wbar-2.3.4/0000755000175000017500000000000012027635465012517 5ustar00sotosoto00000000000000wbar-2.3.4/INSTALL0000644000175000017500000003633212027635256013555 0ustar00sotosoto00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf bug. Until the bug is fixed you can use this workaround: CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. wbar-2.3.4/depcomp0000755000175000017500000004426712027635256014107 0ustar00sotosoto00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2009-04-28.21; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free # Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u="sed s,\\\\\\\\,/,g" depmode=msvisualcpp fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: wbar-2.3.4/install-sh0000755000175000017500000003253712027635256014533 0ustar00sotosoto00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: wbar-2.3.4/configure0000755000175000017500000070017012027635262014426 0ustar00sotosoto00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.67 for wbar 2.3.4. # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software # Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='wbar' PACKAGE_TARNAME='wbar' PACKAGE_VERSION='2.3.4' PACKAGE_STRING='wbar 2.3.4' PACKAGE_BUGREPORT='' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS PIDOF_BIN WBAR_CONFIG_FALSE WBAR_CONFIG_TRUE gui_modules_LIBS gui_modules_CFLAGS modules_LIBS modules_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG MKINSTALLDIRS POSUB POFILES PO_IN_DATADIR_FALSE PO_IN_DATADIR_TRUE INTLLIBS INSTOBJEXT GMOFILES CATOBJEXT CATALOGS MSGFMT_OPTS DATADIRNAME ALL_LINGUAS INTLTOOL_PERL GMSGFMT MSGFMT MSGMERGE XGETTEXT INTLTOOL_POLICY_RULE INTLTOOL_SERVICE_RULE INTLTOOL_THEME_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_CAVES_RULE INTLTOOL_XML_NOMERGE_RULE INTLTOOL_XML_RULE INTLTOOL_KBD_RULE INTLTOOL_XAM_RULE INTLTOOL_UI_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_SHEET_RULE INTLTOOL_SERVER_RULE INTLTOOL_PONG_RULE INTLTOOL_OAF_RULE INTLTOOL_PROP_RULE INTLTOOL_KEYS_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_DESKTOP_RULE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE USE_NLS DEFAULT_ARGV GLADE_PACKAGE_NAME GLADE_PACKAGE_DIR PIXMAPDIR AUTOSTARTDIR DEFAULT_CONFIGDIR GNOMELOCALEDIR GETTEXT_PACKAGE SYSCONFDIR BINDIR LIBDIR EGREP GREP CPP am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE ac_ct_CC CFLAGS CC am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CXX CPPFLAGS LDFLAGS CXXFLAGS CXX am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking enable_nls enable_wbar_config ' ac_precious_vars='build_alias host_alias target_alias CXX CXXFLAGS LDFLAGS LIBS CPPFLAGS CCC CC CFLAGS CPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR modules_CFLAGS modules_LIBS gui_modules_CFLAGS gui_modules_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures wbar 2.3.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/wbar] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of wbar 2.3.4:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-nls do not use Native Language Support --disable-wbar-config build without the GTK+ configuration interface Some influential environment variables: CXX C++ compiler command CXXFLAGS C++ compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CC C compiler command CFLAGS C compiler flags CPP C preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path modules_CFLAGS C compiler flags for modules, overriding pkg-config modules_LIBS linker flags for modules, overriding pkg-config gui_modules_CFLAGS C compiler flags for gui_modules, overriding pkg-config gui_modules_LIBS linker flags for gui_modules, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to the package provider. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF wbar configure 2.3.4 generated by GNU Autoconf 2.67 Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval "test \"\${$3+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_func # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval "test \"\${$3+set}\"" = set; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval "test \"\${$3+set}\"" = set; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval "test \"\${$3+set}\"" = set; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_mongrel # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval "test \"\${$3+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_compile cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by wbar $as_me 2.3.4, which was generated by GNU Autoconf 2.67. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5 ; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='wbar' VERSION='2.3.4' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 $as_echo_n "checking how to create a ustar tar archive... " >&6; } # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar plaintar pax cpio none' _am_tools=${am_cv_prog_tar_ustar-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do { echo "$as_me:$LINENO: $_am_tar --version" >&5 ($_am_tar --version) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && break done am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x ustar -w "$$tardir"' am__tar_='pax -L -x ustar -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H ustar -L' am__tar_='find "$tardir" -print | cpio -o -H ustar -L' am__untar='cpio -i -H ustar -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_ustar}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } rm -rf conftest.dir if test -s conftest.tar; then { echo "$as_me:$LINENO: $am__untar &5 ($am__untar &5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } grep GrepMe conftest.dir/file >/dev/null 2>&1 && break fi done rm -rf conftest.dir if test "${am_cv_prog_tar_ustar+set}" = set; then : $as_echo_n "(cached) " >&6 else am_cv_prog_tar_ustar=$_am_tool fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 $as_echo "$am_cv_prog_tar_ustar" >&6; } ac_config_headers="$ac_config_headers config.h" ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 $as_echo_n "checking whether the C++ compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C++ compiler cannot create executables See \`config.log' for more details" "$LINENO" 5 ; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 $as_echo_n "checking for C++ compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5 ; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5 ; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5 ; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi eval "prefix=$prefix" if test "$prefix" = "NONE" ; then eval "prefix=/usr" fi eval "exec_prefix=$prefix" eval "libdir=$libdir" eval "bindir=$bindir" eval "datadir=$datadir" eval "localedir=$localedir" eval "sysconfdir=$sysconfdir" LIBDIR=`eval echo $libdir` BINDIR=`eval echo $bindir` SHARE_DATADIR=`eval echo $datadir` LOCALEDIR=`eval echo $localedir` SYSCONFDIR=`eval echo $sysconfdir` GETTEXT_PACKAGE=wbar cat >>confdefs.h <<_ACEOF #define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" _ACEOF GNOMELOCALEDIR=$LOCALEDIR cat >>confdefs.h <<_ACEOF #define GNOMELOCALEDIR "$GNOMELOCALEDIR" _ACEOF DEFAULT_CONFIGDIR="$SYSCONFDIR/wbar.d" cat >>confdefs.h <<_ACEOF #define DEFAULT_CONFIGDIR "$DEFAULT_CONFIGDIR" _ACEOF AUTOSTARTDIR="$SYSCONFDIR/xdg/autostart" cat >>confdefs.h <<_ACEOF #define AUTOSTARTDIR "$AUTOSTARTDIR" _ACEOF PIXMAPDIR="$SHARE_DATADIR/pixmaps" cat >>confdefs.h <<_ACEOF #define PIXMAPDIR "$PIXMAPDIR" _ACEOF GLADE_PACKAGE_DIR="$SHARE_DATADIR/wbar/glade" cat >>confdefs.h <<_ACEOF #define GLADE_PACKAGE_DIR "$GLADE_PACKAGE_DIR" _ACEOF GLADE_PACKAGE_NAME="$GLADE_PACKAGE_DIR/wbar.glade" cat >>confdefs.h <<_ACEOF #define GLADE_PACKAGE_NAME "$GLADE_PACKAGE_NAME" _ACEOF DEFAULT_ARGV="--bpress --above-desk --vbar --pos right --isize 64 --idist 5 --nanim 4 --falfa 65" cat >>confdefs.h <<_ACEOF #define DEFAULT_ARGV "$DEFAULT_ARGV" _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } case "$am__api_version" in 1.01234) as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 ;; *) ;; esac if test -n ""; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= " >&5 $as_echo_n "checking for intltool >= ... " >&6; } INTLTOOL_REQUIRED_VERSION_AS_INT=`echo | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || as_fn_error $? "Your intltool is too old. You need intltool or later." "$LINENO" 5 fi # Extract the first word of "intltool-update", so it can be a program name with args. set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_UPDATE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE if test -n "$INTLTOOL_UPDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 $as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-merge", so it can be a program name with args. set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_MERGE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE if test -n "$INTLTOOL_MERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 $as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-extract", so it can be a program name with args. set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_EXTRACT in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT if test -n "$INTLTOOL_EXTRACT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 $as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' # Check the gettext tools to make sure they are GNU # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $XGETTEXT in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi XGETTEXT=$ac_cv_path_XGETTEXT if test -n "$XGETTEXT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGMERGE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MSGMERGE in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGMERGE=$ac_cv_path_MSGMERGE if test -n "$MSGMERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGFMT=$ac_cv_path_MSGFMT if test -n "$MSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL if test -n "$INTLTOOL_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 $as_echo "$INTLTOOL_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_PERL"; then as_fn_error $? "perl not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 $as_echo_n "checking for perl >= 5.8.1... " >&6; } $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 else IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 $as_echo "$IT_PERL_VERSION" >&6; } fi if test "x" != "xno-xml"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 $as_echo_n "checking for XML::Parser... " >&6; } if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } else as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : DATADIRNAME=share else DATADIRNAME=lib fi ;; *) DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in locale.h do : ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" if test "x$ac_cv_header_locale_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LOCALE_H 1 _ACEOF fi done if test $ac_cv_header_locale_h = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5 $as_echo_n "checking for LC_MESSAGES... " >&6; } if test "${am_cv_val_LC_MESSAGES+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return LC_MESSAGES ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_val_LC_MESSAGES=yes else am_cv_val_LC_MESSAGES=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5 $as_echo "$am_cv_val_LC_MESSAGES" >&6; } if test $am_cv_val_LC_MESSAGES = yes; then $as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h fi fi USE_NLS=yes gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default" if test "x$ac_cv_header_libintl_h" = x""yes; then : gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5 $as_echo_n "checking for ngettext in libc... " >&6; } if test "${gt_cv_func_ngettext_libc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !ngettext ("","", 1) ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_ngettext_libc=yes else gt_cv_func_ngettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5 $as_echo "$gt_cv_func_ngettext_libc" >&6; } if test "$gt_cv_func_ngettext_libc" = "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5 $as_echo_n "checking for dgettext in libc... " >&6; } if test "${gt_cv_func_dgettext_libc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !dgettext ("","") ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_dgettext_libc=yes else gt_cv_func_dgettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5 $as_echo "$gt_cv_func_dgettext_libc" >&6; } fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5 $as_echo_n "checking for bindtextdomain in -lintl... " >&6; } if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char bindtextdomain (); int main () { return bindtextdomain (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_bindtextdomain=yes else ac_cv_lib_intl_bindtextdomain=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5 $as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_ngettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5 $as_echo_n "checking for dgettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_dgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dgettext (); int main () { return dgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dgettext=yes else ac_cv_lib_intl_dgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5 $as_echo "$ac_cv_lib_intl_dgettext" >&6; } if test "x$ac_cv_lib_intl_dgettext" = x""yes; then : gt_cv_func_dgettext_libintl=yes fi fi fi if test "$gt_cv_func_dgettext_libintl" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5 $as_echo_n "checking if -liconv is needed to use gettext... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 $as_echo "" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_ngettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5 $as_echo_n "checking for dcgettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_dcgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dcgettext (); int main () { return dcgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dcgettext=yes else ac_cv_lib_intl_dcgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5 $as_echo "$ac_cv_lib_intl_dcgettext" >&6; } if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then : gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv else : fi else : fi fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then $as_echo "#define HAVE_GETTEXT 1" >>confdefs.h # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$MSGFMT" in /*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ac_cv_path_MSGFMT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" for ac_func in dcgettext do : ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext" if test "x$ac_cv_func_dcgettext" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DCGETTEXT 1 _ACEOF fi done MSGFMT_OPTS= { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5 $as_echo_n "checking if msgfmt accepts -c... " >&6; } cat >conftest.foo <<_ACEOF msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" _ACEOF if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5 ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } echo "$as_me: failed input was:" >&5 sed 's/^/| /' conftest.foo >&5 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in /*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ac_cv_path_XGETTEXT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : CATOBJEXT=.gmo DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : CATOBJEXT=.gmo DATADIRNAME=share else CATOBJEXT=.mo DATADIRNAME=lib fi ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi fi if test "$gt_cv_have_gettext" = "yes" ; then $as_echo "#define ENABLE_NLS 1" >>confdefs.h fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5 $as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po ac_config_commands="$ac_config_commands default-1" for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5 $as_echo_n "checking for catalogs to be installed... " >&6; } NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5 $as_echo "$LINGUAS" >&6; } fi if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for modules" >&5 $as_echo_n "checking for modules... " >&6; } if test -n "$modules_CFLAGS"; then pkg_cv_modules_CFLAGS="$modules_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2 x11\""; } >&5 ($PKG_CONFIG --exists --print-errors "imlib2 x11") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_modules_CFLAGS=`$PKG_CONFIG --cflags "imlib2 x11" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$modules_LIBS"; then pkg_cv_modules_LIBS="$modules_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2 x11\""; } >&5 ($PKG_CONFIG --exists --print-errors "imlib2 x11") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_modules_LIBS=`$PKG_CONFIG --libs "imlib2 x11" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then modules_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "imlib2 x11" 2>&1` else modules_PKG_ERRORS=`$PKG_CONFIG --print-errors "imlib2 x11" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$modules_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (imlib2 x11) were not met: $modules_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables modules_CFLAGS and modules_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables modules_CFLAGS and modules_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5 ; } else modules_CFLAGS=$pkg_cv_modules_CFLAGS modules_LIBS=$pkg_cv_modules_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi # Check whether --enable-wbar-config was given. if test "${enable_wbar_config+set}" = set; then : enableval=$enable_wbar_config; use_wbar_config=$enableval else use_wbar_config=yes fi if test "$use_wbar_config" = "yes"; then pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gui_modules" >&5 $as_echo_n "checking for gui_modules... " >&6; } if test -n "$gui_modules_CFLAGS"; then pkg_cv_gui_modules_CFLAGS="$gui_modules_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 libglade-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-2.0 libglade-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_gui_modules_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 libglade-2.0" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$gui_modules_LIBS"; then pkg_cv_gui_modules_LIBS="$gui_modules_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 libglade-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-2.0 libglade-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_gui_modules_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 libglade-2.0" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then gui_modules_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0 libglade-2.0" 2>&1` else gui_modules_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0 libglade-2.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$gui_modules_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gtk+-2.0 libglade-2.0) were not met: $gui_modules_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables gui_modules_CFLAGS and gui_modules_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables gui_modules_CFLAGS and gui_modules_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5 ; } else gui_modules_CFLAGS=$pkg_cv_gui_modules_CFLAGS gui_modules_LIBS=$pkg_cv_gui_modules_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi fi if test "$use_wbar_config" = "yes"; then WBAR_CONFIG_TRUE= WBAR_CONFIG_FALSE='#' else WBAR_CONFIG_TRUE='#' WBAR_CONFIG_FALSE= fi PIDOF_BIN="pidof " # Extract the first word of "pidof", so it can be a program name with args. set dummy pidof; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_PIDOF_BIN+set}" = set; then : $as_echo_n "(cached) " >&6 else case $PIDOF_BIN in [\\/]* | ?:[\\/]*) ac_cv_path_PIDOF_BIN="$PIDOF_BIN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PIDOF_BIN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_PIDOF_BIN" && ac_cv_path_PIDOF_BIN="pgrep" ;; esac fi PIDOF_BIN=$ac_cv_path_PIDOF_BIN if test -n "$PIDOF_BIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PIDOF_BIN" >&5 $as_echo "$PIDOF_BIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi cat >>confdefs.h <<_ACEOF #define PIDOF_BIN "$PIDOF_BIN " _ACEOF ac_config_files="$ac_config_files Makefile share/Makefile etc/Makefile etc/wbar.cfg etc/wbar.desktop.in pixmaps/Makefile po/Makefile.in doc/Makefile doc/man/Makefile doc/man/es/Makefile src/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi ac_config_commands="$ac_config_commands po/stamp-it" if test -z "${WBAR_CONFIG_TRUE}" && test -z "${WBAR_CONFIG_FALSE}"; then as_fn_error $? "conditional \"WBAR_CONFIG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by wbar $as_me 2.3.4, which was generated by GNU Autoconf 2.67. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ wbar config.status 2.3.4 configured by $0, generated by GNU Autoconf 2.67, with options \\"\$ac_cs_config\\" Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "share/Makefile") CONFIG_FILES="$CONFIG_FILES share/Makefile" ;; "etc/Makefile") CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;; "etc/wbar.cfg") CONFIG_FILES="$CONFIG_FILES etc/wbar.cfg" ;; "etc/wbar.desktop.in") CONFIG_FILES="$CONFIG_FILES etc/wbar.desktop.in" ;; "pixmaps/Makefile") CONFIG_FILES="$CONFIG_FILES pixmaps/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "doc/man/Makefile") CONFIG_FILES="$CONFIG_FILES doc/man/Makefile" ;; "doc/man/es/Makefile") CONFIG_FILES="$CONFIG_FILES doc/man/es/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 fi rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" >"po/stamp-it.tmp" sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r po/POTFILES } ' "po/Makefile.in" >"po/Makefile" rm -f "po/Makefile.tmp" mv "po/stamp-it.tmp" "po/stamp-it" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi if test -d po \ && test -e po/Makefile ; then echo "=======================================" echo "" echo "Execute make update-po" echo "" cd po make update-po | perl -ne 'print if /:$/' echo "" for file in $(ls *.po); do \ sed -i '/^\"POT-Creation-Date:.*\\n.*$/d' $file done cd .. echo "=======================================" fi wbar-2.3.4/make-conf.sh0000755000175000017500000000243612025755742014722 0ustar00sotosoto00000000000000#!/usr/bin/env bash CFGDIR=/tmp APPDIRS=(/usr/share/applications) ICONDIRS=(/usr/share/icons/hicolor /usr/share/pixmaps) MAXICONS=10 apps=$(find "${APPDIRS[@]}" -name '*.desktop' 2>/dev/null | xargs grep -l ^Name | xargs grep -l ^Icon | xargs grep -l ^Exec | xargs grep -l ^Type=Application | sort -R ) # print the dock background settings cat > "$CFGDIR/wbar.cfg" <<-EOF i: /usr/local/share/pixmaps/wbar/dock.png c: wbar --bpress --above-desk --isize 64 --idist 5 --nanim 3 --pos bottom t: /usr/share/fonts/TTF/UbuntuMono-B/12 EOF for app in $apps; do _name=$(grep ^Name= $app | sed 's/^.*=//') _exec=$(grep ^Exec= $app | sed 's/^.*=//') _icon=$(grep ^Icon= $app | sed 's/^.*=//') icons=$(find "${ICONDIRS[@]}" | grep -i "${_icon}") # get the biggest resolution icon for size in 128 64 48; do for icon in $icons; do if [[ "$icon" =~ $size ]] && [ -f "$icon" ]; then selected_icon="$icon" break 2 fi done done if [ -s "$selected_icon" ]; then grep -q $(basename $selected_icon) "$CFGDIR/wbar.cfg" && continue cat >> "$CFGDIR/wbar.cfg" <<-EOF i: $selected_icon c: $_exec t: $(echo $_name | sed 's/[^ a-zA-Z0-9.-]/./g') EOF fi [ $((MAXICONS--)) -le 1 ] && break done # vim: set sw=2 sts=2 : # wbar-2.3.4/configure.ac0000644000175000017500000000601712027635216015003 0ustar00sotosoto00000000000000dnl make yadickson soto AC_INIT([wbar], [2.3.4]) AM_INIT_AUTOMAKE([ filename-length-max=256 tar-ustar ]) AM_CONFIG_HEADER(config.h) AC_CONFIG_MACRO_DIR([m4]) AC_PROG_CXX AC_PROG_INSTALL AC_HEADER_STDC eval "prefix=$prefix" if test "$prefix" = "NONE" ; then eval "prefix=/usr" fi eval "exec_prefix=$prefix" eval "libdir=$libdir" eval "bindir=$bindir" eval "datadir=$datadir" eval "localedir=$localedir" eval "sysconfdir=$sysconfdir" LIBDIR=`eval echo $libdir` BINDIR=`eval echo $bindir` SHARE_DATADIR=`eval echo $datadir` LOCALEDIR=`eval echo $localedir` SYSCONFDIR=`eval echo $sysconfdir` AC_SUBST(LIBDIR) AC_SUBST(BINDIR) AC_SUBST(SYSCONFDIR) AC_SUBST(GETTEXT_PACKAGE, [AC_PACKAGE_NAME]) AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE" , [ The gettext package ]) AC_SUBST(GNOMELOCALEDIR, $LOCALEDIR) AC_DEFINE_UNQUOTED(GNOMELOCALEDIR, "$GNOMELOCALEDIR" , [ The gettext package dir ]) AC_SUBST(DEFAULT_CONFIGDIR, "$SYSCONFDIR/AC_PACKAGE_NAME.d") AC_DEFINE_UNQUOTED(DEFAULT_CONFIGDIR, "$DEFAULT_CONFIGDIR" , [ The default config dir ]) AC_SUBST(AUTOSTARTDIR, "$SYSCONFDIR/xdg/autostart") AC_DEFINE_UNQUOTED(AUTOSTARTDIR, "$AUTOSTARTDIR" , [ The autostart dir ]) AC_SUBST(PIXMAPDIR, "$SHARE_DATADIR/pixmaps") AC_DEFINE_UNQUOTED(PIXMAPDIR, "$PIXMAPDIR" , [ The pixmaps dir ]) AC_SUBST(GLADE_PACKAGE_DIR, "$SHARE_DATADIR/AC_PACKAGE_NAME/glade") AC_DEFINE_UNQUOTED(GLADE_PACKAGE_DIR, "$GLADE_PACKAGE_DIR" , [ The glade package dir ]) AC_SUBST(GLADE_PACKAGE_NAME, "$GLADE_PACKAGE_DIR/AC_PACKAGE_NAME.glade") AC_DEFINE_UNQUOTED(GLADE_PACKAGE_NAME, "$GLADE_PACKAGE_NAME" , [ The glade package name ]) AC_SUBST(DEFAULT_ARGV, "--bpress --above-desk --vbar --pos right --isize 64 --idist 5 --nanim 4 --falfa 65") AC_DEFINE_UNQUOTED(DEFAULT_ARGV, "$DEFAULT_ARGV" , [ The default argv ]) AC_PROG_INTLTOOL() AM_GLIB_GNU_GETTEXT PKG_PROG_PKG_CONFIG PKG_CHECK_MODULES(modules, [imlib2 x11]) AC_SUBST(modules_CFLAGS) AC_SUBST(modules_LIBS) AC_ARG_ENABLE(wbar-config, AS_HELP_STRING([--disable-wbar-config], [build without the GTK+ configuration interface]),[use_wbar_config=$enableval], [use_wbar_config=yes]) if test "$use_wbar_config" = "yes"; then PKG_CHECK_MODULES(gui_modules, [gtk+-2.0 libglade-2.0]) AC_SUBST(gui_modules_CFLAGS) AC_SUBST(gui_modules_LIBS) fi AM_CONDITIONAL([WBAR_CONFIG],[test "$use_wbar_config" = "yes"]) AC_SUBST(PIDOF_BIN, "pidof ") AC_PATH_PROG(PIDOF_BIN, pidof, pgrep) AC_DEFINE_UNQUOTED(PIDOF_BIN, "$PIDOF_BIN ", [ program to retreive wbar pid ]) AC_CONFIG_FILES([Makefile \ share/Makefile \ etc/Makefile \ etc/wbar.cfg \ etc/wbar.desktop.in \ pixmaps/Makefile \ po/Makefile.in \ doc/Makefile doc/man/Makefile doc/man/es/Makefile src/Makefile]) AC_OUTPUT if test -d po \ && test -e po/Makefile ; then echo "=======================================" echo "" echo "Execute make update-po" echo "" cd po make update-po | perl -ne 'print if /:$/' echo "" for file in $(ls *.po); do \ sed -i '/^\"POT-Creation-Date:.*\\n.*$/d' $file done cd .. echo "=======================================" fi wbar-2.3.4/NEWS0000644000175000017500000000155612027635251013216 0ustar00sotosoto0000000000000017/09/2012 add support for bash completion 19/12/2010 fixed solution to the problem of image non-existent location 19/12/2010 fixed solution to the problem of font non-existent location 19/12/2010 new application structure 26/09/2007 fixed cleaning buffer not being initialized that made the wbar get a SIGBUS on bsd 26/09/2007 fixed symlink issue not being replaced and avoiding instalation 10/09/2007 fixed font symlink pointing wronlgy on installation 09/09/2007 added a patch to hide wbar ... doesnt come applied cause it's got some visual issues: * needs -balfa 0 to look pretty * needs to be at the bottom or vertical left 02/07/2007 added expansion animation when entering / leaving the bar 01/07/2007 improved background cleaning 10/01/2007 fixed a bug that made wbar eat cpu under some situations. 10/01/2007 added support for animating more than 3 icons. wbar-2.3.4/missing0000755000175000017500000002623312027635256014122 0ustar00sotosoto00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: wbar-2.3.4/config.h.in0000644000175000017500000000455112027635262014542 0ustar00sotosoto00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* The autostart dir */ #undef AUTOSTARTDIR /* The default argv */ #undef DEFAULT_ARGV /* The default config dir */ #undef DEFAULT_CONFIGDIR /* always defined to indicate that i18n is enabled */ #undef ENABLE_NLS /* The gettext package */ #undef GETTEXT_PACKAGE /* The glade package dir */ #undef GLADE_PACKAGE_DIR /* The glade package name */ #undef GLADE_PACKAGE_NAME /* The gettext package dir */ #undef GNOMELOCALEDIR /* Define to 1 if you have the `bind_textdomain_codeset' function. */ #undef HAVE_BIND_TEXTDOMAIN_CODESET /* Define to 1 if you have the `dcgettext' function. */ #undef HAVE_DCGETTEXT /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define if your file defines LC_MESSAGES. */ #undef HAVE_LC_MESSAGES /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* program to retreive wbar pid */ #undef PIDOF_BIN /* The pixmaps dir */ #undef PIXMAPDIR /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION wbar-2.3.4/README0000644000175000017500000000713612027635251013377 0ustar00sotosoto00000000000000=================== wbar =================== SUMMARY 1. License 2. Dependencies 3. General 4. Installation 5. Configuration 5.1. Wbar-config (recommended) 5.2. make-conf.sh 5.3. Manual method 6. Bugs -------------------- 1. LICENSE ---------- Wbar by Rodolfo Granata Copyright (C) 2012 warlock.cc@gmail.com Wbar and wbar-config by Yadickson Soto Copyright (C) 2010 yadickson@gmail.com Wbar is under GNU GPL license. Please, read the 'COPYING' to know what this means. It'll be greatly appreciated if you mail the author (warlock) telling about any changes, patches, recommendations, etc. Thanks 2. DEPENDENCIES --------------- libimlib2-dev, intltool, pkg-config, libglade2-dev, libgtk2.0-dev, libx11-dev 3. GENERAL ---------- Wbar is a quick launch bar. It's fast, light and cool eye-candy. It's hacked in c++ trying to keep code as readable as possible without sacrificing speed. It works directly on top of X to avoid going through a lot of layers. Initially it was developed for Fluxbox, then tested on WindowMaker, Xfce, and Gnome 2 and it works very well with other window managers, too. Since version 1.0 Wbar can run on top of desktops such as xfdesktop or Nautilus with the -above-desk switch. 4. INSTALLATION (for the impatient) --------------- $ ./configure --prefix=/usr --exec_prefix=/usr --sysconfdir=/etc or disable wbar-config $ ./configure --prefix=/usr --exec_prefix=/usr --sysconfdir=/etc --disable-wbar-config $ make As root # make install $ wbar --help (this gives you important options) 5. CONFIGURATION ---------------- 5.1. Wbar-config Wbar-config is the recommended tool to customize Wbar. It is completely optional but very easy to use. You can tweak the icon size and distance, adjust Wbar's position on the screen and also change effects like transparency, color filter and jump factor. See also wbar(1) and wbar-config(1). 5.2. make-conf.sh If you don't want to install a GUI application to configure Wbar, the next best solution to create an initial wbar.cfg would be the make-conf.sh script. The script searches for installed desktop files in /usr/share/applications and creates an initial config in /tmp with the corresponding icons in your pixmaps and hicolor directories in /usr/share. Just copy the config file to ~/.wbar and you're set. 5.3. Manual method Wbar will look for your configuration in $HOME/.wbar first or will use the global configuration file in /etc/wbar.d/wbar.cfg. .wbar format: --------------- Commented lines start whith #. Blank lines are ignored. Example: Each icon has the following format: i: c: t: The order of appearance doesn't matter but all 3 of these lines must appear. If you aren't gonna display text nor have a command associated for a certain icon you should do the following: i: c: t: The first icon definition has a special meaning: ------------------------------------------------ i: c: wbar --bpress --above-desk --vbar --pos right --isize 64 --idist 5 --nanim 4 --falfa 65 t: IF A FONT ISN'T SUPPLIED THEN NO TEXT RENDERING IS DONE. ******************* Notes: ------ If you're getting window decorations (you shouldn't) when you start your window manager because you're using the -above-desk switch, try to give the WM some time to start up before wbar does. Example (in your startup script): (sleep 5s && wbar) & Note that the parenthesis surrounding the command are important. BUGS ---- Use the issue tracker. :-) Fix them man! I need a hand to keep this alive. wbar-2.3.4/ChangeLog0000644000175000017500000000226012027635251014262 0ustar00sotosoto00000000000000wbar (2.3.1) * Apply suggestions from Markus to ease Debian packaging. -- Rodolfo (25-08-2012) wbar (2.1.1) * Se da solución a falla de filtro de color. (Closed: #36) -- Yadickson Soto (11-01-2011) wbar (2.1.0) * Se da solución a carga de iconos no encontrados. * Se agregan nuevos iconos a la aplicación. (Closed: #31) -- Yadickson Soto (10-01-2011) wbar (2.0.2) * Se da solución a problema de compilación. (Closed: #35) * Se agrega funcionalidad de filtro de color en wbar-config. (Closed: #36) -- Yadickson Soto (10-01-2011) wbar (2.0.1) * Se da solución a problema de internacionalización de wbar. -- Yadickson Soto (07-01-2011) wbar (2.0.0) * Nueva estructura. * Se incorpora configurador de la aplicacion. * Se eliminan iconos de aplicaciones lo libres. * Se agrega icono de proyecto. * Se da solución a problema de carga de fuente no ubicada. * Se incorpora desplazamiento de la barra al borde. * Se incorpora funcionalida de no recarga de la barra por click derecho. -- Yadickson Soto (05-01-2011) wbar-2.3.4/AUTHORS0000644000175000017500000000016712027635251013564 0ustar00sotosoto00000000000000warlock (Rodolfo Granata) 2006-2012 yadickson (Yadickson Soto) 2010 wbar-2.3.4/src/0000755000175000017500000000000012027635465013306 5ustar00sotosoto00000000000000wbar-2.3.4/src/core/0000755000175000017500000000000012027635465014236 5ustar00sotosoto00000000000000wbar-2.3.4/src/core/XWin.h0000644000175000017500000000325311745663763015307 0ustar00sotosoto00000000000000#ifndef _XWIN_H_ #define _XWIN_H_ /* X11 stuff */ #include #include class Bar; class SuperBar; class XWin { private: Display *display; Visual *visual; Window window; Window taskWindow; Atom delWindow; Colormap colormap; int depth; int eventMask; int rootEventMask; int x, y; int w, h; friend class Bar; friend class SuperBar; public: XWin(int x, int y, int w, int h); ~XWin(); void selectInput(int mask, int taskbar_set); void mapWindow(); void unMapWindow(); void lowerWindow(); void raiseWindow(); bool nextEvent(XEvent *ev); void setName(char *name); int screenWidth() const; int screenHeight() const; Display *getDisplay(); Visual *getVisual(); Window getDrawable(); Colormap getColormap(); void moveNresize(int x, int y, int w, int h); void setOverrideRedirection(Bool ovr = True); void noDecorations(); void setDockWindow(); void setSticky(); void skipTaskNPager(); void bottomLayer(); void doFlush(); char *atomName(Atom atomname); unsigned char *windowProp(Window *targetWin, const char *reqProp, unsigned long *len); Atom issetHint(Window targetWin, const char *reqProp, const char *reqHint); Atom *haveAtom(Window targetWin, const char *reqProp); unsigned char *windowIcon(Window targetWin, int *iw, int *ih); void windowAction(unsigned long winid); void windowIconify(unsigned long winid); int windowFocused(); void selectWindowInput(unsigned long winid); void flushAll(); }; Pixmap GetRootPixmap (Display *display); #endif /* _XWIN_H_ */ wbar-2.3.4/src/core/ImgWrap.h0000644000175000017500000000315411667227666015771 0ustar00sotosoto00000000000000#ifndef _IMGWRAP_H_ #define _IMGWRAP_H_ #include #include #define _image Imlib_Image #define _font Imlib_Font #define SET_BLEND(x) \ imlib_context_set_blend(x) #define LOAD_IMAGE(path) \ imlib_load_image(path) #define USE_IMAGE(x) \ imlib_context_set_image(x) #define IMAGE_WIDTH() \ imlib_image_get_width() #define IMAGE_HEIGHT() \ imlib_image_get_height() #define IMAGE_TRANSPOSE() \ imlib_image_flip_diagonal() #define IMAGE_ENABLE_ALPHA(x) \ imlib_image_set_has_alpha(x) #define FREE_IMAGE(x) \ do{ imlib_context_set_image(x); \ imlib_free_image(); }while(0) #define USE_DRAWABLE(x) \ imlib_context_set_drawable(x) #define IMAGE_FROM_DRAWABLE(x, y, w, h) \ imlib_create_image_from_drawable(0, x, y, w, h, 1) #define CLONE_IMAGE() \ imlib_clone_image() #define CREATE_IMAGE(w, h) \ imlib_create_image(w, h) #define BLEND_IMAGE(img, sx, sy, sw, sh, dx, dy, dw, dh) \ imlib_blend_image_onto_image(img, 0, sx, sy, sw, sh, dx, dy, dw, dh) #define RENDER_TO_DRAWABLE(x, y) \ imlib_render_image_on_drawable(x, y) #define INIT_IMLIB(disp, vis, cm, draw, cache) \ do{ imlib_context_set_display(disp); \ imlib_context_set_visual(vis); \ imlib_context_set_colormap(cm); \ imlib_context_set_drawable(draw); \ imlib_set_cache_size(cache); }while(0) #define ADD_FONT_PATH(x) \ imlib_add_path_to_font_path(x) #define LOAD_FONT(x) \ imlib_load_font(x) #define USE_FONT(x) \ imlib_context_set_font(x) #define FREE_FONT(x) \ do{ imlib_context_set_font(x); \ imlib_free_font(); }while(0) #endif /* _IMGWRAP_H_ */ wbar-2.3.4/src/core/Bar.cc0000644000175000017500000004040711745663763015266 0ustar00sotosoto00000000000000#include #include #include #include "Bar.h" #include "i18n.h" #include /* Posicionamiento de la ventana */ #define MARGEN 4 extern unsigned long bg_window; using namespace std; static XErrorHandler oldXHandler = (XErrorHandler) 0 ; static int rootErrorHandler(Display *display, XErrorEvent *theEvent); /* Bar Constructor & Destructor */ Bar::Bar(XWin *win, string barImg, int iSize, int iDist, float zFactor, float jFactor, int bOrient, int bPosition, int nAnim, int offset, bool grow) : /* Initialization */ buffer(0), cleaning_buffer(0), barback(0), bar(0), window(win), icon_dist(iDist), icon_size(iSize), icon_anim(nAnim), jump_factor(jFactor), zoom_factor(zFactor), orientation(bOrient), position(bPosition), zoomed_icon(-1), focused(1) { this->bOffset = offset; this->grow = grow; /* Load Bar back ground */ if (!(bar = LOAD_IMAGE(barImg.c_str()))) throw(barImg + _(" Image not found. Maybe using a relative path?")).c_str(); /* Get Bar Dimensions */ USE_IMAGE(bar); owidth = IMAGE_WIDTH(); oheight = IMAGE_HEIGHT(); if (orientation == 1) IMAGE_TRANSPOSE(); /* Enable Bar's alpha channel */ IMAGE_ENABLE_ALPHA(1); /* set bar initial values */ scale(); } Bar::~Bar() { if (buffer)FREE_IMAGE(buffer); if (barback)FREE_IMAGE(barback); if (bar)FREE_IMAGE(bar); if (cleaning_buffer)FREE_IMAGE(cleaning_buffer); while (!icons.empty()) { delete icons.back(); icons.pop_back(); } } /*}}}*/ /* Add Icon */ void Bar::addIcon(string path, string comm, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size) { icons.push_back(new Icon(path, comm, (int)icon_offset + icon_size/2 + icons.size() * icon_unit, // x coord y + (int)(0.125 * icon_size), // y coord winid, icondata, iw, ih, refl_size)); } /*}}}*/ /* Scale bar */ void Bar::scale(bool updateBG) { float up_growth, dn_growth, b_scl_c; /* unit icon */ icon_unit = (icon_size + icon_dist); /* icons on side */ icon_ansd = (icon_anim-1)/2; /* icon offset constant */ icon_offset = icon_ansd * ((zoom_factor>1)?(zoom_factor-1) : 0.5) * icon_unit; /* Icon scaling constant */ b_dd = (zoom_factor>1)? (zoom_factor-1)*icon_unit : zoom_factor*icon_unit; // x0 = (a + (icon_anim + 1)/2) * icon_unit; // x1 = (a - (icon_anim - 1)/2) * icon_unit; // xm = (a + 0.5) * icon_unit; #ifdef COS_ZOOM b_scl_b = 3.14159 / icon_unit / icon_anim; #else /* Estos calculos de escala son en base a la funcion sigmoidea f = 1/(1+exp(a+bx^2))*/ b_scl_c = 0.01; // mientras mas cercano a 0 mas se desplaza chico b_scl_d = 0.20; // mientras mas cercano a 1 mas se desplaza grande -> si quiero pico lo achico b_scl_a = logf((1.0-b_scl_d)/b_scl_d); //b_scl_b = (logf((1.0-b_scl_c)/b_scl_c) - b_scl_a)/(x0-xm)^2; b_scl_b = 4*(logf((1.0-b_scl_c)/b_scl_c) - b_scl_a)/ (icon_anim*icon_anim*icon_unit*icon_unit); #endif #ifdef LINEAR_TRASL //float m = (icon_anim-1)*b_dd / (x1 - x0); b_pos_m = -icon_ansd * 2 * b_dd / icon_unit / icon_anim; #else b_pos_m = - 3.14159 / icon_unit / icon_anim; #endif /* bar dimensions */ width = icon_unit * (icons.size() + 1) - 2 * icon_dist; height=(int)(icon_size * 1.25); /* Space needed for growing */ up_growth = jump_factor*icon_size*(zoom_factor-1); dn_growth = icon_size*(zoom_factor-1) - up_growth; /* substract growth superposed on bar */ up_growth-= icon_size*0.125; dn_growth-= icon_size*0.125; /* Set new window width */ window->w = (int)(width + 2*icon_offset); window->h = height + 2*MARGEN + (int)((up_growth>0.0? up_growth : 0.0))+ (int)((dn_growth>0.0? dn_growth : 0.0)); /* Initial Bar position */ if(!grow) { y = MARGEN + (int)(up_growth>0.0? up_growth : 0.0); } else { y = MARGEN; } x = (int)icon_offset; if (updateBG) acquireBack(); } /*}}}*/ /* Acquire background */ void Bar::acquireBack() { int t_w, t_h; t_w = (orientation == 0)? window->w : window->h; t_h = (orientation == 0)? window->h : window->w; /* Update win x && y for getting root img */ switch (position) { case 1: // bottom case 2: // top case 5: // center window->x = (window->screenWidth() - t_w)/2; break; case 3: // left case 7: // bot-left case 9: // top-left window->x = bOffset; break; case 4: // rigth case 6: // bot-rigth case 8: // top-rigth window->x = window->screenWidth() - t_w - bOffset; break; } switch (position) { case 3: // left case 4: // rigth case 5: // center window->y = (window->screenHeight() - t_h)/2; break; case 1: // bottom case 6: // bot-right case 7: // bot-left window->y = window->screenHeight() - t_h - bOffset; break; case 2: // top case 8: // top-right case 9: // top-left window->y = bOffset; break; } /*}}}*/ /* Move & resize win for fitting new icons */ window->moveNresize(window->x, window->y, t_w, t_h); if (barback) FREE_IMAGE(barback); if (buffer) FREE_IMAGE(buffer); buffer = CREATE_IMAGE(t_w, t_h); /* Get background Image */ // with KDM->IceWM and the like, root windown may be readable by root only // if no wallpaper is set. Just proceed with no background then oldXHandler = XSetErrorHandler(rootErrorHandler); Pixmap rootmap = GetRootPixmap(window->display); // for DEs using an FM-based desktop, set it as bg source if (bg_window) { USE_DRAWABLE((Window)bg_window); // otherwise, snapshot a backgroung pixmap set at the root window } else if (rootmap != None) { USE_DRAWABLE(rootmap); } else { // last resort: snaphsot the whole display, potentially resulting in // some artifacts from the windows above the bar USE_DRAWABLE(DefaultRootWindow(window->display)); } barback = IMAGE_FROM_DRAWABLE(window->x, window->y, t_w, t_h); USE_DRAWABLE(window->window); (void) XSetErrorHandler(oldXHandler); } /*}}}*/ /* Icons Scaling */ void Bar::transform(int mousex) { #ifdef LINEAR_TRASL int x0 = (icon_ansd+1) * icon_unit; // last movable pos #endif int xx = mousex + (int)(icon_offset + icon_size/2); int rx = mousex - icon_unit/2; int i_num = mousex / icon_unit; int t_x, t_y, a; Icon *cur_ic=0; zoomed_icon = -1 ; #ifdef LINEAR_TRASL for (a=0; a<(int)icons.size(); a++, rx -= icon_unit, x0 += icon_unit) { #else for (a=0; a<(int)icons.size(); a++, rx -= icon_unit) { #endif cur_ic = icons[a]; /* Check if over the icon */ if (zoomed_icon == -1) if (xx >= cur_ic->x && xx < cur_ic->x + cur_ic->size) zoomed_icon = a; if (((a icon_ansd) { t_x = (int)(cur_ic->ox + ((aoy; if (cur_ic->size != icon_size || cur_ic->x != t_x || cur_ic->y != t_y) { cur_ic->cx = cur_ic->x; cur_ic->csize = cur_ic->size; cur_ic->size = icon_size; cur_ic->x = t_x; cur_ic->y = t_y; cur_ic->need_update = 1; } } else { cur_ic->cx = cur_ic->x; cur_ic->csize = cur_ic->size; #ifdef COS_ZOOM cur_ic->size = (int)(icon_size * (1.0 + (zoom_factor-1.0)*cosf(b_scl_b * rx))); #else cur_ic->size = (int)(icon_size * (1.0 + (zoom_factor-1.0)/(1.0 + expf(b_scl_a + b_scl_b*rx*rx))/b_scl_d)); #endif #ifdef LINEAR_TRASL cur_ic->x = cur_ic->ox - (int)(icon_ansd * b_dd - b_pos_m * (mousex - x0)); #else cur_ic->x = cur_ic->ox + (int)(icon_ansd * b_dd * sinf(b_pos_m * rx)); #endif if(!grow) { cur_ic->y = cur_ic->oy - (int)(jump_factor*(cur_ic->size-icon_size)); } else { cur_ic->y = cur_ic->oy; } cur_ic->need_update = 1; } } } /*}}}*/ /* Clean the Bar */ void Bar::cleanBack() { Icon *cur_ic, *next_ic; USE_IMAGE(buffer); SET_BLEND(0); for (size_t a=0; aneed_update == 0) continue; /* force next icons redraw if stepped on them */ for (size_t b=a+1; bneed_update == 1) continue; if (cur_ic->cx + cur_ic->csize >= next_ic->x) { next_ic->cx = next_ic->x; next_ic->csize = next_ic->csize; next_ic->need_update = 1; } else break; } /* Copy Root Background */ if (orientation == 0) BLEND_IMAGE(cleaning_buffer, cur_ic->cx, 0, cur_ic->csize, window->h, cur_ic->cx, 0, cur_ic->csize, window->h); else BLEND_IMAGE(cleaning_buffer, 0, cur_ic->cx, window->h, cur_ic->csize, 0, cur_ic->cx, window->h, cur_ic->csize); } } void Bar::drawBack() { if (cleaning_buffer) FREE_IMAGE(cleaning_buffer); USE_IMAGE(buffer); /* Copy Root Background */ SET_BLEND(0); if (orientation == 0) { BLEND_IMAGE(barback, 0, 0, window->w, window->h, 0, 0, window->w, window->h); /* Blend the bar */ SET_BLEND(1); BLEND_IMAGE(bar, 0, 0, owidth, oheight, x, y, width, height); } else { BLEND_IMAGE(barback, 0, 0, window->h, window->w, 0, 0, window->h, window->w); /* Blend the bar */ SET_BLEND(1); BLEND_IMAGE(bar, 0, 0, oheight, owidth, y, x, height, width); } cleaning_buffer = CLONE_IMAGE(); } /*}}}*/ /* Render the Bar */ void Bar::render() { Icon *cur_ic=0; /* Set work area */ USE_IMAGE(buffer); SET_BLEND(1); /* Blend the zoomed icon last */ if (zoomed_icon != -1) { cur_ic = icons.back(); icons.back() = icons[zoomed_icon]; icons[zoomed_icon] = cur_ic; } /* Blend Icons */ for (size_t a=0; a blend it */ if (cur_ic->need_update == 1) { cur_ic->need_update = 0; if (orientation == 0) BLEND_IMAGE(cur_ic->icon, 0, 0, cur_ic->osize, cur_ic->osize, cur_ic->x, cur_ic->y, cur_ic->size, cur_ic->size); else BLEND_IMAGE(cur_ic->icon, 0, 0, cur_ic->osize, cur_ic->osize, cur_ic->y, cur_ic->x, cur_ic->size, cur_ic->size); } } if (zoomed_icon != -1) { cur_ic = icons.back(); icons.back() = icons[zoomed_icon]; icons[zoomed_icon] = cur_ic; } /* Show the buffer */ SET_BLEND(0); RENDER_TO_DRAWABLE(0, 0); } /*}}}*/ /* Refresh */ void Bar::refresh(int mouse_x) { /* Relative coords */ mouse_x -= (int)(icon_offset + icon_size/2.0); /* on the bar */ if (mouse_x > 0 && mouse_x < (int)icons.size() * icon_unit) { transform(mouse_x); if (!focused) focus(); cleanBack(); /* out of the bar */ } else if (focused) unfocus(); render(); } /*}}}*/ /* Refresh the bar not having cursor focus*/ void Bar::refreshUnfocused(int mouse_x) { /* Relative coords */ mouse_x -= (int)(icon_offset + icon_size/2.0); unfocus(); render(); } /*}}}*/ /* In & out of the bar */ inline void Bar::unfocus() { focused = 0; x = (int)icon_offset; width = (int)(window->w - 2*icon_offset); zoomed_icon = -1; drawBack(); #ifndef NO_EXPAND expand(true); #endif } inline void Bar::focus() { focused = 1; x=0; width = window->w; drawBack(); #ifndef NO_EXPAND expand(false); #endif } #ifndef NO_EXPAND void Bar::expand(bool inverse) { Icon *cur_ic=0; /* animation time in ms */ int t=0, anim_time = 80; struct timeval tv0, tv; if (inverse) for (size_t i = 0; ivx = -(cur_ic->x - cur_ic->ox) / (float)anim_time; cur_ic->vy = -(cur_ic->y - cur_ic->oy) / (float)anim_time; cur_ic->vs = -(cur_ic->size - icon_size) / (float)anim_time; cur_ic->bx = cur_ic->x; cur_ic->by = cur_ic->y; cur_ic->bs = cur_ic->size; } else for (size_t i = 0; ivx = (cur_ic->x - cur_ic->ox) / (float)anim_time; cur_ic->vy = (cur_ic->y - cur_ic->oy) / (float)anim_time; cur_ic->vs = (cur_ic->size - icon_size) / (float)anim_time; cur_ic->bx = cur_ic->ox; cur_ic->by = cur_ic->oy; cur_ic->bs = icon_size; } gettimeofday(&tv0, NULL); while (t < anim_time) { gettimeofday(&tv, NULL); t = (int)((tv.tv_sec - tv0.tv_sec) * 1000 + (tv.tv_usec - tv0.tv_usec)/1000); /* Printing t here can tell you the max system responsiveness */ if (t > anim_time) t = anim_time; for (size_t j = 0; j< icons.size(); j++) { cur_ic = icons[j]; cur_ic->cx = cur_ic->x; cur_ic->csize = cur_ic->size; cur_ic->x = cur_ic->bx + (int)(t * cur_ic->vx); cur_ic->y = cur_ic->by + (int)(t * cur_ic->vy); cur_ic->size = cur_ic->bs + (int)(t * cur_ic->vs); cur_ic->need_update = 1; } cleanBack(); render(); } } #endif /*}}}*/ /* Icon press / release events */ inline void Bar::iconPress(int i_num, int offs) { Icon *cur_ic; if (i_num<0 || i_num>=(int)icons.size()) return; cur_ic = icons[i_num]; cur_ic->cx = cur_ic->x; cur_ic->csize = cur_ic->size; cur_ic->x += offs; cur_ic->y += offs; cur_ic->need_update = 1; cleanBack(); render(); } void Bar::iconUp(int i_num) { iconPress(i_num, -2); } void Bar::iconDown(int i_num) { iconPress(i_num, 2); } /*}}}*/ /* Position the Bar */ void Bar::setPosition(string pos) { if (!pos.compare("bottom")) position = 1; else if (!pos.compare("top")) position = 2; else if (!pos.compare("left")) position = 3; else if (!pos.compare("right")) position = 4; else if (!pos.compare("center")) position = 5; else if (!pos.compare("bot-right")) position = 6; else if (!pos.compare("bot-left")) position = 7; else if (!pos.compare("top-right")) position = 8; else if (!pos.compare("top-left")) position = 9; else { std::cout << _("Invalid bar position.") << " " << pos << std::endl; std::cout << _("Set default bar position.") << std::endl; position = 4; } acquireBack(); } /*}}}*/ /* Icon info */ string Bar::iconCommand(int i_num) { if (i_num<0 || i_num>=(int)icons.size()) return NULL; return icons[i_num]->command; } unsigned long Bar::iconWinId(int i_num) { if (i_num<0 || i_num>=(int)icons.size()) return 0; return icons[i_num]->wid; } int Bar::iconsShown() { return (int)icons.size(); } int Bar::iconIndex(int mousex) { Icon *cur_ic; for (int a=0; a<(int)icons.size(); a++) { cur_ic = icons[a]; /* Check if over the icon */ if (mousex >= cur_ic->x && mousex < cur_ic->x + cur_ic->size) return a; } return -1; } /*}}}*/ #if 0 /* Zoom beans */ void Bar::setZoom(float zoomf) { b_zoom_f = zoomf; scale(false); } float Bar::getZoom() { return b_zoom_f; } /*}}}*/ #endif static int rootErrorHandler(Display *display, XErrorEvent *theEvent) { if (theEvent->error_code == 9 && theEvent->request_code == 14) { std::cout << "root window is readable by root only" << std::endl; std::cout << "you may work around that by setting a wallpaper" << std::endl; } std::cout << "error code:" << (int) theEvent->error_code << " request code:" << (int) theEvent->request_code << std::endl; return 0; } wbar-2.3.4/src/core/SuperIcon.h0000644000175000017500000000073211724152440016306 0ustar00sotosoto00000000000000#ifndef _SUPERICON_H_ #define _SUPERICON_H_ #include "ImgWrap.h" #include "Icon.h" class SuperBar; class SuperIcon : public Icon{ protected: _image icon_color; int textW, textH; std::string text; friend class SuperBar; public: SuperIcon(std::string iconImg, std::string cmd, std::string txt, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size, int x, int y, int tw, int th); ~SuperIcon(); }; #endif /* _SUPERICON_H_ */ wbar-2.3.4/src/core/Icon.h0000644000175000017500000000126711724152440015273 0ustar00sotosoto00000000000000#ifndef _ICON_H_ #define _ICON_H_ #include #include "ImgWrap.h" class Bar; class SuperBar; class Icon { protected: _image icon; /* normal state */ int ox, oy; int osize; /* current state */ int x, y; int size; int bs, bx, by; float vx, vs, vy; /* redraw ? */ int need_update; /* clean coords */ int cx, csize; std::string command; unsigned long wid; /* extend friendship? */ friend class Bar; friend class SuperBar; public: Icon(std::string iconImg, std::string cmd, int x, int y, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size); ~Icon(); }; #endif /* _ICON_H_ */ wbar-2.3.4/src/core/SuperIcon.cc0000644000175000017500000000071211724152440016442 0ustar00sotosoto00000000000000#include #include "SuperIcon.h" using namespace std; SuperIcon::SuperIcon(string iconImg, string cmd, string txt, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size, int x, int y, int tw, int th) : Icon(iconImg, cmd, x, y, winid, icondata, iw, ih, refl_size), textW(tw), textH(th), text(txt){ USE_IMAGE(icon); icon_color = CLONE_IMAGE(); } SuperIcon::~SuperIcon(){ FREE_IMAGE(icon_color); } wbar-2.3.4/src/core/Icon.cc0000644000175000017500000000402011742350241015416 0ustar00sotosoto00000000000000#include "Icon.h" #include "i18n.h" #include using namespace std; _image icontmp; Icon::Icon(string iconImg, string cmd, int xx, int yy, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size) : ox(xx), oy(yy), x(xx), y(yy), need_update(1), cx(xx), command(cmd), wid(winid){ int refl_h; if (iconImg == "") { icon = imlib_create_image(iw, ih); imlib_context_set_image(icon); imlib_image_set_has_alpha(1); } else if ( !(icon = LOAD_IMAGE(iconImg.c_str())) ) throw (iconImg + _(" Couldn't load icon image.")).c_str(); USE_IMAGE(icon); if (iconImg == "") { DATA32 *imagedata = imlib_image_get_data(); memmove(imagedata,icondata,iw*ih*4); imlib_image_put_back_data(imagedata); } imlib_context_set_blend(1); // add reflection to icon if (refl_size) { // calculate size for icons loaded from files if (!iw || !ih) { iw=imlib_image_get_width(); ih=imlib_image_get_height(); } refl_h = ih*(refl_size/100.0); icontmp = imlib_create_image(iw, ih); USE_IMAGE(icontmp); IMAGE_ENABLE_ALPHA(1); /* initially, an image created would contain garbage, * so initialize it with blank color modifier */ DATA8 blank_data[256]; memset(blank_data, 0, sizeof(blank_data)); Imlib_Color_Modifier blank_color_modifier = imlib_create_color_modifier(); imlib_context_set_color_modifier(blank_color_modifier); imlib_set_color_modifier_tables(NULL, NULL, NULL, blank_data); imlib_apply_color_modifier(); /*once initialized, reset the color modifier for future usage */ imlib_context_set_color_modifier(NULL); imlib_blend_image_onto_image(icon, 1, 0, 0, iw, ih, 0, 0, iw, ih-refl_h); imlib_blend_image_onto_image_skewed(icon, 1, 0, 0, iw, ih, 0, ih, iw , 0, 0, -refl_h); icon=imlib_clone_image(); } USE_IMAGE(icon); osize = size = IMAGE_WIDTH(); } Icon::~Icon(){ FREE_IMAGE(icon); } wbar-2.3.4/src/core/Bar.h0000644000175000017500000000446411724152440015111 0ustar00sotosoto00000000000000#ifndef _BAR_H_ #define _BAR_H_ #include #include #include "ImgWrap.h" #include "XWin.h" #include "Icon.h" class Bar { protected: /* Drawing buffs */ _image buffer; _image cleaning_buffer; _image barback; _image bar; /* reference to the container window */ XWin *window; std::vector icons; /* offset bar */ int bOffset; /* dist. between */ int icon_dist; /* icon size */ int icon_size; /* how many icons move */ int icon_anim; /* jump factor on hover */ float jump_factor; /* zoom factor on hover */ float zoom_factor; /* fast math constants */ float b_scl_d; float b_scl_a; float b_scl_b; float b_pos_m; float b_pos_n; float b_dd; float icon_offset; int icon_unit; /* animated icons on one side */ int icon_ansd; /* bar position in window */ int x, y; /* original bar dimensions */ int owidth, oheight; /* actual dimensions */ int width, height; int orientation; int position; bool grow; /* actual zoomed icon */ int zoomed_icon; /* is bar focused? */ int focused; /* set bar */ void focus(); virtual void unfocus(); #ifndef NO_EXPAND void expand(bool inverse); #endif void iconPress(int i_num, int offs); void transform(int mousex); virtual void render(); void acquireBack(); void drawBack(); virtual void cleanBack(); public: Bar(XWin *win, std::string barImg, int iSize, int iDist, float zFactor, float jFactor, int bOrient, int bPosition, int nAnim, int offset, bool grow); virtual ~Bar(); /* add an Icon */ void addIcon(std::string path, std::string comm, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size); /* Icon information */ int iconIndex(int mouse_x); std::string iconCommand(int i_num); unsigned long iconWinId(int i_num); int iconsShown(); /* Focus & unfocus events */ void refresh(int mouse_x = -1); void refreshUnfocused(int mouse_x = -1); /* Icon press events */ void iconDown(int i_num); void iconUp(int i_num); void setPosition(std::string p); void scale(bool updateBG = true); //void setZoom(float zoomf); //float getZoom(); }; #endif /* _BAR_H_ */ wbar-2.3.4/src/core/XWin.cc0000644000175000017500000003525411745663763015453 0ustar00sotosoto00000000000000#include #include #include #include #include #include "XWin.h" #include "i18n.h" using namespace std; unsigned char* repack64(unsigned char *repack_data, long repack_sz); XWin::XWin(int xx, int yy, int ww, int hh) : eventMask(NoEventMask), x(xx), y(yy), w(ww), h(hh) { /* if(threads) XInitThreads() */ int defScreen; XSetWindowAttributes attr; attr.bit_gravity = StaticGravity; attr.backing_store = Always; if (!(display = XOpenDisplay(NULL))) throw _("Couldn't open display"); defScreen = DefaultScreen(display); if (!(visual = DefaultVisual(display, defScreen))) throw _("Couldn't get visual"); if (!(colormap = DefaultColormap(display, defScreen))) throw _("Couln't get colormap"); if (!(depth = DefaultDepth(display, defScreen))) throw _("Couldn't get depth"); if (!(window = XCreateSimpleWindow(display, DefaultRootWindow(display), x, y, w, h, 0, 0, 0))) throw _("Couldn't create window"); /* prepare for delete window */ delWindow = XInternAtom(display, "WM_DELETE_WINDOW", false); /* Set WM Protocols to report window delete event */ XSetWMProtocols(display, window, &delWindow, 1); XClassHint ch = {(char *)PACKAGE_NAME, (char *)PACKAGE_NAME}; XSetClassHint(display, window, &ch); XChangeWindowAttributes(display, window, CWBitGravity|CWBackingStore, &attr); } XWin::~XWin() { XDestroyWindow(display, window); XCloseDisplay(display); } void XWin::selectInput(int ev_mask, int taskbar_set) { eventMask = ev_mask; XSelectInput(display, window, ev_mask); if (taskbar_set) { XSelectInput(display, XDefaultRootWindow(display), PropertyChangeMask); eventMask = ev_mask|PropertyChangeMask; } } void XWin::lowerWindow() { XLowerWindow(display, window); } void XWin::raiseWindow() { XRaiseWindow(display, window); } void XWin::mapWindow() { XMapWindow(display, window); } void XWin::unMapWindow() { XUnmapWindow(display, window); } bool XWin::nextEvent(XEvent *ev) { int qlen; do { /* queue length is relate to my only window */ if ((qlen = XQLength(display))) { if (XCheckTypedEvent(display, ClientMessage, ev) == True) { if ((Atom)ev->xclient.data.l[0] == delWindow) exit (0); else continue; } if (XCheckMaskEvent(display, eventMask, ev) == False) { /* process events we're not waiting for */ XSync(display, True); continue; } } else XMaskEvent(display, eventMask, ev); } while ((ev->type == MotionNotify || ev->type == PropertyNotify || ev->type == ClientMessage) && qlen > 0); return true; } void XWin::setName(char *name) { XTextProperty windowName; XStringListToTextProperty(&name, 1, &windowName); XSetWMName(display, window, &windowName); } void XWin::moveNresize(int x, int y, int w, int h) { XMoveResizeWindow(display, window, x, y, w, h); } int XWin::screenWidth() const { return WidthOfScreen(DefaultScreenOfDisplay(display)); } int XWin::screenHeight()const { return HeightOfScreen(DefaultScreenOfDisplay(display)); } Display *XWin::getDisplay() { return display; } Visual *XWin::getVisual() { return visual; } Colormap XWin::getColormap() { return colormap; } Drawable XWin::getDrawable() { return window; } /* Dont allow window manager to decorate / restack / remap / ... */ void XWin::setOverrideRedirection(Bool ovr) { XSetWindowAttributes attr; attr.override_redirect = ovr; attr.background_pixmap = None; //Copy from back; XChangeWindowAttributes(display, window, CWOverrideRedirect | CWBackPixmap , &attr); } void XWin::setDockWindow() { Atom a = XInternAtom(display, "_NET_WM_WINDOW_TYPE", True); if (a != None) { //Atom prop = XInternAtom(display, "_NET_WM_WINDOW_TYPE_DESKTOP", True); //Atom prop = XInternAtom(display, "_NET_WM_WINDOW_TYPE_NORMAL", True); Atom prop = XInternAtom(display, "_NET_WM_WINDOW_TYPE_DOCK", True); XChangeProperty(display, window, a, XA_ATOM, 32, PropModeReplace, (unsigned char *) &prop, 1); } } void XWin::noDecorations() { Atom a = XInternAtom(display, "_MOTIF_WM_HINTS", True); if (a != None) { long prop[5] = { 2, 0, 0, 0, 0 }; XChangeProperty(display, window, a, a, 32, PropModeReplace, (unsigned char *) prop, 5); } } void XWin::setSticky() { Atom a = XInternAtom(display, "_NET_WM_DESKTOP", True); if (a != None) { long prop = 0xFFFFFFFF; XChangeProperty(display, window, a, XA_CARDINAL, 32, PropModeAppend, (unsigned char *) &prop, 1); } a = XInternAtom(display, "_NET_WM_STATE", True); if (a != None) { Atom prop = XInternAtom(display, "_NET_WM_STATE_STICKY", True); XChangeProperty(display, window, a, XA_ATOM, 32, PropModeAppend, (unsigned char *) &prop, 1); } } void XWin::skipTaskNPager() { Atom a = XInternAtom(display, "_NET_WM_STATE", True); if (a != None) { Atom prop = XInternAtom(display, "_NET_WM_STATE_SKIP_TASKBAR", True); XChangeProperty(display, window, a, XA_ATOM, 32, PropModeAppend, (unsigned char *) &prop, 1); } a = XInternAtom(display, "_NET_WM_STATE", True); if (a != None) { Atom prop = XInternAtom(display, "_NET_WM_STATE_SKIP_PAGER", True); XChangeProperty(display, window, a, XA_ATOM, 32, PropModeAppend, (unsigned char *) &prop, 1); } } void XWin::bottomLayer() { Atom a = XInternAtom(display, "_WIN_LAYER", True); if (a != None) { long prop = 0; // 6 is above && _NET_WM_STATE_ABOVE in STATE XChangeProperty(display, window, a, XA_CARDINAL, 32, PropModeAppend, (unsigned char *) &prop, 1); } a = XInternAtom(display, "_NET_WM_STATE", True); if (a != None) { Atom prop = XInternAtom(display, "_NET_WM_STATE_BELOW", True); XChangeProperty(display, window, a, XA_ATOM, 32, PropModeAppend, (unsigned char *) &prop, 1); } } char * XWin::atomName(Atom atomname) { return XGetAtomName(display, atomname); } unsigned char * XWin::windowProp(Window *targetWin, const char *reqProp, unsigned long *len){ Atom a = XInternAtom(display, reqProp, True), actual_type; Window tWin; Atom proptype; const char *workAreaProp = "_NET_WORKAREA"; const char *viewportProp = "_NET_DESKTOP_VIEWPORT"; //the following switch would better be organized in some "protos.h" later if (targetWin == NULL) { tWin = XDefaultRootWindow(display); if ((reqProp == workAreaProp) || (reqProp == viewportProp)) proptype=XA_CARDINAL; else proptype=XA_WINDOW; } else { tWin = *targetWin; proptype=XA_STRING; } if (a != None) { int form; unsigned long remain; unsigned char * list; if (XGetWindowProperty(display, tWin, a, 0, 1024, False, proptype, &actual_type, &form, len, &remain, &list) != Success) { return 0; } return list; } return 0; } Atom XWin::issetHint(Window targetWin, const char *reqProp, const char *reqHint){ Atom a = XInternAtom(display, reqProp, True), actual_type; if (a != None) { int form; unsigned long remain; unsigned char * list; unsigned long len; // If not disabled, XErrorHandler will interrupt wbar if (XGetWindowProperty(display, targetWin, a, 0, 1024, False, XA_ATOM, &actual_type, &form, &len, &remain, &list) != Success) return 0; Atom *array = (Atom*) list; Atom hint=0; for (unsigned int k = 0; k < len; k++) { if ((Atom) array[k] == XInternAtom(display, reqHint, True)) hint=list[k]; } return hint; } return 0; } Atom *XWin::haveAtom(Window targetWin, const char *reqProp){ Atom a = XInternAtom(display, reqProp, True), actual_type; if (a != None) { int form; unsigned long remain; unsigned char * list; unsigned long len; // If not disabled, XErrorHandler will interrupt wbar if (XGetWindowProperty(display, targetWin, a, 0, 1024, False, XA_ATOM, &actual_type, &form, &len, &remain, &list) != Success) return NULL; if (actual_type == None && !form && !remain) return NULL; return (Atom*) list; } return 0; } // get icon parameters and data, based on xgeticon by Bertrand Mesot unsigned char *XWin::windowIcon(Window targetWin, int *iw, int *ih){ Atom a = XInternAtom(display, "_NET_WM_ICON", True), actual_type; if (a != None) { int form; unsigned long remain; unsigned char * list; unsigned char * cardinal32_imagedata; unsigned long len; // If not disabled, XErrorHandler will interrupt wbar. Otherwise, remember // to handle the returned NULL if (XGetWindowProperty(display, targetWin, a, 0, 1, False, XA_CARDINAL, &actual_type, &form, &len, &remain, &list) != Success) { return 0; } if (!list) return NULL; *iw = *(int*)list; if (XGetWindowProperty(display, targetWin, a, 1, 1, False, XA_CARDINAL, &actual_type, &form, &len, &remain, &list) != Success) { throw _("windowIcon() -- XGetWindowProperty"); return 0; } *ih = *(int*)list; // If not disabled, XErrorHandler will interrupt wbar. if (XGetWindowProperty(display, targetWin, a, 2, (*iw)*(*ih), False, XA_CARDINAL,&actual_type, &form, &len, &remain, &list) != Success) { return 0; } cardinal32_imagedata = repack64(list, (*iw)*(*ih)); XFree(list); return cardinal32_imagedata; } return 0; } void XWin::windowAction(unsigned long winid){ Window window_return; Atom a; XClientMessageEvent xev; int coordx, coordy; unsigned char *virtroot, *desknum; unsigned long ltemp; short toLeft=0; short toUpper=0; virtroot=XWin::windowProp(NULL,"_NET_VIRTUAL_ROOTS",<emp); if ((XWin::windowProp(NULL,"_NET_NUMBER_OF_DESKTOPS",<emp)) && (desknum=XWin::windowProp((Window*) (&winid), "_NET_WM_DESKTOP",<emp))) { a = XInternAtom(display, "_CURRENT_DESKTOP", True); xev.type = ClientMessage; xev.format = 32; xev.data.l[0] = (long) *desknum; xev.data.l[1] = CurrentTime; XSendEvent(display, XDefaultRootWindow(display), False, (SubstructureNotifyMask | SubstructureRedirectMask), (XEvent *)&xev); } if (virtroot) { XTranslateCoordinates (display, winid, (Window) *virtroot, 0, 0, & coordx, & coordy, & window_return); long *virtDesk=(long*) XWin::windowProp(NULL,"_NET_WORKAREA",<emp); long *useDesk=(long*) XWin::windowProp(NULL,"_NET_DESKTOP_VIEWPORT",<emp); if (coordx < 0) toLeft = -1; if (coordy < 0) toUpper = -1; useDesk[0]+=coordx/virtDesk[2]*virtDesk[2]+toLeft*virtDesk[2]; useDesk[1]+=coordy/virtDesk[3]*virtDesk[3]+toUpper*virtDesk[3]; a = XInternAtom(display, "_NET_DESKTOP_VIEWPORT", True); xev.type = ClientMessage; xev.format = 32; xev.data.l[0] = useDesk[0]; xev.data.l[1] = useDesk[1]; xev.window = XDefaultRootWindow(display); xev.message_type = a; XSendEvent(display, XDefaultRootWindow(display), False, (SubstructureNotifyMask | SubstructureRedirectMask), (XEvent *)&xev); } a = XInternAtom(display, "_NET_ACTIVE_WINDOW", True); xev.message_type = a; xev.window = (Window) winid; xev.data.l[0] = 0; xev.data.l[1] = CurrentTime; xev.data.l[2] = 0; XSendEvent(display, XDefaultRootWindow(display), False, (SubstructureNotifyMask | SubstructureRedirectMask), (XEvent *)&xev); //KWin needs explicit raise event XRaiseWindow (display,(Window) winid); } void XWin::windowIconify(unsigned long winid){ if (!XWin::issetHint((Window) winid,"_NET_WM_STATE","__NET_WM_STATE_HIDDEN")) XIconifyWindow(display, (Window) winid, DefaultScreen(display)); } int XWin::windowFocused(){ int revert; Window win_return; XGetInputFocus(display,&win_return,&revert); if (win_return == window) return 1; return 0; } void XWin::selectWindowInput(unsigned long winid) { // eventMask = ev_mask|PropertyChangeMask; XSelectInput(display, (Window) winid, PropertyChangeMask); } void XWin::flushAll() { XSync(display,True); } unsigned char *repack64 (unsigned char* repack_data, long repack_sz) { unsigned char *repack; long repack_alloc; long orig_idx, repack_idx; /* * Check if we are dealing with 64-bit arch. * * There, a 64 bit long is returned for CARDINAL32 in XGetWindowProperty * with its last four bytes padded with zeroes. We need to remove that * padding to pass consistent data to imlib2 */ if (sizeof(long) == 8) { repack_alloc = repack_sz*8; if (!(repack = (unsigned char *) malloc(repack_alloc))) return NULL; /* * seems somewhat bulky, but doing it in a cycle instead of byte-shift * doesn't suffer from endianness incompatibility and doesn't * cause potential slowdowns on SMP machines */ for (orig_idx=repack_idx=0; orig_idx #include #include "i18n.h" using namespace std; /* Super Constructor *//*{{{*/ SuperBar::SuperBar(XWin *win, string barImg, string barFont, int iSize, int iDist, float zFactor, float jFactor, int bOrient, int bPosition, int nAnim, int barAlfa, int unfocusAlfa, int filtSel, unsigned int filtCol, bool dfont, int offset, bool grow) : Bar(win, barImg, iSize, iDist, zFactor, jFactor, bOrient, bPosition, nAnim, offset, grow), font(NULL), drawfont(dfont), rest_w(0), filtSel(filtSel), filtRed((filtCol & 0x00ff0000)>>16), filtGreen((filtCol & 0x0000ff00)>>8), filtBlue(filtCol & 0x000000ff), filtAlfa((filtCol & 0xff000000)>>24), unfocusAlfa(unfocusAlfa), barAlfa(barAlfa) { int textW, textH; initFilters(); /* Text Printing */ if( !barFont.empty() ){ ADD_FONT_PATH(getenv("HOME")); if( !(font = LOAD_FONT(barFont.c_str())) ) { std::cout << _("Problem load font file.") << " " << barFont << std::endl; } else { USE_FONT(font); imlib_get_text_size("MMMMMMMMMMMMMMMMMMMMMMMMMMMMMM", &textW, &textH); font_restore = CREATE_IMAGE(textW, 2*textH); } } } SuperBar::~SuperBar(){ if( font ) FREE_IMAGE(font_restore); if(filtSel != 0){ imlib_context_set_filter(colorFilter); imlib_free_filter(); } if(unfocusAlfa != -1){ imlib_context_set_filter(fAlfaUnfocus); imlib_free_filter(); } if(font){ imlib_context_set_font(font); imlib_free_font(); } } /*}}}*/ /* Filter Images: *//*{{{*/ void SuperBar::initFilters(){ Imlib_Filter fAlfaBar; /* Color filters */ if(filtSel != 0){ colorFilter = imlib_create_filter(0); imlib_context_set_filter(colorFilter); #ifndef AVGFILTER /* Idem a lo que esta abajo imlib_filter_set_red (0, 0, 0, filtRed, 0, 0); imlib_filter_set_green(0, 0, 0, 0, filtGreen, 0); imlib_filter_set_blue (0, 0, 0, 0, 0, filtBlue); imlib_filter_set_alpha(0, 0, filtAlfa, 0, 0, 0); // new */ imlib_filter_set(0, 0, filtAlfa, filtRed, filtGreen, filtBlue); imlib_filter_divisors(255, 255, 255, 255); #else /* 100 en vez de 1 para no usar comma */ /* explicacion: (r+g+b)/3 = gray * * (r+g+b)/(3*R) = tonos de rojo ( R -> [0 - 1]) * (r+g+b)/(3*G) = tonos de verd ( G -> [0 - 1]) * (r+g+b)/(3*B) = tonos de blue ( B -> [0 - 1]) * */ if(filtRed != 0) imlib_filter_set_red (0, 0, 0, 1, 1, 1); else imlib_filter_set_red (0, 0, 0, 0, 0, 0); if(filtGreen != 0) imlib_filter_set_green(0, 0, 0, 1, 1, 1); else imlib_filter_set_green(0, 0, 0, 0, 0, 0); if(filtBlue != 0) imlib_filter_set_blue (0, 0, 0, 1, 1, 1); else imlib_filter_set_blue (0, 0, 0, 0, 0, 0); imlib_filter_set_alpha(0, 0, filtAlfa, 0, 0, 0); // new imlib_filter_divisors(255, filtRed!=0?3*255/filtRed:1, filtGreen!=0?3*255/filtGreen:1, filtBlue!=0?3*255/filtBlue:1); #endif } /* Set alfa to the Bar */ if(barAlfa != -1){ fAlfaBar = imlib_create_filter(0); imlib_context_set_filter(fAlfaBar); imlib_filter_set_alpha(0, 0, barAlfa, 0, 0, 0); imlib_filter_divisors(100, 0, 0, 0); USE_IMAGE(bar); imlib_image_filter(); imlib_free_filter(); } /* Alfa the bar when loose focus */ if(unfocusAlfa != -1){ fAlfaUnfocus = imlib_create_filter(0); imlib_context_set_filter(fAlfaUnfocus); imlib_filter_set_alpha(0, 0, unfocusAlfa, 0, 0, 0); imlib_filter_divisors(100, 0, 0, 0); } } /*}}}*/ /* Add Icon to the bar *//*{{{*/ void SuperBar::addIcon(string path, string comm, string txt, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size){ SuperIcon *ic; int textW, textH; if(font){ imlib_context_set_font(font); imlib_get_text_size(txt.c_str(), &textW, &textH); } icons.push_back( new SuperIcon(path, comm, txt, winid, icondata, iw, ih, refl_size, (int)icon_offset + icon_size/2 + icons.size() * icon_unit, // x coord y + (int)(0.125 * icon_size), textW, textH) ); // y coord ic = (SuperIcon*)icons.back(); /* Set colored icon */ if(filtSel != 0){ USE_IMAGE(ic->icon_color); imlib_context_set_filter(colorFilter); imlib_image_filter(); } } /*}}}*/ void SuperBar::removeIcon(){ icons.pop_back(); } /* Unfocus *//*{{{*/ inline void SuperBar::unfocus(){ _image tBar = NULL; focused = 0; /* avoid from restoring bad image */ rest_w = 0; x = (int)icon_offset; width = (int)(window->w - 2*icon_offset); zoomed_icon = -1; /* Alfa filter the Bar */ if(unfocusAlfa != -1){ USE_IMAGE(bar); tBar = CLONE_IMAGE(); imlib_context_set_filter(fAlfaUnfocus); imlib_image_filter(); } drawBack(); #ifndef NO_EXPAND expand(true); #endif /* Restore bar */ if(unfocusAlfa != -1){ FREE_IMAGE(bar); bar = tBar; } } /*}}}*/ /* Clean the Bar *//*{{{*/ void SuperBar::cleanBack(){ if(font && drawfont) if(rest_w > 0 ){ USE_IMAGE(buffer); BLEND_IMAGE(font_restore, 0, 0, rest_w, rest_h, rest_x, rest_y, rest_w, rest_h); rest_w = 0; } Bar::cleanBack(); } /*}}}*/ /* Render the Bar *//*{{{*/ void SuperBar::render(){ SuperIcon *cur_ic; _image cur_im = NULL, tIcon; int tw = 0, th = 0; /* save text coords and render zoomed ic last *//*{{{*/ if(zoomed_icon != -1){ /* Blend the zoomed icon last */ cur_ic = (SuperIcon*)icons.back(); icons.back() = icons[zoomed_icon]; icons[zoomed_icon] = cur_ic; if(font && drawfont){ cur_ic = (SuperIcon*)icons.back(); /* text drawing cords */ if(orientation == 0){ tw = cur_ic->x - (cur_ic->textW - cur_ic->size)/2; th = cur_ic->y + cur_ic->size - cur_ic->textH; }else{ tw = cur_ic->y - (cur_ic->textW - cur_ic->size)/2; th = cur_ic->x + cur_ic->size - cur_ic->textH; } rest_x = tw; rest_y = th; rest_w = cur_ic->textW + 1; rest_h = cur_ic->textH + 1; } } /*}}}*/ /* Set work area */ USE_IMAGE(buffer); SET_BLEND(1); /* Blend Icons */ for(size_t a=0; a blend it */ if(cur_ic->need_update == 1){ if(a < icons.size()-1 || !focused) cur_ic->need_update = 0; /* Select image to blend *//*{{{*/ if(a == icons.size()-1 && zoomed_icon != -1){ switch(filtSel){ case 0: case 2: cur_im = cur_ic->icon; break; case 1: case 3: cur_im = cur_ic->icon_color; break; } }else{ switch(filtSel){ case 0: case 1: cur_im = cur_ic->icon; break; case 2: case 3: cur_im = cur_ic->icon_color; break; } } /*}}}*/ if(!focused && unfocusAlfa != -1){ USE_IMAGE(cur_im); tIcon = CLONE_IMAGE(); USE_IMAGE(tIcon); imlib_context_set_filter(fAlfaUnfocus); imlib_image_filter(); cur_im = tIcon; USE_IMAGE(buffer); } if(orientation == 0) BLEND_IMAGE(cur_im, 0, 0, cur_ic->osize, cur_ic->osize, cur_ic->x, cur_ic->y, cur_ic->size, cur_ic->size); else BLEND_IMAGE(cur_im, 0, 0, cur_ic->osize, cur_ic->osize, cur_ic->y, cur_ic->x, cur_ic->size, cur_ic->size); if(font && drawfont){ if(a == icons.size()-1 && zoomed_icon != -1){ /* keep image under text */ SET_BLEND(0); USE_IMAGE(font_restore); BLEND_IMAGE(buffer, rest_x, rest_y, rest_w, rest_h, 0, 0, rest_w, rest_h); SET_BLEND(1); USE_IMAGE(buffer); /* draw text */ imlib_context_set_color(0, 0, 0, 255); imlib_text_draw(tw+1, th+1, cur_ic->text.c_str()); imlib_context_set_color(255, 255, 255, 255); imlib_text_draw(tw, th, cur_ic->text.c_str()); } } if(!focused && unfocusAlfa != -1){ FREE_IMAGE(cur_im); USE_IMAGE(buffer); } } } if(zoomed_icon != -1){ cur_ic = (SuperIcon*)icons.back(); icons.back() = icons[zoomed_icon]; icons[zoomed_icon] = cur_ic; } /* Show the buffer */ SET_BLEND(0); RENDER_TO_DRAWABLE(0, 0); } /*}}}*/ wbar-2.3.4/src/core/Main.cc0000644000175000017500000004603212025755741015434 0ustar00sotosoto00000000000000#include #include #include #include #include #include #include #include #include "XWin.h" #include "ImgWrap.h" #include "OptParser.h" #include "SuperBar.h" #include "Config.h" #include "Utils.h" #include "i18n.h" static size_t configitems; static unsigned int taskbar; static std::list list; static std::list::iterator it; static App *p; static Bar *barra; static XWin barwin(50,50,50,50); unsigned long bg_window; void corpshandler(int); int mapIcons(); static int refl_size; static XErrorHandler oldXHandler = (XErrorHandler) 0 ; static int eErrorHandler(Display *, XErrorEvent *); int main(int argc, char **argv) { #ifdef ENABLE_NLS setlocale( LC_ALL, "" ); bindtextdomain(GETTEXT_PACKAGE, GNOMELOCALEDIR); bind_textdomain_codeset(GETTEXT_PACKAGE, "UTF-8"); textdomain(GETTEXT_PACKAGE); #endif /* Variables */ struct sigaction sigh; barra = NULL; try { unsigned int dblclk_tm, butpress, noreload; unsigned long dblclk0 = 0; int inum, vertbar; /* Register handler for recovering corps */ sigh.sa_handler = corpshandler; sigh.sa_flags = 0; sigemptyset(&sigh.sa_mask); //exclude all signals sigaction(SIGCHLD, &sigh, NULL); Config config; OptParser tmpoptparser(argc, argv); if ( tmpoptparser.isSet( OptParser::CONFIG ) ) { config.setFile( tmpoptparser.getArg( OptParser::CONFIG ) ); } list = config.getAppList(); if (list.size() != 0) { it = list.begin(); p = (*it); } else { throw _("Configuration empty."); } std::string command = p->getCommand(); if (command.empty()) { command = PACKAGE_NAME" "DEFAULT_ARGV; } if (argc <= 1 || tmpoptparser.isSet( OptParser::CONFIG )) { std::list list; Utils util; list = util.split ( command, " " ); argc = list.size(); if (argc > 1) { std::list::iterator ac; argv = new char * [argc + 1]; int i = 0; for (ac = list.begin();ac != list.end();ac++, i++) { argv[i] = strdup((*ac).c_str()); } argv[argc] = NULL; } } XEvent ev; OptParser optparser(argc, argv); if (optparser.isSet(OptParser::VERS)) { std::cout << _("Version of ") << PACKAGE_NAME << " " << VERSION << std::endl; return 0; } if (optparser.isSet(OptParser::HELP)) { std::cout << _("Usage: wbar [option] ... [option]") << std::endl; std::cout << _("Options:") << std::endl; std::cout << " --help " << _("this help") << std::endl; std::cout << " --version " << _("show version") << std::endl; std::cout << " --config filepath " << _("conf-file (eg: $HOME/.wbar)") << std::endl; std::cout << " --above-desk " << _("run above a desktop app (ie: xfdesktop)") << std::endl; std::cout << " --taskbar " << _("enable taskbar") << std::endl; std::cout << " --noreload " << _("right click does not force reload anymore") << std::endl; std::cout << " --offset i " << _("offset bar (eg: 20)") << std::endl; std::cout << " --isize i " << _("icon size (eg: 32)") << std::endl; std::cout << " --idist d " << _("icon dist (eg: 1)") << std::endl; std::cout << " --zoomf z " << _("zoom factor (eg: 1.8 or 2.5)") << std::endl; std::cout << " --jumpf j " << _("jump factor (eg: 1.0 or 0.0)") << std::endl; std::cout << " --pos p " << _("position:") << std::endl; std::cout << " " << "top | bottom | left | right | " << std::endl; std::cout << " " << "center | -" << std::endl; std::cout << " --grow " << _("inverting icons growth") << std::endl; std::cout << " --dblclk ms " << _("time in ms for double click (0: single click)") << std::endl; std::cout << " --bpress " << _("icon gets pressed") << std::endl; std::cout << " --vbar " << _("vertical bar") << std::endl; std::cout << " --balfa i " << _("bar alfa (0-100)") << std::endl; std::cout << " --rsize i " << _("reflection size in percents (0-100)") << std::endl; std::cout << " --falfa i " << _("unfocused bar alfa (0-100)") << std::endl; std::cout << " --filter i " << _("color filter (0: none 1: hovered 2: others, 3: all)") << std::endl; std::cout << " --fc 0xAARRGGBB " << _("filter color (default green 0xff00c800)") << std::endl; std::cout << " --nanim i " << _("number of animated icons: 1, 3, 5, 7, 9, ...") << std::endl; std::cout << " --nofont " << _("if set disables font rendering") << std::endl; std::cout << _("View man(1).") << std::endl; return 0; } /* window configuration */ if (optparser.isSet(OptParser::ABOVE_DESK)) { barwin.setDockWindow(); barwin.skipTaskNPager(); barwin.noDecorations(); barwin.setSticky(); barwin.bottomLayer(); } else { barwin.setOverrideRedirection(); barwin.lowerWindow(); } barwin.setName(basename(argv[0])); taskbar = optparser.isSet(OptParser::TASKBAR)?1:0; /* tell X what events we're intrested in */ barwin.selectInput(PointerMotionMask | ExposureMask | ButtonPressMask |ButtonReleaseMask | LeaveWindowMask | EnterWindowMask,taskbar); /* Image library set up */ INIT_IMLIB(barwin.getDisplay(), barwin.getVisual(), barwin.getColormap(), barwin.getDrawable(), 2048*2048); /* check if double clicking, ms time */ dblclk_tm = optparser.isSet(OptParser::DBLCLK)?atoi(optparser.getArg(OptParser::DBLCLK).c_str()):0; butpress = optparser.isSet(OptParser::BPRESS)?1:0; /* check if reload is admited */ noreload = optparser.isSet(OptParser::NORELOAD)?1:0; vertbar = optparser.isSet(OptParser::VBAR)?1:0; refl_size = optparser.isSet(OptParser::RSIZE)?atoi(optparser.getArg(OptParser::RSIZE).c_str()):0; bool grow = optparser.isSet(OptParser::GROW)?true:false; if (optparser.isSet(OptParser::BALFA) || optparser.isSet(OptParser::FALFA) || optparser.isSet(OptParser::FILTER) || !(p->getTitle().empty()) || optparser.isSet(OptParser::NOFONT)) { barra = new SuperBar(&barwin, p->getIconName(), p->getTitle(), optparser.isSet(OptParser::ISIZE)?atoi(optparser.getArg(OptParser::ISIZE).c_str()):32, optparser.isSet(OptParser::IDIST)?atoi(optparser.getArg(OptParser::IDIST).c_str()):1, optparser.isSet(OptParser::ZOOMF)?atof(optparser.getArg(OptParser::ZOOMF).c_str()):1.8, optparser.isSet(OptParser::JUMPF)?atof(optparser.getArg(OptParser::JUMPF).c_str()):1, vertbar, 4, optparser.isSet(OptParser::NANIM)?atoi(optparser.getArg(OptParser::NANIM).c_str()):5, optparser.isSet(OptParser::BALFA)?atoi(optparser.getArg(OptParser::BALFA).c_str()):-1, optparser.isSet(OptParser::FALFA)?atoi(optparser.getArg(OptParser::FALFA).c_str()):-1, optparser.isSet(OptParser::FILTER)?atoi(optparser.getArg(OptParser::FILTER).c_str()):0, strtoul((optparser.isSet(OptParser::FC)?optparser.getArg(OptParser::OptParser::FC).c_str():"0xff00c800"), NULL, 16), optparser.isSet(OptParser::NOFONT)?0:1, optparser.isSet(OptParser::OFFSET)?atoi(optparser.getArg(OptParser::OFFSET).c_str()):0, grow); } else { barra = new Bar(&barwin, p->getIconName(), optparser.isSet(OptParser::ISIZE)?atoi(optparser.getArg(OptParser::ISIZE).c_str()):32, optparser.isSet(OptParser::IDIST)?atoi(optparser.getArg(OptParser::IDIST).c_str()):1, optparser.isSet(OptParser::ZOOMF)?atof(optparser.getArg(OptParser::ZOOMF).c_str()):1.8, optparser.isSet(OptParser::JUMPF)?atof(optparser.getArg(OptParser::JUMPF).c_str()):1, vertbar, 4, optparser.isSet(OptParser::NANIM)?atoi(optparser.getArg(OptParser::NANIM).c_str()):5, optparser.isSet(OptParser::OFFSET)?atoi(optparser.getArg(OptParser::OFFSET).c_str()):0, grow); } if (p) delete p; // note the size of icons in config befor we add any active icons configitems = (size_t) list.size(); //loop until actual window data is obtained while (mapIcons()); /* Show the Bar */ if (optparser.isSet(OptParser::ABOVE_DESK)) { barwin.mapWindow(); barra->setPosition(optparser.getArg(OptParser::POS)); } else { barra->setPosition(optparser.getArg(OptParser::POS)); barwin.mapWindow(); } barwin.lowerWindow(); barra->refresh(); /* Event Loop */ while (true) { barwin.nextEvent(&ev); switch (ev.type) { case Expose: barra->refresh(); break; /* Button Press */ case ButtonPress: //KDE won't honor stacking order and dock property. Lower explicitly barwin.lowerWindow(); switch (ev.xbutton.button) { case 1: if (butpress!=0) { if (!vertbar) { if ((inum = barra->iconIndex(ev.xbutton.x))!=-1) barra->iconDown(inum); } else { if ((inum = barra->iconIndex(ev.xbutton.y))!=-1) barra->iconDown(inum); } } break; case 4: //wheel up //barra->setZoom(barra->getZoom()+0.1); //barra->scaleIcons(ev.xbutton.x); break; case 5: //barra->setZoom(barra->getZoom()-0.1); //barra->scaleIcons(ev.xbutton.x); break; } break; /* Button Release */ case ButtonRelease: // some programs like skype miss their exit notification so the icon // still remains in the taskbar. Just reload the bar if such icon clicked oldXHandler = XSetErrorHandler(eErrorHandler); switch (ev.xbutton.button) { case 3:/* Redraw Bar*/ if(!noreload) { if ( tmpoptparser.isSet( OptParser::CONFIG ) ) { execvp(tmpoptparser.getArgv()[0], tmpoptparser.getArgv()); } else { execvp(argv[0], argv); } } break; case 1:/* Execute Program */ if (!vertbar) inum = barra->iconIndex(ev.xbutton.x); else inum = barra->iconIndex(ev.xbutton.y); if (butpress!=0) barra->iconUp(inum); /* Double click time 200 ms */ if (barra->iconWinId(inum)) { // raise event may go to a window already gone oldXHandler = XSetErrorHandler(eErrorHandler); barwin.windowAction(barra->iconWinId(inum)); (void) XSetErrorHandler(oldXHandler); } else { if ((ev.xbutton.time - dblclk0 iconCommand(inum).c_str(), NULL) != 0) { std::cout << _("Error run program: ") << barra->iconCommand(inum) << std::endl; } } } else dblclk0 = ev.xbutton.time; } break; case 2:/* Iconify window */ if (!vertbar) inum = barra->iconIndex(ev.xbutton.x); else inum = barra->iconIndex(ev.xbutton.y); if (barra->iconWinId(inum)) barwin.windowIconify(barra->iconWinId(inum)); break; } (void) XSetErrorHandler(oldXHandler); break; /* Motion Notify */ case MotionNotify: if (!vertbar) barra->refresh(ev.xmotion.x); else barra->refresh(ev.xmotion.y); break; /* Leave & Enter Notify */ case LeaveNotify: /* NotifyGrab && Ungrab r notified on B1 click*/ if (ev.xcrossing.mode!=NotifyGrab && !(ev.xcrossing.state&Button1Mask)) barra->refresh(); //hack for kde multiple notifications in grab mode barwin.flushAll(); break; case EnterNotify: if (ev.xcrossing.mode!=NotifyUngrab && !(ev.xcrossing.state&Button1Mask)) { if (!vertbar) barra->refresh(ev.xcrossing.x); else barra->refresh(ev.xcrossing.y); } break; case PropertyNotify: if ((std::string) barwin.atomName(ev.xproperty.atom) == "_NET_WM_ICON") { mapIcons(); if (!barwin.windowFocused()) barra->refreshUnfocused(); else if (!vertbar) barra->refresh(ev.xcrossing.x); else barra->refresh(ev.xcrossing.y); } if ((std::string) barwin.atomName(ev.xproperty.atom) == "_NET_CLIENT_LIST") { //loop until actual window data is obtained while (mapIcons()); if (!barwin.windowFocused()) barra->refreshUnfocused(); else if (!vertbar) barra->refresh(ev.xcrossing.x); else barra->refresh(ev.xcrossing.y); } break; default: break; } } } catch (const char *m) { std::cout << m << std::endl; } if (barra) delete barra; return 0; } void corpshandler(int sig) { while (waitpid(-1, NULL, WNOHANG) > 0) { } } int mapIcons() { unsigned char *runningApp; unsigned long len, tmp_len, winid; std::string pixmapdir = PIXMAPDIR; std::string packagename = PACKAGE_NAME; std::string icon,cmnd; unsigned char *titl; int firstrun=0; // on the first run, there will be no icons displayed if (!barra->iconsShown()) firstrun=1; //roll back the list to contain only the icons from config while ((size_t)list.size() > configitems) { list.pop_back(); ((SuperBar *)barra)->removeIcon(); it--; } // add currently running tasks to the list if ( (taskbar) && (runningApp = barwin.windowProp(NULL, "_NET_CLIENT_LIST", &len)) ) { long *array = (long*) runningApp; // in e16 WM, context menus block XQueue to stay on top and focused // until closed, and so wbar gets and old _NET_CLIENT_LIST with // nonexistent windows there, crashing wbar on quering them. // Since no windows to display can appear or disappear during that, // we work around the problem by just ignoring BadWindow errors oldXHandler = XSetErrorHandler(eErrorHandler); for (unsigned long k = 0; k < len; k++){ Window w = (Window) array[k]; if (barwin.issetHint(w, "_NET_WM_WINDOW_TYPE", "_NET_WM_WINDOW_TYPE_DESKTOP")&&firstrun) bg_window = w; if (!barwin.issetHint(w,"_NET_WM_STATE","_NET_WM_STATE_SKIP_TASKBAR") && (barwin.issetHint(w,"_NET_WM_WINDOW_TYPE", "_NET_WM_WINDOW_TYPE_NORMAL") || !barwin.haveAtom(w,"_NET_WM_WINDOW_TYPE"))) { icon=""; int iiw,iih; if (barwin.windowIcon(w, &iiw, &iih) == NULL) icon=pixmapdir+"/"+packagename+"/"+"questionmark.png"; cmnd=""; winid=(unsigned long) w; titl=barwin.windowProp(&w,"WM_NAME",&tmp_len); // now, THIS is impossible, so we're dealing with an // old NET_CLIENT_LIST if (!titl) continue; const char *title=(const char*) titl; App *app = new App(icon, cmnd, title, winid); list.push_back(app); icon = cmnd = ""; titl = NULL; winid=0; } } } //if this is not an initial run if (!firstrun) // and we added no windows if ((size_t)list.size() == configitems) //then there is no need to add icons return 0; for (it++; it != list.end(); it++) { p = (*it); try { if (p->getIconName() != "") ((SuperBar *)barra)->addIcon(p->getIconName(), p->getCommand(), p->getTitle(), p->getWinid(), NULL, 0, 0, refl_size); else { int iw, ih; barwin.selectWindowInput(p->getWinid()); unsigned char *icondata = barwin.windowIcon((Window) p->getWinid(), &iw, &ih); if (icondata) { ((SuperBar *)barra)->addIcon(p->getIconName(), p->getCommand(), p->getTitle(), p->getWinid(), icondata, iw, ih, refl_size); } else { std::cout << "window has gone, not adding" << std::endl; return -1; } } } catch (const char *m) { std::cout << m << std::endl; } if (p) delete p; } (void) XSetErrorHandler(oldXHandler); barra->scale(); if (firstrun) it--; return 0; } static int eErrorHandler(Display *display, XErrorEvent *theEvent) { std::cout << "error code:" << (int) theEvent->error_code << " request code:" << (int) theEvent->request_code << std::endl; return 0; exit (-1); /* No exit! - but keep lint happy */ } wbar-2.3.4/src/core/SuperBar.h0000644000175000017500000000200011724152440016110 0ustar00sotosoto00000000000000#ifndef _SUPERBAR_H_ #define _SUPERBAR_H_ #include "ImgWrap.h" #include "Bar.h" class SuperBar : public Bar{ protected: Imlib_Filter colorFilter; Imlib_Filter fAlfaUnfocus; _font font; int drawfont; _image font_restore; int rest_x, rest_y, rest_w, rest_h; /* Icon selection */ /* 0: none 1: hovered, 2: others, 3: all */ int filtSel; int filtRed; int filtGreen; int filtBlue; int filtAlfa; /* Alfa */ int unfocusAlfa; int barAlfa; void unfocus(); void initFilters(); void render(); void cleanBack(); public: SuperBar(XWin *win, std::string barImg, std::string barFont, int iSize, int iDist, float zFactor, float jFactor, int bOrient, int bPosition, int nAnim, int barAlfa, int unfocusAlfa, int filtSel, unsigned int filtCol, bool dfont, int offset, bool grow); ~SuperBar(); void addIcon(std::string path, std::string comm, std::string text, unsigned long winid, unsigned char *icondata, int iw, int ih, int refl_size); void removeIcon(); }; #endif /* _SUPERBAR_H_ */ wbar-2.3.4/src/config/0000755000175000017500000000000012027635465014553 5ustar00sotosoto00000000000000wbar-2.3.4/src/config/Functions.h0000644000175000017500000000242411667227666016707 0ustar00sotosoto00000000000000#ifndef _CALLBACKS_H_ #define _CALLBACKS_H_ #include #include #ifdef __cplusplus extern "C" { #endif void view_settings(); void set_treeview(); void set_default_icon(); void set_comboboxs(); void set_config(); void set_config_states(std::string command); void set_signals(); void update_treeview(); GdkPixbuf * get_icon(std::string icon); GdkPixbuf * get_icon_size(std::string icon, int width, int heigth); void set_status_button(); void on_settings_new(); void on_settings_edit(); void on_settings_delete(); void on_settings_update(); void on_settings_close(); std::string getCommand(); bool validate(); void on_app_accept(); void on_app_cancel(); void on_app_up(); void on_app_down(); void on_treeview_cursor_changed (); void on_icon_changed(); void on_select_command(); void on_select_icon(); void on_select_fontname(); void on_select_imagename(); gboolean clickTreeView(GtkWidget * widget, GdkEventButton * event, gpointer data); void checkbutton_toggled (GtkToggleButton *togglebutton, gpointer data); gboolean widget_hide(GtkWidget * widget, GdkEvent * event, gpointer data); void show_about(); #ifdef __cplusplus } #endif #endif wbar-2.3.4/src/config/Run.cc0000644000175000017500000000505411724152440015620 0ustar00sotosoto00000000000000#include "Run.h" #include "Utils.h" #include #include #include #include #include #include #include #include #include #include #include #include "i18n.h" #ifndef PIDOF_BIN #define PIDOF_BIN "pidof " #endif Run::Run() { } Run::~Run() { } int Run::getPID() { int pid = -1; FILE * process; process = popen(PIDOF_BIN PACKAGE_NAME, "r"); if (process) { char spid[50]; if (fgets(spid, sizeof(spid), process) != NULL) { pid = atoi(spid); } pclose(process); } return pid; } char ** Run::getArg(int &argc) { std::list list; argc = 0; int pid = Run::getPID(); char **argv = NULL; if (pid > 0) { char data[512]; std::string line; sprintf (data, "/proc/%d/cmdline", pid); std::ifstream file (data); if (file.is_open()) { char c[2]; while(!file.eof()) { file.read (c,1); c[1] = 0; line += (c[0] != 0 ? c:" "); } file.close(); Utils util; list = util.split(line, " "); argc = list.size(); if (argc > 1) { std::list::iterator ac; argv = new char * [argc + 1]; int i = 0; for (ac = list.begin();ac != list.end();ac++, i++) { argv[i] = strdup((*ac).c_str()); } argv[argc] = NULL; } } } return argv; } bool Run::restart(std::string command) { Run::stop(); Utils util; return Run::start(util.split( command, " " )); } bool Run::start(std::list list) { if (list.size() == 0) return false; std::string args; std::list::iterator it; for (it = list.begin(), it++;it != list.end();it++) { args += " "; args += (*it); } return start(args); } bool Run::start(std::string command) { if (system ((PACKAGE_NAME" " + command + " &").c_str()) != 0) { std::cout << _("Error run program: ") << PACKAGE_NAME" " + command << std::endl; } return Run::getPID() > 0; } void Run::stop() { if (Run::getPID() > 0) { if (system ("killall "PACKAGE_NAME) != 0) { std::cout << _("Error kill program: ") << PACKAGE_NAME << std::endl; } } } wbar-2.3.4/src/config/Functions.cc0000644000175000017500000014017312026231775017033 0ustar00sotosoto00000000000000#include "Functions.h" #include #include #include #include #include #include #include "i18n.h" #include "Utils.h" #include "Config.h" #include "Run.h" #include "OptParser.h" #define ICON_DEFAULT PIXMAPDIR"/"PACKAGE_NAME".png" static const gchar *authors[] = { "Yadickson Soto ", "Rodolfo Granata ", "Ivan Fitenko ", NULL }; static const gchar *documenters[] = { "Yadickson Soto ", NULL }; static const gchar * translater = "Español - Yadickson Soto \nDeutsch - Daniel MeissWilhelm "; static GladeXML * xml = NULL; static bool edit = false; std::string configFile; enum GrowIcons { GROW_NORMAL, GROW_INVERTED }; enum Positions { POS_TOP, POS_BOTTOM, POS_LEFT, POS_RIGHT, POS_CENTER, POS_BOTTOM_LEFT, POS_BOTTOM_RIGHT, POS_TOP_LEFT, POS_TOP_RIGHT }; enum Filters { FILTER_NONE, FILTER_HOVERED, FILTER_OTHERS, FILTER_ALL }; enum { TREE_COLUMN_ICON, TREE_COLUMN_TITLE, TREE_COLUMN_COMMAND, TREE_COLUMN_ICON_NAME, TREE_COLUMNS }; enum { COMBO_COLUMN_TEXT, COMBO_COLUMN_ID, COMBO_COLUMNS }; enum { ICON_COLUMN_PIXBUF, ICON_COLUMN_TEXT, ICON_COLUMN_ID, ICON_COLUMNS }; void view_settings() { glade_init(); xml = glade_xml_new (GLADE_PACKAGE_NAME, NULL, NULL); set_default_icon(); GtkWidget * settings = glade_xml_get_widget (xml, "dialog_settings"); gtk_widget_show (GTK_WIDGET (settings)); gtk_widget_show_all (settings); set_signals(); set_treeview(); set_comboboxs(); set_config(); update_treeview(); } void set_default_icon() { GdkPixbuf * pixbuf; pixbuf = gdk_pixbuf_new_from_file (ICON_DEFAULT, NULL); gtk_window_set_default_icon(pixbuf); g_object_unref (pixbuf); } void set_treeview() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkListStore *list_store = gtk_list_store_new (TREE_COLUMNS, GDK_TYPE_PIXBUF, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING); gtk_tree_view_set_model (GTK_TREE_VIEW (treeview), GTK_TREE_MODEL (list_store)); GtkTreeViewColumn *column; GtkCellRenderer *renderer; renderer = gtk_cell_renderer_pixbuf_new (); column = gtk_tree_view_column_new_with_attributes (_("Icon"), renderer, "pixbuf", TREE_COLUMN_ICON, NULL); gtk_tree_view_append_column (GTK_TREE_VIEW (treeview), column); renderer = gtk_cell_renderer_text_new (); column = gtk_tree_view_column_new_with_attributes (_("Title"), renderer, "markup", TREE_COLUMN_TITLE, NULL); gtk_tree_view_append_column (GTK_TREE_VIEW (treeview), column); renderer = gtk_cell_renderer_text_new (); column = gtk_tree_view_column_new_with_attributes (_("Command"), renderer, "markup", TREE_COLUMN_COMMAND, NULL); gtk_tree_view_append_column (GTK_TREE_VIEW (treeview), column); } void set_comboboxs() { GtkWidget * combo; GtkListStore *list_store; GtkTreeIter iter; GtkCellRenderer *cell; combo = glade_xml_get_widget (xml, "combobox_pos"); list_store = gtk_list_store_new (COMBO_COLUMNS, G_TYPE_STRING, G_TYPE_INT); gtk_combo_box_set_model (GTK_COMBO_BOX(combo), GTK_TREE_MODEL (list_store)); cell = gtk_cell_renderer_text_new(); gtk_cell_layout_pack_start(GTK_CELL_LAYOUT(combo), cell, TRUE); gtk_cell_layout_set_attributes(GTK_CELL_LAYOUT(combo), cell, "text", 0, NULL); gtk_list_store_append(list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("top"), COMBO_COLUMN_ID, POS_TOP, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("bottom"), COMBO_COLUMN_ID, POS_BOTTOM, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("left"), COMBO_COLUMN_ID, POS_LEFT, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("right"), COMBO_COLUMN_ID, POS_RIGHT, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("center"), COMBO_COLUMN_ID, POS_CENTER, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("bot-left"), COMBO_COLUMN_ID, POS_BOTTOM_LEFT, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("bot-right"), COMBO_COLUMN_ID, POS_BOTTOM_RIGHT, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("top-left"), COMBO_COLUMN_ID, POS_TOP_LEFT, -1); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("top-right"), COMBO_COLUMN_ID, POS_TOP_RIGHT, -1); gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_RIGHT); combo = glade_xml_get_widget (xml, "combobox_filter"); list_store = gtk_list_store_new (COMBO_COLUMNS, G_TYPE_STRING, G_TYPE_INT); gtk_combo_box_set_model (GTK_COMBO_BOX(combo), GTK_TREE_MODEL (list_store)); cell = gtk_cell_renderer_text_new(); gtk_cell_layout_pack_start(GTK_CELL_LAYOUT(combo), cell, TRUE); gtk_cell_layout_set_attributes(GTK_CELL_LAYOUT(combo), cell, "text", 0, NULL); gtk_list_store_append(list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("none"), COMBO_COLUMN_ID, FILTER_NONE, -1); gtk_list_store_append(list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("hovered"), COMBO_COLUMN_ID, FILTER_HOVERED, -1); gtk_list_store_append(list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("others"), COMBO_COLUMN_ID, FILTER_OTHERS, -1); gtk_list_store_append(list_store, &iter); gtk_list_store_set (list_store, &iter, COMBO_COLUMN_TEXT, _("all"), COMBO_COLUMN_ID, FILTER_ALL, -1); gtk_combo_box_set_active (GTK_COMBO_BOX (combo), FILTER_NONE); } void set_config() { Config config; std::list list = config.getAppList(); if (list.size() == 0) return; std::list ::iterator it; it = list.begin(); App * app = (*it); if (app) { Utils util; std::string font = app->getTitle(); int size = 10; std::list f = util.split(font, "/"); try { size = (f.size() > 1 ? (int)strtold(f.back().c_str(), NULL) : 10); f.pop_back(); } catch(...) { } font = util.join(f, "/"); GtkWidget * spinbutton_font_size = glade_xml_get_widget (xml, "spinbutton_font_size"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton_font_size), size); GtkWidget * entry_font_name = glade_xml_get_widget (xml, "entry_font_name"); gtk_entry_set_text (GTK_ENTRY (entry_font_name), font.c_str()); GtkWidget * entry_image_name = glade_xml_get_widget (xml, "entry_image_name"); gtk_entry_set_text (GTK_ENTRY (entry_image_name), app->getIconName().c_str()); set_config_states(app->getCommand()); delete app; } } void set_config_states(std::string command) { GtkWidget * checkbutton = NULL; GtkWidget * spinbutton = NULL; Run run; int argc; char **argv = run.getArg(argc); if (argc <= 1) { std::list list; Utils util; list = util.split ( command, " " ); argc = list.size(); if (argc > 1) { std::list::iterator ac; argv = new char * [argc + 1]; int i = 0; for (ac = list.begin();ac != list.end();ac++, i++) { argv[i] = strdup((*ac).c_str()); } argv[argc] = NULL; } } OptParser tmpoptparser(argc, argv); if ( tmpoptparser.isSet( OptParser::CONFIG ) ) { configFile = tmpoptparser.getArg( OptParser::CONFIG ); Config config; config.setFile (configFile); config.getAppList (); std::list list = config.getAppList(); std::list::iterator it; App *p; if (list.size() != 0) { it = list.begin(); p = (*it); } else { throw _("Configuration empty."); } command = p->getCommand(); delete p; if (command.empty()) { command = PACKAGE_NAME" "DEFAULT_ARGV; } if (argc <= 1 || tmpoptparser.isSet( OptParser::CONFIG )) { std::list list; Utils util; list = util.split ( command, " " ); argc = list.size(); if (argc > 1) { if (argc > 0) delete[] argv; std::list::iterator ac; argv = new char * [argc + 1]; int i = 0; for (ac = list.begin();ac != list.end();ac++, i++) { argv[i] = strdup((*ac).c_str()); } argv[argc] = NULL; } } } OptParser opt(argc, argv); if(opt.isSet(OptParser::BPRESS)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_bpress"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::ABOVE_DESK)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_above_desk"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::VBAR)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_vbar"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::NOFONT)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_nofont"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::POS)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_pos"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); GtkWidget * combo = glade_xml_get_widget (xml, "combobox_pos"); std::string pos = opt.getArg(OptParser::POS); if (pos == "top") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_TOP); else if (pos == "bottom") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_BOTTOM); else if (pos == "left") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_LEFT); else if (pos == "center") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_CENTER); else if (pos == "bot-left") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_BOTTOM_LEFT); else if (pos == "bot-right") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_BOTTOM_RIGHT); else if (pos == "top-left") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_TOP_LEFT); else if (pos == "top-right") gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_TOP_RIGHT); else /*if (pos == "right")*/ gtk_combo_box_set_active (GTK_COMBO_BOX (combo), POS_RIGHT); } if(opt.isSet(OptParser::GROW)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_grow"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::OFFSET)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_offset"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_offset"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::OFFSET).c_str())); } if(opt.isSet(OptParser::NORELOAD)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_noreload"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::TASKBAR)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_taskbar"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); } if(opt.isSet(OptParser::RSIZE)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_rsize"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_rsize"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::RSIZE).c_str())); } if(opt.isSet(OptParser::ISIZE)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_isize"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_isize"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::ISIZE).c_str())); } if(opt.isSet(OptParser::IDIST)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_idist"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_idist"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::IDIST).c_str())); } if(opt.isSet(OptParser::NANIM)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_nanim"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_nanim"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::NANIM).c_str())); } if(opt.isSet(OptParser::ZOOMF)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_zoomf"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_zoomf"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atof(opt.getArg(OptParser::ZOOMF).c_str())); } if(opt.isSet(OptParser::JUMPF)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_jumpf"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_jumpf"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atof(opt.getArg(OptParser::JUMPF).c_str())); } if(opt.isSet(OptParser::DBLCLK)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_dblclk"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_dblclk"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::DBLCLK).c_str())); } if(opt.isSet(OptParser::BALFA)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_balfa"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_balfa"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::BALFA).c_str())); } if(opt.isSet(OptParser::FALFA)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_falfa"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); spinbutton = glade_xml_get_widget (xml, "spinbutton_falfa"); gtk_spin_button_set_value (GTK_SPIN_BUTTON (spinbutton), atoi(opt.getArg(OptParser::FALFA).c_str())); } if(opt.isSet(OptParser::FILTER)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_filter"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); GtkWidget * combo = glade_xml_get_widget (xml, "combobox_filter"); std::string filter = opt.getArg(OptParser::FILTER); int f; std::stringstream ss(filter); ss >> f; if (f == 1) gtk_combo_box_set_active (GTK_COMBO_BOX (combo), FILTER_HOVERED); else if (f == 2) gtk_combo_box_set_active (GTK_COMBO_BOX (combo), FILTER_OTHERS); else if (f == 3) gtk_combo_box_set_active (GTK_COMBO_BOX (combo), FILTER_ALL); else /*if (filter == "none")*/ gtk_combo_box_set_active (GTK_COMBO_BOX (combo), FILTER_NONE); } if(opt.isSet(OptParser::FC)) { checkbutton = glade_xml_get_widget (xml, "checkbutton_fc"); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (checkbutton), true); std::string scolor = opt.getArg(OptParser::FC); std::string salpha = scolor.substr (2, 2); scolor = "#" + scolor.substr (4, 6); GdkColor rgb; GtkWidget * color = glade_xml_get_widget (xml, "colorbutton_fc"); gdk_color_parse (scolor.c_str(), &rgb); gtk_color_button_set_color (GTK_COLOR_BUTTON (color), &rgb); gtk_color_button_set_use_alpha (GTK_COLOR_BUTTON (color), TRUE); gtk_color_button_set_alpha (GTK_COLOR_BUTTON (color), 256*(strtol ( salpha.c_str(), NULL, 16 ) + 0.5)); } if (argc > 0) delete[] argv; } void set_signals() { glade_xml_signal_connect (xml, "on_dialog_settings_destroy", (GCallback) on_settings_close); glade_xml_signal_connect (xml, "on_menu_item_new_activate", (GCallback) on_settings_new); glade_xml_signal_connect (xml, "on_menu_item_edit_activate", (GCallback) on_settings_edit); glade_xml_signal_connect (xml, "on_menu_item_delete_activate", (GCallback) on_settings_delete); glade_xml_signal_connect (xml, "on_button_new_clicked", (GCallback) on_settings_new); glade_xml_signal_connect (xml, "on_button_edit_clicked", (GCallback) on_settings_edit); glade_xml_signal_connect (xml, "on_button_delete_clicked", (GCallback) on_settings_delete); glade_xml_signal_connect (xml, "on_button_up_activate", (GCallback) on_app_up); glade_xml_signal_connect (xml, "on_button_up_released", (GCallback) on_app_up); glade_xml_signal_connect (xml, "on_button_down_activate", (GCallback) on_app_down); glade_xml_signal_connect (xml, "on_button_down_released", (GCallback) on_app_down); glade_xml_signal_connect (xml, "on_button_app_accept_activate", (GCallback) on_app_accept); glade_xml_signal_connect (xml, "on_button_app_accept_released", (GCallback) on_app_accept); glade_xml_signal_connect (xml, "on_button_app_cancel_activate", (GCallback) on_app_cancel); glade_xml_signal_connect (xml, "on_button_app_cancel_released", (GCallback) on_app_cancel); glade_xml_signal_connect (xml, "on_button_update_activate", (GCallback) on_settings_update); glade_xml_signal_connect (xml, "on_button_update_released", (GCallback) on_settings_update); glade_xml_signal_connect (xml, "on_button_close_activate", (GCallback) on_settings_close); glade_xml_signal_connect (xml, "on_button_close_released", (GCallback) on_settings_close); glade_xml_signal_connect (xml, "on_menu_item_edit_activate", (GCallback) on_settings_edit); glade_xml_signal_connect (xml, "on_menu_item_delete_activate", (GCallback) on_settings_delete); glade_xml_signal_connect (xml, "on_button_command_activate", (GCallback) on_select_command); glade_xml_signal_connect (xml, "on_button_command_released", (GCallback) on_select_command); glade_xml_signal_connect (xml, "on_button_icon_activate", (GCallback) on_select_icon); glade_xml_signal_connect (xml, "on_button_icon_released", (GCallback) on_select_icon); glade_xml_signal_connect (xml, "on_button_image_name_activate", (GCallback) on_select_imagename); glade_xml_signal_connect (xml, "on_button_image_name_released", (GCallback) on_select_imagename); glade_xml_signal_connect (xml, "on_button_font_name_activate", (GCallback) on_select_fontname); glade_xml_signal_connect (xml, "on_button_font_name_released", (GCallback) on_select_fontname); glade_xml_signal_connect (xml, "on_treeview_app_cursor_changed", (GCallback) on_treeview_cursor_changed); glade_xml_signal_connect (xml, "on_combobox_icon_changed", (GCallback) on_icon_changed); glade_xml_signal_connect (xml, "on_button_about_activate", (GCallback) show_about); glade_xml_signal_connect (xml, "on_button_about_released", (GCallback) show_about); GtkWidget * check; GtkWidget * widget; check = glade_xml_get_widget (xml, "checkbutton_pos"); widget = glade_xml_get_widget (xml, "combobox_pos"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_offset"); widget = glade_xml_get_widget (xml, "spinbutton_offset"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_rsize"); widget = glade_xml_get_widget (xml, "spinbutton_rsize"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_isize"); widget = glade_xml_get_widget (xml, "spinbutton_isize"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_idist"); widget = glade_xml_get_widget (xml, "spinbutton_idist"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_nanim"); widget = glade_xml_get_widget (xml, "spinbutton_nanim"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_zoomf"); widget = glade_xml_get_widget (xml, "spinbutton_zoomf"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_jumpf"); widget = glade_xml_get_widget (xml, "spinbutton_jumpf"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_dblclk"); widget = glade_xml_get_widget (xml, "spinbutton_dblclk"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_balfa"); widget = glade_xml_get_widget (xml, "spinbutton_balfa"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_falfa"); widget = glade_xml_get_widget (xml, "spinbutton_falfa"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_filter"); widget = glade_xml_get_widget (xml, "combobox_filter"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); check = glade_xml_get_widget (xml, "checkbutton_fc"); widget = glade_xml_get_widget (xml, "colorbutton_fc"); g_signal_connect (G_OBJECT (check), "toggled", G_CALLBACK (checkbutton_toggled), widget); widget = glade_xml_get_widget (xml, "treeview_app"); GtkWidget * menu = glade_xml_get_widget (xml, "menu_popup"); g_signal_connect (G_OBJECT (widget), "button-release-event", G_CALLBACK (clickTreeView), menu); } void update_treeview() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkListStore *list_store = GTK_LIST_STORE (gtk_tree_view_get_model (GTK_TREE_VIEW (treeview))); gtk_list_store_clear(list_store); GtkTreeIter iter; GdkPixbuf *pix; Config config; std::list list = config.getAppList(); std::list ::iterator it; for (it = list.begin(), it++; it != list.end() ; it++) { App * app = (*it); if (app) { pix = get_icon(app->getIconName()); gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, \ TREE_COLUMN_ICON, pix, \ TREE_COLUMN_TITLE, app->getTitle().c_str(), \ TREE_COLUMN_COMMAND, app->getCommand().c_str(), \ TREE_COLUMN_ICON_NAME, app->getIconName().c_str(), -1); g_object_unref (pix); delete app; } } list.clear(); } GdkPixbuf * get_icon(std::string icon) { return get_icon_size(icon, 32, 32); } GdkPixbuf * get_icon_size(std::string icon, int width, int heigth) { if (icon.length() == 0) { return NULL; } GdkPixbuf *pixbuf = NULL; try { GError *error = NULL; pixbuf = gdk_pixbuf_new_from_file (icon.c_str(), &error); if (!pixbuf) { g_error_free (error); return NULL; } GdkPixbuf *pixbuf_scaled = NULL; pixbuf_scaled = gdk_pixbuf_scale_simple (pixbuf, width, heigth, GDK_INTERP_BILINEAR); g_object_unref (pixbuf); return pixbuf_scaled; } catch(...) { } return NULL; } void on_settings_new() { edit = false; GtkWidget * title = glade_xml_get_widget (xml, "entry_title"); GtkWidget * command = glade_xml_get_widget (xml, "entry_command"); GtkWidget * icon = glade_xml_get_widget (xml, "entry_icon"); gtk_entry_set_text (GTK_ENTRY(title), ""); gtk_entry_set_text (GTK_ENTRY(command), ""); gtk_entry_set_text (GTK_ENTRY(icon), ""); GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); gtk_window_set_title (GTK_WINDOW (dialog), _("New")); g_signal_connect (G_OBJECT (dialog), "delete-event", G_CALLBACK (widget_hide), NULL); gtk_widget_show (dialog); } void on_settings_edit() { edit = true; GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkTreeSelection *selection; GtkTreeModel *model; GtkTreeIter iter; selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { GtkWidget * title = glade_xml_get_widget (xml, "entry_title"); GtkWidget * command = glade_xml_get_widget (xml, "entry_command"); GtkWidget * icon = glade_xml_get_widget (xml, "entry_icon"); gchar *name; gtk_tree_model_get (model, &iter, TREE_COLUMN_TITLE, &name, -1); gtk_entry_set_text (GTK_ENTRY(title), name); g_free(name); gtk_tree_model_get (model, &iter, TREE_COLUMN_COMMAND, &name, -1); gtk_entry_set_text (GTK_ENTRY(command), name); g_free(name); gtk_tree_model_get (model, &iter, TREE_COLUMN_ICON_NAME, &name, -1); gtk_entry_set_text (GTK_ENTRY(icon), name); g_free(name); GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); gtk_window_set_title (GTK_WINDOW (dialog), _("Edit")); g_signal_connect (G_OBJECT (dialog), "delete-event", G_CALLBACK (widget_hide), NULL); gtk_widget_show (dialog); } } void on_settings_delete() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkTreeSelection *selection; GtkTreeModel *model; GtkTreeIter iter; selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { gtk_list_store_remove(GTK_LIST_STORE(model), &iter); set_status_button(); } } void on_settings_update() { Config config; std::string filename = configFile.empty() ? config.getFile() : configFile; std::ofstream file(filename.c_str()); if (!file.is_open()) { GtkWidget * dialog = gtk_message_dialog_new (GTK_WINDOW(glade_xml_get_widget (xml, "dialog_settings")), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, "%s",(_("Error save config in ") + filename).c_str()); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); } GtkWidget * spinbutton; GtkWidget * entry; std::string imageName, fontName; int fontSize; spinbutton = glade_xml_get_widget (xml, "spinbutton_font_size"); fontSize = gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton)); entry = glade_xml_get_widget (xml, "entry_font_name"); fontName = gtk_entry_get_text (GTK_ENTRY (entry)); entry = glade_xml_get_widget (xml, "entry_image_name"); imageName = gtk_entry_get_text (GTK_ENTRY (entry)); std::string fullcommand = getCommand(); file << "i: " << imageName << std::endl; file << "c: " << fullcommand << std::endl; file << "t: " << fontName << "/" << fontSize << std::endl; file << std::endl; GtkTreeIter iter; gboolean valid; GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkListStore *list_store = GTK_LIST_STORE (gtk_tree_view_get_model (GTK_TREE_VIEW (treeview))); valid = gtk_tree_model_get_iter_first(GTK_TREE_MODEL(list_store), &iter); while (valid) { gchar *icon, *command, *title; gtk_tree_model_get (GTK_TREE_MODEL(list_store), &iter, TREE_COLUMN_ICON_NAME, &icon, -1); gtk_tree_model_get (GTK_TREE_MODEL(list_store), &iter, TREE_COLUMN_COMMAND, &command, -1); gtk_tree_model_get (GTK_TREE_MODEL(list_store), &iter, TREE_COLUMN_TITLE, &title, -1); file << "i: " << icon << std::endl; file << "c: " << command << std::endl; file << "t: " << title << std::endl; file << std::endl; g_free(icon); g_free(command); g_free(title); valid = gtk_tree_model_iter_next(GTK_TREE_MODEL(list_store), &iter); } file.close(); Run run; if (!configFile.empty()) { fullcommand = PACKAGE_NAME; fullcommand += " --config "; fullcommand += configFile; } run.restart(fullcommand); } void on_settings_close() { gtk_main_quit(); } std::string getCommand() { std::string command; command = PACKAGE_NAME; GtkWidget * checkbutton = NULL; GtkWidget * spinbutton = NULL; checkbutton = glade_xml_get_widget (xml, "checkbutton_bpress"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --bpress"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_above_desk"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --above-desk"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_vbar"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --vbar"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_nofont"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --nofont"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_pos"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --pos"; GtkWidget * combo = glade_xml_get_widget (xml, "combobox_pos"); switch((int)gtk_combo_box_get_active (GTK_COMBO_BOX (combo))) { case POS_TOP: command += " top"; break; case POS_BOTTOM: command += " bottom"; break; case POS_LEFT: command += " left"; break; case POS_RIGHT: command += " right"; break; case POS_CENTER: command += " center"; break; case POS_BOTTOM_LEFT: command += " bot-left"; break; case POS_BOTTOM_RIGHT: command += " bot-right"; break; case POS_TOP_LEFT: command += " top-left"; break; case POS_TOP_RIGHT: command += " top-right"; break; } } checkbutton = glade_xml_get_widget (xml, "checkbutton_grow"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --grow"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_offset"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --offset"; spinbutton = glade_xml_get_widget (xml, "spinbutton_offset"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_noreload"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --noreload"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_taskbar"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --taskbar"; } checkbutton = glade_xml_get_widget (xml, "checkbutton_rsize"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --rsize"; spinbutton = glade_xml_get_widget (xml, "spinbutton_rsize"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_isize"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --isize"; spinbutton = glade_xml_get_widget (xml, "spinbutton_isize"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_idist"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --idist"; spinbutton = glade_xml_get_widget (xml, "spinbutton_idist"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_nanim"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --nanim"; spinbutton = glade_xml_get_widget (xml, "spinbutton_nanim"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_zoomf"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --zoomf"; spinbutton = glade_xml_get_widget (xml, "spinbutton_zoomf"); sprintf(text, " %f", (float)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_jumpf"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --jumpf"; spinbutton = glade_xml_get_widget (xml, "spinbutton_jumpf"); sprintf(text, " %f", (float)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_dblclk"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --dblclk"; spinbutton = glade_xml_get_widget (xml, "spinbutton_dblclk"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_balfa"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --balfa"; spinbutton = glade_xml_get_widget (xml, "spinbutton_balfa"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_falfa"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { char text[10]; command += " --falfa"; spinbutton = glade_xml_get_widget (xml, "spinbutton_falfa"); sprintf(text, " %d", (int)gtk_spin_button_get_value (GTK_SPIN_BUTTON (spinbutton))); command += text; } checkbutton = glade_xml_get_widget (xml, "checkbutton_filter"); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { command += " --filter"; GtkWidget * combo = glade_xml_get_widget (xml, "combobox_filter"); switch((int)gtk_combo_box_get_active (GTK_COMBO_BOX (combo))) { case FILTER_NONE: command += " 0"; break; case FILTER_HOVERED: command += " 1"; break; case FILTER_OTHERS: command += " 2"; break; case FILTER_ALL: command += " 3"; break; } } checkbutton = glade_xml_get_widget (xml, "checkbutton_fc"); if(gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (checkbutton))) { GtkWidget * color = glade_xml_get_widget (xml, "colorbutton_fc"); GdkColor rgb; gchar text[16]; gtk_color_button_get_color (GTK_COLOR_BUTTON (color), &rgb); int alpha = gtk_color_button_get_alpha (GTK_COLOR_BUTTON (color)); g_snprintf (text, sizeof (text), "0x%02x%02x%02x%02x", alpha >> 8, rgb.red >> 8, rgb.green >> 8, rgb.blue >> 8); command += " --fc "; command += text; } return command; } bool validate() { GtkWidget * title = glade_xml_get_widget (xml, "entry_title"); GtkWidget * command = glade_xml_get_widget (xml, "entry_command"); GtkWidget * icon = glade_xml_get_widget (xml, "entry_icon"); std::string text_title, text_command, text_icon; text_title = (gchar*)gtk_entry_get_text (GTK_ENTRY(title)); text_command = (gchar*)gtk_entry_get_text (GTK_ENTRY(command)); text_icon = (gchar*)gtk_entry_get_text (GTK_ENTRY(icon)); bool resp = text_title != "" && text_command != "" && text_icon != ""; if (!resp) { GtkWidget * dialog = gtk_message_dialog_new (GTK_WINDOW(glade_xml_get_widget (xml, "dialog_settings")), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_WARNING, GTK_BUTTONS_OK, _("Fields must not be empty")); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); } return resp; } void on_app_accept() { if (!validate()) return; GtkWidget * title = glade_xml_get_widget (xml, "entry_title"); GtkWidget * command = glade_xml_get_widget (xml, "entry_command"); GtkWidget * icon = glade_xml_get_widget (xml, "entry_icon"); std::string text_title, text_command, text_icon; text_title = (gchar*)gtk_entry_get_text (GTK_ENTRY(title)); text_command = (gchar*)gtk_entry_get_text (GTK_ENTRY(command)); text_icon = (gchar*)gtk_entry_get_text (GTK_ENTRY(icon)); GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkTreeModel * model = gtk_tree_view_get_model (GTK_TREE_VIEW (treeview)); GtkListStore * list_store = GTK_LIST_STORE (model); GtkTreeIter iter; if (!edit) { gtk_list_store_append (list_store, &iter); gtk_list_store_set (list_store, &iter, \ TREE_COLUMN_ICON, get_icon(text_icon), \ TREE_COLUMN_TITLE, text_title.c_str(), \ TREE_COLUMN_COMMAND, text_command.c_str(), \ TREE_COLUMN_ICON_NAME, text_icon.c_str(), -1); } else { GtkTreeSelection * selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { gtk_list_store_set (list_store, &iter, \ TREE_COLUMN_ICON, get_icon(text_icon), \ TREE_COLUMN_TITLE, text_title.c_str(), \ TREE_COLUMN_COMMAND, text_command.c_str(), \ TREE_COLUMN_ICON_NAME, text_icon.c_str(), -1); } } GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); gtk_widget_hide (dialog); } void on_app_cancel() { GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); gtk_widget_hide (dialog); } void on_app_up() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkTreeSelection *selection; GtkTreeModel *model; GtkTreeIter iter; selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { GtkTreePath *path = gtk_tree_model_get_path (model,&iter); GtkTreePath *prev = gtk_tree_path_copy (path); gtk_tree_path_prev(prev); GtkTreeIter before; gtk_tree_model_get_iter(model, &before, prev); gtk_list_store_move_before (GTK_LIST_STORE(model), &iter, &before); gtk_tree_path_free (path); gtk_tree_path_free (prev); set_status_button(); } } void on_app_down() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkTreeSelection *selection; GtkTreeModel *model; GtkTreeIter iter; selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { GtkTreeIter * next = gtk_tree_iter_copy (&iter); gtk_tree_model_iter_next (model, next); gtk_list_store_move_after (GTK_LIST_STORE(model), &iter, next); gtk_tree_iter_free (next); set_status_button(); } } void on_icon_changed() { } void on_treeview_cursor_changed () { set_status_button(); } void set_status_button() { GtkWidget * treeview = glade_xml_get_widget (xml, "treeview_app"); GtkWidget * button_edit = glade_xml_get_widget (xml, "button_edit"); GtkWidget * button_delete = glade_xml_get_widget (xml, "button_delete"); GtkWidget * button_up = glade_xml_get_widget (xml, "button_up"); GtkWidget * button_down = glade_xml_get_widget (xml, "button_down"); GtkTreeSelection *selection; GtkTreeModel *model; GtkTreeIter iter; selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); if (gtk_tree_selection_get_selected(selection, &model, &iter)) { GtkTreePath *path = gtk_tree_model_get_path (model,&iter); gint * index = gtk_tree_path_get_indices(path); if (index) { gtk_widget_set_sensitive(button_edit, true); gtk_widget_set_sensitive(button_delete, true); gtk_widget_set_sensitive(button_up, index[0] > 0); gtk_widget_set_sensitive(button_down, gtk_tree_model_iter_next(model, &iter)); gtk_tree_path_free (path); return; } gtk_tree_path_free (path); } gtk_widget_set_sensitive(button_edit, false); gtk_widget_set_sensitive(button_delete, false); gtk_widget_set_sensitive(button_up, false); gtk_widget_set_sensitive(button_down, false); } gboolean clickTreeView(GtkWidget * widget, GdkEventButton * event, gpointer data) { if (event->button == 3) { GtkWidget * menu = static_cast(data); gtk_menu_popup (GTK_MENU(menu), NULL, NULL, NULL, NULL, event->button, event->time); return true; } return false; } void on_select_command() { GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); GtkWidget * file = gtk_file_chooser_dialog_new (_("Open exec file"), GTK_WINDOW(dialog), GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT, NULL); GtkWidget * command = glade_xml_get_widget (xml, "entry_command"); std::string filename = gtk_entry_get_text (GTK_ENTRY(command)); gtk_file_chooser_set_filename (GTK_FILE_CHOOSER (file), filename == "" ? "/usr/bin" : filename.c_str()); if (gtk_dialog_run (GTK_DIALOG (file)) == GTK_RESPONSE_ACCEPT) { filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (file)); gtk_entry_set_text (GTK_ENTRY(command), filename.c_str()); } gtk_widget_destroy (file); } void on_select_icon() { GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_app"); GtkWidget * file = gtk_file_chooser_dialog_new (_("Open image file"), GTK_WINDOW(dialog), GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT, NULL); GtkWidget * icon = glade_xml_get_widget (xml, "entry_icon"); GtkFileFilter *filter = gtk_file_filter_new(); gtk_file_filter_add_pixbuf_formats(filter); gtk_file_filter_set_name (filter, _("Images")); std::string filename = gtk_entry_get_text (GTK_ENTRY(icon)); gtk_file_chooser_set_filename (GTK_FILE_CHOOSER (file), filename == "" ? PIXMAPDIR : filename.c_str()); gtk_file_chooser_add_filter (GTK_FILE_CHOOSER (file), filter); if (gtk_dialog_run (GTK_DIALOG (file)) == GTK_RESPONSE_ACCEPT) { filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (file)); gtk_entry_set_text (GTK_ENTRY(icon), filename.c_str()); } gtk_widget_destroy (file); } void on_select_fontname() { GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_settings"); GtkWidget * file = gtk_file_chooser_dialog_new (_("Open font file"), GTK_WINDOW(dialog), GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT, NULL); GtkWidget * font = glade_xml_get_widget (xml, "entry_font_name"); GtkFileFilter *filter = gtk_file_filter_new(); gtk_file_filter_set_name (filter, _("Fonts")); gtk_file_filter_add_pattern(GTK_FILE_FILTER(filter), "*.ttf"); std::string filename = gtk_entry_get_text (GTK_ENTRY(font)); gtk_file_chooser_set_filename (GTK_FILE_CHOOSER (file), filename.c_str()); gtk_file_chooser_add_filter (GTK_FILE_CHOOSER (file), filter); if (gtk_dialog_run (GTK_DIALOG (file)) == GTK_RESPONSE_ACCEPT) { Utils util; filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (file)); filename = util.replace(filename, ".ttf", ""); gtk_entry_set_text (GTK_ENTRY(font), filename.c_str()); } gtk_widget_destroy (file); } void on_select_imagename() { GtkWidget * dialog = glade_xml_get_widget (xml, "dialog_settings"); GtkWidget * file = gtk_file_chooser_dialog_new (_("Open image file"), GTK_WINDOW(dialog), GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT, NULL); GtkWidget * icon = glade_xml_get_widget (xml, "entry_image_name"); GtkFileFilter *filter = gtk_file_filter_new(); gtk_file_filter_add_pixbuf_formats(filter); gtk_file_filter_set_name (filter, _("Images")); std::string filename = gtk_entry_get_text (GTK_ENTRY(icon)); gtk_file_chooser_set_filename (GTK_FILE_CHOOSER (file), filename.c_str()); gtk_file_chooser_add_filter (GTK_FILE_CHOOSER (file), filter); if (gtk_dialog_run (GTK_DIALOG (file)) == GTK_RESPONSE_ACCEPT) { filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (file)); gtk_entry_set_text (GTK_ENTRY(icon), filename.c_str()); } gtk_widget_destroy (file); } void checkbutton_toggled (GtkToggleButton *togglebutton, gpointer data) { GtkWidget * widget = static_cast(data); gtk_widget_set_sensitive (widget, gtk_toggle_button_get_active (togglebutton)); } gboolean widget_hide(GtkWidget * widget, GdkEvent * event, gpointer data) { gtk_widget_hide (widget); return true; } void show_about() { GdkPixbuf * pixbuf; pixbuf = gdk_pixbuf_new_from_file (ICON_DEFAULT, NULL); GtkWidget * settings = glade_xml_get_widget (xml, "dialog_settings"); gtk_show_about_dialog ( gtk_widget_get_tooltip_window (settings), "title", _("About"), "icon", pixbuf, "program-name", _("wbar config"), "version", VERSION, "copyright", _("License GPL - 2010"), "comments", _("A light and fast launch bar."), "website", "http://code.google.com/p/wbar/", "website-label", _("wbar project website"), "authors", authors, "documenters", documenters, "translator-credits", translater, "logo", pixbuf, NULL); } wbar-2.3.4/src/config/MainConfig.cc0000644000175000017500000000131011667227666017100 0ustar00sotosoto00000000000000#include #include #include #include #include #include #include "Functions.h" #include "i18n.h" void signals(int sig) { while(waitpid(-1 ,NULL, WNOHANG)>0); } int main(int argc, char **argv) { #ifdef ENABLE_NLS setlocale( LC_ALL, "" ); bindtextdomain(GETTEXT_PACKAGE, GNOMELOCALEDIR); bind_textdomain_codeset(GETTEXT_PACKAGE, "UTF-8"); textdomain(GETTEXT_PACKAGE); #endif struct sigaction sigh; sigh.sa_handler = signals; sigh.sa_flags = 0; sigemptyset(&sigh.sa_mask); sigaction(SIGCHLD, &sigh, NULL); gtk_init (&argc, &argv); view_settings(); gtk_main (); return 0; } wbar-2.3.4/src/config/Run.h0000644000175000017500000000054311667227666015503 0ustar00sotosoto00000000000000#ifndef __RUN__H__ #define __RUN__H__ #include #include class Run { public: Run(); ~Run(); int getPID(); char ** getArg(int &argc); bool restart(std::string command); bool start(std::list list); bool start(std::string command); void stop(); }; #endif wbar-2.3.4/src/Makefile.am0000644000175000017500000000271311724152440015333 0ustar00sotosoto00000000000000CLEANFILES = *~ bin_PROGRAMS = wbar AM_CPPFLAGS = \ -DPACKAGE_LOCALE_DIR=\""$(prefix)/$(DATADIRNAME)/locale"\" \ -DPACKAGE_SRC_DIR=\""$(srcdir)"\" \ -DPACKAGE_DATA_DIR=\""$(datadir)"\" \ -Wall \ -Wunused \ -Werror \ -I$(top_srcdir)/src/utils if WBAR_CONFIG bin_PROGRAMS += wbar-config endif wbar_SOURCES = \ $(top_srcdir)/src/core/Bar.cc \ $(top_srcdir)/src/core/Bar.h \ $(top_srcdir)/src/core/Icon.cc \ $(top_srcdir)/src/core/Icon.h \ $(top_srcdir)/src/core/ImgWrap.h \ $(top_srcdir)/src/core/Main.cc \ $(top_srcdir)/src/core/SuperBar.cc \ $(top_srcdir)/src/core/SuperBar.h \ $(top_srcdir)/src/core/SuperIcon.cc \ $(top_srcdir)/src/core/SuperIcon.h \ $(top_srcdir)/src/core/XWin.cc \ $(top_srcdir)/src/core/XWin.h \ $(UTILS) if WBAR_CONFIG wbar_config_SOURCES = \ $(top_srcdir)/src/config/Run.h \ $(top_srcdir)/src/config/Run.cc \ $(top_srcdir)/src/config/Functions.cc \ $(top_srcdir)/src/config/Functions.h \ $(top_srcdir)/src/config/MainConfig.cc \ $(UTILS) endif UTILS = \ $(top_srcdir)/src/utils/App.cc \ $(top_srcdir)/src/utils/App.h \ $(top_srcdir)/src/utils/Config.cc \ $(top_srcdir)/src/utils/Config.h \ $(top_srcdir)/src/utils/Utils.cc \ $(top_srcdir)/src/utils/Utils.h \ $(top_srcdir)/src/utils/OptParser.cc \ $(top_srcdir)/src/utils/OptParser.h \ $(top_srcdir)/src/utils/i18n.h wbar_CXXFLAGS = @modules_CFLAGS@ wbar_LDADD = @modules_LIBS@ @INTLLIBS@ if WBAR_CONFIG wbar_config_CXXFLAGS = @gui_modules_CFLAGS@ wbar_config_LDADD = @gui_modules_LIBS@ endif wbar-2.3.4/src/utils/0000755000175000017500000000000012027635465014446 5ustar00sotosoto00000000000000wbar-2.3.4/src/utils/App.h0000644000175000017500000000072611724152440015332 0ustar00sotosoto00000000000000#ifndef _APP_H_ #define _APP_H_ #include class App { public: App(std::string icon, std::string command, std::string title, unsigned long winid); ~App(); std::string getIconName(); std::string getCommand(); std::string getTitle(); unsigned long getWinid(); private: std::string icon; std::string command; std::string title; unsigned long winid; }; #endif wbar-2.3.4/src/utils/OptParser.h0000644000175000017500000000121511725513314016525 0ustar00sotosoto00000000000000#ifndef _OPTPARSER_ #define _OPTPARSER_ #include #include class OptParser { public: enum Options { CONFIG, BPRESS, ABOVE_DESK, VBAR, NOFONT, POS, GROW, ISIZE, IDIST, NANIM, ZOOMF, JUMPF, DBLCLK, BALFA, FALFA, FILTER, FC, OFFSET, NORELOAD, TASKBAR, RSIZE, HELP = 'h', VERS = 'v' }; OptParser(int argc, char **argv); ~OptParser(); bool isSet(Options opt); std::string getArg(Options opt); char ** getArgv(); private: int argc; char **argv; }; #endif /* _OPTPARSER_ */ wbar-2.3.4/src/utils/i18n.h0000644000175000017500000000034111667227666015405 0ustar00sotosoto00000000000000#ifndef __I18N_H__ #define __I18N_H__ #ifdef HAVE_CONFIG_H #include #endif #ifdef ENABLE_NLS #include #define _(String) (const char *) gettext(String) #else #define _(String) (String) #endif #endif wbar-2.3.4/src/utils/OptParser.cc0000644000175000017500000000334611725513330016670 0ustar00sotosoto00000000000000#include "OptParser.h" static struct option long_options[] = { {"config", 1, 0, 0}, {"bpress", 0, 0, 0}, {"above-desk", 0, 0, 0}, {"vbar", 0, 0, 0}, {"nofont", 0, 0, 0}, {"pos", 1, 0, 0}, {"grow", 0, 0, 0}, {"isize", 1, 0, 0}, {"idist", 1, 0, 0}, {"nanim", 1, 0, 0}, {"zoomf", 1, 0, 0}, {"jumpf", 1, 0, 0}, {"dblclk", 1, 0, 0}, {"balfa", 1, 0, 0}, {"falfa", 1, 0, 0}, {"filter", 1, 0, 0}, {"fc", 1, 0, 0}, {"offset", 1, 0, 0 }, {"noreload", 0, 0, 0 }, {"taskbar", 0, 0, 0 }, {"rsize", 1, 0, 0 }, {"help", 0, 0, OptParser::HELP}, {"version", 0, 0, OptParser::VERS}, {0, 0, 0, 0} }; OptParser::OptParser(int argc, char **argv) { this->argc = argc; this->argv = argv; } OptParser::~OptParser() { } bool OptParser::isSet(OptParser::Options opt) { if (argc <= 1) return false; int c; optarg = NULL; optind = opterr = optopt = 0; while (1) { int option_index = 0; c = getopt_long(argc, argv, "hcv", long_options, &option_index); if (c == -1) break; if (option_index == (int)opt) return true; if (c == (int) HELP && opt == HELP) return true; if (c == (int) VERS && opt == VERS) return true; } return false; } std::string OptParser::getArg(OptParser::Options opt) { if (argc <= 1) return ""; int c; optarg = NULL; optind = opterr = optopt = 0; while (1) { int option_index = 0; c = getopt_long(argc, argv, "hcv", long_options, &option_index); if (c == -1) break; if (!optarg) continue; if (option_index == (int)opt) return optarg; } return ""; } char ** OptParser::getArgv () { return this->argv; } wbar-2.3.4/src/utils/Utils.h0000644000175000017500000000060111667227666015725 0ustar00sotosoto00000000000000#ifndef __UTILS__H__ #define __UTILS__H__ #include #include class Utils { public: Utils(); ~Utils(); std::string replace(std::string orig, std::string find, std::string replace); std::list split(std::string text, std::string sep); std::string join(std::list list, std::string sep); }; #endif wbar-2.3.4/src/utils/Config.cc0000644000175000017500000000515411724152440016155 0ustar00sotosoto00000000000000#include "Config.h" #include "Utils.h" #include #include #include #include #include #include #include #include #include #include #include #include #include "i18n.h" Config::Config() { configFile = ""; } Config::~Config() { } std::string Config::getFile() { if (configFile != "") { return configFile; } std::string homeDir = getenv("HOME"); std::string configFile = homeDir + "/.wbar"; struct stat cfg_stat; if (stat(configFile.c_str(), &cfg_stat)) { std::string command = ""; command += "cp "; command += DEFAULT_CONFIGDIR"/wbar.cfg "; command += configFile; if (system(command.c_str()) != 0) { std::cout << _("Error copy file: ") << DEFAULT_CONFIGDIR"/wbar.cfg" << std::endl; } } return configFile; } std::list < App * > Config::getAppList() { std::list < App * > list; std::ifstream file(getFile().c_str()); if (!file.is_open()) { return list; } regex_t r_icon, r_title, r_command; regmatch_t pmatch[2]; regcomp(&r_icon, "^[[:space:]]*[^#]*i:[[:space:]]*(.*)", REG_EXTENDED); regcomp(&r_command, "^[[:space:]]*[^#]*c:[[:space:]]*(.*)", REG_EXTENDED); regcomp(&r_title, "^[[:space:]]*[^#]*t:[[:space:]]*(.*)", REG_EXTENDED); char buffer[256]; std::string icon, command, title; int element = 0; while (file.getline(buffer, sizeof(buffer))) { if (!regexec(&r_icon, buffer, 2, pmatch, 0)) { icon = std::string(buffer + pmatch[1].rm_so, pmatch[1].rm_eo - pmatch[1].rm_so); element++; } else if (!regexec(&r_command, buffer, 2, pmatch, 0)) { command = std::string(buffer + pmatch[1].rm_so, pmatch[1].rm_eo - pmatch[1].rm_so); element++; } else if (!regexec(&r_title, buffer, 2, pmatch, 0)) { title = std::string(buffer + pmatch[1].rm_so, pmatch[1].rm_eo - pmatch[1].rm_so); element++; } if (element == 3) { if (icon != "" && command != "" && title != "") { App *app = new App(icon, command, title, 0); list.push_back(app); } icon = command = title = ""; element = 0; } } regfree(&r_icon); regfree(&r_command); regfree(&r_title); file.close(); return list; } void Config::setFile( std::string configFile ) { this->configFile = configFile; } wbar-2.3.4/src/utils/App.cc0000644000175000017500000000067711724152440015475 0ustar00sotosoto00000000000000#include "App.h" App::App(std::string icon, std::string command, std::string title, unsigned long winid) { this->icon = icon; this->command = command; this->title = title; this->winid = winid; } App::~App() { } std::string App::getIconName() { return icon; } std::string App::getCommand() { return command; } std::string App::getTitle() { return title; } unsigned long App::getWinid() { return winid; } wbar-2.3.4/src/utils/Config.h0000644000175000017500000000046711667227666016044 0ustar00sotosoto00000000000000#ifndef _CONFIG_H_ #define _CONFIG_H_ #include #include #include "App.h" class Config { public: Config(); ~Config(); std::string getFile(); void setFile( std::string configFile ); std::list < App * > getAppList(); private: std::string configFile; }; #endif wbar-2.3.4/src/utils/Utils.cc0000644000175000017500000000253311667227666016071 0ustar00sotosoto00000000000000#include "Utils.h" #include #include #include #include #include #include #include #include #include Utils::Utils() { } Utils::~Utils() { } std::string Utils::replace(std::string orig, std::string find, std::string replace) { while (orig.find(find) != std::string::npos) { orig.replace(orig.find(find),find.length(),replace); } return orig; } std::list Utils::split(std::string text, std::string sep) { std::list list; unsigned long i; unsigned long y; std::string data, aux; while (!text.empty() && (i = text.find(sep)) != std::string::npos) { y = 0; data = ""; aux = ""; while (y != i) { data += text[y++]; } if (data.length() > 0) list.push_back(data); y++; while(y != text.length()) { aux += text[y++]; } text = aux; } if (text.length() > 0) list.push_back(text); return list; } std::string Utils::join(std::list list, std::string sep) { std::string text; std::list::iterator it; for (it = list.begin();it != list.end();it++) { text += sep + (*it); } return text; } wbar-2.3.4/src/Makefile.in0000644000175000017500000015170512027635265015362 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = wbar$(EXEEXT) $(am__EXEEXT_1) @WBAR_CONFIG_TRUE@am__append_1 = wbar-config subdir = src DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = @WBAR_CONFIG_TRUE@am__EXEEXT_1 = wbar-config$(EXEEXT) am__installdirs = "$(DESTDIR)$(bindir)" PROGRAMS = $(bin_PROGRAMS) am__objects_1 = wbar-App.$(OBJEXT) wbar-Config.$(OBJEXT) \ wbar-Utils.$(OBJEXT) wbar-OptParser.$(OBJEXT) am_wbar_OBJECTS = wbar-Bar.$(OBJEXT) wbar-Icon.$(OBJEXT) \ wbar-Main.$(OBJEXT) wbar-SuperBar.$(OBJEXT) \ wbar-SuperIcon.$(OBJEXT) wbar-XWin.$(OBJEXT) $(am__objects_1) wbar_OBJECTS = $(am_wbar_OBJECTS) wbar_DEPENDENCIES = wbar_LINK = $(CXXLD) $(wbar_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ am__wbar_config_SOURCES_DIST = $(top_srcdir)/src/config/Run.h \ $(top_srcdir)/src/config/Run.cc \ $(top_srcdir)/src/config/Functions.cc \ $(top_srcdir)/src/config/Functions.h \ $(top_srcdir)/src/config/MainConfig.cc \ $(top_srcdir)/src/utils/App.cc $(top_srcdir)/src/utils/App.h \ $(top_srcdir)/src/utils/Config.cc \ $(top_srcdir)/src/utils/Config.h \ $(top_srcdir)/src/utils/Utils.cc \ $(top_srcdir)/src/utils/Utils.h \ $(top_srcdir)/src/utils/OptParser.cc \ $(top_srcdir)/src/utils/OptParser.h \ $(top_srcdir)/src/utils/i18n.h am__objects_2 = wbar_config-App.$(OBJEXT) wbar_config-Config.$(OBJEXT) \ wbar_config-Utils.$(OBJEXT) wbar_config-OptParser.$(OBJEXT) @WBAR_CONFIG_TRUE@am_wbar_config_OBJECTS = wbar_config-Run.$(OBJEXT) \ @WBAR_CONFIG_TRUE@ wbar_config-Functions.$(OBJEXT) \ @WBAR_CONFIG_TRUE@ wbar_config-MainConfig.$(OBJEXT) \ @WBAR_CONFIG_TRUE@ $(am__objects_2) wbar_config_OBJECTS = $(am_wbar_config_OBJECTS) wbar_config_DEPENDENCIES = wbar_config_LINK = $(CXXLD) $(wbar_config_CXXFLAGS) $(CXXFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ -o $@ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(wbar_SOURCES) $(wbar_config_SOURCES) DIST_SOURCES = $(wbar_SOURCES) $(am__wbar_config_SOURCES_DIST) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ AM_CPPFLAGS = \ -DPACKAGE_LOCALE_DIR=\""$(prefix)/$(DATADIRNAME)/locale"\" \ -DPACKAGE_SRC_DIR=\""$(srcdir)"\" \ -DPACKAGE_DATA_DIR=\""$(datadir)"\" \ -Wall \ -Wunused \ -Werror \ -I$(top_srcdir)/src/utils wbar_SOURCES = \ $(top_srcdir)/src/core/Bar.cc \ $(top_srcdir)/src/core/Bar.h \ $(top_srcdir)/src/core/Icon.cc \ $(top_srcdir)/src/core/Icon.h \ $(top_srcdir)/src/core/ImgWrap.h \ $(top_srcdir)/src/core/Main.cc \ $(top_srcdir)/src/core/SuperBar.cc \ $(top_srcdir)/src/core/SuperBar.h \ $(top_srcdir)/src/core/SuperIcon.cc \ $(top_srcdir)/src/core/SuperIcon.h \ $(top_srcdir)/src/core/XWin.cc \ $(top_srcdir)/src/core/XWin.h \ $(UTILS) @WBAR_CONFIG_TRUE@wbar_config_SOURCES = \ @WBAR_CONFIG_TRUE@$(top_srcdir)/src/config/Run.h \ @WBAR_CONFIG_TRUE@$(top_srcdir)/src/config/Run.cc \ @WBAR_CONFIG_TRUE@$(top_srcdir)/src/config/Functions.cc \ @WBAR_CONFIG_TRUE@$(top_srcdir)/src/config/Functions.h \ @WBAR_CONFIG_TRUE@$(top_srcdir)/src/config/MainConfig.cc \ @WBAR_CONFIG_TRUE@$(UTILS) UTILS = \ $(top_srcdir)/src/utils/App.cc \ $(top_srcdir)/src/utils/App.h \ $(top_srcdir)/src/utils/Config.cc \ $(top_srcdir)/src/utils/Config.h \ $(top_srcdir)/src/utils/Utils.cc \ $(top_srcdir)/src/utils/Utils.h \ $(top_srcdir)/src/utils/OptParser.cc \ $(top_srcdir)/src/utils/OptParser.h \ $(top_srcdir)/src/utils/i18n.h wbar_CXXFLAGS = @modules_CFLAGS@ wbar_LDADD = @modules_LIBS@ @INTLLIBS@ @WBAR_CONFIG_TRUE@wbar_config_CXXFLAGS = @gui_modules_CFLAGS@ @WBAR_CONFIG_TRUE@wbar_config_LDADD = @gui_modules_LIBS@ all: all-am .SUFFIXES: .SUFFIXES: .cc .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) wbar$(EXEEXT): $(wbar_OBJECTS) $(wbar_DEPENDENCIES) @rm -f wbar$(EXEEXT) $(wbar_LINK) $(wbar_OBJECTS) $(wbar_LDADD) $(LIBS) wbar-config$(EXEEXT): $(wbar_config_OBJECTS) $(wbar_config_DEPENDENCIES) @rm -f wbar-config$(EXEEXT) $(wbar_config_LINK) $(wbar_config_OBJECTS) $(wbar_config_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-App.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-Bar.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-Config.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-Icon.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-Main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-OptParser.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-SuperBar.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-SuperIcon.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-Utils.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar-XWin.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-App.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-Config.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-Functions.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-MainConfig.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-OptParser.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-Run.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wbar_config-Utils.Po@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` wbar-Bar.o: $(top_srcdir)/src/core/Bar.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Bar.o -MD -MP -MF $(DEPDIR)/wbar-Bar.Tpo -c -o wbar-Bar.o `test -f '$(top_srcdir)/src/core/Bar.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Bar.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Bar.Tpo $(DEPDIR)/wbar-Bar.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Bar.cc' object='wbar-Bar.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Bar.o `test -f '$(top_srcdir)/src/core/Bar.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Bar.cc wbar-Bar.obj: $(top_srcdir)/src/core/Bar.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Bar.obj -MD -MP -MF $(DEPDIR)/wbar-Bar.Tpo -c -o wbar-Bar.obj `if test -f '$(top_srcdir)/src/core/Bar.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Bar.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Bar.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Bar.Tpo $(DEPDIR)/wbar-Bar.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Bar.cc' object='wbar-Bar.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Bar.obj `if test -f '$(top_srcdir)/src/core/Bar.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Bar.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Bar.cc'; fi` wbar-Icon.o: $(top_srcdir)/src/core/Icon.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Icon.o -MD -MP -MF $(DEPDIR)/wbar-Icon.Tpo -c -o wbar-Icon.o `test -f '$(top_srcdir)/src/core/Icon.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Icon.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Icon.Tpo $(DEPDIR)/wbar-Icon.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Icon.cc' object='wbar-Icon.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Icon.o `test -f '$(top_srcdir)/src/core/Icon.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Icon.cc wbar-Icon.obj: $(top_srcdir)/src/core/Icon.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Icon.obj -MD -MP -MF $(DEPDIR)/wbar-Icon.Tpo -c -o wbar-Icon.obj `if test -f '$(top_srcdir)/src/core/Icon.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Icon.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Icon.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Icon.Tpo $(DEPDIR)/wbar-Icon.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Icon.cc' object='wbar-Icon.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Icon.obj `if test -f '$(top_srcdir)/src/core/Icon.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Icon.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Icon.cc'; fi` wbar-Main.o: $(top_srcdir)/src/core/Main.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Main.o -MD -MP -MF $(DEPDIR)/wbar-Main.Tpo -c -o wbar-Main.o `test -f '$(top_srcdir)/src/core/Main.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Main.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Main.Tpo $(DEPDIR)/wbar-Main.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Main.cc' object='wbar-Main.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Main.o `test -f '$(top_srcdir)/src/core/Main.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/Main.cc wbar-Main.obj: $(top_srcdir)/src/core/Main.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Main.obj -MD -MP -MF $(DEPDIR)/wbar-Main.Tpo -c -o wbar-Main.obj `if test -f '$(top_srcdir)/src/core/Main.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Main.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Main.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Main.Tpo $(DEPDIR)/wbar-Main.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/Main.cc' object='wbar-Main.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Main.obj `if test -f '$(top_srcdir)/src/core/Main.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/Main.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/Main.cc'; fi` wbar-SuperBar.o: $(top_srcdir)/src/core/SuperBar.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-SuperBar.o -MD -MP -MF $(DEPDIR)/wbar-SuperBar.Tpo -c -o wbar-SuperBar.o `test -f '$(top_srcdir)/src/core/SuperBar.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/SuperBar.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-SuperBar.Tpo $(DEPDIR)/wbar-SuperBar.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/SuperBar.cc' object='wbar-SuperBar.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-SuperBar.o `test -f '$(top_srcdir)/src/core/SuperBar.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/SuperBar.cc wbar-SuperBar.obj: $(top_srcdir)/src/core/SuperBar.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-SuperBar.obj -MD -MP -MF $(DEPDIR)/wbar-SuperBar.Tpo -c -o wbar-SuperBar.obj `if test -f '$(top_srcdir)/src/core/SuperBar.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/SuperBar.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/SuperBar.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-SuperBar.Tpo $(DEPDIR)/wbar-SuperBar.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/SuperBar.cc' object='wbar-SuperBar.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-SuperBar.obj `if test -f '$(top_srcdir)/src/core/SuperBar.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/SuperBar.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/SuperBar.cc'; fi` wbar-SuperIcon.o: $(top_srcdir)/src/core/SuperIcon.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-SuperIcon.o -MD -MP -MF $(DEPDIR)/wbar-SuperIcon.Tpo -c -o wbar-SuperIcon.o `test -f '$(top_srcdir)/src/core/SuperIcon.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/SuperIcon.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-SuperIcon.Tpo $(DEPDIR)/wbar-SuperIcon.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/SuperIcon.cc' object='wbar-SuperIcon.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-SuperIcon.o `test -f '$(top_srcdir)/src/core/SuperIcon.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/SuperIcon.cc wbar-SuperIcon.obj: $(top_srcdir)/src/core/SuperIcon.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-SuperIcon.obj -MD -MP -MF $(DEPDIR)/wbar-SuperIcon.Tpo -c -o wbar-SuperIcon.obj `if test -f '$(top_srcdir)/src/core/SuperIcon.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/SuperIcon.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/SuperIcon.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-SuperIcon.Tpo $(DEPDIR)/wbar-SuperIcon.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/SuperIcon.cc' object='wbar-SuperIcon.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-SuperIcon.obj `if test -f '$(top_srcdir)/src/core/SuperIcon.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/SuperIcon.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/SuperIcon.cc'; fi` wbar-XWin.o: $(top_srcdir)/src/core/XWin.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-XWin.o -MD -MP -MF $(DEPDIR)/wbar-XWin.Tpo -c -o wbar-XWin.o `test -f '$(top_srcdir)/src/core/XWin.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/XWin.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-XWin.Tpo $(DEPDIR)/wbar-XWin.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/XWin.cc' object='wbar-XWin.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-XWin.o `test -f '$(top_srcdir)/src/core/XWin.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/core/XWin.cc wbar-XWin.obj: $(top_srcdir)/src/core/XWin.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-XWin.obj -MD -MP -MF $(DEPDIR)/wbar-XWin.Tpo -c -o wbar-XWin.obj `if test -f '$(top_srcdir)/src/core/XWin.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/XWin.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/XWin.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-XWin.Tpo $(DEPDIR)/wbar-XWin.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/core/XWin.cc' object='wbar-XWin.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-XWin.obj `if test -f '$(top_srcdir)/src/core/XWin.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/core/XWin.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/core/XWin.cc'; fi` wbar-App.o: $(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-App.o -MD -MP -MF $(DEPDIR)/wbar-App.Tpo -c -o wbar-App.o `test -f '$(top_srcdir)/src/utils/App.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-App.Tpo $(DEPDIR)/wbar-App.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/App.cc' object='wbar-App.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-App.o `test -f '$(top_srcdir)/src/utils/App.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/App.cc wbar-App.obj: $(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-App.obj -MD -MP -MF $(DEPDIR)/wbar-App.Tpo -c -o wbar-App.obj `if test -f '$(top_srcdir)/src/utils/App.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/App.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/App.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-App.Tpo $(DEPDIR)/wbar-App.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/App.cc' object='wbar-App.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-App.obj `if test -f '$(top_srcdir)/src/utils/App.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/App.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/App.cc'; fi` wbar-Config.o: $(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Config.o -MD -MP -MF $(DEPDIR)/wbar-Config.Tpo -c -o wbar-Config.o `test -f '$(top_srcdir)/src/utils/Config.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Config.Tpo $(DEPDIR)/wbar-Config.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Config.cc' object='wbar-Config.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Config.o `test -f '$(top_srcdir)/src/utils/Config.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Config.cc wbar-Config.obj: $(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Config.obj -MD -MP -MF $(DEPDIR)/wbar-Config.Tpo -c -o wbar-Config.obj `if test -f '$(top_srcdir)/src/utils/Config.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Config.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Config.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Config.Tpo $(DEPDIR)/wbar-Config.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Config.cc' object='wbar-Config.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Config.obj `if test -f '$(top_srcdir)/src/utils/Config.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Config.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Config.cc'; fi` wbar-Utils.o: $(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Utils.o -MD -MP -MF $(DEPDIR)/wbar-Utils.Tpo -c -o wbar-Utils.o `test -f '$(top_srcdir)/src/utils/Utils.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Utils.Tpo $(DEPDIR)/wbar-Utils.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Utils.cc' object='wbar-Utils.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Utils.o `test -f '$(top_srcdir)/src/utils/Utils.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Utils.cc wbar-Utils.obj: $(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-Utils.obj -MD -MP -MF $(DEPDIR)/wbar-Utils.Tpo -c -o wbar-Utils.obj `if test -f '$(top_srcdir)/src/utils/Utils.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Utils.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Utils.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-Utils.Tpo $(DEPDIR)/wbar-Utils.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Utils.cc' object='wbar-Utils.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-Utils.obj `if test -f '$(top_srcdir)/src/utils/Utils.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Utils.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Utils.cc'; fi` wbar-OptParser.o: $(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-OptParser.o -MD -MP -MF $(DEPDIR)/wbar-OptParser.Tpo -c -o wbar-OptParser.o `test -f '$(top_srcdir)/src/utils/OptParser.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-OptParser.Tpo $(DEPDIR)/wbar-OptParser.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/OptParser.cc' object='wbar-OptParser.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-OptParser.o `test -f '$(top_srcdir)/src/utils/OptParser.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/OptParser.cc wbar-OptParser.obj: $(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -MT wbar-OptParser.obj -MD -MP -MF $(DEPDIR)/wbar-OptParser.Tpo -c -o wbar-OptParser.obj `if test -f '$(top_srcdir)/src/utils/OptParser.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/OptParser.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/OptParser.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar-OptParser.Tpo $(DEPDIR)/wbar-OptParser.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/OptParser.cc' object='wbar-OptParser.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_CXXFLAGS) $(CXXFLAGS) -c -o wbar-OptParser.obj `if test -f '$(top_srcdir)/src/utils/OptParser.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/OptParser.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/OptParser.cc'; fi` wbar_config-Run.o: $(top_srcdir)/src/config/Run.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Run.o -MD -MP -MF $(DEPDIR)/wbar_config-Run.Tpo -c -o wbar_config-Run.o `test -f '$(top_srcdir)/src/config/Run.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/Run.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Run.Tpo $(DEPDIR)/wbar_config-Run.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/Run.cc' object='wbar_config-Run.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Run.o `test -f '$(top_srcdir)/src/config/Run.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/Run.cc wbar_config-Run.obj: $(top_srcdir)/src/config/Run.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Run.obj -MD -MP -MF $(DEPDIR)/wbar_config-Run.Tpo -c -o wbar_config-Run.obj `if test -f '$(top_srcdir)/src/config/Run.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/Run.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/Run.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Run.Tpo $(DEPDIR)/wbar_config-Run.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/Run.cc' object='wbar_config-Run.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Run.obj `if test -f '$(top_srcdir)/src/config/Run.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/Run.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/Run.cc'; fi` wbar_config-Functions.o: $(top_srcdir)/src/config/Functions.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Functions.o -MD -MP -MF $(DEPDIR)/wbar_config-Functions.Tpo -c -o wbar_config-Functions.o `test -f '$(top_srcdir)/src/config/Functions.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/Functions.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Functions.Tpo $(DEPDIR)/wbar_config-Functions.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/Functions.cc' object='wbar_config-Functions.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Functions.o `test -f '$(top_srcdir)/src/config/Functions.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/Functions.cc wbar_config-Functions.obj: $(top_srcdir)/src/config/Functions.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Functions.obj -MD -MP -MF $(DEPDIR)/wbar_config-Functions.Tpo -c -o wbar_config-Functions.obj `if test -f '$(top_srcdir)/src/config/Functions.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/Functions.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/Functions.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Functions.Tpo $(DEPDIR)/wbar_config-Functions.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/Functions.cc' object='wbar_config-Functions.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Functions.obj `if test -f '$(top_srcdir)/src/config/Functions.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/Functions.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/Functions.cc'; fi` wbar_config-MainConfig.o: $(top_srcdir)/src/config/MainConfig.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-MainConfig.o -MD -MP -MF $(DEPDIR)/wbar_config-MainConfig.Tpo -c -o wbar_config-MainConfig.o `test -f '$(top_srcdir)/src/config/MainConfig.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/MainConfig.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-MainConfig.Tpo $(DEPDIR)/wbar_config-MainConfig.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/MainConfig.cc' object='wbar_config-MainConfig.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-MainConfig.o `test -f '$(top_srcdir)/src/config/MainConfig.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/config/MainConfig.cc wbar_config-MainConfig.obj: $(top_srcdir)/src/config/MainConfig.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-MainConfig.obj -MD -MP -MF $(DEPDIR)/wbar_config-MainConfig.Tpo -c -o wbar_config-MainConfig.obj `if test -f '$(top_srcdir)/src/config/MainConfig.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/MainConfig.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/MainConfig.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-MainConfig.Tpo $(DEPDIR)/wbar_config-MainConfig.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/config/MainConfig.cc' object='wbar_config-MainConfig.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-MainConfig.obj `if test -f '$(top_srcdir)/src/config/MainConfig.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/config/MainConfig.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/config/MainConfig.cc'; fi` wbar_config-App.o: $(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-App.o -MD -MP -MF $(DEPDIR)/wbar_config-App.Tpo -c -o wbar_config-App.o `test -f '$(top_srcdir)/src/utils/App.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-App.Tpo $(DEPDIR)/wbar_config-App.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/App.cc' object='wbar_config-App.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-App.o `test -f '$(top_srcdir)/src/utils/App.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/App.cc wbar_config-App.obj: $(top_srcdir)/src/utils/App.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-App.obj -MD -MP -MF $(DEPDIR)/wbar_config-App.Tpo -c -o wbar_config-App.obj `if test -f '$(top_srcdir)/src/utils/App.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/App.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/App.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-App.Tpo $(DEPDIR)/wbar_config-App.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/App.cc' object='wbar_config-App.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-App.obj `if test -f '$(top_srcdir)/src/utils/App.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/App.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/App.cc'; fi` wbar_config-Config.o: $(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Config.o -MD -MP -MF $(DEPDIR)/wbar_config-Config.Tpo -c -o wbar_config-Config.o `test -f '$(top_srcdir)/src/utils/Config.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Config.Tpo $(DEPDIR)/wbar_config-Config.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Config.cc' object='wbar_config-Config.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Config.o `test -f '$(top_srcdir)/src/utils/Config.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Config.cc wbar_config-Config.obj: $(top_srcdir)/src/utils/Config.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Config.obj -MD -MP -MF $(DEPDIR)/wbar_config-Config.Tpo -c -o wbar_config-Config.obj `if test -f '$(top_srcdir)/src/utils/Config.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Config.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Config.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Config.Tpo $(DEPDIR)/wbar_config-Config.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Config.cc' object='wbar_config-Config.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Config.obj `if test -f '$(top_srcdir)/src/utils/Config.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Config.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Config.cc'; fi` wbar_config-Utils.o: $(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Utils.o -MD -MP -MF $(DEPDIR)/wbar_config-Utils.Tpo -c -o wbar_config-Utils.o `test -f '$(top_srcdir)/src/utils/Utils.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Utils.Tpo $(DEPDIR)/wbar_config-Utils.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Utils.cc' object='wbar_config-Utils.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Utils.o `test -f '$(top_srcdir)/src/utils/Utils.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/Utils.cc wbar_config-Utils.obj: $(top_srcdir)/src/utils/Utils.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-Utils.obj -MD -MP -MF $(DEPDIR)/wbar_config-Utils.Tpo -c -o wbar_config-Utils.obj `if test -f '$(top_srcdir)/src/utils/Utils.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Utils.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Utils.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-Utils.Tpo $(DEPDIR)/wbar_config-Utils.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/Utils.cc' object='wbar_config-Utils.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-Utils.obj `if test -f '$(top_srcdir)/src/utils/Utils.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/Utils.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/Utils.cc'; fi` wbar_config-OptParser.o: $(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-OptParser.o -MD -MP -MF $(DEPDIR)/wbar_config-OptParser.Tpo -c -o wbar_config-OptParser.o `test -f '$(top_srcdir)/src/utils/OptParser.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-OptParser.Tpo $(DEPDIR)/wbar_config-OptParser.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/OptParser.cc' object='wbar_config-OptParser.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-OptParser.o `test -f '$(top_srcdir)/src/utils/OptParser.cc' || echo '$(srcdir)/'`$(top_srcdir)/src/utils/OptParser.cc wbar_config-OptParser.obj: $(top_srcdir)/src/utils/OptParser.cc @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -MT wbar_config-OptParser.obj -MD -MP -MF $(DEPDIR)/wbar_config-OptParser.Tpo -c -o wbar_config-OptParser.obj `if test -f '$(top_srcdir)/src/utils/OptParser.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/OptParser.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/OptParser.cc'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/wbar_config-OptParser.Tpo $(DEPDIR)/wbar_config-OptParser.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$(top_srcdir)/src/utils/OptParser.cc' object='wbar_config-OptParser.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wbar_config_CXXFLAGS) $(CXXFLAGS) -c -o wbar_config-OptParser.obj `if test -f '$(top_srcdir)/src/utils/OptParser.cc'; then $(CYGPATH_W) '$(top_srcdir)/src/utils/OptParser.cc'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/src/utils/OptParser.cc'; fi` ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-binPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/doc/0000755000175000017500000000000012027635465013264 5ustar00sotosoto00000000000000wbar-2.3.4/doc/Makefile.am0000644000175000017500000000004011667227673015321 0ustar00sotosoto00000000000000SUBDIRS = man CLEANFILES = *~ wbar-2.3.4/doc/man/0000755000175000017500000000000012027635465014037 5ustar00sotosoto00000000000000wbar-2.3.4/doc/man/wbar-config.10000644000175000017500000000311512025755742016316 0ustar00sotosoto00000000000000.\" Hey, EMACS: -*- nroff -*- .TH WBAR-CONFIG 1 "January 14, 2012" .SH NAME wbar-config \- GUI to customize wbar .SH SYNOPSIS .B wbar-config .SH DESCRIPTION \fBwbar-config\fP is a program that creates and configures the settings for .BR wbar (1)\&. The config file consists of blocks of three lines each of the following format: .PP i: /path/to/file.png .br c: command \-\-args .br t: description for mouseover .PP That means that there is one line starting with "i: " followed by the path to a png file which is used as the icon; followed by a line starting with "c: " which contains the command and arguments that should be run when the user clicks on this icon; and finally followed by a line starting with "t: " containing the text that shall be shown to the user when the mouse cursor is over the icon. .PP The first block is different, it describes general settings. Here the "i: " argument is the path to a file which is used as the background image. The "c: " argument defines the default settings for wbar. The "t: " line contains the path to the font that shall be used followed by a slash and the font size. .PP For example: .PP i: /usr/share/pixmaps/wbar/osxbarback.png .br c: wbar \-\-bpress \-\-above-desk \-\-vbar \-\-pos right \-\-isize 32 \-\-idist 5 \-\-nanim 4 \-\-falfa 65 .br t: /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans/10 .SH SEE ALSO .BR wbar (1) .SH AUTHORS wbar-config was written by Yadickson Soto . .PP This manual page was written by Yadickson Soto and improved by Thomas Klausner . wbar-2.3.4/doc/man/Makefile.am0000644000175000017500000000017311667227673016103 0ustar00sotosoto00000000000000CLEANFILES = *~ SUBDIRS = es EXTRA_DIST = $(man_MANS) man_MANS = wbar.1 if WBAR_CONFIG man_MANS += wbar-config.1 endif wbar-2.3.4/doc/man/es/0000755000175000017500000000000012027635465014446 5ustar00sotosoto00000000000000wbar-2.3.4/doc/man/es/wbar-config.10000644000175000017500000000277611667227673016751 0ustar00sotosoto00000000000000.\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .\"******************************************************************* .\" .\" This file was generated with po4a. Translate the source file. .\" .\"******************************************************************* .TH WBAR\-CONFIG 1 "Diciembre 30, 2010" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NOMBRE wbar\-config \- Interfáz gráfica de configuración para wbar .br .SH DESCRIPCIÓN Esta applicación no tiene parámetros de ejecución, inicia desde el panel de GNOME. .br .PP .\" TeX users may be more comfortable with the \fB\fP and .\" \fI\fP escape sequences to invode bold face and italics, .\" respectively. \fBwbar\-config\fP \- es un programa que permite la configuración de wbar. .SH "VER TAMBIÉN" \fBwbar\fP(1) .br .SH AUTOR wbar\-config fue escrita por Yadickson Soto . .PP Esta página de manual fue escrita por Yadickson Soto . wbar-2.3.4/doc/man/es/Makefile.am0000644000175000017500000000020411667227673016505 0ustar00sotosoto00000000000000CLEANFILES = *~ EXTRA_DIST = $(man_MANS) mandir = @mandir@/es man_MANS = wbar.1 if WBAR_CONFIG man_MANS += wbar-config.1 endif wbar-2.3.4/doc/man/es/wbar.10000644000175000017500000000474211725512514015463 0ustar00sotosoto00000000000000.\" Hey, EMACS: -*- nroff -*- .\"******************************************************************* .\" .\" This file was generated with po4a. Translate the source file. .\" .\"******************************************************************* .TH WBAR 1 "Diciembre 30, 2010" .SH NOMBRE wbar \- Una ligera y rápida barra de inicio. .SH SYNOPSIS \fBwbar\fP [\fIopciones\fP] .SH DESCRIPCIÓN Esta página de manual documenta brevemente los comandos de \fBwbar\fP. .PP \fBwbar\fP es una barra de inicio rápido. Es ligera y atractiva a la vista. .SH OPCIONES Mostrar resumen de las opciones incluidas. .TP \fB\-\-help\fP Mostrar resumen de las opciones. .TP \fB\-\-version\fP Mostrar versión del programa. .TP \fB\-\-config \fP Ruta de archivo de configuración (ejemplo: $HOME/.wbar). .TP \fB\-\-above\-desk\fP Ejecutar sobre el escritorio (ejemplo: xfdesktop). .TP .B \-\-taskbar Habilitar barra de tarea. .TP \fB\-\-noreload\fP No forzar la recarga con un click derecho. .TP \fB\-\-offset \fP Desplazamiento de la barra (ejemplo: 20). .TP \fB\-\-isize \fP Tamaño de icono (ejemplo: 32). .TP \fB\-\-idist \fP Distancia de icono (ejemplo: 1). .TP \fB\-\-zoomf \fP Factor de zoom (ejemplo: 1.8 o 2.5). .TP \fB\-\-jumpf \fP Factor de salto (ejemplo: 1.0 o 0.0). .TP \fB\-\-pos \fP Posición en pantalla. Elegir entre top, bottom, left, right, center, \-. .TP \fB\-\-grow \fP Invertir crecimineto de iconos. .TP \fB\-\-dblclk \fP Tiempo de doble click ms (0: click simple). .TP \fB\-\-bpress\fP Icono se presiona. .TP \fB\-\-vbar\fP Mostrar barra vertical. .TP \fB\-\-balfa \fP Alfa de la barra (0\-100). .TP .B \-\-rsize Reflection size in percents (0-100). .TP \fB\-\-falfa \fP Alfa de desenfoque de la barra (0\-100). .TP \fB\-\-filter \fP Modo de filtro de color (0: ninguno, 1: inmóvil, 2: otros, 3: todos). .TP \fB\-\-fc \fP Filtro de color (verde por defecto 0xff00c800). .TP \fB\-\-nanim \fP Establecer el número de iconos animados: 1, 3, 5, 7, 9, ... .TP \fB\-\-nofont\fP Deshabilitar texto. .SH AUTOR wbar fue escrito por: .TP \- Krzysztof Burghardt .PP \- Yadickson Soto .PP Esta página de manual fue escrita para el proyecto Debian (y para ser utilizado por otros) por: .TP \- Krzysztof Burghardt .PP \- Yadickson Soto .PP wbar-2.3.4/doc/man/es/Makefile.in0000644000175000017500000003247212027635264016520 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : @WBAR_CONFIG_TRUE@am__append_1 = wbar-config.1 subdir = doc/man/es DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@/es mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ EXTRA_DIST = $(man_MANS) man_MANS = wbar.1 $(am__append_1) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/es/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/man/es/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ uninstall-am uninstall-man uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/doc/man/wbar.10000644000175000017500000000407412025755742015060 0ustar00sotosoto00000000000000.\" Hey, EMACS: -*- nroff -*- .TH WBAR 1 "January 14, 2012" .SH NAME wbar \- a light and fast launch bar .SH SYNOPSIS .B wbar .RI [ options ] .SH DESCRIPTION This manual page documents briefly the .B wbar command. .PP \fBwbar\fP is a quick launch bar. It's fast, light and cool eye-candy. .PP The config file format is described in .BR wbar-config (1)\. .SH OPTIONS A summary of the options is included below. .TP .B \-\-help Show summary of options. .TP .B \-\-version Show version of program. .TP \fB\-\-config \fP Config file path (ie: $HOME/.wbar). .TP .B \-\-above-desk Run above a desktop app (ie: xfdesktop). .TP .B \-\-taskbar Enable taskbar. .TP .B \-\-noreload Right click does not force reload anymore. .TP .B \-\-offset Offset bar (eg: 20). .TP .B \-\-isize Set icon size (eg: 32). .TP .B \-\-idist Set icon dist (eg: 1). .TP .B \-\-zoomf Set zoom factor (eg: 1.8 or 2.5). .TP .B \-\-jumpf Set jump factor (eg: 1.0 or 0.0). .TP .B \-\-pos Set position. Choose from top, bottom, left, right, center, -. .TP .B \-\-grow Inverting icons growth. .TP .B \-\-dblclk Set time in ms for double click (0: single click). .TP .B \-\-bpress Icon gets pressed. .TP .B \-\-vbar Show vertical bar. .TP .B \-\-balfa Set bar alfa (0-100). .TP .B \-\-rsize Reflection size in percents (0-100). .TP .B \-\-falfa Set unfocused bar alfa (0-100). .TP .B \-\-filter Set color filter (0: none, 1: hovered, 2: others, 3: all). .TP .B \-\-fc Set filter color (default green 0xff00c800). .TP .B -\-nanim Set number of animated icons: 1, 3, 5, 7, 9, ... .TP .B \-\-nofont If set disables font rendering. .SH SEE ALSO .BR wbar-config (1) .SH AUTHORS wbar was written by: .TP \- Rodolfo Granata .PP \- Yadickson Soto .PP This manual page was written for the Debian project (and may be used by others) by: .TP \- Krzysztof Burghardt .PP \- Yadickson Soto .PP wbar-2.3.4/doc/man/Makefile.in0000644000175000017500000005061112027635264016104 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : @WBAR_CONFIG_TRUE@am__append_1 = wbar-config.1 subdir = doc/man DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ SUBDIRS = es EXTRA_DIST = $(man_MANS) man_MANS = wbar.1 $(am__append_1) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/man/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(MANS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-man install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-man1 install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic ctags \ ctags-recursive distclean distclean-generic distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-man uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/doc/Makefile.in0000644000175000017500000004150312027635264015331 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = man CLEANFILES = *~ all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic ctags \ ctags-recursive distclean distclean-generic distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ tags-recursive uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/etc/0000755000175000017500000000000012027635465013272 5ustar00sotosoto00000000000000wbar-2.3.4/etc/wbar.cfg.in0000644000175000017500000000022312025755742015307 0ustar00sotosoto00000000000000i: @PIXMAPDIR@/@PACKAGE_NAME@/dock.png c: @PACKAGE_NAME@ @DEFAULT_ARGV@ t: none i: @PIXMAPDIR@/@PACKAGE_NAME@/wbar.png c: wbar-config t: Config wbar-2.3.4/etc/wbar.desktop.in0000644000175000017500000000055512027635270016224 0ustar00sotosoto00000000000000[Desktop Entry] _Name=Warlock Bar Type=Application Exec=/usr/bin/wbar Terminal=false Icon=/usr/share/pixmaps/wbar/wbar.png _Comment=A light and fast launch bar. Categories=Utility; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=wbar X-GNOME-Bugzilla-Component=general X-GNOME-Autostart-enabled=true X-GNOME-Autostart-Delay=30 X-Ubuntu-Gettext-Domain=wbar wbar-2.3.4/etc/wbar.desktop.in.in0000644000175000017500000000063012025755742016630 0ustar00sotosoto00000000000000[Desktop Entry] _Name=Warlock Bar Type=Application Exec=@BINDIR@/@PACKAGE_NAME@ Terminal=false Icon=@PIXMAPDIR@/@PACKAGE_NAME@/@PACKAGE_NAME@.png _Comment=A light and fast launch bar. Categories=Utility; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=@PACKAGE_NAME@ X-GNOME-Bugzilla-Component=general X-GNOME-Autostart-enabled=true X-GNOME-Autostart-Delay=30 X-Ubuntu-Gettext-Domain=@PACKAGE_NAME@ wbar-2.3.4/etc/wbar0000644000175000017500000000576512025763137014161 0ustar00sotosoto00000000000000# bash completion for wbar # Yadickson Soto yadickson@gmail.com have wbar && _wbar() { local cur prev split=false COMPREPLY=() cur=`_get_cword` prev=${COMP_WORDS[COMP_CWORD-1]} _split_longopt && split=true case $prev in --config) _filedir return 0 ;; --offset) COMPREPLY=( $( compgen -W '20' -- "$cur" ) ) return 0 ;; --isize) COMPREPLY=( $( compgen -W '32' -- "$cur" ) ) return 0 ;; --idist) COMPREPLY=( $( compgen -W '1' -- "$cur" ) ) return 0 ;; --zoomf) COMPREPLY=( $( compgen -W '1.8' -- "$cur" ) ) return 0 ;; --jumpf) COMPREPLY=( $( compgen -W '1.0' -- "$cur" ) ) return 0 ;; --pos) COMPREPLY=( $( compgen -W 'top bottom left right center bot-rigth bot-left top-right top-left' -- "$cur" ) ) return 0 ;; --dblclk) COMPREPLY=( $( compgen -W '200' -- "$cur" ) ) return 0 ;; --balfa) COMPREPLY=( $( compgen -W '1' -- "$cur" ) ) return 0 ;; --rsize) COMPREPLY=( $( compgen -W '10' -- "$cur" ) ) return 0 ;; --falfa) COMPREPLY=( $( compgen -W '1' -- "$cur" ) ) return 0 ;; --filter) COMPREPLY=( $( compgen -W '0 1 2 3' -- "$cur" ) ) return 0 ;; --fc) COMPREPLY=( $( compgen -W '0xff00c800' -- "$cur" ) ) return 0 ;; --nanim) COMPREPLY=( $( compgen -W '5' -- "$cur" ) ) return 0 ;; --above-desk|--taskbar|--noreload|--grow|--bpress|--vbar|--nofont|-h|-v|--help|--version) # all other arguments are noop with these return 0 ;; esac $split && return 0 if [[ "$cur" == * ]]; then # return list of available options COMPREPLY=( $( compgen -W '--help \ --version \ --config \ --bpress \ --above-desk \ --vbar \ --nofont \ --pos \ --grow \ --isize \ --idist \ --nanim \ --zoomf \ --jumpf \ --dblclk \ --balfa \ --falfa \ --filter \ --fc \ --offset \ --noreload \ --taskbar \ --rsize \ ' \ -- "$cur") ) fi } && complete -F _wbar wbar # Local variables: # mode: shell-script # sh-basic-offset: 4 # sh-indent-comment: t # indent-tabs-mode: nil # End: # ex: ts=4 sw=4 et filetype=sh wbar-2.3.4/etc/Makefile.am0000644000175000017500000000074612025764276015336 0ustar00sotosoto00000000000000CLEANFILES = *~ $(wbardesktop:.desktop.in.in=.desktop) defaultdir = @DEFAULT_CONFIGDIR@ default_DATA = $(wbarcfg:.cfg.in=.cfg) autostartdir = @DEFAULT_CONFIGDIR@ autostart_DATA = $(wbardesktop:.desktop.in.in=.desktop) bashcompletiondir = /etc/bash_completion.d bashcompletion_DATA = wbar @INTLTOOL_DESKTOP_RULE@ wbardesktop = wbar.desktop.in.in wbarcfg = wbar.cfg.in EXTRA_DIST = \ $(wbardesktop) \ $(wbarcfg) \ $(wbardesktop:.desktop.in.in=.desktop.in) \ $(bashcompletion_DATA) wbar-2.3.4/etc/Makefile.in0000644000175000017500000003500712027635264015341 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = etc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/wbar.cfg.in $(srcdir)/wbar.desktop.in.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = wbar.cfg wbar.desktop.in CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(autostartdir)" \ "$(DESTDIR)$(bashcompletiondir)" "$(DESTDIR)$(defaultdir)" DATA = $(autostart_DATA) $(bashcompletion_DATA) $(default_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ $(wbardesktop:.desktop.in.in=.desktop) defaultdir = @DEFAULT_CONFIGDIR@ default_DATA = $(wbarcfg:.cfg.in=.cfg) autostartdir = @DEFAULT_CONFIGDIR@ autostart_DATA = $(wbardesktop:.desktop.in.in=.desktop) bashcompletiondir = /etc/bash_completion.d bashcompletion_DATA = wbar wbardesktop = wbar.desktop.in.in wbarcfg = wbar.cfg.in EXTRA_DIST = \ $(wbardesktop) \ $(wbarcfg) \ $(wbardesktop:.desktop.in.in=.desktop.in) \ $(bashcompletion_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign etc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): wbar.cfg: $(top_builddir)/config.status $(srcdir)/wbar.cfg.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ wbar.desktop.in: $(top_builddir)/config.status $(srcdir)/wbar.desktop.in.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-autostartDATA: $(autostart_DATA) @$(NORMAL_INSTALL) test -z "$(autostartdir)" || $(MKDIR_P) "$(DESTDIR)$(autostartdir)" @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \ done uninstall-autostartDATA: @$(NORMAL_UNINSTALL) @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(autostartdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(autostartdir)" && rm -f $$files install-bashcompletionDATA: $(bashcompletion_DATA) @$(NORMAL_INSTALL) test -z "$(bashcompletiondir)" || $(MKDIR_P) "$(DESTDIR)$(bashcompletiondir)" @list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bashcompletiondir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(bashcompletiondir)" || exit $$?; \ done uninstall-bashcompletionDATA: @$(NORMAL_UNINSTALL) @list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(bashcompletiondir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bashcompletiondir)" && rm -f $$files install-defaultDATA: $(default_DATA) @$(NORMAL_INSTALL) test -z "$(defaultdir)" || $(MKDIR_P) "$(DESTDIR)$(defaultdir)" @list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(defaultdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(defaultdir)" || exit $$?; \ done uninstall-defaultDATA: @$(NORMAL_UNINSTALL) @list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(defaultdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(defaultdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(autostartdir)" "$(DESTDIR)$(bashcompletiondir)" "$(DESTDIR)$(defaultdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-autostartDATA install-bashcompletionDATA \ install-defaultDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-autostartDATA uninstall-bashcompletionDATA \ uninstall-defaultDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-autostartDATA \ install-bashcompletionDATA install-data install-data-am \ install-defaultDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-autostartDATA \ uninstall-bashcompletionDATA uninstall-defaultDATA @INTLTOOL_DESKTOP_RULE@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/autogen.sh0000755000175000017500000001100411667227674014524 0ustar00sotosoto00000000000000#!/bin/sh # Run this to generate all the initial makefiles, etc. srcdir=`dirname $0` test -z "$srcdir" && srcdir=. DIE=0 if [ -n "$GNOME2_DIR" ]; then ACLOCAL_FLAGS="-I $GNOME2_DIR/share/aclocal $ACLOCAL_FLAGS" LD_LIBRARY_PATH="$GNOME2_DIR/lib:$LD_LIBRARY_PATH" PATH="$GNOME2_DIR/bin:$PATH" export PATH export LD_LIBRARY_PATH fi (test -f $srcdir/configure.ac) || { echo -n "**Error**: Directory "\`$srcdir\'" does not look like the" echo " top-level package directory" exit 1 } mkdir -p m4 autoreconf --install autoreconf --force (autoconf --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`autoconf' installed." echo "Download the appropriate package for your distribution," echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" DIE=1 } (grep "_PROG_INTLTOOL" $srcdir/configure.ac >/dev/null) && { (intltoolize --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`intltool' installed." echo "You can get it from:" echo " ftp://ftp.gnome.org/pub/GNOME/" DIE=1 } } (grep "^AM_PROG_XML_I18N_TOOLS" $srcdir/configure.ac >/dev/null) && { (xml-i18n-toolize --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`xml-i18n-toolize' installed." echo "You can get it from:" echo " ftp://ftp.gnome.org/pub/GNOME/" DIE=1 } } (grep "_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) && { (libtool --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`libtool' installed." echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/" DIE=1 } } (grep "^AM_GLIB_GNU_GETTEXT" $srcdir/configure.ac >/dev/null) && { (grep "sed.*POTFILES" $srcdir/configure.ac) > /dev/null || \ (glib-gettextize --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`glib' installed." echo "You can get it from: ftp://ftp.gtk.org/pub/gtk" DIE=1 } } (automake --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: You must have \`automake' installed." echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/" DIE=1 NO_AUTOMAKE=yes } # if no automake, don't bother testing for aclocal test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || { echo echo "**Error**: Missing \`aclocal'. The version of \`automake'" echo "installed doesn't appear recent enough." echo "You can get automake from ftp://ftp.gnu.org/pub/gnu/" DIE=1 } if test "$DIE" -eq 1; then exit 1 fi if test -z "$*"; then echo "**Warning**: I am going to run \`configure' with no arguments." echo "If you wish to pass any to it, please specify them on the" echo \`$0\'" command line." echo fi case $CC in xlc ) am_opt=--include-deps;; esac for coin in `find $srcdir -path $srcdir/CVS -prune -o -name configure.ac -print` do dr=`dirname $coin` if test -f $dr/NO-AUTO-GEN; then echo skipping $dr -- flagged as no auto-gen else echo processing $dr ( cd $dr aclocalinclude="$ACLOCAL_FLAGS" if grep "^AM_GLIB_GNU_GETTEXT" configure.ac >/dev/null; then echo "Creating $dr/aclocal.m4 ..." test -r $dr/aclocal.m4 || touch $dr/aclocal.m4 echo "Running glib-gettextize... Ignore non-fatal messages." echo "no" | glib-gettextize --force --copy echo "Making $dr/aclocal.m4 writable ..." test -r $dr/aclocal.m4 && chmod u+w $dr/aclocal.m4 fi if grep "_PROG_INTLTOOL" configure.ac >/dev/null; then echo "Running intltoolize..." intltoolize --copy --force --automake fi if grep "^AM_PROG_XML_I18N_TOOLS" configure.ac >/dev/null; then echo "Running xml-i18n-toolize..." xml-i18n-toolize --copy --force --automake fi if grep "_PROG_LIBTOOL" configure.ac >/dev/null; then if test -z "$NO_LIBTOOLIZE" ; then echo "Running libtoolize..." libtoolize --force --copy fi fi echo "Running aclocal $aclocalinclude ..." aclocal $aclocalinclude if grep "^A[CM]_CONFIG_HEADER" configure.ac >/dev/null; then echo "Running autoheader..." autoheader fi echo "Running automake --gnu $am_opt ..." automake --add-missing --gnu -c --foreign $am_opt echo "Running autoconf ..." autoconf ) fi done conf_flags="--prefix /usr --exec_prefix /usr --sysconfdir=/etc --enable-maintainer-mode" if test x$NOCONFIGURE = x; then echo Running $srcdir/configure $conf_flags "$@" ... $srcdir/configure $conf_flags "$@" \ && echo Now type \`make\' to compile. || exit 1 else echo Skipping configure process. fi wbar-2.3.4/pixmaps/0000755000175000017500000000000012027635465014200 5ustar00sotosoto00000000000000wbar-2.3.4/pixmaps/wbar.png0000644000175000017500000001506712025755741015650 0ustar00sotosoto00000000000000‰PNG  IHDR€€Ã>aËsRGB®ÎébKGDÿÿÿ ½§“ pHYs × ×B(›xtIMEÚ 7ØfÜT·IDATxÚí]kŒ]WuþÖ9÷1wîÜyx`>áwmJÊ To!Èú\ S?8 [¬Ï´yŠ 7A ‚ Häì·„©œ $(@ A‚ $(@ A‚¹¤†À–'Ÿ|òO|\DîO’dK$ºˆHDDJ¥Ò*€ÿ‹ãøŸ{ì±ï äÞ¸ÇÓê>· ½ZpÀ£î_úÒ—>366öþÛn»mÿ¶mÛ¦£(Šˆl3·çççÏž={öÈâââ×?ÿùÏ#X€ÉO<1S­V?²sçÎC{öì©LMMµâ8nm¥6¶Z-ªV«;›Íæx³Ù\üâ¿øôç>÷¹å ƒYe˜œœœÙ·o_¹Ñh$ËËË-alÌ¡¨6Æ333©¬­­Í-,,¼À·ƒ FþdïÞ½ÓCCCÒn·Û"Â"‚›mþUÛ²—Ün·[cccå]»vÝqþüù÷Ô¹ojjªNDÍf³™¨‰'cðoª¨6Êúúz»V«Å“I’ÜÂÀI»ÝŠã8…Ûjò·¢¡bf‘DQ3s5(Àà$Ž¢H#î-î® ¢“MïÁ¼).`hh(~÷»ß=sÏ=÷L”ËåRBfÆ•+WÖžyæ™ùcÇŽ-rp·ˆÙMä¦(Àþýû'}ôÑ=ûöí«•J7ÖÁµk׸V«ÅƒT€ †e8|øpåøñãq’$7¬5Fƒ<ØÚ³gOòºP€ƒŽÏÍÍUE„[­µGFFðÀŒß¬ÕóË_þ²üµ¯}­6??oÆm”ËeYXXˆ?ýéO¯¼.`ûöíµR©´igËÌØ¶m[ùf)ÀÑ£GË ±ªÝ¥çŸþ¦ôã¦(QEH’dÓþöfÆi.\ˆ———oJ?B°9 4°I»Y‘GP€×¹ $(@ A^ŸÒ5 |üñÇ£“‡þ¬-øTLt Wiþëï¿€4]Ý? N¢ X€„eS)" 0»ïàûûFîI‚ÚØúÄ_?bþ½Õ|ë­ÜâÑõõþÈ)‰b Ì‘ˆÅXZoÍô-D•Z c=:ôɧ¾ã†, k <CþñŽË‡ÿõñÇç +À'ŸúÖÜ *ÿ箩m»vNMÕk(—cDÙŒáÈWÇ "þxžŠ¿²CÕ2¢ˆ&_6E Š#Lmz*HÚmLLOã£~ÈzïåïžB¹ƒâýtV*ň£ÁD‚Qa¨Ré>ùJ*åâ(ÂØH|ðmiµˆHö~Ôl'ãW—Vß{~áâ;ND‡¾ðñ¿ûξòØGŽ÷­<õÍÝ%*ýìÍwß1úý_ÏGgd“S%”ÊéŠÍBV°ØbKD̓y@’ ¶XÀ°H:q7:ÿJ¡¯'ß/,ví•&ž=y’]!„ÉDˆ€A3é/&O8}þ`x Ù "hqª¢+‰àgךª³ÙÚIW/_ÇÕKÉðÜuûÝÇ^yõ§<õÍÿüÙžîKb)ýûí·ß>úìË—£7½u H—«¨ßÓ‰ÕóGö¢7W6©oÔÃBlÂtU’µD R¶L}8ûNhÚ ©»~î'F‰R”.#ÒÚ^‰K˜žÀôìž;v&Ú¿wÏø±W^ùÒ#ýºƒÀÿí7><6Ò¸óÇ/.DsoÙf3#II’þdæô+át¥KªÁ}™½ÐêÙØ—€%ﳨ¦ˆn’ôù5HqïÙéy™¡˜QsÄÂ`0C÷kïݳøÙñ«ñØÈè]>ñÍö´ âÏ6Æ&ÕôQ¦2kAúgVA$½BLƒK¦¾úM3ó&']M³nWïêôÌäœ8Cݯbþ. ೉¥~H:ñ¶yp:BÀÄÎqÔ‘4./.~Àw»»€¤ý¶Ñú0ÆëIlš|Ýÿô•ä:!)ö¤C/–VVSÿO´)<Ž#,¯¬:ë¶û€e aNÇJ»&é/˜y-({éó=IWz±ÑºIic´¬^ ?ÐÓ¸AQ„”’aIáã|àD›×dÄzÂK¯žÂ™³çpÇÞÛEQ¡¿äó{žŸ«««8zìý|²Z‹»w” -'’*-“£¼0m^WªV7­ÄyDQêK»ÄùÎì8¥Ñdôƒ¢-&'£=@X¢ôÆœÎ,H$^ñ †@$Å”¯#Ç—J¡ /8…§ÿ÷û¸ïÍoÀVó/á‡?~N;E߳ij¤„‰2ä^±¹Üµ{7~ñóÃØLQK&SÓÓôÊ$¬a¦¿Ø ©¹í¨ÁäÄ]ýâDÇ’CQ‘ŽØ÷·ÕëM<ýÃáéþÈ‹Ü{uC¾kzb"H" Š‹W²ÈÐߣÂÉW_ÅK/¾€vrãÕ\ccãxð]õ¯{”.£¡¢/÷´’NsfZ¦‰KzeÖ)=sQ$)ú^ J6ð»ÜÀýºÅŒ„ ':ôwa™/|W?wì˜ÁŸÿå_½6¾ßo çÎ7€T\ޱ1·=-@¢Â¼”_P¾R(7—jå1ârœ¬ÚÊÕËPè; Þøç‰"Ä•¡dJ·ÞJ"Æ«$³Ä ΑWª ¢ð©p½/ h%†o1Cލ#TGFÑZ_…çt°Pô*]hñ¾á„Ækñ;aFT*£Ro IM£ÆÌ·†¸É ;EC”nq“»sU©ø?ãuÕdÔÆ§°rù¤Í–fn¾kÝ®¹‡‘@\®`xbJ›N¬Šâ4Rj{3D@§kºý}¾—€ŒÒ\»ù“2Ôy‚>]@ sðgc £!D½ÿœ´Aq)OÊd(´`O –ÓõBô7XiAÂmÔÊ÷à_¾þœ>3Š·¼ñ êµ2–VVRš¹“{M+êIGÜz W¯\Åñs°T™H]µ ,ÄÓÊ0õ‡ ì€ ê+e¨afÿ; ̸tâ7h­­B8éîþº½v•—zýêó E"/&Œâj혘Û;ïyîÚ Á²sIJ‚Ý{Ë8þ ÆGwa玶ÈÁŒm,/-ãô™³8wuK¥9LÒÅo 1ÐÈ´$'ÄÖ¦‚D›™Ãò…s¸¾²„Re(!ûˆ¥Ç<^kf2÷‰ÖUYˆj*iTB}rf÷\Çýo:ïý®·N)Ï)h%ñà[ß„oë×øíË Š±gv¥xëüTA«Õ‰“§ñÂɳ¸Ô¬au¸¦ Œ|@Æ:¸õkr&P[„HÊxü@atv¥jíæº2äøfÒÙ)§X¯ý–Òšd\#^ó`)=¤™s∕ÚîÜóo8pçÛ!²Œ¶\Õè¿\ADu¼áÞ~qô8òB§Ž¿ ðÖúß’•0pº=†+å±ÔM»`1{í YaL ¸ñ¥›Ò1'!Õ¯áÉY OÎÚë˜ NÀˆ 4“hø61/Ø<=‘ð Ä9ÖCL‹‘ëÏöÆ“Ø9ùGh%ÁÒÖwc´Ñl_Âí·íÄácÿƒ¯¼•ö:¸Ý _󥸺„‹D ¸Œõò®•GÐBHX¯ ZŸÑy’¨Ï00ϳ.â Åĉ:¤C”ë¦Y³4 ¹;»ëäQ´¢BŠ ’tšZœ¡Í´å*•a¬·VST,¢]][ÖP+ ƒ*§q¾ºCÁ2E c”EH …V r…—<5§þ.ÚBQÁω§¦Žl—]§™Ì<-¦&ˆ‘!Rað\@Zýã.3‹9³Þâ_/Ö7@ª¨é×Ë^¥àD³ú™Š…$Ó°pê’rŽI‹Tˆ5³—¦¯ÅH —$Mb0Ú`Ì (BÂ-Êåþòc®ZìaGóîe–âš]ŸB[É;éJ~‰õ,²1”[ b,Žec<@žgî¯w%Ì¥£)ÌW¿»ö}&Ðñ÷.Ë«;ÖøTM1y©Â„mÚ‰ÅåÔëu°\DA%`$¨b ×V/¡%ÓiªX+|f§ÄZâ¦Z…”Ì,Pnß2<äM¬z s<ȶ¸zxH)¥º·öÌ ¶œ¿n‰ôͰeò¼á‡É¸Î.±âP7C嘨<ñ¤”D²=÷¢L­¦Âàã>*PXi‹æWþ¿:þ¼ëÀGðÖù@ªñÔÊÓxîØ`aåP1•µÉÚ)9)Áeª ©æT³ù‘ÜŒ›¬žZÖ.‹,ïkZƒÀ&Ÿå°75 Ò?,$fõ&uz7Ì,óEû³¤jºÅtb ¸ÌßJ6ú"¶¿ƒ‡¤{Æ—(Ð9¿üV;óܹëÆuTJé $I ç.žÆKçÖpaåmDRסܒtàèɱ„l«¿¥æØ;ÀDé–÷;(É"üV?ˆ}g¶%­¤ÿl`ŠÄòuç/IO"[¶ƒü™=ïk±"Iò°TŽÛ J‡Ûu+ä|ž ©…0«,…Œ¾‰ç&y¥VNõáN¾r—’ߢ6=‚b~ÅÖ{èa+1ã q‰ÍUm›NOk(Ši` ²É, UÇ\¹lÔw­óvœ¿ö\oÊÑ<‚ÏàÒÚÛÑâmù䙮Ͱ¥©[p'[­á¬†R,I(„µÙš'Óh{°ufAs{@‚c‹r0ÒÒÉy\|åD?ÀŒ®Z@Î 3 eHTÄ#Fj¶h6سƺ•ûˆí]5ìwò™žÅ¡DÀz2…s­ÛXT[6ñ´Lr ÎbS!¦‰Ï&‘|ô‡XèM¿Yt+]º…:fcŠÒS¢¢Õ¾$a¯'/ù<¸¨Xæki™ PЩ!èDx‰Ih¦Â"áD¹Y‘†¶n†ëƒb†d\@ë\:ÙMb˜¼„t-ã(Úb M¡2 ¢U,«_‹sA¶»±ª´ ed1Ø@ûO[¹žxûPê”xH™À^ôe'X ù7—`äȪ*ÎqÜ ó/ƪϑ²J![õäg%)Ç4é3lË’M<nƒ½FÜ,˜% ›Ã9V'Ê#áFÂǾ—o›»€É¡Š:Õ6ø-€Ê¸¬“ ¥èLH~þË-kòæ¯Mšƨ• ]®å²n] MÜÄ€W»åïö0ï­ù íÙ²©®‹ƒ‰É¿€°‘½Ì®AÖ?G•ÄP;C‰ÅòxbM˜ñ„H «œÉjÍ„ÄCëæT¯ ˜°*r47møz2Ü„“£];÷4ÁbM<åbsn)Užm4ªe >ÕèÙªê[ˆeÆõ #Ûbq¸šd•à¥CÀ'ˆAe›CÉFÂŒôysã‰%($â-èè²Bƒ¼@Ò^ªR0tÔc%öØ¿§m¾ØÀGæ¶µÁÒ%Øfa`E=Ù=Sô²8á˵ÏaŒfýDo¢Í-Œ b²M¾CêÃtNbØ%rÐK¾8r¶Q 4"N’¯ J”7É8q7®à òÑ·ézqI$ßiÖ8³ÐGQ‘ˆ" d€,Ýr­AžÂÂYê:m„Þ4KjªÙà18aT$ðØÀÙnO+E¶ÌXσ¸E±’'®ˆÉÈBŒ+qDh¢/"HÜ‘‡ª(ÝÓ°©-ñ,?§ÀN†ó×±DØ 2£E3_(0`–ø‡˜‚W‘wR`óØÂ‹b­¤ýakMRYf[L®Þö`\PWqòw6ès /ßV:†Ц3…g‘ „ P¶®SÓÌúyË>Šç6PìEì>¦†‹îÃ4b„TDy6ÌÆ„ìIèÀª2×|;•KŠ3 ÇgªÀ™Â±y|S± ÅZ•`#²‚E¤:uY-€v?V’~A ¾8‘|âÉ1ÍRd]æžBÃ*ˆaZí2–ÛC…,–ñçFÂ>7½FÈæ¯gt7¯ÛA¬³ Cž†ˆ ‹ÃoJ¶ÁHö’1±€aóOçô·Ù6õç¸E[:«n$Ïn¦Ø ¼Ÿ( ³¾xßÜî–%Xì~!kÈŽ±ƒ b|ÌŸó¹BõLÁøSM5‹Ø÷.TЈÐ:X,M9{'œ:&KB`bOɤzÉ),±qJ]I»‡_³ë ƒC‰`QÁnx—ùÛ|0„|Ôn¯B³€¡›Kpø5r}yòsRàÛ‹„L¦TêÈ­ Љc(Ïî™8†5Ä£<ôêÀëëÏ*k»”MòÉ#CÈNšW»? Ø NEˆ7B¥Aœûy£ X(MµêX§…“™‚‡6vÒ¸d(‚P1EÝBL£ÐÝÊÉÅS§*Nd"†ÿbOÎ]ŠbÍõ™›cñ²‡nà,^êÉòîN(êL·uÒÁì­¸Ãò*uZ¤ì¤EÝìÊÞuvé¤ Lºì#Ï.EOʰ!ìxÞŒ~´A dCõùFjZ<@δ'¢j@êü£¬iñå°fB—Ì·è¤@¥#28)ßB "u5°> À 'Kl/²™uÜt§t`:61x2Ë­,€é¬q¢‚¨ë–I4I9sC©h7 ù|ugᦸP1/+yQL“¤Á‘h’SœÒ÷bÑG>º& …­LÄúiGA9…>Í*‚Fƒ ‚¿ÂW2N* ì‡Sa_Ù™Aäf8×[÷°dñ|Î I bÞÆÉ"Xœ‰0=3Ž‘õKÉÙGû÷§ôÅ,?ú }o$ÆØö³ÑÚj«×ÖõÙzN=JÇÓÁ:ï&κ#oöPà0…½Àþðœ]I¤yÙέ$#ÕìË^:E+ìô(cþ¸.4ïCh Q5¬GÕÚnGyØ£’ìX¤(&Ô5ŒÕP_½À§NýzñÊñç?‰,‹Wfîß¡ú̿ژŸÜS¯ÕG—ÊZÛˆ€¡J q\ü§#IÂX»Þ. õÚõvïãÕ…7fNС[¡ZŽPŽûû§(•2a¸jÿïÆóWÖÐîqt|}¨ô;?b*Áz3A?–ÃÕ­µ%\¹ôêêåËWάœúÕÇÎùïŸoH2¹ýáOüE<<ú!ºHÀ-t¤ÖëSD„–|¤µ²ø•“ßÿÊ?„! $H A‚ $H A‚ $H A‚ $H A‚ $H A~ÿåÿŠ’‡¼‹¢ëþIEND®B`‚wbar-2.3.4/pixmaps/dock.png0000644000175000017500000000243112025755741015624 0ustar00sotosoto00000000000000‰PNG  IHDRöFf:¼bKGDÿÿÿ ½§“ pHYs  šœtIME× ¿¦.ctEXtCommentCreated with The GIMPïd%n}IDATxÚíÝ[Oeðghhµ¢5ÖDûÞïù~ck¢Zk¤Õži9ìzÁ € »Pó’ß/Ùd33; ÏróðŸÃ(gTk]L²Þ¿VÌk’äy’Iž–Rvκ£ÑKýz’¯’,ø.ཽNò4ÉF)e|ažֺÐúu™À¹›$ù3É£RÊî¹ûZë­$ß$¹!g¸ð‚ÿ¨”òø\Š}­õn’/sÆS÷€3yäáI×àÏ,êµÖÏúR\¾q’K)¯§­ìf”ú;J=\©.É÷µÖ›§*öµÖµì]S\­Å$÷ûGÏÏ.öµÖ¥$÷3c¢\š›I¾›«Ø'ùZ©€Á¹Uk]?±Ø÷×Õ$+¤{'û£ƒ²\kýxj±¯µÞN²"#´Ï§ûƒ+€ÁZ©µ~x¨Ø×ZW’Ü– 4aýP±Oò©L «G‹ý™@3–k­ ]’ÔZ×’,Éš²º?±w'|hÏ’bíZTì åb_k%ù@Ð`±O²œÃwÇ*ö¦õÐp±÷˜;hÓR—dQФN±€v»$#9@“&]’‰ Iã.ÉX Ø—k×5ö ØWUìŸd nžíêº$»r€&-(öÐx±ß‘4idbí›Ø@ãÅ~KÐh±/¥ìÄ#ï Íbß¿y' hÎÛýbït|hÏæ~±) hοûç²€¦ì–R¶º$)¥¼I²-hÆf’t˜Ú@;Þ*öЮ©û‰\  ‡'ö¥”Ý$¯äƒ7Iÿ„»îÈŠ§²€Á{ÑèÿWìÿJ2– Ú³ý7‡Š}ßöŸÈ,ö½Ç1µ€¡Ú(¥l[ìû•r€Á'ytpAw̆¦ö0ð{’7r€Aø­”2ž»Ø—R&I~ŽSòàªý]J™ú»“&ö)¥l&ydW†p%6“ürÜÊnÖ§K)¯’<ŒÉ=\¶í$J)ÇÜGóî©Öº–äþ<ÿ ÞÛV’ŽÞÿÌž/÷+I¾M²,_¸0¯’üTJÙ™µáè´{®µŽ’ÜMr/É¢¬àÜlgïî÷OæýÀè}~Z­õ“$_$¹!{8³I’$¿N{¤Ý…ûÿN’Õ$kIVòßuø#ß Lõ.{§Ü¿Lò¤ìü©]xñîOÝ?úÊ”eÓ¶9ïãÚ~®Ûï&ß‹Ý×uÏ%×ô˜Frð·â˜ä #Ç4ðcæ39òš¶ì¸uÉÞ|”½âm%yvÚÉ<p ýDäIÇÏcIEND®B`‚wbar-2.3.4/pixmaps/Makefile.am0000644000175000017500000000021212025761263016221 0ustar00sotosoto00000000000000CLEANFILES = *~ EXTRA_DIST = $(IMAGES) pixmapsdir = @PIXMAPDIR@/@PACKAGE_NAME@ pixmaps_DATA = $(IMAGES) IMAGES = \ dock.png \ wbar.png wbar-2.3.4/pixmaps/Makefile.in0000644000175000017500000002750212027635264016250 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = pixmaps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pixmapsdir)" DATA = $(pixmaps_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ EXTRA_DIST = $(IMAGES) pixmapsdir = @PIXMAPDIR@/@PACKAGE_NAME@ pixmaps_DATA = $(IMAGES) IMAGES = \ dock.png \ wbar.png all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign pixmaps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign pixmaps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-pixmapsDATA: $(pixmaps_DATA) @$(NORMAL_INSTALL) test -z "$(pixmapsdir)" || $(MKDIR_P) "$(DESTDIR)$(pixmapsdir)" @list='$(pixmaps_DATA)'; test -n "$(pixmapsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pixmapsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pixmapsdir)" || exit $$?; \ done uninstall-pixmapsDATA: @$(NORMAL_UNINSTALL) @list='$(pixmaps_DATA)'; test -n "$(pixmapsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pixmapsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pixmapsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(pixmapsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-pixmapsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pixmapsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-pixmapsDATA install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ uninstall-am uninstall-pixmapsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/Makefile.am0000644000175000017500000000014412027634663014551 0ustar00sotosoto00000000000000CLEANFILES = *~ po/*~ SUBDIRS = src po pixmaps etc share doc EXTRA_DIST = make-conf.sh autogen.sh wbar-2.3.4/aclocal.m40000644000175000017500000017725112027635261014366 0ustar00sotosoto00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, [m4_warning([this file was generated for autoconf 2.67. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Copyright (C) 1995-2002 Free Software Foundation, Inc. # Copyright (C) 2001-2003,2004 Red Hat, Inc. # # This file is free software, distributed under the terms of the GNU # General Public License. As a special exception to the GNU General # Public License, this file may be distributed as part of a program # that contains a configuration script generated by Autoconf, under # the same distribution terms as the rest of that program. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # # Macro to add for using GNU gettext. # Ulrich Drepper , 1995, 1996 # # Modified to never use included libintl. # Owen Taylor , 12/15/1998 # # Major rework to remove unused code # Owen Taylor , 12/11/2002 # # Added better handling of ALL_LINGUAS from GNU gettext version # written by Bruno Haible, Owen Taylor 5/30/3002 # # Modified to require ngettext # Matthias Clasen 08/06/2004 # # We need this here as well, since someone might use autoconf-2.5x # to configure GLib then an older version to configure a package # using AM_GLIB_GNU_GETTEXT AC_PREREQ(2.53) dnl dnl We go to great lengths to make sure that aclocal won't dnl try to pull in the installed version of these macros dnl when running aclocal in the glib directory. dnl m4_copy([AC_DEFUN],[glib_DEFUN]) m4_copy([AC_REQUIRE],[glib_REQUIRE]) dnl dnl At the end, if we're not within glib, we'll define the public dnl definitions in terms of our private definitions. dnl # GLIB_LC_MESSAGES #-------------------- glib_DEFUN([GLIB_LC_MESSAGES], [AC_CHECK_HEADERS([locale.h]) if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your file defines LC_MESSAGES.]) fi fi]) # GLIB_PATH_PROG_WITH_TEST #---------------------------- dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # GLIB_WITH_NLS #----------------- glib_DEFUN([GLIB_WITH_NLS], dnl NLS is obligatory [USE_NLS=yes AC_SUBST(USE_NLS) gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= AC_CHECK_HEADER(libintl.h, [gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, [AC_TRY_LINK([ #include ], [return !ngettext ("","", 1)], gt_cv_func_ngettext_libc=yes, gt_cv_func_ngettext_libc=no) ]) if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, [AC_TRY_LINK([ #include ], [return !dgettext ("","")], gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no) ]) fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CHECK_FUNCS(bind_textdomain_codeset) fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then AC_CHECK_LIB(intl, bindtextdomain, [AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dgettext, gt_cv_func_dgettext_libintl=yes)])]) if test "$gt_cv_func_dgettext_libintl" != "yes" ; then AC_MSG_CHECKING([if -liconv is needed to use gettext]) AC_MSG_RESULT([]) AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dcgettext, [gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv], :,-liconv)], :,-liconv) fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset AC_CHECK_FUNCS(bind_textdomain_codeset) LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then AC_DEFINE(HAVE_GETTEXT,1, [Define if the GNU gettext() function is already present or preinstalled.]) GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" AC_CHECK_FUNCS(dcgettext) MSGFMT_OPTS= AC_MSG_CHECKING([if msgfmt accepts -c]) GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" ], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) AC_SUBST(MSGFMT_OPTS) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr], [CATOBJEXT=.gmo DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share and dnl and CATOBJEXT=.gmo in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [CATOBJEXT=.gmo DATADIRNAME=share], [CATOBJEXT=.mo DATADIRNAME=lib]) ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac]) LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi ]) if test "$gt_cv_have_gettext" = "yes" ; then AC_DEFINE(ENABLE_NLS, 1, [always defined to indicate that i18n is enabled]) fi dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is not GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po AC_OUTPUT_COMMANDS( [case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac]) dnl These rules are solely for the distribution goal. While doing this dnl we only have to keep exactly one list of the available catalogs dnl in configure.in. for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done dnl Make all variables we use known to autoconf. AC_SUBST(CATALOGS) AC_SUBST(CATOBJEXT) AC_SUBST(DATADIRNAME) AC_SUBST(GMOFILES) AC_SUBST(INSTOBJEXT) AC_SUBST(INTLLIBS) AC_SUBST(PO_IN_DATADIR_TRUE) AC_SUBST(PO_IN_DATADIR_FALSE) AC_SUBST(POFILES) AC_SUBST(POSUB) ]) # AM_GLIB_GNU_GETTEXT # ------------------- # Do checks necessary for use of gettext. If a suitable implementation # of gettext is found in either in libintl or in the C library, # it will set INTLLIBS to the libraries needed for use of gettext # and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable # gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() # on various variables needed by the Makefile.in.in installed by # glib-gettextize. dnl glib_DEFUN([GLIB_GNU_GETTEXT], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_HEADER_STDC])dnl GLIB_LC_MESSAGES GLIB_WITH_NLS if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but ($top_srcdir). dnl Try to locate is. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) dnl Generate list of files to be processed by xgettext which will dnl be included in po/Makefile. test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES ]) # AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) # ------------------------------- # Define VARIABLE to the location where catalog files will # be installed by po/Makefile. glib_DEFUN([GLIB_DEFINE_LOCALEDIR], [glib_REQUIRE([GLIB_GNU_GETTEXT])dnl glib_save_prefix="$prefix" glib_save_exec_prefix="$exec_prefix" glib_save_datarootdir="$datarootdir" test "x$prefix" = xNONE && prefix=$ac_default_prefix test "x$exec_prefix" = xNONE && exec_prefix=$prefix datarootdir=`eval echo "${datarootdir}"` if test "x$CATOBJEXT" = "x.mo" ; then localedir=`eval echo "${libdir}/locale"` else localedir=`eval echo "${datadir}/locale"` fi prefix="$glib_save_prefix" exec_prefix="$glib_save_exec_prefix" datarootdir="$glib_save_datarootdir" AC_DEFINE_UNQUOTED($1, "$localedir", [Define the location where the catalogs will be installed]) ]) dnl dnl Now the definitions that aclocal will find dnl ifdef(glib_configure_in,[],[ AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ])dnl # GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) # # Create a temporary file with TEST-FILE as its contents and pass the # file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with # 0 and perform ACTION-IF-FAIL for any other exit status. AC_DEFUN([GLIB_RUN_PROG], [cat >conftest.foo <<_ACEOF $2 _ACEOF if AC_RUN_LOG([$1 conftest.foo]); then m4_ifval([$3], [$3], [:]) m4_ifvaln([$4], [else $4])dnl echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD fi]) dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) # serial 40 IT_PROG_INTLTOOL AC_DEFUN([IT_PROG_INTLTOOL], [ AC_PREREQ([2.50])dnl AC_REQUIRE([AM_NLS])dnl case "$am__api_version" in 1.[01234]) AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ;; *) ;; esac if test -n "$1"; then AC_MSG_CHECKING([for intltool >= $1]) INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ] AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) fi AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) fi INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' _IT_SUBST(INTLTOOL_DESKTOP_RULE) _IT_SUBST(INTLTOOL_DIRECTORY_RULE) _IT_SUBST(INTLTOOL_KEYS_RULE) _IT_SUBST(INTLTOOL_PROP_RULE) _IT_SUBST(INTLTOOL_OAF_RULE) _IT_SUBST(INTLTOOL_PONG_RULE) _IT_SUBST(INTLTOOL_SERVER_RULE) _IT_SUBST(INTLTOOL_SHEET_RULE) _IT_SUBST(INTLTOOL_SOUNDLIST_RULE) _IT_SUBST(INTLTOOL_UI_RULE) _IT_SUBST(INTLTOOL_XAM_RULE) _IT_SUBST(INTLTOOL_KBD_RULE) _IT_SUBST(INTLTOOL_XML_RULE) _IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) _IT_SUBST(INTLTOOL_CAVES_RULE) _IT_SUBST(INTLTOOL_SCHEMAS_RULE) _IT_SUBST(INTLTOOL_THEME_RULE) _IT_SUBST(INTLTOOL_SERVICE_RULE) _IT_SUBST(INTLTOOL_POLICY_RULE) # Check the gettext tools to make sure they are GNU AC_PATH_PROG(XGETTEXT, xgettext) AC_PATH_PROG(MSGMERGE, msgmerge) AC_PATH_PROG(MSGFMT, msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi AC_PATH_PROG(INTLTOOL_PERL, perl) if test -z "$INTLTOOL_PERL"; then AC_MSG_ERROR([perl not found]) fi AC_MSG_CHECKING([for perl >= 5.8.1]) $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_ERROR([perl 5.8.1 is required for intltool]) else IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" AC_MSG_RESULT([$IT_PERL_VERSION]) fi if test "x$2" != "xno-xml"; then AC_MSG_CHECKING([for XML::Parser]) if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then AC_MSG_RESULT([ok]) else AC_MSG_ERROR([XML::Parser perl module is required for intltool]) fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then AC_LINK_IFELSE( [AC_LANG_PROGRAM([[]], [[extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr]])], [DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share dnl in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [DATADIRNAME=share], [DATADIRNAME=lib]) ;; *) [DATADIRNAME=lib] ;; esac]) fi AC_SUBST(DATADIRNAME) IT_PO_SUBDIR([po]) ]) # IT_PO_SUBDIR(DIRNAME) # --------------------- # All po subdirs have to be declared with this macro; the subdir "po" is # declared by IT_PROG_INTLTOOL. # AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. dnl dnl The following CONFIG_COMMANDS should be executed at the very end dnl of config.status. AC_CONFIG_COMMANDS_PRE([ AC_CONFIG_COMMANDS([$1/stamp-it], [ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) fi rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" >"$1/stamp-it.tmp" [sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ] [sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r $1/POTFILES } ' "$1/Makefile.in" >"$1/Makefile"] rm -f "$1/Makefile.tmp" mv "$1/stamp-it.tmp" "$1/stamp-it" ]) ])dnl ]) # _IT_SUBST(VARIABLE) # ------------------- # Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST # AC_DEFUN([_IT_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # deprecated macros AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) # A hint is needed for aclocal from Automake <= 1.9.4: # AC_DEFUN([AC_PROG_INTLTOOL], ...) # nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, dnl Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.50]) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE([nls], [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR wbar-2.3.4/mkinstalldirs0000755000175000017500000000370412027635264015326 0ustar00sotosoto00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain errstatus=0 dirmode="" usage="\ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help echo "$usage" 1>&2 exit 0 ;; -m) # -m PERM arg shift test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } dirmode=$1 shift ;; --) # stop option processing shift break ;; -*) # unknown option echo "$usage" 1>&2 exit 1 ;; *) # first non-opt arg break ;; esac done for file do if test -d "$file"; then shift else break fi done case $# in 0) exit 0 ;; esac case $dirmode in '') if mkdir -p -- . 2>/dev/null; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" fi ;; *) if mkdir -m "$dirmode" -p -- . 2>/dev/null; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" fi ;; esac for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case $pathcomp in -*) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr else if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" lasterr="" chmod "$dirmode" "$pathcomp" || lasterr=$? if test ! -z "$lasterr"; then errstatus=$lasterr fi fi fi fi pathcomp="$pathcomp/" done done exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 # End: # mkinstalldirs ends here wbar-2.3.4/share/0000755000175000017500000000000012027635465013621 5ustar00sotosoto00000000000000wbar-2.3.4/share/Makefile.am0000644000175000017500000000015411667227673015664 0ustar00sotosoto00000000000000CLEANFILES = *~ gladedir = @GLADE_PACKAGE_DIR@ glade_DATA = @PACKAGE@.glade EXTRA_DIST = \ $(glade_DATA) wbar-2.3.4/share/wbar.glade0000644000175000017500000023165412025755741015563 0ustar00sotosoto00000000000000 False 5 False center-always dialog center True False 2 True False end True True True False True False True False gtk-close False True 0 True False _Cancel True True True 1 False False 0 True True True False True False True False gtk-apply False True 0 True False _Accept True True True 1 False False 1 False True end 0 True False 5 5 True False 0 <b>Title</b> True False True 0 True True â— False False True True False True 1 True False 0 <b>Command</b> True False True 2 True False True True â— False False True True True True 0 ... True True True False False False 1 False True 3 True False 0 <b>Icon</b> True False True 4 True False True True â— False False True True True True 0 ... True True True False False True 1 False True 5 False False 1 False 5 Settings False center-always dialog True False 2 True False end True True True False True False True False gtk-about False True 0 True False _About True True True 1 False False 0 True True True False True False True False gtk-close False True 0 True False _Close True True True 1 False False 1 True True True False True False True False gtk-refresh False True 0 True False _Reload True True True 1 False False 2 False True end 0 True True True False True False True False New False New True gtk-new False True True False False Edit False Edit True gtk-edit False True True False False Delete False Delete True gtk-delete False True False True 0 True False 5 5 True False 0 etched-out True True automatic automatic True True label_item True True 0 True False 5 5 True False 2 True False True True Up False True False gtk-go-up True False True True Down False True False gtk-go-down 1 2 False True end 9 False False 1 True True 1 True False Icons False tab True False 10 5 True False 5 True False 5 10 ... True True True False 4 5 GTK_FILL True True False â— False False True True 3 4 True True â— False False True True 10 10 24 1 0 0 1 2 GTK_FILL True False 0 Size: GTK_FILL True False 0 Font: 2 3 GTK_FILL False True 0 True False 3 10 ... True True True False 2 3 GTK_FILL True True â— False False True True 1 2 True False 0 Bar image: GTK_FILL False True 1 False True 0 True False False True 1 True False 10 2 4 Icon gets pressed True True False False True Run above the desktop True True False False True 1 2 Vertical bar True True False False True 2 3 Disable font rendering True True False False True 3 4 Position screen True True False False True 4 5 100 True False False 1 2 4 5 GTK_FILL Border offset True True False False True 6 7 True False True • False False True True 0 0 200 1 0 0 1 2 6 7 GTK_FILL No reload bar True True False False True 7 8 Enable taskbar True True False False True 8 9 Inverting icons growth True True False False True 5 6 Reflection percentage True True False False True 9 10 True False True â— False False True True 10 0 100 1 10 0 1 2 9 10 GTK_FILL False True 2 1 True False Preferences 2 False tab True False 5 10 2 4 Icon size True True False False True True False True â— False False True True 24 24 64 1 0 0 1 2 GTK_FILL Jump factor True True False False True 4 5 Zoom factor True True False False True 3 4 Number of animated icons True True False False True 2 3 Icon distance True True False False True 1 2 Filter color True True False False True 9 10 Color filter mode True True False False True 8 9 Bar unfocused alfa level True True False False True 7 8 Bar alfa level True True False False True 6 7 Time for double click [ms] True True False False True 5 6 True False True â— False False True True 1 1 32 1 0 0 1 2 1 2 GTK_FILL True False True â— False False True True 5 1 100 1 0 0 1 2 2 3 GTK_FILL True False True â— False False True True 1.8 0.10000000000000001 10 0.10000000000000001 0 0 1 1 2 3 4 GTK_FILL True False True â— False False True True 1 0.10000000000000001 10 0.10000000000000001 0 0 1 1 2 4 5 GTK_FILL True False True â— False False True True 250 0 500 1 0 0 1 2 5 6 GTK_FILL True False True â— False False True True 90 0 100 1 0 0 1 2 6 7 GTK_FILL True False True â— False False True True 60 0 100 1 0 0 1 2 7 8 GTK_FILL True False False 1 2 8 9 GTK_FILL 70 True False True True False #000000000000 1 2 9 10 GTK_FILL 2 True False Effects 2 False tab True True 1 True False Edit True False False False True False gtk-edit Delete True False False False True False gtk-delete wbar-2.3.4/share/Makefile.in0000644000175000017500000002736612027635264015701 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = share DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(gladedir)" DATA = $(glade_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ gladedir = @GLADE_PACKAGE_DIR@ glade_DATA = @PACKAGE@.glade EXTRA_DIST = \ $(glade_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign share/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign share/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-gladeDATA: $(glade_DATA) @$(NORMAL_INSTALL) test -z "$(gladedir)" || $(MKDIR_P) "$(DESTDIR)$(gladedir)" @list='$(glade_DATA)'; test -n "$(gladedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gladedir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(gladedir)" || exit $$?; \ done uninstall-gladeDATA: @$(NORMAL_UNINSTALL) @list='$(glade_DATA)'; test -n "$(gladedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(gladedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(gladedir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(gladedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-gladeDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-gladeDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-gladeDATA \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ uninstall-am uninstall-gladeDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/po/0000755000175000017500000000000012027635465013135 5ustar00sotosoto00000000000000wbar-2.3.4/po/de.po0000644000175000017500000002306412027635272014066 0ustar00sotosoto00000000000000# German translation for wbarconf. # Copyright (C) YEAR ORGANIZATION # Yadickson Soto , 2009. # msgid "" msgstr "" "Project-Id-Version: wbar 2.0.0\n" "Report-Msgid-Bugs-To: \n" "PO-Revision-Date: 2012-03-16 18:08+0100\n" "Last-Translator: D.M-Wilhelm (Leiche) \n" "Language-Team: Deutsch \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" msgid "Command" msgstr "Befehl" msgid "Icon" msgstr "Symbol" msgid "Title" msgstr "Titel" msgid "Bar alfa level" msgstr "Transparenz der Leiste" msgid "Bar image:" msgstr "Hintergrundbild:" msgid "Bar unfocused alfa level" msgstr "Transparenz der inaktiven Leiste" msgid "Border offset" msgstr "Border-Offset" msgid "Color filter mode" msgstr "Farbfiltermodus" msgid "Delete" msgstr "Löschen" msgid "Disable font rendering" msgstr "Schriftanzeige unterdrücken" msgid "Down" msgstr "Nach unten" msgid "Edit" msgstr "Bearbeiten" msgid "Effects" msgstr "Effekte" msgid "Enable taskbar" msgstr "Taskbar (Fensterliste) aktivieren" msgid "Filter color" msgstr "Filterfarbe" msgid "Font:" msgstr "Schrift:" msgid "Icon distance" msgstr "Symbolabstand" msgid "Icon gets pressed" msgstr "Symbole werden beim Anklicken gedrückt" msgid "Icon size" msgstr "Symbolgröße" msgid "Icons" msgstr "Symbole" msgid "Inverting icons growth" msgstr "Umgekehrte Symbolanimation" msgid "Jump factor" msgstr "Jump-Faktor" msgid "New" msgstr "Neu" msgid "No reload bar" msgstr "Leiste nicht neu starten" msgid "Number of animated icons" msgstr "Zahl der animierten Symbole" msgid "Position screen" msgstr "Position auf dem Bildschirm" msgid "Preferences" msgstr "Einstellungen" msgid "Reflection percentage" msgstr "Symbol (Icon) spiegeln" msgid "Run above the desktop" msgstr "Wbar oberhalb eines Desktopmanagers" msgid "Settings" msgstr "Einstellungen" msgid "Size:" msgstr "Größe:" msgid "Time for double click [ms]" msgstr "Doppelklickintervall in Millisekunden" msgid "Up" msgstr "Nach oben" msgid "Vertical bar" msgstr "Vertikale Anordnung" msgid "Zoom factor" msgstr "Zoomfaktor" msgid "_About" msgstr "_Über" msgid "_Accept" msgstr "_Übernehmen" msgid "_Cancel" msgstr "_Abbrechen" msgid "_Close" msgstr "_Schließen" msgid "_Reload" msgstr "_Neu laden" msgid "Icon" msgstr "Symbol" msgid "Title" msgstr "Titel" msgid "Command" msgstr "Befehl" msgid "top" msgstr "Oben" msgid "bottom" msgstr "Unten" msgid "left" msgstr "Links" msgid "right" msgstr "Rechts" msgid "center" msgstr "Mitte" msgid "bot-left" msgstr "Unten links" msgid "bot-right" msgstr "Unten rechts" msgid "top-left" msgstr "Oben links" msgid "top-right" msgstr "Oben rechts" msgid "none" msgstr "Kein" msgid "hovered" msgstr "Nur hervorgehobene Symbole" msgid "others" msgstr "Alle nicht hervorgehobenen Symbole" msgid "all" msgstr "Alle" msgid "Configuration empty." msgstr "Leere Konfiguration." msgid "Error save config in " msgstr "Fehler gespeichert in" msgid "Fields must not be empty" msgstr "Felder müssen ausgefüllt sein" msgid "Open exec file" msgstr "Öffnen einer ausführbaren Datei" msgid "Open image file" msgstr "Öffnen einer Bilddatei" msgid "Images" msgstr "Bilddateien" msgid "Open font file" msgstr "Öffnen einer Schriftdatei" msgid "Fonts" msgstr "Schriften" msgid "About" msgstr "Über" msgid "wbar config" msgstr "Wbar config" msgid "License GPL - 2010" msgstr "Lizenz GPL - 2010" msgid "A light and fast launch bar." msgstr "Eine leichte und schnelle Schnellstartleiste." msgid "wbar project website" msgstr "WBAR Projektseite" msgid "Error run program: " msgstr "Fehler laufenden Programm:" msgid "Error kill program: " msgstr "Fehler beendet Programm: " msgid " Image not found. Maybe using a relative path?" msgstr "Symbol nicht gefunden. Eventuell in einem anderen Verzeichnis?" msgid "Invalid bar position." msgstr "Ungültige Position der Leiste." msgid "Set default bar position." msgstr "Setze Leiste auf Standard Position." msgid " Couldn't load icon image." msgstr "Symbol konnte nicht geladen werden." msgid "Version of " msgstr "Version" msgid "Usage: wbar [option] ... [option]" msgstr "Anwendung: wbar [Option] ... [Option]" msgid "Options:" msgstr "Optionen:" msgid "this help" msgstr "Diese Hilfe" msgid "show version" msgstr "Version zeigen" msgid "conf-file (eg: $HOME/.wbar)" msgstr "conf-Datei (zB: $HOME/.wbar)" msgid "run above a desktop app (ie: xfdesktop)" msgstr "Wbar oberhalb eines Desktopmanagers (zB: XFDesktop)" msgid "enable taskbar" msgstr "Taskbar (Fensterliste) aktivieren" msgid "right click does not force reload anymore" msgstr "Rechtsklick zum erneuten starten der Leiste abgestellt" msgid "offset bar (eg: 20)" msgstr "Offset Bar (zB: 20)" msgid "icon size (eg: 32)" msgstr "Symbolgröße (zB: 32)" msgid "icon dist (eg: 1)" msgstr "Symbolabstand (zB: 1)" msgid "zoom factor (eg: 1.8 or 2.5)" msgstr "Zoom Faktor (zB: 1.8 oder 2.5)" msgid "jump factor (eg: 1.0 or 0.0)" msgstr "Spring Faktor (zB: 1.0 oder 0.0)" msgid "position:" msgstr "Position:" msgid "inverting icons growth" msgstr "Umgekehrte Symbolanimation" msgid "time in ms for double click (0: single click)" msgstr "Doppelklickintervall in Millisekunden (0: Einfach Klick)" msgid "icon gets pressed" msgstr "Symbole werden beim Anklicken gedrückt" msgid "vertical bar" msgstr "Vertikale Leiste" msgid "bar alfa (0-100)" msgstr "Bar Alfa (0-100)" msgid "reflection size in percents (0-100)" msgstr "Spiegelgröße in Prozent (0-100)" msgid "unfocused bar alfa (0-100)" msgstr "Transparenz der inaktiven Leiste (0-100)" msgid "color filter (0: none 1: hovered 2: others, 3: all)" msgstr "Farben Filter (0: nichts 1: schweben 2: andere, 3: alle)" msgid "filter color (default green 0xff00c800)" msgstr "Filter Farbe (standard grün 0xff00c800)" msgid "number of animated icons: 1, 3, 5, 7, 9, ..." msgstr "Zahl der animierten Symbole" msgid "if set disables font rendering" msgstr "Schriftanzeige unterdrücken" msgid "View man(1)." msgstr "Man Seiten(1) anzeigen." msgid "Problem load font file." msgstr "Problem beim laden der Schriftdatei." msgid "Couldn't open display" msgstr "Anzeige konnte nicht geöffnet werden" msgid "Couldn't get visual" msgstr "Konnte optisch nicht angezeigt werden" msgid "Couln't get colormap" msgstr "Farbtabelle konnte nicht geöffnet werden" msgid "Couldn't get depth" msgstr "" msgid "Couldn't create window" msgstr "Fenster konnte nicht erstellt werden" msgid "windowIcon() -- XGetWindowProperty" msgstr "" msgid "Error copy file: " msgstr "Fehlerprotokoll speichern: " #~ msgid "Warlock Bar" #~ msgstr "Warlock Bar" #~ msgid "investing icons growth" #~ msgstr "Umgekehrte Symbolanimation" #~ msgid "Icon name:" #~ msgstr "Symbol:" #~ msgid "_Settings" #~ msgstr "_Einstellungen" #~ msgid "Font size:" #~ msgstr "Symbolgröße" #~ msgid "wbar" #~ msgstr "wbar" #~ msgid "Command line settings" #~ msgstr "Befehlszeilenoptionen" #~ msgid "Close this window" #~ msgstr "Dieses Fenster schließen" #~ msgid "Refresh" #~ msgstr "Aktualisieren" #~ msgid "Restart wbar to see the changes, don't forget to save." #~ msgstr "Starten Sie wbar neu, nachdem Sie die Konfiguration gespeichert haben." #~ msgid "Saving..." #~ msgstr "Speichern..." #~ msgid "" #~ "Icon list is empty!\n" #~ " Not saving, sorry!" #~ msgstr "" #~ "Symbolliste ist leer!\n" #~ " Speichern nicht möglich!" #~ msgid "Empty icon list" #~ msgstr "Leere Symbolliste" #~ msgid "About WbarConf" #~ msgstr "Über Wbarconf" #~ msgid "Created by" #~ msgstr "Entwickelt von" #~ msgid "WbarConf v" #~ msgstr "Wbarconf v" #~ msgid "WbarConf - wbar configuration tool" #~ msgstr "Wbarconf - Konfigurationswerkzeug für Wbar" #~ msgid "Open command line settings dialog" #~ msgstr "Dialog der Befehlszeileneinstellungen öffnen" #~ msgid "Close the application" #~ msgstr "Schließen der Anwendung" #~ msgid "File" #~ msgstr "Datei" #~ msgid "Help" #~ msgstr "Hilfe" #~ msgid "Drag and Drop to change order" #~ msgstr "Sortieren mit der Maus, um die Anordnung zu verändern" #~ msgid "Add new" #~ msgstr "Neu" #~ msgid "Add new item" #~ msgstr "Neuer Eintrag" #~ msgid "Remove" #~ msgstr "Entfernen" #~ msgid "Remove selected item" #~ msgstr "Ausgewählten Eintrage entfernen" #~ msgid "Move selected item downwards" #~ msgstr "Verschiebt ausgewählten Eintrag nach unten" #~ msgid "Move selected item upwards" #~ msgstr "Verschiebt ausgewählten Eintrag nach oben" #~ msgid "Full font path" #~ msgstr "Kompletter Pfad zur Schriftdatei" #~ msgid "Open font file selection dialog" #~ msgstr "Dialog zur Schriftenauswahl öffnen" #~ msgid "Open file selection dialog" #~ msgstr "Öffnen des Dateiauswahldialogs" #~ msgid "Title:" #~ msgstr "Titel:" #~ msgid "Open icon file selection dialog" #~ msgstr "Öffnen des Dialogs zur Symbolauswahl" #~ msgid "Restart wbar for saved changes to take effect" #~ msgstr "Wbar neustarten, um Änderungen zu überprüfen" #~ msgid "Save" #~ msgstr "Speichern" #~ msgid "Save settings" #~ msgstr "Einstellungen speichern" #~ msgid "Quit, without saving changes." #~ msgstr "Beenden, ohne zu speichern." #~ msgid "Executing: " #~ msgstr "Ausführen: " #~ msgid "Restarting: " #~ msgstr "Neu starten: " #~ msgid "Select image file.." #~ msgstr "Bilddatei auswählen..." #~ msgid "All files" #~ msgstr "Alle Dateien" #~ msgid "Select background image file.." #~ msgstr "Hintergrundbild auswählen..." #~ msgid "' not found..." #~ msgstr "' nicht gefunden..." #~ msgid "File '" #~ msgstr "Datei '" #~ msgid "Select command.." #~ msgstr "Befehl auswählen..." #~ msgid "New item" #~ msgstr "Neuer Eintrag" wbar-2.3.4/po/Makefile.in.in0000644000175000017500000001537712027635264015621 0ustar00sotosoto00000000000000# Makefile for program source directory in GNU NLS utilities package. # Copyright (C) 1995, 1996, 1997 by Ulrich Drepper # Copyright (C) 2004-2008 Rodney Dawes # # This file may be copied and used freely without restrictions. It may # be used in projects which are not available under a GNU Public License, # but which still want to provide support for the GNU gettext functionality. # # - Modified by Owen Taylor to use GETTEXT_PACKAGE # instead of PACKAGE and to look for po2tbl in ./ not in intl/ # # - Modified by jacob berkman to install # Makefile.in.in and po2tbl.sed.in for use with glib-gettextize # # - Modified by Rodney Dawes for use with intltool # # We have the following line for use by intltoolize: # INTLTOOL_MAKEFILE GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = @top_builddir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ DATADIRNAME = @DATADIRNAME@ itlocaledir = $(prefix)/$(DATADIRNAME)/locale subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. # Until it can be supposed, use the safe fallback: mkdir_p = $(install_sh) -d INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot ALL_LINGUAS = @ALL_LINGUAS@ PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) DISTFILES = Makefile.in.in POTFILES.in $(POFILES) EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS POTFILES = \ # This comment gets stripped out CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) .SUFFIXES: .SUFFIXES: .po .pox .gmo .mo .msg .cat .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(MSGFMT) -o $@ $< .po.gmo: file=`echo $* | sed 's,.*/,,'`.gmo \ && rm -f $$file && $(GMSGFMT) -o $$file $< .po.cat: sed -f ../intl/po2msg.sed < $< > $*.msg \ && rm -f $@ && gencat $@ $*.msg all: all-@USE_NLS@ all-yes: $(CATALOGS) all-no: $(GETTEXT_PACKAGE).pot: $(POTFILES) $(GENPOT) install: install-data install-data: install-data-@USE_NLS@ install-data-no: all install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ else \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $(srcdir)/$$lang.gmo as" \ "$$dir/$(GETTEXT_PACKAGE).mo"; \ fi; \ if test -r $$lang.gmo.m; then \ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ if test -r $(srcdir)/$$lang.gmo.m ; then \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $(srcdir)/$$lang.gmo.m as" \ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ true; \ fi; \ fi; \ done # Empty stubs to satisfy archaic automake needs dvi info ctags tags CTAGS TAGS ID: # Define this as empty until I found a useful application. install-exec installcheck: uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot rm -f missing notexist srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi mostlyclean: rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp rm -f .intltool-merge-cache clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES stamp-it rm -f *.mo *.msg *.cat *.cat.m *.gmo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f Makefile.in.in distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(DISTFILES) dists="$(DISTFILES)"; \ extra_dists="$(EXTRA_DISTFILES)"; \ for file in $$extra_dists; do \ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ done; \ for file in $$dists; do \ test -f $$file || file="$(srcdir)/$$file"; \ ln $$file $(distdir) 2> /dev/null \ || cp -p $$file $(distdir); \ done update-po: Makefile $(MAKE) $(GETTEXT_PACKAGE).pot tmpdir=`pwd`; \ linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ echo "$$lang:"; \ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ if $$result; then \ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.gmo failed!"; \ rm -f $$tmpdir/$$lang.new.po; \ fi; \ done Makefile POTFILES: stamp-it @if test ! -f $@; then \ rm -f stamp-it; \ $(MAKE) stamp-it; \ fi stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: wbar-2.3.4/po/es.po0000644000175000017500000001627612027635272014114 0ustar00sotosoto00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) 2010 wbar COPYRIGHT HOLDER # This file is distributed under the same license as the wbar package. # Yadickson Soto , 2010, 2011. # msgid "" msgstr "" "Project-Id-Version: wbar es\n" "Report-Msgid-Bugs-To: \n" "PO-Revision-Date: 2011-05-06 11:38-0400\n" "Last-Translator: Yadickson Soto \n" "Language-Team: ES \n" "Language: ES\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" msgid "Command" msgstr "Comando" msgid "Icon" msgstr "Icono" msgid "Title" msgstr "Título" msgid "Bar alfa level" msgstr "Nivel alfa de la barra" msgid "Bar image:" msgstr "Imagen de barra" msgid "Bar unfocused alfa level" msgstr "Nivel de desenfoque de la barra" msgid "Border offset" msgstr "Separación del borde" msgid "Color filter mode" msgstr "Modo de filtro de color" msgid "Delete" msgstr "Borrar" msgid "Disable font rendering" msgstr "Deshabilitar texto" msgid "Down" msgstr "Abajo" msgid "Edit" msgstr "Editar" msgid "Effects" msgstr "Efectos" msgid "Enable taskbar" msgstr "Habilitar la barra de tarea" msgid "Filter color" msgstr "Filtro de color" msgid "Font:" msgstr "Fuente:" msgid "Icon distance" msgstr "Distancia entre iconos" msgid "Icon gets pressed" msgstr "Icono se presiona" msgid "Icon size" msgstr "Tamaño de icono" msgid "Icons" msgstr "Iconos" msgid "Inverting icons growth" msgstr "Invertir crecimineto de iconos" msgid "Jump factor" msgstr "Factor de salto" msgid "New" msgstr "Nuevo" msgid "No reload bar" msgstr "No recarga la barra" msgid "Number of animated icons" msgstr "Numero de iconos animados" msgid "Position screen" msgstr "Posición en pantalla" msgid "Preferences" msgstr "Preferencias" msgid "Reflection percentage" msgstr "Porcentaje de reflexión" msgid "Run above the desktop" msgstr "Ejecutar sobre el escritorio" msgid "Settings" msgstr "Configuración" msgid "Size:" msgstr "Tamaño:" msgid "Time for double click [ms]" msgstr "Tiempo para doble click [ms]" msgid "Up" msgstr "Arriba" msgid "Vertical bar" msgstr "Barra vertical" msgid "Zoom factor" msgstr "Factor de zoom" msgid "_About" msgstr "_Acerca de" msgid "_Accept" msgstr "_Aceptar" msgid "_Cancel" msgstr "_Cancelar" msgid "_Close" msgstr "_Cerrar" msgid "_Reload" msgstr "_Recargar" msgid "Icon" msgstr "Icono" msgid "Title" msgstr "Título" msgid "Command" msgstr "Comando" msgid "top" msgstr "arriba" msgid "bottom" msgstr "abajo" msgid "left" msgstr "izquierda" msgid "right" msgstr "derecha" msgid "center" msgstr "centrar" msgid "bot-left" msgstr "izquierda-abajo" msgid "bot-right" msgstr "derecha-abajo" msgid "top-left" msgstr "izquierda-arriba" msgid "top-right" msgstr "derecha-arriba" msgid "none" msgstr "ninguno" msgid "hovered" msgstr "inmóvil" msgid "others" msgstr "otros" msgid "all" msgstr "todos" msgid "Configuration empty." msgstr "Configuración vacía." msgid "Error save config in " msgstr "Error al guardar la configuración en " msgid "Fields must not be empty" msgstr "Los campos no deben estar vacíos" msgid "Open exec file" msgstr "Abrir archivo ejecutable" msgid "Open image file" msgstr "Abrir archivo de imagen" msgid "Images" msgstr "Imagenes" msgid "Open font file" msgstr "Abrir archivo de fuente" msgid "Fonts" msgstr "Fuentes" msgid "About" msgstr "Acerca de" msgid "wbar config" msgstr "configuración wbar" msgid "License GPL - 2010" msgstr "Licencia GPL - 2010" msgid "A light and fast launch bar." msgstr "Una ligera y rápida barra de inicio." msgid "wbar project website" msgstr "sitio web del proyecto wbar" msgid "Error run program: " msgstr "Error ejecutando programa: " msgid "Error kill program: " msgstr "Error terminando programa: " msgid " Image not found. Maybe using a relative path?" msgstr " Imagen no encontrada. ¿Tal vez estas utilizando una ruta relativa?" msgid "Invalid bar position." msgstr "Posición de la barra no valida." msgid "Set default bar position." msgstr "Establecer posición de la barra por defecto." msgid " Couldn't load icon image." msgstr " No se puede cargar la imagen del icono" msgid "Version of " msgstr "Versión de " msgid "Usage: wbar [option] ... [option]" msgstr "Usar: wbar [opción] ... [opción]" msgid "Options:" msgstr "Opciones:" msgid "this help" msgstr "esta ayuda" msgid "show version" msgstr "mostrar versión" msgid "conf-file (eg: $HOME/.wbar)" msgstr "conf-file (ejemplo: $HOME/.wbar)" msgid "run above a desktop app (ie: xfdesktop)" msgstr "Ejecutar sobre el escritorio (ejemplo: xfdesktop)" msgid "enable taskbar" msgstr "habilitar en barra de tarea" msgid "right click does not force reload anymore" msgstr "no forzar la recarga con un click derecho" msgid "offset bar (eg: 20)" msgstr "desplazamiento de la barra (ejemplo: 20)" msgid "icon size (eg: 32)" msgstr "tamaño del icono (ejemplo: 32)" msgid "icon dist (eg: 1)" msgstr "distancia entre iconos (ejemplo: 1)" msgid "zoom factor (eg: 1.8 or 2.5)" msgstr "factor de zoom (ejemplo: 1.8 o 2.5)" msgid "jump factor (eg: 1.0 or 0.0)" msgstr "factor de salto (ejemplo: 1.0 o 0.0)" msgid "position:" msgstr "posición:" msgid "inverting icons growth" msgstr "Invertir crecimineto de iconos" msgid "time in ms for double click (0: single click)" msgstr "tiempo para doble click [ms] (0: simple click)" msgid "icon gets pressed" msgstr "icono se presiona" msgid "vertical bar" msgstr "barra vertical" msgid "bar alfa (0-100)" msgstr "alfa de barra (0-100)" msgid "reflection size in percents (0-100)" msgstr "Tamaño de reflexión en porcentaje (0-100)" msgid "unfocused bar alfa (0-100)" msgstr "nivel de desenfoque de la barra (0-100)" msgid "color filter (0: none 1: hovered 2: others, 3: all)" msgstr "filtrar color (0: ninguno, 1: alrededor, 2: otros, 3: todos)" msgid "filter color (default green 0xff00c800)" msgstr "color de filtro (defecto verde 0xff00c800)" msgid "number of animated icons: 1, 3, 5, 7, 9, ..." msgstr "numero de iconos animados: 1, 3, 5, 7, 9, ..." msgid "if set disables font rendering" msgstr "deshabilitar texto" msgid "View man(1)." msgstr "Ver manual (1)." msgid "Problem load font file." msgstr "Problema al cargar el archivo de fuente." msgid "Couldn't open display" msgstr "No se puede acceder a la pantalla" msgid "Couldn't get visual" msgstr "No se puede obtener el componente visual" msgid "Couln't get colormap" msgstr "No se puede obtener el mapa de colores" msgid "Couldn't get depth" msgstr "No se puede obtener el fondo" msgid "Couldn't create window" msgstr "No se puede crear la ventana" msgid "windowIcon() -- XGetWindowProperty" msgstr "windowIcon() -- XGetWindowProperty" msgid "Error copy file: " msgstr "Error copiando archivo: " #~ msgid "Warlock Bar" #~ msgstr "Barra Warlock" #~ msgid "investing icons growth" #~ msgstr "invertir crecimineto de iconos" #~ msgid "Invalid icon grow bar." #~ msgstr "Crecimiento de iconos en la barra no valida." #~ msgid "Set default icon grow bar." #~ msgstr "Establecer crecimiento de iconos en la barra por defecto." #~ msgid "set the icons in bar to grow:" #~ msgstr "establecer el crecimiento de los iconos en la barra:" #~ msgid "normal" #~ msgstr "normal" #~ msgid "inverted" #~ msgstr "invertido" wbar-2.3.4/po/POTFILES.in0000644000175000017500000000100012027635271014674 0ustar00sotosoto00000000000000share/wbar.glade src/config/Functions.cc src/config/Functions.h src/config/MainConfig.cc src/config/Run.cc src/config/Run.h src/core/Bar.cc src/core/Bar.h src/core/Icon.cc src/core/Icon.h src/core/ImgWrap.h src/core/Main.cc src/core/SuperBar.cc src/core/SuperBar.h src/core/SuperIcon.cc src/core/SuperIcon.h src/core/XWin.cc src/core/XWin.h src/utils/App.cc src/utils/App.h src/utils/Config.cc src/utils/Config.h src/utils/i18n.h src/utils/OptParser.cc src/utils/OptParser.h src/utils/Utils.cc src/utils/Utils.h wbar-2.3.4/po/fi.po0000644000175000017500000001745212027635272014100 0ustar00sotosoto00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR ORGANIZATION # Yadickson Soto , 2009. # msgid "" msgstr "" "Project-Id-Version: wbar 2.0.0\n" "Report-Msgid-Bugs-To: \n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Yadickson Soto \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" "Generated-By: pygettext.py 1.5\n" msgid "Command" msgstr "" msgid "Icon" msgstr "" msgid "Title" msgstr "" msgid "Bar alfa level" msgstr "Palkin läpinäkyvyys %" msgid "Bar image:" msgstr "" msgid "Bar unfocused alfa level" msgstr "Valitsemattoman palkin läpinäkyvyys %" msgid "Border offset" msgstr "" msgid "Color filter mode" msgstr "Värin suodatustila" msgid "Delete" msgstr "" msgid "Disable font rendering" msgstr "Tekstin esitys pois päältä" msgid "Down" msgstr "Alas" msgid "Edit" msgstr "" msgid "Effects" msgstr "" msgid "Enable taskbar" msgstr "" msgid "Filter color" msgstr "Suodatusväri" msgid "Font:" msgstr "Fontti:" msgid "Icon distance" msgstr "Kuvakkeiden etäisyys" msgid "Icon gets pressed" msgstr "Kuvake tulee painetuksi" msgid "Icon size" msgstr "Kuvakkeen koko" msgid "Icons" msgstr "Kuvakes" msgid "Inverting icons growth" msgstr "" msgid "Jump factor" msgstr "Hyppykerroin" msgid "New" msgstr "" msgid "No reload bar" msgstr "" msgid "Number of animated icons" msgstr "Animoitavien kuvakkeiden lukumäärä" msgid "Position screen" msgstr "Sijainti näytöllä" msgid "Preferences" msgstr "" msgid "Reflection percentage" msgstr "" msgid "Run above the desktop" msgstr "Suorita työpöytäsovellusten yllä" msgid "Settings" msgstr "Asetukset" msgid "Size:" msgstr "" msgid "Time for double click [ms]" msgstr "Tuplaklikkausviive millisekunteina" msgid "Up" msgstr "Ylös" msgid "Vertical bar" msgstr "Pystypalkki" msgid "Zoom factor" msgstr "Suurennuskerroin" msgid "_About" msgstr "_Tietoa" msgid "_Accept" msgstr "" msgid "_Cancel" msgstr "" msgid "_Close" msgstr "" msgid "_Reload" msgstr "" msgid "Icon" msgstr "" msgid "Title" msgstr "Otsikko" msgid "Command" msgstr "" msgid "top" msgstr "ylhäällä" msgid "bottom" msgstr "alhaalla" msgid "left" msgstr "" msgid "right" msgstr "oikealla" msgid "center" msgstr "" msgid "bot-left" msgstr "" msgid "bot-right" msgstr "" msgid "top-left" msgstr "ylhäällä vasemmalla" msgid "top-right" msgstr "ylhäällä oikealla" msgid "none" msgstr "ei mikään" msgid "hovered" msgstr "leijaileva" msgid "others" msgstr "muut" msgid "all" msgstr "kaikki" msgid "Configuration empty." msgstr "" msgid "Error save config in " msgstr "" msgid "Fields must not be empty" msgstr "" msgid "Open exec file" msgstr "" msgid "Open image file" msgstr "" msgid "Images" msgstr "Kuvat" msgid "Open font file" msgstr "" msgid "Fonts" msgstr "" msgid "About" msgstr "Tietoa" msgid "wbar config" msgstr "" msgid "License GPL - 2010" msgstr "" msgid "A light and fast launch bar." msgstr "" msgid "wbar project website" msgstr "" msgid "Error run program: " msgstr "" msgid "Error kill program: " msgstr "" msgid " Image not found. Maybe using a relative path?" msgstr "" msgid "Invalid bar position." msgstr "" msgid "Set default bar position." msgstr "" msgid " Couldn't load icon image." msgstr "" msgid "Version of " msgstr "" msgid "Usage: wbar [option] ... [option]" msgstr "" msgid "Options:" msgstr "" msgid "this help" msgstr "" msgid "show version" msgstr "" msgid "conf-file (eg: $HOME/.wbar)" msgstr "" #, fuzzy msgid "run above a desktop app (ie: xfdesktop)" msgstr "Suorita työpöytäsovellusten yllä" msgid "enable taskbar" msgstr "" msgid "right click does not force reload anymore" msgstr "" msgid "offset bar (eg: 20)" msgstr "" msgid "icon size (eg: 32)" msgstr "" msgid "icon dist (eg: 1)" msgstr "" msgid "zoom factor (eg: 1.8 or 2.5)" msgstr "" msgid "jump factor (eg: 1.0 or 0.0)" msgstr "" msgid "position:" msgstr "" msgid "inverting icons growth" msgstr "" #, fuzzy msgid "time in ms for double click (0: single click)" msgstr "Tuplaklikkausviive millisekunteina" msgid "icon gets pressed" msgstr "" msgid "vertical bar" msgstr "" msgid "bar alfa (0-100)" msgstr "" msgid "reflection size in percents (0-100)" msgstr "" msgid "unfocused bar alfa (0-100)" msgstr "" msgid "color filter (0: none 1: hovered 2: others, 3: all)" msgstr "" msgid "filter color (default green 0xff00c800)" msgstr "" msgid "number of animated icons: 1, 3, 5, 7, 9, ..." msgstr "" msgid "if set disables font rendering" msgstr "" msgid "View man(1)." msgstr "" msgid "Problem load font file." msgstr "" msgid "Couldn't open display" msgstr "" msgid "Couldn't get visual" msgstr "" msgid "Couln't get colormap" msgstr "" msgid "Couldn't get depth" msgstr "" msgid "Couldn't create window" msgstr "" msgid "windowIcon() -- XGetWindowProperty" msgstr "" msgid "Error copy file: " msgstr "" #~ msgid "Icon name:" #~ msgstr "Kuvake:" #~ msgid "_Settings" #~ msgstr "_Asetukset" #~ msgid "Font size:" #~ msgstr "Kuvakkeen koko" #~ msgid "wbar" #~ msgstr "wbar" #~ msgid "Command line settings" #~ msgstr "Komentorivi asetukset" #~ msgid "Close this window" #~ msgstr "Sulje ikkuna" #~ msgid "Refresh" #~ msgstr "Päivitä" #~ msgid "Restart wbar to see the changes, don't forget to save." #~ msgstr "Käynnistä wbar uudelleen nähdäksesi muutokset, ethän unohda tallentaa." #~ msgid "Saving..." #~ msgstr "Tallennetaan..." #~ msgid "" #~ "Icon list is empty!\n" #~ " Not saving, sorry!" #~ msgstr "Tyhjää listaa ei tallenneta!" #~ msgid "Empty icon list" #~ msgstr "Lista on tyhjä!" #~ msgid "About WbarConf" #~ msgstr "Tietoa sovelluksesta WbarConf" #~ msgid "Created by" #~ msgstr "Tehnyt" #~ msgid "WbarConf v" #~ msgstr "WbarConf v" #~ msgid "WbarConf - wbar configuration tool" #~ msgstr "WbarConf - wbar asetustyökalu" #~ msgid "Open command line settings dialog" #~ msgstr "Avaa komentorivin asetusikkuna" #~ msgid "Close the application" #~ msgstr "Sulje sovellus" #~ msgid "File" #~ msgstr "Tiedosto" #~ msgid "Help" #~ msgstr "Apua" #~ msgid "Drag and Drop to change order" #~ msgstr "Raahaa ja pudota muuttaaksesi järjestystä" #~ msgid "Add new" #~ msgstr "Lisää uusi" #~ msgid "Add new item" #~ msgstr "Lisää uusi" #~ msgid "Remove" #~ msgstr "Poista" #~ msgid "Remove selected item" #~ msgstr "Poista valittu kohde" #~ msgid "Move selected item downwards" #~ msgstr "Siirrä alaspäin" #~ msgid "Move selected item upwards" #~ msgstr "Siirrä ylöspäin" #~ msgid "Full font path" #~ msgstr "Koko fontin polku" #~ msgid "Open font file selection dialog" #~ msgstr "Avaa fontin valintaikkuna" #~ msgid "Open file selection dialog" #~ msgstr "Avaa tiedoston valintaikkuna" #~ msgid "Title:" #~ msgstr "Otsikko:" #~ msgid "Open icon file selection dialog" #~ msgstr "Avaa kuvakkeen valintaikkuna" #~ msgid "Restart wbar for saved changes to take effect" #~ msgstr "Käynnistä wbar uudelleen, jotta tallennetut muutokset tulevat voimaan" #~ msgid "Save" #~ msgstr "Tallenna" #~ msgid "Save settings" #~ msgstr "Tallenna asetukset" #~ msgid "Quit, without saving changes." #~ msgstr "Poistu, tallentamatta muutoksia." #~ msgid "Executing: " #~ msgstr "Suoritetaan: " #~ msgid "Restarting: " #~ msgstr "Käynnistetään uudelleen: " #~ msgid "Select image file.." #~ msgstr "Valitse kuvatiedosto..." #~ msgid "All files" #~ msgstr "Kaikki" #~ msgid "Select background image file.." #~ msgstr "Valitse taustakuva.." #~ msgid "' not found..." #~ msgstr "' ei löydö..." #~ msgid "File '" #~ msgstr "Tiedostoa '" #~ msgid "Select command.." #~ msgstr "Valitse komento.." #~ msgid "New item" #~ msgstr "Uusi" #~ msgid "Please, save settings now to have latest configuration." #~ msgstr "Ole hyvä ja tallenna asetukset nyt, jotta viimeisimmät muutokset tulevat voimaan." wbar-2.3.4/po/POTFILES.skip0000644000175000017500000000005312027634570015244 0ustar00sotosoto00000000000000etc/wbar.desktop.in.in etc/wbar.desktop.in wbar-2.3.4/po/LINGUAS0000644000175000017500000000005111667227674014166 0ustar00sotosoto00000000000000# Set of available languages. es de fi wbar-2.3.4/COPYING0000644000175000017500000010451312027635256013554 0ustar00sotosoto00000000000000 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see . The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read . wbar-2.3.4/THANKS0000644000175000017500000000016512027635251013425 0ustar00sotosoto00000000000000Mathias Gumz Federico Gon Rodolfo Granata for the opportunity (yadickson) Ivan Fitenko Lauri Kasanen Markus Koschany wbar-2.3.4/TODO0000644000175000017500000000000012027635251013166 0ustar00sotosoto00000000000000wbar-2.3.4/Makefile.in0000644000175000017500000005547512027635265014602 0ustar00sotosoto00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ THANKS TODO depcomp install-sh missing mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AUTOSTARTDIR = @AUTOSTARTDIR@ AWK = @AWK@ BINDIR = @BINDIR@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFAULT_ARGV = @DEFAULT_ARGV@ DEFAULT_CONFIGDIR = @DEFAULT_CONFIGDIR@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_PACKAGE_DIR = @GLADE_PACKAGE_DIR@ GLADE_PACKAGE_NAME = @GLADE_PACKAGE_NAME@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMELOCALEDIR = @GNOMELOCALEDIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ LDFLAGS = @LDFLAGS@ LIBDIR = @LIBDIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PIDOF_BIN = @PIDOF_BIN@ PIXMAPDIR = @PIXMAPDIR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYSCONFDIR = @SYSCONFDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gui_modules_CFLAGS = @gui_modules_CFLAGS@ gui_modules_LIBS = @gui_modules_LIBS@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ modules_CFLAGS = @modules_CFLAGS@ modules_LIBS = @modules_LIBS@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ CLEANFILES = *~ po/*~ SUBDIRS = src po pixmaps etc share doc EXTRA_DIST = make-conf.sh autogen.sh all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \ grep '^................................................................................................................................................................................................................................................................' 1>&2; then \ echo 'error: the above filenames are too long' 1>&2; \ exit 1; \ else :; fi dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \ distclean distclean-generic distclean-hdr distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: