 Ranges specified with integer fields =over =item * C is also provided with the distribution. It lets you use IP addresses in any of three forms (dotted decimal, network string, and integer) for the indices into the array. See the POD for that module for more information. See L for details. =item * C is also provided with the distribution. It let you specify an arbitrary specification to handle ranges with strings made of several integer separared by dots (like IP addresses of ANSI SS7 point codes). See L for details. =back =head1 METHODS =head2 new (...) The C method takes an optional list of array elements. The elements should be in the form C<[start_index, end_index, value]>. They should be in sorted order and there should be no overlaps. The internal method C<_check_structure> will be called to verify the data is correct. If you wish to avoid the performance penalties of checking the structure, you can use C to dump an object and use that code to reconstitute it. =head2 clear Clear the range. =head2 set_range (start, end, value [, code ref] ) This method takes three parameters - the C, the C, and the C. If you wish to erase a range, specify C for the C. It properly deals with overlapping ranges and will replace existing data as appropriate. If the new range lies after the last existing range, the method will execute in O(1) time. If the new range lies within the existing ranges, the method executes in O(n) time, where n is the number of ranges. It does not consolidate contiguous ranges that have the same C. If you have a large number of inserts to do, it would be beneficial to sort them first. Sorting is O(n lg(n)), and since appending is O(1), that will be considerably faster than the O(n^2) time for inserting n unsorted elements. The method returns C<0> if there were no overlapping ranges and C<1> if there were. The optional code ref is called back when an existing range is split. For instance if the original range is C<[0,10,$foo_obj]> and set_range is called with C<[5,7,$bar_obj']>, the callback will be called twice: $callback->(0, 4,$foo_obj) $callback->(8,10,$foo_obj) It will be the callback responsability to make sure that the range C<0-4> and C<7-10> holds 2 I objects. =head2 set( index, value [, code ref] ) Set a single value. This may split an existing range. Actually calls: set_range( index, index, value [, code ref] ) =head2 set_range_as_string ( index, string [, code ref] ) Set one one several ranges specified with a string. Ranges are separated by "-". Several ranges can be specified with commas. Example: set_range_as_string( '1-10,13, 14-20', 'foo') White space are ignored. =head2 get_range (start, end [, filler | undef , copy_cb [, set_cb]]) This method returns a range (actually an Array::IntSpan object) from C to C. If C and C span empty slot in the original range, get_range will skip the empty slots. If a C value is provided, get_range will fill the slots with it. original range : [2-4,X],[7-9,Y],[12-14,Z] get_range(3,8) : [3-4,X],[7-8,Y] get_range(2,10,f) : [3-4,X],[5-6,f],[7-8,Y] If the C parameter is a CODE reference, the filler value will be the one returned by the sub ref. The sub ref is invoked with C<(start,end)>, i.e. the range of the empty span to fill (C in the example above). When handling object, the sub ref can invoke an object constructor. If C or C split an original range in 2, the default behavior is to copy the value or object ref contained in the original range: original range : [1-4,X] split range : [1-1,X],[2-2,X],[3-4,X] get_range(2) : [2-2,X] If the original range contains object, this may lead to disapointing results. In the example below the 2 ranges contains references (C) that points to the same object: original range : [1-4,obj_a] split range : [1-1,obj_a],[2-2,obj_a],[3-4,obj_a] get_range(2) : [2-2,obj_a] Which means that invoking a method on the object returned by C will also be invoked on the range 1-4 of the original range which may not be what you want. If C is invoked with a copy parameter (actually a code reference), the result of this routine will be stored in the split range I of the get_range: original range : [1-4,X] get_range(2) : [2-2,X] split range : [1-1,copy_of_X],[2-2,X],[3-4,copy_of_X] When dealing with object, the sub ref should provide a copy of the object: original range : [1-4,obj_a] get_range(2) : [2-2,obj_a] split range : [1-1,obj_a1],[2-2,obj_a],[3-4,obj_a2] Note that the C contained in the C and the C contained in the returned range point to the I. The sub ref is invoked with C<(start,end,obj_a)> and is expected to return a copy of C that will be stored in the split ranges. In the example above, 2 different copies are made: C and C. Last, a 3rd callback may be defined by the user: the C. This callback will be used when the range start or end that holds an object changes. In the example above, the C will be called this way: $obj_a->&$set_cb(2,2) ; As a matter of fact, the 3 callback can be used in the same call. In the example below, C is invoked with 3 subs refs: C<\&f,\&cp,\&set>: original range : [1-4,obj_a],[7-9,obj_b] get_range(3-8,...) : [3-4,obj_a],[5-6,obj_fill],[7-8,obj_b] split range : [1-2,obj_a1], [3-4,obj_a],[5-6,obj_fill], [7-8,obj_b],[9-9,obj_b1] To obtain this, get_range will perform the following calls: $obj_fill = &f ; $obj_a1 = &cp(5,6,obj_a); &set(3,4,$obj_a) ; $obj_b = &cp(9,9,obj_b) ; &set(7-8,obj_b) ; =head2 get_range_list In scalar context, returns a list of range in a string like: "C<1-5,7,9-11>". In list context retunrs a list of list, E.g. C< ( [1,5], [7,7], 9,11])>. =head2 lookup( index ) This method takes as a single parameter the C to look up. If there is an appropriate range, the method will return the associated value. Otherwise, it returns C. =head2 get_element( element_number ) Returns an array containing the Nth range element: ( start, end, value ) =head2 consolidate( [ bottom, top , [ set_cb ]] ) This function scans the range from the range index C to C and compare the values held by the adjacent ranges. If the values are identical, the adjacent ranges are merged. The comparison is made with the C<==> operator. Objects stored in the range B overload the C<==> operator. If not, the comparison is made with the standard stringification of an object and the merge never happens. If provided, the C is invoked on the contained object after 2 ranges are merged. For instance, if C<"$obj_a" eq "$obj_b">: original range is : [1-4,obj_a],[5-9,obj_b] consolidate(0,1,\&set) yields: [1-9,obj_a] And C performs this call: $set->(1,9,obj_a) ; Consolidate the whole range when called without parameters. =head1 CONTRIBUTORS =over =item * Mohammad S Anwar =back =head1 AUTHORS =over =item * Toby Everett, teverett@alascom.att.com =item * Dominique Dumont, ddumont@cpan.org =back Copyright (c) 2000 Toby Everett. Copyright (c) 2003-2004,2014,2020 Dominique Dumont. All rights reserved. This program is free software. This module is distributed under the Artistic 2.0 License. See https://www.perlfoundation.org/artistic-license-20.html =cut Array-IntSpan-2.004/META.json0000644000175000017500000000340613637440152014242 0ustar domidomi{ "abstract" : "Handles arrays of scalars or objects using integer ranges", "author" : [ "Dominique Dumont" ], "dynamic_config" : 0, "generated_by" : "Dist::Zilla version 6.014, CPAN::Meta::Converter version 2.150010", "license" : [ "artistic_2" ], "meta-spec" : { "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec", "version" : 2 }, "name" : "Array-IntSpan", "prereqs" : { "configure" : { "requires" : { "ExtUtils::MakeMaker" : "0" } }, "runtime" : { "requires" : { "Carp" : "0", "perl" : "5.008" } }, "test" : { "requires" : { "Data::Dumper" : "0", "Test::More" : "0" } } }, "provides" : { "Array::IntSpan" : { "file" : "lib/Array/IntSpan.pm", "version" : "2.004" }, "Array::IntSpan::Fields" : { "file" : "lib/Array/IntSpan/Fields.pm", "version" : "2.004" }, "Array::IntSpan::IP" : { "file" : "lib/Array/IntSpan/IP.pm", "version" : "2.004" } }, "release_status" : "stable", "resources" : { "bugtracker" : { "mailto" : "bug-project@rt.cpan.org", "web" : "http://rt.cpan.org/NoAuth/Bugs.html?Dist=Array-IntSpan" }, "homepage" : "https://github.com/dod38fr/array-intspan-perl", "repository" : { "type" : "git", "url" : "https://github.com/dod38fr/array-intspan-perl.git", "web" : "https://github.com/dod38fr/array-intspan-perl" } }, "version" : "2.004", "x_generated_by_perl" : "v5.30.0", "x_serialization_backend" : "Cpanel::JSON::XS version 4.19", "x_spdx_expression" : "Artistic-2.0" }