wmhdplop-0.9.12/ 0000755 0002074 0002074 00000000000 14302112233 010425 5 0000000 0000000 wmhdplop-0.9.12/configure.ac 0000644 0002074 0002074 00000004702 14302112176 012644 0000000 0000000 AC_INIT([wmhdplop], [0.9.12], [wmaker-dev@googlegroups.com])
AC_CONFIG_SRCDIR(wmhdplop.c)
AM_INIT_AUTOMAKE
AC_CONFIG_HEADERS([config.h])
AC_SUBST(VERSION)
ISODATE=`date +%Y-%m-%d`
AC_SUBST(ISODATE)
AC_CANONICAL_HOST
AC_PROG_INSTALL
AC_PROG_CC
AC_DEFINE(ENABLE_HDDTEMP_QUERY,[],[enable queries to hddtemp])
AC_DEFINE(_GNU_SOURCE,[],[uses GNU extensions])
if test x$GCC = xyes; then
CFLAGS="-O3 -fomit-frame-pointer -ffast-math -Wall -W";
fi
dnl check for X
AC_PATH_X
AC_PATH_XTRA
if test x$no_x = xyes; then
echo "You need to supply the path to the X headers and libraries with --x-includes=dir and --x-libraries=dir";
exit 1;
fi;
LIBS="${X_PRE_LIBS} ${X_LIBS} -lX11 -lXext ${LIBS} ${X_EXTRA_LIBS}"
CFLAGS="$CFLAGS $X_CFLAGS"
dnl Checks for library functions.
AC_CHECK_HEADERS(linux/hdreg.h)
PKG_CHECK_MODULES([IMLIB2], [imlib2])
YELLOW="\\033\\1331;33m"
RESET="\\033\\1330m"
dnl Checks for the gkrellm plugin
build_gkhdplop="yes"
AC_ARG_ENABLE(gkrellm,
[ --enable-gkrellm build the gkrellm plugin (requires gtk2 and gkrellm developpement files) (Default is yes)
--disable-gkrellm do not build the gkrellm plugin],
[ if test "x$enableval" = "xno" ; then
build_gkhdplop="no"
echo you disabled the gkhdplop gkrellm plugin
fi
], [build_gkhdplop="yes"])
GKHDPLOP=""
if test "x$build_gkhdplop" = "xno"; then
echo gkhdplop disabled...
else
echo building with GKHDPLOP, checking for gtk2..
pkg_modules="gtk+-2.0 >= 2.0.0"
PKG_CHECK_MODULES(PACKAGE, [$pkg_modules])
GTK2_CFLAGS=$PACKAGE_CFLAGS;
GTK2_LIBS=$PACKAGE_LIBS;
AC_SUBST(GTK2_CFLAGS)
AC_SUBST(GTK2_LIBS)
SAVECPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CFLAGS $GTK2_CFLAGS"
AC_CHECK_HEADERS([gkrellm2/gkrellm.h], [ok=1], [ok=0])
if test "x$ok" = "x0"; then
echo -e "${YELLOW}gkrellm2/gkrellm.h header not found or unusable${RESET}... cannot build gkhdplop.so"
build_gkhdplop="no"
else
GKHDPLOP="gkhdplop.so"
fi
CPPFLAGS="$SAVECPPFLAGS"
fi
AC_SUBST(GKHDPLOP)
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
echo "- - - - - - - - - - - - - - - -"
echo -e "${YELLOW}wmhdplop will be built${RESET}"
if test "x$build_gkhdplop" = "xno"; then
echo -e "${YELLOW}gkhdplop.so will NOT be built${RESET}"
else
echo -e "${YELLOW}gkhdplop.so will be built${RESET}"
echo "Check that the plugin is working properly before installing it with:"
echo " gkrellm -p ./gkhdplop.so"
echo "and then install the gkrellm plugin with:"
echo " mv ./gkhdplop.so ~/.gkrellm2/plugins"
fi
wmhdplop-0.9.12/Makefile.in 0000644 0002074 0002074 00000152267 14302112222 012425 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = wmhdplop$(EXEEXT)
EXTRA_PROGRAMS = gkhdplop.so$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(dist_desktop_DATA) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
"$(DESTDIR)$(desktopdir)"
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am__objects_1 = gkhdplop_so-wmhdplop.$(OBJEXT) \
gkhdplop_so-util.$(OBJEXT) gkhdplop_so-procstat.$(OBJEXT) \
gkhdplop_so-devnames.$(OBJEXT) \
gkhdplop_so-dockapp_imlib2.$(OBJEXT) \
gkhdplop_so-gkrellm_hdplop.$(OBJEXT)
am_gkhdplop_so_OBJECTS = $(am__objects_1)
gkhdplop_so_OBJECTS = $(am_gkhdplop_so_OBJECTS)
am__DEPENDENCIES_1 =
gkhdplop_so_DEPENDENCIES = $(am__DEPENDENCIES_1)
gkhdplop_so_LINK = $(CCLD) $(gkhdplop_so_CFLAGS) $(CFLAGS) \
$(gkhdplop_so_LDFLAGS) $(LDFLAGS) -o $@
am_wmhdplop_OBJECTS = wmhdplop-wmhdplop.$(OBJEXT) \
wmhdplop-util.$(OBJEXT) wmhdplop-procstat.$(OBJEXT) \
wmhdplop-devnames.$(OBJEXT) wmhdplop-dockapp_imlib2.$(OBJEXT)
wmhdplop_OBJECTS = $(am_wmhdplop_OBJECTS)
wmhdplop_DEPENDENCIES = $(am__DEPENDENCIES_1)
wmhdplop_LINK = $(CCLD) $(wmhdplop_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/gkhdplop_so-devnames.Po \
./$(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po \
./$(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po \
./$(DEPDIR)/gkhdplop_so-procstat.Po \
./$(DEPDIR)/gkhdplop_so-util.Po \
./$(DEPDIR)/gkhdplop_so-wmhdplop.Po \
./$(DEPDIR)/wmhdplop-devnames.Po \
./$(DEPDIR)/wmhdplop-dockapp_imlib2.Po \
./$(DEPDIR)/wmhdplop-procstat.Po ./$(DEPDIR)/wmhdplop-util.Po \
./$(DEPDIR)/wmhdplop-wmhdplop.Po
am__mv = mv -f
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(gkhdplop_so_SOURCES) $(wmhdplop_SOURCES)
DIST_SOURCES = $(gkhdplop_so_SOURCES) $(wmhdplop_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(dist_desktop_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
AM_RECURSIVE_TARGETS = cscope
am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
$(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \
README compile config.guess config.sub depcomp install-sh \
missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GKHDPLOP = @GKHDPLOP@
# gtk cflags and gtk lib flags
GTK2_CFLAGS = @GTK2_CFLAGS@
GTK2_LIBS = @GTK2_LIBS@
IMLIB2_CFLAGS = @IMLIB2_CFLAGS@
IMLIB2_LIBS = @IMLIB2_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
ISODATE = @ISODATE@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
PACKAGE_LIBS = @PACKAGE_LIBS@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_PROGRAMS = @GKHDPLOP@
dist_man_MANS = wmhdplop.1
desktopdir = $(datadir)/applications
dist_desktop_DATA = wmhdplop.desktop
EXTRA_DIST = autogen.sh gkrellm_hdplop.c
wmhdplop_SOURCES = wmhdplop.c wmhdplop.h util.c util.h procstat.c procstat.h devnames.c devnames.h global.h dockapp_imlib2.c dockapp_imlib2.h
wmhdplop_LDADD = -lm $(IMLIB2_LIBS)
wmhdplop_CFLAGS = $(IMLIB2_CFLAGS)
LIBTOOLSUX_GKHDPLOP_SRC = wmhdplop.c util.c util.h procstat.c procstat.h devnames.c devnames.h global.h dockapp_imlib2.c dockapp_imlib2.h gkrellm_hdplop.c
gkhdplop_so_SOURCES = $(LIBTOOLSUX_GKHDPLOP_SRC)
gkhdplop_so_CFLAGS = -DGKRELLM -fPIC $(GTK2_CFLAGS) $(IMLIB2_CFLAGS)
gkhdplop_so_LDADD = $(IMLIB2_LIBS) -lm
gkhdplop_so_LDFLAGS = -shared
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
clean-noinstPROGRAMS:
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
gkhdplop.so$(EXEEXT): $(gkhdplop_so_OBJECTS) $(gkhdplop_so_DEPENDENCIES) $(EXTRA_gkhdplop_so_DEPENDENCIES)
@rm -f gkhdplop.so$(EXEEXT)
$(AM_V_CCLD)$(gkhdplop_so_LINK) $(gkhdplop_so_OBJECTS) $(gkhdplop_so_LDADD) $(LIBS)
wmhdplop$(EXEEXT): $(wmhdplop_OBJECTS) $(wmhdplop_DEPENDENCIES) $(EXTRA_wmhdplop_DEPENDENCIES)
@rm -f wmhdplop$(EXEEXT)
$(AM_V_CCLD)$(wmhdplop_LINK) $(wmhdplop_OBJECTS) $(wmhdplop_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-devnames.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-procstat.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-util.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gkhdplop_so-wmhdplop.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wmhdplop-devnames.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wmhdplop-dockapp_imlib2.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wmhdplop-procstat.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wmhdplop-util.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wmhdplop-wmhdplop.Po@am__quote@ # am--include-marker
$(am__depfiles_remade):
@$(MKDIR_P) $(@D)
@echo '# dummy' >$@-t && $(am__mv) $@-t $@
am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
gkhdplop_so-wmhdplop.o: wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-wmhdplop.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-wmhdplop.Tpo -c -o gkhdplop_so-wmhdplop.o `test -f 'wmhdplop.c' || echo '$(srcdir)/'`wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-wmhdplop.Tpo $(DEPDIR)/gkhdplop_so-wmhdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='wmhdplop.c' object='gkhdplop_so-wmhdplop.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-wmhdplop.o `test -f 'wmhdplop.c' || echo '$(srcdir)/'`wmhdplop.c
gkhdplop_so-wmhdplop.obj: wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-wmhdplop.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-wmhdplop.Tpo -c -o gkhdplop_so-wmhdplop.obj `if test -f 'wmhdplop.c'; then $(CYGPATH_W) 'wmhdplop.c'; else $(CYGPATH_W) '$(srcdir)/wmhdplop.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-wmhdplop.Tpo $(DEPDIR)/gkhdplop_so-wmhdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='wmhdplop.c' object='gkhdplop_so-wmhdplop.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-wmhdplop.obj `if test -f 'wmhdplop.c'; then $(CYGPATH_W) 'wmhdplop.c'; else $(CYGPATH_W) '$(srcdir)/wmhdplop.c'; fi`
gkhdplop_so-util.o: util.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-util.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-util.Tpo -c -o gkhdplop_so-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-util.Tpo $(DEPDIR)/gkhdplop_so-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='gkhdplop_so-util.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
gkhdplop_so-util.obj: util.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-util.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-util.Tpo -c -o gkhdplop_so-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-util.Tpo $(DEPDIR)/gkhdplop_so-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='gkhdplop_so-util.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
gkhdplop_so-procstat.o: procstat.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-procstat.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-procstat.Tpo -c -o gkhdplop_so-procstat.o `test -f 'procstat.c' || echo '$(srcdir)/'`procstat.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-procstat.Tpo $(DEPDIR)/gkhdplop_so-procstat.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='procstat.c' object='gkhdplop_so-procstat.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-procstat.o `test -f 'procstat.c' || echo '$(srcdir)/'`procstat.c
gkhdplop_so-procstat.obj: procstat.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-procstat.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-procstat.Tpo -c -o gkhdplop_so-procstat.obj `if test -f 'procstat.c'; then $(CYGPATH_W) 'procstat.c'; else $(CYGPATH_W) '$(srcdir)/procstat.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-procstat.Tpo $(DEPDIR)/gkhdplop_so-procstat.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='procstat.c' object='gkhdplop_so-procstat.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-procstat.obj `if test -f 'procstat.c'; then $(CYGPATH_W) 'procstat.c'; else $(CYGPATH_W) '$(srcdir)/procstat.c'; fi`
gkhdplop_so-devnames.o: devnames.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-devnames.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-devnames.Tpo -c -o gkhdplop_so-devnames.o `test -f 'devnames.c' || echo '$(srcdir)/'`devnames.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-devnames.Tpo $(DEPDIR)/gkhdplop_so-devnames.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='devnames.c' object='gkhdplop_so-devnames.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-devnames.o `test -f 'devnames.c' || echo '$(srcdir)/'`devnames.c
gkhdplop_so-devnames.obj: devnames.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-devnames.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-devnames.Tpo -c -o gkhdplop_so-devnames.obj `if test -f 'devnames.c'; then $(CYGPATH_W) 'devnames.c'; else $(CYGPATH_W) '$(srcdir)/devnames.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-devnames.Tpo $(DEPDIR)/gkhdplop_so-devnames.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='devnames.c' object='gkhdplop_so-devnames.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-devnames.obj `if test -f 'devnames.c'; then $(CYGPATH_W) 'devnames.c'; else $(CYGPATH_W) '$(srcdir)/devnames.c'; fi`
gkhdplop_so-dockapp_imlib2.o: dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-dockapp_imlib2.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Tpo -c -o gkhdplop_so-dockapp_imlib2.o `test -f 'dockapp_imlib2.c' || echo '$(srcdir)/'`dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Tpo $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dockapp_imlib2.c' object='gkhdplop_so-dockapp_imlib2.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-dockapp_imlib2.o `test -f 'dockapp_imlib2.c' || echo '$(srcdir)/'`dockapp_imlib2.c
gkhdplop_so-dockapp_imlib2.obj: dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-dockapp_imlib2.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Tpo -c -o gkhdplop_so-dockapp_imlib2.obj `if test -f 'dockapp_imlib2.c'; then $(CYGPATH_W) 'dockapp_imlib2.c'; else $(CYGPATH_W) '$(srcdir)/dockapp_imlib2.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Tpo $(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dockapp_imlib2.c' object='gkhdplop_so-dockapp_imlib2.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-dockapp_imlib2.obj `if test -f 'dockapp_imlib2.c'; then $(CYGPATH_W) 'dockapp_imlib2.c'; else $(CYGPATH_W) '$(srcdir)/dockapp_imlib2.c'; fi`
gkhdplop_so-gkrellm_hdplop.o: gkrellm_hdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-gkrellm_hdplop.o -MD -MP -MF $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Tpo -c -o gkhdplop_so-gkrellm_hdplop.o `test -f 'gkrellm_hdplop.c' || echo '$(srcdir)/'`gkrellm_hdplop.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Tpo $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='gkrellm_hdplop.c' object='gkhdplop_so-gkrellm_hdplop.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-gkrellm_hdplop.o `test -f 'gkrellm_hdplop.c' || echo '$(srcdir)/'`gkrellm_hdplop.c
gkhdplop_so-gkrellm_hdplop.obj: gkrellm_hdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -MT gkhdplop_so-gkrellm_hdplop.obj -MD -MP -MF $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Tpo -c -o gkhdplop_so-gkrellm_hdplop.obj `if test -f 'gkrellm_hdplop.c'; then $(CYGPATH_W) 'gkrellm_hdplop.c'; else $(CYGPATH_W) '$(srcdir)/gkrellm_hdplop.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Tpo $(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='gkrellm_hdplop.c' object='gkhdplop_so-gkrellm_hdplop.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gkhdplop_so_CFLAGS) $(CFLAGS) -c -o gkhdplop_so-gkrellm_hdplop.obj `if test -f 'gkrellm_hdplop.c'; then $(CYGPATH_W) 'gkrellm_hdplop.c'; else $(CYGPATH_W) '$(srcdir)/gkrellm_hdplop.c'; fi`
wmhdplop-wmhdplop.o: wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-wmhdplop.o -MD -MP -MF $(DEPDIR)/wmhdplop-wmhdplop.Tpo -c -o wmhdplop-wmhdplop.o `test -f 'wmhdplop.c' || echo '$(srcdir)/'`wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-wmhdplop.Tpo $(DEPDIR)/wmhdplop-wmhdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='wmhdplop.c' object='wmhdplop-wmhdplop.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-wmhdplop.o `test -f 'wmhdplop.c' || echo '$(srcdir)/'`wmhdplop.c
wmhdplop-wmhdplop.obj: wmhdplop.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-wmhdplop.obj -MD -MP -MF $(DEPDIR)/wmhdplop-wmhdplop.Tpo -c -o wmhdplop-wmhdplop.obj `if test -f 'wmhdplop.c'; then $(CYGPATH_W) 'wmhdplop.c'; else $(CYGPATH_W) '$(srcdir)/wmhdplop.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-wmhdplop.Tpo $(DEPDIR)/wmhdplop-wmhdplop.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='wmhdplop.c' object='wmhdplop-wmhdplop.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-wmhdplop.obj `if test -f 'wmhdplop.c'; then $(CYGPATH_W) 'wmhdplop.c'; else $(CYGPATH_W) '$(srcdir)/wmhdplop.c'; fi`
wmhdplop-util.o: util.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-util.o -MD -MP -MF $(DEPDIR)/wmhdplop-util.Tpo -c -o wmhdplop-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-util.Tpo $(DEPDIR)/wmhdplop-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='wmhdplop-util.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
wmhdplop-util.obj: util.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-util.obj -MD -MP -MF $(DEPDIR)/wmhdplop-util.Tpo -c -o wmhdplop-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-util.Tpo $(DEPDIR)/wmhdplop-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='wmhdplop-util.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
wmhdplop-procstat.o: procstat.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-procstat.o -MD -MP -MF $(DEPDIR)/wmhdplop-procstat.Tpo -c -o wmhdplop-procstat.o `test -f 'procstat.c' || echo '$(srcdir)/'`procstat.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-procstat.Tpo $(DEPDIR)/wmhdplop-procstat.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='procstat.c' object='wmhdplop-procstat.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-procstat.o `test -f 'procstat.c' || echo '$(srcdir)/'`procstat.c
wmhdplop-procstat.obj: procstat.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-procstat.obj -MD -MP -MF $(DEPDIR)/wmhdplop-procstat.Tpo -c -o wmhdplop-procstat.obj `if test -f 'procstat.c'; then $(CYGPATH_W) 'procstat.c'; else $(CYGPATH_W) '$(srcdir)/procstat.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-procstat.Tpo $(DEPDIR)/wmhdplop-procstat.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='procstat.c' object='wmhdplop-procstat.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-procstat.obj `if test -f 'procstat.c'; then $(CYGPATH_W) 'procstat.c'; else $(CYGPATH_W) '$(srcdir)/procstat.c'; fi`
wmhdplop-devnames.o: devnames.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-devnames.o -MD -MP -MF $(DEPDIR)/wmhdplop-devnames.Tpo -c -o wmhdplop-devnames.o `test -f 'devnames.c' || echo '$(srcdir)/'`devnames.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-devnames.Tpo $(DEPDIR)/wmhdplop-devnames.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='devnames.c' object='wmhdplop-devnames.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-devnames.o `test -f 'devnames.c' || echo '$(srcdir)/'`devnames.c
wmhdplop-devnames.obj: devnames.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-devnames.obj -MD -MP -MF $(DEPDIR)/wmhdplop-devnames.Tpo -c -o wmhdplop-devnames.obj `if test -f 'devnames.c'; then $(CYGPATH_W) 'devnames.c'; else $(CYGPATH_W) '$(srcdir)/devnames.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-devnames.Tpo $(DEPDIR)/wmhdplop-devnames.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='devnames.c' object='wmhdplop-devnames.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-devnames.obj `if test -f 'devnames.c'; then $(CYGPATH_W) 'devnames.c'; else $(CYGPATH_W) '$(srcdir)/devnames.c'; fi`
wmhdplop-dockapp_imlib2.o: dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-dockapp_imlib2.o -MD -MP -MF $(DEPDIR)/wmhdplop-dockapp_imlib2.Tpo -c -o wmhdplop-dockapp_imlib2.o `test -f 'dockapp_imlib2.c' || echo '$(srcdir)/'`dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-dockapp_imlib2.Tpo $(DEPDIR)/wmhdplop-dockapp_imlib2.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dockapp_imlib2.c' object='wmhdplop-dockapp_imlib2.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-dockapp_imlib2.o `test -f 'dockapp_imlib2.c' || echo '$(srcdir)/'`dockapp_imlib2.c
wmhdplop-dockapp_imlib2.obj: dockapp_imlib2.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -MT wmhdplop-dockapp_imlib2.obj -MD -MP -MF $(DEPDIR)/wmhdplop-dockapp_imlib2.Tpo -c -o wmhdplop-dockapp_imlib2.obj `if test -f 'dockapp_imlib2.c'; then $(CYGPATH_W) 'dockapp_imlib2.c'; else $(CYGPATH_W) '$(srcdir)/dockapp_imlib2.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/wmhdplop-dockapp_imlib2.Tpo $(DEPDIR)/wmhdplop-dockapp_imlib2.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dockapp_imlib2.c' object='wmhdplop-dockapp_imlib2.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(wmhdplop_CFLAGS) $(CFLAGS) -c -o wmhdplop-dockapp_imlib2.obj `if test -f 'dockapp_imlib2.c'; then $(CYGPATH_W) 'dockapp_imlib2.c'; else $(CYGPATH_W) '$(srcdir)/dockapp_imlib2.c'; fi`
install-man1: $(dist_man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(dist_man_MANS)'; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-dist_desktopDATA: $(dist_desktop_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_desktop_DATA)'; test -n "$(desktopdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
done
uninstall-dist_desktopDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_desktop_DATA)'; test -n "$(desktopdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h
installdirs:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(desktopdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f ./$(DEPDIR)/gkhdplop_so-devnames.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-procstat.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-util.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-wmhdplop.Po
-rm -f ./$(DEPDIR)/wmhdplop-devnames.Po
-rm -f ./$(DEPDIR)/wmhdplop-dockapp_imlib2.Po
-rm -f ./$(DEPDIR)/wmhdplop-procstat.Po
-rm -f ./$(DEPDIR)/wmhdplop-util.Po
-rm -f ./$(DEPDIR)/wmhdplop-wmhdplop.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-dist_desktopDATA install-man
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-binPROGRAMS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f ./$(DEPDIR)/gkhdplop_so-devnames.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-dockapp_imlib2.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-gkrellm_hdplop.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-procstat.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-util.Po
-rm -f ./$(DEPDIR)/gkhdplop_so-wmhdplop.Po
-rm -f ./$(DEPDIR)/wmhdplop-devnames.Po
-rm -f ./$(DEPDIR)/wmhdplop-dockapp_imlib2.Po
-rm -f ./$(DEPDIR)/wmhdplop-procstat.Po
-rm -f ./$(DEPDIR)/wmhdplop-util.Po
-rm -f ./$(DEPDIR)/wmhdplop-wmhdplop.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-dist_desktopDATA \
uninstall-man
uninstall-man: uninstall-man1
.MAKE: all install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \
check-am clean clean-binPROGRAMS clean-cscope clean-generic \
clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip dist-zstd distcheck distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binPROGRAMS install-data install-data-am \
install-dist_desktopDATA install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-man1 \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
uninstall-dist_desktopDATA uninstall-man uninstall-man1
.PRECIOUS: Makefile
all: @GKHDPLOP@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
wmhdplop-0.9.12/config.guess 0000755 0002074 0002074 00000140512 14302112222 012666 0000000 0000000 #! /bin/sh
# Attempt to guess a canonical system name.
# Copyright 1992-2022 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2022-01-09'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
#
# Please send patches to .
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system \`$me' is run on.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
Copyright 1992-2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
* )
break ;;
esac
done
if test $# != 0; then
echo "$me: too many arguments$help" >&2
exit 1
fi
# Just in case it came from the environment.
GUESS=
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
tmp=
# shellcheck disable=SC2172
trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
set_cc_for_build() {
# prevent multiple calls if $tmp is already set
test "$tmp" && return 0
: "${TMPDIR=/tmp}"
# shellcheck disable=SC2039,SC3028
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
for driver in cc gcc c89 c99 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD=$driver
break
fi
done
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac
}
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if test -f /.attbin/uname ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case $UNAME_SYSTEM in
Linux|GNU|GNU/*)
LIBC=unknown
set_cc_for_build
cat <<-EOF > "$dummy.c"
#include
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#elif defined(__GLIBC__)
LIBC=gnu
#else
#include
/* First heuristic to detect musl libc. */
#ifdef __DEFINED_va_list
LIBC=musl
#endif
#endif
EOF
cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
eval "$cc_set_libc"
# Second heuristic to detect musl libc.
if [ "$LIBC" = unknown ] &&
command -v ldd >/dev/null &&
ldd --version 2>&1 | grep -q ^musl; then
LIBC=musl
fi
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
if [ "$LIBC" = unknown ]; then
LIBC=gnu
fi
;;
esac
# Note: order is significant - the case branches are not exclusive.
case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
#
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
/usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
echo unknown)`
case $UNAME_MACHINE_ARCH in
aarch64eb) machine=aarch64_be-unknown ;;
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
earmv*)
arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
machine=${arch}${endian}-unknown
;;
*) machine=$UNAME_MACHINE_ARCH-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently (or will in the future) and ABI.
case $UNAME_MACHINE_ARCH in
earm*)
os=netbsdelf
;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
;;
*)
os=netbsd
;;
esac
# Determine ABI tags.
case $UNAME_MACHINE_ARCH in
earm*)
expr='s/^earmv[0-9]/-eabi/;s/eb$//'
abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
;;
esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
case $UNAME_VERSION in
Debian*)
release='-gnu'
;;
*)
release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
GUESS=$machine-${os}${release}${abi-}
;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE
;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE
;;
*:SecBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE
;;
*:LibertyBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE
;;
*:MidnightBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE
;;
*:ekkoBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE
;;
*:SolidBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE
;;
*:OS108:*:*)
GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE
;;
macppc:MirBSD:*:*)
GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE
;;
*:MirBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE
;;
*:Sortix:*:*)
GUESS=$UNAME_MACHINE-unknown-sortix
;;
*:Twizzler:*:*)
GUESS=$UNAME_MACHINE-unknown-twizzler
;;
*:Redox:*:*)
GUESS=$UNAME_MACHINE-unknown-redox
;;
mips:OSF1:*.*)
GUESS=mips-dec-osf1
;;
alpha:OSF1:*:*)
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
trap '' 0
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
# types through head -n 1, so we only detect the type of CPU 0.
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case $ALPHA_CPU_TYPE in
"EV4 (21064)")
UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
UNAME_MACHINE=alpha ;;
"EV5 (21164)")
UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
GUESS=$UNAME_MACHINE-dec-osf$OSF_REL
;;
Amiga*:UNIX_System_V:4.0:*)
GUESS=m68k-unknown-sysv4
;;
*:[Aa]miga[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-amigaos
;;
*:[Mm]orph[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-morphos
;;
*:OS/390:*:*)
GUESS=i370-ibm-openedition
;;
*:z/VM:*:*)
GUESS=s390-ibm-zvmoe
;;
*:OS400:*:*)
GUESS=powerpc-ibm-os400
;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
GUESS=arm-acorn-riscix$UNAME_RELEASE
;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
GUESS=arm-unknown-riscos
;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
GUESS=hppa1.1-hitachi-hiuxmpp
;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
case `(/bin/universe) 2>/dev/null` in
att) GUESS=pyramid-pyramid-sysv3 ;;
*) GUESS=pyramid-pyramid-bsd ;;
esac
;;
NILE*:*:*:dcosx)
GUESS=pyramid-pyramid-svr4
;;
DRS?6000:unix:4.0:6*)
GUESS=sparc-icl-nx6
;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) GUESS=sparc-icl-nx7 ;;
esac
;;
s390x:SunOS:*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL
;;
sun4H:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-hal-solaris2$SUN_REL
;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris2$SUN_REL
;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
GUESS=i386-pc-auroraux$UNAME_RELEASE
;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
set_cc_for_build
SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
SUN_ARCH=x86_64
fi
fi
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$SUN_ARCH-pc-solaris2$SUN_REL
;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris3$SUN_REL
;;
sun4*:SunOS:*:*)
case `/usr/bin/arch -k` in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'`
GUESS=sparc-sun-sunos$SUN_REL
;;
sun3*:SunOS:*:*)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case `/bin/arch` in
sun3)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun4)
GUESS=sparc-sun-sunos$UNAME_RELEASE
;;
esac
;;
aushp:SunOS:*:*)
GUESS=sparc-auspex-sunos$UNAME_RELEASE
;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
GUESS=m68k-milan-mint$UNAME_RELEASE
;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
GUESS=m68k-hades-mint$UNAME_RELEASE
;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
GUESS=m68k-unknown-mint$UNAME_RELEASE
;;
m68k:machten:*:*)
GUESS=m68k-apple-machten$UNAME_RELEASE
;;
powerpc:machten:*:*)
GUESS=powerpc-apple-machten$UNAME_RELEASE
;;
RISC*:Mach:*:*)
GUESS=mips-dec-mach_bsd4.3
;;
RISC*:ULTRIX:*:*)
GUESS=mips-dec-ultrix$UNAME_RELEASE
;;
VAX*:ULTRIX*:*:*)
GUESS=vax-dec-ultrix$UNAME_RELEASE
;;
2020:CLIX:*:* | 2430:CLIX:*:*)
GUESS=clipper-intergraph-clix$UNAME_RELEASE
;;
mips:*:*:UMIPS | mips:*:*:RISCos)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=mips-mips-riscos$UNAME_RELEASE
;;
Motorola:PowerMAX_OS:*:*)
GUESS=powerpc-motorola-powermax
;;
Motorola:*:4.3:PL8-*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:Power_UNIX:*:*)
GUESS=powerpc-harris-powerunix
;;
m88k:CX/UX:7*:*)
GUESS=m88k-harris-cxux7
;;
m88k:*:4*:R4*)
GUESS=m88k-motorola-sysv4
;;
m88k:*:3*:R3*)
GUESS=m88k-motorola-sysv3
;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
then
if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
test "$TARGET_BINARY_INTERFACE"x = x
then
GUESS=m88k-dg-dgux$UNAME_RELEASE
else
GUESS=m88k-dg-dguxbcs$UNAME_RELEASE
fi
else
GUESS=i586-dg-dgux$UNAME_RELEASE
fi
;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
GUESS=m88k-dolphin-sysv3
;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
GUESS=m88k-motorola-sysv3
;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
GUESS=m88k-tektronix-sysv3
;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
GUESS=m68k-tektronix-bsd
;;
*:IRIX*:*:*)
IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'`
GUESS=mips-sgi-irix$IRIX_REL
;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id
;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
GUESS=i386-ibm-aix
;;
ia64:AIX:*:*)
if test -x /usr/bin/oslevel ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV
;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
GUESS=$SYSTEM_NAME
else
GUESS=rs6000-ibm-aix3.2.5
fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
GUESS=rs6000-ibm-aix3.2.4
else
GUESS=rs6000-ibm-aix3.2
fi
;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if test -x /usr/bin/lslpp ; then
IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \
awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$IBM_ARCH-ibm-aix$IBM_REV
;;
*:AIX:*:*)
GUESS=rs6000-ibm-aix
;;
ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
GUESS=romp-ibm-bsd4.4
;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to
;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
GUESS=rs6000-bull-bosx
;;
DPX/2?00:B.O.S.:*:*)
GUESS=m68k-bull-sysv3
;;
9000/[34]??:4.3bsd:1.*:*)
GUESS=m68k-hp-bsd
;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
GUESS=m68k-hp-bsd4.4
;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
case $UNAME_MACHINE in
9000/31?) HP_ARCH=m68000 ;;
9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if test -x /usr/bin/getconf; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case $sc_cpu_version in
523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case $sc_kernel_bits in
32) HP_ARCH=hppa2.0n ;;
64) HP_ARCH=hppa2.0w ;;
'') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
if test "$HP_ARCH" = ""; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include
#include
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
if test "$HP_ARCH" = hppa2.0w
then
set_cc_for_build
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
# generating 64-bit code. GNU and HP use different nomenclature:
#
# $ CC_FOR_BUILD=cc ./config.guess
# => hppa2.0w-hp-hpux11.23
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
HP_ARCH=hppa2.0w
else
HP_ARCH=hppa64
fi
fi
GUESS=$HP_ARCH-hp-hpux$HPUX_REV
;;
ia64:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
GUESS=ia64-hp-hpux$HPUX_REV
;;
3050*:HI-UX:*:*)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=unknown-hitachi-hiuxwe2
;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
GUESS=hppa1.1-hp-bsd
;;
9000/8??:4.3bsd:*:*)
GUESS=hppa1.0-hp-bsd
;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
GUESS=hppa1.0-hp-mpeix
;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
GUESS=hppa1.1-hp-osf
;;
hp8??:OSF1:*:*)
GUESS=hppa1.0-hp-osf
;;
i*86:OSF1:*:*)
if test -x /usr/sbin/sysversion ; then
GUESS=$UNAME_MACHINE-unknown-osf1mk
else
GUESS=$UNAME_MACHINE-unknown-osf1
fi
;;
parisc*:Lites*:*:*)
GUESS=hppa1.1-hp-lites
;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
GUESS=c1-convex-bsd
;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
GUESS=c34-convex-bsd
;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
GUESS=c38-convex-bsd
;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
GUESS=c4-convex-bsd
;;
CRAY*Y-MP:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=ymp-cray-unicos$CRAY_REL
;;
CRAY*[A-Z]90:*:*:*)
echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=t90-cray-unicos$CRAY_REL
;;
CRAY*T3E:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=alphaev5-cray-unicosmk$CRAY_REL
;;
CRAY*SV1:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=sv1-cray-unicos$CRAY_REL
;;
*:UNICOS/mp:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=craynv-cray-unicosmp$CRAY_REL
;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE
;;
sparc*:BSD/OS:*:*)
GUESS=sparc-unknown-bsdi$UNAME_RELEASE
;;
*:BSD/OS:*:*)
GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE
;;
arm:FreeBSD:*:*)
UNAME_PROCESSOR=`uname -p`
set_cc_for_build
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi
else
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf
fi
;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`/usr/bin/uname -p`
case $UNAME_PROCESSOR in
amd64)
UNAME_PROCESSOR=x86_64 ;;
i386)
UNAME_PROCESSOR=i586 ;;
esac
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL
;;
i*:CYGWIN*:*)
GUESS=$UNAME_MACHINE-pc-cygwin
;;
*:MINGW64*:*)
GUESS=$UNAME_MACHINE-pc-mingw64
;;
*:MINGW*:*)
GUESS=$UNAME_MACHINE-pc-mingw32
;;
*:MSYS*:*)
GUESS=$UNAME_MACHINE-pc-msys
;;
i*:PW*:*)
GUESS=$UNAME_MACHINE-pc-pw32
;;
*:SerenityOS:*:*)
GUESS=$UNAME_MACHINE-pc-serenity
;;
*:Interix*:*)
case $UNAME_MACHINE in
x86)
GUESS=i586-pc-interix$UNAME_RELEASE
;;
authenticamd | genuineintel | EM64T)
GUESS=x86_64-unknown-interix$UNAME_RELEASE
;;
IA64)
GUESS=ia64-unknown-interix$UNAME_RELEASE
;;
esac ;;
i*:UWIN*:*)
GUESS=$UNAME_MACHINE-pc-uwin
;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
GUESS=x86_64-pc-cygwin
;;
prep*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=powerpcle-unknown-solaris2$SUN_REL
;;
*:GNU:*:*)
# the GNU system
GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'`
GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL
;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
;;
*:Minix:*:*)
GUESS=$UNAME_MACHINE-unknown-minix
;;
aarch64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
EV5) UNAME_MACHINE=alphaev5 ;;
EV56) UNAME_MACHINE=alphaev56 ;;
PCA56) UNAME_MACHINE=alphapca56 ;;
PCA57) UNAME_MACHINE=alphapca56 ;;
EV6) UNAME_MACHINE=alphaev6 ;;
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arm*:Linux:*:*)
set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi
else
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf
fi
fi
;;
avr32*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
cris:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
crisv32:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
e2k:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
frv:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
hexagon:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:Linux:*:*)
GUESS=$UNAME_MACHINE-pc-linux-$LIBC
;;
ia64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
k1om:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m32r*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m68*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
mips:Linux:*:* | mips64:Linux:*:*)
set_cc_for_build
IS_GLIBC=0
test x"${LIBC}" = xgnu && IS_GLIBC=1
sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef mips
#undef mipsel
#undef mips64
#undef mips64el
#if ${IS_GLIBC} && defined(_ABI64)
LIBCABI=gnuabi64
#else
#if ${IS_GLIBC} && defined(_ABIN32)
LIBCABI=gnuabin32
#else
LIBCABI=${LIBC}
#endif
#endif
#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa64r6
#else
#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa32r6
#else
#if defined(__mips64)
CPU=mips64
#else
CPU=mips
#endif
#endif
#endif
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
MIPS_ENDIAN=el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
MIPS_ENDIAN=
#else
MIPS_ENDIAN=
#endif
#endif
EOF
cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`
eval "$cc_set_vars"
test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
;;
mips64el:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
openrisc*:Linux:*:*)
GUESS=or1k-unknown-linux-$LIBC
;;
or32:Linux:*:* | or1k*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
padre:Linux:*:*)
GUESS=sparc-unknown-linux-$LIBC
;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
GUESS=hppa64-unknown-linux-$LIBC
;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;;
PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;;
*) GUESS=hppa-unknown-linux-$LIBC ;;
esac
;;
ppc64:Linux:*:*)
GUESS=powerpc64-unknown-linux-$LIBC
;;
ppc:Linux:*:*)
GUESS=powerpc-unknown-linux-$LIBC
;;
ppc64le:Linux:*:*)
GUESS=powerpc64le-unknown-linux-$LIBC
;;
ppcle:Linux:*:*)
GUESS=powerpcle-unknown-linux-$LIBC
;;
riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
s390:Linux:*:* | s390x:Linux:*:*)
GUESS=$UNAME_MACHINE-ibm-linux-$LIBC
;;
sh64*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sh*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sparc:Linux:*:* | sparc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
tile*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
vax:Linux:*:*)
GUESS=$UNAME_MACHINE-dec-linux-$LIBC
;;
x86_64:Linux:*:*)
set_cc_for_build
LIBCABI=$LIBC
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_X32 >/dev/null
then
LIBCABI=${LIBC}x32
fi
fi
GUESS=$UNAME_MACHINE-pc-linux-$LIBCABI
;;
xtensa*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
GUESS=i386-sequent-sysv4
;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION
;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
GUESS=$UNAME_MACHINE-pc-os2-emx
;;
i*86:XTS-300:*:STOP)
GUESS=$UNAME_MACHINE-unknown-stop
;;
i*86:atheos:*:*)
GUESS=$UNAME_MACHINE-unknown-atheos
;;
i*86:syllable:*:*)
GUESS=$UNAME_MACHINE-pc-syllable
;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
GUESS=i386-unknown-lynxos$UNAME_RELEASE
;;
i*86:*DOS:*:*)
GUESS=$UNAME_MACHINE-pc-msdosdjgpp
;;
i*86:*:4.*:*)
UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL
fi
;;
i*86:*:5:[678]*)
# UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv32
fi
;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
# prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
GUESS=i586-pc-msdosdjgpp
;;
Intel:Mach:3*:*)
GUESS=i386-pc-mach3
;;
paragon:*:*:*)
GUESS=i860-intel-osf1
;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4
fi
;;
mini*:CTIX:SYS*5:*)
# "miniframe"
GUESS=m68010-convergent-sysv
;;
mc68k:UNIX:SYSTEM5:3.51m)
GUESS=m68k-convergent-sysv
;;
M680?0:D-NIX:5.3:*)
GUESS=m68k-diab-dnix
;;
M68*:*:R3V[5678]*:*)
test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
NCR*:*:4.2:* | MPRAS*:*:4.2:*)
OS_REL='.3'
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
GUESS=m68k-unknown-lynxos$UNAME_RELEASE
;;
mc68030:UNIX_System_V:4.*:*)
GUESS=m68k-atari-sysv4
;;
TSUNAMI:LynxOS:2.*:*)
GUESS=sparc-unknown-lynxos$UNAME_RELEASE
;;
rs6000:LynxOS:2.*:*)
GUESS=rs6000-unknown-lynxos$UNAME_RELEASE
;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
GUESS=powerpc-unknown-lynxos$UNAME_RELEASE
;;
SM[BE]S:UNIX_SV:*:*)
GUESS=mips-dde-sysv$UNAME_RELEASE
;;
RM*:ReliantUNIX-*:*:*)
GUESS=mips-sni-sysv4
;;
RM*:SINIX-*:*:*)
GUESS=mips-sni-sysv4
;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
GUESS=$UNAME_MACHINE-sni-sysv4
else
GUESS=ns32k-sni-sysv
fi
;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says
GUESS=i586-unisys-sysv4
;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes .
# How about differentiating between stratus architectures? -djm
GUESS=hppa1.1-stratus-sysv4
;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
GUESS=i860-stratus-sysv4
;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=$UNAME_MACHINE-stratus-vos
;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=hppa1.1-stratus-vos
;;
mc68*:A/UX:*:*)
GUESS=m68k-apple-aux$UNAME_RELEASE
;;
news*:NEWS-OS:6*:*)
GUESS=mips-sony-newsos6
;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if test -d /usr/nec; then
GUESS=mips-nec-sysv$UNAME_RELEASE
else
GUESS=mips-unknown-sysv$UNAME_RELEASE
fi
;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
GUESS=powerpc-be-beos
;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
GUESS=powerpc-apple-beos
;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
GUESS=i586-pc-beos
;;
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
GUESS=i586-pc-haiku
;;
x86_64:Haiku:*:*)
GUESS=x86_64-unknown-haiku
;;
SX-4:SUPER-UX:*:*)
GUESS=sx4-nec-superux$UNAME_RELEASE
;;
SX-5:SUPER-UX:*:*)
GUESS=sx5-nec-superux$UNAME_RELEASE
;;
SX-6:SUPER-UX:*:*)
GUESS=sx6-nec-superux$UNAME_RELEASE
;;
SX-7:SUPER-UX:*:*)
GUESS=sx7-nec-superux$UNAME_RELEASE
;;
SX-8:SUPER-UX:*:*)
GUESS=sx8-nec-superux$UNAME_RELEASE
;;
SX-8R:SUPER-UX:*:*)
GUESS=sx8r-nec-superux$UNAME_RELEASE
;;
SX-ACE:SUPER-UX:*:*)
GUESS=sxace-nec-superux$UNAME_RELEASE
;;
Power*:Rhapsody:*:*)
GUESS=powerpc-apple-rhapsody$UNAME_RELEASE
;;
*:Rhapsody:*:*)
GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE
;;
arm64:Darwin:*:*)
GUESS=aarch64-apple-darwin$UNAME_RELEASE
;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p`
case $UNAME_PROCESSOR in
unknown) UNAME_PROCESSOR=powerpc ;;
esac
if command -v xcode-select > /dev/null 2> /dev/null && \
! xcode-select --print-path > /dev/null 2> /dev/null ; then
# Avoid executing cc if there is no toolchain installed as
# cc will be a stub that puts up a graphical alert
# prompting the user to install developer tools.
CC_FOR_BUILD=no_compiler_found
else
set_cc_for_build
fi
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
case $UNAME_PROCESSOR in
i386) UNAME_PROCESSOR=x86_64 ;;
powerpc) UNAME_PROCESSOR=powerpc64 ;;
esac
fi
# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_PPC >/dev/null
then
UNAME_PROCESSOR=powerpc
fi
elif test "$UNAME_PROCESSOR" = i386 ; then
# uname -m returns i386 or x86_64
UNAME_PROCESSOR=$UNAME_MACHINE
fi
GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE
;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE
;;
*:QNX:*:4*)
GUESS=i386-pc-qnx
;;
NEO-*:NONSTOP_KERNEL:*:*)
GUESS=neo-tandem-nsk$UNAME_RELEASE
;;
NSE-*:NONSTOP_KERNEL:*:*)
GUESS=nse-tandem-nsk$UNAME_RELEASE
;;
NSR-*:NONSTOP_KERNEL:*:*)
GUESS=nsr-tandem-nsk$UNAME_RELEASE
;;
NSV-*:NONSTOP_KERNEL:*:*)
GUESS=nsv-tandem-nsk$UNAME_RELEASE
;;
NSX-*:NONSTOP_KERNEL:*:*)
GUESS=nsx-tandem-nsk$UNAME_RELEASE
;;
*:NonStop-UX:*:*)
GUESS=mips-compaq-nonstopux
;;
BS2000:POSIX*:*:*)
GUESS=bs2000-siemens-sysv
;;
DS/*:UNIX_System_V:*:*)
GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE
;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
if test "${cputype-}" = 386; then
UNAME_MACHINE=i386
elif test "x${cputype-}" != x; then
UNAME_MACHINE=$cputype
fi
GUESS=$UNAME_MACHINE-unknown-plan9
;;
*:TOPS-10:*:*)
GUESS=pdp10-unknown-tops10
;;
*:TENEX:*:*)
GUESS=pdp10-unknown-tenex
;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
GUESS=pdp10-dec-tops20
;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
GUESS=pdp10-xkl-tops20
;;
*:TOPS-20:*:*)
GUESS=pdp10-unknown-tops20
;;
*:ITS:*:*)
GUESS=pdp10-unknown-its
;;
SEI:*:*:SEIUX)
GUESS=mips-sei-seiux$UNAME_RELEASE
;;
*:DragonFly:*:*)
DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL
;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case $UNAME_MACHINE in
A*) GUESS=alpha-dec-vms ;;
I*) GUESS=ia64-dec-vms ;;
V*) GUESS=vax-dec-vms ;;
esac ;;
*:XENIX:*:SysV)
GUESS=i386-pc-xenix
;;
i*86:skyos:*:*)
SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`
GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL
;;
i*86:rdos:*:*)
GUESS=$UNAME_MACHINE-pc-rdos
;;
i*86:Fiwix:*:*)
GUESS=$UNAME_MACHINE-pc-fiwix
;;
*:AROS:*:*)
GUESS=$UNAME_MACHINE-unknown-aros
;;
x86_64:VMkernel:*:*)
GUESS=$UNAME_MACHINE-unknown-esx
;;
amd64:Isilon\ OneFS:*:*)
GUESS=x86_64-unknown-onefs
;;
*:Unleashed:*:*)
GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
;;
esac
# Do we have a guess based on uname results?
if test "x$GUESS" != x; then
echo "$GUESS"
exit
fi
# No uname command or uname output not recognized.
set_cc_for_build
cat > "$dummy.c" <
#include
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#include
#if defined(_SIZE_T_) || defined(SIGLOST)
#include
#endif
#endif
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
#include
#if defined (BSD)
#if BSD == 43
printf ("vax-dec-bsd4.3\n"); exit (0);
#else
#if BSD == 199006
printf ("vax-dec-bsd4.3reno\n"); exit (0);
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#endif
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#else
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname un;
uname (&un);
printf ("vax-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname *un;
uname (&un);
printf ("mips-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("mips-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
echo "$0: unable to guess system type" >&2
case $UNAME_MACHINE:$UNAME_SYSTEM in
mips:Linux | mips64:Linux)
# If we got here on MIPS GNU/Linux, output extra information.
cat >&2 <&2 <&2 </dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
hostinfo = `(hostinfo) 2>/dev/null`
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
UNAME_MACHINE = "$UNAME_MACHINE"
UNAME_RELEASE = "$UNAME_RELEASE"
UNAME_SYSTEM = "$UNAME_SYSTEM"
UNAME_VERSION = "$UNAME_VERSION"
EOF
fi
exit 1
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
wmhdplop-0.9.12/ChangeLog 0000644 0002074 0002074 00000005241 14302112176 012127 0000000 0000000 2022-08-25 (v0.9.12)
Autotools updates.
Add .gitignore.
2018-12-10 (v0.9.11)
Include sys/sysmacros.h for major/minor funcs.
Fix integer overflow.
Remove trailing whitespace.
2016-11-24 (v0.9.10)
Now maintained by the Window Maker Team.
Add desktop entry file.
Add manpage from Debian.
Support NVME devices
Fix compiler warnings.
Modernize autotools.
Find disk device after /run transition
Change gkhdplop_so_LDFLAGS to gkhdplop_so_LDADD in Makefile
Fix GCC 4.7 FTBFS. -Wl needs to have values passed to it so that it can
pass those on to the linker.
2007-04-20 (v0.9.9)
Fixed device lookup from /proc/partitions & /etc/mtab on feisty fawn.
2006-12-01 (v0.9.8)
Added option -F to display hd temperatures in Farenheit degrees
instead of Celsius.
Added support for up to 12 ide hd.
Fixed font paths & default font (imlib is buggy with FreeSansBold)
2005-06-17 (v0.9.7)
Should tolerate swapless configurations.
2005-02-25
Damned there was a leak in both wmforkplop and wmhdplop.
2004-14-07 (v0.9.6)
Small reduction of CPU consumption, and fixed a bug in gkhdplop
which was under-estimating the throughtput.
Added options --32, --48 and --56 for user whose dock is smaller
than 64x64.
2004-07-07 (v0.9.5)
Some small bugfixes, added /usr/X11R6/lib/X11/fonts/truetype to
default font path, wmhdplop will try harder to find a
font. gkhdplop won't kill gkrellm if not font is found. wmhdplop
should work out of box with fvwm2 and others windowmanagers.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=257760 should be
fixed, and the font names/size can now be changed in the gkhdplop
panel.
2004-04-06 (v0.9.4)
Well well well, wmhdplop won't try anymore to parse device
names. Major & minor device number are the only truth. Forget the
brain-damaged 0.9.3 which was broken with devfs.
2004-04-06 (v0.9.3)
Fixed some crashes, and wrong throughput when partitions where
monitored. wmhdplop should recognize automatically scsi drives,
and even raid arrays.
2004-04-01
The release that will rule the desktops \o/ (v0.9.2) Add mouse
interactivity. Add gkhdplop, the port to gkrellm. wmhdplop
-g=wxh is not resizable
2003-12-18
Improved release \o/ (v0.9.1) Many internal changes. The
dockapp/imlib2 initialisation part was moved to a separate file,
which should be reusable. All option names were changed.. -F is
now --fontpath, -f is --smallfont etc.. The --geometry option was
added in order to launch wmhdplop in undocked mode, with an
arbitray window size. This option has to be used with the
gnome-swallow meta applet (see example on the homepage). The
default font-paths are now scanned recursively.
2003-12-06
Initial release \o/ (v0.9.0)
wmhdplop-0.9.12/Makefile.am 0000644 0002074 0002074 00000001627 13717260455 012432 0000000 0000000 bin_PROGRAMS=wmhdplop
noinst_PROGRAMS=@GKHDPLOP@
EXTRA_PROGRAMS=gkhdplop.so
dist_man_MANS = wmhdplop.1
desktopdir = $(datadir)/applications
dist_desktop_DATA = wmhdplop.desktop
EXTRA_DIST=autogen.sh gkrellm_hdplop.c
IMLIB2_LIBS=@IMLIB2_LIBS@
IMLIB2_CFLAGS=@IMLIB2_CFLAGS@
wmhdplop_SOURCES = wmhdplop.c wmhdplop.h util.c util.h procstat.c procstat.h devnames.c devnames.h global.h dockapp_imlib2.c dockapp_imlib2.h
wmhdplop_LDADD=-lm $(IMLIB2_LIBS)
wmhdplop_CFLAGS=$(IMLIB2_CFLAGS)
# gtk cflags and gtk lib flags
GTK2_CFLAGS = @GTK2_CFLAGS@
GTK2_LIBS = @GTK2_LIBS@
LIBTOOLSUX_GKHDPLOP_SRC=wmhdplop.c util.c util.h procstat.c procstat.h devnames.c devnames.h global.h dockapp_imlib2.c dockapp_imlib2.h gkrellm_hdplop.c
gkhdplop_so_SOURCES=$(LIBTOOLSUX_GKHDPLOP_SRC)
gkhdplop_so_CFLAGS=-DGKRELLM -fPIC $(GTK2_CFLAGS) $(IMLIB2_CFLAGS)
gkhdplop_so_LDADD=$(IMLIB2_LIBS) -lm
gkhdplop_so_LDFLAGS=-shared
all: @GKHDPLOP@
wmhdplop-0.9.12/dockapp_imlib2.c 0000644 0002074 0002074 00000036304 13717260551 013416 0000000 0000000 #include
#include
#include
#include
#include
#include
#include
#include
#include
#include "dockapp_imlib2.h"
#include
#include
#ifdef GKRELLM
#include
#endif
/* require ISO C99 compatibility */
#define DOCKIMLIB2_ERR(...) { fprintf(stderr, "DockImlib2 " DOCKIMLIB2_VERSION " error: "); \
fprintf(stderr, __VA_ARGS__); exit(1); }
#define DOCKIMLIB2_WARN(...) { fprintf(stderr, "DockImlib2 " DOCKIMLIB2_VERSION " warning: "); \
fprintf(stderr, __VA_ARGS__); exit(1); }
static void dockimlib2_set_rect_shape(DockImlib2 *dock, int x, int y, int w, int h) {
Pixmap mask = XCreatePixmap(dock->display, dock->win, dock->win_width, dock->win_height, 1); assert(mask);
GC gc = XCreateGC(dock->display, mask, 0, NULL);
XSetForeground(dock->display, gc, BlackPixel(dock->display, dock->screennum));
XFillRectangle(dock->display, mask, gc, 0, 0, dock->win_width, dock->win_height);
XSetForeground(dock->display, gc, WhitePixel(dock->display, dock->screennum));
XFillRectangle(dock->display, mask, gc, x,y,w,h);
XFreeGC(dock->display,gc);
/* setup shaped window */
XShapeCombineMask(dock->display, dock->normalwin, ShapeBounding,
0, 0, mask, ShapeSet);
if (dock->iconwin)
XShapeCombineMask(dock->display, dock->iconwin, ShapeBounding,
0, 0, mask, ShapeSet);
XFreePixmap(dock->display, mask);
}
/* some general windowmanager related functions ...*/
void set_window_title(Display *display, Window win, char *window_title, char *icon_title) {
int rc;
XTextProperty window_title_property;
/* window name */
rc = XStringListToTextProperty(&window_title,1, &window_title_property); assert(rc);
XSetWMName(display, win, &window_title_property);
XFree(window_title_property.value);
/* icon window name */
rc = XStringListToTextProperty(&icon_title,1, &window_title_property); assert(rc);
XSetWMIconName(display, win, &window_title_property);
XFree(window_title_property.value);
}
void
set_window_class_hint(Display *display, Window win, char *res_class, char *res_name) {
XClassHint *class_hint;
class_hint = XAllocClassHint();
class_hint->res_name = res_name;
class_hint->res_class = res_class;
XSetClassHint(display, win, class_hint);
XFree(class_hint);
}
#ifndef GKRELLM
static void dockimlib2_xinit(DockImlib2 *dock, DockImlib2Prefs *prefs) {
XSizeHints *xsh;
int i;
char *sdisplay = getenv("DISPLAY");
char *pgeom = NULL;
int undocked = 0;
char sdockgeom[40];
assert(prefs->argv); // this should be always set ..
if (prefs->flags & DOCKPREF_DISPLAY) sdisplay = prefs->display;
if (prefs->flags & DOCKPREF_GEOMETRY) { pgeom = prefs->geometry; undocked = 1; }
dock->display = XOpenDisplay(sdisplay);
if(!dock->display) DOCKIMLIB2_ERR("Couldn't connect to display %s\n", sdisplay);
dock->screennum = DefaultScreen(dock->display);
dock->visual = DefaultVisual(dock->display, dock->screennum);
dock->depth = DefaultDepth(dock->display, dock->screennum);
dock->colormap = DefaultColormap(dock->display, dock->screennum);
dock->rootwin = RootWindow(dock->display, dock->screennum);
dock->atom_WM_DELETE_WINDOW = XInternAtom(dock->display, "WM_DELETE_WINDOW", False);
dock->atom_WM_PROTOCOLS = XInternAtom(dock->display, "WM_PROTOCOLS", False);
/* set size hints */
xsh = XAllocSizeHints(); assert(xsh);
xsh->flags = 0;
xsh->width = dock->w;
xsh->height = dock->h;
xsh->x = xsh->y = 0;
snprintf(sdockgeom, sizeof sdockgeom, "%dx%d+0+0", prefs->dockapp_size, prefs->dockapp_size);
xsh->flags = XWMGeometry(dock->display, dock->screennum, pgeom, sdockgeom, 0,
xsh, &xsh->x, &xsh->y, &xsh->width, &xsh->height, &i);
if (undocked) {
dock->win_width = dock->w = xsh->width;
dock->win_height = dock->h = xsh->height;
dock->x0 = dock->y0 = 0;
}
xsh->base_width = xsh->width;
xsh->base_height = xsh->height;
xsh->flags |= USSize | PMinSize | PMaxSize | PSize;
xsh->min_height = 24; xsh->min_height = 24;
xsh->max_width = 500;
xsh->max_height = 500;
/* create the application window */
dock->normalwin = XCreateSimpleWindow(dock->display, dock->rootwin,
xsh->x, xsh->y, xsh->width, xsh->height, 0,
BlackPixel(dock->display, dock->screennum),
WhitePixel(dock->display, dock->screennum));
if(!dock->normalwin) DOCKIMLIB2_ERR("Couldn't create window\n");
if (!undocked) {
/* create icon window */
dock->iconwin = XCreateSimpleWindow(dock->display, dock->rootwin,
xsh->x, xsh->y, xsh->width, xsh->height, 0,
BlackPixel(dock->display, dock->screennum),
WhitePixel(dock->display, dock->screennum));
if(!dock->iconwin) DOCKIMLIB2_ERR("Couldn't create icon window\n");
dock->win = dock->iconwin;
} else {
dock->iconwin = None;
dock->win = dock->normalwin;
}
dock->iconwin_mapped = dock->normalwin_mapped = 1; /* by default */
/* start with an empty window in order to get the background pixmap */
dockimlib2_set_rect_shape(dock,32,32,1,0);
/* set window manager hints */
if (!undocked) {
XWMHints *xwmh;
xwmh = XAllocWMHints();
xwmh->flags = WindowGroupHint | IconWindowHint | StateHint;
xwmh->icon_window = dock->iconwin;
xwmh->window_group = dock->normalwin;
xwmh->initial_state = WithdrawnState;
XSetWMHints(dock->display, dock->normalwin, xwmh);
XFree(xwmh); xwmh = NULL;
}
set_window_class_hint(dock->display, dock->normalwin, prefs->argv[0], prefs->argv[0]);
/* set size hints */
XSetWMNormalHints(dock->display, dock->normalwin, xsh);
set_window_title(dock->display, dock->normalwin, "wmhdplop", "wmhdplop");
/* select events to catch */
{
long evmask = ExposureMask | ButtonPressMask | ButtonReleaseMask | VisibilityChangeMask |
PointerMotionMask | EnterWindowMask | LeaveWindowMask | StructureNotifyMask;
XSelectInput(dock->display, dock->normalwin, evmask);
if (dock->iconwin)
XSelectInput(dock->display, dock->iconwin, evmask);
}
XSetWMProtocols(dock->display, dock->normalwin, &dock->atom_WM_DELETE_WINDOW, 1);
/* set the command line for restarting */
XSetCommand(dock->display, dock->normalwin, prefs->argv, prefs->argc);
/* map the main window */
XMapWindow(dock->display, dock->normalwin);
XFree(xsh); xsh = NULL;
}
#else /* GKRELLM */
void dockimlib2_gkrellm_xinit(DockImlib2 *dock, GdkDrawable *gkdrawable) {
dock->display = GDK_WINDOW_XDISPLAY(gkdrawable);
dock->visual = GDK_VISUAL_XVISUAL(gdk_drawable_get_visual(gkdrawable));
dock->depth = gdk_drawable_get_depth(gkdrawable);
dock->colormap = GDK_COLORMAP_XCOLORMAP(gdk_drawable_get_colormap(gkdrawable));
dock->screennum = DefaultScreen(dock->display);
dock->rootwin = RootWindow(dock->display, dock->screennum);
dock->normalwin = XCreateSimpleWindow(dock->display, GDK_PIXMAP_XID(gkdrawable),
0, 0, dock->w, dock->h, 0,
BlackPixel(dock->display, dock->screennum),
WhitePixel(dock->display, dock->screennum));
//dock->normalwin = GDK_PIXMAP_XID(gkdrawable); // CA CLIGNOTE !!!
dock->iconwin = None; dock->iconwin_mapped = 0;
dock->win = dock->normalwin; dock->normalwin_mapped = 1;
/* start with an empty window in order to get the background pixmap */
dockimlib2_set_rect_shape(dock,32,32,1,0);
/* map the main window */
XMapWindow(dock->display, dock->normalwin);
}
#endif /* GKRELLM */
static void add_fontpath(const char *path, int recurse) {
struct stat st;
if (stat(path,&st) != 0 ||
!S_ISDIR(st.st_mode)) return;
if (recurse > 3) return; /* prevent scanning of whole hd/infinite recursions in case of a bad symlink */
printf("add font path: '%s'\n", path);
imlib_add_path_to_font_path(path);
if (recurse) {
DIR *d = opendir(path);
struct dirent *de;
if (!d) return;
while ((de = readdir(d))) {
char s[1024];
if (strcmp(de->d_name,".") == 0 ||
strcmp(de->d_name,"..") == 0) continue;
snprintf(s,sizeof s,"%s/%s",path, de->d_name);
add_fontpath(s,recurse+1);
}
closedir(d);
}
}
void dockimlib2_reset_imlib(DockImlib2 *dock) {
imlib_free_image();
dock->img = imlib_create_image(dock->w, dock->h);
imlib_context_set_image(dock->img);
imlib_context_set_drawable(dock->win);
dockimlib2_set_rect_shape(dock, dock->x0, dock->y0, dock->w, dock->h);
}
/* setup some default values for imlib2 */
static void dockimlib2_setup_imlib(DockImlib2 *dock) {
char fp[512];
/* set the maximum number of colors to allocate for 8bpp and less to 32 */
imlib_set_color_usage(32);
/* dither for depths < 24bpp */
imlib_context_set_dither(1);
/* set the display , visual, colormap and drawable we are using */
imlib_context_set_display(dock->display);
imlib_context_set_visual(dock->visual);
imlib_context_set_colormap(dock->colormap);
imlib_context_set_drawable(dock->win);
dock->img = imlib_create_image(dock->w, dock->h);
imlib_context_set_image(dock->img);
/* some default font paths */
snprintf(fp, 512, "%s/.fonts", getenv("HOME"));
add_fontpath(fp,1);
/*add_fontpath("/usr/share/fonts/truetype",1);
add_fontpath("/usr/share/fonts/ttf",1);*/
add_fontpath("/usr/share/fonts",1);
add_fontpath("/usr/X11R6/lib/X11/fonts/truetype",1);
add_fontpath("/usr/X11R6/lib/X11/fonts/TrueType",1);
add_fontpath("/usr/X11R6/lib/X11/fonts/ttf",1);
add_fontpath("/usr/X11R6/lib/X11/fonts/TTF",1);
/*imlib_add_path_to_font_path(fp);
imlib_add_path_to_font_path("/usr/share/fonts/truetype");
imlib_add_path_to_font_path("/usr/share/fonts/truetype/freefont");
imlib_add_path_to_font_path("/usr/share/fonts/truetype/ttf-bitstream-vera");
imlib_add_path_to_font_path("/usr/share/fonts/ttf/vera");*/ /* vera on mdk */
imlib_context_set_TTF_encoding(IMLIB_TTF_ENCODING_ISO_8859_1);
//imlib_set_cache_size(0);imlib_set_font_cache_size(0);
}
/* wait for the dockapp to be swallowed and grab the background pixmap */
static void dockimlib2_xstartup(DockImlib2 *dock) {
dock->bg = NULL;
dockimlib2_set_rect_shape(dock, dock->x0, dock->y0, dock->w, dock->h);
#if 0
Window parent = 0;
int exposed = 0, mapped = 0;
printf("xstartup..\n");
do {
XEvent event;
XNextEvent(dock->display, &event);
switch (event.type) {
case ReparentNotify: {
XReparentEvent ev = event.xreparent;
if (ev.window == dock->win) {
parent = ev.parent;
}
} break;
case MapNotify: {
XMappingEvent ev = event.xmapping;
printf("MapNotify: ev.win = %lx\n", ev.window);
if (ev.window == dock->win) mapped = 1;
} break;
case Expose: {
XExposeEvent ev = event.xexpose;
printf("Expose: ev.win = %lx\n", ev.window);
if (ev.window == dock->win) exposed = 1;
} break;
}
} while (parent == 0 && !exposed && !mapped);
if (parent == dock->rootwin) {
printf("... oups, parent window is rootwin ... are you really running windowmaker?\n");
dock->bg = imlib_create_image(dock->w, dock->h);
} else {
imlib_context_set_drawable(parent);
dock->bg = imlib_create_image_from_drawable(0, dock->x0, dock->y0, dock->w, dock->h, 1);
imlib_context_set_drawable(dock->win);
dockimlib2_set_rect_shape(dock, dock->x0, dock->y0, dock->w, dock->h);
}
printf("xstartup : success\n");
#endif
}
#ifndef GKRELLM
DockImlib2* dockimlib2_setup(int x0, int y0, int w, int h, DockImlib2Prefs *prefs) {
#else
DockImlib2* dockimlib2_gkrellm_setup(int x0, int y0, int w, int h, DockImlib2Prefs *prefs, GdkDrawable *gkdrawable) {
#endif
DockImlib2 *dock = calloc(1,sizeof(DockImlib2)); assert(dock);
//gdk_drawable_get_size(gkdrawable, &dock->win_width, &dock->win_height);
//printf("x0=%d, y0=%d, width = %d,%d, height = %d,%d\n", x0,y0,w,h,dock->win_width, dock->win_height);
dock->win_width = w+x0; dock->win_height = h+y0;//DOCK_WIDTH;
dock->x0 = x0; dock->y0 = y0;
dock->w = w; dock->h = h;
#ifndef GKRELLM
dockimlib2_xinit(dock, prefs);
#else
(void) prefs;
dockimlib2_gkrellm_xinit(dock, gkdrawable);
#endif
dockimlib2_setup_imlib(dock);
dockimlib2_xstartup(dock);
return dock;
}
static char *last_font_name = 0;
const char* dockimlib2_last_loaded_font() { return last_font_name; }
Imlib_Font *imlib_load_font_nocase(const char *name) {
Imlib_Font *f;
int i;
if (last_font_name) free(last_font_name);
last_font_name = strdup(name);
if ((f = imlib_load_font(last_font_name))) return f;
for (i=0; last_font_name[i]; ++i) last_font_name[i] = tolower(last_font_name[i]);
if ((f = imlib_load_font(last_font_name))) return f;
for (i=0; last_font_name[i]; ++i) last_font_name[i] = toupper(last_font_name[i]);
f = imlib_load_font(last_font_name);
return f;
}
Imlib_Font *load_font(char *prefname, char **flist_) {
Imlib_Font *f = NULL;
char **flist = flist_;
if (prefname) {
f = imlib_load_font_nocase(prefname);
if (!f) {
int i,np; char **s;
fprintf(stderr, "warning: could not find font '%s' in the font path:\n",prefname);
s = imlib_list_font_path(&np);
for (i=0; i < np; ++i) fprintf(stderr, " %s\n", s[i]);
} else {
printf("loaded font %s\n", prefname);
}
}
if (!f) {
for (; *flist; ++flist) {
if ((f = imlib_load_font_nocase(*flist))) {
printf("loaded font %s\n", *flist); break;
}
}
if (!f) {
fprintf(stderr, "could not load a default ttf font .. I tried ");
flist = flist_;
for (; *flist; ++flist)
fprintf(stderr, "'%s'%s", *flist, (flist[1]?", ":""));
fprintf(stderr, "\nUse the --font* options to change the fontpath/fontnames\n");
}
}
return f;
}
/*
merges dock->bg and dock->img, and renders the result on the window
this function does not alter the imlib context
*/
void dockimlib2_render(DockImlib2 *dock) {
Pixmap olddrawable = imlib_context_get_drawable();
Imlib_Image oldimage = imlib_context_get_image();
//imlib_context_set_drawable(dock->win);
imlib_context_set_image(dock->img);
if (imlib_image_has_alpha()) {
imlib_context_set_image(dock->bg);
Imlib_Image bg = imlib_clone_image();
imlib_context_set_image(bg);
imlib_blend_image_onto_image(dock->img, 0, 0, 0, dock->w, dock->h, 0, 0, dock->w, dock->h);
if (dock->normalwin) {
imlib_context_set_drawable(dock->normalwin);
imlib_render_image_on_drawable(dock->x0, dock->y0);
}
if (dock->iconwin) {
imlib_context_set_drawable(dock->iconwin);
imlib_render_image_on_drawable(dock->x0, dock->y0);
}
/* XSetWindowBackgroundPixmap(dock->display, dock->GKwin, dock->win);
XClearWindow(dock->display, dock->GKWin); */
imlib_free_image();
} else {
if (dock->normalwin_mapped && dock->normalwin) {
imlib_context_set_drawable(dock->normalwin);
imlib_render_image_on_drawable(dock->x0, dock->y0); /* imlib_render_image_on_drawable generates many pages faults !? */
}
if (dock->iconwin_mapped && dock->iconwin) {
imlib_context_set_drawable(dock->iconwin);
imlib_render_image_on_drawable(dock->x0, dock->y0);
}
}
imlib_context_set_image(oldimage);
imlib_context_set_drawable(olddrawable);
}
wmhdplop-0.9.12/COPYING 0000644 0002074 0002074 00000043110 13655747211 011423 0000000 0000000 GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
Copyright (C)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
wmhdplop-0.9.12/AUTHORS 0000644 0002074 0002074 00000000064 13655747211 011441 0000000 0000000 julien pommier (wmhdplop)
frederic jolly (gkhdplop)
wmhdplop-0.9.12/configure 0000755 0002074 0002074 00000632714 14302112222 012267 0000000 0000000 #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.71 for wmhdplop 0.9.12.
#
# Report bugs to .
#
#
# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
# Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
as_nop=:
if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else $as_nop
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
# Reset variables that may have inherited troublesome values from
# the environment.
# IFS needs to be set, to space, tab, and newline, in precisely that order.
# (If _AS_PATH_WALK were called with IFS unset, it would have the
# side effect of setting IFS to empty, thus disabling word splitting.)
# Quoting is to prevent editors from complaining about space-tab.
as_nl='
'
export as_nl
IFS=" "" $as_nl"
PS1='$ '
PS2='> '
PS4='+ '
# Ensure predictable behavior from utilities with locale-dependent output.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# We cannot yet rely on "unset" to work, but we need these variables
# to be unset--not just set to an empty or harmless value--now, to
# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct
# also avoids known problems related to "unset" and subshell syntax
# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
do eval test \${$as_var+y} \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
# Ensure that fds 0, 1, and 2 are open.
if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
if (exec 3>&2) ; then :; else exec 2>/dev/null; fi
# The user is always right.
if ${PATH_SEPARATOR+false} :; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
test -r "$as_dir$0" && as_myself=$as_dir$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="as_nop=:
if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else \$as_nop
case \`(set -o) 2>/dev/null\` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
"
as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }
exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" )
then :
else \$as_nop
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
blah=\$(echo \$(echo blah))
test x\"\$blah\" = xblah || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
if (eval "$as_required") 2>/dev/null
then :
as_have_required=yes
else $as_nop
as_have_required=no
fi
if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
then :
else $as_nop
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
as_found=:
case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
# Try only shells that exist, to save several forks.
as_shell=$as_dir$as_base
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
then :
CONFIG_SHELL=$as_shell as_have_required=yes
if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
then :
break 2
fi
fi
done;;
esac
as_found=false
done
IFS=$as_save_IFS
if $as_found
then :
else $as_nop
if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
then :
CONFIG_SHELL=$SHELL as_have_required=yes
fi
fi
if test "x$CONFIG_SHELL" != x
then :
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno
then :
printf "%s\n" "$0: This script requires a shell more modern than all"
printf "%s\n" "$0: the shells that I found on your system."
if test ${ZSH_VERSION+y} ; then
printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
else
printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
$0: wmaker-dev@googlegroups.com about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
fi
exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_nop
# ---------
# Do nothing but, unlike ":", preserve the value of $?.
as_fn_nop ()
{
return $?
}
as_nop=as_fn_nop
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else $as_nop
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else $as_nop
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
# as_fn_nop
# ---------
# Do nothing but, unlike ":", preserve the value of $?.
as_fn_nop ()
{
return $?
}
as_nop=as_fn_nop
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
printf "%s\n" "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
as_lineno_1=$LINENO as_lineno_1a=$LINENO
as_lineno_2=$LINENO as_lineno_2a=$LINENO
eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
# Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
# Determine whether it's possible to make 'echo' print without a newline.
# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
# for compatibility with existing Makefiles.
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
# For backward compatibility with old third-party macros, we provide
# the shell variables $as_echo and $as_echo_n. New code should use
# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
as_echo='printf %s\n'
as_echo_n='printf %s'
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='wmhdplop'
PACKAGE_TARNAME='wmhdplop'
PACKAGE_VERSION='0.9.12'
PACKAGE_STRING='wmhdplop 0.9.12'
PACKAGE_BUGREPORT='wmaker-dev@googlegroups.com'
PACKAGE_URL=''
ac_unique_file="wmhdplop.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include
#ifdef HAVE_STDIO_H
# include
#endif
#ifdef HAVE_STDLIB_H
# include
#endif
#ifdef HAVE_STRING_H
# include
#endif
#ifdef HAVE_INTTYPES_H
# include
#endif
#ifdef HAVE_STDINT_H
# include
#endif
#ifdef HAVE_STRINGS_H
# include
#endif
#ifdef HAVE_SYS_TYPES_H
# include
#endif
#ifdef HAVE_SYS_STAT_H
# include
#endif
#ifdef HAVE_UNISTD_H
# include
#endif"
ac_header_c_list=
ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
GKHDPLOP
GTK2_LIBS
GTK2_CFLAGS
PACKAGE_LIBS
PACKAGE_CFLAGS
IMLIB2_LIBS
IMLIB2_CFLAGS
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
X_EXTRA_LIBS
X_LIBS
X_PRE_LIBS
X_CFLAGS
CPP
XMKMF
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
am__include
DEPDIR
OBJEXT
EXEEXT
ac_ct_CC
CPPFLAGS
LDFLAGS
CFLAGS
CC
host_os
host_vendor
host_cpu
host
build_os
build_vendor
build_cpu
build
ISODATE
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
AM_V
CSCOPE
ETAGS
CTAGS
am__untar
am__tar
AMTAR
am__leading_dot
SET_MAKE
AWK
mkdir_p
MKDIR_P
INSTALL_STRIP_PROGRAM
STRIP
install_sh
MAKEINFO
AUTOHEADER
AUTOMAKE
AUTOCONF
ACLOCAL
VERSION
PACKAGE
CYGPATH_W
am__isrc
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
target_alias
host_alias
build_alias
LIBS
ECHO_T
ECHO_N
ECHO_C
DEFS
mandir
localedir
libdir
psdir
pdfdir
dvidir
htmldir
infodir
docdir
oldincludedir
includedir
runstatedir
localstatedir
sharedstatedir
sysconfdir
datadir
datarootdir
libexecdir
sbindir
bindir
program_transform_name
prefix
exec_prefix
PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL
am__quote'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_silent_rules
enable_dependency_tracking
with_x
enable_gkrellm
'
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
XMKMF
CPP
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
IMLIB2_CFLAGS
IMLIB2_LIBS
PACKAGE_CFLAGS
PACKAGE_LIBS'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev=
ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=\$ac_option
ac_prev=
continue
fi
case $ac_option in
*=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
*=) ac_optarg= ;;
*) ac_optarg=yes ;;
esac
case $ac_dashdash$ac_option in
--)
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
| --dataroo | --dataro | --datar)
ac_prev=datarootdir ;;
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: \`$ac_useropt'"
ac_useropt_orig=$ac_useropt
ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: \`$ac_useropt'"
ac_useropt_orig=$ac_useropt
ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
| --ht=*)
htmldir=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-runstatedir | --runstatedir | --runstatedi | --runstated \
| --runstate | --runstat | --runsta | --runst | --runs \
| --run | --ru | --r)
ac_prev=runstatedir ;;
-runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
| --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
| --run=* | --ru=* | --r=*)
runstatedir=$ac_optarg ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: \`$ac_useropt'"
ac_useropt_orig=$ac_useropt
ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: \`$ac_useropt'"
ac_useropt_orig=$ac_useropt
ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) as_fn_error $? "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information"
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
: "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
# Check all directory arguments for consistency.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir runstatedir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
case $ac_val in
*/ )
ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
eval $ac_var=\$ac_val;;
esac
# Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
ac_confdir=`$as_dirname -- "$as_myself" ||
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_myself" : 'X\(//\)[^/]' \| \
X"$as_myself" : 'X\(//\)$' \| \
X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$as_myself" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
eval ac_env_${ac_var}_set=\${${ac_var}+set}
eval ac_env_${ac_var}_value=\$${ac_var}
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
eval ac_cv_env_${ac_var}_value=\$${ac_var}
done
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures wmhdplop 0.9.12 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/wmhdplop]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
X features:
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi
if test -n "$ac_init_help"; then
case $ac_init_help in
short | recursive ) echo "Configuration of wmhdplop 0.9.12:";;
esac
cat <<\_ACEOF
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--enable-gkrellm build the gkrellm plugin (requires gtk2 and gkrellm developpement files) (Default is yes)
--disable-gkrellm do not build the gkrellm plugin
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-x use the X Window System
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
XMKMF Path to xmkmf, Makefile generator for X Window System
CPP C preprocessor
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
IMLIB2_CFLAGS
C compiler flags for IMLIB2, overriding pkg-config
IMLIB2_LIBS linker flags for IMLIB2, overriding pkg-config
PACKAGE_CFLAGS
C compiler flags for PACKAGE, overriding pkg-config
PACKAGE_LIBS
linker flags for PACKAGE, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to .
_ACEOF
ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d "$ac_dir" ||
{ cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for configure.gnu first; this name is used for a wrapper for
# Metaconfig's "Configure" on case-insensitive file systems.
if test -f "$ac_srcdir/configure.gnu"; then
echo &&
$SHELL "$ac_srcdir/configure.gnu" --help=recursive
elif test -f "$ac_srcdir/configure"; then
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
wmhdplop configure 0.9.12
generated by GNU Autoconf 2.71
Copyright (C) 2021 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
## ------------------------ ##
## Autoconf initialization. ##
## ------------------------ ##
# ac_fn_c_try_compile LINENO
# --------------------------
# Try to compile conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
rm -f conftest.$ac_objext conftest.beam
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext
then :
ac_retval=0
else $as_nop
printf "%s\n" "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
# ac_fn_c_try_link LINENO
# -----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_link ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_link") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
test -x conftest$ac_exeext
}
then :
ac_retval=0
else $as_nop
printf "%s\n" "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
# Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
# created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
# interfere with the next link command; also delete a directory that is
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_link
# ac_fn_c_try_cpp LINENO
# ----------------------
# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_cpp ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
if { { ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } > conftest.i && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}
then :
ac_retval=0
else $as_nop
printf "%s\n" "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_cpp
# ac_fn_c_check_func LINENO FUNC VAR
# ----------------------------------
# Tests whether FUNC exists, setting the cache variable VAR accordingly
ac_fn_c_check_func ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
printf %s "checking for $2... " >&6; }
if eval test \${$3+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Define $2 to an innocuous variant, in case declares $2.
For example, HP-UX 11i declares gettimeofday. */
#define $2 innocuous_$2
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $2 (); below. */
#include
#undef $2
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char $2 ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_$2 || defined __stub___$2
choke me
#endif
int
main (void)
{
return $2 ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
eval "$3=yes"
else $as_nop
eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
fi
eval ac_res=\$$3
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
printf "%s\n" "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_func
# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists and can be compiled using the include files in
# INCLUDES, setting the cache variable VAR accordingly.
ac_fn_c_check_header_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
printf %s "checking for $2... " >&6; }
if eval test \${$3+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"
then :
eval "$3=yes"
else $as_nop
eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
fi
eval ac_res=\$$3
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
printf "%s\n" "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
ac_configure_args_raw=
for ac_arg
do
case $ac_arg in
*\'*)
ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append ac_configure_args_raw " '$ac_arg'"
done
case $ac_configure_args_raw in
*$as_nl*)
ac_safe_unquote= ;;
*)
ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab.
ac_unsafe_a="$ac_unsafe_z#~"
ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g"
ac_configure_args_raw=` printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;;
esac
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by wmhdplop $as_me 0.9.12, which was
generated by GNU Autoconf 2.71. Invocation command line was
$ $0$ac_configure_args_raw
_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
printf "%s\n" "PATH: $as_dir"
done
IFS=$as_save_IFS
} >&5
cat >&5 <<_ACEOF
## ----------- ##
## Core tests. ##
## ----------- ##
_ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
for ac_arg
do
case $ac_arg in
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
case $ac_arg in
*=* | --config-cache | -C | -disable-* | --disable-* \
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
| -with-* | --with-* | -without-* | --without-* | --x)
case "$ac_configure_args0 " in
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
esac
;;
-* ) ac_must_keep_next=true ;;
esac
fi
as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Sanitize IFS.
IFS=" "" $as_nl"
# Save into config.log some information that might help in debugging.
{
echo
printf "%s\n" "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
sed -n \
"s/'\''/'\''\\\\'\'''\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
;; #(
*)
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
)
echo
printf "%s\n" "## ----------------- ##
## Output variables. ##
## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
printf "%s\n" "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
printf "%s\n" "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
printf "%s\n" "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
if test -s confdefs.h; then
printf "%s\n" "## ----------- ##
## confdefs.h. ##
## ----------- ##"
echo
cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
printf "%s\n" "$as_me: caught signal $ac_signal"
printf "%s\n" "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
printf "%s\n" "/* confdefs.h */" > confdefs.h
# Predefined preprocessor variables.
printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h
printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h
printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h
printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h
printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h
printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
if test -n "$CONFIG_SITE"; then
ac_site_files="$CONFIG_SITE"
elif test "x$prefix" != xNONE; then
ac_site_files="$prefix/share/config.site $prefix/etc/config.site"
else
ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
for ac_site_file in $ac_site_files
do
case $ac_site_file in #(
*/*) :
;; #(
*) :
ac_site_file=./$ac_site_file ;;
esac
if test -f "$ac_site_file" && test -r "$ac_site_file"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file" \
|| { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special files
# actually), so we avoid doing that. DJGPP emulates it as a regular file.
if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
printf "%s\n" "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
printf "%s\n" "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Test code for whether the C compiler supports C89 (global declarations)
ac_c_conftest_c89_globals='
/* Does the compiler advertise C89 conformance?
Do not test the value of __STDC__, because some compilers set it to 0
while being otherwise adequately conformant. */
#if !defined __STDC__
# error "Compiler does not advertise C89 conformance"
#endif
#include
#include
struct stat;
/* Most of the following tests are stolen from RCS 5.7 src/conf.sh. */
struct buf { int x; };
struct buf * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not \xHH hex character constants.
These do not provoke an error unfortunately, instead are silently treated
as an "x". The following induces an error, until -std is added to get
proper ANSI mode. Curiously \x00 != x always comes out true, for an
array size at least. It is necessary to write \x00 == 0 to get something
that is true only with -std. */
int osf4_cc_array ['\''\x00'\'' == 0 ? 1 : -1];
/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
inside strings and character constants. */
#define FOO(x) '\''x'\''
int xlc6_cc_array[FOO(a) == '\''x'\'' ? 1 : -1];
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, int *(*)(struct buf *, struct stat *, int),
int, int);'
# Test code for whether the C compiler supports C89 (body of main).
ac_c_conftest_c89_main='
ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]);
'
# Test code for whether the C compiler supports C99 (global declarations)
ac_c_conftest_c99_globals='
// Does the compiler advertise C99 conformance?
#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L
# error "Compiler does not advertise C99 conformance"
#endif
#include
extern int puts (const char *);
extern int printf (const char *, ...);
extern int dprintf (int, const char *, ...);
extern void *malloc (size_t);
// Check varargs macros. These examples are taken from C99 6.10.3.5.
// dprintf is used instead of fprintf to avoid needing to declare
// FILE and stderr.
#define debug(...) dprintf (2, __VA_ARGS__)
#define showlist(...) puts (#__VA_ARGS__)
#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
static void
test_varargs_macros (void)
{
int x = 1234;
int y = 5678;
debug ("Flag");
debug ("X = %d\n", x);
showlist (The first, second, and third items.);
report (x>y, "x is %d but y is %d", x, y);
}
// Check long long types.
#define BIG64 18446744073709551615ull
#define BIG32 4294967295ul
#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
#if !BIG_OK
#error "your preprocessor is broken"
#endif
#if BIG_OK
#else
#error "your preprocessor is broken"
#endif
static long long int bignum = -9223372036854775807LL;
static unsigned long long int ubignum = BIG64;
struct incomplete_array
{
int datasize;
double data[];
};
struct named_init {
int number;
const wchar_t *name;
double average;
};
typedef const char *ccp;
static inline int
test_restrict (ccp restrict text)
{
// See if C++-style comments work.
// Iterate through items via the restricted pointer.
// Also check for declarations in for loops.
for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i)
continue;
return 0;
}
// Check varargs and va_copy.
static bool
test_varargs (const char *format, ...)
{
va_list args;
va_start (args, format);
va_list args_copy;
va_copy (args_copy, args);
const char *str = "";
int number = 0;
float fnumber = 0;
while (*format)
{
switch (*format++)
{
case '\''s'\'': // string
str = va_arg (args_copy, const char *);
break;
case '\''d'\'': // int
number = va_arg (args_copy, int);
break;
case '\''f'\'': // float
fnumber = va_arg (args_copy, double);
break;
default:
break;
}
}
va_end (args_copy);
va_end (args);
return *str && number && fnumber;
}
'
# Test code for whether the C compiler supports C99 (body of main).
ac_c_conftest_c99_main='
// Check bool.
_Bool success = false;
success |= (argc != 0);
// Check restrict.
if (test_restrict ("String literal") == 0)
success = true;
char *restrict newvar = "Another string";
// Check varargs.
success &= test_varargs ("s, d'\'' f .", "string", 65, 34.234);
test_varargs_macros ();
// Check flexible array members.
struct incomplete_array *ia =
malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
ia->datasize = 10;
for (int i = 0; i < ia->datasize; ++i)
ia->data[i] = i * 1.234;
// Check named initializers.
struct named_init ni = {
.number = 34,
.name = L"Test wide string",
.average = 543.34343,
};
ni.number = 58;
int dynamic_array[ni.number];
dynamic_array[0] = argv[0][0];
dynamic_array[ni.number - 1] = 543;
// work around unused variable warnings
ok |= (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == '\''x'\''
|| dynamic_array[ni.number - 1] != 543);
'
# Test code for whether the C compiler supports C11 (global declarations)
ac_c_conftest_c11_globals='
// Does the compiler advertise C11 conformance?
#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
# error "Compiler does not advertise C11 conformance"
#endif
// Check _Alignas.
char _Alignas (double) aligned_as_double;
char _Alignas (0) no_special_alignment;
extern char aligned_as_int;
char _Alignas (0) _Alignas (int) aligned_as_int;
// Check _Alignof.
enum
{
int_alignment = _Alignof (int),
int_array_alignment = _Alignof (int[100]),
char_alignment = _Alignof (char)
};
_Static_assert (0 < -_Alignof (int), "_Alignof is signed");
// Check _Noreturn.
int _Noreturn does_not_return (void) { for (;;) continue; }
// Check _Static_assert.
struct test_static_assert
{
int x;
_Static_assert (sizeof (int) <= sizeof (long int),
"_Static_assert does not work in struct");
long int y;
};
// Check UTF-8 literals.
#define u8 syntax error!
char const utf8_literal[] = u8"happens to be ASCII" "another string";
// Check duplicate typedefs.
typedef long *long_ptr;
typedef long int *long_ptr;
typedef long_ptr long_ptr;
// Anonymous structures and unions -- taken from C11 6.7.2.1 Example 1.
struct anonymous
{
union {
struct { int i; int j; };
struct { int k; long int l; } w;
};
int m;
} v1;
'
# Test code for whether the C compiler supports C11 (body of main).
ac_c_conftest_c11_main='
_Static_assert ((offsetof (struct anonymous, i)
== offsetof (struct anonymous, w.k)),
"Anonymous union alignment botch");
v1.i = 2;
v1.w.k = 5;
ok |= v1.i != 5;
'
# Test code for whether the C compiler supports C11 (complete).
ac_c_conftest_c11_program="${ac_c_conftest_c89_globals}
${ac_c_conftest_c99_globals}
${ac_c_conftest_c11_globals}
int
main (int argc, char **argv)
{
int ok = 0;
${ac_c_conftest_c89_main}
${ac_c_conftest_c99_main}
${ac_c_conftest_c11_main}
return ok;
}
"
# Test code for whether the C compiler supports C99 (complete).
ac_c_conftest_c99_program="${ac_c_conftest_c89_globals}
${ac_c_conftest_c99_globals}
int
main (int argc, char **argv)
{
int ok = 0;
${ac_c_conftest_c89_main}
${ac_c_conftest_c99_main}
return ok;
}
"
# Test code for whether the C compiler supports C89 (complete).
ac_c_conftest_c89_program="${ac_c_conftest_c89_globals}
int
main (int argc, char **argv)
{
int ok = 0;
${ac_c_conftest_c89_main}
return ok;
}
"
as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H"
as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H"
as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H"
as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H"
as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H"
as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H"
as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H"
as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H"
as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H"
# Auxiliary files required by this configure script.
ac_aux_files="compile config.guess config.sub missing install-sh"
# Locations in which to look for auxiliary files.
ac_aux_dir_candidates="${srcdir}${PATH_SEPARATOR}${srcdir}/..${PATH_SEPARATOR}${srcdir}/../.."
# Search for a directory containing all of the required auxiliary files,
# $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates.
# If we don't find one directory that contains all the files we need,
# we report the set of missing files from the *first* directory in
# $ac_aux_dir_candidates and give up.
ac_missing_aux_files=""
ac_first_candidate=:
printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in $ac_aux_dir_candidates
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
as_found=:
printf "%s\n" "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5
ac_aux_dir_found=yes
ac_install_sh=
for ac_aux in $ac_aux_files
do
# As a special case, if "install-sh" is required, that requirement
# can be satisfied by any of "install-sh", "install.sh", or "shtool",
# and $ac_install_sh is set appropriately for whichever one is found.
if test x"$ac_aux" = x"install-sh"
then
if test -f "${as_dir}install-sh"; then
printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5
ac_install_sh="${as_dir}install-sh -c"
elif test -f "${as_dir}install.sh"; then
printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5
ac_install_sh="${as_dir}install.sh -c"
elif test -f "${as_dir}shtool"; then
printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5
ac_install_sh="${as_dir}shtool install -c"
else
ac_aux_dir_found=no
if $ac_first_candidate; then
ac_missing_aux_files="${ac_missing_aux_files} install-sh"
else
break
fi
fi
else
if test -f "${as_dir}${ac_aux}"; then
printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5
else
ac_aux_dir_found=no
if $ac_first_candidate; then
ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}"
else
break
fi
fi
fi
done
if test "$ac_aux_dir_found" = yes; then
ac_aux_dir="$as_dir"
break
fi
ac_first_candidate=false
as_found=false
done
IFS=$as_save_IFS
if $as_found
then :
else $as_nop
as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
if test -f "${ac_aux_dir}config.guess"; then
ac_config_guess="$SHELL ${ac_aux_dir}config.guess"
fi
if test -f "${ac_aux_dir}config.sub"; then
ac_config_sub="$SHELL ${ac_aux_dir}config.sub"
fi
if test -f "$ac_aux_dir/configure"; then
ac_configure="$SHELL ${ac_aux_dir}configure"
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val=\$ac_cv_env_${ac_var}_value
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
# differences in whitespace do not lead to failure.
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
printf "%s\n" "$as_me: former value: \`$ac_old_val'" >&2;}
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
printf "%s\n" "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
*\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
*) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;}
as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file'
and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
am__api_version='1.16'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
printf %s "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if test ${ac_cv_path_install+y}
then :
printf %s "(cached) " >&6
else $as_nop
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
# Account for fact that we put trailing slashes in our PATH walk.
case $as_dir in #((
./ | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
elif test $ac_prog = install &&
grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# program-specific install script used by HP pwplus--don't use.
:
else
rm -rf conftest.one conftest.two conftest.dir
echo one > conftest.one
echo two > conftest.two
mkdir conftest.dir
if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" &&
test -s conftest.one && test -s conftest.two &&
test -s conftest.dir/conftest.one &&
test -s conftest.dir/conftest.two
then
ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c"
break 3
fi
fi
fi
done
done
;;
esac
done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
fi
if test ${ac_cv_path_install+y}; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. Don't cache a
# value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
printf "%s\n" "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
printf %s "checking whether build environment is sane... " >&6; }
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
if test "$2" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$2" = conftest.file
)
then
# Ok.
:
else
as_fn_error $? "newly created file is older than distributed files!
Check your system clock" "$LINENO" 5
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
rm -f conftest.file
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $.
# By default was `s,x,x', remove it if useless.
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`printf "%s\n" "$program_transform_name" | sed "$ac_script"`
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
printf "%s\n" "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_STRIP+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
printf "%s\n" "$STRIP" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_ac_ct_STRIP+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
printf "%s\n" "$ac_ct_STRIP" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a race-free mkdir -p" >&5
printf %s "checking for a race-free mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
if test ${ac_cv_path_mkdir+y}
then :
printf %s "(cached) " >&6
else $as_nop
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue
case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir ('*'coreutils) '* | \
'BusyBox '* | \
'mkdir (fileutils) '4.1*)
ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext
break 3;;
esac
done
done
done
IFS=$as_save_IFS
fi
test -d ./--version && rmdir ./--version
if test ${ac_cv_path_mkdir+y}; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
# As a last resort, use the slow shell script. Don't cache a
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
MKDIR_P="$ac_install_sh -d"
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
printf "%s\n" "$MKDIR_P" >&6; }
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_AWK+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
printf "%s\n" "$AWK" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
test -n "$AWK" && break
done
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
printf %s "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`printf "%s\n" "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if eval test \${ac_cv_prog_make_${ac_make}_set+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
SET_MAKE=
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
# Check whether --enable-silent-rules was given.
if test ${enable_silent_rules+y}
then :
enableval=$enable_silent_rules;
fi
case $enable_silent_rules in # (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=1;;
esac
am_make=${MAKE-make}
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
printf %s "checking whether $am_make supports nested variables... " >&6; }
if test ${am_cv_make_support_nested_variables+y}
then :
printf %s "(cached) " >&6
else $as_nop
if printf "%s\n" 'TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
printf "%s\n" "$am_cv_make_support_nested_variables" >&6; }
if test $am_cv_make_support_nested_variables = yes; then
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AM_BACKSLASH='\'
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
# Define the identity of the package.
PACKAGE='wmhdplop'
VERSION='0.9.12'
printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h
printf "%s\n" "#define VERSION \"$VERSION\"" >>confdefs.h
# Some tools Automake needs.
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
# Variables for tags utilities; see am/tags.am
if test -z "$CTAGS"; then
CTAGS=ctags
fi
if test -z "$ETAGS"; then
ETAGS=etags
fi
if test -z "$CSCOPE"; then
CSCOPE=cscope
fi
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
ac_config_headers="$ac_config_headers config.h"
ISODATE=`date +%Y-%m-%d`
# Make sure we can run config.sub.
$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 ||
as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
printf %s "checking build system type... " >&6; }
if test ${ac_cv_build+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"`
test "x$ac_build_alias" = x &&
as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` ||
as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
printf "%s\n" "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
printf %s "checking host system type... " >&6; }
if test ${ac_cv_host+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` ||
as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
printf "%s\n" "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
printf "%s\n" "$CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_ac_ct_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
printf "%s\n" "$ac_ct_CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
printf "%s\n" "$CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
if test "$as_dir$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
printf "%s\n" "$CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
printf "%s\n" "$CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_ac_ct_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
printf "%s\n" "$ac_ct_CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
test -n "$ac_ct_CC" && break
done
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}clang", so it can be a program name with args.
set dummy ${ac_tool_prefix}clang; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}clang"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
printf "%s\n" "$CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "clang", so it can be a program name with args.
set dummy clang; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_prog_ac_ct_CC+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="clang"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
printf "%s\n" "$ac_ct_CC" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
fi
test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion -version; do
{ { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
sed '10a\
... rest of stderr output deleted ...
10q' conftest.err >conftest.er1
cat conftest.er1 >&5
fi
rm -f conftest.er1 conftest.err
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
printf %s "checking whether the C compiler works... " >&6; }
ac_link_default=`printf "%s\n" "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
ac_rmfiles=
for ac_file in $ac_files
do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
* ) ac_rmfiles="$ac_rmfiles $ac_file";;
esac
done
rm -f $ac_rmfiles
if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
then :
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
# We set ac_cv_exeext here because the later test for it is not
# safe: cross compilers may not add the suffix if given an `-o'
# argument, so we may need to know it at that point already.
# Even if this section looks crufty: it has the advantage of
# actually working.
break;;
* )
break;;
esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=
else $as_nop
ac_file=''
fi
if test -z "$ac_file"
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
printf "%s\n" "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
See \`config.log' for more details" "$LINENO" 5; }
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
printf %s "checking for C compiler default output file name... " >&6; }
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
printf "%s\n" "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
printf %s "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
then :
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
break;;
* ) break;;
esac
done
else $as_nop
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
printf "%s\n" "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
int
main (void)
{
FILE *f = fopen ("conftest.out", "w");
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
printf %s "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
{ { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if { ac_try='./conftest$ac_cv_exeext'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details" "$LINENO" 5; }
fi
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
printf "%s\n" "$cross_compiling" >&6; }
rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
printf %s "checking for suffix of object files... " >&6; }
if test ${ac_cv_objext+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
printf "%s\n" "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
then :
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else $as_nop
printf "%s\n" "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
printf "%s\n" "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C" >&5
printf %s "checking whether the compiler supports GNU C... " >&6; }
if test ${ac_cv_c_compiler_gnu+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"
then :
ac_compiler_gnu=yes
else $as_nop
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; }
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test $ac_compiler_gnu = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS=${CFLAGS+y}
ac_save_CFLAGS=$CFLAGS
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
printf %s "checking whether $CC accepts -g... " >&6; }
if test ${ac_cv_prog_cc_g+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"
then :
ac_cv_prog_cc_g=yes
else $as_nop
CFLAGS=""
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"
then :
else $as_nop
ac_c_werror_flag=$ac_save_c_werror_flag
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"
then :
ac_cv_prog_cc_g=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
printf "%s\n" "$ac_cv_prog_cc_g" >&6; }
if test $ac_test_CFLAGS; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
ac_prog_cc_stdc=no
if test x$ac_prog_cc_stdc = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C11 features" >&5
printf %s "checking for $CC option to enable C11 features... " >&6; }
if test ${ac_cv_prog_cc_c11+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_cv_prog_cc_c11=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$ac_c_conftest_c11_program
_ACEOF
for ac_arg in '' -std=gnu11
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"
then :
ac_cv_prog_cc_c11=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam
test "x$ac_cv_prog_cc_c11" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
if test "x$ac_cv_prog_cc_c11" = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
printf "%s\n" "unsupported" >&6; }
else $as_nop
if test "x$ac_cv_prog_cc_c11" = x
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
printf "%s\n" "none needed" >&6; }
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5
printf "%s\n" "$ac_cv_prog_cc_c11" >&6; }
CC="$CC $ac_cv_prog_cc_c11"
fi
ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11
ac_prog_cc_stdc=c11
fi
fi
if test x$ac_prog_cc_stdc = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C99 features" >&5
printf %s "checking for $CC option to enable C99 features... " >&6; }
if test ${ac_cv_prog_cc_c99+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_cv_prog_cc_c99=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$ac_c_conftest_c99_program
_ACEOF
for ac_arg in '' -std=gnu99 -std=c99 -c99 -qlanglvl=extc1x -qlanglvl=extc99 -AC99 -D_STDC_C99=
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"
then :
ac_cv_prog_cc_c99=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam
test "x$ac_cv_prog_cc_c99" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
if test "x$ac_cv_prog_cc_c99" = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
printf "%s\n" "unsupported" >&6; }
else $as_nop
if test "x$ac_cv_prog_cc_c99" = x
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
printf "%s\n" "none needed" >&6; }
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
printf "%s\n" "$ac_cv_prog_cc_c99" >&6; }
CC="$CC $ac_cv_prog_cc_c99"
fi
ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
ac_prog_cc_stdc=c99
fi
fi
if test x$ac_prog_cc_stdc = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C89 features" >&5
printf %s "checking for $CC option to enable C89 features... " >&6; }
if test ${ac_cv_prog_cc_c89+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$ac_c_conftest_c89_program
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"
then :
ac_cv_prog_cc_c89=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
if test "x$ac_cv_prog_cc_c89" = xno
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
printf "%s\n" "unsupported" >&6; }
else $as_nop
if test "x$ac_cv_prog_cc_c89" = x
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
printf "%s\n" "none needed" >&6; }
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
printf "%s\n" "$ac_cv_prog_cc_c89" >&6; }
CC="$CC $ac_cv_prog_cc_c89"
fi
ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
ac_prog_cc_stdc=c89
fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
printf %s "checking whether $CC understands -c and -o together... " >&6; }
if test ${am_cv_prog_cc_c_o+y}
then :
printf %s "(cached) " >&6
else $as_nop
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
printf "%s\n" "$am_cv_prog_cc_c_o" >&6; }
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
printf %s "checking whether ${MAKE-make} supports the include directive... " >&6; }
cat > confinc.mk << 'END'
am__doit:
@echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
am__include="#"
am__quote=
# BSD make does it like this.
echo '.include "confinc.mk" # ignored' > confmf.BSD
# Other make implementations (GNU, Solaris 10, AIX) do it like this.
echo 'include confinc.mk # ignored' > confmf.GNU
_am_result=no
for s in GNU BSD; do
{ echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
(${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
case $?:`cat confinc.out 2>/dev/null` in #(
'0:this is the am__doit target') :
case $s in #(
BSD) :
am__include='.include' am__quote='"' ;; #(
*) :
am__include='include' am__quote='' ;;
esac ;; #(
*) :
;;
esac
if test "$am__include" != "#"; then
_am_result="yes ($s style)"
break
fi
done
rm -f confinc.* confmf.*
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
printf "%s\n" "${_am_result}" >&6; }
# Check whether --enable-dependency-tracking was given.
if test ${enable_dependency_tracking+y}
then :
enableval=$enable_dependency_tracking;
fi
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
AMDEP_TRUE='#'
AMDEP_FALSE=
fi
depcc="$CC" am_compiler_list=
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
printf %s "checking dependency style of $depcc... " >&6; }
if test ${am_cv_CC_dependencies_compiler_type+y}
then :
printf %s "(cached) " >&6
else $as_nop
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_CC_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
am__universal=false
case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CC_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_CC_dependencies_compiler_type=none
fi
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
printf "%s\n" "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
am__fastdepCC_FALSE='#'
else
am__fastdepCC_TRUE='#'
am__fastdepCC_FALSE=
fi
printf "%s\n" "#define ENABLE_HDDTEMP_QUERY /**/" >>confdefs.h
printf "%s\n" "#define _GNU_SOURCE /**/" >>confdefs.h
if test x$GCC = xyes; then
CFLAGS="-O3 -fomit-frame-pointer -ffast-math -Wall -W";
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
printf %s "checking how to run the C preprocessor... " >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if test ${ac_cv_prog_CPP+y}
then :
printf %s "(cached) " >&6
else $as_nop
# Double quotes because $CC needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" cpp /lib/cpp
do
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"
then :
else $as_nop
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if ac_fn_c_try_cpp "$LINENO"
then :
# Broken: success on invalid input.
continue
else $as_nop
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok
then :
break
fi
done
ac_cv_prog_CPP=$CPP
fi
CPP=$ac_cv_prog_CPP
else
ac_cv_prog_CPP=$CPP
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
printf "%s\n" "$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"
then :
else $as_nop
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if ac_fn_c_try_cpp "$LINENO"
then :
# Broken: success on invalid input.
continue
else $as_nop
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok
then :
else $as_nop
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details" "$LINENO" 5; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for X" >&5
printf %s "checking for X... " >&6; }
# Check whether --with-x was given.
if test ${with_x+y}
then :
withval=$with_x;
fi
# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
# The user explicitly disabled X.
have_x=disabled
else
case $x_includes,$x_libraries in #(
*\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #(
*,NONE | NONE,*) if test ${ac_cv_have_x+y}
then :
printf %s "(cached) " >&6
else $as_nop
# One or both of the vars are not set, and there is no cached value.
ac_x_includes=no
ac_x_libraries=no
# Do we need to do anything special at all?
ac_save_LIBS=$LIBS
LIBS="-lX11 $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
int
main (void)
{
XrmInitialize ()
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
# We can compile and link X programs with no special options.
ac_x_includes=
ac_x_libraries=
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
# If that didn't work, only try xmkmf and file system searches
# for native compilation.
if test x"$ac_x_includes" = xno && test "$cross_compiling" = no
then :
rm -f -r conftest.dir
if mkdir conftest.dir; then
cd conftest.dir
cat >Imakefile <<'_ACEOF'
incroot:
@echo incroot='${INCROOT}'
usrlibdir:
@echo usrlibdir='${USRLIBDIR}'
libdir:
@echo libdir='${LIBDIR}'
_ACEOF
if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
for ac_var in incroot usrlibdir libdir; do
eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
done
# Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
for ac_extension in a so sl dylib la dll; do
if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
test -f "$ac_im_libdir/libX11.$ac_extension"; then
ac_im_usrlibdir=$ac_im_libdir; break
fi
done
# Screen out bogus values from the imake configuration. They are
# bogus both because they are the default anyway, and because
# using them would break gcc on systems where it needs fixed includes.
case $ac_im_incroot in
/usr/include) ac_x_includes= ;;
*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
esac
case $ac_im_usrlibdir in
/usr/lib | /usr/lib64 | /lib | /lib64) ;;
*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
esac
fi
cd ..
rm -f -r conftest.dir
fi
# Standard set of common directories for X headers.
# Check X11 before X11Rn because it is often a symlink to the current release.
ac_x_header_dirs='
/usr/X11/include
/usr/X11R7/include
/usr/X11R6/include
/usr/X11R5/include
/usr/X11R4/include
/usr/include/X11
/usr/include/X11R7
/usr/include/X11R6
/usr/include/X11R5
/usr/include/X11R4
/usr/local/X11/include
/usr/local/X11R7/include
/usr/local/X11R6/include
/usr/local/X11R5/include
/usr/local/X11R4/include
/usr/local/include/X11
/usr/local/include/X11R7
/usr/local/include/X11R6
/usr/local/include/X11R5
/usr/local/include/X11R4
/opt/X11/include
/usr/X386/include
/usr/x386/include
/usr/XFree86/include/X11
/usr/include
/usr/local/include
/usr/unsupported/include
/usr/athena/include
/usr/local/x11r5/include
/usr/lpp/Xamples/include
/usr/openwin/include
/usr/openwin/share/include'
if test "$ac_x_includes" = no; then
# Guess where to find include files, by looking for Xlib.h.
# First, try using that file with no special directory specified.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if ac_fn_c_try_cpp "$LINENO"
then :
# We can compile using X headers with no special include directory.
ac_x_includes=
else $as_nop
for ac_dir in $ac_x_header_dirs; do
if test -r "$ac_dir/X11/Xlib.h"; then
ac_x_includes=$ac_dir
break
fi
done
fi
rm -f conftest.err conftest.i conftest.$ac_ext
fi # $ac_x_includes = no
if test "$ac_x_libraries" = no; then
# Check for the libraries.
# See if we find them without any special options.
# Don't add to $LIBS permanently.
ac_save_LIBS=$LIBS
LIBS="-lX11 $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
int
main (void)
{
XrmInitialize ()
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
LIBS=$ac_save_LIBS
# We can link X programs with no special library path.
ac_x_libraries=
else $as_nop
LIBS=$ac_save_LIBS
for ac_dir in `printf "%s\n" "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
# Don't even attempt the hair of trying to link an X program!
for ac_extension in a so sl dylib la dll; do
if test -r "$ac_dir/libX11.$ac_extension"; then
ac_x_libraries=$ac_dir
break 2
fi
done
done
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
fi # $ac_x_libraries = no
fi
# Record the results.
case $ac_x_includes,$ac_x_libraries in #(
no,* | *,no | *\'*) :
# Didn't find X, or a directory has "'" in its name.
ac_cv_have_x="have_x=no" ;; #(
*) :
# Record where we found X for the cache.
ac_cv_have_x="have_x=yes\
ac_x_includes='$ac_x_includes'\
ac_x_libraries='$ac_x_libraries'" ;;
esac
fi
;; #(
*) have_x=yes;;
esac
eval "$ac_cv_have_x"
fi # $with_x != no
if test "$have_x" != yes; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5
printf "%s\n" "$have_x" >&6; }
no_x=yes
else
# If each of the values was on the command line, it overrides each guess.
test "x$x_includes" = xNONE && x_includes=$ac_x_includes
test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
# Update the cache value to reflect the command line values.
ac_cv_have_x="have_x=yes\
ac_x_includes='$x_includes'\
ac_x_libraries='$x_libraries'"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5
printf "%s\n" "libraries $x_libraries, headers $x_includes" >&6; }
fi
if test "$no_x" = yes; then
# Not all programs may use this symbol, but it does not hurt to define it.
printf "%s\n" "#define X_DISPLAY_MISSING 1" >>confdefs.h
X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
else
if test -n "$x_includes"; then
X_CFLAGS="$X_CFLAGS -I$x_includes"
fi
# It would also be nice to do this for all -L options, not just this one.
if test -n "$x_libraries"; then
X_LIBS="$X_LIBS -L$x_libraries"
# For Solaris; some versions of Sun CC require a space after -R and
# others require no space. Words are not sufficient . . . .
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5
printf %s "checking whether -R must be followed by a space... " >&6; }
ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
ac_xsave_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
X_LIBS="$X_LIBS -R$x_libraries"
else $as_nop
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main (void)
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
X_LIBS="$X_LIBS -R $x_libraries"
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: neither works" >&5
printf "%s\n" "neither works" >&6; }
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
ac_c_werror_flag=$ac_xsave_c_werror_flag
LIBS=$ac_xsave_LIBS
fi
# Check for system-dependent libraries X programs must link with.
# Do this before checking for the system-independent R6 libraries
# (-lICE), since we may need -lsocket or whatever for X linking.
if test "$ISC" = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
else
# Martyn Johnson says this is needed for Ultrix, if the X
# libraries were built with DECnet support. And Karl Berry says
# the Alpha needs dnet_stub (dnet does not exist).
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char XOpenDisplay ();
int
main (void)
{
return XOpenDisplay ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
else $as_nop
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5
printf %s "checking for dnet_ntoa in -ldnet... " >&6; }
if test ${ac_cv_lib_dnet_dnet_ntoa+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char dnet_ntoa ();
int
main (void)
{
return dnet_ntoa ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_dnet_dnet_ntoa=yes
else $as_nop
ac_cv_lib_dnet_dnet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
printf "%s\n" "$ac_cv_lib_dnet_dnet_ntoa" >&6; }
if test "x$ac_cv_lib_dnet_dnet_ntoa" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
fi
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5
printf %s "checking for dnet_ntoa in -ldnet_stub... " >&6; }
if test ${ac_cv_lib_dnet_stub_dnet_ntoa+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet_stub $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char dnet_ntoa ();
int
main (void)
{
return dnet_ntoa ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_dnet_stub_dnet_ntoa=yes
else $as_nop
ac_cv_lib_dnet_stub_dnet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
printf "%s\n" "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
fi
fi
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_xsave_LIBS"
# msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
# to get the SysV transport functions.
# Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
# needs -lnsl.
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to T.E. Dickey.
# The functions gethostbyname, getservbyname, and inet_addr are
# in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
if test "x$ac_cv_func_gethostbyname" = xyes
then :
fi
if test $ac_cv_func_gethostbyname = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
printf %s "checking for gethostbyname in -lnsl... " >&6; }
if test ${ac_cv_lib_nsl_gethostbyname+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lnsl $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char gethostbyname ();
int
main (void)
{
return gethostbyname ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_nsl_gethostbyname=yes
else $as_nop
ac_cv_lib_nsl_gethostbyname=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
printf "%s\n" "$ac_cv_lib_nsl_gethostbyname" >&6; }
if test "x$ac_cv_lib_nsl_gethostbyname" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
fi
if test $ac_cv_lib_nsl_gethostbyname = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5
printf %s "checking for gethostbyname in -lbsd... " >&6; }
if test ${ac_cv_lib_bsd_gethostbyname+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lbsd $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char gethostbyname ();
int
main (void)
{
return gethostbyname ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_bsd_gethostbyname=yes
else $as_nop
ac_cv_lib_bsd_gethostbyname=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5
printf "%s\n" "$ac_cv_lib_bsd_gethostbyname" >&6; }
if test "x$ac_cv_lib_bsd_gethostbyname" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
fi
fi
fi
# lieder@skyler.mavd.honeywell.com says without -lsocket,
# socket/setsockopt and other routines are undefined under SCO ODT
# 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
# on later versions), says Simon Leinen: it contains gethostby*
# variants that don't use the name server (or something). -lsocket
# must be given before -lnsl if both are needed. We assume that
# if connect needs -lnsl, so does gethostbyname.
ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect"
if test "x$ac_cv_func_connect" = xyes
then :
fi
if test $ac_cv_func_connect = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5
printf %s "checking for connect in -lsocket... " >&6; }
if test ${ac_cv_lib_socket_connect+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char connect ();
int
main (void)
{
return connect ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_socket_connect=yes
else $as_nop
ac_cv_lib_socket_connect=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5
printf "%s\n" "$ac_cv_lib_socket_connect" >&6; }
if test "x$ac_cv_lib_socket_connect" = xyes
then :
X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
fi
fi
# Guillermo Gomez says -lposix is necessary on A/UX.
ac_fn_c_check_func "$LINENO" "remove" "ac_cv_func_remove"
if test "x$ac_cv_func_remove" = xyes
then :
fi
if test $ac_cv_func_remove = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5
printf %s "checking for remove in -lposix... " >&6; }
if test ${ac_cv_lib_posix_remove+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lposix $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char remove ();
int
main (void)
{
return remove ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_posix_remove=yes
else $as_nop
ac_cv_lib_posix_remove=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5
printf "%s\n" "$ac_cv_lib_posix_remove" >&6; }
if test "x$ac_cv_lib_posix_remove" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
fi
fi
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
ac_fn_c_check_func "$LINENO" "shmat" "ac_cv_func_shmat"
if test "x$ac_cv_func_shmat" = xyes
then :
fi
if test $ac_cv_func_shmat = no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5
printf %s "checking for shmat in -lipc... " >&6; }
if test ${ac_cv_lib_ipc_shmat+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lipc $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char shmat ();
int
main (void)
{
return shmat ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_ipc_shmat=yes
else $as_nop
ac_cv_lib_ipc_shmat=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5
printf "%s\n" "$ac_cv_lib_ipc_shmat" >&6; }
if test "x$ac_cv_lib_ipc_shmat" = xyes
then :
X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
fi
fi
fi
# Check for libraries that X11R6 Xt/Xaw programs need.
ac_save_LDFLAGS=$LDFLAGS
test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
# check for ICE first), but we must link in the order -lSM -lICE or
# we get undefined symbols. So assume we have SM if we have ICE.
# These have to be linked with before -lX11, unlike the other
# libraries we check for below, so use a different variable.
# John Interrante, Karl Berry
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5
printf %s "checking for IceConnectionNumber in -lICE... " >&6; }
if test ${ac_cv_lib_ICE_IceConnectionNumber+y}
then :
printf %s "(cached) " >&6
else $as_nop
ac_check_lib_save_LIBS=$LIBS
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
char IceConnectionNumber ();
int
main (void)
{
return IceConnectionNumber ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"
then :
ac_cv_lib_ICE_IceConnectionNumber=yes
else $as_nop
ac_cv_lib_ICE_IceConnectionNumber=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.beam \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
printf "%s\n" "$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
if test "x$ac_cv_lib_ICE_IceConnectionNumber" = xyes
then :
X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
fi
LDFLAGS=$ac_save_LDFLAGS
fi
if test x$no_x = xyes; then
echo "You need to supply the path to the X headers and libraries with --x-includes=dir and --x-libraries=dir";
exit 1;
fi;
LIBS="${X_PRE_LIBS} ${X_LIBS} -lX11 -lXext ${LIBS} ${X_EXTRA_LIBS}"
CFLAGS="$CFLAGS $X_CFLAGS"
ac_header= ac_cache=
for ac_item in $ac_header_c_list
do
if test $ac_cache; then
ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default"
if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then
printf "%s\n" "#define $ac_item 1" >> confdefs.h
fi
ac_header= ac_cache=
elif test $ac_header; then
ac_cache=$ac_item
else
ac_header=$ac_item
fi
done
if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes
then :
printf "%s\n" "#define STDC_HEADERS 1" >>confdefs.h
fi
ac_fn_c_check_header_compile "$LINENO" "linux/hdreg.h" "ac_cv_header_linux_hdreg_h" "$ac_includes_default"
if test "x$ac_cv_header_linux_hdreg_h" = xyes
then :
printf "%s\n" "#define HAVE_LINUX_HDREG_H 1" >>confdefs.h
fi
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_path_PKG_CONFIG+y}
then :
printf %s "(cached) " >&6
else $as_nop
case $PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_path_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG
if test -n "$PKG_CONFIG"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
printf "%s\n" "$PKG_CONFIG" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
fi
if test -z "$ac_cv_path_PKG_CONFIG"; then
ac_pt_PKG_CONFIG=$PKG_CONFIG
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
printf %s "checking for $ac_word... " >&6; }
if test ${ac_cv_path_ac_pt_PKG_CONFIG+y}
then :
printf %s "(cached) " >&6
else $as_nop
case $ac_pt_PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext"
printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
if test -n "$ac_pt_PKG_CONFIG"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
printf "%s\n" "$ac_pt_PKG_CONFIG" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
fi
if test "x$ac_pt_PKG_CONFIG" = x; then
PKG_CONFIG=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
PKG_CONFIG=$ac_pt_PKG_CONFIG
fi
else
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
fi
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=0.9.0
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
printf %s "checking pkg-config is at least version $_pkg_min_version... " >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
PKG_CONFIG=""
fi
fi
pkg_failed=no
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for imlib2" >&5
printf %s "checking for imlib2... " >&6; }
if test -n "$IMLIB2_CFLAGS"; then
pkg_cv_IMLIB2_CFLAGS="$IMLIB2_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2\""; } >&5
($PKG_CONFIG --exists --print-errors "imlib2") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_IMLIB2_CFLAGS=`$PKG_CONFIG --cflags "imlib2" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$IMLIB2_LIBS"; then
pkg_cv_IMLIB2_LIBS="$IMLIB2_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2\""; } >&5
($PKG_CONFIG --exists --print-errors "imlib2") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_IMLIB2_LIBS=`$PKG_CONFIG --libs "imlib2" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
IMLIB2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "imlib2" 2>&1`
else
IMLIB2_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "imlib2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$IMLIB2_PKG_ERRORS" >&5
as_fn_error $? "Package requirements (imlib2) were not met:
$IMLIB2_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables IMLIB2_CFLAGS
and IMLIB2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables IMLIB2_CFLAGS
and IMLIB2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see .
See \`config.log' for more details" "$LINENO" 5; }
else
IMLIB2_CFLAGS=$pkg_cv_IMLIB2_CFLAGS
IMLIB2_LIBS=$pkg_cv_IMLIB2_LIBS
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
fi
YELLOW="\\033\\1331;33m"
RESET="\\033\\1330m"
build_gkhdplop="yes"
# Check whether --enable-gkrellm was given.
if test ${enable_gkrellm+y}
then :
enableval=$enable_gkrellm; if test "x$enableval" = "xno" ; then
build_gkhdplop="no"
echo you disabled the gkhdplop gkrellm plugin
fi
else $as_nop
build_gkhdplop="yes"
fi
GKHDPLOP=""
if test "x$build_gkhdplop" = "xno"; then
echo gkhdplop disabled...
else
echo building with GKHDPLOP, checking for gtk2..
pkg_modules="gtk+-2.0 >= 2.0.0"
pkg_failed=no
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $pkg_modules" >&5
printf %s "checking for $pkg_modules... " >&6; }
if test -n "$PACKAGE_CFLAGS"; then
pkg_cv_PACKAGE_CFLAGS="$PACKAGE_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$pkg_modules\""; } >&5
($PKG_CONFIG --exists --print-errors "$pkg_modules") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PACKAGE_CFLAGS=`$PKG_CONFIG --cflags "$pkg_modules" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$PACKAGE_LIBS"; then
pkg_cv_PACKAGE_LIBS="$PACKAGE_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$pkg_modules\""; } >&5
($PKG_CONFIG --exists --print-errors "$pkg_modules") 2>&5
ac_status=$?
printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PACKAGE_LIBS=`$PKG_CONFIG --libs "$pkg_modules" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
PACKAGE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$pkg_modules" 2>&1`
else
PACKAGE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$pkg_modules" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$PACKAGE_PKG_ERRORS" >&5
as_fn_error $? "Package requirements ($pkg_modules) were not met:
$PACKAGE_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables PACKAGE_CFLAGS
and PACKAGE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
printf "%s\n" "no" >&6; }
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables PACKAGE_CFLAGS
and PACKAGE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see .
See \`config.log' for more details" "$LINENO" 5; }
else
PACKAGE_CFLAGS=$pkg_cv_PACKAGE_CFLAGS
PACKAGE_LIBS=$pkg_cv_PACKAGE_LIBS
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
printf "%s\n" "yes" >&6; }
fi
GTK2_CFLAGS=$PACKAGE_CFLAGS;
GTK2_LIBS=$PACKAGE_LIBS;
SAVECPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CFLAGS $GTK2_CFLAGS"
for ac_header in gkrellm2/gkrellm.h
do :
ac_fn_c_check_header_compile "$LINENO" "gkrellm2/gkrellm.h" "ac_cv_header_gkrellm2_gkrellm_h" "$ac_includes_default"
if test "x$ac_cv_header_gkrellm2_gkrellm_h" = xyes
then :
printf "%s\n" "#define HAVE_GKRELLM2_GKRELLM_H 1" >>confdefs.h
ok=1
else $as_nop
ok=0
fi
done
if test "x$ok" = "x0"; then
echo -e "${YELLOW}gkrellm2/gkrellm.h header not found or unusable${RESET}... cannot build gkhdplop.so"
build_gkhdplop="no"
else
GKHDPLOP="gkhdplop.so"
fi
CPPFLAGS="$SAVECPPFLAGS"
fi
ac_config_files="$ac_config_files Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
_ACEOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes: double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
) |
sed '
/^ac_cv_env_/b end
t clear
:clear
s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/
t end
s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
if test "x$cache_file" != "x/dev/null"; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
printf "%s\n" "$as_me: updating cache $cache_file" >&6;}
if test ! -f "$cache_file" || test -h "$cache_file"; then
cat confcache >"$cache_file"
else
case $cache_file in #(
*/* | ?:*)
mv -f confcache "$cache_file"$$ &&
mv -f "$cache_file"$$ "$cache_file" ;; #(
*)
mv -f confcache "$cache_file" ;;
esac
fi
fi
else
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
printf %s "checking that generated files are newer than configure... " >&6; }
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5
printf "%s\n" "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
else
am__EXEEXT_TRUE='#'
am__EXEEXT_FALSE=
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;}
as_write_fail=0
cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
as_nop=:
if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else $as_nop
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
# Reset variables that may have inherited troublesome values from
# the environment.
# IFS needs to be set, to space, tab, and newline, in precisely that order.
# (If _AS_PATH_WALK were called with IFS unset, it would have the
# side effect of setting IFS to empty, thus disabling word splitting.)
# Quoting is to prevent editors from complaining about space-tab.
as_nl='
'
export as_nl
IFS=" "" $as_nl"
PS1='$ '
PS2='> '
PS4='+ '
# Ensure predictable behavior from utilities with locale-dependent output.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# We cannot yet rely on "unset" to work, but we need these variables
# to be unset--not just set to an empty or harmless value--now, to
# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct
# also avoids known problems related to "unset" and subshell syntax
# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
do eval test \${$as_var+y} \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
# Ensure that fds 0, 1, and 2 are open.
if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
if (exec 3>&2) ; then :; else exec 2>/dev/null; fi
# The user is always right.
if ${PATH_SEPARATOR+false} :; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
test -r "$as_dir$0" && as_myself=$as_dir$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
printf "%s\n" "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else $as_nop
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else $as_nop
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# Determine whether it's possible to make 'echo' print without a newline.
# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
# for compatibility with existing Makefiles.
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
# For backward compatibility with old third-party macros, we provide
# the shell variables $as_echo and $as_echo_n. New code should use
# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
as_echo='printf %s\n'
as_echo_n='printf %s'
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
_ASEOF
test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by wmhdplop $as_me 0.9.12, which was
generated by GNU Autoconf 2.71. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
_ACEOF
case $ac_config_files in *"
"*) set x $ac_config_files; shift; ac_config_files=$*;;
esac
case $ac_config_headers in *"
"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
esac
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration. Unless the files
and actions are specified as TAGs, all are instantiated by default.
Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to ."
_ACEOF
ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"`
ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"`
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config='$ac_cs_config_escaped'
ac_cs_version="\\
wmhdplop config.status 0.9.12
configured by $0, generated by GNU Autoconf 2.71,
with options \\"\$ac_cs_config\\"
Copyright (C) 2021 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
MKDIR_P='$MKDIR_P'
AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
--*=)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
printf "%s\n" "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
printf "%s\n" "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
'') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
printf "%s\n" "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
export CONFIG_SHELL
exec "\$@"
fi
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
printf "%s\n" "$ac_log"
} >&5
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files
test ${CONFIG_HEADERS+y} || CONFIG_HEADERS=$config_headers
test ${CONFIG_COMMANDS+y} || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp= ac_tmp=
trap 'exit_status=$?
: "${ac_tmp:=$tmp}"
{ test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
{
echo "cat >conf$$subs.awk <<_ACEOF" &&
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
s/^/S["/; s/!.*/"]=/
p
g
s/^[^!]*!//
:repl
t repl
s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
n
b repl
:more1
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
b
:more2
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t delim
' >$CONFIG_STATUS || ac_write_fail=1
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
}
{
line = $ 0
nfields = split(line, field, "@")
substed = 0
len = length(field[1])
for (i = 2; i < nfields; i++) {
key = field[i]
keylen = length(key)
if (S_is_set[key]) {
value = S[key]
line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
len += length(value) + length(field[++i])
substed = 1
} else
len += 1 + keylen
}
print line
}
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
h
s///
s/^/:/
s/[ ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[ ]*\).*/\1/
G
s/\n//
s/^[^=]*=[ ]*$//
}'
fi
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
# Transform confdefs.h into an awk script `defines.awk', embedded as
# here-document in config.status, that substitutes the proper values into
# config.h.in to produce config.h.
# Create a delimiter string that does not exist in confdefs.h, to ease
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
if test -z "$ac_tt"; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any. Preserve backslash
# newline sequences.
ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
sed -n '
s/.\{148\}/&'"$ac_delim"'/g
t rset
:rset
s/^[ ]*#[ ]*define[ ][ ]*/ /
t def
d
:def
s/\\$//
t bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3"/p
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
d
:bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3\\\\\\n"\\/p
t cont
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
t cont
d
:cont
n
s/.\{148\}/&'"$ac_delim"'/g
t clear
:clear
s/\\$//
t bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/"/p
d
:bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
b cont
' >$CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
for (key in D) D_is_set[key] = 1
FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
line = \$ 0
split(line, arg, " ")
if (arg[1] == "#") {
defundef = arg[2]
mac1 = arg[3]
} else {
defundef = substr(arg[1], 2)
mac1 = arg[2]
}
split(mac1, mac2, "(") #)
macro = mac2[1]
prefix = substr(line, 1, index(line, defundef) - 1)
if (D_is_set[macro]) {
# Preserve the white space surrounding the "#".
print prefix "define", macro P[macro] D[macro]
next
} else {
# Replace #undef with comments. This is necessary, for example,
# in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
if (defundef == "undef") {
print "/*", prefix defundef, macro, "*/"
next
}
}
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input='Generated from '`
printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
printf "%s\n" "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
case $configure_input in #(
*\&* | *\|* | *\\* )
ac_sed_conf_input=`printf "%s\n" "$configure_input" |
sed 's/[\\\\&|]/\\\\&/g'`;; #(
*) ac_sed_conf_input=$configure_input;;
esac
case $ac_tag in
*:-:* | *:-) cat >"$ac_tmp/stdin" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
ac_MKDIR_P=$MKDIR_P
case $MKDIR_P in
[\\/$]* | ?:[\\/]* ) ;;
*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
>$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
"$ac_tmp/out"`; test -z "$ac_out"; } &&
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$ac_tmp/stdin"
case $ac_file in
-) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
*) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
if test x"$ac_file" != x-; then
{
printf "%s\n" "/* $configure_input */" >&1 \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
} >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
printf "%s\n" "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
printf "%s\n" "/* $configure_input */" >&1 \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$_am_arg" : 'X\(//\)[^/]' \| \
X"$_am_arg" : 'X\(//\)$' \| \
X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
printf "%s\n" "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
# TODO: see whether this extra hack can be removed once we start
# requiring Autoconf 2.70 or later.
case $CONFIG_FILES in #(
*\'*) :
eval set x "$CONFIG_FILES" ;; #(
*) :
set x $CONFIG_FILES ;; #(
*) :
;;
esac
shift
# Used to flag and report bootstrapping failures.
am_rc=0
for am_mf
do
# Strip MF so we end up with the name of the file.
am_mf=`printf "%s\n" "$am_mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile which includes
# dependency-tracking related rules and includes.
# Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
|| continue
am_dirpart=`$as_dirname -- "$am_mf" ||
$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$am_mf" : 'X\(//\)[^/]' \| \
X"$am_mf" : 'X\(//\)$' \| \
X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$am_mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
am_filepart=`$as_basename -- "$am_mf" ||
$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
X"$am_mf" : 'X\(//\)$' \| \
X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X/"$am_mf" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
{ echo "$as_me:$LINENO: cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles" >&5
(cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } || am_rc=$?
done
if test $am_rc -ne 0; then
{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "Something went wrong bootstrapping makefile fragments
for automatic dependency tracking. If GNU make was not used, consider
re-running the configure script with MAKE=\"gmake\" (or whatever is
necessary). You can also try re-running configure with the
'--disable-dependency-tracking' option to at least be able to build
the package (albeit without support for automatic dependency tracking).
See \`config.log' for more details" "$LINENO" 5; }
fi
{ am_dirpart=; unset am_dirpart;}
{ am_filepart=; unset am_filepart;}
{ am_mf=; unset am_mf;}
{ am_rc=; unset am_rc;}
rm -f conftest-deps.mk
}
;;
esac
done # for ac_tag
as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
echo "- - - - - - - - - - - - - - - -"
echo -e "${YELLOW}wmhdplop will be built${RESET}"
if test "x$build_gkhdplop" = "xno"; then
echo -e "${YELLOW}gkhdplop.so will NOT be built${RESET}"
else
echo -e "${YELLOW}gkhdplop.so will be built${RESET}"
echo "Check that the plugin is working properly before installing it with:"
echo " gkrellm -p ./gkhdplop.so"
echo "and then install the gkrellm plugin with:"
echo " mv ./gkhdplop.so ~/.gkrellm2/plugins"
fi
wmhdplop-0.9.12/README 0000644 0002074 0002074 00000002133 13655747211 011250 0000000 0000000
------------------------------------------------
wmdhplop & gkhdplop
------------------------------------------------
wmhdplop is yet another monitoring applet. This one watches hard-drive
activity.
gkhdplop is the port of wmhdplop into a gkrellm2 plugin.
Compilation:
-----------
./configure && make && make install
Note that this applet uses Imlib2, and requires the script imlib2-config
to be in the path. It won't compile on anything but a recent linux kernel
(2.4.20 or better, 2.6 is also supported).
gkhdplop requires gtk2 and gkrellm2.
Usage:
------
wmhdplop -h for the list of options. If you have the hddtemp daemon running,
then wmhdplop may use it to display the temperature of your hard-drives.
The monitored hard-drive or partition can be changed with the mouse wheel.
gkhdplop:
---------
To install the plugin:
mv gkhdplop.so ~/.gkrellm2/plugins
The configuration is made by clicking with the right button on the plugin.
BUG: gkhdplop will close gkrellm if no default .ttf font is found (look at
the messages in console).
wmhdplop-0.9.12/util.h 0000644 0002074 0002074 00000004300 13655747211 011514 0000000 0000000 #ifndef UTIL_H
#define UTIL_H
#include
#include
#include
#ifndef MAX
# define MAX(x,y) ((x)>(y)?(x):(y))
#endif
#ifndef MIN
# define MIN(x,y) ((x)<(y)?(x):(y))
#endif
#ifndef SQR
# define SQR(a) ((a)*(a))
#endif
#ifndef ABS
# define ABS(a) ((a)>0?(a):-(a))
#endif
#define ALLOC_OBJ(p) { p = calloc(1, sizeof(*p)); assert(p);}
#define FREE_OBJ(p) free(p);
#define ALLOC_VEC(p, n) { p = calloc(n, sizeof(*(p))); assert(p); }
#define SET_VEC(p, v, i0, i1) { int _i; \
for (_i = (i0); _i < (i1); _i++) p[_i] = v; }
#define FREE_VEC(p) free(p);
#define ALLOC_ARR(v,nl,nc) \
{ int __i; v = calloc(nl,sizeof(*(v))); assert(v); \
v[0]=calloc((nc)*(nl), sizeof(**(v))); assert((v)[0]); \
for (__i=1; __i < nl; ++__i) (v)[__i] = (v)[__i-1] + nc; }
#define FREE_ARR(p) { free(p[0]); free(p); }
#define BASE_ARR(p) (p[0])
#ifndef NO_BLAHBLAH
# define BLAHBLAH(n,x) if (Prefs.verbosity >= n) { x; fflush(stdout); }
#else
# define BLAHBLAH(n,x)
#endif
#define ONLY_ONCE(x) { static int __cnt = 0; if (__cnt++==0) { x;} }
#define ONLY_NTIMES(n,x) { static int __cnt = 0; if (__cnt++= (xmin) && (x) <= (xmax) && (y) >= (ymin) && (y) <= (ymax))
char *str_dup(const char *s);
int str_is_empty(const char *s);
char *str_multi_str(const char *src, const char **keys, int nb_keys, int *key_idx);
char *str_multi_substitute(const char *src, const char **keys, const char **substitutions, int nkeys);
char *str_substitute(const char *src, const char *key, const char *substitution);
char *shell_quote(const char *src);
unsigned str_hash(const unsigned char *s, int max_len);
unsigned char chr_noaccent_tolower(unsigned char c);
void str_noaccent_tolower(unsigned char *s);
unsigned char *str_noaccent_casestr(const unsigned char *meule, const unsigned char *aiguille);
char *str_printf(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
char *str_fget_line(FILE *f);
void str_trim(unsigned char *s);
typedef struct strlist {
char *s;
struct strlist *next;
} strlist;
strlist *strlist_ins(strlist *head, const char *s);
#endif
wmhdplop-0.9.12/INSTALL 0000644 0002074 0002074 00000036626 14302112222 011411 0000000 0000000 Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2017, 2020-2021 Free
Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell command './configure && make && make install'
should configure, build, and install this package. The following
more-detailed instructions are generic; see the 'README' file for
instructions specific to this package. Some packages provide this
'INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The 'configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a 'Makefile' in each directory of the package.
It may also create one or more '.h' files containing system-dependent
definitions. Finally, it creates a shell script 'config.status' that
you can run in the future to recreate the current configuration, and a
file 'config.log' containing compiler output (useful mainly for
debugging 'configure').
It can also use an optional file (typically called 'config.cache' and
enabled with '--cache-file=config.cache' or simply '-C') that saves the
results of its tests to speed up reconfiguring. Caching is disabled by
default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try
to figure out how 'configure' could check whether to do them, and mail
diffs or instructions to the address given in the 'README' so they can
be considered for the next release. If you are using the cache, and at
some point 'config.cache' contains results you don't want to keep, you
may remove or edit it.
The file 'configure.ac' (or 'configure.in') is used to create
'configure' by a program called 'autoconf'. You need 'configure.ac' if
you want to change it or regenerate 'configure' using a newer version of
'autoconf'.
The simplest way to compile this package is:
1. 'cd' to the directory containing the package's source code and type
'./configure' to configure the package for your system.
Running 'configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type 'make' to compile the package.
3. Optionally, type 'make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type 'make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the 'make install' phase executed with root
privileges.
5. Optionally, type 'make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior 'make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing 'make clean'. To also remove the
files that 'configure' created (so you can compile the package for
a different kind of computer), type 'make distclean'. There is
also a 'make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type 'make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide 'make
distcheck', which can by used by developers to test that all other
targets like 'make install' and 'make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the 'configure' script does not know about. Run './configure --help'
for details on some of the pertinent environment variables.
You can give 'configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here is
an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU 'make'. 'cd' to the
directory where you want the object files and executables to go and run
the 'configure' script. 'configure' automatically checks for the source
code in the directory that 'configure' is in and in '..'. This is known
as a "VPATH" build.
With a non-GNU 'make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use 'make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple '-arch' options to the
compiler but only a single '-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the 'lipo' tool if you have problems.
Installation Names
==================
By default, 'make install' installs the package's commands under
'/usr/local/bin', include files under '/usr/local/include', etc. You
can specify an installation prefix other than '/usr/local' by giving
'configure' the option '--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like '--bindir=DIR' to specify different values for particular
kinds of files. Run 'configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the default
for these options is expressed in terms of '${prefix}', so that
specifying just '--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to 'configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
'make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, 'make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
'${prefix}'. Any directories that were specified during 'configure',
but not in terms of '${prefix}', must each be overridden at install time
for the entire installation to be relocated. The approach of makefile
variable overrides for each directory variable is required by the GNU
Coding Standards, and ideally causes no recompilation. However, some
platforms have known limitations with the semantics of shared libraries
that end up requiring recompilation when using this method, particularly
noticeable in packages that use GNU Libtool.
The second method involves providing the 'DESTDIR' variable. For
example, 'make install DESTDIR=/alternate/directory' will prepend
'/alternate/directory' before all installation names. The approach of
'DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of '${prefix}'
at 'configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving 'configure' the
option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
Some packages pay attention to '--enable-FEATURE' options to
'configure', where FEATURE indicates an optional part of the package.
They may also pay attention to '--with-PACKAGE' options, where PACKAGE
is something like 'gnu-as' or 'x' (for the X Window System). The
'README' should mention any '--enable-' and '--with-' options that the
package recognizes.
For packages that use the X Window System, 'configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the 'configure' options '--x-includes=DIR' and
'--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of 'make' will be. For these packages, running './configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with 'make V=1'; while running './configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with 'make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC
is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX 'make' updates targets which have the same timestamps as their
prerequisites, which makes it generally unusable when shipped generated
files such as 'configure' are involved. Use GNU 'make' instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its '' header file. The option '-nodtk' can be used as a
workaround. If GNU CC is not installed, it is therefore recommended to
try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put '/usr/ucb' early in your 'PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in '/usr/bin'. So, if you need '/usr/ucb'
in your 'PATH', put it _after_ '/usr/bin'.
On Haiku, software installed for all users goes in '/boot/common',
not '/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features 'configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, 'configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
'--build=TYPE' option. TYPE can either be a short name for the system
type, such as 'sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file 'config.sub' for the possible values of each field. If
'config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option '--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with '--host=TYPE'.
Sharing Defaults
================
If you want to set default values for 'configure' scripts to share,
you can create a site shell script called 'config.site' that gives
default values for variables like 'CC', 'cache_file', and 'prefix'.
'configure' looks for 'PREFIX/share/config.site' if it exists, then
'PREFIX/etc/config.site' if it exists. Or, you can set the
'CONFIG_SITE' environment variable to the location of the site script.
A warning: not all 'configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to 'configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the 'configure' command line, using 'VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified 'gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
Autoconf limitation. Until the limitation is lifted, you can use this
workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
'configure' Invocation
======================
'configure' recognizes the following options to control how it
operates.
'--help'
'-h'
Print a summary of all of the options to 'configure', and exit.
'--help=short'
'--help=recursive'
Print a summary of the options unique to this package's
'configure', and exit. The 'short' variant lists options used only
in the top level, while the 'recursive' variant lists options also
present in any nested packages.
'--version'
'-V'
Print the version of Autoconf used to generate the 'configure'
script, and exit.
'--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally 'config.cache'. FILE defaults to '/dev/null' to
disable caching.
'--config-cache'
'-C'
Alias for '--cache-file=config.cache'.
'--quiet'
'--silent'
'-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to '/dev/null' (any error
messages will still be shown).
'--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
'configure' can determine that directory automatically.
'--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names:: for
more details, including other options available for fine-tuning the
installation locations.
'--no-create'
'-n'
Run the configure checks, but stop before creating any output
files.
'configure' also accepts some other, not widely useful, options. Run
'configure --help' for more details.
wmhdplop-0.9.12/compile 0000755 0002074 0002074 00000016350 14302112222 011726 0000000 0000000 #! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
wmhdplop-0.9.12/missing 0000755 0002074 0002074 00000015336 14302112222 011752 0000000 0000000 #! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to ."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=https://www.perl.org/
flex_URL=https://github.com/westes/flex
gnu_software_URL=https://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
wmhdplop-0.9.12/wmhdplop.1 0000644 0002074 0002074 00000001335 13655747211 012307 0000000 0000000 .TH WMHDPLOP 1 "June 25, 2004"
.SH NAME
wmhdplop \- hard drive monitor dockapp
.SH SYNOPSIS
.B wmhdplop
.RI [ options ]
.SH DESCRIPTION
This manual page documents briefly the
.B wmhdplop
command.
This manual page was written for the Debian distribution
because the original program does not have a manual page.
.PP
\fBwmhdplop\fP is a program that monitors hard drive activity and
displays it graphically in a dockapp.
.SH OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (`-').
Please run wmhdplop \-h to get a summary of options.
.SH AUTHOR
This manual page was written by G\[:u]rkan Seng\[:u]n ,
for the Debian project (but may be used by others).
wmhdplop-0.9.12/devnames.h 0000644 0002074 0002074 00000002164 13655747211 012347 0000000 0000000 #ifndef DEVNAMES_H
#define DEVNAMES_H
#include "util.h"
#define IS_PARTITION(DL) ((DL)->part_id!=0)
typedef struct DiskList {
char *name, *dev_path;
unsigned major, minor;
int hd_id, part_id; /* part_id = 0 for disks */
int enable_hddtemp;
long nr, nw, touched_r, touched_w;
struct DiskList *next;
} DiskList;
int is_displayed(int hd_id, int part_id); /* wmhdplop.c function */
int short_name_for_device(unsigned major, unsigned minor, char *name);
const char *stripdev(const char *s);
DiskList *find_dev(unsigned major, unsigned minor);
DiskList *find_dev_by_name(const char *name);
DiskList *find_id(int hd_id, int part_id);
DiskList *next_hd_in_list(DiskList *current);
DiskList *first_hd_in_list();
DiskList *first_dev_in_list();
int nb_hd_in_list();
int nb_dev_in_list();
int is_partition(unsigned major, unsigned minor);
int add_device_by_name(const char *devname, const char *mtab_name);
int add_device_by_id(unsigned major, unsigned minor, const char *mtab_name);
void add_swap(const char *swapdev);
int device_info(unsigned major, unsigned minor, char *name, int *hd_id, int *part_id);
strlist *swap_list();
#endif
wmhdplop-0.9.12/devnames.c 0000644 0002074 0002074 00000017147 13655747211 012351 0000000 0000000 #include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "global.h"
#include "devnames.h"
static DiskList *dlist = NULL;
const char *stripdev(const char *s) {
if (strncmp(s,"/dev",4) == 0) s+= 4;
if (s[0] == '/') s++;
return s;
}
DiskList *find_dev(unsigned major, unsigned minor) {
DiskList *dl;
for (dl = dlist; dl; dl = dl->next) {
if (dl->major == major && dl->minor == minor) return dl;
}
return NULL;
}
DiskList *find_id(int hd_id, int part_id) {
DiskList *dl;
for (dl = dlist; dl; dl = dl->next) {
if (((dl->hd_id == hd_id) || hd_id == -1) &&
((dl->part_id == part_id) || part_id == -1)) return dl;
}
return NULL;
}
/*
DiskList *find_dev_by_name(const char *name) {
DiskList *dl;
const char *sname = stripdev(name);
for (dl = dlist; dl; dl = dl->next) {
if (strcmp(sname, dl->name)==0) return dl;
}
return NULL;
}*/
DiskList *next_hd_in_list(DiskList *prev) {
DiskList *dl = (prev ? prev->next : dlist);
while (dl && IS_PARTITION(dl)) dl = dl->next;
return dl;
}
DiskList *first_hd_in_list() {
return next_hd_in_list(NULL);
}
DiskList *first_dev_in_list() {
return dlist;
}
int nb_hd_in_list() {
int i=0;
DiskList *dl;
for (dl = first_hd_in_list(); dl; dl = next_hd_in_list(dl)) ++i;
return i;
}
int nb_dev_in_list() {
int i=0;
DiskList *dl;
for (dl = dlist; dl; dl = dl->next) ++i;
return i;
}
/*int is_partition_name(const char *name) {
int l = strlen(name);
if (l && name[l-1] >= '0' && name[l-1] <= '9') return 1;
return 0;
}
*/
static const char *to_num_(unsigned minor) {
static char id[16];
if (minor == 0) return "";
else snprintf(id,16,"%d",minor);
return id;
}
int device_info(unsigned major, unsigned minor, char *name, int *hd_id, int *part_id) {
switch(major) {
#ifdef SCSI_DISK0_MAJOR
case (SCSI_DISK0_MAJOR):
#else
case (SCSI_DISK_MAJOR):
#endif
if (name) sprintf(name, "sd%c%s", "abcdefghijklmnop"[(minor)/16], to_num_(minor%16));
if (hd_id) *hd_id = (minor)/16;
if (part_id) *part_id = minor%16;
return 1;
case IDE0_MAJOR:
if (name) sprintf(name, "hd%c%s", "ab"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 100 + (minor)/64;
if (part_id) *part_id = minor%64;
return 2;
case IDE1_MAJOR:
if (name) sprintf(name, "hd%c%s", "cd"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 200 + (minor)/64;
if (part_id) *part_id = minor%64;
return 3;
#ifdef IDE2_MAJOR
case IDE2_MAJOR:
if (name) sprintf(name, "hd%c%s", "ef"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 300 + (minor)/64;
if (part_id) *part_id = minor%64;
return 4;
#endif
#ifdef IDE3_MAJOR
case IDE3_MAJOR:
if (name) sprintf(name, "hd%c%s", "gh"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 400 + (minor)/64;
if (part_id) *part_id = minor%64;
return 5;
#endif
#ifdef IDE4_MAJOR
case IDE4_MAJOR:
if (name) sprintf(name, "hd%c%s", "ij"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 400 + (minor)/64;
if (part_id) *part_id = minor%64;
return 6;
#endif
#ifdef IDE5_MAJOR
case IDE5_MAJOR:
if (name) sprintf(name, "hd%c%s", "kl"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 400 + (minor)/64;
if (part_id) *part_id = minor%64;
return 7;
#endif
#ifdef IDE6_MAJOR
case IDE6_MAJOR:
if (name) sprintf(name, "hd%c%s", "mn"[(minor)/64], to_num_(minor%64));
if (hd_id) *hd_id = 400 + (minor)/64;
if (part_id) *part_id = minor%64;
return 8;
#endif
#ifdef MD_MAJOR
case (MD_MAJOR):
if (name) sprintf(name, "md%s", to_num_(minor));
if (hd_id) *hd_id = 400 + minor;
if (part_id) *part_id = 0;
return 9;
#endif
#ifdef BLOCK_EXT_MAJOR
case (BLOCK_EXT_MAJOR):
if (name) sprintf(name, "nvme0n%cp%s", "0123456789"[(minor/16)], to_num_(minor));
if (hd_id) *hd_id = 400 + minor;
if (part_id) *part_id = 0;
return 10;
#endif
}
if (name) *name = 0;
if (hd_id) *hd_id = -1;
if (part_id) *part_id = -1;
return 0;
}
int short_name_for_device(unsigned major, unsigned minor, char *name) {
return device_info(major,minor,name,NULL,NULL);
}
int is_partition(unsigned major, unsigned minor) {
int part_id;
if (!device_info(major,minor,NULL,NULL,&part_id)) return 0;
return (part_id != 0);
}
int device_id_from_name(const char *devname__, unsigned *pmajor, unsigned *pminor) {
if (strlen(devname__)>=512) return -1;
char *devname_, devname[512];
devname_ = str_substitute(devname__, "/dev/mapper", "/dev");
struct stat stat_buf;
BLAHBLAH(1,printf("looking for %s in /dev..\n", devname_));
if (devname_[0] != '/') snprintf(devname,512,"/dev/%s", devname_);
else snprintf(devname,512,"%s",devname_);
free(devname_); devname_ = 0;
if (lstat(devname,&stat_buf)) { BLAHBLAH(1,perror(devname)); return -1; }
if (S_ISLNK(stat_buf.st_mode)) {
devname_ = realpath(devname, NULL);
if(!devname_) { BLAHBLAH(1,perror(devname)); return -1; }
strncpy(devname, devname_, 512); devname[511] = 0;
free(devname_);
if (stat(devname,&stat_buf)) { BLAHBLAH(1,perror(devname)); return -1; }
}
if (!S_ISBLK(stat_buf.st_mode)) {
fprintf(stderr, "%s is not a block device..\n", devname);
return -2;
}
*pmajor = major(stat_buf.st_rdev);
*pminor = minor(stat_buf.st_rdev);
return 0;
}
/* add a hard-drive if it is a regular ide/scsi/md disk/partition, or return NULL */
static DiskList *create_device(unsigned major, unsigned minor, const char *mtab_name) {
DiskList *dl;
char dev_path[512];
ALLOC_OBJ(dl);
if (mtab_name && strlen(mtab_name)) dl->name = strdup(mtab_name);
else {
char s[512]; short_name_for_device(major,minor,s); dl->name = strdup(s);
}
BLAHBLAH(1, printf("create_device(major=%d, minor=%d, mtab_name=%s) : name=%s\n", major,minor,mtab_name,dl->name));
dl->major = major; dl->minor = minor;
if (device_info(major,minor,dev_path,&dl->hd_id,&dl->part_id) == 0) {
BLAHBLAH(1, printf("(%d,%d) is not a known disc type..\n", major,minor));
free(dl); return NULL;
}
dl->dev_path = malloc(strlen(dev_path)+6); assert(dl->dev_path);
sprintf(dl->dev_path, "/dev/%s", dev_path);
dl->next = NULL;
if (dl->part_id == 0)
dl->enable_hddtemp = 1;
return dl;
}
/* add a device (after checking that it is a known device type) */
int add_device_by_name(const char *devname, const char *mtab_name) {
unsigned major, minor;
BLAHBLAH(1,printf("add_device_by_name(%s,%s)\n", devname, mtab_name));
if (device_id_from_name(devname, &major, &minor) != 0) return -1;
return add_device_by_id(major,minor,mtab_name);
}
/* add a device (after checking that it is a known device type) */
int add_device_by_id(unsigned major, unsigned minor, const char *mtab_name) {
DiskList *dl, *next, *prev;
BLAHBLAH(1,printf("add_device_by_id(%d,%d,%s)\n", major, minor,mtab_name));
/* already known ? */
if (find_dev(major,minor)) return -1;
/* check for known ide/scsi/md disks and then create */
dl = create_device(major, minor, mtab_name); if (!dl) return -1;
for (next = dlist, prev = NULL; next; next=next->next) {
if (dl->hd_id > next->hd_id || (dl->hd_id == next->hd_id && dl->part_id > next->part_id)) break;
prev = next;
}
if (prev == NULL) {
dl->next = dlist; dlist = dl;
} else {
dl->next = prev->next; prev->next = dl;
}
return 0;
}
strlist *swaplst = NULL;
void add_swap(const char *swapdev) {
swaplst = strlist_ins(swaplst, swapdev);
}
strlist *swap_list() {
return swaplst;
}
wmhdplop-0.9.12/NEWS 0000644 0002074 0002074 00000000212 13655747211 011063 0000000 0000000 I won't fill this file, please take a look at the ChangeLog
--- 03/12/03 ------------------------
wmhdplop 0.9 is ready for the desktop.
wmhdplop-0.9.12/install-sh 0000755 0002074 0002074 00000035776 14302112222 012371 0000000 0000000 #!/bin/sh
# install - install a program, script, or datafile
scriptversion=2020-11-14.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
tab=' '
nl='
'
IFS=" $tab$nl"
# Set DOITPROG to "echo" to test this script.
doit=${DOITPROG-}
doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_mkdir=
# Desired mode of installed file.
mode=0755
# Create dirs (including intermediate dirs) using mode 755.
# This is like GNU 'install' as of coreutils 8.32 (2020).
mkdir_umask=22
backupsuffix=
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-p pass -p to $cpprog.
-s $stripprog installed files.
-S SUFFIX attempt to back up existing files, with suffix SUFFIX.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
By default, rm is invoked with -f; when overridden with RMPROG,
it's up to you to specify -f if you want it.
If -S is not specified, no backups are attempted.
Email bug reports to bug-automake@gnu.org.
Automake home page: https://www.gnu.org/software/automake/
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-p) cpprog="$cpprog -p";;
-s) stripcmd=$stripprog;;
-S) backupsuffix="$2"
shift;;
-t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
# Don't chown directories that already exist.
if test $dstdir_status = 0; then
chowncmd=""
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename.
if test -d "$dst"; then
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dstbase=`basename "$src"`
case $dst in
*/) dst=$dst$dstbase;;
*) dst=$dst/$dstbase;;
esac
dstdir_status=0
else
dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
case $dstdir in
*/) dstdirslash=$dstdir;;
*) dstdirslash=$dstdir/;;
esac
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
# The $RANDOM variable is not portable (e.g., dash). Use it
# here however when possible just to lower collision chance.
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap '
ret=$?
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
exit $ret
' 0
# Because "mkdir -p" follows existing symlinks and we likely work
# directly in world-writeable /tmp, make sure that the '$tmpdir'
# directory is successfully created first before we actually test
# 'mkdir -p'.
if (umask $mkdir_umask &&
$mkdirprog $mkdir_mode "$tmpdir" &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
test_tmpdir="$tmpdir/a"
ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
trap '' 0;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
oIFS=$IFS
IFS=/
set -f
set fnord $dstdir
shift
set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=${dstdirslash}_inst.$$_
rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask &&
{ test -z "$stripcmd" || {
# Create $dsttmp read-write so that cp doesn't create it read-only,
# which would cause strip to fail.
if test -z "$doit"; then
: >"$dsttmp" # No need to fork-exec 'touch'.
else
$doit touch "$dsttmp"
fi
}
} &&
$doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# If $backupsuffix is set, and the file being installed
# already exists, attempt a backup. Don't worry if it fails,
# e.g., if mv doesn't support -f.
if test -n "$backupsuffix" && test -f "$dst"; then
$doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
fi
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
wmhdplop-0.9.12/dockapp_imlib2.h 0000644 0002074 0002074 00000003001 13717260551 013407 0000000 0000000 #ifndef DOCKAPP_IMLIB2_H
#define DOCKAPP_IMLIB2_H
#include
#include
#ifdef GKRELLM
#include
#endif
/*
#ifndef GKRELLM
#define DOCK_WIDTH 64
#else
#define DOCK_WIDTH 60
#endif
#define DOCK_HEIGHT DOCK_WIDTH
*/
typedef struct {
Display *display;
Window normalwin, iconwin, rootwin;
int iconwin_mapped, normalwin_mapped;
Window win; /* either normalwin or iconwin */
Visual *visual;
Colormap colormap;
int depth, screennum;
Imlib_Image bg, img; /* background picture, and "work" picture */
unsigned x0,y0,w,h; /* pos & dimensions of the "work" area */
unsigned win_width, win_height; /* size of dockapps (DOCK_WIDTH x DOCK_HEIGHT) */
Atom atom_WM_DELETE_WINDOW, atom_WM_PROTOCOLS;
} DockImlib2;
#define DOCKPREF_DISPLAY 1
#define DOCKPREF_GEOMETRY 2
typedef struct {
char **argv; int argc; /* this should be always set */
int flags; /* combination of DOCKPREF_xxx */
char *display;
char *geometry;
int dockapp_size;
} DockImlib2Prefs;
#define DOCKIMLIB2_VERSION "0.9.0"
#ifndef GKRELLM
DockImlib2* dockimlib2_setup(int x0, int y0, int w, int h, DockImlib2Prefs *p);
#else
DockImlib2* dockimlib2_gkrellm_setup(int x0, int y0, int w, int h, DockImlib2Prefs *p, GdkDrawable *gkdrawable);
void dockimlib2_gkrellm_xinit(DockImlib2 *dock, GdkDrawable *gkdrawable);
#endif
Imlib_Font *load_font(char *prefname, char **flist);
void dockimlib2_reset_imlib(DockImlib2 *dock);
void dockimlib2_render(DockImlib2 *dock);
const char *dockimlib2_last_loaded_font();
#endif
wmhdplop-0.9.12/config.h.in 0000644 0002074 0002074 00000003670 14302112222 012374 0000000 0000000 /* config.h.in. Generated from configure.ac by autoheader. */
/* enable queries to hddtemp */
#undef ENABLE_HDDTEMP_QUERY
/* Define to 1 if you have the header file. */
#undef HAVE_GKRELLM2_GKRELLM_H
/* Define to 1 if you have the header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_LINUX_HDREG_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDIO_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_UNISTD_H
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if all of the C90 standard headers exist (not just the ones
required in a freestanding environment). This macro is provided for
backward compatibility; new code need not use it. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Define to 1 if the X Window System is missing or not being used. */
#undef X_DISPLAY_MISSING
/* uses GNU extensions */
#undef _GNU_SOURCE
wmhdplop-0.9.12/procstat.h 0000644 0002074 0002074 00000001543 13655747211 012404 0000000 0000000 #ifndef PROCSTAT_H
#define PROCSTAT_H
#include "util.h"
struct pstat {
unsigned long total;
long nslice, cur_slice;
unsigned long *slices;
float update_interval;
};
typedef struct {
/* counted in sectors */
struct pstat swap_in, swap_out;
struct pstat disk_read, disk_write;
} ProcStats;
void pstat_init(struct pstat *pst, long nslice, float update_interval);
float pstat_current(struct pstat *pst);
void pstat_add(struct pstat *pst, unsigned long v);
void pstat_advance(struct pstat *pst);
float pstat_meanval(struct pstat *pst);
/* given in MB/s */
float get_read_throughput();
float get_write_throughput();
float get_swapin_throughput();
float get_swapout_throughput();
float get_read_mean_throughput();
float get_write_mean_throughput();
void update_stats();
void init_stats(float update_interval);
void scan_all_hd(int add_partitions);
#endif
wmhdplop-0.9.12/wmhdplop.h 0000644 0002074 0002074 00000002760 13717260551 012375 0000000 0000000 #ifndef WMHDPLOP_H
#define WMHDPLOP_H
#ifdef GKRELLM
#include
#endif
#include "config.h"
#include "dockapp_imlib2.h"
#include "procstat.h"
#include "devnames.h"
typedef struct {
int nrow, ncol;
int w;
unsigned char **pre_cnt;
char **intensity; /* > 0 for swap in, < 0 for swap out */
} SwapMatrix;
typedef struct IO_op_lst {
enum { OP_READ, OP_WRITE } op;
int n; /* "magnitude" of operation (log2 of kb/s) */
int i,j; /* location of the IOMatrix */
struct IO_op_lst *next;
} IO_op_lst;
#define CMAPSZ 256
typedef struct colormap {
DATA32 p[CMAPSZ];
} cmap;
typedef struct {
int w,h;
int * __restrict * __restrict v; /* dim w+2, h+4 */
cmap cm;
IO_op_lst *ops;
} IOMatrix;
typedef struct {
DockImlib2 *dock;
Imlib_Font bigfont,smallfont;
char *current_bigfont_name, *current_smallfont_name;
unsigned update_display_delay_ms;
unsigned update_stats_mult;
unsigned char swap_matrix_luminosity, swap_matrix_lighting;
SwapMatrix sm;
IOMatrix iom;
int nb_hd, nb_dev;
enum {HD_ACTIVE, HD_STANDBY, HD_SLEEP, HD_UNKNOWN} *disk_power_mode;
int *disk_temperature;
int filter_hd, filter_part;
int displayed_hd_changed;
int reshape_cnt;
} App;
void reshape(int w, int h);
#ifdef GKRELLM
int hdplop_main(int w, int h, GdkDrawable *gkdrawable);
void gkrellm_hdplop_update(int update_options);
#endif
void change_displayed_hd(int dir);
void next_displayed_hd();
void prev_displayed_hd();
void init_fonts(App*);
DECL_GLOB_INIT(App *app, NULL);
#endif
wmhdplop-0.9.12/config.sub 0000755 0002074 0002074 00000105116 14302112222 012332 0000000 0000000 #! /bin/sh
# Configuration validation subroutine script.
# Copyright 1992-2022 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2022-01-03'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
# Please send patches to .
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.sub ($timestamp)
Copyright 1992-2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
*local*)
# First pass through any local machine types.
echo "$1"
exit ;;
* )
break ;;
esac
done
case $# in
0) echo "$me: missing argument$help" >&2
exit 1;;
1) ;;
*) echo "$me: too many arguments$help" >&2
exit 1;;
esac
# Split fields of configuration type
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read field1 field2 field3 field4 <&2
exit 1
;;
*-*-*-*)
basic_machine=$field1-$field2
basic_os=$field3-$field4
;;
*-*-*)
# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
# parts
maybe_os=$field2-$field3
case $maybe_os in
nto-qnx* | linux-* | uclinux-uclibc* \
| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
| storm-chaos* | os2-emx* | rtmk-nova*)
basic_machine=$field1
basic_os=$maybe_os
;;
android-linux)
basic_machine=$field1-unknown
basic_os=linux-android
;;
*)
basic_machine=$field1-$field2
basic_os=$field3
;;
esac
;;
*-*)
# A lone config we happen to match not fitting any pattern
case $field1-$field2 in
decstation-3100)
basic_machine=mips-dec
basic_os=
;;
*-*)
# Second component is usually, but not always the OS
case $field2 in
# Prevent following clause from handling this valid os
sun*os*)
basic_machine=$field1
basic_os=$field2
;;
zephyr*)
basic_machine=$field1-unknown
basic_os=$field2
;;
# Manufacturers
dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
| unicom* | ibm* | next | hp | isi* | apollo | altos* \
| convergent* | ncr* | news | 32* | 3600* | 3100* \
| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
| ultra | tti* | harris | dolphin | highlevel | gould \
| cbm | ns | masscomp | apple | axis | knuth | cray \
| microblaze* | sim | cisco \
| oki | wec | wrs | winbond)
basic_machine=$field1-$field2
basic_os=
;;
*)
basic_machine=$field1
basic_os=$field2
;;
esac
;;
esac
;;
*)
# Convert single-component short-hands not valid as part of
# multi-component configurations.
case $field1 in
386bsd)
basic_machine=i386-pc
basic_os=bsd
;;
a29khif)
basic_machine=a29k-amd
basic_os=udi
;;
adobe68k)
basic_machine=m68010-adobe
basic_os=scout
;;
alliant)
basic_machine=fx80-alliant
basic_os=
;;
altos | altos3068)
basic_machine=m68k-altos
basic_os=
;;
am29k)
basic_machine=a29k-none
basic_os=bsd
;;
amdahl)
basic_machine=580-amdahl
basic_os=sysv
;;
amiga)
basic_machine=m68k-unknown
basic_os=
;;
amigaos | amigados)
basic_machine=m68k-unknown
basic_os=amigaos
;;
amigaunix | amix)
basic_machine=m68k-unknown
basic_os=sysv4
;;
apollo68)
basic_machine=m68k-apollo
basic_os=sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
basic_os=bsd
;;
aros)
basic_machine=i386-pc
basic_os=aros
;;
aux)
basic_machine=m68k-apple
basic_os=aux
;;
balance)
basic_machine=ns32k-sequent
basic_os=dynix
;;
blackfin)
basic_machine=bfin-unknown
basic_os=linux
;;
cegcc)
basic_machine=arm-unknown
basic_os=cegcc
;;
convex-c1)
basic_machine=c1-convex
basic_os=bsd
;;
convex-c2)
basic_machine=c2-convex
basic_os=bsd
;;
convex-c32)
basic_machine=c32-convex
basic_os=bsd
;;
convex-c34)
basic_machine=c34-convex
basic_os=bsd
;;
convex-c38)
basic_machine=c38-convex
basic_os=bsd
;;
cray)
basic_machine=j90-cray
basic_os=unicos
;;
crds | unos)
basic_machine=m68k-crds
basic_os=
;;
da30)
basic_machine=m68k-da30
basic_os=
;;
decstation | pmax | pmin | dec3100 | decstatn)
basic_machine=mips-dec
basic_os=
;;
delta88)
basic_machine=m88k-motorola
basic_os=sysv3
;;
dicos)
basic_machine=i686-pc
basic_os=dicos
;;
djgpp)
basic_machine=i586-pc
basic_os=msdosdjgpp
;;
ebmon29k)
basic_machine=a29k-amd
basic_os=ebmon
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
basic_os=ose
;;
gmicro)
basic_machine=tron-gmicro
basic_os=sysv
;;
go32)
basic_machine=i386-pc
basic_os=go32
;;
h8300hms)
basic_machine=h8300-hitachi
basic_os=hms
;;
h8300xray)
basic_machine=h8300-hitachi
basic_os=xray
;;
h8500hms)
basic_machine=h8500-hitachi
basic_os=hms
;;
harris)
basic_machine=m88k-harris
basic_os=sysv3
;;
hp300 | hp300hpux)
basic_machine=m68k-hp
basic_os=hpux
;;
hp300bsd)
basic_machine=m68k-hp
basic_os=bsd
;;
hppaosf)
basic_machine=hppa1.1-hp
basic_os=osf
;;
hppro)
basic_machine=hppa1.1-hp
basic_os=proelf
;;
i386mach)
basic_machine=i386-mach
basic_os=mach
;;
isi68 | isi)
basic_machine=m68k-isi
basic_os=sysv
;;
m68knommu)
basic_machine=m68k-unknown
basic_os=linux
;;
magnum | m3230)
basic_machine=mips-mips
basic_os=sysv
;;
merlin)
basic_machine=ns32k-utek
basic_os=sysv
;;
mingw64)
basic_machine=x86_64-pc
basic_os=mingw64
;;
mingw32)
basic_machine=i686-pc
basic_os=mingw32
;;
mingw32ce)
basic_machine=arm-unknown
basic_os=mingw32ce
;;
monitor)
basic_machine=m68k-rom68k
basic_os=coff
;;
morphos)
basic_machine=powerpc-unknown
basic_os=morphos
;;
moxiebox)
basic_machine=moxie-unknown
basic_os=moxiebox
;;
msdos)
basic_machine=i386-pc
basic_os=msdos
;;
msys)
basic_machine=i686-pc
basic_os=msys
;;
mvs)
basic_machine=i370-ibm
basic_os=mvs
;;
nacl)
basic_machine=le32-unknown
basic_os=nacl
;;
ncr3000)
basic_machine=i486-ncr
basic_os=sysv4
;;
netbsd386)
basic_machine=i386-pc
basic_os=netbsd
;;
netwinder)
basic_machine=armv4l-rebel
basic_os=linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
basic_os=newsos
;;
news1000)
basic_machine=m68030-sony
basic_os=newsos
;;
necv70)
basic_machine=v70-nec
basic_os=sysv
;;
nh3000)
basic_machine=m68k-harris
basic_os=cxux
;;
nh[45]000)
basic_machine=m88k-harris
basic_os=cxux
;;
nindy960)
basic_machine=i960-intel
basic_os=nindy
;;
mon960)
basic_machine=i960-intel
basic_os=mon960
;;
nonstopux)
basic_machine=mips-compaq
basic_os=nonstopux
;;
os400)
basic_machine=powerpc-ibm
basic_os=os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
basic_os=ose
;;
os68k)
basic_machine=m68k-none
basic_os=os68k
;;
paragon)
basic_machine=i860-intel
basic_os=osf
;;
parisc)
basic_machine=hppa-unknown
basic_os=linux
;;
psp)
basic_machine=mipsallegrexel-sony
basic_os=psp
;;
pw32)
basic_machine=i586-unknown
basic_os=pw32
;;
rdos | rdos64)
basic_machine=x86_64-pc
basic_os=rdos
;;
rdos32)
basic_machine=i386-pc
basic_os=rdos
;;
rom68k)
basic_machine=m68k-rom68k
basic_os=coff
;;
sa29200)
basic_machine=a29k-amd
basic_os=udi
;;
sei)
basic_machine=mips-sei
basic_os=seiux
;;
sequent)
basic_machine=i386-sequent
basic_os=
;;
sps7)
basic_machine=m68k-bull
basic_os=sysv2
;;
st2000)
basic_machine=m68k-tandem
basic_os=
;;
stratus)
basic_machine=i860-stratus
basic_os=sysv4
;;
sun2)
basic_machine=m68000-sun
basic_os=
;;
sun2os3)
basic_machine=m68000-sun
basic_os=sunos3
;;
sun2os4)
basic_machine=m68000-sun
basic_os=sunos4
;;
sun3)
basic_machine=m68k-sun
basic_os=
;;
sun3os3)
basic_machine=m68k-sun
basic_os=sunos3
;;
sun3os4)
basic_machine=m68k-sun
basic_os=sunos4
;;
sun4)
basic_machine=sparc-sun
basic_os=
;;
sun4os3)
basic_machine=sparc-sun
basic_os=sunos3
;;
sun4os4)
basic_machine=sparc-sun
basic_os=sunos4
;;
sun4sol2)
basic_machine=sparc-sun
basic_os=solaris2
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
basic_os=
;;
sv1)
basic_machine=sv1-cray
basic_os=unicos
;;
symmetry)
basic_machine=i386-sequent
basic_os=dynix
;;
t3e)
basic_machine=alphaev5-cray
basic_os=unicos
;;
t90)
basic_machine=t90-cray
basic_os=unicos
;;
toad1)
basic_machine=pdp10-xkl
basic_os=tops20
;;
tpf)
basic_machine=s390x-ibm
basic_os=tpf
;;
udi29k)
basic_machine=a29k-amd
basic_os=udi
;;
ultra3)
basic_machine=a29k-nyu
basic_os=sym1
;;
v810 | necv810)
basic_machine=v810-nec
basic_os=none
;;
vaxv)
basic_machine=vax-dec
basic_os=sysv
;;
vms)
basic_machine=vax-dec
basic_os=vms
;;
vsta)
basic_machine=i386-pc
basic_os=vsta
;;
vxworks960)
basic_machine=i960-wrs
basic_os=vxworks
;;
vxworks68)
basic_machine=m68k-wrs
basic_os=vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
basic_os=vxworks
;;
xbox)
basic_machine=i686-pc
basic_os=mingw32
;;
ymp)
basic_machine=ymp-cray
basic_os=unicos
;;
*)
basic_machine=$1
basic_os=
;;
esac
;;
esac
# Decode 1-component or ad-hoc basic machines
case $basic_machine in
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
cpu=hppa1.1
vendor=winbond
;;
op50n)
cpu=hppa1.1
vendor=oki
;;
op60c)
cpu=hppa1.1
vendor=oki
;;
ibm*)
cpu=i370
vendor=ibm
;;
orion105)
cpu=clipper
vendor=highlevel
;;
mac | mpw | mac-mpw)
cpu=m68k
vendor=apple
;;
pmac | pmac-mpw)
cpu=powerpc
vendor=apple
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
cpu=m68000
vendor=att
;;
3b*)
cpu=we32k
vendor=att
;;
bluegene*)
cpu=powerpc
vendor=ibm
basic_os=cnk
;;
decsystem10* | dec10*)
cpu=pdp10
vendor=dec
basic_os=tops10
;;
decsystem20* | dec20*)
cpu=pdp10
vendor=dec
basic_os=tops20
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
cpu=m68k
vendor=motorola
;;
dpx2*)
cpu=m68k
vendor=bull
basic_os=sysv3
;;
encore | umax | mmax)
cpu=ns32k
vendor=encore
;;
elxsi)
cpu=elxsi
vendor=elxsi
basic_os=${basic_os:-bsd}
;;
fx2800)
cpu=i860
vendor=alliant
;;
genix)
cpu=ns32k
vendor=ns
;;
h3050r* | hiux*)
cpu=hppa1.1
vendor=hitachi
basic_os=hiuxwe2
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
cpu=m68000
vendor=hp
;;
hp9k3[2-9][0-9])
cpu=m68k
vendor=hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
cpu=hppa1.1
vendor=hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
cpu=hppa1.1
vendor=hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
cpu=hppa1.1
vendor=hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
cpu=hppa1.1
vendor=hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
i*86v32)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv32
;;
i*86v4*)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv4
;;
i*86v)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv
;;
i*86sol2)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=solaris2
;;
j90 | j90-cray)
cpu=j90
vendor=cray
basic_os=${basic_os:-unicos}
;;
iris | iris4d)
cpu=mips
vendor=sgi
case $basic_os in
irix*)
;;
*)
basic_os=irix4
;;
esac
;;
miniframe)
cpu=m68000
vendor=convergent
;;
*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
cpu=m68k
vendor=atari
basic_os=mint
;;
news-3600 | risc-news)
cpu=mips
vendor=sony
basic_os=newsos
;;
next | m*-next)
cpu=m68k
vendor=next
case $basic_os in
openstep*)
;;
nextstep*)
;;
ns2*)
basic_os=nextstep2
;;
*)
basic_os=nextstep3
;;
esac
;;
np1)
cpu=np1
vendor=gould
;;
op50n-* | op60c-*)
cpu=hppa1.1
vendor=oki
basic_os=proelf
;;
pa-hitachi)
cpu=hppa1.1
vendor=hitachi
basic_os=hiuxwe2
;;
pbd)
cpu=sparc
vendor=tti
;;
pbb)
cpu=m68k
vendor=tti
;;
pc532)
cpu=ns32k
vendor=pc532
;;
pn)
cpu=pn
vendor=gould
;;
power)
cpu=power
vendor=ibm
;;
ps2)
cpu=i386
vendor=ibm
;;
rm[46]00)
cpu=mips
vendor=siemens
;;
rtpc | rtpc-*)
cpu=romp
vendor=ibm
;;
sde)
cpu=mipsisa32
vendor=sde
basic_os=${basic_os:-elf}
;;
simso-wrs)
cpu=sparclite
vendor=wrs
basic_os=vxworks
;;
tower | tower-32)
cpu=m68k
vendor=ncr
;;
vpp*|vx|vx-*)
cpu=f301
vendor=fujitsu
;;
w65)
cpu=w65
vendor=wdc
;;
w89k-*)
cpu=hppa1.1
vendor=winbond
basic_os=proelf
;;
none)
cpu=none
vendor=none
;;
leon|leon[3-9])
cpu=sparc
vendor=$basic_machine
;;
leon-*|leon[3-9]-*)
cpu=sparc
vendor=`echo "$basic_machine" | sed 's/-.*//'`
;;
*-*)
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read cpu vendor <&2
exit 1
;;
esac
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $vendor in
digital*)
vendor=dec
;;
commodore*)
vendor=cbm
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if test x$basic_os != x
then
# First recognize some ad-hoc cases, or perhaps split kernel-os, or else just
# set os.
case $basic_os in
gnu/linux*)
kernel=linux
os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'`
;;
os2-emx)
kernel=os2
os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'`
;;
nto-qnx*)
kernel=nto
os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'`
;;
*-*)
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read kernel os <&2
exit 1
;;
esac
# As a final step for OS-related things, validate the OS-kernel combination
# (given a valid OS), if there is a kernel.
case $kernel-$os in
linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \
| linux-musl* | linux-relibc* | linux-uclibc* )
;;
uclinux-uclibc* )
;;
-dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* )
# These are just libc implementations, not actual OSes, and thus
# require a kernel.
echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2
exit 1
;;
kfreebsd*-gnu* | kopensolaris*-gnu*)
;;
vxworks-simlinux | vxworks-simwindows | vxworks-spe)
;;
nto-qnx*)
;;
os2-emx)
;;
*-eabi* | *-gnueabi*)
;;
-*)
# Blank kernel with real OS is always fine.
;;
*-*)
echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2
exit 1
;;
esac
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
case $vendor in
unknown)
case $cpu-$os in
*-riscix*)
vendor=acorn
;;
*-sunos*)
vendor=sun
;;
*-cnk* | *-aix*)
vendor=ibm
;;
*-beos*)
vendor=be
;;
*-hpux*)
vendor=hp
;;
*-mpeix*)
vendor=hp
;;
*-hiux*)
vendor=hitachi
;;
*-unos*)
vendor=crds
;;
*-dgux*)
vendor=dg
;;
*-luna*)
vendor=omron
;;
*-genix*)
vendor=ns
;;
*-clix*)
vendor=intergraph
;;
*-mvs* | *-opened*)
vendor=ibm
;;
*-os400*)
vendor=ibm
;;
s390-* | s390x-*)
vendor=ibm
;;
*-ptx*)
vendor=sequent
;;
*-tpf*)
vendor=ibm
;;
*-vxsim* | *-vxworks* | *-windiss*)
vendor=wrs
;;
*-aux*)
vendor=apple
;;
*-hms*)
vendor=hitachi
;;
*-mpw* | *-macos*)
vendor=apple
;;
*-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*)
vendor=atari
;;
*-vos*)
vendor=stratus
;;
esac
;;
esac
echo "$cpu-$vendor-${kernel:+$kernel-}$os"
exit
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
wmhdplop-0.9.12/wmhdplop.c 0000644 0002074 0002074 00000111323 14301766542 012365 0000000 0000000 /*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
USA.
*/
#include "config.h"
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#ifdef ENABLE_HDDTEMP_QUERY
#include
#include
#include
#include
#endif
#define GLOBALS_HERE
#include "global.h"
#include "wmhdplop.h"
uid_t euid, uid;
void update_swap_matrix(App *app) {
SwapMatrix *sm = &app->sm;
unsigned i;
int col,row;
unsigned sw_in = ceil(get_swapin_throughput()*4), sw_out = ceil(get_swapout_throughput()*4);
for (i=0; i < sw_in+sw_out; i++) {
col = rand() % sm->ncol;
row = rand() % sm->nrow;
if (sm->intensity[row][col] == 0) {
sm->pre_cnt[row][col] = rand() % 10; //(app->update_stats_mult);
}
sm->intensity[row][col] = app->swap_matrix_lighting * ((i < sw_in) ? -1 : +1);
}
}
void update_io_matrix_rw(App *app, float mbs, int op) {
IOMatrix *io = &app->iom;
IO_op_lst *l;
if (mbs > 10000) mbs = 10000; /* very quick and ugly fix for the strange bug which only occurs in gkhdplop */
int bsz = MAX(SQR(16*64./(app->dock->w + app->dock->h)),2); /* 1024 for a 64x64 applet */
while (mbs>1e-5) {
float v = MIN(mbs, bsz); /* a throughput > 1MB/s will create more than one spot */
mbs -= v;
l = calloc(1,sizeof(*l)); assert(l);
l->next = io->ops;
l->n = (int)(log2f(1+v*1024)/10.);
l->op = op;
l->i = rand() % io->h;
l->j = rand() % io->w;
io->ops = l;
}
}
void update_io_matrix(App *app) {
update_io_matrix_rw(app, get_read_throughput(), OP_READ);
update_io_matrix_rw(app, get_write_throughput(), OP_WRITE);
}
#define IOSCAL 32768
void evolve_io_matrix(App *app, DATA32 * __restrict buff) {
IOMatrix *io = &app->iom;
int i,j;
int * __restrict pl, * __restrict tmp;
IO_op_lst *o = io->ops, *po = NULL, *no;
while (o) {
io->v[o->i+1][o->j+1] = ((o->op == OP_READ) ? +50000000 : -50000000);
no = o->next;
if (--o->n <= 0) {
if (po) { po->next = no; }
else { io->ops = no; }
free(o);
} else po = po->next;
o = no;
}
/* brain-dead diffusion */
pl = io->v[io->h+2];
int * __restrict l = io->v[io->h+3];
for (j=1; j < io->w+1; ++j) pl[j] = 0;
for (i=1; i < io->h+1; ++i) {
/*
for (j=1; j < io->w+1; ++j) {
l[j] = io->v[i][j]*0.99 + (io->v[i][j-1] + io->v[i][j+1] + pl[j] + io->v[i+1][j] - 4*io->v[i][j])/5.;
}
*/
/*
float *__restrict nl = io->v[i+1]+1;
float *__restrict cl = io->v[i];
for (j=1; j < io->w+1; ++j, ++cl) {
l[j] = (cl[1])*0.99 + (cl[0] + cl[2] + pl[j] + *nl++ - 4*cl[1])/5.;
}
*/
int *__restrict dest;
int *__restrict pn = io->v[i+1]+1;
int *__restrict pc = io->v[i]+1;
int *__restrict pp = pl+1;
int pj,cj=0,nj=*pc++;
for (j=0, dest=l+1, pj = 0.; j < io->w; ++j) {
pj = cj; cj = nj; nj = *pc++;
*dest = (cj * 37)/200 + (pj + nj + *pp++ + *pn++)/5;
/* *dest = 99*(cj + (pj + nj + *pp++ + *pn++)/(4))/200; */
//} for (j=0, dest=l+1; j < io->w; ++j) {
int v = (int)(*dest++ >> 10);
if (v == 0) { *buff++ = io->cm.p[CMAPSZ/2]; continue; }
if (v > CMAPSZ/4) { /* cheaper than a log(vv) ... */
v = MIN(CMAPSZ/4 + (v-CMAPSZ/4)/16,CMAPSZ/2-1);
} else if (v < -CMAPSZ/4) {
v = MAX(-CMAPSZ/4 + (v+CMAPSZ/4)/16,-CMAPSZ/2);
}
*buff++ = io->cm.p[v+CMAPSZ/2];
}
tmp = pl; pl = io->v[i]; io->v[i] = l; l = tmp;
io->v[io->h+2] = pl; io->v[io->h+3] = l;
}
}
#if 0
static void draw_io_matrix(App *app, DATA32 * __restrict buff) {
IOMatrix *io = &app->iom;
int i,j;
for (i=0; i < io->h; ++i) {
for (j=0; j < io->w; ++j) {
float vv = io->v[i+1][j+1];
int v = (int)(vv * 32768); //((int)ldexpf(vv,15)); /* (int)v*(2^15) */
//if (v == 0) continue;
//if (v < 0) v*=3; /* write op are rare, so they are brighter .. */
if (v > CMAPSZ/4) { /* cheaper than a log(vv) ... */
v = MIN(CMAPSZ/4 + (v-CMAPSZ/4)/16,CMAPSZ/2-1);
} else if (v < -CMAPSZ/4) {
v = MAX(-CMAPSZ/4 + (v+CMAPSZ/4)/16,-CMAPSZ/2);
}
//assert(v+CMAPSZ/2>=0);
//assert(v+CMAPSZ/2 < sizeof io->cm.p);
*buff++ /*[j+i*io->w]*/ = io->cm.p[v+CMAPSZ/2];
}
}
}
#endif
void draw_swap_matrix(App *app) {
SwapMatrix *sm = &app->sm;
int rcnt[sm->nrow+1], ccnt[sm->ncol+1];
int row, col;
int isswapping = 0;
static int darkcnt = 0;
memset(rcnt, 0, sizeof rcnt); memset(ccnt, 0, sizeof ccnt);
for (row = 0; row < sm->nrow; row++) {
for (col = 0; col < sm->ncol; col++) {
if (sm->pre_cnt[row][col]>0) { isswapping = 1; sm->pre_cnt[row][col]--; }
}
}
if (isswapping) darkcnt = MIN(darkcnt+1,7);
else darkcnt = MAX(darkcnt-1, 0);
/* darken everything */
if (darkcnt) {
imlib_context_set_color(0, 0, 0, (darkcnt+1)*16);
imlib_image_fill_rectangle(0, 0, app->dock->w, app->dock->h);
}
/* draw squares */
for (row = 0; row < sm->nrow; row++) {
for (col = 0; col < sm->ncol; col++) {
if (sm->intensity[row][col] && sm->pre_cnt[row][col]==0) {
int v = sm->intensity[row][col];
v = (v * app->swap_matrix_luminosity)/(int)app->swap_matrix_lighting;
rcnt[row ] = MAX(rcnt[row ],abs(v)); ccnt[col ] = MAX(ccnt[col ],abs(v));
rcnt[row+1] = MAX(rcnt[row+1],abs(v)); ccnt[col+1] = MAX(ccnt[col+1],abs(v));
//v = (v*155)/255;
/*if (v > 0) imlib_context_set_color(100+v, 155-v, 155-v, 250);
else imlib_context_set_color(0, 100-v, 0, 250);*/
if (v > 0) imlib_context_set_color(255, 50, 50, MIN(v+80,255));
else imlib_context_set_color(50, 255, 50, MIN(v+80,255));
imlib_image_fill_rectangle(row*sm->w+1,col*sm->w+1,sm->w-1,sm->w-1);
if (sm->intensity[row][col] > 0) {
sm->intensity[row][col]--;
} else if (sm->intensity[row][col] < 0) {
sm->intensity[row][col]++;
}
}
}
}
/* draw lines */
for (row = 0; row < sm->nrow+1; row++) {
if (rcnt[row]) {
imlib_context_set_color(255, 255, 255, MIN(rcnt[row]*2/3, 255));
imlib_image_draw_line(row*sm->w,0,row*sm->w,app->dock->w,0);
}
}
for (col = 0; col < sm->ncol+1; col++) {
if (ccnt[col]) {
imlib_context_set_color(255, 255, 255, MIN(ccnt[col]*2/3, 255));
imlib_image_draw_line(0,col*sm->w,app->dock->h,col*sm->w,0);
}
}
}
float f2celsius(float Tf) {
return (5./9.)*(Tf-32.);
}
float celsius2f(float Tc) {
return (9./5.)*Tc+32.;
}
static void query_hddtemp(App *app) {
int fd;
struct hostent *h;
struct sockaddr_in addr;
char buff[1024];
SET_VEC(app->disk_temperature, -1, 0, app->nb_hd);
if ((h = gethostbyname("127.0.0.1")) == NULL) {
fprintf(stderr, "gethostbyname(localhost) failed : %s\n", strerror(errno)); return;
}
if ((fd = socket(h->h_addrtype, SOCK_STREAM,0)) == -1) {
fprintf(stderr, "can't create socket : %s\n", strerror(errno)); return;
}
memset(&addr,0,sizeof(struct sockaddr_in));
addr.sin_family = AF_INET;
addr.sin_port = htons(Prefs.hddtemp_port);
addr.sin_addr.s_addr = ((struct in_addr*)(h->h_addr))->s_addr;
if (connect(fd, (struct sockaddr *)&addr, sizeof addr) < 0) {
close(fd);
fprintf(stderr,"can't connect to 127.0.0.1:%d : %s\n", Prefs.hddtemp_port, strerror(errno));
#ifdef GKRELLM
Prefs.enable_hddtemp = 0;
#endif
return;
}
int n = 0;
do {
int nn=read(fd,buff+n,MAX((int)(sizeof buff) - n,0));
if (nn <= 0) { if (nn < 0) n=nn; break; }
n+=nn;
} while (n != sizeof buff);
BLAHBLAH(2,printf("n=%d, err=%s\n",n, strerror(errno)));
if (n != -1) {
char *s;
DiskList *dl;
int cnt;
buff[MIN(n,(int)sizeof buff - 1)] = 0;
for (dl = first_hd_in_list(), cnt = 0; dl; dl = next_hd_in_list(dl), cnt++) {
if (dl->enable_hddtemp) {
int found = 0;
if ((s=strstr(buff, dl->dev_path))) { found = 1; s+= strlen(dl->name); }
if (found) {
s=strchr(s,'|');
if (s && ((s=strchr(s+1,'|')))) {
int unit = 'C';
char *p = strchr(++s,'|'), oldv=0;
if (p) {
oldv = *p;
if (*p && toupper(p[1]) == 'F') unit = 'F';
*p = 0;
}
BLAHBLAH(1,printf("temperature of '%s' : %s %c\n", dl->name, s, unit));
if (strcmp(s,"SLP") == 0) app->disk_temperature[cnt] = -2;
else {
int temp = atoi(s);
if (unit == 'C' && Prefs.temperatures_unit == 'F') {
temp = (int)(floor(celsius2f(temp)+.5));
} else if (unit == 'F' && Prefs.temperatures_unit == 'C') {
temp = (int)(floor(f2celsius(temp)+.5));
}
app->disk_temperature[cnt] = temp;
}
if (p) *p = oldv; /* or bug... */
}
} else {
ONLY_NTIMES(4,fprintf(stderr, "could not find device '%s' in the output of hddtemp: '%s'\n", dl->name, buff));
}
}
}
} else { fprintf(stderr, "error with hddtemp: %s\n", strerror(errno)); }
close(fd);
}
const char *power_mode_str(int m) {
switch (m) {
case HD_ACTIVE: return "active/idle";
case HD_STANDBY: return "standby";
case HD_SLEEP: return "sleep";
case HD_UNKNOWN:
default:
return "unknown/error";
}
}
void sethw(App *app, int lw, int lh, int pos, int *px, int *py, int *pw, int *ph) {
*px = *py = 0; *pw = lw; *ph = lh;
if (!(pos & (AL_RIGHT | AL_LEFT | AL_HCENTER))) *pw = app->dock->w;
if (pos & AL_RIGHT) *px = app->dock->w - lw;
else if (pos & AL_HCENTER) *px = (app->dock->w - lw)/2;
else if (pos & AL_LEFT) *px = 0;
else { *px = 0; *pw = app->dock->w; }
if (pos & AL_BOTTOM) *py = app->dock->h - lh;
else if (pos & AL_VCENTER) *py = (app->dock->h - lh)/2;
else if (pos & AL_TOP) *py = 0;
else { *py = 0; *ph = app->dock->h; }
}
static void my_imlib_text_draw(int x, int y, const char *s) {
char s2[100]; snprintf(s2,100,"%s ",s); /* my imlib2 often forgets half of the last character... */
imlib_text_draw(x,y,s2);
}
int is_displayed(int hd_id, int part_id) {
return (((hd_id == app->filter_hd) || (app->filter_hd == -1)) &&
((part_id == app->filter_part) || (app->filter_part == -1)));
}
void change_displayed_hd(int dir) {
DiskList *dl = find_id(app->filter_hd, app->filter_part);
if (dl == NULL) {
app->filter_hd = -1; app->filter_part = -1;
dl = find_id(app->filter_hd, app->filter_part); assert(dl);
}
else if (dir > 0) {
if (app->filter_hd == -1 && app->filter_part == -1) {
app->filter_hd = -1; app->filter_part = 0;
} else if (app->filter_hd == -1 && app->filter_part == 0) {
app->filter_hd = first_dev_in_list()->hd_id;
app->filter_part = -1;
} else if (app->filter_hd != -1 && app->filter_part != -1) {
DiskList *dl2 = dl->next;
if (dl2) {
if (dl2->hd_id == app->filter_hd)
app->filter_part = dl2->part_id;
else {
app->filter_hd = dl2->hd_id;
app->filter_part = -1;
}
} else {
app->filter_hd = -1;
app->filter_part = -1;
}
} else if (app->filter_hd != -1) {
app->filter_part = dl->part_id;
} else {
app->filter_hd = dl->hd_id;
}
} else if (dir < 0) { /* very very bourin */
int ph, pph, pp, ppp;
ph = app->filter_hd; pp = app->filter_part;
do {
pph = app->filter_hd; ppp = app->filter_part;
change_displayed_hd(+1);
} while (!(app->filter_hd == ph && app->filter_part == pp));
app->filter_hd = pph; app->filter_part = ppp;
}
app->displayed_hd_changed = 1;
}
void next_displayed_hd() {
BLAHBLAH(1,printf("next_displayed_hd() : filter_hd=%d, filter_part=%d\n", app->filter_hd, app->filter_part));
change_displayed_hd(-1);
init_stats(app->update_display_delay_ms*1e-3*app->update_stats_mult);
}
void prev_displayed_hd() {
BLAHBLAH(1,printf("prev_displayed_hd() : filter_hd=%d, filter_part=%d\n", app->filter_hd, app->filter_part));
change_displayed_hd(+1);
init_stats(app->update_display_delay_ms*1e-3*app->update_stats_mult);
}
const char *shorten_name(DiskList *dl) {
static char s[8];
if (dl->name && strlen(dl->name)) {
const char *p = dl->name;
if (strchr(p,'/')) p = strrchr(p,'/')+1;
if (strlen(p) == 0) p = dl->name;
snprintf(s, sizeof s, "%s%s", dl->part_id ? " " : "", p);
} else strncpy(s, dl->name, sizeof s);
return s;
}
static void draw_hdlist(App *app) {
if (Prefs.hdlist_pos == AL_NONE) return;
DiskList *dl;
int dev_cnt, hd_cnt, w;
static int lw = -1, lh = -1, lx = -1, ly = -1, h = -1,
reshape_cnt = 0;
if (!app->smallfont) return;
if (app->displayed_hd_changed) { lx = -1; app->displayed_hd_changed = 0; }
imlib_context_set_font(app->smallfont);
/* get dimensions */
if (lx == -1 || reshape_cnt != app->reshape_cnt) {
int wtemp = 1;
lw = 0; lh = 0;
//printf("update : first displayed(%d) = %p\n", cnt, dl);
for (dl = first_dev_in_list(), dev_cnt=hd_cnt=-1; dl; dl = dl->next) {
if (dl->part_id == 0) ++hd_cnt;
if (!is_displayed(dl->hd_id, dl->part_id)) continue;
++dev_cnt;
imlib_get_text_size(shorten_name(dl),&w,&h);
lw = MAX(w,lw);
lh += h;
}
if (!Prefs.disable_hd_leds) { lw += 5; }
if (Prefs.enable_hddtemp) imlib_get_text_size(" 000",&wtemp,&h);
if (lw + wtemp > (int)(app->dock->w*2/3)) { lw = app->dock->w; }
else lw += wtemp;
sethw(app,lw,lh,Prefs.hdlist_pos,&lx,&ly,&lw,&lh);
reshape_cnt = app->reshape_cnt;
}
imlib_context_set_color(100, 100, 100, 150);
imlib_image_fill_rectangle(lx,ly,lw,lh);
imlib_context_set_color(100, 100, 100, 200);
imlib_image_draw_rectangle(lx-1,ly-1,lw+2,lh+2);
for (dl = first_dev_in_list(), dev_cnt=hd_cnt=-1; dl; dl = dl->next) {
if (dl->part_id==0) ++hd_cnt;
if (!is_displayed(dl->hd_id, dl->part_id)) continue;
++dev_cnt;
int x = lx, y = ly + lh - dev_cnt * h;
if (!Prefs.disable_hd_leds) {
if (dl->touched_r) {
imlib_context_set_color(50, 255, 50, 25*dl->touched_r--);
imlib_image_fill_rectangle(lx+1,y-5,3,3);
}
if (dl->touched_w) {
imlib_context_set_color(255,100-10*dl->touched_w,100-10*dl->touched_w, 25*dl->touched_w - 1);
dl->touched_w--;
imlib_image_fill_rectangle(lx+1,y-9,3,3);
}
x += 5;
}
imlib_context_set_color(200, 255, 255, 200);
my_imlib_text_draw(x,y-h,shorten_name(dl));
if (dl->part_id==0 && app->disk_temperature[hd_cnt] != -1) {
char s[200];
if (app->disk_temperature[hd_cnt] != -2) {
snprintf(s,200,"%d",app->disk_temperature[hd_cnt]);
} else {
strcpy(s,"SLP");
}
imlib_get_text_size(s,&w,&h);
x = lx + lw - w + ((app->disk_temperature[hd_cnt] != -2) ? -7 : -3);
imlib_context_set_color(255, 250, 100, 255);
my_imlib_text_draw(x, y-h, s);
imlib_context_set_color(255, 255, 255, 200);
/* below is a quick fix for the degree sign which is not drawn
properly by recent release of imlib -- many thanks to
Krzysztof Kotlenga for the patch */
//if (app->disk_temperature[hd_cnt] != -2) imlib_image_draw_ellipse(x+w+3, y - h + 2, 1, 1);
//if (app->disk_temperature[hd_cnt] != -2) imlib_image_draw_ellipse(x+w+3, y - h + 2, 1, 1);
/* imlib2 >= 1.1.1 workaround - imlib_image_draw_ellipse() can't properly draw circle with radius = 1 */
if (app->disk_temperature[hd_cnt] != -2) {
/*ImlibPolygon poly;
poly = imlib_polygon_new();
imlib_polygon_add_point(poly, x+w+3, y-h+3);
imlib_polygon_add_point(poly, x+w+2, y-h+2);
imlib_polygon_add_point(poly, x+w+3, y-h+1);
imlib_polygon_add_point(poly, x+w+4, y-h+2);
imlib_image_draw_polygon(poly, 1);*/
/*imlib_image_draw_pixel(x+w+3, y-h+3, 0);
imlib_image_draw_pixel(x+w+2, y-h+2, 0);
imlib_image_draw_pixel(x+w+3, y-h+1, 0);
imlib_image_draw_pixel(x+w+4, y-h+2, 0);*/
int i=x+w+2, j=y-h;
imlib_image_draw_pixel(i+1,j,0);
imlib_image_draw_pixel(i+2,j,0);
imlib_image_draw_pixel(i+3,j+1,0);
imlib_image_draw_pixel(i+3,j+2,0);
imlib_image_draw_pixel(i+1,j+3,0);
imlib_image_draw_pixel(i+2,j+3,0);
imlib_image_draw_pixel(i,j+1,0);
imlib_image_draw_pixel(i,j+2,0);
}
}
}
}
static void draw_throughput(App *app) {
static int tpstep = 0, tpw, tph;
static char tpmsg[20];
static int lw = -1, lh = -1, lx = -1, ly = -1;
static int reshape_cnt = 0;
if (Prefs.popup_throughput_pos == AL_NONE) return;
if (!app->bigfont) return;
imlib_context_set_font(app->bigfont);
/* get dimensions (only once) */
if (lx == -1 || app->reshape_cnt != reshape_cnt) {
imlib_get_text_size("00.0M/s",&lw,&lh);
if (lw > (int)(app->dock->w*3/4)) { lw = app->dock->w; }
sethw(app,lw,lh,Prefs.popup_throughput_pos,&lx,&ly,&lw,&lh);
reshape_cnt = app->reshape_cnt;
}
if (get_read_mean_throughput() + get_write_mean_throughput() > Prefs.popup_throughput_threshold) {
tpstep = MIN(tpstep+1,4);
snprintf(tpmsg,sizeof tpmsg, "%.1fM/s",get_read_mean_throughput() + get_write_mean_throughput());
imlib_get_text_size(tpmsg,&tpw,&tph);
if (tpw > lw) {
snprintf(tpmsg,sizeof tpmsg, "%.1fM",get_read_mean_throughput() + get_write_mean_throughput());
imlib_get_text_size(tpmsg,&tpw,&tph);
}
} else if (tpstep) tpstep--;
if (tpstep) {
imlib_context_set_color(128, 128, 128, tpstep*30);
imlib_image_draw_rectangle(lx-1,ly-1,lw+2,lh+2);
imlib_context_set_color(128, 128, 128, 10+tpstep*25);
imlib_image_fill_rectangle(lx,ly,lw,lh);
imlib_context_set_color(255, 255, 255, 50+tpstep*50);
my_imlib_text_draw(lx + (lw - tpw)/2, ly, tpmsg);
}
}
static void draw(App *app) {
DATA32 *buff = imlib_image_get_data();
if (!Prefs.disable_io_matrix) {
evolve_io_matrix(app,buff);
//draw_io_matrix(app,buff);
} else memset(buff, 0, sizeof(DATA32)*app->dock->w*app->dock->h);
imlib_image_put_back_data(buff);
draw_hdlist(app);
if (!Prefs.disable_swap_matrix) draw_swap_matrix(app);
draw_throughput(app);
}
void reshape(int w, int h) {
DockImlib2 *dock = app->dock;
static int isinit = 0;
dock->w = w; dock->h = h;
dock->win_width = dock->w + dock->x0;
dock->win_height = dock->h + dock->y0;
app->reshape_cnt++;
app->sm.w = 6;
app->sm.nrow = (dock->w-1) / app->sm.w;
app->sm.ncol = (dock->h-1) / app->sm.w;
if (isinit) FREE_ARR(app->sm.pre_cnt);
ALLOC_ARR(app->sm.pre_cnt, app->sm.nrow, app->sm.ncol);
if (isinit) FREE_ARR(app->sm.intensity)
ALLOC_ARR(app->sm.intensity, app->sm.nrow, app->sm.ncol);
app->iom.w = dock->w; app->iom.h = dock->h;
if (isinit) FREE_ARR((void*)app->iom.v);
ALLOC_ARR(app->iom.v,app->iom.h+4, app->iom.w+2);
if (isinit) { dockimlib2_reset_imlib(dock); }
isinit = 1;
}
#ifndef GKRELLM
static void event_loop(App *app) {
int tic_cnt = 0;
while (1) {
XEvent ev;
tic_cnt++;
if (tic_cnt % 5 == 0) {
XWindowAttributes attr;
if (app->dock->normalwin) {
XGetWindowAttributes(app->dock->display, app->dock->normalwin, &attr);
app->dock->normalwin_mapped = (attr.map_state == IsViewable);
}
if (app->dock->iconwin) {
XGetWindowAttributes(app->dock->display, app->dock->iconwin, &attr);
app->dock->iconwin_mapped = (attr.map_state == IsViewable);
}
}
while (XPending(app->dock->display)) {
XNextEvent(app->dock->display, &ev);
switch (ev.type) {
case ClientMessage:
if (ev.xclient.message_type == app->dock->atom_WM_PROTOCOLS
&& ev.xclient.format == 32
&& (Atom)ev.xclient.data.l[0] == app->dock->atom_WM_DELETE_WINDOW) {
exit(0);
}
break;
case ButtonRelease:
//exit(0);
if (ev.xbutton.button == Button4) prev_displayed_hd(-1);
else if (ev.xbutton.button == Button5 || ev.xbutton.button == Button1) next_displayed_hd(+1);
break;
case ConfigureNotify: {
if (app->dock->iconwin == None &&
(ev.xconfigure.width != (int)app->dock->win_width ||
ev.xconfigure.height != (int)app->dock->win_height)) {
app->dock->w = app->dock->win_width = ev.xconfigure.width;
app->dock->h = app->dock->win_height = ev.xconfigure.height;
reshape(ev.xconfigure.width, ev.xconfigure.height); //app->dock->w, app->dock->h, None);
/*printf("ConfigureNotify : %dx%d %dx%d\n",
ev.xconfigure.width, ev.xconfigure.height,
app->sm.nrow, app->sm.ncol);*/
}
} break;
}
}
if (tic_cnt % app->update_stats_mult == 0) {
update_stats();
if (!Prefs.disable_io_matrix) update_io_matrix(app);
if (!Prefs.disable_swap_matrix) update_swap_matrix(app);
}
if (tic_cnt % 100 == 5) {
# ifdef ENABLE_HDDTEMP_QUERY
if (Prefs.enable_hddtemp) {
query_hddtemp(app);
}
# endif
# ifdef ENABLE_POWER_QUERY
if (Prefs.enable_power_status) {
DiskList *dl; int cnt;
for (cnt = 0, dl = first_hd_in_list(); dl; dl = next_hd_in_list(dl), ++cnt) {
if (dl->enable_power_status && !dl->is_scsi) {
char devname[512]; snprintf(devname, 512, "/dev/%s", dl->name);
app->disk_power_mode[cnt] = query_power_mode(devname);
}
}
}
# endif
}
//if (tic_cnt > 500) exit(1);
usleep(app->update_display_delay_ms * 1000);
draw(app);
dockimlib2_render(app->dock);
}
}
#endif /* ndef GKRELLM */
void setup_cmap(cmap *m) {
struct {
float x0;
DATA32 c;
} colors0[] = {{-128, 0xff8080},
{- 70, 0xF00000},
{ -60, 0xDf0080},
{ -20, 0x800000},
{ 0, 0x000000},
{ 10, 0x008000},
{ 60, 0xf09000},
{ 90, 0xffa000},
{ 116, 0xffd000},
{ 127, 0xffff00}},
colors1[] = {{-128, 0xff0000},
{- 64, 0x808080},
{ 0, 0x404040},
//{ , 0x000000},
//{ 0 , 0x000000},
{ 1, 0x208020},
{ 64, 0x509050},
{+ 90, 0x60C060},
{+127, 0x008000}},
colors2[] = {{-128, 0x400000},
{ -60, 0xA00000},
{ -34, 0xff0000},
{ -16, 0x400000},
{ 0, 0x000000},
{ 16, 0x000040},
{ 34, 0x0000ff},
{ 60, 0x0000A0},
{+128, 0x000040}},
colors3[] = {{-128, 0x500060},
{ -60, 0x500050},
{ -34, 0x000000},
{ 0, 0x000000},
{ 34, 0x000000},
{ 60, 0x206020},
{+128, 0x205020}},
colors4[] = {{-128, 0x5000F0},
{ -70, 0x0000C0},
{ -50, 0x0000A0},
{ -40, 0x707090},
{ -30, 0x000080},
{ -20, 0x505070},
{ -10, 0x000060},
{ 0, 0x000000},
{ 10, 0x006000},
{ 20, 0x707070},
{ 30, 0x008000},
{ 40, 0x909090},
{ 50, 0x00A000},
{ 70, 0x00C000},
{+128, 0x20D020}},
*cdef = NULL;
#define SELMAP(n) \
if (Prefs.iomatrix_colormap == n) { sz = sizeof(colors##n)/sizeof(*colors0); cdef = colors##n; }
unsigned i, sz=0;
SELMAP(0); SELMAP(1); SELMAP(2); SELMAP(3); SELMAP(4);
float x0 = cdef[0].x0, x1 = cdef[sz-1].x0;
for (i = 0; i < sz - 1; ++i) {
int i0 = (int)((cdef[i].x0-x0)*CMAPSZ/(x1-x0));
int i1 = (int)((cdef[i+1].x0-x0)*CMAPSZ/(x1-x0));
int r1 = cdef[i].c>>16 & 0xff, r2 = cdef[i+1].c>>16 & 0xff;
int g1 = cdef[i].c>> 8 & 0xff, g2 = cdef[i+1].c>> 8 & 0xff;
int b1 = cdef[i].c & 0xff, b2 = cdef[i+1].c & 0xff;
int j;
for (j=i0; j <= MIN(i1,CMAPSZ-1); ++j) {
float alpha = (j-i0+.5)/(float)(i1-i0);
m->p[j] =
(MIN((int)(r1*(1-alpha) + alpha*r2),255)<<16) +
(MIN((int)(g1*(1-alpha) + alpha*g2),255)<<8) +
(MIN((int)(b1*(1-alpha) + alpha*b2),255));
//printf("cmap[%d] = 0x%06x\n", j, m->p[j]);
}
}
}
unsigned getpos(const char *pp) {
char p[2];
unsigned v = AL_NONE, i;
if (!pp || !pp[0]) return AL_NONE;
if (strlen(pp) > 2) { fprintf(stderr, "invalid position specification: '%s'\n", pp); exit(1); }
strncpy(p,pp,2);
if (p[0] == 'c') { char tmp = p[0]; p[0] = p[1]; p[1] = tmp; }
for (i=0; i < 2 && p[i]; ++i) {
if (p[i] == 'r') { v |= AL_RIGHT; }
else if (p[i] == 'l') { v |= AL_LEFT; }
else if (p[i] == 't') { v |= AL_TOP; }
else if (p[i] == 'b') { v |= AL_BOTTOM; }
else if (p[i] == 'c') {
if (v & (AL_LEFT | AL_RIGHT | AL_HCENTER)) v |= AL_VCENTER; else v |= AL_HCENTER;
} else {
fprintf(stderr, "unknown position specifier: '%c'\n", p[i]); exit(1);
}
}
return v;
}
void init_prefs(int argc, char **argv) {
#ifndef GKRELLM
/* Prefs already read from the gkrellm config file: */
Prefs.disable_swap_matrix = 0;
Prefs.disable_io_matrix = 0;
Prefs.disable_hd_leds = 0;
Prefs.iomatrix_colormap = 0;
Prefs.popup_throughput_threshold = 0.5; /* MB/s */
Prefs.hdlist_pos = AL_BOTTOM + AL_LEFT;
Prefs.enable_hddtemp = 0;
Prefs.bigfontname = Prefs.smallfontname = NULL;
#endif
Prefs.xprefs.dockapp_size = 64;
Prefs.verbosity = 0;
Prefs.hddtemp_port = 7634;
Prefs.enable_power_status = 0;
Prefs.debug_swapio = 0; Prefs.debug_disk_wr = Prefs.debug_disk_rd = 0;
Prefs.popup_throughput_pos = AL_TOP;
Prefs.xprefs.argc = argc; Prefs.xprefs.argv = argv;
Prefs.xprefs.flags = 0;
Prefs.temperatures_unit = 'C';
}
#ifndef GKRELLM
void parse_options(int argc, char **argv) {
int d_opt_used = 0;
enum { OPT_DISPLAY=1, OPT_SMALLFONT, OPT_BIGFONT, OPT_FONTPATH,
OPT_NOSWAP, OPT_NOIO, OPT_NOLEDS, OPT_HDLIST, OPT_THROUGHPUT, OPT_32, OPT_56, OPT_48 };
static struct option long_options[] = {
{"help",0,0,'h'},
{"verbose",0,0,'v'},
{"version",0,0,'V'},
{"hddtemp",0,0,'t'},
{"farenheit",0,0,'F'},
{"display",1,0,OPT_DISPLAY},
{"geometry",2,0,'g'},
{"smallfont",1,0,OPT_SMALLFONT},
{"bigfont",1,0,OPT_BIGFONT},
{"fontpath",1,0,OPT_FONTPATH},
{"colormap",1,0,'c'},
{"noswap",0,0,OPT_NOSWAP},
{"noio",0,0,OPT_NOIO},
{"noleds",0,0,OPT_NOLEDS},
{"hdlist",2,0,OPT_HDLIST},
{"throughput",2,0,OPT_THROUGHPUT},
{"32",0,0,OPT_32},
{"48",0,0,OPT_48},
{"56",0,0,OPT_56},
{NULL,0,0,0}
};
int long_options_index;
const char *help =
"wmhdplop " VERSION " - monitor hard-drive (or partition) activity\n"
"A recent kernel is required (>2.4.20)\n"
"Usage: wmhdplop [options]\n"
"Option list:\n"
" -h, --help print this.\n"
" -v, --verbose increase verbosity\n"
" -V, --version print version\n"
" -t[=port], --hddtemp[=port]\n"
" display hd temperatures, in Celsius degrees (requires hddtemp daemon running)\n"
" -F, --farenheit display hd temperatures in Farenheit degrees\n"
/* " -p : monitor harddrive power status (idle, standby or sleeping, as reported by hdparm -C)\n"
" note that this options requires that wmhd is suid..\n"*/ /* hddtemp already reports when a drive is asleep ... */
" --noswap disable the animation reflecting swap activity\n"
" --noio disable background animation reflecting disk activity\n"
" --noleds hide the small led indicating disk activity\n"
" --fontpath path add a new directory to the font search directory list\n"
" default: --fontpath=/usr/share/fonts/truetype (and subdirectories)\n"
" --fontpath=/usr/share/fonts/ttf (and subdirectories)\n"
" --fontpath=$HOME/.fonts (and subdirectories)\n"
" --smallfont fontname/size\n"
" --bigfont fontname/size\n"
" Set the 'small font' and the 'big font' name/size in pixel\n"
" (default: --smallfont=Vera/7 --bigfont=Arial_Black/10)\n"
" The font name are case-sensitive, and must correspound to the name\n"
" of a .ttf file which can be found in one of the fontpaths\n"
" By default, wmhdplop tries to load the following fonts:\n"
" * Arial_Black/10, FreeSansBold/11, VeraMoBd/9\n"
" * Vera/7, FreeSans/7, Trebuchet_MS/7\n"
" -c n, --colormap=n\n"
" select colormap number n\n"
" --hdlist[=pos] hide completely the list of drives with leds and temperatures (if no position given)\n"
" or change its location (default: 'B'). Possible positions are: 't','b','l','bl','bc','br',...\n"
" (t=top, b=bottom, l=left, r=right, c=centered, etc)\n"
" --throughput=mbs[,pos]\n"
" minimum io throughput (MB/s) that will be displayed in the popup display (default 0.5)\n"
" and position of the popup (same format than hdlist)\n"
" -g[=WxH+x+y], --geometry[=WxH+x+y]\n"
" start in window (i.e. undocked) mode with specified geometry (i.e -g 96x32 or -g 64x64+0+0)\n"
" --32, --48, --56\n"
" start in a reduced dockapp, for people whose dock is too small too contain 64x64 dockapps\n"
" -d device[:name] monitor activity on the specified hard-drive. This option can be\n"
" used many times. If you do not use it, all hard-drives will be monitored.\n"
" If an optional 'name' is given, it will be displayed instead of the /dev/hdx name\n"
" The device may also be a single partition.\n";
init_prefs(argc, argv);
while (1) {
int c;
c = getopt_long(argc, argv, "g::hvVt::Fc:LP:d:@:",long_options,&long_options_index); /* -g option is handled in dockapp_imlib2 */
if (c == -1)
break;
switch (c) {
case ':':
case '?':
exit(1);
case OPT_DISPLAY:
Prefs.xprefs.flags |= DOCKPREF_DISPLAY; Prefs.xprefs.display = strdup(optarg);
break;
case 'g':
Prefs.xprefs.flags |= DOCKPREF_GEOMETRY; if (optarg) Prefs.xprefs.geometry = strdup(optarg);
break;
case 'h':
puts(help); exit(0);
case 'v':
Prefs.verbosity++;
break;
case 'V':
printf("wmhdplop %s\n",VERSION); exit(0);
break;
case 't':
Prefs.enable_hddtemp = 1;
if (optarg) Prefs.hddtemp_port = atoi(optarg);
break;
/*case 'p':
Prefs.enable_power_status = 1;
break;*/
case 'F':
Prefs.enable_hddtemp = 1;
Prefs.temperatures_unit = 'F';
break;
case OPT_NOIO:
Prefs.disable_io_matrix = 1;
break;
case OPT_NOSWAP:
Prefs.disable_swap_matrix = 1;
break;
case OPT_NOLEDS:
Prefs.disable_hd_leds = 1;
break;
case OPT_FONTPATH:
printf("add font path: %s\n", optarg);
imlib_add_path_to_font_path(optarg);
break;
case OPT_SMALLFONT:
Prefs.smallfontname = strdup(optarg);
break;
case OPT_BIGFONT:
Prefs.bigfontname = strdup(optarg);
break;
case OPT_HDLIST:
Prefs.hdlist_pos = getpos(optarg);
break;
case 'c':
Prefs.iomatrix_colormap = atoi(optarg);
if (Prefs.iomatrix_colormap > 4) { fprintf(stderr,"invalid colormap number\n"); exit(1); }
break;
case OPT_THROUGHPUT:
if (optarg) {
Prefs.popup_throughput_threshold = atof(optarg);
if (strchr(optarg,',')) Prefs.popup_throughput_pos = getpos(strchr(optarg,',')+1);
} break;
case OPT_56:
Prefs.xprefs.dockapp_size = 56;
break;
case OPT_48:
Prefs.xprefs.dockapp_size = 48;
break;
case OPT_32:
Prefs.xprefs.dockapp_size = 32;
break;
case 'd':
if (optarg) {
char *p = strchr(optarg, ':');
assert(optarg);
if (p) *p++ = 0;
BLAHBLAH(1,printf("adding device %s to monitored disc list\n",optarg));
if (add_device_by_name(optarg, p) != 0)
fprintf(stderr, "Warning: device %s not found or not recognized -- try option -v to get additional information\n", optarg);
d_opt_used = 1;
} break;
case '@':
sscanf(optarg,"%d,%d,%d",&Prefs.debug_swapio,&Prefs.debug_disk_rd,&Prefs.debug_disk_wr);
break;
default:
assert(0);
}
}
if (optind != argc) {
fprintf(stderr, "unknown option: %s\n", argv[optind]); exit(1);
}
if (!d_opt_used) scan_all_hd(1);
}
#endif
char *xstrdup(const char *s) {
if (s) return strdup(s);
else return NULL;
}
void init_fonts(App *app) {
char *bigfontlist[] = {"Arial_Black/10", "luxisb/11", "VeraMoBd/9", "arialbd/12", "Vera/9", "Verdana_Bold/10", "VerdanaBd/10", "Verdana/10", "FreeSansBold/11", NULL};
char *smallfontlist[] = {"Vera/7","Trebuchet_MS/7", "luxisr/7", "Verdana/7","Arial/7","FreeSans/7", NULL};
if (app->bigfont) {
imlib_context_set_font(app->bigfont); imlib_free_font(); app->bigfont = NULL;
}
if (app->smallfont) {
imlib_context_set_font(app->smallfont); imlib_free_font(); app->smallfont = NULL;
}
app->bigfont = load_font(Prefs.bigfontname, bigfontlist);
if (app->bigfont)
app->current_bigfont_name = strdup(dockimlib2_last_loaded_font());
app->smallfont = load_font(Prefs.smallfontname, smallfontlist);
if (app->smallfont)
app->current_smallfont_name = strdup(dockimlib2_last_loaded_font());
}
#ifndef GKRELLM
int main(int argc, char**argv)
#else
int hdplop_main(int width, int height, GdkDrawable *gkdrawable)
#endif
{
int s;
euid = geteuid(); uid = getuid();
s = seteuid(uid);
if (s == -1)
fprintf(stderr, "seteuid(uid) failed : %s\n", strerror(errno));
ALLOC_OBJ(app);
srand(time(NULL));
/* Initialize options */
#ifndef GKRELLM
parse_options(argc,argv);
#else
init_prefs(0, NULL);
scan_all_hd(1);
#endif
/* Initialize imlib2 */
#ifndef GKRELLM
app->dock = dockimlib2_setup(2, 2, Prefs.xprefs.dockapp_size-5, Prefs.xprefs.dockapp_size-5, &Prefs.xprefs);
#else
app->dock = dockimlib2_gkrellm_setup(0, 0, width, height, &Prefs.xprefs, gkdrawable);
#endif
app->bigfont = app->smallfont = NULL;
app->current_bigfont_name = app->current_smallfont_name = NULL;
app->reshape_cnt = 0;
if (find_id(-1,0) == 0) {
app->filter_hd = -1; app->filter_part = -1; /* only partitions */
} else {
app->filter_hd = -1; app->filter_part = 0;
}
app->displayed_hd_changed = 1;
if (nb_dev_in_list() == 0) {
#ifndef GKRELLM
fprintf(stderr, "No common hard-drives found in /etc/mtab and /proc/partitions..\n"
"Please use option -d to add devices (i.e. %s -d /dev/hda -d /dev/hdb ...)\n", argv[0]);
exit(1);
#else
fprintf(stderr, "No hard drive found...\n");
/* Euh, on fait quoi maintenant ? exit ? */
#endif
}
init_fonts(app);
app->update_display_delay_ms = 50;
app->update_stats_mult = 2;
app->swap_matrix_lighting = (int)(300/app->update_display_delay_ms);
app->swap_matrix_luminosity = 255;
app->nb_hd = nb_hd_in_list();
app->nb_dev = nb_dev_in_list();
ALLOC_VEC(app->disk_power_mode, app->nb_hd); SET_VEC(app->disk_power_mode, HD_ACTIVE,0,app->nb_hd);
ALLOC_VEC(app->disk_temperature, app->nb_hd); SET_VEC(app->disk_temperature, -1, 0, app->nb_hd);
init_stats(app->update_display_delay_ms*1e-3*app->update_stats_mult);
BLAHBLAH(1, {
DiskList *dl = first_dev_in_list();
for ( ; dl; dl=dl->next) {
printf("Monitored: %s (%s) major=%d, minor=%d is_partition=%d\n",
dl->dev_path, dl->name, dl->major, dl->minor, is_partition(dl->major,dl->minor));
}
});
reshape(app->dock->w,app->dock->h);
app->iom.ops = NULL;
setup_cmap(&app->iom.cm);
#ifndef GKRELLM
event_loop(app);
#endif
return 0;
}
#ifdef GKRELLM
void gkrellm_hdplop_update(int update_options) {
static int tic_cnt = 0;
if (update_options) {
setup_cmap(&app->iom.cm);
if (!Prefs.enable_hddtemp)
SET_VEC(app->disk_temperature, -1, 0, app->nb_hd);
}
// update the data:
if (tic_cnt % app->update_stats_mult == 0) {
update_stats();
if (!Prefs.disable_io_matrix)
update_io_matrix(app);
if (!Prefs.disable_swap_matrix)
update_swap_matrix(app);
}
if (tic_cnt % 100 == 5 && Prefs.enable_hddtemp) {
query_hddtemp(app);
}
// draw the Imlib2 pixmap:
draw(app);
dockimlib2_render(app->dock);
++tic_cnt;
}
#endif
wmhdplop-0.9.12/depcomp 0000755 0002074 0002074 00000056020 14302112222 011723 0000000 0000000 #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
wmhdplop-0.9.12/aclocal.m4 0000644 0002074 0002074 00000146522 14302112221 012214 0000000 0000000 # generated automatically by aclocal 1.16.5 -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],,
[m4_warning([this file was generated for autoconf 2.71.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
# serial 12 (pkg-config-0.29.2)
dnl Copyright © 2004 Scott James Remnant .
dnl Copyright © 2012-2015 Dan Nicholson
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
dnl
dnl As a special exception to the GNU General Public License, if you
dnl distribute this file as part of a program that contains a
dnl configuration script generated by Autoconf, you may include it under
dnl the same distribution terms that you use for the rest of that
dnl program.
dnl PKG_PREREQ(MIN-VERSION)
dnl -----------------------
dnl Since: 0.29
dnl
dnl Verify that the version of the pkg-config macros are at least
dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
dnl installed version of pkg-config, this checks the developer's version
dnl of pkg.m4 when generating configure.
dnl
dnl To ensure that this macro is defined, also add:
dnl m4_ifndef([PKG_PREREQ],
dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
dnl
dnl See the "Since" comment for each macro you use to see what version
dnl of the macros you require.
m4_defun([PKG_PREREQ],
[m4_define([PKG_MACROS_VERSION], [0.29.2])
m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
[m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
])dnl PKG_PREREQ
dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
dnl ----------------------------------
dnl Since: 0.16
dnl
dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
dnl first found in the path. Checks that the version of pkg-config found
dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
dnl used since that's the first version where most current features of
dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=m4_default([$1], [0.9.0])
AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
PKG_CONFIG=""
fi
fi[]dnl
])dnl PKG_PROG_PKG_CONFIG
dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------------------------------
dnl Since: 0.18
dnl
dnl Check to see whether a particular set of modules exists. Similar to
dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
dnl
dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
dnl only at the first occurence in configure.ac, so if the first place
dnl it's called might be skipped (such as if it is within an "if", you
dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
m4_default([$2], [:])
m4_ifvaln([$3], [else
$3])dnl
fi])
dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
dnl ---------------------------------------------
dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
[pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes ],
[pkg_failed=yes])
else
pkg_failed=untried
fi[]dnl
])dnl _PKG_CONFIG
dnl _PKG_SHORT_ERRORS_SUPPORTED
dnl ---------------------------
dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi[]dnl
])dnl _PKG_SHORT_ERRORS_SUPPORTED
dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl [ACTION-IF-NOT-FOUND])
dnl --------------------------------------------------------------
dnl Since: 0.4.0
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
AC_MSG_CHECKING([for $2])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:
$$1_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
_PKG_TEXT
To get pkg-config, see .])[]dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
AC_MSG_RESULT([yes])
$3
fi[]dnl
])dnl PKG_CHECK_MODULES
dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl [ACTION-IF-NOT-FOUND])
dnl ---------------------------------------------------------------------
dnl Since: 0.29
dnl
dnl Checks for existence of MODULES and gathers its build flags with
dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
dnl and VARIABLE-PREFIX_LIBS from --libs.
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
dnl configure.ac.
AC_DEFUN([PKG_CHECK_MODULES_STATIC],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
_save_PKG_CONFIG=$PKG_CONFIG
PKG_CONFIG="$PKG_CONFIG --static"
PKG_CHECK_MODULES($@)
PKG_CONFIG=$_save_PKG_CONFIG[]dnl
])dnl PKG_CHECK_MODULES_STATIC
dnl PKG_INSTALLDIR([DIRECTORY])
dnl -------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable pkgconfigdir as the location where a module
dnl should install pkg-config .pc files. By default the directory is
dnl $libdir/pkgconfig, but the default can be changed by passing
dnl DIRECTORY. The user can override through the --with-pkgconfigdir
dnl parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([pkgconfigdir],
[AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
[with_pkgconfigdir=]pkg_default)
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_INSTALLDIR
dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
dnl --------------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable noarch_pkgconfigdir as the location where a
dnl module should install arch-independent pkg-config .pc files. By
dnl default the directory is $datadir/pkgconfig, but the default can be
dnl changed by passing DIRECTORY. The user can override through the
dnl --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([noarch-pkgconfigdir],
[AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
[with_noarch_pkgconfigdir=]pkg_default)
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_NOARCH_INSTALLDIR
dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------
dnl Since: 0.28
dnl
dnl Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
_PKG_CONFIG([$1], [variable="][$3]["], [$2])
AS_VAR_COPY([$1], [pkg_cv_][$1])
AS_VAR_IF([$1], [""], [$5], [$4])dnl
])dnl PKG_CHECK_VAR
# Copyright (C) 2002-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.16.5], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too. Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.16.5])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
[$1], [CXX], [depcc="$CXX" am_compiler_list=],
[$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
[$1], [UPC], [depcc="$UPC" am_compiler_list=],
[$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
[--enable-dependency-tracking],
[do not reject slow dependency extractors])
AS_HELP_STRING(
[--disable-dependency-tracking],
[speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
# TODO: see whether this extra hack can be removed once we start
# requiring Autoconf 2.70 or later.
AS_CASE([$CONFIG_FILES],
[*\'*], [eval set x "$CONFIG_FILES"],
[*], [set x $CONFIG_FILES])
shift
# Used to flag and report bootstrapping failures.
am_rc=0
for am_mf
do
# Strip MF so we end up with the name of the file.
am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile which includes
# dependency-tracking related rules and includes.
# Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
|| continue
am_dirpart=`AS_DIRNAME(["$am_mf"])`
am_filepart=`AS_BASENAME(["$am_mf"])`
AM_RUN_LOG([cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles]) || am_rc=$?
done
if test $am_rc -ne 0; then
AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
for automatic dependency tracking. If GNU make was not used, consider
re-running the configure script with MAKE="gmake" (or whatever is
necessary). You can also try re-running configure with the
'--disable-dependency-tracking' option to at least be able to build
the package (albeit without support for automatic dependency tracking).])
fi
AS_UNSET([am_dirpart])
AS_UNSET([am_filepart])
AS_UNSET([am_mf])
AS_UNSET([am_rc])
rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking is enabled.
# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
# order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
m4_ifdef([_$0_ALREADY_INIT],
[m4_fatal([$0 expanded multiple times
]m4_defn([_$0_ALREADY_INIT]))],
[m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
[$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]),
[ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES([CC])],
[m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES([CXX])],
[m4_define([AC_PROG_CXX],
m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
# Variables for tags utilities; see am/tags.am
if test -z "$CTAGS"; then
CTAGS=ctags
fi
AC_SUBST([CTAGS])
if test -z "$ETAGS"; then
ETAGS=etags
fi
AC_SUBST([ETAGS])
if test -z "$CSCOPE"; then
CSCOPE=cscope
fi
AC_SUBST([CSCOPE])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
fi
dnl The trailing newline in this macro's definition is deliberate, for
dnl backward compatibility and to allow trailing 'dnl'-style comments
dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST([install_sh])])
# Copyright (C) 2003-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAKE_INCLUDE()
# -----------------
# Check whether make has an 'include' directive that can support all
# the idioms we need for our automatic dependency tracking code.
AC_DEFUN([AM_MAKE_INCLUDE],
[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
cat > confinc.mk << 'END'
am__doit:
@echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
am__include="#"
am__quote=
# BSD make does it like this.
echo '.include "confinc.mk" # ignored' > confmf.BSD
# Other make implementations (GNU, Solaris 10, AIX) do it like this.
echo 'include confinc.mk # ignored' > confmf.GNU
_am_result=no
for s in GNU BSD; do
AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
AS_CASE([$?:`cat confinc.out 2>/dev/null`],
['0:this is the am__doit target'],
[AS_CASE([$s],
[BSD], [am__include='.include' am__quote='"'],
[am__include='include' am__quote=''])])
if test "$am__include" != "#"; then
_am_result="yes ($s style)"
break
fi
done
rm -f confinc.* confmf.*
AC_MSG_RESULT([${_am_result}])
AC_SUBST([am__include])])
AC_SUBST([am__quote])])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
[whether $CC understands -c and -o together],
[am_cv_prog_cc_c_o],
[AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
(exit $ac_status); }])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[[\\\"\#\$\&\'\`$am_lf]]*)
AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
if test "$[2]" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
[AC_MSG_CHECKING([that generated files are newer than configure])
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
AC_MSG_RESULT([done])])
rm -f conftest.file
])
# Copyright (C) 2009-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
[--enable-silent-rules],
[less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
[--disable-silent-rules],
[verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
[am_cv_make_support_nested_variables],
[if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
dnl Using '$V' instead of '$(V)' breaks IRIX make.
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Copyright (C) 2006-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
m4_if([$1], [v7],
[am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1],
[ustar],
[# The POSIX 1988 'ustar' format is defined with fixed-size fields.
# There is notably a 21 bits limit for the UID and the GID. In fact,
# the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
# and bug#13588).
am_max_uid=2097151 # 2^21 - 1
am_max_gid=$am_max_uid
# The $UID and $GID variables are not portable, so we need to resort
# to the POSIX-mandated id(1) utility. Errors in the 'id' calls
# below are definitely unexpected, so allow the users to see them
# (that is, avoid stderr redirection).
am_uid=`id -u || echo unknown`
am_gid=`id -g || echo unknown`
AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
if test $am_uid -le $am_max_uid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi
AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
if test $am_gid -le $am_max_gid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi],
[pax],
[],
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Go ahead even if we have the value already cached. We do so because we
# need to set the values for the 'am__tar' and 'am__untar' variables.
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
for _am_tool in $_am_tools; do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar; do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works.
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar /dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
wmhdplop-0.9.12/procstat.c 0000644 0002074 0002074 00000016046 13655747211 012403 0000000 0000000 #include
#include
#include
#include "global.h"
#include "procstat.h"
#include "devnames.h"
static ProcStats ps;
int use_proc_diskstats;
void pstat_init(struct pstat *pst, long nslice, float update_interval) {
pst->nslice = nslice;
ALLOC_VEC(pst->slices, nslice);
pst->cur_slice = 0;
pst->total = 0;
pst->update_interval = update_interval;
}
float pstat_current(struct pstat *pst) {
long idx = pst->cur_slice ? pst->cur_slice-1 : pst->nslice-1;
return pst->slices[idx]/pst->update_interval;
}
void pstat_add(struct pstat *pst, unsigned long v) {
pst->slices[pst->cur_slice] += v;
}
void pstat_advance(struct pstat *pst) {
unsigned long v = pst->slices[pst->cur_slice];
if (pst->total)
pst->slices[pst->cur_slice] -= pst->total;
else pst->slices[pst->cur_slice] = 0;
pst->total = v;
if (++pst->cur_slice >= pst->nslice) pst->cur_slice = 0;
pst->slices[pst->cur_slice] = 0;
}
float pstat_meanval(struct pstat *pst) {
unsigned long sum = 0;
int i;
for (i = 0; i < pst->nslice; ++i) sum += pst->slices[i];
return sum / pst->update_interval / (pst->nslice-1);
}
float get_read_throughput() {
return pstat_current(&ps.disk_read) / 2048.; /* 2048 because we log sector counts */
}
float get_write_throughput() {
return pstat_current(&ps.disk_write) / 2048.;
}
float get_swapin_throughput() {
return pstat_current(&ps.swap_in) / 2048.;
}
float get_swapout_throughput() {
return pstat_current(&ps.swap_out) / 2048.;
}
float get_read_mean_throughput() {
return pstat_meanval(&ps.disk_read) / 2048.;
}
float get_write_mean_throughput() {
return pstat_meanval(&ps.disk_write) / 2048.;
}
void update_stats() {
FILE *f;
char line[1024];
char hdname[200];
int readok = 0;
const char *proc_fname;
if (!use_proc_diskstats) proc_fname = "/proc/partitions";
else proc_fname = "/proc/diskstats";
f = fopen(proc_fname, "r");
if (!f) { perror(proc_fname); return; }
while (fgets(line, sizeof(line), f)) {
int major, minor;
unsigned long nr, nw;
const char *fmt = use_proc_diskstats ?
"%d %d %200s %*d %*d %lu %*d %*d %*d %lu" :
"%d %d %*u %200s %*d %*d %lu %*d %*d %*d %lu";
if (sscanf(line, fmt, &major, &minor, hdname, &nr, &nw) == 5 ||
(use_proc_diskstats && is_partition(major,minor) &&
/* .. kernel 2.5 uses a different format for partitions and disc */
sscanf(line, "%d %d %200s %*d %lu %*d %lu", &major, &minor, hdname, &nr, &nw) == 5)) {
DiskList *dl;
if (readok == 0) readok = 1;
if ((dl=find_dev(major,minor))) {
dl->touched_r = (dl->nr - nr) ? 10 : dl->touched_r;
dl->touched_w = (dl->nw - nw) ? 10 : dl->touched_w;
dl->nr = nr; dl->nw = nw;
if (is_displayed(dl->hd_id,dl->part_id) &&
((dl->part_id && (!find_id(dl->hd_id, 0) || !is_displayed(dl->hd_id, 0))) || /* partition without host disk */
(dl->part_id == 0))) /* disk */
{
if (!Prefs.debug_disk_rd) {
pstat_add(&ps.disk_read, nr);
} else {
static long cntr = 0; cntr+=(rand()%30) == 0 ? Prefs.debug_disk_rd : 0;
pstat_add(&ps.disk_read, nr + cntr);
}
if (!Prefs.debug_disk_wr) {
pstat_add(&ps.disk_write, nw);
} else {
static long cntw = 0; cntw+=(rand()%30) == 0 ? Prefs.debug_disk_wr : 0;
pstat_add(&ps.disk_write, nw + cntw);
}
readok = 2;
}
}
/* if (in_our_disk || find_dev(major,minor))*/ {
strlist *sl;
for (sl = swap_list(); sl; sl=sl->next) {
if (strcmp(stripdev(hdname), stripdev(sl->s)) == 0) {
if (!Prefs.debug_swapio) {
pstat_add(&ps.swap_in, nr);
pstat_add(&ps.swap_out, nw);
} else {
static long cnt = 0; cnt+=Prefs.debug_swapio;
pstat_add(&ps.swap_in, nr + cnt);
pstat_add(&ps.swap_out, nw + cnt);
}
}
}
}
}
}
fclose(f);
pstat_advance(&ps.disk_read);pstat_advance(&ps.disk_write);
pstat_advance(&ps.swap_in);pstat_advance(&ps.swap_out);
if (readok == 0) { fprintf(stderr, "warning: could not find any info in %s (kernel too old?)\n", proc_fname); exit(1); }
else if (readok == 1) { ONLY_ONCE(fprintf(stderr, "warning: could not find any monitored disc in %s\n", proc_fname)); }
BLAHBLAH(1,printf("swap: %5.2f,%5.2f disc: %5.2f,%5.2f MB/s\n",
get_swapin_throughput(), get_swapout_throughput(),
get_read_throughput(), get_write_throughput()));
}
void init_stats(float update_interval) {
char s[512];
FILE *f;
pstat_init(&ps.swap_in, (long)(0.5/update_interval)+1, update_interval);
pstat_init(&ps.swap_out, (long)(0.5/update_interval)+1, update_interval);
pstat_init(&ps.disk_read, (long)(0.5/update_interval)+1, update_interval);
pstat_init(&ps.disk_write, (long)(0.5/update_interval)+1, update_interval);
f = fopen("/proc/swaps","r");
//if (!f) { perror("/proc/swaps"); exit(1); }
if (f) {
while (fgets(s, 512, f)) {
char *s2 = strchr(s,' ');
if (s2 && s2 != s && strncmp(s, "/dev/", 5) == 0) {
*s2 = 0;
add_swap(s);
BLAHBLAH(1,printf("found swap partition: %s\n", swap_list()->s));
}
}
fclose(f);
}
if (!swap_list()) {
fprintf(stderr, "Warning: no swap partition found in /proc/swaps !!\n");
}
if ((f=fopen("/proc/diskstats","r"))) {
use_proc_diskstats = 1; fclose(f);
}
else { use_proc_diskstats = 0; }
BLAHBLAH(1,printf("using %s for disc statistics\n", use_proc_diskstats ? "/proc/diskstats" : "/proc/partitions"));
}
/* hello I am brain-dead */
void scan_all_hd(int add_partitions) {
char s[512];
FILE *f = NULL;
/* find mounted partitions */
if (add_partitions && (f = fopen("/etc/mtab","r"))) {
while (fgets(s,512,f)) {
char partname[512], mountpoint[512];
mountpoint[0] = 0;
if (sscanf(s,"%500s %500s", partname, mountpoint)>=1) {
char *p = strchr(mountpoint, '/');
//printf("add_device_by_name(%s, %s)\n", partname, p);
add_device_by_name(partname, p);
}
}
}
if (f) fclose(f);
/* second try .. look for hard drives listed in proc/partitions (and only hard-drives .. their partitions
are supposed to be listed in mtab) */
if ((f = fopen("/proc/partitions","r"))) {
while (fgets(s,512,f)) {
unsigned major, minor;
char name[512]; name[0] = 0;
if (sscanf(s,"%d %d %*d %500s", &major, &minor, name)==3) {
int hd_id, part_id;
/* on n'ajoute que les disques dont au moins une partoche etait dans mtab */
if (device_info(major,minor,NULL,&hd_id,&part_id) != 0 && part_id == 0 && find_id(hd_id,-1)) {
add_device_by_id(major,minor,NULL);
}
}
}
}
if (f) fclose(f);
/* for (c = 'a'; c <= 'z'; ++c) {
snprintf(s,512,"/proc/ide/hd%c/media",c);
if ((f = fopen(s,"r")) && fgets(s, 512, f) && strcmp(s, "disk\n")==0) {
snprintf(s, 512, "/dev/hd%c",c);
add_device(s, NULL);
}
if (f) fclose(f);
}*/
}
wmhdplop-0.9.12/gkrellm_hdplop.c 0000644 0002074 0002074 00000033060 14301766542 013537 0000000 0000000 /*
*
* gkrellm_hdplop.c
* dae (jolly.frederic@fnac.net)
*
* gkrellm plugin for wmhdplop:
* http://hules.free.fr/wmhdplop/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
*/
#include
#include
#include
#include
#include
#include "config.h"
#include "global.h"
#include "wmhdplop.h"
#define PLUGIN_VERSION VERSION
#define PLUGIN_NAME "gkhdplop"
#define PLUGIN_DESC "wmhdplop gkrellm port"
#define PLUGIN_URL "http://hules.free.fr/wmhdplop/"
#define PLUGIN_STYLE PLUGIN_NAME
#define PLUGIN_KEYWORD PLUGIN_NAME
static GkrellmMonitor *mon = NULL;
static GkrellmChart *chart = NULL;
static GkrellmChartconfig *chart_config = NULL;
#define TIMER1 50 /* main updates every 40 ms */
#define TIMER2 50 * TIMER1 /* small updates every 1600 ms */
#define PLUGIN_HEIGHT 64
static gint timeout_id;
static int option_timer = 0;
/* Options stuffs */
GtkWidget *swap_check = NULL;
GtkWidget *io_check = NULL;
GtkWidget *leds_check = NULL;
GtkWidget *colormap = NULL;
GtkWidget *hdlist_check = NULL;
GtkWidget *throughput_threshold = NULL;
GtkWidget *hddtemp_check = NULL;
GtkWidget *entry_smallfont = NULL, *entry_bigfont = NULL;
static gboolean update_plugin(void)
{
GdkEventExpose event;
gint ret_val;
gtk_signal_emit_by_name(GTK_OBJECT(chart->drawing_area), "expose_event", &event, &ret_val);
return TRUE; /* restart timer */
}
static gint chart_expose_event(GtkWidget *widget UNUSED, GdkEventExpose *ev UNUSED)
{
int update_options = 0;
option_timer++;
if (option_timer == TIMER2 / TIMER1) {
option_timer = 0;
update_options = 1;
}
gkrellm_hdplop_update(update_options);
gkrellm_draw_chart_to_screen(chart);
return TRUE;
}
static gint wheel_event(GtkWidget *widget UNUSED, GdkEventScroll *ev)
{
if (ev->direction == GDK_SCROLL_UP)
next_displayed_hd(); //change_displayed_hd(+1);
else if (ev->direction == GDK_SCROLL_DOWN)
prev_displayed_hd(); //change_displayed_hd(-1);
return TRUE;
}
static gint button_release_event(GtkWidget *widget UNUSED, GdkEventButton *ev, gpointer data UNUSED)
{
if (ev->button == 3) {
gkrellm_open_config_window(mon);
} else if (ev->button == 1) {
change_displayed_hd(+1);
}
return TRUE;
}
static void disable_plugin(void)
{
if (timeout_id)
gtk_timeout_remove(timeout_id);
timeout_id = 0;
}
static void create_plugin(GtkWidget *vbox, gint first_create)
{
if(first_create) {
chart = gkrellm_chart_new0();
}
gkrellm_set_chart_height_default(chart, PLUGIN_HEIGHT);
gkrellm_chart_create(vbox, mon, chart, &chart_config);
if (first_create) {
hdplop_main(chart->w, chart->h, chart->drawing_area->window);
} else {
dockimlib2_gkrellm_xinit(app->dock, chart->drawing_area->window);
reshape(chart->w, chart->h);
}
if (first_create) {
//printf("chart : w=%d, h=%d\n", chart->w, chart->h);
gtk_signal_connect(GTK_OBJECT(chart->drawing_area),
"expose_event", (GtkSignalFunc) chart_expose_event, NULL);
gtk_signal_connect(GTK_OBJECT(chart->drawing_area),
"button_release_event", GTK_SIGNAL_FUNC(button_release_event), NULL);
g_signal_connect(G_OBJECT(chart->drawing_area),
"scroll_event", G_CALLBACK(wheel_event), NULL);
}
/* Update plugin every TIMER1 ms */
if (!timeout_id)
timeout_id = g_timeout_add(TIMER1, (GtkFunction) update_plugin, NULL);
gkrellm_disable_plugin_connect(mon, disable_plugin);
}
static void option_toggled_cb(GtkToggleButton *button, gpointer user_data UNUSED)
{
gboolean active = gtk_toggle_button_get_active(button);
GtkWidget *togglebutton = GTK_WIDGET(button);
if (togglebutton == swap_check) {
Prefs.disable_swap_matrix = !active;
}
else if (togglebutton == io_check) {
Prefs.disable_io_matrix = !active;
}
else if (togglebutton == hdlist_check) {
if (active) {
Prefs.hdlist_pos = AL_BOTTOM + AL_LEFT;
gtk_widget_set_sensitive(leds_check, TRUE);
gtk_widget_set_sensitive(hddtemp_check, TRUE);
}
else {
Prefs.hdlist_pos = AL_NONE;
gtk_widget_set_sensitive(leds_check, FALSE);
gtk_widget_set_sensitive(hddtemp_check, FALSE);
}
}
else if (togglebutton == leds_check) {
Prefs.disable_hd_leds = !active;
}
else if (togglebutton == hddtemp_check) {
Prefs.enable_hddtemp = active;
app->displayed_hd_changed = 1;
}
}
static void cb_colormap_modified(GtkWidget *widget UNUSED, GtkSpinButton *spin)
{
Prefs.iomatrix_colormap = gtk_spin_button_get_value_as_int(spin);
}
static void cb_spinbutton_modified(GtkWidget *widget UNUSED, GtkSpinButton *spin)
{
if (GTK_WIDGET(spin) == throughput_threshold) {
Prefs.popup_throughput_threshold = gtk_spin_button_get_value_as_float(spin);
}
}
static void cb_reload_fonts(GtkWidget *widget) {
(void) widget;
if (strcmp(gtk_entry_get_text(GTK_ENTRY(entry_smallfont)), app->current_smallfont_name) ||
strcmp(gtk_entry_get_text(GTK_ENTRY(entry_bigfont)), app->current_bigfont_name)) {
ASSIGN_STRING(Prefs.smallfontname, gtk_entry_get_text(GTK_ENTRY(entry_smallfont)));
ASSIGN_STRING(Prefs.bigfontname, gtk_entry_get_text(GTK_ENTRY(entry_bigfont)));
init_fonts(app);
if (app->smallfont == NULL) {
gkrellm_config_message_dialog("font problem..", "could not load the small font");
} else gtk_entry_set_text(GTK_ENTRY(entry_smallfont), app->current_smallfont_name);
if (app->bigfont == NULL) {
gkrellm_config_message_dialog("font problem..", "could not load the big font");
} else gtk_entry_set_text(GTK_ENTRY(entry_bigfont), app->current_bigfont_name);
/* force recomputations of some dimensions */
app->displayed_hd_changed = 1; app->reshape_cnt++;
}
}
static void create_plugin_tab(GtkWidget *tab_vbox)
{
GtkWidget *tabs = NULL;
GtkWidget *options_tab = NULL;
GtkWidget *info_tab = NULL;
GtkWidget *info = NULL;
GtkWidget *about_tab = NULL;
GtkWidget *about = NULL;
GtkWidget *main_box;
static gchar *info_text[] =
{
"" PLUGIN_NAME "\n\n",
PLUGIN_DESC "\n\n",
"improve your productivity with " PLUGIN_NAME ":\n",
"It monitors your hard-drives by sending visual stimuli to your cortex\n",
"each time your /dev/hdx writes or reads anything.\n",
"Try to launch openoffice and enjoy the gkhdplop show!\n\n",
"Usage:\n\n",
"- Change the hard drive with the mouse wheel\n",
"- Animation reflecting swap activity...\n",
"- Background animation reflecting disk activity...\n",
"- Small led indicating disk activity...\n",
"- Several glittering color schemes...\n",
"- Popup display with the io throughput...\n",
};
static gchar *about_text =
_(
PLUGIN_NAME " " PLUGIN_VERSION "\n"
"a " PLUGIN_DESC "\n\n"
"Copyright (c) 2004 dae\n"
"jolly.frederic@fnac.net\n"
"http://quadaemon.free.fr\n\n"
"Based on wmhdplop\nCopyright (c) 2003,2004 pouaite\n"
PLUGIN_URL "\n\n"
"Released under the GNU Public License"
);
tabs = gtk_notebook_new();
gtk_notebook_set_tab_pos(GTK_NOTEBOOK(tabs), GTK_POS_TOP);
gtk_box_pack_start(GTK_BOX(tab_vbox), tabs, TRUE, TRUE, 0);
/* Options tab */
options_tab = gkrellm_gtk_notebook_page(tabs, _("Options"));
main_box = gtk_vbox_new(FALSE, 0);
gtk_widget_set_name(main_box, "main_box");
gtk_widget_ref(main_box);
gtk_object_set_data_full(GTK_OBJECT (options_tab), "main_box", main_box,
(GtkDestroyNotify) gtk_widget_unref);
gtk_widget_show(main_box);
gtk_container_add(GTK_CONTAINER (options_tab), main_box);
/* io button */
gkrellm_gtk_check_button_connected(main_box, &io_check, !Prefs.disable_io_matrix, 1, 1, 0,
option_toggled_cb, NULL, _("Show disk activity"));
/* swap button */
gkrellm_gtk_check_button_connected(main_box, &swap_check, !Prefs.disable_swap_matrix, 1, 1, 0,
option_toggled_cb, NULL, _("Show swap activity"));
/* hdlist button */
gkrellm_gtk_check_button_connected(main_box, &hdlist_check,
(Prefs.hdlist_pos == AL_NONE)?FALSE:TRUE, 1, 1, 0,
option_toggled_cb, NULL, _("Show disk name"));
/* leds button */
gkrellm_gtk_check_button_connected(main_box, &leds_check, !Prefs.disable_hd_leds, 1, 1, 0,
option_toggled_cb, NULL, _("Led indicating disk activity"));
gtk_widget_set_sensitive(leds_check, (Prefs.hdlist_pos == AL_NONE)?FALSE:TRUE);
/* hddtemp button */
gkrellm_gtk_check_button_connected(main_box, &hddtemp_check, Prefs.enable_hddtemp, 1, 1, 0,
option_toggled_cb, NULL,
_("Display hd temperature (requires hddtemp daemon running on port 7634)"));
gtk_widget_set_sensitive(hddtemp_check, (Prefs.hdlist_pos == AL_NONE)?FALSE:TRUE);
/* colormap spin button */
gkrellm_gtk_spin_button(main_box, NULL, Prefs.iomatrix_colormap, 0, 4, 1, 1, 0, 0,
cb_colormap_modified, NULL, FALSE, _("Colormap"));
/* threshold spin button */
gkrellm_gtk_spin_button(main_box, &throughput_threshold, Prefs.popup_throughput_threshold, 0., 500, 0.1, 1, 1, 0,
cb_spinbutton_modified, NULL, FALSE, _("minimum io throughput (MB/s)"));
{
GtkWidget *frame = gtk_frame_new("Fonts");
gtk_box_pack_start(GTK_BOX(main_box), frame, TRUE, FALSE, 0);
GtkWidget *hbox0 = gtk_hbox_new(FALSE, 4);
gtk_container_add(GTK_CONTAINER(frame), hbox0);
GtkWidget *vbox = gtk_vbox_new(FALSE, 0);
gtk_box_pack_start(GTK_BOX(hbox0), vbox, TRUE, FALSE, 0);
GtkWidget *hbox = gtk_hbox_new(FALSE, 0);
gtk_box_pack_start(GTK_BOX(vbox), hbox, TRUE, FALSE, 0);
entry_smallfont = gtk_entry_new();
gtk_box_pack_start(GTK_BOX(hbox), entry_smallfont, TRUE, FALSE, 0);
GtkWidget *pLabel = gtk_label_new("Small font (without .ttf extension):");
gtk_entry_set_text(GTK_ENTRY(entry_smallfont), app->current_smallfont_name);
gtk_box_pack_start(GTK_BOX(hbox), pLabel, TRUE, FALSE, 0);
hbox = gtk_hbox_new(FALSE, 0);
gtk_box_pack_start(GTK_BOX(vbox), hbox, TRUE, FALSE, 0);
entry_bigfont = gtk_entry_new();
gtk_box_pack_start(GTK_BOX(hbox), entry_bigfont, TRUE, FALSE, 0);
gtk_entry_set_text(GTK_ENTRY(entry_bigfont), app->current_bigfont_name);
pLabel = gtk_label_new("Big font (without .ttf extension)");
gtk_box_pack_start(GTK_BOX(hbox), pLabel, TRUE, FALSE, 0);
gkrellm_gtk_button_connected(hbox0, NULL, TRUE/* expand*/, TRUE /* fill*/, 0 /*pad*/,
G_CALLBACK(cb_reload_fonts), NULL, "reload fonts");
}
/* Info tab */
info_tab = gkrellm_gtk_framed_notebook_page(tabs, _("Info"));
info = gkrellm_gtk_scrolled_text_view(info_tab, NULL, GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC);
gkrellm_gtk_text_view_append_strings(info, info_text, sizeof(info_text) / sizeof(gchar *));
/* About tab */
about_tab = gkrellm_gtk_notebook_page(tabs, _("About"));
about = gtk_label_new(about_text);
gtk_box_pack_start(GTK_BOX(about_tab), about, TRUE, TRUE, 0);
}
static void save_plugin_config(FILE *f)
{
fprintf(f, "%s options %d %d %d %d %d %d %f smallfont=%s bigfont=%s\n", PLUGIN_KEYWORD,
Prefs.disable_swap_matrix,
Prefs.disable_io_matrix,
Prefs.disable_hd_leds,
Prefs.hdlist_pos,
Prefs.enable_hddtemp,
Prefs.iomatrix_colormap,
Prefs.popup_throughput_threshold,
app->current_smallfont_name, app->current_bigfont_name);
}
static void load_plugin_config(gchar *config_line)
{
char sf[1000], bf[1000]; sf[0] = bf[0] = 0;
int n =sscanf(config_line, "options %d %d %d %d %d %d %f smallfont=%1000s bigfont=%1000s",
&Prefs.disable_swap_matrix,
&Prefs.disable_io_matrix,
&Prefs.disable_hd_leds,
&Prefs.hdlist_pos,
&Prefs.enable_hddtemp,
&Prefs.iomatrix_colormap,
&Prefs.popup_throughput_threshold,
sf, bf);
if (n>= 8) Prefs.smallfontname = strdup(sf);
if (n>= 9) Prefs.bigfontname = strdup(bf);
}
static GkrellmMonitor hdplop_mon =
{
PLUGIN_NAME, /* Name, for config tab. */
0, /* Id, 0 if a plugin */
create_plugin, /* The create_plugin() function */
NULL, /* The update_plugin() function */
create_plugin_tab, /* The create_plugin_tab() config function */
NULL, /* The apply_plugin_config() function */
save_plugin_config, /* The save_plugin_config() function */
load_plugin_config, /* The load_plugin_config() function */
PLUGIN_KEYWORD, /* config keyword */
NULL, /* Undefined 2 */
NULL, /* Undefined 1 */
NULL, /* private */
MON_CPU, /* Insert plugin before this monitor. */
NULL, /* Handle if a plugin, filled in by GKrellM */
NULL /* path if a plugin, filled in by GKrellM */
};
GkrellmMonitor *gkrellm_init_plugin(void)
{
gkrellm_add_meter_style(&hdplop_mon, PLUGIN_STYLE);
return (mon = &hdplop_mon);
}
wmhdplop-0.9.12/global.h 0000644 0002074 0002074 00000003154 13655747211 012005 0000000 0000000 #ifndef GLOBAL_H
#define GLOBAL_H
//#include "config.h"
#ifdef __GNUC__
# define UNUSED __attribute((unused))
#else
# define UNUSED
#endif
#ifdef GLOBALS_HERE
# define DECL_GLOB(x) x;
# define DECL_GLOB_INIT(x,y) x = y
#else
# define DECL_GLOB(x) extern x
# define DECL_GLOB_INIT(x,y) extern x
#endif
#ifndef NO_BLAHBLAH
# define BLAHBLAH(n,x) if (Prefs.verbosity >= n) { x; fflush(stdout); }
#else
# define BLAHBLAH(n,x)
#endif
#ifndef NO_BITFIELDS
# define BITFIELD(n) :n
#else
# define BITFIELD(n)
#endif
#include "dockapp_imlib2.h"
typedef enum { AL_NONE=0, AL_LEFT=1, AL_HCENTER=2, AL_RIGHT=4, AL_TOP=8, AL_VCENTER=16,AL_BOTTOM=32} align_enum;
typedef struct {
int verbosity;
int enable_hddtemp; /* enable querying and display of hd temp */
unsigned hddtemp_port;
int enable_power_status; /* enable querying of power status */
int disable_swap_matrix; /* disable the animation reflecting swap activity */
int disable_io_matrix; /* disable background animation reflecting disk activity */
int disable_hd_leds; /* hide the small led indicating disk activity (if !disable_hd_leds) */
int disable_hd_list; /* hide the list of monitored drives */
char *bigfontname, *smallfontname; /* ttf font name + "/size" in pixels */
float popup_throughput_threshold;
unsigned iomatrix_colormap;
unsigned debug_swapio, debug_disk_wr, debug_disk_rd;
unsigned popup_throughput_pos, hdlist_pos;
int temperatures_unit; /* 'C' or 'F' */
DockImlib2Prefs xprefs;
} structPrefs;
DECL_GLOB(structPrefs Prefs);
#define ASSIGN_STRING(a,v) { if (a) { free(a); a = NULL; } a = strdup(v); assert(a); }
#endif
wmhdplop-0.9.12/wmhdplop.desktop 0000644 0002074 0002074 00000000300 13655747211 013607 0000000 0000000 [Desktop Entry]
Type=Application
Name=wmhdplop
Comment=A hard drive monitor dockapp for Window Maker
Exec=wmhdplop
Categories=System;Monitor;
Keywords=hard drive;monitor;dockapp;window maker;
wmhdplop-0.9.12/util.c 0000644 0002074 0002074 00000015424 13655747211 011520 0000000 0000000 #include
#include
#include
#include "util.h"
char *
str_dup(const char *src) {
char *s;
s = strdup(src);
if (s == NULL) abort();
return s;
}
/*
verifie si la chaine est vide (cad si elle ne contient que des caractères non imprimables
*/
int
str_is_empty(const char *s) {
int i;
if (s == NULL) return 1;
else if (strlen(s) == 0) return 1;
else {
i = 0;
while (s[i] && s[i] <= ' ') i++;
return (i == (int)strlen(s));
}
}
/* recherche la première occurence d'une des chaines 'keys' dans 'src' et renvoie un pointeur vers
cette occurence, ainsi que le numéro de la 'keys' trouvée
bien sûr c'est pas optimal du tout, mais ON S'EN FOUT(tm)
et oui, effectivement, 'str_multi_str' est un nom à la con
*/
char *
str_multi_str(const char *src, const char **keys, int nb_keys, int *key_idx)
{
int i;
const char *res;
assert(key_idx);
*key_idx = 0;
res = NULL;
for (i=0; i < nb_keys; i++) {
const char *p;
p = strstr(src, keys[i]);
if (p && (res==NULL || p < res)) { res = p; *key_idx = i; }
}
return (char*)res;
}
/* renvoie une chaine (allouée correctement) contenant la substitution de toutes les occurences de
'key' dans 'src' par 'substitution' (key et substition sont des tableaux de chaines de
caractères, car pour faire plusieurs substitutions, mieux vaut les effectuer simultanement que
les enchainer pour eviter les effets de bords
*/
char *
str_multi_substitute(const char *src, const char **keys, const char **substitutions, int nkeys)
{
const char *p, *p_key;
char *dest, *p_dest;
int dest_sz, p_len,j;
if (src == NULL) return NULL;
/* calcul de la longueur de la destination.. */
p = src;
dest_sz = strlen(src)+1;
while ((p_key=str_multi_str(p, keys, nkeys, &j))) {
dest_sz += (strlen(substitutions[j]) - strlen(keys[j]));
p = p_key+strlen(keys[j]);
}
dest = malloc(dest_sz);
/* et là PAF ! */
p = src;
p_dest = dest;
while ((p_key=str_multi_str(p, keys, nkeys, &j))) {
memcpy(p_dest, p, p_key-p);
p_dest += p_key-p;
memcpy(p_dest, substitutions[j], strlen(substitutions[j]));
p_dest += strlen(substitutions[j]);
p = p_key + strlen(keys[j]);
}
p_len = strlen(p);
if (p_len) {
memcpy(p_dest, p, p_len); p_dest += p_len;
}
*p_dest = 0;
assert(p_dest - dest == dest_sz-1); /* capote à bugs */
return dest;
}
char *
str_substitute(const char *src, const char *key, const char *substitution) {
return str_multi_substitute(src, &key, &substitution, 1);
}
/* quotage pour les commandes externes.. à priori c'est comme pour open_url
mais bon.. je me refuse à donner la moindre garantie sur la sécurité
be aware
*/
char *
shell_quote(const char *src)
{
char *quote = "&;`'\\\"|*?~<>^()[]{}$ ";
int i,dest_sz;
const char *p;
char *dest;
if (src == NULL || strlen(src) == 0) return strdup("");
dest_sz = strlen(src)+1;
for (p=src; *p; p++) {
if (strchr(quote, *p)) dest_sz+=1;
}
dest = malloc(dest_sz);
for (p=src, i=0; *p; p++) {
if (strchr(quote, *p)) {
dest[i++] = '\\';
}
if (*p>=0 && *p < ' ') {
dest[i++] = ' ';
} else {
dest[i++] = *p;
}
}
dest[i] = 0;
assert(i == dest_sz-1); /* kapeaute à beugue */
return dest;
}
static unsigned *crc_table = NULL;
void gen_crc_table(void) /* build the crc table */
{
unsigned crc, poly;
int i, j;
poly = 0xEDB88320;
for (i = 0; i < 256; i++)
{
crc = i;
for (j = 8; j > 0; j--)
{
if (crc & 1)
crc = (crc >> 1) ^ poly;
else
crc >>= 1;
}
crc_table[i] = crc;
}
}
unsigned str_hash(const unsigned char *s, int max_len) /* calculate the crc value */
{
unsigned crc;
int i;
if (crc_table == NULL) {
crc_table = calloc(256, sizeof(unsigned));
gen_crc_table();
}
crc = 0xFFFFFFFF;
for (i=0; i < max_len && s[i]; i++) {
crc = ((crc>>8) & 0x00FFFFFF) ^ crc_table[ (crc^s[i]) & 0xFF ];
}
return( crc^0xFFFFFFFF );
}
unsigned char char_trans[256];
static int char_trans_init = 0;
static void
init_char_trans()
{
const unsigned char *trans_accents =
(const unsigned char*) "éèëêÊËÉÈàâáäÀÂÁÄûüùÙçÇîïíìÏÎÍÌôóòõÔÓÒÕñ";
const unsigned char *trans_accents2 =
(const unsigned char*) "eeeeeeeeaaaaaaaauuuucciiiiiiiioooooooon";
int i;
for (i=0; i < 256; i++) {
unsigned char *p;
if ((p=(unsigned char*)strchr((char*)trans_accents, i))) {
char_trans[i] = trans_accents2[(p - trans_accents)];
} else if (i < (unsigned char)'A' || i > (unsigned char)'Z') {
char_trans[i] = i;
} else {
char_trans[i] = i + 'a' - 'A';
}
}
char_trans_init = 1;
}
unsigned char
chr_noaccent_tolower(unsigned char c)
{
if (char_trans_init == 0) init_char_trans();
return char_trans[c];
}
void
str_noaccent_tolower(unsigned char *s)
{
int i;
if (s == NULL) return;
if (char_trans_init == 0) init_char_trans();
i = 0; while(s[i]) {
s[i] = char_trans[s[i]]; i++;
}
}
unsigned char *
str_noaccent_casestr(const unsigned char *meule, const unsigned char *aiguille)
{
unsigned char *res;
char *m = strdup((char*)meule);
char *a = strdup((char*)aiguille);
str_noaccent_tolower((unsigned char*)m);
str_noaccent_tolower((unsigned char*)a);
res = (unsigned char*)strstr(m, a);
free(a); free(m);
return res;
}
/* un printf pas très fin, mais avec allocation dynamique..
c'est pratique ces ptites choses */
char *
str_printf(const char *fmt, ...)
{
va_list ap;
char *s;
int s_sz;
s_sz = 10; /* a reaugmenter des que la fonction est validee : */
s = malloc(s_sz); assert(s);
while (1) {
int ret;
va_start(ap, fmt);
ret = vsnprintf(s, s_sz, fmt, ap);
va_end(ap);
if (ret == -1 || ret >= s_sz-1) {
s_sz *= 2;
assert(s_sz < 100000);
s = realloc(s, s_sz); assert(s);
} else
break;
}
s = realloc(s, strlen(s)+1); assert(s);
return s;
}
/* read a line in a file and return the result in a dynamically
allocated buffer */
char *
str_fget_line(FILE *f)
{
int i,c;
char *s;
int s_sz;
s_sz = 100; s = malloc(s_sz); assert(s);
i = 0;
while ((c = fgetc(f)) > 0) {
if (c >= ' ' || c == '\t') {
s[i++] = c;
if (i == s_sz) {
s_sz *= 2; assert(s_sz < 100000);
s = realloc(s, s_sz); assert(s);
}
}
if (c == '\n') break;
}
s[i] = 0; assert(i < s_sz);
s = realloc(s, strlen(s)+1); assert(s);
return s;
}
/* remove spaces at the beginning and at the end */
void
str_trim(unsigned char *s) {
int i,j;
if (s == NULL) return;
j = strlen((char*)s)-1;
while (j>=0 && s[j] <= ' ') s[j--] = 0;
i = 0;
while (s[i] && s[i] <= ' ') i++;
if (i<=j) {
memmove(s, s+i, j+2-i);
}
}
/* insertion into a string list */
strlist *strlist_ins(strlist *head, const char *s) {
strlist *p; ALLOC_OBJ(p);
p->s = strdup(s); p->next = head; return p;
}
wmhdplop-0.9.12/autogen.sh 0000755 0002074 0002074 00000000127 13717260551 012366 0000000 0000000 #! /bin/sh
autoreconf -v --install || exit 1
./configure --enable-maintainer-mode "$@"