Auth-GoogleAuth-1.02/0000775000175200017520000000000013220542104014326 5ustar gryphongryphonAuth-GoogleAuth-1.02/cpanfile0000644000175200017520000000177013220542104016035 0ustar gryphongryphonrequires "Carp" => "0"; requires "Class::Accessor" => "0"; requires "Convert::Base32" => "0"; requires "Digest::HMAC_SHA1" => "0"; requires "Math::Random::MT" => "0"; requires "URI::Escape" => "0"; requires "base" => "0"; requires "perl" => "5.008"; requires "strict" => "0"; requires "warnings" => "0"; on 'test' => sub { requires "File::Spec" => "0"; requires "IO::Handle" => "0"; requires "IPC::Open3" => "0"; requires "Test::More" => "0"; requires "Test::Most" => "0"; requires "constant" => "0"; requires "perl" => "5.008"; }; on 'configure' => sub { requires "ExtUtils::MakeMaker" => "0"; requires "perl" => "5.008"; }; on 'develop' => sub { requires "Pod::Coverage::TrustPod" => "0"; requires "Test::EOL" => "0"; requires "Test::Kwalitee" => "1.21"; requires "Test::More" => "0.88"; requires "Test::NoTabs" => "0"; requires "Test::Pod" => "1.41"; requires "Test::Pod::Coverage" => "1.08"; requires "Test::Portability::Files" => "0"; requires "Test::Synopsis" => "0"; }; Auth-GoogleAuth-1.02/MANIFEST0000644000175200017520000000053213220542104015455 0ustar gryphongryphon# This file was automatically generated by Dist::Zilla::Plugin::Manifest v6.010. Changes LICENSE MANIFEST META.json META.yml Makefile.PL README cpanfile lib/Auth/GoogleAuth.pm t/00-compile.t t/author-eol.t t/author-no-tabs.t t/author-pod-coverage.t t/author-pod-syntax.t t/author-portability.t t/author-synopsis.t t/module.t t/release-kwalitee.t Auth-GoogleAuth-1.02/lib/0000775000175200017520000000000013220542104015074 5ustar gryphongryphonAuth-GoogleAuth-1.02/lib/Auth/0000775000175200017520000000000013220542104015775 5ustar gryphongryphonAuth-GoogleAuth-1.02/lib/Auth/GoogleAuth.pm0000644000175200017520000002565513220542104020404 0ustar gryphongryphonpackage Auth::GoogleAuth; # ABSTRACT: Google Authenticator TBOT Abstraction use 5.008; use strict; use warnings; use base 'Class::Accessor'; use Digest::HMAC_SHA1 'hmac_sha1_hex'; use Math::Random::MT 'rand'; use URI::Escape 'uri_escape'; use Convert::Base32 qw( encode_base32 decode_base32 ); use Carp 'croak'; our $VERSION = '1.02'; # VERSION my @accessors = qw( secret secret32 issuer key_id otpauth ); __PACKAGE__->mk_accessors(@accessors); sub generate_secret32 { my ($self) = @_; my @chars = ( 'a' .. 'z', 2 .. 7 ); return $self->secret32( join( '', @chars[ map { rand( scalar(@chars) ) } 1 .. 16 ] ) ); } sub clear { my ($self) = @_; $self->$_(undef) for (@accessors); return; } sub qr_code { my ( $self, $secret32, $key_id, $issuer, $return_otpauth ) = @_; $self->_secret_check($secret32); $self->key_id($key_id) if ($key_id); $self->issuer($issuer) if ($issuer); $self->key_id('Undefined') unless ( $self->key_id ); $self->issuer('Undefined') unless ( $self->issuer ); $self->otpauth( 'otpauth://totp/' . uri_escape( $self->issuer ) . ':' . uri_escape( $self->key_id ) . '?secret=' . $self->secret32 . '&issuer=' . uri_escape( $self->issuer ) ); return ($return_otpauth) ? $self->otpauth : 'https://chart.googleapis.com/chart?chs=200x200&cht=qr&chl=' . uri_escape( $self->otpauth ); } sub code { my ( $self, $secret32, $timestamp, $interval ) = @_; $self->_secret_check($secret32); $timestamp ||= time; $interval ||= 30; my $hmac = hmac_sha1_hex( pack( 'H*', sprintf( '%016x', int( $timestamp / $interval ) ) ), _decode_base32( $self->secret32 ), ); return sprintf( '%06d', ( hex( substr( $hmac, hex( substr( $hmac, -1 ) ) * 2, 8 ) ) & 0x7fffffff ) % 1000000 ); } sub verify { my ( $self, $code, $range, $secret32, $timestamp, $interval ) = @_; $self->_secret_check($secret32); $code ||= ''; $range ||= 0; $timestamp ||= time; $interval ||= 30; croak('Range value not zero or a positive number') unless ( $range =~ /^\d+$/ and $range >= 0 ); for ( 0 .. $range ) { return 1 if ( not $_ and $code eq $self->code( $secret32, $timestamp, $interval ) or $code eq $self->code( $secret32, $timestamp + $interval * $_, $interval ) or $code eq $self->code( $secret32, $timestamp - $interval * $_, $interval ) ); } return 0; } sub _secret_check { my ( $self, $secret32 ) = @_; if ($secret32) { $self->secret32($secret32); $self->secret( _decode_base32($secret32) ); } if ( not $self->secret32 ) { if ( not $self->secret ) { $self->secret( _decode_base32( $self->generate_secret32 ) ); } else { $self->secret32( encode_base32( $self->secret ) ); } } return; } sub _decode_base32 { my ($data) = @_; my $rv; eval{ $rv = decode_base32($data) }; croak("Error decoding what should be base32 data: $data") if ( $@ =~ /Data contains non-base32 characters/ ); return $rv; } 1; __END__ =pod =encoding UTF-8 =head1 NAME Auth::GoogleAuth - Google Authenticator TBOT Abstraction =head1 VERSION version 1.02 =for markdown [![Build Status](https://travis-ci.org/gryphonshafer/Auth-GoogleAuth.svg)](https://travis-ci.org/gryphonshafer/Auth-GoogleAuth) [![Coverage Status](https://coveralls.io/repos/gryphonshafer/Auth-GoogleAuth/badge.png)](https://coveralls.io/r/gryphonshafer/Auth-GoogleAuth) =head1 SYNOPSIS use Auth::GoogleAuth; my $auth = Auth::GoogleAuth->new; $auth = Auth::GoogleAuth->new({ secret => 'some secret string thing', issuer => 'Gryphon Shafer', key_id => 'gryphon@cpan.org', }); $auth->secret(); # get/set $auth->secret32(); # get/set $auth->issuer(); # get/set $auth->key_id(); # get/set my $secret32 = $auth->generate_secret32; $auth->clear; my $url_0 = $auth->qr_code; my $url_1 = $auth->qr_code( 'bv5o3disbutz4tl3', # secret32 'gryphon@cpan.org', # key_id 'Gryphon Shafer', # issuer ); my $url_2 = $auth->qr_code( 'bv5o3disbutz4tl3', 'gryphon@cpan.org', 'Gryphon Shafer', 1, ); my $otpauth = $auth->otpauth; my $code_0 = $auth->code; my $code_1 = $auth->code( 'utz4tl3bv5o3disb', 1438643789, 30 ); my $verification_0 = $auth->verify('879364'); my $verification_1 = $auth->verify( '879364', # code 1, # range 'utz4tl3bv5o3disb', # secret32 1438643820, # timestamp (defaults to now) 30, # interval (default 30) ); =head1 DESCRIPTION This module provides a simplified interface to supporting typical two-factor authentication (i.e. "2FA") with L using the L as defined by L. Although Google Authenticator supports both TOTP and HOTP, at the moment, this module only supports TOTP. =head1 METHODS The following are the supported methods of this module: =head2 new This is a simple instantiator to which you can pass optional default values. my $auth = Auth::GoogleAuth->new; $auth = Auth::GoogleAuth->new({ secret => 'some secret string thing', issuer => 'Gryphon Shafer', key_id => 'gryphon@cpan.org', }); The object returned will support the following attribute get/set methods: =head3 secret This can be any string. It'll be used as the internal secret key to create the QR codes and authentication codes. =head3 secret32 This is a base-32 encoded copy of the secret string. If this is left undefined and you run one of the methods that require it (like C or C), the method called will try to create the "secret32" by looking for a value in "secret". If none exists, a random "secret32" will be generated. =head3 issuer This is the label name of the "issuer" of the authentication. See the L for more information. =head3 key_id This is the label name of the "key ID" of the authentication. See the L for more information. =head3 otpauth This method returns the otpauth key URI generated when you call C. =head2 generate_secret32 This method will generate a reasonable random "secret32" value, store it in the get/set method, and return it. my $secret32 = $auth->generate_secret32; =head2 clear Given that the "secret" and "secret32" values may persist in this object, which could be a bad idea in some contexts, this C method lets your clear out all attribute values. $auth->clear; =head2 qr_code This method will return a Google Chart API URL that will return a QR code based on the data either in the object or provided to this method. my $url_0 = $auth->qr_code; my $url_1 = $auth->qr_code( 'bv5o3disbutz4tl3', # secret32 'gryphon@cpan.org', # key_id 'Gryphon Shafer', # issuer ); You can optionally add a final true value, and if you do, the method will return the generated otpauth key URI rather than the Google Chart API URL. my $url_2 = $auth->qr_code( 'bv5o3disbutz4tl3', 'gryphon@cpan.org', 'Gryphon Shafer', 1, ); =head2 code This method returns an authentication code, as if you were using L with the "secret32" value. my $code_0 = $auth->code; You can optionally pass override values similar to C: my $code_1 = $auth->code( 'utz4tl3bv5o3disb', # secret32 1438643789, # timestamp (defaults to now) 30, # interval (default 30) ); =head2 verify This method is used for verification of codes entered by a user. Pass in the code (required) and optionally a range value and any override values. my $verification_0 = $auth->verify('879364'); The range value is useful because the algorithm checks codes that are time- based. If clocks are not exactly in sync, it's possible that a "nearly valid" code would be entered and should be accepted as valid but will be seen as invalid. By passing in an integer as a range value, you can stipulate how "fuzzy" the time should be. The default range is 0. A value of 1 will mean that a code based on a time 1 iteration plus or minus should verify. my $verification_1 = $auth->verify( '879364', # code 1, # range 'utz4tl3bv5o3disb', # secret32 1438643820, # timestamp (defaults to now) 30, # interval (default 30) ); =head1 TYPICAL USE-CASE Typically, you're probably going to want to either randomly generate a secret or secret32 (C) for a user and store it, or use a specific value or hash of some value as the secret. In either case, once you have a secret and its stored, generate a QR code (C) for the user. You can alternatively provide the "secret32" to the user for them to manually enter it. That's it for setup. To authenticate, present the user with a way to provide you a code (which will be a series of 6-digits). Verify that code (C) with either no range or some small range like 1. =head1 DEPENDENCIES L, L, L, L, L, L. =head1 SEE ALSO You can look for additional information about this module at: =over 4 =item * L =item * L =item * L =item * L =item * L =item * L =item * L =item * L =back You can look for additional information about things related to this module at: =over 4 =item * L =item * L =item * L =item * L =back =head1 AUTHOR Gryphon Shafer =head1 COPYRIGHT AND LICENSE This software is copyright (c) 2018 by Gryphon Shafer. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself. =cut Auth-GoogleAuth-1.02/LICENSE0000644000175200017520000004366313220542104015345 0ustar gryphongryphonThis software is copyright (c) 2018 by Gryphon Shafer. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself. Terms of the Perl programming language system itself a) the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version, or b) the "Artistic License" --- The GNU General Public License, Version 1, February 1989 --- This software is Copyright (c) 2018 by Gryphon Shafer. This is free software, licensed under: The GNU General Public License, Version 1, February 1989 GNU GENERAL PUBLIC LICENSE Version 1, February 1989 Copyright (C) 1989 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The license agreements of most software companies try to keep users at the mercy of those companies. By contrast, our General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. The General Public License applies to the Free Software Foundation's software and to any other program whose authors commit to using it. You can use it for your programs, too. When we speak of free software, we are referring to freedom, not price. Specifically, the General Public License is designed to make sure that you have the freedom to give away or sell copies of free software, that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of a such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any work containing the Program or a portion of it, either verbatim or with modifications. Each licensee is addressed as "you". 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this General Public License and to the absence of any warranty; and give any other recipients of the Program a copy of this General Public License along with the Program. You may charge a fee for the physical act of transferring a copy. 2. You may modify your copy or copies of the Program or any portion of it, and copy and distribute such modifications under the terms of Paragraph 1 above, provided that you also do the following: a) cause the modified files to carry prominent notices stating that you changed the files and the date of any change; and b) cause the whole of any work that you distribute or publish, that in whole or in part contains the Program or any part thereof, either with or without modifications, to be licensed at no charge to all third parties under the terms of this General Public License (except that you may choose to grant warranty protection to some or all third parties, at your option). c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the simplest and most usual way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this General Public License. d) You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. Mere aggregation of another independent work with the Program (or its derivative) on a volume of a storage or distribution medium does not bring the other work under the scope of these terms. 3. You may copy and distribute the Program (or a portion or derivative of it, under Paragraph 2) in object code or executable form under the terms of Paragraphs 1 and 2 above provided that you also do one of the following: a) accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Paragraphs 1 and 2 above; or, b) accompany it with a written offer, valid for at least three years, to give any third party free (except for a nominal charge for the cost of distribution) a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Paragraphs 1 and 2 above; or, c) accompany it with the information you received as to where the corresponding source code may be obtained. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form alone.) Source code for a work means the preferred form of the work for making modifications to it. For an executable file, complete source code means all the source code for all modules it contains; but, as a special exception, it need not include source code for modules which are standard libraries that accompany the operating system on which the executable file runs, or for standard header files or definitions files that accompany that operating system. 4. You may not copy, modify, sublicense, distribute or transfer the Program except as expressly provided under this General Public License. Any attempt otherwise to copy, modify, sublicense, distribute or transfer the Program is void, and will automatically terminate your rights to use the Program under this License. However, parties who have received copies, or rights to use copies, from you under this General Public License will not have their licenses terminated so long as such parties remain in full compliance. 5. By copying, distributing or modifying the Program (or any work based on the Program) you indicate your acceptance of this license to do so, and all its terms and conditions. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. 7. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of the license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the license, you may choose any version ever published by the Free Software Foundation. 8. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS Appendix: How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to humanity, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) 19yy This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19xx name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (a program to direct compilers to make passes at assemblers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice That's all there is to it! --- The Artistic License 1.0 --- This software is Copyright (c) 2018 by Gryphon Shafer. This is free software, licensed under: The Artistic License 1.0 The Artistic License Preamble The intent of this document is to state the conditions under which a Package may be copied, such that the Copyright Holder maintains some semblance of artistic control over the development of the package, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications. Definitions: - "Package" refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification. - "Standard Version" refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder. - "Copyright Holder" is whoever is named in the copyright or copyrights for the package. - "You" is you, if you're thinking about copying or distributing this Package. - "Reasonable copying fee" is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the Copyright Holder, but only to the computing community at large as a market that must bear the fee.) - "Freely Available" means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the same conditions they received it. 1. You may make and give away verbatim copies of the source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and associated disclaimers. 2. You may apply bug fixes, portability fixes and other modifications derived from the Public Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the Standard Version. 3. You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that you do at least ONE of the following: a) place your modifications in the Public Domain or otherwise make them Freely Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on a major archive site such as ftp.uu.net, or by allowing the Copyright Holder to include your modifications in the Standard Version of the Package. b) use the modified Package only within your corporation or organization. c) rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide a separate manual page for each non-standard executable that clearly documents how it differs from the Standard Version. d) make other distribution arrangements with the Copyright Holder. 4. You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following: a) distribute a Standard Version of the executables and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version. b) accompany the distribution with the machine-readable source of the Package with your modifications. c) accompany any non-standard executables with their corresponding Standard Version executables, giving the non-standard executables non-standard names, and clearly documenting the differences in manual pages (or equivalent), together with instructions on where to get the Standard Version. d) make other distribution arrangements with the Copyright Holder. 5. You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. You may not charge a fee for this Package itself. However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that you do not advertise this Package as a product of your own. 6. The scripts and library files supplied as input to or produced as output from the programs of this Package do not automatically fall under the copyright of this Package, but belong to whomever generated them, and may be sold commercially, and may be aggregated with this Package. 7. C or perl subroutines supplied by you and linked into this Package shall not be considered part of this Package. 8. The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission. 9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. The End Auth-GoogleAuth-1.02/Changes0000644000175200017520000000056113220542104015621 0ustar gryphongryphonRevision history for Auth::GoogleAuth 1.02 2017-12-26 13:50:58-08:00 America/Los_Angeles - Adding Perl versions to test; annual general update for 2018 1.01 2015-08-03 18:04:30-07:00 America/Los_Angeles - Minor POD clean-up 1.00 2015-08-03 17:57:59-07:00 America/Los_Angeles - First version, released on an unsuspecting world. Auth-GoogleAuth-1.02/META.yml0000644000175200017520000000175013220542104015600 0ustar gryphongryphon--- abstract: 'Google Authenticator TBOT Abstraction' author: - 'Gryphon Shafer ' build_requires: File::Spec: '0' IO::Handle: '0' IPC::Open3: '0' Test::More: '0' Test::Most: '0' constant: '0' perl: '5.008' configure_requires: ExtUtils::MakeMaker: '0' perl: '5.008' dynamic_config: 0 generated_by: 'Dist::Zilla version 6.010, CPAN::Meta::Converter version 2.150010' license: perl meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html version: '1.4' name: Auth-GoogleAuth requires: Carp: '0' Class::Accessor: '0' Convert::Base32: '0' Digest::HMAC_SHA1: '0' Math::Random::MT: '0' URI::Escape: '0' base: '0' perl: '5.008' strict: '0' warnings: '0' resources: bugtracker: https://github.com/gryphonshafer/Auth-GoogleAuth/issues homepage: https://github.com/gryphonshafer/Auth-GoogleAuth repository: https://github.com/gryphonshafer/Auth-GoogleAuth.git version: '1.02' x_serialization_backend: 'YAML::Tiny version 1.70' Auth-GoogleAuth-1.02/META.json0000644000175200017520000000417313220542104015752 0ustar gryphongryphon{ "abstract" : "Google Authenticator TBOT Abstraction", "author" : [ "Gryphon Shafer " ], "dynamic_config" : 0, "generated_by" : "Dist::Zilla version 6.010, CPAN::Meta::Converter version 2.150010", "license" : [ "perl_5" ], "meta-spec" : { "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec", "version" : 2 }, "name" : "Auth-GoogleAuth", "prereqs" : { "configure" : { "requires" : { "ExtUtils::MakeMaker" : "0", "perl" : "5.008" } }, "develop" : { "requires" : { "Pod::Coverage::TrustPod" : "0", "Test::EOL" : "0", "Test::Kwalitee" : "1.21", "Test::More" : "0.88", "Test::NoTabs" : "0", "Test::Pod" : "1.41", "Test::Pod::Coverage" : "1.08", "Test::Portability::Files" : "0", "Test::Synopsis" : "0" } }, "runtime" : { "requires" : { "Carp" : "0", "Class::Accessor" : "0", "Convert::Base32" : "0", "Digest::HMAC_SHA1" : "0", "Math::Random::MT" : "0", "URI::Escape" : "0", "base" : "0", "perl" : "5.008", "strict" : "0", "warnings" : "0" } }, "test" : { "requires" : { "File::Spec" : "0", "IO::Handle" : "0", "IPC::Open3" : "0", "Test::More" : "0", "Test::Most" : "0", "constant" : "0", "perl" : "5.008" } } }, "release_status" : "stable", "resources" : { "bugtracker" : { "web" : "https://github.com/gryphonshafer/Auth-GoogleAuth/issues" }, "homepage" : "https://github.com/gryphonshafer/Auth-GoogleAuth", "repository" : { "type" : "git", "url" : "https://github.com/gryphonshafer/Auth-GoogleAuth.git", "web" : "https://github.com/gryphonshafer/Auth-GoogleAuth" } }, "version" : "1.02", "x_serialization_backend" : "Cpanel::JSON::XS version 3.0239" } Auth-GoogleAuth-1.02/README0000644000175200017520000000057213220542104015210 0ustar gryphongryphon This archive contains the distribution Auth-GoogleAuth, version 1.02: Google Authenticator TBOT Abstraction This software is copyright (c) 2018 by Gryphon Shafer. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself. This README file was generated by Dist::Zilla::Plugin::Readme v6.010. Auth-GoogleAuth-1.02/Makefile.PL0000644000175200017520000000313113220542104016274 0ustar gryphongryphon# This file was automatically generated by Dist::Zilla::Plugin::MakeMaker v6.010. use strict; use warnings; use 5.008; use ExtUtils::MakeMaker; my %WriteMakefileArgs = ( "ABSTRACT" => "Google Authenticator TBOT Abstraction", "AUTHOR" => "Gryphon Shafer ", "CONFIGURE_REQUIRES" => { "ExtUtils::MakeMaker" => 0 }, "DISTNAME" => "Auth-GoogleAuth", "LICENSE" => "perl", "MIN_PERL_VERSION" => "5.008", "NAME" => "Auth::GoogleAuth", "PREREQ_PM" => { "Carp" => 0, "Class::Accessor" => 0, "Convert::Base32" => 0, "Digest::HMAC_SHA1" => 0, "Math::Random::MT" => 0, "URI::Escape" => 0, "base" => 0, "strict" => 0, "warnings" => 0 }, "TEST_REQUIRES" => { "File::Spec" => 0, "IO::Handle" => 0, "IPC::Open3" => 0, "Test::More" => 0, "Test::Most" => 0, "constant" => 0 }, "VERSION" => "1.02", "test" => { "TESTS" => "t/*.t" } ); my %FallbackPrereqs = ( "Carp" => 0, "Class::Accessor" => 0, "Convert::Base32" => 0, "Digest::HMAC_SHA1" => 0, "File::Spec" => 0, "IO::Handle" => 0, "IPC::Open3" => 0, "Math::Random::MT" => 0, "Test::More" => 0, "Test::Most" => 0, "URI::Escape" => 0, "base" => 0, "constant" => 0, "strict" => 0, "warnings" => 0 ); unless ( eval { ExtUtils::MakeMaker->VERSION(6.63_03) } ) { delete $WriteMakefileArgs{TEST_REQUIRES}; delete $WriteMakefileArgs{BUILD_REQUIRES}; $WriteMakefileArgs{PREREQ_PM} = \%FallbackPrereqs; } delete $WriteMakefileArgs{CONFIGURE_REQUIRES} unless eval { ExtUtils::MakeMaker->VERSION(6.52) }; WriteMakefile(%WriteMakefileArgs); Auth-GoogleAuth-1.02/t/0000775000175200017520000000000013220542104014571 5ustar gryphongryphonAuth-GoogleAuth-1.02/t/author-no-tabs.t0000644000175200017520000000112013220542104017611 0ustar gryphongryphon BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } use strict; use warnings; # this test was generated with Dist::Zilla::Plugin::Test::NoTabs 0.15 use Test::More 0.88; use Test::NoTabs; my @files = ( 'lib/Auth/GoogleAuth.pm', 't/00-compile.t', 't/author-eol.t', 't/author-no-tabs.t', 't/author-pod-coverage.t', 't/author-pod-syntax.t', 't/author-portability.t', 't/author-synopsis.t', 't/module.t', 't/release-kwalitee.t' ); notabs_ok($_) foreach @files; done_testing; Auth-GoogleAuth-1.02/t/module.t0000644000175200017520000000456213220542104016250 0ustar gryphongryphonuse strict; use warnings; use Test::Most; use constant MODULE => 'Auth::GoogleAuth'; BEGIN { use_ok(MODULE); } require_ok(MODULE); my $obj; ok( $obj = MODULE->new, MODULE . '->new()' ); is( ref $obj, MODULE, 'ref $object' ); my $secret32 = $obj->generate_secret32; ok( $secret32 =~ /^[a-z2-7]{16}$/, 'generate_secret32() length and content' ); is( $secret32, $obj->secret32, 'generate_secret32() stored as secret32()' ); lives_ok( sub { $obj = MODULE->new( { map { $_ => 'data' } qw( secret secret32 issuer key_id ) } ) }, 'new({...})', ); is( $obj->$_, 'data', "$_ set in instantiator" ) for ( qw( secret secret32 issuer key_id ) ); lives_ok( sub { $obj->clear }, 'clear' ); is( $obj->$_, undef, "$_ unset after clear" ) for ( qw( secret secret32 issuer key_id ) ); ok( $obj->qr_code =~ m| https://chart.googleapis.com/chart \? chs=200x200&cht=qr&chl= otpauth%3A%2F%2Ftotp%2FUndefined%3AUndefined%3Fsecret%3D [a-z0-9]{16} %26issuer%3DUndefined |x, 'qr_code from clear state' ); ok( $obj->qr_code( 'bv5o3disbutz4tl3', 'gryphon@cpan.org', 'Gryphon Shafer' ) =~ m| https://chart.googleapis.com/chart \? chs=200x200&cht=qr&chl= otpauth%3A%2F%2Ftotp%2FGryphon%2520Shafer%3Agryphon%2540cpan.org%3Fsecret%3D bv5o3disbutz4tl3 %26issuer%3DGryphon%2520Shafer |x, 'qr_code from specific state' ); ok( $obj->qr_code( 'bv5o3disbutz4tl3', 'gryphon@cpan.org', 'Gryphon Shafer', 1 ) =~ m| otpauth://totp/Gryphon%20Shafer:gryphon%40cpan.org\?secret=bv5o3disbutz4tl3&issuer=Gryphon%20Shafer |x, 'qr_code otpauth from specific state' ); is( $obj->code( undef, 1438643789 ), '007176', 'code()' ); is( $obj->code( 'utz4tl3bv5o3disb', 1438643789 ), '879364', 'code( $s32, $time )' ); is( $obj->code( 'utz4tl3bv5o3disb', 1438643789, 30 ), '879364', 'code( $s32, $time, 30 )' ); is( $obj->code( undef, 1438643789 ), '879364', 'code() again' ); is( $obj->verify( '879364', 0, 'utz4tl3bv5o3disb', 1438643789 ), 1, 'verify(tight) works' ); is( $obj->verify( '879364', 0, 'utz4tl3bv5o3disb', 1438643790 ), 0, 'verify(tight, mis-time) fails' ); is( $obj->verify( '879364', 1, 'utz4tl3bv5o3disb', 1438643790 ), 1, 'verify(loose, mis-time) works' ); is( $obj->verify( '879364', 1, 'utz4tl3bv5o3disb', 1438643820 ), 0, 'verify(loose, mis-time++) fails' ); is( $obj->verify( '879364', 2, 'utz4tl3bv5o3disb', 1438643820 ), 1, 'verify(looser, mis-time++) works' ); done_testing; Auth-GoogleAuth-1.02/t/author-eol.t0000644000175200017520000000115213220542104017032 0ustar gryphongryphon BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } use strict; use warnings; # this test was generated with Dist::Zilla::Plugin::Test::EOL 0.19 use Test::More 0.88; use Test::EOL; my @files = ( 'lib/Auth/GoogleAuth.pm', 't/00-compile.t', 't/author-eol.t', 't/author-no-tabs.t', 't/author-pod-coverage.t', 't/author-pod-syntax.t', 't/author-portability.t', 't/author-synopsis.t', 't/module.t', 't/release-kwalitee.t' ); eol_unix_ok($_, { trailing_whitespace => 1 }) foreach @files; done_testing; Auth-GoogleAuth-1.02/t/author-pod-syntax.t0000644000175200017520000000045413220542104020365 0ustar gryphongryphon#!perl BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } # This file was automatically generated by Dist::Zilla::Plugin::PodSyntaxTests. use strict; use warnings; use Test::More; use Test::Pod 1.41; all_pod_files_ok(); Auth-GoogleAuth-1.02/t/00-compile.t0000644000175200017520000000264013220542104016623 0ustar gryphongryphonuse 5.006; use strict; use warnings; # this test was generated with Dist::Zilla::Plugin::Test::Compile 2.057 use Test::More; plan tests => 1 + ($ENV{AUTHOR_TESTING} ? 1 : 0); my @module_files = ( 'Auth/GoogleAuth.pm' ); # no fake home requested my @switches = ( -d 'blib' ? '-Mblib' : '-Ilib', ); use File::Spec; use IPC::Open3; use IO::Handle; open my $stdin, '<', File::Spec->devnull or die "can't open devnull: $!"; my @warnings; for my $lib (@module_files) { # see L my $stderr = IO::Handle->new; diag('Running: ', join(', ', map { my $str = $_; $str =~ s/'/\\'/g; q{'} . $str . q{'} } $^X, @switches, '-e', "require q[$lib]")) if $ENV{PERL_COMPILE_TEST_DEBUG}; my $pid = open3($stdin, '>&STDERR', $stderr, $^X, @switches, '-e', "require q[$lib]"); binmode $stderr, ':crlf' if $^O eq 'MSWin32'; my @_warnings = <$stderr>; waitpid($pid, 0); is($?, 0, "$lib loaded ok"); shift @_warnings if @_warnings and $_warnings[0] =~ /^Using .*\bblib/ and not eval { +require blib; blib->VERSION('1.01') }; if (@_warnings) { warn @_warnings; push @warnings, @_warnings; } } is(scalar(@warnings), 0, 'no warnings found') or diag 'got warnings: ', ( Test::More->can('explain') ? Test::More::explain(\@warnings) : join("\n", '', @warnings) ) if $ENV{AUTHOR_TESTING}; Auth-GoogleAuth-1.02/t/author-synopsis.t0000644000175200017520000000026213220542104020143 0ustar gryphongryphon#!perl BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } use Test::Synopsis; all_synopsis_ok(); Auth-GoogleAuth-1.02/t/author-portability.t0000644000175200017520000000047113220542104020620 0ustar gryphongryphon BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } use strict; use warnings; use Test::More; eval 'use Test::Portability::Files'; plan skip_all => 'Test::Portability::Files required for testing portability' if $@; run_tests(); Auth-GoogleAuth-1.02/t/release-kwalitee.t0000644000175200017520000000050413220542104020176 0ustar gryphongryphon BEGIN { unless ($ENV{RELEASE_TESTING}) { print qq{1..0 # SKIP these tests are for release candidate testing\n}; exit } } # this test was generated with Dist::Zilla::Plugin::Test::Kwalitee 2.12 use strict; use warnings; use Test::More 0.88; use Test::Kwalitee 1.21 'kwalitee_ok'; kwalitee_ok(); done_testing; Auth-GoogleAuth-1.02/t/author-pod-coverage.t0000644000175200017520000000053613220542104020633 0ustar gryphongryphon#!perl BEGIN { unless ($ENV{AUTHOR_TESTING}) { print qq{1..0 # SKIP these tests are for testing by the author\n}; exit } } # This file was automatically generated by Dist::Zilla::Plugin::PodCoverageTests. use Test::Pod::Coverage 1.08; use Pod::Coverage::TrustPod; all_pod_coverage_ok({ coverage_class => 'Pod::Coverage::TrustPod' });