Email-Address-List-0.07/0000755000076500000240000000000015204136124014347 5ustar sunnavystaffEmail-Address-List-0.07/inc/0000755000076500000240000000000015204136124015120 5ustar sunnavystaffEmail-Address-List-0.07/inc/Module/0000755000076500000240000000000015204136124016345 5ustar sunnavystaffEmail-Address-List-0.07/inc/Module/Install/0000755000076500000240000000000015204136124017753 5ustar sunnavystaffEmail-Address-List-0.07/inc/Module/Install/Fetch.pm0000644000076500000240000000462715156600431021356 0ustar sunnavystaff#line 1 package Module::Install::Fetch; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } sub get_file { my ($self, %args) = @_; my ($scheme, $host, $path, $file) = $args{url} =~ m|^(\w+)://([^/]+)(.+)/(.+)| or return; if ( $scheme eq 'http' and ! eval { require LWP::Simple; 1 } ) { $args{url} = $args{ftp_url} or (warn("LWP support unavailable!\n"), return); ($scheme, $host, $path, $file) = $args{url} =~ m|^(\w+)://([^/]+)(.+)/(.+)| or return; } $|++; print "Fetching '$file' from $host... "; unless (eval { require Socket; Socket::inet_aton($host) }) { warn "'$host' resolve failed!\n"; return; } return unless $scheme eq 'ftp' or $scheme eq 'http'; require Cwd; my $dir = Cwd::getcwd(); chdir $args{local_dir} or return if exists $args{local_dir}; if (eval { require LWP::Simple; 1 }) { LWP::Simple::mirror($args{url}, $file); } elsif (eval { require Net::FTP; 1 }) { eval { # use Net::FTP to get past firewall my $ftp = Net::FTP->new($host, Passive => 1, Timeout => 600); $ftp->login("anonymous", 'anonymous@example.com'); $ftp->cwd($path); $ftp->binary; $ftp->get($file) or (warn("$!\n"), return); $ftp->quit; } } elsif (my $ftp = $self->can_run('ftp')) { eval { # no Net::FTP, fallback to ftp.exe require FileHandle; my $fh = FileHandle->new; local $SIG{CHLD} = 'IGNORE'; unless ($fh->open("|$ftp -n")) { warn "Couldn't open ftp: $!\n"; chdir $dir; return; } my @dialog = split(/\n/, <<"END_FTP"); open $host user anonymous anonymous\@example.com cd $path binary get $file $file quit END_FTP foreach (@dialog) { $fh->print("$_\n") } $fh->close; } } else { warn "No working 'ftp' program available!\n"; chdir $dir; return; } unless (-f $file) { warn "Fetching failed: $@\n"; chdir $dir; return; } return if exists $args{size} and -s $file != $args{size}; system($args{run}) if exists $args{run}; unlink($file) if $args{remove}; print(((!exists $args{check_for} or -e $args{check_for}) ? "done!" : "failed! ($!)"), "\n"); chdir $dir; return !$?; } 1; Email-Address-List-0.07/inc/Module/Install/Metadata.pm0000644000076500000240000004343715156600431022047 0ustar sunnavystaff#line 1 package Module::Install::Metadata; use strict 'vars'; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } my @boolean_keys = qw{ sign }; my @scalar_keys = qw{ name module_name abstract version distribution_type tests installdirs }; my @tuple_keys = qw{ configure_requires build_requires requires recommends bundles resources }; my @resource_keys = qw{ homepage bugtracker repository }; my @array_keys = qw{ keywords author }; *authors = \&author; sub Meta { shift } sub Meta_BooleanKeys { @boolean_keys } sub Meta_ScalarKeys { @scalar_keys } sub Meta_TupleKeys { @tuple_keys } sub Meta_ResourceKeys { @resource_keys } sub Meta_ArrayKeys { @array_keys } foreach my $key ( @boolean_keys ) { *$key = sub { my $self = shift; if ( defined wantarray and not @_ ) { return $self->{values}->{$key}; } $self->{values}->{$key} = ( @_ ? $_[0] : 1 ); return $self; }; } foreach my $key ( @scalar_keys ) { *$key = sub { my $self = shift; return $self->{values}->{$key} if defined wantarray and !@_; $self->{values}->{$key} = shift; return $self; }; } foreach my $key ( @array_keys ) { *$key = sub { my $self = shift; return $self->{values}->{$key} if defined wantarray and !@_; $self->{values}->{$key} ||= []; push @{$self->{values}->{$key}}, @_; return $self; }; } foreach my $key ( @resource_keys ) { *$key = sub { my $self = shift; unless ( @_ ) { return () unless $self->{values}->{resources}; return map { $_->[1] } grep { $_->[0] eq $key } @{ $self->{values}->{resources} }; } return $self->{values}->{resources}->{$key} unless @_; my $uri = shift or die( "Did not provide a value to $key()" ); $self->resources( $key => $uri ); return 1; }; } foreach my $key ( grep { $_ ne "resources" } @tuple_keys) { *$key = sub { my $self = shift; return $self->{values}->{$key} unless @_; my @added; while ( @_ ) { my $module = shift or last; my $version = shift || 0; push @added, [ $module, $version ]; } push @{ $self->{values}->{$key} }, @added; return map {@$_} @added; }; } # Resource handling my %lc_resource = map { $_ => 1 } qw{ homepage license bugtracker repository }; sub resources { my $self = shift; while ( @_ ) { my $name = shift or last; my $value = shift or next; if ( $name eq lc $name and ! $lc_resource{$name} ) { die("Unsupported reserved lowercase resource '$name'"); } $self->{values}->{resources} ||= []; push @{ $self->{values}->{resources} }, [ $name, $value ]; } $self->{values}->{resources}; } # Aliases for build_requires that will have alternative # meanings in some future version of META.yml. sub test_requires { shift->build_requires(@_) } sub install_requires { shift->build_requires(@_) } # Aliases for installdirs options sub install_as_core { $_[0]->installdirs('perl') } sub install_as_cpan { $_[0]->installdirs('site') } sub install_as_site { $_[0]->installdirs('site') } sub install_as_vendor { $_[0]->installdirs('vendor') } sub dynamic_config { my $self = shift; my $value = @_ ? shift : 1; if ( $self->{values}->{dynamic_config} ) { # Once dynamic we never change to static, for safety return 0; } $self->{values}->{dynamic_config} = $value ? 1 : 0; return 1; } # Convenience command sub static_config { shift->dynamic_config(0); } sub perl_version { my $self = shift; return $self->{values}->{perl_version} unless @_; my $version = shift or die( "Did not provide a value to perl_version()" ); # Normalize the version $version = $self->_perl_version($version); # We don't support the really old versions unless ( $version >= 5.005 ) { die "Module::Install only supports 5.005 or newer (use ExtUtils::MakeMaker)\n"; } $self->{values}->{perl_version} = $version; } sub all_from { my ( $self, $file ) = @_; unless ( defined($file) ) { my $name = $self->name or die( "all_from called with no args without setting name() first" ); $file = join('/', 'lib', split(/-/, $name)) . '.pm'; $file =~ s{.*/}{} unless -e $file; unless ( -e $file ) { die("all_from cannot find $file from $name"); } } unless ( -f $file ) { die("The path '$file' does not exist, or is not a file"); } $self->{values}{all_from} = $file; # Some methods pull from POD instead of code. # If there is a matching .pod, use that instead my $pod = $file; $pod =~ s/\.pm$/.pod/i; $pod = $file unless -e $pod; # Pull the different values $self->name_from($file) unless $self->name; $self->version_from($file) unless $self->version; $self->perl_version_from($file) unless $self->perl_version; $self->author_from($pod) unless @{$self->author || []}; $self->license_from($pod) unless $self->license; $self->abstract_from($pod) unless $self->abstract; return 1; } sub provides { my $self = shift; my $provides = ( $self->{values}->{provides} ||= {} ); %$provides = (%$provides, @_) if @_; return $provides; } sub auto_provides { my $self = shift; return $self unless $self->is_admin; unless (-e 'MANIFEST') { warn "Cannot deduce auto_provides without a MANIFEST, skipping\n"; return $self; } # Avoid spurious warnings as we are not checking manifest here. local $SIG{__WARN__} = sub {1}; require ExtUtils::Manifest; local *ExtUtils::Manifest::manicheck = sub { return }; require Module::Build; my $build = Module::Build->new( dist_name => $self->name, dist_version => $self->version, license => $self->license, ); $self->provides( %{ $build->find_dist_packages || {} } ); } sub feature { my $self = shift; my $name = shift; my $features = ( $self->{values}->{features} ||= [] ); my $mods; if ( @_ == 1 and ref( $_[0] ) ) { # The user used ->feature like ->features by passing in the second # argument as a reference. Accomodate for that. $mods = $_[0]; } else { $mods = \@_; } my $count = 0; push @$features, ( $name => [ map { ref($_) ? ( ref($_) eq 'HASH' ) ? %$_ : @$_ : $_ } @$mods ] ); return @$features; } sub features { my $self = shift; while ( my ( $name, $mods ) = splice( @_, 0, 2 ) ) { $self->feature( $name, @$mods ); } return $self->{values}->{features} ? @{ $self->{values}->{features} } : (); } sub no_index { my $self = shift; my $type = shift; push @{ $self->{values}->{no_index}->{$type} }, @_ if $type; return $self->{values}->{no_index}; } sub read { my $self = shift; $self->include_deps( 'YAML::Tiny', 0 ); require YAML::Tiny; my $data = YAML::Tiny::LoadFile('META.yml'); # Call methods explicitly in case user has already set some values. while ( my ( $key, $value ) = each %$data ) { next unless $self->can($key); if ( ref $value eq 'HASH' ) { while ( my ( $module, $version ) = each %$value ) { $self->can($key)->($self, $module => $version ); } } else { $self->can($key)->($self, $value); } } return $self; } sub write { my $self = shift; return $self unless $self->is_admin; $self->admin->write_meta; return $self; } sub version_from { require ExtUtils::MM_Unix; my ( $self, $file ) = @_; $self->version( ExtUtils::MM_Unix->parse_version($file) ); # for version integrity check $self->makemaker_args( VERSION_FROM => $file ); } sub abstract_from { require ExtUtils::MM_Unix; my ( $self, $file ) = @_; $self->abstract( bless( { DISTNAME => $self->name }, 'ExtUtils::MM_Unix' )->parse_abstract($file) ); } # Add both distribution and module name sub name_from { my ($self, $file) = @_; if ( Module::Install::_read($file) =~ m/ ^ \s* package \s* ([\w:]+) [\s|;]* /ixms ) { my ($name, $module_name) = ($1, $1); $name =~ s{::}{-}g; $self->name($name); unless ( $self->module_name ) { $self->module_name($module_name); } } else { die("Cannot determine name from $file\n"); } } sub _extract_perl_version { if ( $_[0] =~ m/ ^\s* (?:use|require) \s* v? ([\d_\.]+) \s* ; /ixms ) { my $perl_version = $1; $perl_version =~ s{_}{}g; return $perl_version; } else { return; } } sub perl_version_from { my $self = shift; my $perl_version=_extract_perl_version(Module::Install::_read($_[0])); if ($perl_version) { $self->perl_version($perl_version); } else { warn "Cannot determine perl version info from $_[0]\n"; return; } } sub author_from { my $self = shift; my $content = Module::Install::_read($_[0]); if ($content =~ m/ =head \d \s+ (?:authors?)\b \s* ([^\n]*) | =head \d \s+ (?:licen[cs]e|licensing|copyright|legal)\b \s* .*? copyright .*? \d\d\d[\d.]+ \s* (?:\bby\b)? \s* ([^\n]*) /ixms) { my $author = $1 || $2; # XXX: ugly but should work anyway... if (eval "require Pod::Escapes; 1") { # Pod::Escapes has a mapping table. # It's in core of perl >= 5.9.3, and should be installed # as one of the Pod::Simple's prereqs, which is a prereq # of Pod::Text 3.x (see also below). $author =~ s{ E<( (\d+) | ([A-Za-z]+) )> } { defined $2 ? chr($2) : defined $Pod::Escapes::Name2character_number{$1} ? chr($Pod::Escapes::Name2character_number{$1}) : do { warn "Unknown escape: E<$1>"; "E<$1>"; }; }gex; } elsif (eval "require Pod::Text; 1" && $Pod::Text::VERSION < 3) { # Pod::Text < 3.0 has yet another mapping table, # though the table name of 2.x and 1.x are different. # (1.x is in core of Perl < 5.6, 2.x is in core of # Perl < 5.9.3) my $mapping = ($Pod::Text::VERSION < 2) ? \%Pod::Text::HTML_Escapes : \%Pod::Text::ESCAPES; $author =~ s{ E<( (\d+) | ([A-Za-z]+) )> } { defined $2 ? chr($2) : defined $mapping->{$1} ? $mapping->{$1} : do { warn "Unknown escape: E<$1>"; "E<$1>"; }; }gex; } else { $author =~ s{E}{<}g; $author =~ s{E}{>}g; } $self->author($author); } else { warn "Cannot determine author info from $_[0]\n"; } } #Stolen from M::B my %license_urls = ( perl => 'http://dev.perl.org/licenses/', apache => 'http://apache.org/licenses/LICENSE-2.0', artistic => 'http://opensource.org/licenses/artistic-license.php', lgpl => 'http://opensource.org/licenses/lgpl-license.php', bsd => 'http://opensource.org/licenses/bsd-license.php', gpl => 'http://opensource.org/licenses/gpl-license.php', gpl2 => 'http://opensource.org/licenses/gpl-2.0.php', gpl3 => 'http://opensource.org/licenses/gpl-3.0.html', mit => 'http://opensource.org/licenses/mit-license.php', mozilla => 'http://opensource.org/licenses/mozilla1.1.php', open_source => undef, unrestricted => undef, restrictive => undef, unknown => undef, # these are not actually allowed in meta-spec v1.4 but are left here for compatibility: apache_1_1 => 'http://apache.org/licenses/LICENSE-1.1', artistic_2 => 'http://opensource.org/licenses/artistic-license-2.0.php', lgpl2 => 'http://opensource.org/licenses/lgpl-2.1.php', lgpl3 => 'http://opensource.org/licenses/lgpl-3.0.html', ); sub license { my $self = shift; return $self->{values}->{license} unless @_; my $license = shift or die( 'Did not provide a value to license()' ); $license = __extract_license($license) || lc $license; $self->{values}->{license} = $license; # Automatically fill in license URLs if ( $license_urls{$license} ) { $self->resources( license => $license_urls{$license} ); } return 1; } sub _extract_license { my $pod = shift; my $matched; return __extract_license( ($matched) = $pod =~ m/ (=head \d \s+ L(?i:ICEN[CS]E|ICENSING)\b.*?) (=head \d.*|=cut.*|)\z /xms ) || __extract_license( ($matched) = $pod =~ m/ (=head \d \s+ (?:C(?i:OPYRIGHTS?)|L(?i:EGAL))\b.*?) (=head \d.*|=cut.*|)\z /xms ); } sub __extract_license { my $license_text = shift or return; my @phrases = ( '(?:under )?the same (?:terms|license) as (?:perl|the perl (?:\d )?programming language)' => 'perl', 1, '(?:under )?the terms of (?:perl|the perl programming language) itself' => 'perl', 1, 'Artistic and GPL' => 'perl', 1, 'GNU general public license' => 'gpl', 1, 'GNU public license' => 'gpl', 1, 'GNU lesser general public license' => 'lgpl', 1, 'GNU lesser public license' => 'lgpl', 1, 'GNU library general public license' => 'lgpl', 1, 'GNU library public license' => 'lgpl', 1, 'GNU Free Documentation license' => 'unrestricted', 1, 'GNU Affero General Public License' => 'open_source', 1, '(?:Free)?BSD license' => 'bsd', 1, 'Artistic license 2\.0' => 'artistic_2', 1, 'Artistic license' => 'artistic', 1, 'Apache (?:Software )?license' => 'apache', 1, 'GPL' => 'gpl', 1, 'LGPL' => 'lgpl', 1, 'BSD' => 'bsd', 1, 'Artistic' => 'artistic', 1, 'MIT' => 'mit', 1, 'Mozilla Public License' => 'mozilla', 1, 'Q Public License' => 'open_source', 1, 'OpenSSL License' => 'unrestricted', 1, 'SSLeay License' => 'unrestricted', 1, 'zlib License' => 'open_source', 1, 'proprietary' => 'proprietary', 0, ); while ( my ($pattern, $license, $osi) = splice(@phrases, 0, 3) ) { $pattern =~ s#\s+#\\s+#gs; if ( $license_text =~ /\b$pattern\b/i ) { return $license; } } return ''; } sub license_from { my $self = shift; if (my $license=_extract_license(Module::Install::_read($_[0]))) { $self->license($license); } else { warn "Cannot determine license info from $_[0]\n"; return 'unknown'; } } sub _extract_bugtracker { my @links = $_[0] =~ m#L<( https?\Q://rt.cpan.org/\E[^>]+| https?\Q://github.com/\E[\w_]+/[\w_]+/issues| https?\Q://code.google.com/p/\E[\w_\-]+/issues/list )>#gx; my %links; @links{@links}=(); @links=keys %links; return @links; } sub bugtracker_from { my $self = shift; my $content = Module::Install::_read($_[0]); my @links = _extract_bugtracker($content); unless ( @links ) { warn "Cannot determine bugtracker info from $_[0]\n"; return 0; } if ( @links > 1 ) { warn "Found more than one bugtracker link in $_[0]\n"; return 0; } # Set the bugtracker bugtracker( $links[0] ); return 1; } sub requires_from { my $self = shift; my $content = Module::Install::_readperl($_[0]); my @requires = $content =~ m/^use\s+([^\W\d]\w*(?:::\w+)*)\s+(v?[\d\.]+)/mg; while ( @requires ) { my $module = shift @requires; my $version = shift @requires; $self->requires( $module => $version ); } } sub test_requires_from { my $self = shift; my $content = Module::Install::_readperl($_[0]); my @requires = $content =~ m/^use\s+([^\W\d]\w*(?:::\w+)*)\s+([\d\.]+)/mg; while ( @requires ) { my $module = shift @requires; my $version = shift @requires; $self->test_requires( $module => $version ); } } # Convert triple-part versions (eg, 5.6.1 or 5.8.9) to # numbers (eg, 5.006001 or 5.008009). # Also, convert double-part versions (eg, 5.8) sub _perl_version { my $v = $_[-1]; $v =~ s/^([1-9])\.([1-9]\d?\d?)$/sprintf("%d.%03d",$1,$2)/e; $v =~ s/^([1-9])\.([1-9]\d?\d?)\.(0|[1-9]\d?\d?)$/sprintf("%d.%03d%03d",$1,$2,$3 || 0)/e; $v =~ s/(\.\d\d\d)000$/$1/; $v =~ s/_.+$//; if ( ref($v) ) { # Numify $v = $v + 0; } return $v; } sub add_metadata { my $self = shift; my %hash = @_; for my $key (keys %hash) { warn "add_metadata: $key is not prefixed with 'x_'.\n" . "Use appopriate function to add non-private metadata.\n" unless $key =~ /^x_/; $self->{values}->{$key} = $hash{$key}; } } ###################################################################### # MYMETA Support sub WriteMyMeta { die "WriteMyMeta has been deprecated"; } sub write_mymeta_yaml { my $self = shift; # We need YAML::Tiny to write the MYMETA.yml file unless ( eval { require YAML::Tiny; 1; } ) { return 1; } # Generate the data my $meta = $self->_write_mymeta_data or return 1; # Save as the MYMETA.yml file print "Writing MYMETA.yml\n"; YAML::Tiny::DumpFile('MYMETA.yml', $meta); } sub write_mymeta_json { my $self = shift; # We need JSON to write the MYMETA.json file unless ( eval { require JSON; 1; } ) { return 1; } # Generate the data my $meta = $self->_write_mymeta_data or return 1; # Save as the MYMETA.yml file print "Writing MYMETA.json\n"; Module::Install::_write( 'MYMETA.json', JSON->new->pretty(1)->canonical->encode($meta), ); } sub _write_mymeta_data { my $self = shift; # If there's no existing META.yml there is nothing we can do return undef unless -f 'META.yml'; # We need Parse::CPAN::Meta to load the file unless ( eval { require Parse::CPAN::Meta; 1; } ) { return undef; } # Merge the perl version into the dependencies my $val = $self->Meta->{values}; my $perl = delete $val->{perl_version}; if ( $perl ) { $val->{requires} ||= []; my $requires = $val->{requires}; # Canonize to three-dot version after Perl 5.6 if ( $perl >= 5.006 ) { $perl =~ s{^(\d+)\.(\d\d\d)(\d*)}{join('.', $1, int($2||0), int($3||0))}e } unshift @$requires, [ perl => $perl ]; } # Load the advisory META.yml file my @yaml = Parse::CPAN::Meta::LoadFile('META.yml'); my $meta = $yaml[0]; # Overwrite the non-configure dependency hashes delete $meta->{requires}; delete $meta->{build_requires}; delete $meta->{recommends}; if ( exists $val->{requires} ) { $meta->{requires} = { map { @$_ } @{ $val->{requires} } }; } if ( exists $val->{build_requires} ) { $meta->{build_requires} = { map { @$_ } @{ $val->{build_requires} } }; } return $meta; } 1; Email-Address-List-0.07/inc/Module/Install/Win32.pm0000644000076500000240000000340315156600431021216 0ustar sunnavystaff#line 1 package Module::Install::Win32; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } # determine if the user needs nmake, and download it if needed sub check_nmake { my $self = shift; $self->load('can_run'); $self->load('get_file'); require Config; return unless ( $^O eq 'MSWin32' and $Config::Config{make} and $Config::Config{make} =~ /^nmake\b/i and ! $self->can_run('nmake') ); print "The required 'nmake' executable not found, fetching it...\n"; require File::Basename; my $rv = $self->get_file( url => 'http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/Nmake15.exe', ftp_url => 'ftp://ftp.microsoft.com/Softlib/MSLFILES/Nmake15.exe', local_dir => File::Basename::dirname($^X), size => 51928, run => 'Nmake15.exe /o > nul', check_for => 'Nmake.exe', remove => 1, ); die <<'END_MESSAGE' unless $rv; ------------------------------------------------------------------------------- Since you are using Microsoft Windows, you will need the 'nmake' utility before installation. It's available at: http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/Nmake15.exe or ftp://ftp.microsoft.com/Softlib/MSLFILES/Nmake15.exe Please download the file manually, save it to a directory in %PATH% (e.g. C:\WINDOWS\COMMAND\), then launch the MS-DOS command line shell, "cd" to that directory, and run "Nmake15.exe" from there; that will create the 'nmake.exe' file needed by this module. You may then resume the installation process described in README. ------------------------------------------------------------------------------- END_MESSAGE } 1; Email-Address-List-0.07/inc/Module/Install/ReadmeFromPod.pm0000644000076500000240000001016414777360437023023 0ustar sunnavystaff#line 1 package Module::Install::ReadmeFromPod; use 5.006; use strict; use warnings; use base qw(Module::Install::Base); use vars qw($VERSION); $VERSION = '0.30'; { # these aren't defined until after _require_admin is run, so # define them so prototypes are available during compilation. sub io; sub capture(&;@); #line 28 my $done = 0; sub _require_admin { # do this once to avoid redefinition warnings from IO::All return if $done; require IO::All; IO::All->import( '-binary' ); require Capture::Tiny; Capture::Tiny->import ( 'capture' ); return; } } sub readme_from { my $self = shift; return unless $self->is_admin; _require_admin; # Input file my $in_file = shift || $self->_all_from or die "Can't determine file to make readme_from"; # Get optional arguments my ($clean, $format, $out_file, $options); my $args = shift; if ( ref $args ) { # Arguments are in a hashref if ( ref($args) ne 'HASH' ) { die "Expected a hashref but got a ".ref($args)."\n"; } else { $clean = $args->{'clean'}; $format = $args->{'format'}; $out_file = $args->{'output_file'}; $options = $args->{'options'}; } } else { # Arguments are in a list $clean = $args; $format = shift; $out_file = shift; $options = \@_; } # Default values; $clean ||= 0; $format ||= 'txt'; # Generate README print "readme_from $in_file to $format\n"; if ($format =~ m/te?xt/) { $out_file = $self->_readme_txt($in_file, $out_file, $options); } elsif ($format =~ m/html?/) { $out_file = $self->_readme_htm($in_file, $out_file, $options); } elsif ($format eq 'man') { $out_file = $self->_readme_man($in_file, $out_file, $options); } elsif ($format eq 'md') { $out_file = $self->_readme_md($in_file, $out_file, $options); } elsif ($format eq 'pdf') { $out_file = $self->_readme_pdf($in_file, $out_file, $options); } if ($clean) { $self->clean_files($out_file); } return 1; } sub _readme_txt { my ($self, $in_file, $out_file, $options) = @_; $out_file ||= 'README'; require Pod::Text; my $parser = Pod::Text->new( @$options ); my $io = io->file($out_file)->open(">"); my $out_fh = $io->io_handle; $parser->output_fh( *$out_fh ); $parser->parse_file( $in_file ); return $out_file; } sub _readme_htm { my ($self, $in_file, $out_file, $options) = @_; $out_file ||= 'README.htm'; require Pod::Html; my ($o) = capture { Pod::Html::pod2html( "--infile=$in_file", "--outfile=-", @$options, ); }; io->file($out_file)->print($o); # Remove temporary files if needed for my $file ('pod2htmd.tmp', 'pod2htmi.tmp') { if (-e $file) { unlink $file or warn "Warning: Could not remove file '$file'.\n$!\n"; } } return $out_file; } sub _readme_man { my ($self, $in_file, $out_file, $options) = @_; $out_file ||= 'README.1'; require Pod::Man; my $parser = Pod::Man->new( @$options ); my $io = io->file($out_file)->open(">"); my $out_fh = $io->io_handle; $parser->output_fh( *$out_fh ); $parser->parse_file( $in_file ); return $out_file; } sub _readme_pdf { my ($self, $in_file, $out_file, $options) = @_; $out_file ||= 'README.pdf'; eval { require App::pod2pdf; } or die "Could not generate $out_file because pod2pdf could not be found\n"; my $parser = App::pod2pdf->new( @$options ); $parser->parse_from_file($in_file); my ($o) = capture { $parser->output }; io->file($out_file)->print($o); return $out_file; } sub _readme_md { my ($self, $in_file, $out_file, $options) = @_; $out_file ||= 'README.md'; require Pod::Markdown; my $parser = Pod::Markdown->new( @$options ); my $io = io->file($out_file)->open(">"); my $out_fh = $io->io_handle; $parser->output_fh( *$out_fh ); $parser->parse_file( $in_file ); return $out_file; } sub _all_from { my $self = shift; return unless $self->admin->{extensions}; my ($metadata) = grep { ref($_) eq 'Module::Install::Metadata'; } @{$self->admin->{extensions}}; return unless $metadata; return $metadata->{values}{all_from} || ''; } 'Readme!'; __END__ #line 316 Email-Address-List-0.07/inc/Module/Install/WriteAll.pm0000644000076500000240000000237615156600431022047 0ustar sunnavystaff#line 1 package Module::Install::WriteAll; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = qw{Module::Install::Base}; $ISCORE = 1; } sub WriteAll { my $self = shift; my %args = ( meta => 1, sign => 0, inline => 0, check_nmake => 1, @_, ); $self->sign(1) if $args{sign}; $self->admin->WriteAll(%args) if $self->is_admin; $self->check_nmake if $args{check_nmake}; unless ( $self->makemaker_args->{PL_FILES} ) { # XXX: This still may be a bit over-defensive... unless ($self->makemaker(6.25)) { $self->makemaker_args( PL_FILES => {} ) if -f 'Build.PL'; } } # Until ExtUtils::MakeMaker support MYMETA.yml, make sure # we clean it up properly ourself. $self->realclean_files('MYMETA.yml'); if ( $args{inline} ) { $self->Inline->write; } else { $self->Makefile->write; } # The Makefile write process adds a couple of dependencies, # so write the META.yml files after the Makefile. if ( $args{meta} ) { $self->Meta->write; } # Experimental support for MYMETA if ( $ENV{X_MYMETA} ) { if ( $ENV{X_MYMETA} eq 'JSON' ) { $self->Meta->write_mymeta_json; } else { $self->Meta->write_mymeta_yaml; } } return 1; } 1; Email-Address-List-0.07/inc/Module/Install/Can.pm0000644000076500000240000000640515156600431021022 0ustar sunnavystaff#line 1 package Module::Install::Can; use strict; use Config (); use ExtUtils::MakeMaker (); use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } # check if we can load some module ### Upgrade this to not have to load the module if possible sub can_use { my ($self, $mod, $ver) = @_; $mod =~ s{::|\\}{/}g; $mod .= '.pm' unless $mod =~ /\.pm$/i; my $pkg = $mod; $pkg =~ s{/}{::}g; $pkg =~ s{\.pm$}{}i; local $@; eval { require $mod; $pkg->VERSION($ver || 0); 1 }; } # Check if we can run some command sub can_run { my ($self, $cmd) = @_; my $_cmd = $cmd; return $_cmd if (-x $_cmd or $_cmd = MM->maybe_command($_cmd)); for my $dir ((split /$Config::Config{path_sep}/, $ENV{PATH}), '.') { next if $dir eq ''; require File::Spec; my $abs = File::Spec->catfile($dir, $cmd); return $abs if (-x $abs or $abs = MM->maybe_command($abs)); } return; } # Can our C compiler environment build XS files sub can_xs { my $self = shift; # Ensure we have the CBuilder module $self->configure_requires( 'ExtUtils::CBuilder' => 0.27 ); # Do we have the configure_requires checker? local $@; eval "require ExtUtils::CBuilder;"; if ( $@ ) { # They don't obey configure_requires, so it is # someone old and delicate. Try to avoid hurting # them by falling back to an older simpler test. return $self->can_cc(); } # Do we have a working C compiler my $builder = ExtUtils::CBuilder->new( quiet => 1, ); unless ( $builder->have_compiler ) { # No working C compiler return 0; } # Write a C file representative of what XS becomes require File::Temp; my ( $FH, $tmpfile ) = File::Temp::tempfile( "compilexs-XXXXX", SUFFIX => '.c', ); binmode $FH; print $FH <<'END_C'; #include "EXTERN.h" #include "perl.h" #include "XSUB.h" int main(int argc, char **argv) { return 0; } int boot_sanexs() { return 1; } END_C close $FH; # Can the C compiler access the same headers XS does my @libs = (); my $object = undef; eval { local $^W = 0; $object = $builder->compile( source => $tmpfile, ); @libs = $builder->link( objects => $object, module_name => 'sanexs', ); }; my $result = $@ ? 0 : 1; # Clean up all the build files foreach ( $tmpfile, $object, @libs ) { next unless defined $_; 1 while unlink; } return $result; } # Can we locate a (the) C compiler sub can_cc { my $self = shift; if ($^O eq 'VMS') { require ExtUtils::CBuilder; my $builder = ExtUtils::CBuilder->new( quiet => 1, ); return $builder->have_compiler; } my @chunks = split(/ /, $Config::Config{cc}) or return; # $Config{cc} may contain args; try to find out the program part while (@chunks) { return $self->can_run("@chunks") || (pop(@chunks), next); } return; } # Fix Cygwin bug on maybe_command(); if ( $^O eq 'cygwin' ) { require ExtUtils::MM_Cygwin; require ExtUtils::MM_Win32; if ( ! defined(&ExtUtils::MM_Cygwin::maybe_command) ) { *ExtUtils::MM_Cygwin::maybe_command = sub { my ($self, $file) = @_; if ($file =~ m{^/cygdrive/}i and ExtUtils::MM_Win32->can('maybe_command')) { ExtUtils::MM_Win32->maybe_command($file); } else { ExtUtils::MM_Unix->maybe_command($file); } } } } 1; __END__ #line 245 Email-Address-List-0.07/inc/Module/Install/Makefile.pm0000644000076500000240000002743715156600431022046 0ustar sunnavystaff#line 1 package Module::Install::Makefile; use strict 'vars'; use ExtUtils::MakeMaker (); use Module::Install::Base (); use Fcntl qw/:flock :seek/; use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.21'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } sub Makefile { $_[0] } my %seen = (); sub prompt { shift; # Infinite loop protection my @c = caller(); if ( ++$seen{"$c[1]|$c[2]|$_[0]"} > 3 ) { die "Caught an potential prompt infinite loop ($c[1]|$c[2]|$_[0])"; } # In automated testing or non-interactive session, always use defaults if ( ($ENV{AUTOMATED_TESTING} or -! -t STDIN) and ! $ENV{PERL_MM_USE_DEFAULT} ) { local $ENV{PERL_MM_USE_DEFAULT} = 1; goto &ExtUtils::MakeMaker::prompt; } else { goto &ExtUtils::MakeMaker::prompt; } } # Store a cleaned up version of the MakeMaker version, # since we need to behave differently in a variety of # ways based on the MM version. my $makemaker = eval $ExtUtils::MakeMaker::VERSION; # If we are passed a param, do a "newer than" comparison. # Otherwise, just return the MakeMaker version. sub makemaker { ( @_ < 2 or $makemaker >= eval($_[1]) ) ? $makemaker : 0 } # Ripped from ExtUtils::MakeMaker 6.56, and slightly modified # as we only need to know here whether the attribute is an array # or a hash or something else (which may or may not be appendable). my %makemaker_argtype = ( C => 'ARRAY', CONFIG => 'ARRAY', # CONFIGURE => 'CODE', # ignore DIR => 'ARRAY', DL_FUNCS => 'HASH', DL_VARS => 'ARRAY', EXCLUDE_EXT => 'ARRAY', EXE_FILES => 'ARRAY', FUNCLIST => 'ARRAY', H => 'ARRAY', IMPORTS => 'HASH', INCLUDE_EXT => 'ARRAY', LIBS => 'ARRAY', # ignore '' MAN1PODS => 'HASH', MAN3PODS => 'HASH', META_ADD => 'HASH', META_MERGE => 'HASH', PL_FILES => 'HASH', PM => 'HASH', PMLIBDIRS => 'ARRAY', PMLIBPARENTDIRS => 'ARRAY', PREREQ_PM => 'HASH', CONFIGURE_REQUIRES => 'HASH', SKIP => 'ARRAY', TYPEMAPS => 'ARRAY', XS => 'HASH', # VERSION => ['version',''], # ignore # _KEEP_AFTER_FLUSH => '', clean => 'HASH', depend => 'HASH', dist => 'HASH', dynamic_lib=> 'HASH', linkext => 'HASH', macro => 'HASH', postamble => 'HASH', realclean => 'HASH', test => 'HASH', tool_autosplit => 'HASH', # special cases where you can use makemaker_append CCFLAGS => 'APPENDABLE', DEFINE => 'APPENDABLE', INC => 'APPENDABLE', LDDLFLAGS => 'APPENDABLE', LDFROM => 'APPENDABLE', ); sub makemaker_args { my ($self, %new_args) = @_; my $args = ( $self->{makemaker_args} ||= {} ); foreach my $key (keys %new_args) { if ($makemaker_argtype{$key}) { if ($makemaker_argtype{$key} eq 'ARRAY') { $args->{$key} = [] unless defined $args->{$key}; unless (ref $args->{$key} eq 'ARRAY') { $args->{$key} = [$args->{$key}] } push @{$args->{$key}}, ref $new_args{$key} eq 'ARRAY' ? @{$new_args{$key}} : $new_args{$key}; } elsif ($makemaker_argtype{$key} eq 'HASH') { $args->{$key} = {} unless defined $args->{$key}; foreach my $skey (keys %{ $new_args{$key} }) { $args->{$key}{$skey} = $new_args{$key}{$skey}; } } elsif ($makemaker_argtype{$key} eq 'APPENDABLE') { $self->makemaker_append($key => $new_args{$key}); } } else { if (defined $args->{$key}) { warn qq{MakeMaker attribute "$key" is overriden; use "makemaker_append" to append values\n}; } $args->{$key} = $new_args{$key}; } } return $args; } # For mm args that take multiple space-separated args, # append an argument to the current list. sub makemaker_append { my $self = shift; my $name = shift; my $args = $self->makemaker_args; $args->{$name} = defined $args->{$name} ? join( ' ', $args->{$name}, @_ ) : join( ' ', @_ ); } sub build_subdirs { my $self = shift; my $subdirs = $self->makemaker_args->{DIR} ||= []; for my $subdir (@_) { push @$subdirs, $subdir; } } sub clean_files { my $self = shift; my $clean = $self->makemaker_args->{clean} ||= {}; %$clean = ( %$clean, FILES => join ' ', grep { length $_ } ($clean->{FILES} || (), @_), ); } sub realclean_files { my $self = shift; my $realclean = $self->makemaker_args->{realclean} ||= {}; %$realclean = ( %$realclean, FILES => join ' ', grep { length $_ } ($realclean->{FILES} || (), @_), ); } sub libs { my $self = shift; my $libs = ref $_[0] ? shift : [ shift ]; $self->makemaker_args( LIBS => $libs ); } sub inc { my $self = shift; $self->makemaker_args( INC => shift ); } sub _wanted_t { } sub tests_recursive { my $self = shift; my $dir = shift || 't'; unless ( -d $dir ) { die "tests_recursive dir '$dir' does not exist"; } my %tests = map { $_ => 1 } split / /, ($self->tests || ''); require File::Find; File::Find::find( sub { /\.t$/ and -f $_ and $tests{"$File::Find::dir/*.t"} = 1 }, $dir ); $self->tests( join ' ', sort keys %tests ); } sub write { my $self = shift; die "&Makefile->write() takes no arguments\n" if @_; # Check the current Perl version my $perl_version = $self->perl_version; if ( $perl_version ) { eval "use $perl_version; 1" or die "ERROR: perl: Version $] is installed, " . "but we need version >= $perl_version"; } # Make sure we have a new enough MakeMaker require ExtUtils::MakeMaker; if ( $perl_version and $self->_cmp($perl_version, '5.006') >= 0 ) { # This previous attempted to inherit the version of # ExtUtils::MakeMaker in use by the module author, but this # was found to be untenable as some authors build releases # using future dev versions of EU:MM that nobody else has. # Instead, #toolchain suggests we use 6.59 which is the most # stable version on CPAN at time of writing and is, to quote # ribasushi, "not terminally fucked, > and tested enough". # TODO: We will now need to maintain this over time to push # the version up as new versions are released. $self->build_requires( 'ExtUtils::MakeMaker' => 6.59 ); $self->configure_requires( 'ExtUtils::MakeMaker' => 6.59 ); } else { # Allow legacy-compatibility with 5.005 by depending on the # most recent EU:MM that supported 5.005. $self->build_requires( 'ExtUtils::MakeMaker' => 6.36 ); $self->configure_requires( 'ExtUtils::MakeMaker' => 6.36 ); } # Generate the MakeMaker params my $args = $self->makemaker_args; $args->{DISTNAME} = $self->name; $args->{NAME} = $self->module_name || $self->name; $args->{NAME} =~ s/-/::/g; $args->{VERSION} = $self->version or die <<'EOT'; ERROR: Can't determine distribution version. Please specify it explicitly via 'version' in Makefile.PL, or set a valid $VERSION in a module, and provide its file path via 'version_from' (or 'all_from' if you prefer) in Makefile.PL. EOT if ( $self->tests ) { my @tests = split ' ', $self->tests; my %seen; $args->{test} = { TESTS => (join ' ', grep {!$seen{$_}++} @tests), }; } elsif ( $Module::Install::ExtraTests::use_extratests ) { # Module::Install::ExtraTests doesn't set $self->tests and does its own tests via harness. # So, just ignore our xt tests here. } elsif ( -d 'xt' and ($Module::Install::AUTHOR or $ENV{RELEASE_TESTING}) ) { $args->{test} = { TESTS => join( ' ', map { "$_/*.t" } grep { -d $_ } qw{ t xt } ), }; } if ( $] >= 5.005 ) { $args->{ABSTRACT} = $self->abstract; $args->{AUTHOR} = join ', ', @{$self->author || []}; } if ( $self->makemaker(6.10) ) { $args->{NO_META} = 1; #$args->{NO_MYMETA} = 1; } if ( $self->makemaker(6.17) and $self->sign ) { $args->{SIGN} = 1; } unless ( $self->is_admin ) { delete $args->{SIGN}; } if ( $self->makemaker(6.31) and $self->license ) { $args->{LICENSE} = $self->license; } my $prereq = ($args->{PREREQ_PM} ||= {}); %$prereq = ( %$prereq, map { @$_ } # flatten [module => version] map { @$_ } grep $_, ($self->requires) ); # Remove any reference to perl, PREREQ_PM doesn't support it delete $args->{PREREQ_PM}->{perl}; # Merge both kinds of requires into BUILD_REQUIRES my $build_prereq = ($args->{BUILD_REQUIRES} ||= {}); %$build_prereq = ( %$build_prereq, map { @$_ } # flatten [module => version] map { @$_ } grep $_, ($self->configure_requires, $self->build_requires) ); # Remove any reference to perl, BUILD_REQUIRES doesn't support it delete $args->{BUILD_REQUIRES}->{perl}; # Delete bundled dists from prereq_pm, add it to Makefile DIR my $subdirs = ($args->{DIR} || []); if ($self->bundles) { my %processed; foreach my $bundle (@{ $self->bundles }) { my ($mod_name, $dist_dir) = @$bundle; delete $prereq->{$mod_name}; $dist_dir = File::Basename::basename($dist_dir); # dir for building this module if (not exists $processed{$dist_dir}) { if (-d $dist_dir) { # List as sub-directory to be processed by make push @$subdirs, $dist_dir; } # Else do nothing: the module is already present on the system $processed{$dist_dir} = undef; } } } unless ( $self->makemaker('6.55_03') ) { %$prereq = (%$prereq,%$build_prereq); delete $args->{BUILD_REQUIRES}; } if ( my $perl_version = $self->perl_version ) { eval "use $perl_version; 1" or die "ERROR: perl: Version $] is installed, " . "but we need version >= $perl_version"; if ( $self->makemaker(6.48) ) { $args->{MIN_PERL_VERSION} = $perl_version; } } if ($self->installdirs) { warn qq{old INSTALLDIRS (probably set by makemaker_args) is overriden by installdirs\n} if $args->{INSTALLDIRS}; $args->{INSTALLDIRS} = $self->installdirs; } my %args = map { ( $_ => $args->{$_} ) } grep {defined($args->{$_} ) } keys %$args; my $user_preop = delete $args{dist}->{PREOP}; if ( my $preop = $self->admin->preop($user_preop) ) { foreach my $key ( keys %$preop ) { $args{dist}->{$key} = $preop->{$key}; } } my $mm = ExtUtils::MakeMaker::WriteMakefile(%args); $self->fix_up_makefile($mm->{FIRST_MAKEFILE} || 'Makefile'); } sub fix_up_makefile { my $self = shift; my $makefile_name = shift; my $top_class = ref($self->_top) || ''; my $top_version = $self->_top->VERSION || ''; my $preamble = $self->preamble ? "# Preamble by $top_class $top_version\n" . $self->preamble : ''; my $postamble = "# Postamble by $top_class $top_version\n" . ($self->postamble || ''); local *MAKEFILE; open MAKEFILE, "+< $makefile_name" or die "fix_up_makefile: Couldn't open $makefile_name: $!"; eval { flock MAKEFILE, LOCK_EX }; my $makefile = do { local $/; }; $makefile =~ s/\b(test_harness\(\$\(TEST_VERBOSE\), )/$1'inc', /; $makefile =~ s/( -I\$\(INST_ARCHLIB\))/ -Iinc$1/g; $makefile =~ s/( "-I\$\(INST_LIB\)")/ "-Iinc"$1/g; $makefile =~ s/^(FULLPERL = .*)/$1 "-Iinc"/m; $makefile =~ s/^(PERL = .*)/$1 "-Iinc"/m; # Module::Install will never be used to build the Core Perl # Sometimes PERL_LIB and PERL_ARCHLIB get written anyway, which breaks # PREFIX/PERL5LIB, and thus, install_share. Blank them if they exist $makefile =~ s/^PERL_LIB = .+/PERL_LIB =/m; #$makefile =~ s/^PERL_ARCHLIB = .+/PERL_ARCHLIB =/m; # Perl 5.005 mentions PERL_LIB explicitly, so we have to remove that as well. $makefile =~ s/(\"?)-I\$\(PERL_LIB\)\1//g; # XXX - This is currently unused; not sure if it breaks other MM-users # $makefile =~ s/^pm_to_blib\s+:\s+/pm_to_blib :: /mg; seek MAKEFILE, 0, SEEK_SET; truncate MAKEFILE, 0; print MAKEFILE "$preamble$makefile$postamble" or die $!; close MAKEFILE or die $!; 1; } sub preamble { my ($self, $text) = @_; $self->{preamble} = $text . $self->{preamble} if defined $text; $self->{preamble}; } sub postamble { my ($self, $text) = @_; $self->{postamble} ||= $self->admin->postamble; $self->{postamble} .= $text if defined $text; $self->{postamble} } 1; __END__ #line 544 Email-Address-List-0.07/inc/Module/Install/Base.pm0000644000076500000240000000214715156600431021172 0ustar sunnavystaff#line 1 package Module::Install::Base; use strict 'vars'; use vars qw{$VERSION}; BEGIN { $VERSION = '1.21'; } # Suspend handler for "redefined" warnings BEGIN { my $w = $SIG{__WARN__}; $SIG{__WARN__} = sub { $w }; } #line 42 sub new { my $class = shift; unless ( defined &{"${class}::call"} ) { *{"${class}::call"} = sub { shift->_top->call(@_) }; } unless ( defined &{"${class}::load"} ) { *{"${class}::load"} = sub { shift->_top->load(@_) }; } bless { @_ }, $class; } #line 61 sub AUTOLOAD { local $@; my $func = eval { shift->_top->autoload } or return; goto &$func; } #line 75 sub _top { $_[0]->{_top}; } #line 90 sub admin { $_[0]->_top->{admin} or Module::Install::Base::FakeAdmin->new; } #line 106 sub is_admin { ! $_[0]->admin->isa('Module::Install::Base::FakeAdmin'); } sub DESTROY {} package Module::Install::Base::FakeAdmin; use vars qw{$VERSION}; BEGIN { $VERSION = $Module::Install::Base::VERSION; } my $fake; sub new { $fake ||= bless(\@_, $_[0]); } sub AUTOLOAD {} sub DESTROY {} # Restore warning handler BEGIN { $SIG{__WARN__} = $SIG{__WARN__}->(); } 1; #line 159 Email-Address-List-0.07/inc/Module/Install.pm0000644000076500000240000002714515156600431020325 0ustar sunnavystaff#line 1 package Module::Install; # For any maintainers: # The load order for Module::Install is a bit magic. # It goes something like this... # # IF ( host has Module::Install installed, creating author mode ) { # 1. Makefile.PL calls "use inc::Module::Install" # 2. $INC{inc/Module/Install.pm} set to installed version of inc::Module::Install # 3. The installed version of inc::Module::Install loads # 4. inc::Module::Install calls "require Module::Install" # 5. The ./inc/ version of Module::Install loads # } ELSE { # 1. Makefile.PL calls "use inc::Module::Install" # 2. $INC{inc/Module/Install.pm} set to ./inc/ version of Module::Install # 3. The ./inc/ version of Module::Install loads # } use 5.006; use strict 'vars'; use Cwd (); use File::Find (); use File::Path (); use vars qw{$VERSION $MAIN}; BEGIN { # All Module::Install core packages now require synchronised versions. # This will be used to ensure we don't accidentally load old or # different versions of modules. # This is not enforced yet, but will be some time in the next few # releases once we can make sure it won't clash with custom # Module::Install extensions. $VERSION = '1.21'; # Storage for the pseudo-singleton $MAIN = undef; *inc::Module::Install::VERSION = *VERSION; @inc::Module::Install::ISA = __PACKAGE__; } sub import { my $class = shift; my $self = $class->new(@_); my $who = $self->_caller; #------------------------------------------------------------- # all of the following checks should be included in import(), # to allow "eval 'require Module::Install; 1' to test # installation of Module::Install. (RT #51267) #------------------------------------------------------------- # Whether or not inc::Module::Install is actually loaded, the # $INC{inc/Module/Install.pm} is what will still get set as long as # the caller loaded module this in the documented manner. # If not set, the caller may NOT have loaded the bundled version, and thus # they may not have a MI version that works with the Makefile.PL. This would # result in false errors or unexpected behaviour. And we don't want that. my $file = join( '/', 'inc', split /::/, __PACKAGE__ ) . '.pm'; unless ( $INC{$file} ) { die <<"END_DIE" } Please invoke ${\__PACKAGE__} with: use inc::${\__PACKAGE__}; not: use ${\__PACKAGE__}; END_DIE # This reportedly fixes a rare Win32 UTC file time issue, but # as this is a non-cross-platform XS module not in the core, # we shouldn't really depend on it. See RT #24194 for detail. # (Also, this module only supports Perl 5.6 and above). eval "use Win32::UTCFileTime" if $^O eq 'MSWin32' && $] >= 5.006; # If the script that is loading Module::Install is from the future, # then make will detect this and cause it to re-run over and over # again. This is bad. Rather than taking action to touch it (which # is unreliable on some platforms and requires write permissions) # for now we should catch this and refuse to run. if ( -f $0 ) { my $s = (stat($0))[9]; # If the modification time is only slightly in the future, # sleep briefly to remove the problem. my $a = $s - time; if ( $a > 0 and $a < 5 ) { sleep 5 } # Too far in the future, throw an error. my $t = time; if ( $s > $t ) { die <<"END_DIE" } Your installer $0 has a modification time in the future ($s > $t). This is known to create infinite loops in make. Please correct this, then run $0 again. END_DIE } # Build.PL was formerly supported, but no longer is due to excessive # difficulty in implementing every single feature twice. if ( $0 =~ /Build.PL$/i ) { die <<"END_DIE" } Module::Install no longer supports Build.PL. It was impossible to maintain duel backends, and has been deprecated. Please remove all Build.PL files and only use the Makefile.PL installer. END_DIE #------------------------------------------------------------- # To save some more typing in Module::Install installers, every... # use inc::Module::Install # ...also acts as an implicit use strict. $^H |= strict::bits(qw(refs subs vars)); #------------------------------------------------------------- unless ( -f $self->{file} ) { foreach my $key (keys %INC) { delete $INC{$key} if $key =~ /Module\/Install/; } local $^W; require "$self->{path}/$self->{dispatch}.pm"; File::Path::mkpath("$self->{prefix}/$self->{author}"); $self->{admin} = "$self->{name}::$self->{dispatch}"->new( _top => $self ); $self->{admin}->init; @_ = ($class, _self => $self); goto &{"$self->{name}::import"}; } local $^W; *{"${who}::AUTOLOAD"} = $self->autoload; $self->preload; # Unregister loader and worker packages so subdirs can use them again delete $INC{'inc/Module/Install.pm'}; delete $INC{'Module/Install.pm'}; # Save to the singleton $MAIN = $self; return 1; } sub autoload { my $self = shift; my $who = $self->_caller; my $cwd = Cwd::getcwd(); my $sym = "${who}::AUTOLOAD"; $sym->{$cwd} = sub { my $pwd = Cwd::getcwd(); if ( my $code = $sym->{$pwd} ) { # Delegate back to parent dirs goto &$code unless $cwd eq $pwd; } unless ($$sym =~ s/([^:]+)$//) { # XXX: it looks like we can't retrieve the missing function # via $$sym (usually $main::AUTOLOAD) in this case. # I'm still wondering if we should slurp Makefile.PL to # get some context or not ... my ($package, $file, $line) = caller; die <<"EOT"; Unknown function is found at $file line $line. Execution of $file aborted due to runtime errors. If you're a contributor to a project, you may need to install some Module::Install extensions from CPAN (or other repository). If you're a user of a module, please contact the author. EOT } my $method = $1; if ( uc($method) eq $method ) { # Do nothing return; } elsif ( $method =~ /^_/ and $self->can($method) ) { # Dispatch to the root M:I class return $self->$method(@_); } # Dispatch to the appropriate plugin unshift @_, ( $self, $1 ); goto &{$self->can('call')}; }; } sub preload { my $self = shift; unless ( $self->{extensions} ) { $self->load_extensions( "$self->{prefix}/$self->{path}", $self ); } my @exts = @{$self->{extensions}}; unless ( @exts ) { @exts = $self->{admin}->load_all_extensions; } my %seen; foreach my $obj ( @exts ) { while (my ($method, $glob) = each %{ref($obj) . '::'}) { next unless $obj->can($method); next if $method =~ /^_/; next if $method eq uc($method); $seen{$method}++; } } my $who = $self->_caller; foreach my $name ( sort keys %seen ) { local $^W; *{"${who}::$name"} = sub { ${"${who}::AUTOLOAD"} = "${who}::$name"; goto &{"${who}::AUTOLOAD"}; }; } } sub new { my ($class, %args) = @_; delete $INC{'FindBin.pm'}; { # to suppress the redefine warning local $SIG{__WARN__} = sub {}; require FindBin; } # ignore the prefix on extension modules built from top level. my $base_path = Cwd::abs_path($FindBin::Bin); unless ( Cwd::abs_path(Cwd::getcwd()) eq $base_path ) { delete $args{prefix}; } return $args{_self} if $args{_self}; $base_path = VMS::Filespec::unixify($base_path) if $^O eq 'VMS'; $args{dispatch} ||= 'Admin'; $args{prefix} ||= 'inc'; $args{author} ||= ($^O eq 'VMS' ? '_author' : '.author'); $args{bundle} ||= 'inc/BUNDLES'; $args{base} ||= $base_path; $class =~ s/^\Q$args{prefix}\E:://; $args{name} ||= $class; $args{version} ||= $class->VERSION; unless ( $args{path} ) { $args{path} = $args{name}; $args{path} =~ s!::!/!g; } $args{file} ||= "$args{base}/$args{prefix}/$args{path}.pm"; $args{wrote} = 0; bless( \%args, $class ); } sub call { my ($self, $method) = @_; my $obj = $self->load($method) or return; splice(@_, 0, 2, $obj); goto &{$obj->can($method)}; } sub load { my ($self, $method) = @_; $self->load_extensions( "$self->{prefix}/$self->{path}", $self ) unless $self->{extensions}; foreach my $obj (@{$self->{extensions}}) { return $obj if $obj->can($method); } my $admin = $self->{admin} or die <<"END_DIE"; The '$method' method does not exist in the '$self->{prefix}' path! Please remove the '$self->{prefix}' directory and run $0 again to load it. END_DIE my $obj = $admin->load($method, 1); push @{$self->{extensions}}, $obj; $obj; } sub load_extensions { my ($self, $path, $top) = @_; my $should_reload = 0; unless ( grep { ! ref $_ and lc $_ eq lc $self->{prefix} } @INC ) { unshift @INC, $self->{prefix}; $should_reload = 1; } foreach my $rv ( $self->find_extensions($path) ) { my ($file, $pkg) = @{$rv}; next if $self->{pathnames}{$pkg}; local $@; my $new = eval { local $^W; require $file; $pkg->can('new') }; unless ( $new ) { warn $@ if $@; next; } $self->{pathnames}{$pkg} = $should_reload ? delete $INC{$file} : $INC{$file}; push @{$self->{extensions}}, &{$new}($pkg, _top => $top ); } $self->{extensions} ||= []; } sub find_extensions { my ($self, $path) = @_; my @found; File::Find::find( {no_chdir => 1, wanted => sub { my $file = $File::Find::name; return unless $file =~ m!^\Q$path\E/(.+)\.pm\Z!is; my $subpath = $1; return if lc($subpath) eq lc($self->{dispatch}); $file = "$self->{path}/$subpath.pm"; my $pkg = "$self->{name}::$subpath"; $pkg =~ s!/!::!g; # If we have a mixed-case package name, assume case has been preserved # correctly. Otherwise, root through the file to locate the case-preserved # version of the package name. if ( $subpath eq lc($subpath) || $subpath eq uc($subpath) ) { my $content = Module::Install::_read($File::Find::name); my $in_pod = 0; foreach ( split /\n/, $content ) { $in_pod = 1 if /^=\w/; $in_pod = 0 if /^=cut/; next if ($in_pod || /^=cut/); # skip pod text next if /^\s*#/; # and comments if ( m/^\s*package\s+($pkg)\s*;/i ) { $pkg = $1; last; } } } push @found, [ $file, $pkg ]; }}, $path ) if -d $path; @found; } ##################################################################### # Common Utility Functions sub _caller { my $depth = 0; my $call = caller($depth); while ( $call eq __PACKAGE__ ) { $depth++; $call = caller($depth); } return $call; } sub _read { local *FH; open( FH, '<', $_[0] ) or die "open($_[0]): $!"; binmode FH; my $string = do { local $/; }; close FH or die "close($_[0]): $!"; return $string; } sub _readperl { my $string = Module::Install::_read($_[0]); $string =~ s/(?:\015{1,2}\012|\015|\012)/\n/sg; $string =~ s/(\n)\n*__(?:DATA|END)__\b.*\z/$1/s; $string =~ s/\n\n=\w+.+?\n\n=cut\b.+?\n+/\n\n/sg; return $string; } sub _readpod { my $string = Module::Install::_read($_[0]); $string =~ s/(?:\015{1,2}\012|\015|\012)/\n/sg; return $string if $_[0] =~ /\.pod\z/; $string =~ s/(^|\n=cut\b.+?\n+)[^=\s].+?\n(\n=\w+|\z)/$1$2/sg; $string =~ s/\n*=pod\b[^\n]*\n+/\n\n/sg; $string =~ s/\n*=cut\b[^\n]*\n+/\n\n/sg; $string =~ s/^\n+//s; return $string; } sub _write { local *FH; open( FH, '>', $_[0] ) or die "open($_[0]): $!"; binmode FH; foreach ( 1 .. $#_ ) { print FH $_[$_] or die "print($_[0]): $!"; } close FH or die "close($_[0]): $!"; } # _version is for processing module versions (eg, 1.03_05) not # Perl versions (eg, 5.8.1). sub _version { my $s = shift || 0; my $d =()= $s =~ /(\.)/g; if ( $d >= 2 ) { # Normalise multipart versions $s =~ s/(\.)(\d{1,3})/sprintf("$1%03d",$2)/eg; } $s =~ s/^(\d+)\.?//; my $l = $1 || 0; my @v = map { $_ . '0' x (3 - length $_) } $s =~ /(\d{1,3})\D?/g; $l = $l . '.' . join '', @v if @v; return $l + 0; } sub _cmp { _version($_[1]) <=> _version($_[2]); } # Cloned from Params::Util::_CLASS sub _CLASS { ( defined $_[0] and ! ref $_[0] and $_[0] =~ m/^[^\W\d]\w*(?:::\w+)*\z/s ) ? $_[0] : undef; } 1; # Copyright 2008 - 2012 Adam Kennedy. Email-Address-List-0.07/Changes0000644000076500000240000000165215204135503015646 0ustar sunnavystaff0.07 2026-05-22 - Update whitespace removal code to remove all types of unicode whitespace in addition to ASCII. 0.06 2019-01-02 - Changes to address CVE-2018-18898 which could allow DDoS-type attacks. Thanks to Lukas Kramer for reporting the issue and Alex Vandiver for contributing fixes. - Fix pathological backtracking for unkown regex - Fix pathological backtracking in obs-phrase(i.e. obs-display-name) - Fix pathological backtracking in cfws, quoted strings 0.05 2014-02-16 - Correct typos in documentation; no functionality changes 0.04 2014-02-03 - Update minimum perl version to 5.10, because of use of ++ quantifier 0.03 2014-01-22 - Include documentation updates present in the released version of 0.01, but never checked into the repository 0.02 2014-01-15 - Prevent a quadratic-time check when the provided string did not contain a valid address 0.01 2012-11-17 - Initial release Email-Address-List-0.07/MANIFEST0000644000076500000240000000115015204136044015476 0ustar sunnavystaffChanges inc/Module/Install.pm inc/Module/Install/Base.pm inc/Module/Install/Can.pm inc/Module/Install/Fetch.pm inc/Module/Install/Makefile.pm inc/Module/Install/Metadata.pm inc/Module/Install/ReadmeFromPod.pm inc/Module/Install/Win32.pm inc/Module/Install/WriteAll.pm lib/Email/Address/List.pm Makefile.PL MANIFEST This list of files META.yml README t/basics.t t/data/pathological.txt t/data/RFC5233.single.obs.json t/data/RFC5233.single.obs.txt t/data/RFC5233.single.valid.json t/data/RFC5233.single.valid.txt t/generate.pl t/invalid.t t/invisible-chars.t t/pathological.t t/random.combinations.t t/single.suit.t Email-Address-List-0.07/t/0000755000076500000240000000000015204136124014612 5ustar sunnavystaffEmail-Address-List-0.07/t/random.combinations.t0000644000076500000240000000301414777360437020765 0ustar sunnavystaffuse strict; use warnings; use Test::More; use JSON (); use_ok('Email::Address::List'); my @data; foreach my $file (qw(t/data/RFC5233.single.valid.json t/data/RFC5233.single.obs.json)) { my $obsolete = $file =~ /\bobs\b/? 1 : 0; open my $fh, '<', $file; push @data, @{ JSON->new->decode( do { local $/; <$fh> } ) }; close $fh; } diag "srand is ". (my $seed = int rand( 2**16-1 )); srand($seed); for (1..100) { my @list; push @list, $data[ rand @data ] for 1..3; my $line = join ', ', map $_->{'mailbox'}, @list; note $line; my @res = Email::Address::List->parse( $line ); is scalar @res, scalar @list; for (my $i = 0; $i < @list; $i++) { my $test = $list[$i]; my $v = $res[$i]{'value'}; is $v->phrase, $test->{'display-name'}, 'correct value'; is $v->address, $test->{'address'}, 'correct value'; is $v->comment, join( ' ', @{$test->{'comments'}} ), 'correct value'; } } for (1..100) { my @list; push @list, $data[ rand @data ] for 1..3; my $line = join ",\n ,", '', (map $_->{'mailbox'}, @list), ''; note $line; my @res = Email::Address::List->parse( $line ); is scalar @res, scalar @list; for (my $i = 0; $i < @list; $i++) { my $test = $list[$i]; my $v = $res[$i]{'value'}; is $v->phrase, $test->{'display-name'}, 'correct value'; is $v->address, $test->{'address'}, 'correct value'; is $v->comment, join( ' ', @{$test->{'comments'}} ), 'correct value'; } } done_testing; Email-Address-List-0.07/t/invalid.t0000644000076500000240000000137314777360437016455 0ustar sunnavystaffuse strict; use warnings; use Test::More tests => 4; use_ok 'Email::Address::List'; run_test('root', [{type => 'unknown', value => 'root'}]); run_test( 'boo@boo, root, foo@foo', [ {type => 'mailbox', value => 'boo@boo', obsolete => 0, not_ascii => 0}, {type => 'unknown', value => 'root'}, {type => 'mailbox', value => 'foo@foo', obsolete => 0, not_ascii => 0}, ], ); run_test( '"Doe, John" foo@foo, root', [ {type => 'unknown', value => '"Doe, John" foo@foo' }, {type => 'unknown', value => 'root'}, ], ); sub run_test { my $line = shift; my @list = Email::Address::List->parse($line); $_->{'value'} .= '' foreach grep defined $_->{'value'}, @list; is_deeply( \@list, shift ); } Email-Address-List-0.07/t/generate.pl0000644000076500000240000000266014777360437016771 0ustar sunnavystaffuse strict; use warnings; use autodie; use lib 'lib/'; use Email::Address::List; foreach my $file (qw(t/data/RFC5233.single.valid.txt t/data/RFC5233.single.obs.txt)) { process_file($file); } sub process_file { my $file = shift; open my $fh, '<', $file; my @list = split /(?:\r*\n){2,}/, do { local $/; <$fh> }; close $fh; my %CRE = %Email::Address::List::CRE; foreach my $e (splice @list) { my ($desc, $mailbox) = split /\r*\n/, $e, 2; $desc =~ s/^#\s*//; my %res = ( description => $desc, mailbox => $mailbox, ); my @parse; unless ( @parse = ($mailbox =~ /^($CRE{'mailbox'})$/) ) { unless ( @parse = ($mailbox =~ /^($CRE{'obs-mailbox'})$/) ) { warn "Failed to parse $mailbox"; next; } } my (undef, $display_name, $local_part, $domain, @comments) = Email::Address::List->_process_mailbox( @parse ); $res{'display-name'} = $display_name; $res{'address'} = "$local_part\@$domain"; $res{'domain'} = $domain; $res{'local-part'} = $local_part; $res{'local-part'} =~ s/\\(.)/$1/g if $res{'local-part'} =~ s/^"(.*)"$/$1/; $res{'comments'} = \@comments; push @list, \%res; } use JSON; $file =~ s/txt$/json/; open $fh, '>', $file; print $fh JSON->new->pretty->encode(\@list); close $fh; }Email-Address-List-0.07/t/single.suit.t0000644000076500000240000000157714777360437017301 0ustar sunnavystaffuse strict; use warnings; use Test::More; use JSON (); use_ok('Email::Address::List'); foreach my $file (qw(t/data/RFC5233.single.valid.json t/data/RFC5233.single.obs.json)) { my $obsolete = $file =~ /\bobs\b/? 1 : 0; open my $fh, '<', $file; my $tests = JSON->new->decode( do { local $/; <$fh> } ); close $fh; foreach my $test ( @$tests ) { note $test->{'description'}; my @list = Email::Address::List->parse( $test->{'mailbox'} ); is scalar @list, 1, "one entry in result set" or do { use Data::Dumper; diag Dumper \@list }; is $list[0]{'type'}, 'mailbox', 'one mailbox'; my $v = $list[0]{'value'}; is $v->phrase, $test->{'display-name'}, 'correct value'; is $v->address, $test->{'address'}, 'correct value'; is $v->comment, join( ' ', @{$test->{'comments'}} ), 'correct value'; } } done_testing(); Email-Address-List-0.07/t/invisible-chars.t0000644000076500000240000000705715204135414020073 0ustar sunnavystaffuse strict; use warnings; use Test::More; use Email::Address::List; # An addr-spec (local-part@domain) should never contain # whitespace or invisible format characters. They sneak in via # copy/paste and produce undeliverable mail. # # Test the following: # - ASCII whitespace (space, tab, ...) # - Unicode whitespace (NBSP, EM SPACE, IDEOGRAPHIC SPACE, ...) # - Unicode format characters \p{Cf} (ZWSP, ZWJ, ZWNJ, BOM, # soft hyphen, bidi marks, ...) sub addr_of { my $line = shift; my @list = Email::Address::List->parse($line); return undef unless @list == 1 && $list[0]{type} eq 'mailbox'; return $list[0]{value}->address; } # name => character. Mix of Unicode general categories \p{Z} # (separators), other \p{White_Space}, and \p{Cf} (format). my @cases = ( [ 'SPACE' => " " ], [ 'TAB' => "\t" ], [ 'U+00A0 NO-BREAK SPACE' => "\x{00A0}" ], [ 'U+1680 OGHAM SPACE MARK'=> "\x{1680}" ], [ 'U+2003 EM SPACE' => "\x{2003}" ], [ 'U+202F NARROW NBSP' => "\x{202F}" ], [ 'U+3000 IDEOGRAPHIC SP' => "\x{3000}" ], [ 'U+00AD SOFT HYPHEN' => "\x{00AD}" ], [ 'U+200B ZERO WIDTH SP' => "\x{200B}" ], [ 'U+200C ZWNJ' => "\x{200C}" ], [ 'U+200D ZWJ' => "\x{200D}" ], [ 'U+200E LRM' => "\x{200E}" ], [ 'U+200F RLM' => "\x{200F}" ], [ 'U+2060 WORD JOINER' => "\x{2060}" ], [ 'U+FEFF ZWNBSP / BOM' => "\x{FEFF}" ], ); # Each character, in every position around or inside the addr-spec. for my $case (@cases) { my ($name, $char) = @$case; is addr_of("foo\@example.com$char"), 'foo@example.com', "trailing $name stripped"; is addr_of("${char}foo\@example.com"), 'foo@example.com', "leading $name stripped"; is addr_of("foo${char}\@example.com"), 'foo@example.com', "$name before \@ stripped"; is addr_of("foo\@${char}example.com"), 'foo@example.com', "$name after \@ stripped"; is addr_of("foo\@example${char}.com"), 'foo@example.com', "$name inside domain stripped"; is addr_of(""), 'foo@example.com', "$name inside <...> stripped"; } # Display name + angle-addr: address cleaned, phrase preserved. { my @list = Email::Address::List->parse( qq{"Jane Doe" }); is scalar @list, 1, 'name-addr with U+200B parsed as one mailbox'; is $list[0]{type}, 'mailbox', '...of type mailbox'; is $list[0]{value}->address, 'foo@example.com', '...with U+200B stripped from address part'; is $list[0]{value}->phrase, 'Jane Doe', '...and display name unchanged'; } # After cleanup the address is pure ASCII -- not_ascii must be 0 # so downstream skip_not_ascii / loop-prevention checks behave. { my @list = Email::Address::List->parse("foo\@example.com\x{200B}"); is $list[0]{not_ascii}, 0, 'cleaned address reported as ASCII (not_ascii=0)'; } # Comma-separated list: one address with invisibles, one without. { my @list = Email::Address::List->parse( "foo\@example.com\x{200B}, bar\@example.com"); is scalar @list, 2, 'two mailboxes in comma list'; is $list[0]{value}->address, 'foo@example.com', '...first address cleaned'; is $list[1]{value}->address, 'bar@example.com', '...second address unaffected'; } # Multiple distinct invisibles in one address all stripped. is addr_of("\x{FEFF}foo\x{200B}\@example.com\x{200D}"), 'foo@example.com', 'multiple distinct invisible chars all stripped'; done_testing(); Email-Address-List-0.07/t/pathological.t0000644000076500000240000000161115156600425017452 0ustar sunnavystaffuse strict; use warnings; use Test::More; use Email::Address::List; use Time::HiRes; my @cases = ( "a" x 25, "a " x 25, 'a()' x 25, '() ' x 2000, ); { # This test case is from the CVE-2015-7686 report open my $f, "<", "t/data/pathological.txt"; my $line = <$f>; chomp $line; push @cases, $line; } for my $testcase (@cases) { my $start = Time::HiRes::time(); my @addresses = Email::Address::List->parse($testcase); # Realistic expected is ~0.0001s. In the pathological case, however, it # will take ~80s. 0.5s is thus unlikely to trip either false-positive # of false-negative, being approximitely two orders of magnitude away # from both. We use actual elapsed time, rather than alarm(), for # portability. ok(Time::HiRes::time() - $start < 0.5, "Extracting from >>$testcase<< should take finite time"); } done_testing(); Email-Address-List-0.07/t/basics.t0000644000076500000240000000040314777360437016264 0ustar sunnavystaffuse strict; use warnings; use Test::More tests => 3; use_ok 'Email::Address::List'; { my @addresses = Email::Address::List->parse(q{ruz@bestpractical.com}); is scalar @addresses, 1; is $addresses[0]{'value'}->format, q{ruz@bestpractical.com}; } Email-Address-List-0.07/t/data/0000755000076500000240000000000015204136124015523 5ustar sunnavystaffEmail-Address-List-0.07/t/data/RFC5233.single.valid.txt0000644000076500000240000000225314777360437021617 0ustar sunnavystaff# Appendix A.1.1. Simple addressing John Doe # Appendix A.1.1. Simple addressing Mary Smith # Appendix A.1.2. Different Types of Mailboxes "Joe Q. Public" # Appendix A.1.2. Different Types of Mailboxes Mary Smith # Appendix A.1.2. Different Types of Mailboxes jdoe@example.org # Appendix A.1.2. Different Types of Mailboxes Who? # Appendix A.1.2. Different Types of Mailboxes # Appendix A.1.2. Different Types of Mailboxes "Giant; \"Big\" Box" # Appendix A.1.2. Different Types of Mailboxes Pete(A nice \) chap) # Appendix A.1.2. Different Types of Mailboxes Chris Jones # Appendix A.1.2. Different Types of Mailboxes John (my dear friend) # special in display-name with quoting "()<>[]:;@\\,.\"" # comments with spaces in every possible possition (c1) foo (c2) bar (c3) < (c4) baz (c5) @ (c6) domain.com (c7) > # phrase with strange quoting foo "\\" bar # local part with redundant quoting "foo.bar"@zoo.info Email-Address-List-0.07/t/data/RFC5233.single.valid.json0000644000076500000240000001103114777360437021743 0ustar sunnavystaff[ { "domain" : "machine.example", "local-part" : "jdoe", "address" : "jdoe@machine.example", "mailbox" : "John Doe ", "comments" : [], "description" : "Appendix A.1.1. Simple addressing", "display-name" : "John Doe" }, { "domain" : "example.net", "local-part" : "mary", "address" : "mary@example.net", "mailbox" : "Mary Smith ", "comments" : [], "description" : "Appendix A.1.1. Simple addressing", "display-name" : "Mary Smith" }, { "domain" : "example.com", "local-part" : "john.q.public", "address" : "john.q.public@example.com", "mailbox" : "\"Joe Q. Public\" ", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Joe Q. Public" }, { "domain" : "x.test", "local-part" : "mary", "address" : "mary@x.test", "mailbox" : "Mary Smith ", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Mary Smith" }, { "domain" : "example.org", "local-part" : "jdoe", "address" : "jdoe@example.org", "mailbox" : "jdoe@example.org", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : null }, { "domain" : "y.test", "local-part" : "one", "address" : "one@y.test", "mailbox" : "Who? ", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Who?" }, { "domain" : "nil.test", "local-part" : "boss", "address" : "boss@nil.test", "mailbox" : "", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : null }, { "domain" : "example.net", "local-part" : "sysservices", "address" : "sysservices@example.net", "mailbox" : "\"Giant; \\\"Big\\\" Box\" ", "comments" : [], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Giant; \"Big\" Box" }, { "domain" : "silly.test", "local-part" : "pete", "address" : "pete@silly.test", "mailbox" : "Pete(A nice \\) chap) ", "comments" : [ "(A nice \\) chap)", "(his account)", "(his host)" ], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Pete" }, { "domain" : "public.example", "local-part" : "c", "address" : "c@public.example", "mailbox" : "Chris Jones ", "comments" : [ "(Chris's host.)" ], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "Chris Jones" }, { "domain" : "one.test", "local-part" : "jdoe", "address" : "jdoe@one.test", "mailbox" : "John (my dear friend)", "comments" : [ "(my dear friend)" ], "description" : "Appendix A.1.2. Different Types of Mailboxes", "display-name" : "John" }, { "domain" : "bar.biz", "local-part" : "foo", "address" : "foo@bar.biz", "mailbox" : "\"()<>[]:;@\\\\,.\\\"\" ", "comments" : [], "description" : "special in display-name with quoting", "display-name" : "()<>[]:;@\\,.\"" }, { "domain" : "domain.com", "local-part" : "baz", "address" : "baz@domain.com", "mailbox" : " (c1) foo (c2) bar (c3) < (c4) baz (c5) @ (c6) domain.com (c7) >", "comments" : [ "(c1)", "(c2)", "(c3)", "(c4)", "(c5)", "(c6)", "(c7)" ], "description" : "comments with spaces in every possible possition", "display-name" : "foo bar" }, { "domain" : "bar.info", "local-part" : "foo", "address" : "foo@bar.info", "mailbox" : "foo \"\\\\\" bar ", "comments" : [], "description" : "phrase with strange quoting", "display-name" : "foo \"\\\" bar" }, { "domain" : "zoo.info", "local-part" : "foo.bar", "address" : "foo.bar@zoo.info", "mailbox" : "\"foo.bar\"@zoo.info", "comments" : [], "description" : "local part with redundant quoting", "display-name" : null } ] Email-Address-List-0.07/t/data/RFC5233.single.obs.json0000644000076500000240000000402414777360437021433 0ustar sunnavystaff[ { "domain" : "example.com", "local-part" : "john.q.public", "address" : "john.q.public@example.com", "mailbox" : "Joe Q. Public ", "comments" : [], "description" : "Appendix A.6.1. Obsolete Addressing", "display-name" : "Joe Q. Public" }, { "domain" : "example.net", "local-part" : "mary", "address" : "mary@example.net", "mailbox" : "Mary Smith <@node.test:mary@example.net>", "comments" : [], "description" : "Appendix A.6.1. Obsolete Addressing", "display-name" : "Mary Smith" }, { "domain" : "test.example", "local-part" : "jdoe", "address" : "jdoe@test.example", "mailbox" : "jdoe@test . example", "comments" : [], "description" : "Appendix A.6.1. Obsolete Addressing", "display-name" : null }, { "domain" : "machine.example", "local-part" : "jdoe", "address" : "jdoe@machine.example", "mailbox" : "John Doe ", "comments" : [ "(comment)" ], "description" : "Appendix A.6.3. Obsolete White Space and Comments", "display-name" : "John Doe" }, { "domain" : "example.net", "local-part" : "mary", "address" : "mary@example.net", "mailbox" : "Mary Smith\n \n ", "comments" : [], "description" : "Appendix A.6.3. Obsolete White Space and Comments", "display-name" : "Mary Smith" }, { "domain" : "domain.com", "local-part" : "baz.zoo", "address" : "baz.zoo@domain.com", "mailbox" : "(c1) foo (c2) bar (c3) < (c4) baz (c5) . (c6) zoo (c7) @ (c8) domain (c9) . (c10) com (c11) >", "comments" : [ "(c1)", "(c2)", "(c3)", "(c4)", "(c5)", "(c6)", "(c7)", "(c8)", "(c9)", "(c10)", "(c11)" ], "description" : "comments all over the place", "display-name" : "foo bar" } ] Email-Address-List-0.07/t/data/RFC5233.single.obs.txt0000644000076500000240000000104014777360437021274 0ustar sunnavystaff# Appendix A.6.1. Obsolete Addressing Joe Q. Public # Appendix A.6.1. Obsolete Addressing Mary Smith <@node.test:mary@example.net> # Appendix A.6.1. Obsolete Addressing jdoe@test . example # Appendix A.6.3. Obsolete White Space and Comments John Doe # Appendix A.6.3. Obsolete White Space and Comments Mary Smith # comments all over the place (c1) foo (c2) bar (c3) < (c4) baz (c5) . (c6) zoo (c7) @ (c8) domain (c9) . (c10) com (c11) >Email-Address-List-0.07/t/data/pathological.txt0000644000076500000240000000050415156600414020735 0ustar sunnavystaff\(¯¯`·.¥«P®ÎÑç€ØfTh€ÐÅ®K»¥.·`¯¯\) , "(> \" \" <) ( ='o'= ) (\")___(\") sWeEtAnGeLtHePrInCeSsOfThEsKy" , "(i)cRiStIaN(i)" , "(S)MaNu_vuOLeAmMazZaReNimOe(*)MiAo(@)" Email-Address-List-0.07/README0000644000076500000240000001232415204135503015231 0ustar sunnavystaffNAME Email::Address::List - RFC close address list parsing SYNOPSIS use Email::Address::List; my $header = <<'END'; Foo Bar , (an obsolete comment),,, a group: a . weird . address @ for-real .biz ; invalid thingy, < more@example.com > END my @list = Email::Address::List->parse($header); foreach my $e ( @list ) { if ($e->{'type'} eq 'mailbox') { print "an address: ", $e->{'value'}->format ,"\n"; } else { print $e->{'type'}, "\n" } } # prints: # an address: "Foo Bar" # comment # group start # an address: a.weird.address@forreal.biz # group end # unknown # an address: more@example.com DESCRIPTION Parser for From, To, Cc, Bcc, Reply-To, Sender and previous prefixed with Resent- (eg Resent-From) headers. REASONING Email::Address is good at parsing addresses out of any text even mentioned headers and this module is derived work from Email::Address. However, mentioned headers are structured and contain lists of addresses. Most of the time you want to parse such field from start to end keeping everything even if it's an invalid input. METHODS parse A class method that takes a header value (w/o name and :) and a set of named options, for example: my @list = Email::Address::List->parse( $line, option => 1 ); Returns list of hashes. Each hash at least has 'type' key that describes the entry. Types: mailbox A mailbox entry with Email::Address object under value key. If mailbox has obsolete parts then 'obsolete' is true. If address (not display-name/phrase or comments, but local-part@domain) contains not ASCII chars then 'not_ascii' is set to true. According to RFC 5322 not ASCII chars are not allowed within mailbox. However, there are no big problems if those are used and actually RFC 6532 extends a few rules from 5322 with UTF8-non-ascii. Either use the feature or just skip such addresses with skip_not_ascii option. Whitespace and Unicode format characters (category "\p{Cf}": ZERO WIDTH SPACE, ZWJ, ZWNJ, BOM, soft hyphen, bidi marks, etc.) are stripped from "local-part" and "domain". Such characters are typically introduced by copy/paste; left in, they produce undeliverable mail. Stripping does not apply inside quoted local-parts (their contents are preserved literally), nor to the display-name or comments. group start Some headers with mailboxes may contain groupped addresses. This element is returned for position where group starts. Under value key you find name of the group. NOTE that value is not post processed at the moment, so it may contain spaces, comments, quoted strings and other noise. Author willing to take patches and warns that this will be changed at some point without additional notifications, so if you need groups info then you better send a patch :) Groups can not be nested, but one field may have multiple groups or mix of addresses that are in a group and not in any. See skip_groups option. group end Returned when a group ends. comment Obsolete syntax allows one to use standalone comments between mailboxes that can not be addressed to any mailbox. In such situations a comment returned as an entry of this type. Comment itself is under value. unknown Returned if parser met something that shouldn't be there. Parser tries to recover by jumping over to next comma (or semicolon if inside group) that is out quoted string or comment, so "foo, bar, baz" string results in three unknown entries. Jumping over comments and quoted strings means that parser is very sensitive to unbalanced quotes and parens, but it's on purpose. It can be controlled which elements are skipped, for example: Email::Address::List->parse($line, skip_unknown => 1, ...); skip_comments Skips comments between mailboxes. Comments inside and next to a mailbox are not skipped, but returned as part of mailbox entry. skip_not_ascii Skips mailboxes where address part has not ASCII characters. skip_groups Skips group starts and end elements, however emails within groups are still returned. skip_unknown Skip anything that is not recognizable. It still tries to recover as described earlier. AUTHOR Best Practical Solutions, LLC BUGS All bugs should be reported via email to L or via the web at L. LICENSE AND COPYRIGHT Copyright (C) 2012-2026 Best Practical Solutions, LLC. This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself. Email-Address-List-0.07/META.yml0000644000076500000240000000124215204135503015617 0ustar sunnavystaff--- abstract: 'RFC close address list parsing' author: - 'Best Practical Solutions, LLC ' build_requires: ExtUtils::MakeMaker: 6.59 JSON: 0 Test::More: 0 configure_requires: ExtUtils::MakeMaker: 6.59 distribution_type: module dynamic_config: 1 generated_by: 'Module::Install version 1.21' license: perl meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html version: 1.4 name: Email-Address-List no_index: directory: - inc - t requires: Email::Address: 0 perl: 5.10.0 resources: license: http://dev.perl.org/licenses/ repository: https://github.com/bestpractical/email-address-list version: '0.07' Email-Address-List-0.07/lib/0000755000076500000240000000000015204136124015115 5ustar sunnavystaffEmail-Address-List-0.07/lib/Email/0000755000076500000240000000000015204136124016144 5ustar sunnavystaffEmail-Address-List-0.07/lib/Email/Address/0000755000076500000240000000000015204136124017531 5ustar sunnavystaffEmail-Address-List-0.07/lib/Email/Address/List.pm0000644000076500000240000003321615204135503021007 0ustar sunnavystaffuse strict; use warnings; use 5.010; package Email::Address::List; our $VERSION = '0.07'; use Email::Address; =head1 NAME Email::Address::List - RFC close address list parsing =head1 SYNOPSIS use Email::Address::List; my $header = <<'END'; Foo Bar , (an obsolete comment),,, a group: a . weird . address @ for-real .biz ; invalid thingy, < more@example.com > END my @list = Email::Address::List->parse($header); foreach my $e ( @list ) { if ($e->{'type'} eq 'mailbox') { print "an address: ", $e->{'value'}->format ,"\n"; } else { print $e->{'type'}, "\n" } } # prints: # an address: "Foo Bar" # comment # group start # an address: a.weird.address@forreal.biz # group end # unknown # an address: more@example.com =head1 DESCRIPTION Parser for From, To, Cc, Bcc, Reply-To, Sender and previous prefixed with Resent- (eg Resent-From) headers. =head1 REASONING L is good at parsing addresses out of any text even mentioned headers and this module is derived work from Email::Address. However, mentioned headers are structured and contain lists of addresses. Most of the time you want to parse such field from start to end keeping everything even if it's an invalid input. =head1 METHODS =head2 parse A class method that takes a header value (w/o name and :) and a set of named options, for example: my @list = Email::Address::List->parse( $line, option => 1 ); Returns list of hashes. Each hash at least has 'type' key that describes the entry. Types: =over 4 =item mailbox A mailbox entry with L object under value key. If mailbox has obsolete parts then 'obsolete' is true. If address (not display-name/phrase or comments, but local-part@domain) contains not ASCII chars then 'not_ascii' is set to true. According to RFC 5322 not ASCII chars are not allowed within mailbox. However, there are no big problems if those are used and actually RFC 6532 extends a few rules from 5322 with UTF8-non-ascii. Either use the feature or just skip such addresses with skip_not_ascii option. Whitespace and Unicode format characters (category C<\p{Cf}>: ZERO WIDTH SPACE, ZWJ, ZWNJ, BOM, soft hyphen, bidi marks, etc.) are stripped from C and C. Such characters are typically introduced by copy/paste; left in, they produce undeliverable mail. Stripping does not apply inside quoted local-parts (their contents are preserved literally), nor to the display-name or comments. =item group start Some headers with mailboxes may contain groupped addresses. This element is returned for position where group starts. Under value key you find name of the group. B that value is not post processed at the moment, so it may contain spaces, comments, quoted strings and other noise. Author willing to take patches and warns that this will be changed at some point without additional notifications, so if you need groups info then you better send a patch :) Groups can not be nested, but one field may have multiple groups or mix of addresses that are in a group and not in any. See skip_groups option. =item group end Returned when a group ends. =item comment Obsolete syntax allows one to use standalone comments between mailboxes that can not be addressed to any mailbox. In such situations a comment returned as an entry of this type. Comment itself is under value. =item unknown Returned if parser met something that shouldn't be there. Parser tries to recover by jumping over to next comma (or semicolon if inside group) that is out quoted string or comment, so "foo, bar, baz" string results in three unknown entries. Jumping over comments and quoted strings means that parser is very sensitive to unbalanced quotes and parens, but it's on purpose. =back It can be controlled which elements are skipped, for example: Email::Address::List->parse($line, skip_unknown => 1, ...); =over 4 =item skip_comments Skips comments between mailboxes. Comments inside and next to a mailbox are not skipped, but returned as part of mailbox entry. =item skip_not_ascii Skips mailboxes where address part has not ASCII characters. =item skip_groups Skips group starts and end elements, however emails within groups are still returned. =item skip_unknown Skip anything that is not recognizable. It still tries to recover as described earlier. =back =cut # mailbox = name-addr / addr-spec # display-name = phrase # # from = "From:" mailbox-list CRLF # sender = "Sender:" mailbox CRLF # reply-to = "Reply-To:" address-list CRLF # # to = "To:" address-list CRLF # cc = "Cc:" address-list CRLF # bcc = "Bcc:" [address-list / CFWS] CRLF # # resent-from = "Resent-From:" mailbox-list CRLF # resent-sender = "Resent-Sender:" mailbox CRLF # resent-to = "Resent-To:" address-list CRLF # resent-cc = "Resent-Cc:" address-list CRLF # resent-bcc = "Resent-Bcc:" [address-list / CFWS] CRLF # # obs-from = "From" *WSP ":" mailbox-list CRLF # obs-sender = "Sender" *WSP ":" mailbox CRLF # obs-reply-to = "Reply-To" *WSP ":" address-list CRLF # # obs-to = "To" *WSP ":" address-list CRLF # obs-cc = "Cc" *WSP ":" address-list CRLF # obs-bcc = "Bcc" *WSP ":" (address-list / (*([CFWS] ",") [CFWS])) CRLF # # obs-resent-from = "Resent-From" *WSP ":" mailbox-list CRLF # obs-resent-send = "Resent-Sender" *WSP ":" mailbox CRLF # obs-resent-date = "Resent-Date" *WSP ":" date-time CRLF # obs-resent-to = "Resent-To" *WSP ":" address-list CRLF # obs-resent-cc = "Resent-Cc" *WSP ":" address-list CRLF # obs-resent-bcc = "Resent-Bcc" *WSP ":" (address-list / (*([CFWS] ",") [CFWS])) CRLF # obs-resent-mid = "Resent-Message-ID" *WSP ":" msg-id CRLF # obs-resent-rply = "Resent-Reply-To" *WSP ":" address-list CRLF our $COMMENT_NEST_LEVEL ||= 2; our %RE; our %CRE; $RE{'CTL'} = q{\x00-\x1F\x7F}; $RE{'special'} = q{()<>\\[\\]:;@\\\\,."}; $RE{'text'} = qr/[^\x0A\x0D]/; $RE{'quoted_pair'} = qr/\\$RE{'text'}/; $RE{'atext'} = qr/[^$RE{'CTL'}$RE{'special'}\s]/; $RE{'ctext'} = qr/[^()\\]++/; $RE{'qtext'} = qr/[^\\"]/; $RE{'dtext'} = qr/[^\[\]\\]/; ($RE{'ccontent'}, $RE{'comment'}) = (q{})x2; for (1 .. $COMMENT_NEST_LEVEL) { $RE{'ccontent'} = qr/$RE{'ctext'}|$RE{'quoted_pair'}|$RE{'comment'}/; $RE{'comment'} = qr/(?>\s*+\((?:\s*+$RE{'ccontent'})*+\s*+\)\s*+)/; } $RE{'cfws'} = qr/$RE{'comment'}++|\s*+/; $RE{'qcontent'} = qr/$RE{'qtext'}|$RE{'quoted_pair'}/; $RE{'quoted-string'} = qr/$RE{'cfws'}"$RE{'qcontent'}*+"$RE{'cfws'}/; $RE{'atom'} = qr/$RE{'cfws'}$RE{'atext'}++$RE{'cfws'}/; $RE{'word'} = qr/$RE{'atom'} | $RE{'quoted-string'}/x; $RE{'phrase'} = qr/$RE{'word'}+/x; $RE{'display-name'} = $RE{'phrase'}; $RE{'dot_atom_text'} = qr/$RE{'atext'}++(?:\.$RE{'atext'}++)*/; $RE{'dot_atom'} = qr/$RE{'cfws'}$RE{'dot_atom_text'}$RE{'cfws'}/; $RE{'local-part'} = qr/$RE{'dot_atom'}|$RE{'quoted-string'}/; $RE{'dcontent'} = qr/$RE{'dtext'}|$RE{'quoted_pair'}/; $RE{'domain_literal'} = qr/$RE{'cfws'}\[(?:\s*$RE{'dcontent'})*\s*\]$RE{'cfws'}/; $RE{'domain'} = qr/$RE{'dot_atom'}|$RE{'domain_literal'}/; $RE{'addr-spec'} = qr/$RE{'local-part'}\@$RE{'domain'}/; $RE{'angle-addr'} = qr/$RE{'cfws'} < $RE{'addr-spec'} > $RE{'cfws'}/x; $RE{'name-addr'} = qr/$RE{'display-name'}?$RE{'angle-addr'}/; $RE{'mailbox'} = qr/(?:$RE{'name-addr'}|$RE{'addr-spec'})$RE{'comment'}*/; $CRE{'addr-spec'} = qr/($RE{'local-part'})\@($RE{'domain'})/; $CRE{'mailbox'} = qr/ (?: ($RE{'display-name'})?($RE{'cfws'})<$CRE{'addr-spec'}>($RE{'cfws'}) |$CRE{'addr-spec'} )($RE{'comment'}*+) /x; $RE{'dword'} = qr/$RE{'cfws'} (?: $RE{'atom'} | \. | "$RE{'qcontent'}++" ) $RE{'cfws'}/x; $RE{'obs-phrase'} = qr/$RE{'word'} $RE{'dword'}*+/x; $RE{'obs-display-name'} = $RE{'obs-phrase'}; $RE{'obs-route'} = qr/ (?:$RE{'cfws'}|,)* \@$RE{'domain'} (?:,$RE{'cfws'}?(?:\@$RE{'domain'})?)* : /x; $RE{'obs-domain'} = qr/$RE{'atom'}(?:\.$RE{'atom'})*|$RE{'domain_literal'}/; $RE{'obs-local-part'} = qr/$RE{'word'}(?:\.$RE{'word'})*/; $RE{'obs-addr-spec'} = qr/$RE{'obs-local-part'}\@$RE{'obs-domain'}/; $CRE{'obs-addr-spec'} = qr/($RE{'obs-local-part'})\@($RE{'obs-domain'})/; $CRE{'obs-mailbox'} = qr/ (?: ($RE{'obs-display-name'})? ($RE{'cfws'})< $RE{'obs-route'}? $CRE{'obs-addr-spec'} >($RE{'cfws'}) |$CRE{'obs-addr-spec'} )($RE{'comment'}*+) /x; sub parse { my $self = shift; my %args = @_%2? (line => @_) : @_; my $line = delete $args{'line'}; my $in_group = 0; my @res; while ($line =~ /\S/) { # in obs- case we have number of optional comments/spaces/ # address-list = (address *("," address)) / obs-addr-list # obs-addr-list = *([CFWS] ",") address *("," [address / CFWS])) if ( $line =~ s/^(?:($RE{'cfws'})?,)//o ) { push @res, {type => 'comment', value => $1 } if $1 && !$args{'skip_comments'} && $1 =~ /($RE{'comment'})/; next; } $line =~ s/^\s+//o; # now it's only comma separated address where address is: # address = mailbox / group # deal with groups # group = display-name ":" [group-list] ";" [CFWS] # group-list = mailbox-list / CFWS / obs-group-list # obs-group-list = 1*([CFWS] ",") [CFWS]) if ( !$in_group && $line =~ s/^($RE{'display-name'})://o ) { push @res, {type => 'group start', value => $1 } unless $args{'skip_groups'}; $in_group = 1; next; } if ( $in_group && $line =~ s/^;// ) { push @res, {type => 'group end'} unless $args{'skip_groups'}; $in_group = 0; next; } # now we got rid of groups and cfws, 'address = mailbox' # mailbox-list = (mailbox *("," mailbox)) / obs-mbox-list # obs-mbox-list = *([CFWS] ",") mailbox *("," [mailbox / CFWS])) # so address-list is now comma separated list of mailboxes: # address-list = (mailbox *("," mailbox)) my $obsolete = 0; if ( $line =~ s/^($CRE{'mailbox'})($RE{cfws}*)(?=,|;|$)//o || ($line =~ s/^($CRE{'obs-mailbox'})($RE{cfws}*)(?=,|;|$)//o and $obsolete = 1) ) { my ($original, $phrase, $user, $host, @comments) = $self->_process_mailbox( $1,$2,$3,$4,$5,$6,$7,$8,$9 ); my $not_ascii = "$user\@$host" =~ /\P{ASCII}/? 1 : 0; next if $not_ascii && $args{skip_not_ascii}; push @res, { type => 'mailbox', value => Email::Address->new( $phrase, "$user\@$host", join(' ', @comments), $original, ), obsolete => $obsolete, not_ascii => $not_ascii, }; next; } # if we got here then something unknown on our way # try to recorver if ($in_group) { if ( $line =~ s/^([^;,"\)]*+(?:(?:$RE{'quoted-string'}|$RE{'comment'})[^;,"\)]*+)*+)(?=;|,)//o ) { push @res, { type => 'unknown', value => $1 } unless $args{'skip_unknown'}; next; } } else { if ( $line =~ s/^([^,"\)]*+(?:(?:$RE{'quoted-string'}|$RE{'comment'})[^,"\)]*+)*+)(?=,)//o ) { push @res, { type => 'unknown', value => $1 } unless $args{'skip_unknown'}; next; } } push @res, { type => 'unknown', value => $line } unless $args{'skip_unknown'}; last; } return @res; } my $dequote = sub { local $_ = shift; s/^"//; s/"$//; s/\\(.)/$1/g; return "$_"; }; my $quote = sub { local $_ = shift; s/([\\"])/\\$1/g; return qq{"$_"}; }; sub _process_mailbox { my $self = shift; my $original = shift; my @rest = (@_); my @comments; foreach ( grep defined, splice @rest ) { s{ ($RE{'quoted-string'}) | ($RE{comment}) } { $1? $1 : do { push @comments, $2; $comments[-1] =~ /^\s|\s$/? ' ' : '' } }xgoe; s/^\s+//; s/\s+$//; next unless length; push @rest, $_; } my ($host, $user, $phrase) = reverse @rest; # deal with spaces out of quoted strings s{ ($RE{'quoted-string'}) | \s+ }{ $1? $1 : ' ' }xgoe foreach grep defined, $phrase; # Strip whitespace and invisible format characters that # aren't inside a quoted-string. s{ ($RE{'quoted-string'}) | [\p{White_Space}\p{Cf}]+ }{ $1? $1 : '' }xgoe foreach $user, $host; # dequote s{ ($RE{'quoted-string'}) }{ $dequote->($1) }xgoe foreach grep defined, $phrase, $user; $user = $quote->($user) unless $user =~ /^$RE{'dot_atom'}$/; @comments = grep length, map { s/^\s+//; s/\s+$//; $_ } grep defined, @comments; return $original, $phrase, $user, $host, @comments; } =head1 AUTHOR Best Practical Solutions, LLC Emodules@bestpractical.comE =head1 BUGS All bugs should be reported via email to L or via the web at L. =head1 LICENSE AND COPYRIGHT Copyright (C) 2012-2026 Best Practical Solutions, LLC. This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut 1; Email-Address-List-0.07/Makefile.PL0000644000076500000240000000054515204135503016325 0ustar sunnavystaffuse lib '.'; use inc::Module::Install; name('Email-Address-List'); all_from 'lib/Email/Address/List.pm'; readme_from 'lib/Email/Address/List.pm'; perl_version_from 'lib/Email/Address/List.pm'; repository('https://github.com/bestpractical/email-address-list'); requires 'Email::Address'; test_requires 'Test::More'; test_requires 'JSON'; sign; WriteAll;