SMS-Send-1.06/0000755000175100017510000000000011656364027011373 5ustar adamadamSMS-Send-1.06/README0000644000175100017510000001223511656364000012245 0ustar adamadamNAME SMS::Send - Driver-based API for sending SMS messages SYNOPSIS # Create a sender my $sender = SMS::Send->new('SomeDriver', _login => 'myname', _password => 'mypassword', ); # Send a message my $sent = $sender->send_sms( text => 'This is a test message', to => '+61 (4) 1234 5678', ); # Did the send succeed. if ( $sent ) { print "Message sent ok\n"; } else { print "Failed to send message\n"; } DESCRIPTION "SMS::Send" is intended to provide a driver-based single API for sending SMS and MMS messages. The intent is to provide a single API against which to write the code to send an SMS message. At the same time, the intent is to remove the limits of some of the previous attempts at this sort of API, like "must be free internet-based SMS services". "SMS::Send" drivers are installed seperately, and might use the web, email or physical SMS hardware. It could be a free or paid. The details shouldn't matter. You should not have to care how it is actually sent, only that it has been sent (although some drivers may not be able to provide certainty). METHODS installed_drivers The "installed_drivers" the list of SMS::Send drivers that are installed on the current system. new # The most basic sender $sender = SMS::Send->new('Test'); # Indicate regional driver with :: $sender = SMS::Send->new('AU::Test'); # Pass arbitrary params to the driver $sender = SMS::Send->new('MyDriver', _login => 'adam', _password => 'adam', ); The "new" constructor creates a new SMS sender. It takes as its first parameter a driver name. These names map the class names. For example driver "Test" matches the testing driver SMS::Send::Test. Any additional params should be key/value pairs, split into two types. Params without a leading underscore are "public" options and relate to standardised features within the SMS::Send API itself. At this time, there are no usable public options. Params with a leading underscore are "private" driver-specific options and will be passed through to the driver unchanged. Returns a new SMS::Send object, or dies on error. send_sms # Send a message to a particular address my $result = $sender->send_sms( text => 'This is a test message', to => '+61 4 1234 5678', ); The "send_sms" method sends a standard text SMS message to a destination phone number. It takes a set of named parameters to describe the message and its destination, again split into two types. Params without a leading underscore are "public" options and relate to standardised features within the SMS::Send API itself. text The "text" param is compulsory and should be a plain text string of non-zero length. The maximum length is currently determined by the driver, and exceeding this length will result in an exception being thrown if you breach it. Better functionality for determining the maximum-supported length is expected in the future. You input would be welcome. to The "to" param is compulsory, and should be an international phone number as indicated by a leading plus "+" character. Punctuation in any form is allowed, and will be stripped out before it is provided to the driver. If and only if your driver is a regional driver (as indicated by a ::-seperated name such as AU::Test) the "to" number can also be in a regional-specific dialing format, "without" a leading plus "+" character. Providing a regional number to a non-regional driver will throw an exception. Any parameters with a leading underscore are considered private driver-specific options and will be passed through without alteration. Any other parameters without a leading underscore will be silently stripped out and not passed through to the driver. After calling "send_sms" the driver will do whatever is required to send the message, including (potentially, but not always) waiting for a confirmation from the network that the SMS has been sent. Given that drivers may do the actual mechanics of sending a message by quite a large variety of different methods the "send_sms" method may potentially block for some time. Timeout functionality is expected to be added later. The "send_sms" returns true if the message was sent, or the driver is fire-and-forget and unable to determine success, or false if the message was not sent. SUPPORT Bugs should be reported via the CPAN bug tracker at For other issues, contact the author. AUTHOR Adam Kennedy COPYRIGHT Copyright 2005 - 2011 Adam Kennedy. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included with this module. SMS-Send-1.06/LICENSE0000644000175100017510000004737111656364000012403 0ustar adamadam Terms of Perl itself a) the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version, or b) the "Artistic License" ---------------------------------------------------------------------------- The General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA 02139, USA. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS ---------------------------------------------------------------------------- The Artistic License Preamble The intent of this document is to state the conditions under which a Package may be copied, such that the Copyright Holder maintains some semblance of artistic control over the development of the package, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications. Definitions: - "Package" refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification. - "Standard Version" refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder. - "Copyright Holder" is whoever is named in the copyright or copyrights for the package. - "You" is you, if you're thinking about copying or distributing this Package. - "Reasonable copying fee" is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the Copyright Holder, but only to the computing community at large as a market that must bear the fee.) - "Freely Available" means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the same conditions they received it. 1. You may make and give away verbatim copies of the source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and associated disclaimers. 2. You may apply bug fixes, portability fixes and other modifications derived from the Public Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the Standard Version. 3. You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that you do at least ONE of the following: a) place your modifications in the Public Domain or otherwise make them Freely Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on a major archive site such as ftp.uu.net, or by allowing the Copyright Holder to include your modifications in the Standard Version of the Package. b) use the modified Package only within your corporation or organization. c) rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide a separate manual page for each non-standard executable that clearly documents how it differs from the Standard Version. d) make other distribution arrangements with the Copyright Holder. 4. You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following: a) distribute a Standard Version of the executables and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version. b) accompany the distribution with the machine-readable source of the Package with your modifications. c) accompany any non-standard executables with their corresponding Standard Version executables, giving the non-standard executables non-standard names, and clearly documenting the differences in manual pages (or equivalent), together with instructions on where to get the Standard Version. d) make other distribution arrangements with the Copyright Holder. 5. You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. You may not charge a fee for this Package itself. However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that you do not advertise this Package as a product of your own. 6. The scripts and library files supplied as input to or produced as output from the programs of this Package do not automatically fall under the copyright of this Package, but belong to whomever generated them, and may be sold commercially, and may be aggregated with this Package. 7. C or perl subroutines supplied by you and linked into this Package shall not be considered part of this Package. 8. The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission. 9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. The End SMS-Send-1.06/Makefile.PL0000644000175100017510000000043111656364000013332 0ustar adamadamuse inc::Module::Install::DSL 1.04; all_from lib/SMS/Send.pm requires_from lib/SMS/Send.pm requires Params::Util 1.00 requires Class::Adapter 1.05 requires Module::Pluggable 3.7 test_requires File::Spec 0.80 test_requires Test::More 0.47 SMS-Send-1.06/MYMETA.json0000644000175100017510000000263211656364023013261 0ustar adamadam{ "abstract" : "Driver-based API for sending SMS messages", "author" : [ "Adam Kennedy " ], "dynamic_config" : 0, "generated_by" : "Module::Install version 1.04, CPAN::Meta::Converter version 2.112150", "license" : [ "perl_5" ], "meta-spec" : { "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec", "version" : "2" }, "name" : "SMS-Send", "no_index" : { "directory" : [ "inc", "t", "xt" ] }, "prereqs" : { "build" : { "requires" : { "ExtUtils::MakeMaker" : "6.62", "File::Spec" : "0.80", "Test::More" : "0.47" } }, "configure" : { "requires" : { "ExtUtils::MakeMaker" : "6.62" } }, "runtime" : { "requires" : { "Class::Adapter" : "1.05", "Class::Adapter::Builder" : "1.05", "Module::Pluggable" : "3.7", "Params::Util" : "1.00", "perl" : "5.006" } } }, "release_status" : "stable", "resources" : { "license" : [ "http://dev.perl.org/licenses/" ], "repository" : { "url" : "http://svn.ali.as/cpan/trunk/SMS-Send" }, "x_ChangeLog" : "http://fisheye2.atlassian.com/changelog/cpan/trunk/SMS-Send" }, "version" : "1.06", "x_module_name" : "SMS::Send" } SMS-Send-1.06/xt/0000755000175100017510000000000011656364027012026 5ustar adamadamSMS-Send-1.06/xt/pmv.t0000644000175100017510000000125211656364000013004 0ustar adamadam#!/usr/bin/perl # Test that our declared minimum Perl version matches our syntax use strict; BEGIN { $| = 1; $^W = 1; } my @MODULES = ( 'Perl::MinimumVersion 1.27', 'Test::MinimumVersion 0.101080', ); # Don't run tests for installs use Test::More; unless ( $ENV{AUTOMATED_TESTING} or $ENV{RELEASE_TESTING} ) { plan( skip_all => "Author tests not required for installation" ); } # Load the testing modules foreach my $MODULE ( @MODULES ) { eval "use $MODULE"; if ( $@ ) { $ENV{RELEASE_TESTING} ? die( "Failed to load required release-testing module $MODULE" ) : plan( skip_all => "$MODULE not available for testing" ); } } all_minimum_version_from_metayml_ok(); SMS-Send-1.06/xt/meta.t0000644000175100017510000000107311656364000013131 0ustar adamadam#!/usr/bin/perl # Test that our META.yml file matches the current specification. use strict; BEGIN { $| = 1; $^W = 1; } my $MODULE = 'Test::CPAN::Meta 0.17'; # Don't run tests for installs use Test::More; unless ( $ENV{AUTOMATED_TESTING} or $ENV{RELEASE_TESTING} ) { plan( skip_all => "Author tests not required for installation" ); } # Load the testing module eval "use $MODULE"; if ( $@ ) { $ENV{RELEASE_TESTING} ? die( "Failed to load required release-testing module $MODULE" ) : plan( skip_all => "$MODULE not available for testing" ); } meta_yaml_ok(); SMS-Send-1.06/xt/pod.t0000644000175100017510000000116711656364000012771 0ustar adamadam#!/usr/bin/perl # Test that the syntax of our POD documentation is valid use strict; BEGIN { $| = 1; $^W = 1; } my @MODULES = ( 'Pod::Simple 3.14', 'Test::Pod 1.44', ); # Don't run tests for installs use Test::More; unless ( $ENV{AUTOMATED_TESTING} or $ENV{RELEASE_TESTING} ) { plan( skip_all => "Author tests not required for installation" ); } # Load the testing modules foreach my $MODULE ( @MODULES ) { eval "use $MODULE"; if ( $@ ) { $ENV{RELEASE_TESTING} ? die( "Failed to load required release-testing module $MODULE" ) : plan( skip_all => "$MODULE not available for testing" ); } } all_pod_files_ok(); SMS-Send-1.06/META.yml0000644000175100017510000000147411656364022012645 0ustar adamadam--- abstract: 'Driver-based API for sending SMS messages' author: - 'Adam Kennedy ' build_requires: ExtUtils::MakeMaker: 6.62 File::Spec: 0.80 Test::More: 0.47 configure_requires: ExtUtils::MakeMaker: 6.62 distribution_type: module dynamic_config: 0 generated_by: 'Module::Install version 1.04' license: perl meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html version: 1.4 module_name: SMS::Send name: SMS-Send no_index: directory: - inc - t - xt requires: Class::Adapter: 1.05 Class::Adapter::Builder: 1.05 Module::Pluggable: 3.7 Params::Util: 1.00 perl: 5.6.0 resources: ChangeLog: http://fisheye2.atlassian.com/changelog/cpan/trunk/SMS-Send license: http://dev.perl.org/licenses/ repository: http://svn.ali.as/cpan/trunk/SMS-Send version: 1.06 SMS-Send-1.06/lib/0000755000175100017510000000000011656364027012141 5ustar adamadamSMS-Send-1.06/lib/SMS/0000755000175100017510000000000011656364027012603 5ustar adamadamSMS-Send-1.06/lib/SMS/Send.pm0000644000175100017510000002225711656364000014031 0ustar adamadampackage SMS::Send; =pod =head1 NAME SMS::Send - Driver-based API for sending SMS messages =head1 SYNOPSIS # Create a sender my $sender = SMS::Send->new('SomeDriver', _login => 'myname', _password => 'mypassword', ); # Send a message my $sent = $sender->send_sms( text => 'This is a test message', to => '+61 (4) 1234 5678', ); # Did the send succeed. if ( $sent ) { print "Message sent ok\n"; } else { print "Failed to send message\n"; } =head1 DESCRIPTION C is intended to provide a driver-based single API for sending SMS and MMS messages. The intent is to provide a single API against which to write the code to send an SMS message. At the same time, the intent is to remove the limits of some of the previous attempts at this sort of API, like "must be free internet-based SMS services". C drivers are installed seperately, and might use the web, email or physical SMS hardware. It could be a free or paid. The details shouldn't matter. You should not have to care how it is actually sent, only that it has been sent (although some drivers may not be able to provide certainty). =head1 METHODS =cut use 5.006; use strict; use Carp (); use SMS::Send::Driver (); use Params::Util 0.14 (); # We are a type of Adapter use Class::Adapter::Builder 1.05 AUTOLOAD => 'PUBLIC'; # We need plugin support to find the drivers use Module::Pluggable 3.7 require => 0, inner => 0, search_path => [ 'SMS::Send' ], except => [ 'SMS::Send::Driver' ], sub_name => '_installed_drivers'; use vars qw{$VERSION}; BEGIN { $VERSION = '1.06'; } # Private driver cache my @DRIVERS = (); =pod =head2 installed_drivers The C the list of SMS::Send drivers that are installed on the current system. =cut sub installed_drivers { my $class = shift; unless ( @DRIVERS ) { my @rawlist = $class->_installed_drivers; foreach my $d ( @rawlist ) { $d =~ s/^SMS::Send:://; } @DRIVERS = @rawlist; } return @DRIVERS; } ##################################################################### # Constructor and Accessors =pod =head2 new # The most basic sender $sender = SMS::Send->new('Test'); # Indicate regional driver with :: $sender = SMS::Send->new('AU::Test'); # Pass arbitrary params to the driver $sender = SMS::Send->new('MyDriver', _login => 'adam', _password => 'adam', ); The C constructor creates a new SMS sender. It takes as its first parameter a driver name. These names map the class names. For example driver "Test" matches the testing driver L. Any additional params should be key/value pairs, split into two types. Params without a leading underscore are "public" options and relate to standardised features within the L API itself. At this time, there are no usable public options. Params B a leading underscore are "private" driver-specific options and will be passed through to the driver unchanged. Returns a new L object, or dies on error. =cut sub new { my $class = shift; my $driver = $class->_DRIVER(shift); my @params = Params::Util::_HASH0($_[0]) ? %{$_[0]} : @_; # Create the driver and verify my $object = $driver->new( $class->_PRIVATE(@params) ); unless ( Params::Util::_INSTANCE($object, 'SMS::Send::Driver') ) { Carp::croak("Driver Error: $driver->new did not return a driver object"); } # Hand off to create our object my $self = $class->SUPER::new( $object ); unless ( Params::Util::_INSTANCE($self, $class) ) { die "Internal Error: Failed to create a $class object"; } return $self; } =pod =head2 send_sms # Send a message to a particular address my $result = $sender->send_sms( text => 'This is a test message', to => '+61 4 1234 5678', ); The C method sends a standard text SMS message to a destination phone number. It takes a set of named parameters to describe the message and its destination, again split into two types. Params without a leading underscore are "public" options and relate to standardised features within the L API itself. =over =item text The C param is compulsory and should be a plain text string of non-zero length. The maximum length is currently determined by the driver, and exceeding this length will result in an exception being thrown if you breach it. Better functionality for determining the maximum-supported length is expected in the future. You input would be welcome. =item to The C param is compulsory, and should be an international phone number as indicated by a leading plus "+" character. Punctuation in any form is allowed, and will be stripped out before it is provided to the driver. If and only if your driver is a regional driver (as indicated by a ::-seperated name such as AU::Test) the C number can also be in a regional-specific dialing format, C a leading plus "+" character. Providing a regional number to a non-regional driver will throw an exception. =back Any parameters B a leading underscore are considered private driver-specific options and will be passed through without alteration. Any other parameters B a leading underscore will be silently stripped out and not passed through to the driver. After calling C the driver will do whatever is required to send the message, including (potentially, but not always) waiting for a confirmation from the network that the SMS has been sent. Given that drivers may do the actual mechanics of sending a message by quite a large variety of different methods the C method may potentially block for some time. Timeout functionality is expected to be added later. The C returns true if the message was sent, or the driver is fire-and-forget and unable to determine success, or false if the message was not sent. =cut sub send_sms { my $self = shift; my %params = @_; # Get the text content my $text = delete $params{text}; unless ( _STRING($text) ) { Carp::croak("Did not provide a 'text' string param"); } # Get the destination number my $to = delete $params{to}; unless ( _STRING($to) ) { Carp::croak("Did not provide a 'to' message destination"); } # Clean up the number $to =~ s/[\s\(\)\[\]\{\}\.-]//g; unless ( _STRING($to) ) { Carp::croak("Did not provide a 'to' message destination"); } unless ( $to =~ /^\+?\d+$/ ) { Carp::croak("Invalid phone number format '$params{to}'"); } # Extra validations of international or non-international issues if ( $to =~ /^\+0/ ) { Carp::croak("International phone numbers cannot have leading zeros"); } if ( $to =~ /^\+/ and length($to) <= 7 ) { Carp::croak("International phone numbers must be at least 6 digits"); } unless ( ref($self->_OBJECT_) =~ /^SMS::Send::\w+::/ ) { # International-only driver unless ( $to =~ /^\+/ ) { Carp::croak("Cannot use regional phone numbers with an international driver"); } } # Merge params and hand off my $rv = $self->_OBJECT_->send_sms( text => $text, to => $to, $self->_PRIVATE(@_), ); # Verify we get some sort of result unless ( defined $rv ) { Carp::croak("Driver did not return a result"); } return $rv; } ##################################################################### # Support Methods sub _STRING { !! (defined $_[0] and ! ref $_[0] and length $_[0]); } sub _DRIVER { my $class = shift; # The driver should be a string (other than 'Driver') my $name = $_[0]; unless ( defined $name and ! ref $name and length $name ) { Carp::croak("Did not provide a SMS::Send driver name"); } if ( $name =~ /^\d+$/ ) { # Although pure-digit Foo::123 class names are technically # allowed, we don't allow them as drivers, to reduce insanity. Carp::croak("Not a valid SMS::Send driver name"); } # Clean up the driver name my $driver = "SMS::Send::$name"; unless ( Params::Util::_CLASS($driver) ) { Carp::croak("Not a valid SMS::Send driver name"); } # Load the driver eval "require $driver;"; if ( $@ and $@ =~ /^Can't locate / ) { # Driver does not exist Carp::croak("SMS::Send driver $_[0] does not exist, or is not installed"); } elsif ( $@ ) { # Fatal error within the driver itself # Pass on without change Carp::croak( $@ ); } # Verify that the class is actually a driver unless ( $driver->isa('SMS::Send::Driver') and $driver ne 'SMS::Send::Driver' ) { Carp::croak("$driver is not a subclass of SMS::Send::Driver"); } return $driver; } # Filter params for only the private params sub _PRIVATE { my $class = ref $_[0] ? ref shift : shift; my @input = @_; my @output = (); while ( @input ) { my $key = shift @input; my $value = shift @input; if ( _STRING($key) and $key =~ /^_/ ) { push @output, $key, $value; } } return @output; } 1; =pod =head1 SUPPORT Bugs should be reported via the CPAN bug tracker at L For other issues, contact the author. =head1 AUTHOR Adam Kennedy Eadamk@cpan.orgE =head1 COPYRIGHT Copyright 2005 - 2011 Adam Kennedy. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included with this module. =cut SMS-Send-1.06/lib/SMS/Send/0000755000175100017510000000000011656364027013474 5ustar adamadamSMS-Send-1.06/lib/SMS/Send/Driver.pm0000644000175100017510000000453711656364000015265 0ustar adamadampackage SMS::Send::Driver; =pod =head1 NAME SMS::Send::Driver - Base class for SMS::Send drivers =head1 DESCRIPTION The C class provides an abstract base class for all L driver classes. At this time it does not provide any implementation code for drivers (although this may change in the future) with the exception of some methods provided to trigger "does not implement method" errors. However, it does serve as something you should sub-class your driver from to identify it as a L driver. Please note that if your driver class not B return true for C<$driver->isa('SMS::Send::Driver')> then the L constructor will refuse to use your class as a driver. =head1 METHODS =cut use 5.006; use strict; use Carp (); use vars qw{$VERSION}; BEGIN { $VERSION = '0.06'; } =pod =head2 new The C constructor is required to be implemented by your driver subclass. It recieves a set of arbitrary paired params. The values of these params are assumed to be driver-specific (this is expected to change). If your driver will need to login to some system, locate hardware, or do some other form of initialisation to validate the SMS delivery mechanism exists, it should do so in C. Should return a new L-subclass object, or die on error. =cut sub new { my $class = shift; Carp::croak("Driver Error: $class does not implement the 'new' constructor"); } =pod =head2 send_sms The C method is required to be implemented by your driver subclass. It recieves a set of param pairs as documented in L. Should return true for either success or fire-and-forget with unknown result, defined-but-false ('' or 0) for a failed message send, or die on a fatal error. =cut sub send_sms { my $class = ref($_[0]) || $_[0]; Carp::croak("Driver Error: $class does not implement the 'send_sms' method"); } 1; =pod =head1 SUPPORT Bugs should be reported via the CPAN bug tracker at L For other issues, contact the author. =head1 AUTHOR Adam Kennedy Eadamk@cpan.orgE =head1 COPYRIGHT Copyright 2005 - 2011 Adam Kennedy. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included with this module. =cut SMS-Send-1.06/lib/SMS/Send/Test.pm0000644000175100017510000000540211656364000014741 0ustar adamadampackage SMS::Send::Test; =pod =head1 NAME SMS::Send::Test - SMS::Send International-Class Testing Driver =head1 SYNOPSIS # Create a testing sender my $send = SMS::Send->new( 'Test' ); # Clear the message trap $send->clear; # Send a message $send->send_sms( text => 'Hi there', to => '+61 (4) 1234 5678', ); # Get the message from the trap my @messages = $send->messages; =head1 DESCRIPTION L supports two classes of drivers. An international class named in the format C, which only accept international numbers in C<+1 XXX XXXXX> format, and regional-context drivers in the format C which will also accept a non-leading-plus number in the format applicable within that region (in the above case, Australia). L is the testing driver for the international class of drivers. Except for the name, it is otherwise identical to L. Its two roles are firstly to always exist (be installed) and secondly to act as a "trap" for messages. Messages sent via SMS::Send::Test always succeed, and the messages can be recovered for testing after sending. Note that the trap is done on a per-driver-handle basis, and is not shared between multiple driver handles. =cut use 5.006; use strict; use SMS::Send::Driver (); use vars qw{$VERSION @ISA}; BEGIN { $VERSION = '0.06'; @ISA = 'SMS::Send::Driver'; } ##################################################################### # Constructor sub new { my $class = shift; # Create the object my $self = bless { messages => [ ], }, $class; $self; } sub send_sms { my $self = shift; my $messages = $self->{messages}; push @$messages, [ @_ ]; return 1; } =pod =head1 METHODS SMS::Send::Test inherits all the methods of the parent L class, and adds the following. =head2 messages The C method retrieves as a list all of the messages in the message trap. =cut sub messages { my $self = shift; return @{$self->{messages}}; } =pod =head2 clear The C method clears the message trap. This should be done before each chunk of test code to ensure you are starting from a known state. Returns true as a convenience. =cut sub clear { my $self = shift; $self->{messages} = []; return 1; } 1; =pod =head1 SUPPORT Bugs should be reported via the CPAN bug tracker at L For other issues, contact the author. =head1 AUTHOR Adam Kennedy Eadamk@cpan.orgE =head1 COPYRIGHT Copyright 2005 - 2011 Adam Kennedy. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included with this module. =cut SMS-Send-1.06/lib/SMS/Send/AU/0000755000175100017510000000000011656364027014001 5ustar adamadamSMS-Send-1.06/lib/SMS/Send/AU/Test.pm0000644000175100017510000000540611656364000015252 0ustar adamadampackage SMS::Send::AU::Test; =pod =head1 NAME SMS::Send::AU::Test - SMS::Send Regional-Class Testing Driver =head1 SYNOPSIS # Create a testing sender my $send = SMS::Send->new( 'AU-Test' ); # Clear the message trap $send->clear; # Send a message $send->send_sms( text => 'Hi there', to => '+61 (4) 1234 5678', ); # Get the message from the trap my @messages = $send->messages; =head1 DESCRIPTION L supports two classes of drivers. An international class named in the format C, which only accept international numbers in C<+1 XXX XXXXX> format, and regional-context drivers in the format C which will also accept a non-leading-plus number in the format applicable within that region (in the above case, Australia). L is the testing driver for the regional class of drivers. Except for the name, it is otherwise identical to L. Its two roles are firstly to always exist (be installed) and secondly to act as a "trap" for messages. Messages sent via SMS::Send::AU::Test always succeed, and the messages can be recovered for testing after sending. Note that the trap is done on a per-driver-handle basis, and is not shared between multiple driver handles. =cut use 5.006; use strict; use SMS::Send::Driver (); use vars qw{$VERSION @ISA}; BEGIN { $VERSION = '0.06'; @ISA = 'SMS::Send::Driver'; } ##################################################################### # Constructor sub new { my $class = shift; # Create the object my $self = bless { messages => [], }, $class; $self; } sub send_sms { my $self = shift; my $messages = $self->{messages}; push @$messages, [ @_ ]; return 1; } =pod =head1 METHODS SMS::Send::AU::Test inherits all the methods of the parent L class, and adds the following. =head2 messages The C method retrieves as a list all of the messages in the message trap. =cut sub messages { my $self = shift; return @{$self->{messages}}; } =pod =head2 clear The C method clears the message trap. This should be done before each chunk of test code to ensure you are starting from a known state. Returns true as a convenience. =cut sub clear { my $self = shift; $self->{messages} = [ ]; return 1; } 1; =pod =head1 SUPPORT Bugs should be reported via the CPAN bug tracker at L For other issues, contact the author. =head1 AUTHOR Adam Kennedy Eadamk@cpan.orgE =head1 COPYRIGHT Copyright 2005 - 2011 Adam Kennedy. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included with this module. =cut SMS-Send-1.06/MANIFEST0000644000175100017510000000114611656364022012521 0ustar adamadamChanges inc/Module/Install.pm inc/Module/Install/Base.pm inc/Module/Install/Can.pm inc/Module/Install/DSL.pm inc/Module/Install/Fetch.pm inc/Module/Install/Makefile.pm inc/Module/Install/Metadata.pm inc/Module/Install/Win32.pm inc/Module/Install/WriteAll.pm lib/SMS/Send.pm lib/SMS/Send/AU/Test.pm lib/SMS/Send/Driver.pm lib/SMS/Send/Test.pm LICENSE Makefile.PL MANIFEST This list of files META.yml MYMETA.json README t/01_compile.t t/02_basic.t t/03_new.t t/04_send.t t/lib/SMS/Send/BAD1.pm t/lib/SMS/Send/BAD2.pm t/lib/SMS/Send/BAD3.pm t/lib/SMS/Send/BAD4.pm t/lib/SMS/Send/BAD5.pm xt/meta.t xt/pmv.t xt/pod.t SMS-Send-1.06/t/0000755000175100017510000000000011656364027011636 5ustar adamadamSMS-Send-1.06/t/03_new.t0000644000175100017510000000531211656364000013106 0ustar adamadam#!/usr/bin/perl # Test the creation of a new SMS::Send object use strict; BEGIN { $| = 1; $^W = 1; } use Test::More tests => 25; use SMS::Send; use File::Spec::Functions ':ALL'; use Params::Util '_INSTANCE'; sub dies_like { my $code = shift; my $regexp = _INSTANCE(shift, 'Regexp') or die "Did not provide regexp to dies_like"; eval { &$code() }; like( $@, $regexp, $_[0] || "Dies as expected with message like $regexp" ); } ##################################################################### # Good Creation # Create a new test sender SCOPE: { my $sender1 = SMS::Send->new( 'Test' ); isa_ok( $sender1, 'SMS::Send' ); is( $sender1->clear, 1, 'Methods pass through to the driver' ); my $sender2 = SMS::Send->new( 'AU::Test' ); isa_ok( $sender2, 'SMS::Send' ); is( $sender2->clear, 1, 'Methods pass through to the driver' ); } ##################################################################### # Bad Creation # SMS::Send provides a fair bit of protection, so that driver authors # don't have to quite so much. my $RE_NONAME = qr/Did not provide a SMS::Send driver name/; dies_like( sub { SMS::Send->new }, $RE_NONAME ); dies_like( sub { SMS::Send->new('') }, $RE_NONAME ); dies_like( sub { SMS::Send->new(undef) }, $RE_NONAME ); dies_like( sub { SMS::Send->new(\"") }, $RE_NONAME ); dies_like( sub { SMS::Send->new([]) }, $RE_NONAME ); dies_like( sub { SMS::Send->new({}) }, $RE_NONAME ); my $RE_INVALID = qr/Not a valid SMS::Send driver name/; dies_like( sub { SMS::Send->new(' ') }, $RE_INVALID ); dies_like( sub { SMS::Send->new(' FOO') }, $RE_INVALID ); dies_like( sub { SMS::Send->new('Foo ') }, $RE_INVALID ); dies_like( sub { SMS::Send->new(1) }, $RE_INVALID ); dies_like( sub { SMS::Send->new("Foo'Bar") }, $RE_INVALID ); my $RE_NOEXIST = qr/does not exist, or is not installed/; dies_like( sub { SMS::Send->new("Does::Not::Exist") }, $RE_NOEXIST ); dies_like( sub { SMS::Send->new("FOOOOOOO") }, $RE_NOEXIST ); SCOPE: { local @INC = ( catdir('t', 'lib'), @INC ); dies_like( sub { SMS::Send->new('BAD1') }, qr/A SPECIFIC ERROR/ ); my $RE_NOTDRIVER = qr/is not a subclass of SMS::Send::Driver/; dies_like( sub { SMS::Send->new('BAD2') }, $RE_NOTDRIVER ); dies_like( sub { SMS::Send->new('Driver') }, $RE_NOTDRIVER ); # Check when the driver dies dies_like( sub { SMS::Send->new('BAD3') }, qr/new dies as expected/, ); dies_like( sub { SMS::Send->new('BAD4') }, qr/^Driver Error:/, ); dies_like( sub { SMS::Send->new('BAD4') }, qr/does not implement the 'new' constructor/, ); dies_like( sub { SMS::Send->new('BAD5') }, qr/^Driver Error:/, ); dies_like( sub { SMS::Send->new('BAD5') }, qr/did not return a driver object/, ); } SMS-Send-1.06/t/02_basic.t0000644000175100017510000000142611656364000013377 0ustar adamadam#!/usr/bin/perl # Test the basic loading, initialisation, etc for SMS::Send. # Don't actually send anything yet. use strict; BEGIN { $| = 1; $^W = 1; } use Test::More tests => 4; use SMS::Send; use Params::Util ':ALL'; ##################################################################### # Driver Detection # Check for available drivers my @drivers = SMS::Send->installed_drivers; # Should contain our two test drivers ok( scalar(@drivers) >= 2, 'Found at least 2 drivers' ); ok( scalar(grep { $_ eq 'Test' } @drivers) == 1, 'Found "Test" driver' ); ok( scalar(grep { $_ eq 'AU::Test' } @drivers) == 1, 'Found "AU::Test" driver' ); # In detecting these drivers, they should NOT be loaded ok( ! defined $SMS::Send::Test::VERSION, 'Did not load drivers when locating them' ); SMS-Send-1.06/t/04_send.t0000644000175100017510000000470111656364000013250 0ustar adamadam#!/usr/bin/perl # Test the sending of a message use strict; BEGIN { $| = 1; $^W = 1; } use Test::More tests => 17; use SMS::Send; use Params::Util '_INSTANCE'; sub dies_like { my $code = shift; my $regexp = _INSTANCE(shift, 'Regexp') or die "Did not provide regexp to dies_like"; eval { &$code() }; like( $@, $regexp, $_[0] || "Dies as expected with message like $regexp" ); } ##################################################################### # Good Send # Create a new test sender SCOPE: { my $sender1 = SMS::Send->new( 'Test' ); isa_ok( $sender1, 'SMS::Send' ); is( $sender1->clear, 1, 'Methods pass through to the driver' ); # Send the message my $rv = $sender1->send_sms( text => 'This is a test', to => '+61 (4) 1234 5678', ignore => 'asdf', _private => 'value', ); is( $rv, 1, '->send_sms returns true' ); # Get the sent message my @messages = $sender1->messages; is_deeply( \@messages, [ [ text => 'This is a test', to => '+61412345678', _private => 'value', ] ], 'Message gets send as expected' ); } ##################################################################### # Bad Sending my $sender = SMS::Send->new( 'Test' ); isa_ok( $sender, 'SMS::Send' ); is( $sender->clear, 1, 'Methods pass through to the driver' ); dies_like( sub { $sender->send_sms() }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => undef ) }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => '' ) }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => \'' ) }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => [] ) }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => {} ) }, qr/Did not provide a 'text' string param/, ); dies_like( sub { $sender->send_sms( text => 'foo' ) }, qr/Did not provide a 'to' message destination/, ); dies_like( sub { $sender->send_sms( text => 'foo', to => undef ) }, qr/Did not provide a 'to' message destination/, ); dies_like( sub { $sender->send_sms( text => 'foo', to => '' ) }, qr/Did not provide a 'to' message destination/, ); dies_like( sub { $sender->send_sms( text => 'foo', to => ' ' ) }, qr/Did not provide a 'to' message destination/, ); dies_like( sub { $sender->send_sms( text => 'foo', to => '()' ) }, qr/Did not provide a 'to' message destination/, ); SMS-Send-1.06/t/01_compile.t0000644000175100017510000000040111656364000013735 0ustar adamadam#!/usr/bin/perl # Compile-testing for File::HomeDir use strict; BEGIN { $| = 1; $^W = 1; } use Test::More tests => 4; use_ok( 'SMS::Send' ); use_ok( 'SMS::Send::Driver' ); use_ok( 'SMS::Send::Test' ); use_ok( 'SMS::Send::AU::Test' ); SMS-Send-1.06/t/lib/0000755000175100017510000000000011656364027012404 5ustar adamadamSMS-Send-1.06/t/lib/SMS/0000755000175100017510000000000011656364027013046 5ustar adamadamSMS-Send-1.06/t/lib/SMS/Send/0000755000175100017510000000000011656364027013737 5ustar adamadamSMS-Send-1.06/t/lib/SMS/Send/BAD5.pm0000644000175100017510000000035311656364000014740 0ustar adamadampackage SMS::Send::BAD5; use strict; use SMS::Send::Driver (); use vars qw{$VERSION @ISA}; BEGIN { $VERSION = '0.01'; @ISA = 'SMS::Send::Driver'; } # Return something other than a driver object sub new { bless {}, 'Foo' } 1; SMS-Send-1.06/t/lib/SMS/Send/BAD2.pm0000644000175100017510000000017511656364000014737 0ustar adamadampackage SMS::Send::BAD2; use strict; use vars qw{$VERSION}; BEGIN { $VERSION = '0.01'; } sub new { bless {}, shift } 1; SMS-Send-1.06/t/lib/SMS/Send/BAD3.pm0000644000175100017510000000031211656364000014731 0ustar adamadampackage SMS::Send::BAD3; use strict; use SMS::Send::Driver (); use vars qw{$VERSION @ISA}; BEGIN { $VERSION = '0.01'; @ISA = 'SMS::Send::Driver'; } sub new { die "new dies as expected"; } 1; SMS-Send-1.06/t/lib/SMS/Send/BAD1.pm0000644000175100017510000000020411656364000014727 0ustar adamadampackage SMS::Send::BAD1; use strict; use vars qw{$VERSION}; BEGIN { $VERSION = '0.01'; } die "Dying with A SPECIFIC ERROR"; 1; SMS-Send-1.06/t/lib/SMS/Send/BAD4.pm0000644000175100017510000000024011656364000014732 0ustar adamadampackage SMS::Send::BAD4; use strict; use SMS::Send::Driver (); use vars qw{$VERSION @ISA}; BEGIN { $VERSION = '0.01'; @ISA = 'SMS::Send::Driver'; } 1; SMS-Send-1.06/Changes0000644000175100017510000000222511656364000012656 0ustar adamadamRevision history for Perl extension SMS::Send 1.06 Wed 9 Nov 2011 - No functional changes - Moved to production version - Updating to Module::Install::DSL 1.04 - New Perl back-compatibility target of 5.6 - Made the Perl back-compat target explicit - Bumping a variety of dependencies to pick up bug fixes - Don't import from Params::Util - Various whitespace/tabbing fixes - Removed the use of base.pm - Updated bundled author tests and moved to xt 0.05 Wed 14 Nov 2007 - No functional changes - Updating to Module::Install 0.68 0.04 Mon 2 Oct 2006 - Upgraded to Module::Install 0.64 - Some minor kwalitee nigglies fixed 0.03 Fri May 12 2005 - Upgraded to Module::Install 0.62 - Removed auto_install - Improvements to Params::Util::_CLASS made a case that previous errored, now pass. Fixed and updated Params::Util dep. 0.02 Tue Dec 27 2005 - Fixed various bugs - Added the public/private param scheme to ->new as well. - Added more tests for error conditions - Other teensy changes to support for first real live driver. 0.01 Mon Dec 26 2005 - Completed the first implementation - Contains no drivers other than test drivers intentionally SMS-Send-1.06/inc/0000755000175100017510000000000011656364027012144 5ustar adamadamSMS-Send-1.06/inc/Module/0000755000175100017510000000000011656364027013371 5ustar adamadamSMS-Send-1.06/inc/Module/Install/0000755000175100017510000000000011656364027014777 5ustar adamadamSMS-Send-1.06/inc/Module/Install/DSL.pm0000644000175100017510000000457011656364022015760 0ustar adamadam#line 1 package Module::Install::DSL; use strict; use vars qw{$VERSION $ISCORE}; BEGIN { $VERSION = '1.04'; $ISCORE = 1; *inc::Module::Install::DSL::VERSION = *VERSION; @inc::Module::Install::DSL::ISA = __PACKAGE__; } sub import { # Read in the rest of the Makefile.PL open 0 or die "Couldn't open $0: $!"; my $dsl; SCOPE: { local $/ = undef; $dsl = join "", <0>; } # Change inc::Module::Install::DSL to the regular one. # Remove anything before the use inc::... line. $dsl =~ s/.*?^\s*use\s+(?:inc::)?Module::Install::DSL(\b[^;]*);\s*\n//sm; # Load inc::Module::Install as we would in a regular Makefile.Pl SCOPE: { package main; require inc::Module::Install; inc::Module::Install->import; } # Add the ::DSL plugin to the list of packages in /inc my $admin = $Module::Install::MAIN->{admin}; if ( $admin ) { my $from = $INC{"$admin->{path}/DSL.pm"}; my $to = "$admin->{base}/$admin->{prefix}/$admin->{path}/DSL.pm"; $admin->copy( $from => $to ); } # Convert the basic syntax to code my $code = "INIT {\n" . "package main;\n\n" . dsl2code($dsl) . "\n\nWriteAll();\n" . "}\n"; # Execute the script eval $code; print STDERR "Failed to execute the generated code...\n$@" if $@; exit(0); } sub dsl2code { my $dsl = shift; # Split into lines and strip blanks my @lines = grep { /\S/ } split /[\012\015]+/, $dsl; # Each line represents one command my @code = (); my $static = 1; foreach my $line ( @lines ) { # Split the lines into tokens my @tokens = split /\s+/, $line; # The first word is the command my $command = shift @tokens; my @params = (); my @suffix = (); while ( @tokens ) { my $token = shift @tokens; if ( $token eq 'if' or $token eq 'unless' ) { # This is the beginning of a suffix push @suffix, $token; push @suffix, @tokens; # The conditional means this distribution # can no longer be considered fully static. $static = 0; last; } else { # Convert to a string $token =~ s/([\\\'])/\\$1/g; push @params, "'$token'"; } }; # Merge to create the final line of code @tokens = ( $command, @params ? join( ', ', @params ) : (), @suffix ); push @code, join( ' ', @tokens ) . ";\n"; } # Is our configuration static? push @code, "static_config;\n" if $static; # Join into the complete code block return join( '', @code ); } 1; SMS-Send-1.06/inc/Module/Install/Can.pm0000644000175100017510000000333311656364022016033 0ustar adamadam#line 1 package Module::Install::Can; use strict; use Config (); use File::Spec (); use ExtUtils::MakeMaker (); use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } # check if we can load some module ### Upgrade this to not have to load the module if possible sub can_use { my ($self, $mod, $ver) = @_; $mod =~ s{::|\\}{/}g; $mod .= '.pm' unless $mod =~ /\.pm$/i; my $pkg = $mod; $pkg =~ s{/}{::}g; $pkg =~ s{\.pm$}{}i; local $@; eval { require $mod; $pkg->VERSION($ver || 0); 1 }; } # check if we can run some command sub can_run { my ($self, $cmd) = @_; my $_cmd = $cmd; return $_cmd if (-x $_cmd or $_cmd = MM->maybe_command($_cmd)); for my $dir ((split /$Config::Config{path_sep}/, $ENV{PATH}), '.') { next if $dir eq ''; my $abs = File::Spec->catfile($dir, $_[1]); return $abs if (-x $abs or $abs = MM->maybe_command($abs)); } return; } # can we locate a (the) C compiler sub can_cc { my $self = shift; my @chunks = split(/ /, $Config::Config{cc}) or return; # $Config{cc} may contain args; try to find out the program part while (@chunks) { return $self->can_run("@chunks") || (pop(@chunks), next); } return; } # Fix Cygwin bug on maybe_command(); if ( $^O eq 'cygwin' ) { require ExtUtils::MM_Cygwin; require ExtUtils::MM_Win32; if ( ! defined(&ExtUtils::MM_Cygwin::maybe_command) ) { *ExtUtils::MM_Cygwin::maybe_command = sub { my ($self, $file) = @_; if ($file =~ m{^/cygdrive/}i and ExtUtils::MM_Win32->can('maybe_command')) { ExtUtils::MM_Win32->maybe_command($file); } else { ExtUtils::MM_Unix->maybe_command($file); } } } } 1; __END__ #line 156 SMS-Send-1.06/inc/Module/Install/Base.pm0000644000175100017510000000214711656364022016206 0ustar adamadam#line 1 package Module::Install::Base; use strict 'vars'; use vars qw{$VERSION}; BEGIN { $VERSION = '1.04'; } # Suspend handler for "redefined" warnings BEGIN { my $w = $SIG{__WARN__}; $SIG{__WARN__} = sub { $w }; } #line 42 sub new { my $class = shift; unless ( defined &{"${class}::call"} ) { *{"${class}::call"} = sub { shift->_top->call(@_) }; } unless ( defined &{"${class}::load"} ) { *{"${class}::load"} = sub { shift->_top->load(@_) }; } bless { @_ }, $class; } #line 61 sub AUTOLOAD { local $@; my $func = eval { shift->_top->autoload } or return; goto &$func; } #line 75 sub _top { $_[0]->{_top}; } #line 90 sub admin { $_[0]->_top->{admin} or Module::Install::Base::FakeAdmin->new; } #line 106 sub is_admin { ! $_[0]->admin->isa('Module::Install::Base::FakeAdmin'); } sub DESTROY {} package Module::Install::Base::FakeAdmin; use vars qw{$VERSION}; BEGIN { $VERSION = $Module::Install::Base::VERSION; } my $fake; sub new { $fake ||= bless(\@_, $_[0]); } sub AUTOLOAD {} sub DESTROY {} # Restore warning handler BEGIN { $SIG{__WARN__} = $SIG{__WARN__}->(); } 1; #line 159 SMS-Send-1.06/inc/Module/Install/Fetch.pm0000644000175100017510000000462711656364022016372 0ustar adamadam#line 1 package Module::Install::Fetch; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } sub get_file { my ($self, %args) = @_; my ($scheme, $host, $path, $file) = $args{url} =~ m|^(\w+)://([^/]+)(.+)/(.+)| or return; if ( $scheme eq 'http' and ! eval { require LWP::Simple; 1 } ) { $args{url} = $args{ftp_url} or (warn("LWP support unavailable!\n"), return); ($scheme, $host, $path, $file) = $args{url} =~ m|^(\w+)://([^/]+)(.+)/(.+)| or return; } $|++; print "Fetching '$file' from $host... "; unless (eval { require Socket; Socket::inet_aton($host) }) { warn "'$host' resolve failed!\n"; return; } return unless $scheme eq 'ftp' or $scheme eq 'http'; require Cwd; my $dir = Cwd::getcwd(); chdir $args{local_dir} or return if exists $args{local_dir}; if (eval { require LWP::Simple; 1 }) { LWP::Simple::mirror($args{url}, $file); } elsif (eval { require Net::FTP; 1 }) { eval { # use Net::FTP to get past firewall my $ftp = Net::FTP->new($host, Passive => 1, Timeout => 600); $ftp->login("anonymous", 'anonymous@example.com'); $ftp->cwd($path); $ftp->binary; $ftp->get($file) or (warn("$!\n"), return); $ftp->quit; } } elsif (my $ftp = $self->can_run('ftp')) { eval { # no Net::FTP, fallback to ftp.exe require FileHandle; my $fh = FileHandle->new; local $SIG{CHLD} = 'IGNORE'; unless ($fh->open("|$ftp -n")) { warn "Couldn't open ftp: $!\n"; chdir $dir; return; } my @dialog = split(/\n/, <<"END_FTP"); open $host user anonymous anonymous\@example.com cd $path binary get $file $file quit END_FTP foreach (@dialog) { $fh->print("$_\n") } $fh->close; } } else { warn "No working 'ftp' program available!\n"; chdir $dir; return; } unless (-f $file) { warn "Fetching failed: $@\n"; chdir $dir; return; } return if exists $args{size} and -s $file != $args{size}; system($args{run}) if exists $args{run}; unlink($file) if $args{remove}; print(((!exists $args{check_for} or -e $args{check_for}) ? "done!" : "failed! ($!)"), "\n"); chdir $dir; return !$?; } 1; SMS-Send-1.06/inc/Module/Install/Win32.pm0000644000175100017510000000340311656364022016232 0ustar adamadam#line 1 package Module::Install::Win32; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } # determine if the user needs nmake, and download it if needed sub check_nmake { my $self = shift; $self->load('can_run'); $self->load('get_file'); require Config; return unless ( $^O eq 'MSWin32' and $Config::Config{make} and $Config::Config{make} =~ /^nmake\b/i and ! $self->can_run('nmake') ); print "The required 'nmake' executable not found, fetching it...\n"; require File::Basename; my $rv = $self->get_file( url => 'http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/Nmake15.exe', ftp_url => 'ftp://ftp.microsoft.com/Softlib/MSLFILES/Nmake15.exe', local_dir => File::Basename::dirname($^X), size => 51928, run => 'Nmake15.exe /o > nul', check_for => 'Nmake.exe', remove => 1, ); die <<'END_MESSAGE' unless $rv; ------------------------------------------------------------------------------- Since you are using Microsoft Windows, you will need the 'nmake' utility before installation. It's available at: http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/Nmake15.exe or ftp://ftp.microsoft.com/Softlib/MSLFILES/Nmake15.exe Please download the file manually, save it to a directory in %PATH% (e.g. C:\WINDOWS\COMMAND\), then launch the MS-DOS command line shell, "cd" to that directory, and run "Nmake15.exe" from there; that will create the 'nmake.exe' file needed by this module. You may then resume the installation process described in README. ------------------------------------------------------------------------------- END_MESSAGE } 1; SMS-Send-1.06/inc/Module/Install/WriteAll.pm0000644000175100017510000000237611656364022017063 0ustar adamadam#line 1 package Module::Install::WriteAll; use strict; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = qw{Module::Install::Base}; $ISCORE = 1; } sub WriteAll { my $self = shift; my %args = ( meta => 1, sign => 0, inline => 0, check_nmake => 1, @_, ); $self->sign(1) if $args{sign}; $self->admin->WriteAll(%args) if $self->is_admin; $self->check_nmake if $args{check_nmake}; unless ( $self->makemaker_args->{PL_FILES} ) { # XXX: This still may be a bit over-defensive... unless ($self->makemaker(6.25)) { $self->makemaker_args( PL_FILES => {} ) if -f 'Build.PL'; } } # Until ExtUtils::MakeMaker support MYMETA.yml, make sure # we clean it up properly ourself. $self->realclean_files('MYMETA.yml'); if ( $args{inline} ) { $self->Inline->write; } else { $self->Makefile->write; } # The Makefile write process adds a couple of dependencies, # so write the META.yml files after the Makefile. if ( $args{meta} ) { $self->Meta->write; } # Experimental support for MYMETA if ( $ENV{X_MYMETA} ) { if ( $ENV{X_MYMETA} eq 'JSON' ) { $self->Meta->write_mymeta_json; } else { $self->Meta->write_mymeta_yaml; } } return 1; } 1; SMS-Send-1.06/inc/Module/Install/Metadata.pm0000644000175100017510000004327711656364022017065 0ustar adamadam#line 1 package Module::Install::Metadata; use strict 'vars'; use Module::Install::Base (); use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } my @boolean_keys = qw{ sign }; my @scalar_keys = qw{ name module_name abstract version distribution_type tests installdirs }; my @tuple_keys = qw{ configure_requires build_requires requires recommends bundles resources }; my @resource_keys = qw{ homepage bugtracker repository }; my @array_keys = qw{ keywords author }; *authors = \&author; sub Meta { shift } sub Meta_BooleanKeys { @boolean_keys } sub Meta_ScalarKeys { @scalar_keys } sub Meta_TupleKeys { @tuple_keys } sub Meta_ResourceKeys { @resource_keys } sub Meta_ArrayKeys { @array_keys } foreach my $key ( @boolean_keys ) { *$key = sub { my $self = shift; if ( defined wantarray and not @_ ) { return $self->{values}->{$key}; } $self->{values}->{$key} = ( @_ ? $_[0] : 1 ); return $self; }; } foreach my $key ( @scalar_keys ) { *$key = sub { my $self = shift; return $self->{values}->{$key} if defined wantarray and !@_; $self->{values}->{$key} = shift; return $self; }; } foreach my $key ( @array_keys ) { *$key = sub { my $self = shift; return $self->{values}->{$key} if defined wantarray and !@_; $self->{values}->{$key} ||= []; push @{$self->{values}->{$key}}, @_; return $self; }; } foreach my $key ( @resource_keys ) { *$key = sub { my $self = shift; unless ( @_ ) { return () unless $self->{values}->{resources}; return map { $_->[1] } grep { $_->[0] eq $key } @{ $self->{values}->{resources} }; } return $self->{values}->{resources}->{$key} unless @_; my $uri = shift or die( "Did not provide a value to $key()" ); $self->resources( $key => $uri ); return 1; }; } foreach my $key ( grep { $_ ne "resources" } @tuple_keys) { *$key = sub { my $self = shift; return $self->{values}->{$key} unless @_; my @added; while ( @_ ) { my $module = shift or last; my $version = shift || 0; push @added, [ $module, $version ]; } push @{ $self->{values}->{$key} }, @added; return map {@$_} @added; }; } # Resource handling my %lc_resource = map { $_ => 1 } qw{ homepage license bugtracker repository }; sub resources { my $self = shift; while ( @_ ) { my $name = shift or last; my $value = shift or next; if ( $name eq lc $name and ! $lc_resource{$name} ) { die("Unsupported reserved lowercase resource '$name'"); } $self->{values}->{resources} ||= []; push @{ $self->{values}->{resources} }, [ $name, $value ]; } $self->{values}->{resources}; } # Aliases for build_requires that will have alternative # meanings in some future version of META.yml. sub test_requires { shift->build_requires(@_) } sub install_requires { shift->build_requires(@_) } # Aliases for installdirs options sub install_as_core { $_[0]->installdirs('perl') } sub install_as_cpan { $_[0]->installdirs('site') } sub install_as_site { $_[0]->installdirs('site') } sub install_as_vendor { $_[0]->installdirs('vendor') } sub dynamic_config { my $self = shift; my $value = @_ ? shift : 1; if ( $self->{values}->{dynamic_config} ) { # Once dynamic we never change to static, for safety return 0; } $self->{values}->{dynamic_config} = $value ? 1 : 0; return 1; } # Convenience command sub static_config { shift->dynamic_config(0); } sub perl_version { my $self = shift; return $self->{values}->{perl_version} unless @_; my $version = shift or die( "Did not provide a value to perl_version()" ); # Normalize the version $version = $self->_perl_version($version); # We don't support the really old versions unless ( $version >= 5.005 ) { die "Module::Install only supports 5.005 or newer (use ExtUtils::MakeMaker)\n"; } $self->{values}->{perl_version} = $version; } sub all_from { my ( $self, $file ) = @_; unless ( defined($file) ) { my $name = $self->name or die( "all_from called with no args without setting name() first" ); $file = join('/', 'lib', split(/-/, $name)) . '.pm'; $file =~ s{.*/}{} unless -e $file; unless ( -e $file ) { die("all_from cannot find $file from $name"); } } unless ( -f $file ) { die("The path '$file' does not exist, or is not a file"); } $self->{values}{all_from} = $file; # Some methods pull from POD instead of code. # If there is a matching .pod, use that instead my $pod = $file; $pod =~ s/\.pm$/.pod/i; $pod = $file unless -e $pod; # Pull the different values $self->name_from($file) unless $self->name; $self->version_from($file) unless $self->version; $self->perl_version_from($file) unless $self->perl_version; $self->author_from($pod) unless @{$self->author || []}; $self->license_from($pod) unless $self->license; $self->abstract_from($pod) unless $self->abstract; return 1; } sub provides { my $self = shift; my $provides = ( $self->{values}->{provides} ||= {} ); %$provides = (%$provides, @_) if @_; return $provides; } sub auto_provides { my $self = shift; return $self unless $self->is_admin; unless (-e 'MANIFEST') { warn "Cannot deduce auto_provides without a MANIFEST, skipping\n"; return $self; } # Avoid spurious warnings as we are not checking manifest here. local $SIG{__WARN__} = sub {1}; require ExtUtils::Manifest; local *ExtUtils::Manifest::manicheck = sub { return }; require Module::Build; my $build = Module::Build->new( dist_name => $self->name, dist_version => $self->version, license => $self->license, ); $self->provides( %{ $build->find_dist_packages || {} } ); } sub feature { my $self = shift; my $name = shift; my $features = ( $self->{values}->{features} ||= [] ); my $mods; if ( @_ == 1 and ref( $_[0] ) ) { # The user used ->feature like ->features by passing in the second # argument as a reference. Accomodate for that. $mods = $_[0]; } else { $mods = \@_; } my $count = 0; push @$features, ( $name => [ map { ref($_) ? ( ref($_) eq 'HASH' ) ? %$_ : @$_ : $_ } @$mods ] ); return @$features; } sub features { my $self = shift; while ( my ( $name, $mods ) = splice( @_, 0, 2 ) ) { $self->feature( $name, @$mods ); } return $self->{values}->{features} ? @{ $self->{values}->{features} } : (); } sub no_index { my $self = shift; my $type = shift; push @{ $self->{values}->{no_index}->{$type} }, @_ if $type; return $self->{values}->{no_index}; } sub read { my $self = shift; $self->include_deps( 'YAML::Tiny', 0 ); require YAML::Tiny; my $data = YAML::Tiny::LoadFile('META.yml'); # Call methods explicitly in case user has already set some values. while ( my ( $key, $value ) = each %$data ) { next unless $self->can($key); if ( ref $value eq 'HASH' ) { while ( my ( $module, $version ) = each %$value ) { $self->can($key)->($self, $module => $version ); } } else { $self->can($key)->($self, $value); } } return $self; } sub write { my $self = shift; return $self unless $self->is_admin; $self->admin->write_meta; return $self; } sub version_from { require ExtUtils::MM_Unix; my ( $self, $file ) = @_; $self->version( ExtUtils::MM_Unix->parse_version($file) ); # for version integrity check $self->makemaker_args( VERSION_FROM => $file ); } sub abstract_from { require ExtUtils::MM_Unix; my ( $self, $file ) = @_; $self->abstract( bless( { DISTNAME => $self->name }, 'ExtUtils::MM_Unix' )->parse_abstract($file) ); } # Add both distribution and module name sub name_from { my ($self, $file) = @_; if ( Module::Install::_read($file) =~ m/ ^ \s* package \s* ([\w:]+) \s* ; /ixms ) { my ($name, $module_name) = ($1, $1); $name =~ s{::}{-}g; $self->name($name); unless ( $self->module_name ) { $self->module_name($module_name); } } else { die("Cannot determine name from $file\n"); } } sub _extract_perl_version { if ( $_[0] =~ m/ ^\s* (?:use|require) \s* v? ([\d_\.]+) \s* ; /ixms ) { my $perl_version = $1; $perl_version =~ s{_}{}g; return $perl_version; } else { return; } } sub perl_version_from { my $self = shift; my $perl_version=_extract_perl_version(Module::Install::_read($_[0])); if ($perl_version) { $self->perl_version($perl_version); } else { warn "Cannot determine perl version info from $_[0]\n"; return; } } sub author_from { my $self = shift; my $content = Module::Install::_read($_[0]); if ($content =~ m/ =head \d \s+ (?:authors?)\b \s* ([^\n]*) | =head \d \s+ (?:licen[cs]e|licensing|copyright|legal)\b \s* .*? copyright .*? \d\d\d[\d.]+ \s* (?:\bby\b)? \s* ([^\n]*) /ixms) { my $author = $1 || $2; # XXX: ugly but should work anyway... if (eval "require Pod::Escapes; 1") { # Pod::Escapes has a mapping table. # It's in core of perl >= 5.9.3, and should be installed # as one of the Pod::Simple's prereqs, which is a prereq # of Pod::Text 3.x (see also below). $author =~ s{ E<( (\d+) | ([A-Za-z]+) )> } { defined $2 ? chr($2) : defined $Pod::Escapes::Name2character_number{$1} ? chr($Pod::Escapes::Name2character_number{$1}) : do { warn "Unknown escape: E<$1>"; "E<$1>"; }; }gex; } elsif (eval "require Pod::Text; 1" && $Pod::Text::VERSION < 3) { # Pod::Text < 3.0 has yet another mapping table, # though the table name of 2.x and 1.x are different. # (1.x is in core of Perl < 5.6, 2.x is in core of # Perl < 5.9.3) my $mapping = ($Pod::Text::VERSION < 2) ? \%Pod::Text::HTML_Escapes : \%Pod::Text::ESCAPES; $author =~ s{ E<( (\d+) | ([A-Za-z]+) )> } { defined $2 ? chr($2) : defined $mapping->{$1} ? $mapping->{$1} : do { warn "Unknown escape: E<$1>"; "E<$1>"; }; }gex; } else { $author =~ s{E}{<}g; $author =~ s{E}{>}g; } $self->author($author); } else { warn "Cannot determine author info from $_[0]\n"; } } #Stolen from M::B my %license_urls = ( perl => 'http://dev.perl.org/licenses/', apache => 'http://apache.org/licenses/LICENSE-2.0', apache_1_1 => 'http://apache.org/licenses/LICENSE-1.1', artistic => 'http://opensource.org/licenses/artistic-license.php', artistic_2 => 'http://opensource.org/licenses/artistic-license-2.0.php', lgpl => 'http://opensource.org/licenses/lgpl-license.php', lgpl2 => 'http://opensource.org/licenses/lgpl-2.1.php', lgpl3 => 'http://opensource.org/licenses/lgpl-3.0.html', bsd => 'http://opensource.org/licenses/bsd-license.php', gpl => 'http://opensource.org/licenses/gpl-license.php', gpl2 => 'http://opensource.org/licenses/gpl-2.0.php', gpl3 => 'http://opensource.org/licenses/gpl-3.0.html', mit => 'http://opensource.org/licenses/mit-license.php', mozilla => 'http://opensource.org/licenses/mozilla1.1.php', open_source => undef, unrestricted => undef, restrictive => undef, unknown => undef, ); sub license { my $self = shift; return $self->{values}->{license} unless @_; my $license = shift or die( 'Did not provide a value to license()' ); $license = __extract_license($license) || lc $license; $self->{values}->{license} = $license; # Automatically fill in license URLs if ( $license_urls{$license} ) { $self->resources( license => $license_urls{$license} ); } return 1; } sub _extract_license { my $pod = shift; my $matched; return __extract_license( ($matched) = $pod =~ m/ (=head \d \s+ L(?i:ICEN[CS]E|ICENSING)\b.*?) (=head \d.*|=cut.*|)\z /xms ) || __extract_license( ($matched) = $pod =~ m/ (=head \d \s+ (?:C(?i:OPYRIGHTS?)|L(?i:EGAL))\b.*?) (=head \d.*|=cut.*|)\z /xms ); } sub __extract_license { my $license_text = shift or return; my @phrases = ( '(?:under )?the same (?:terms|license) as (?:perl|the perl (?:\d )?programming language)' => 'perl', 1, '(?:under )?the terms of (?:perl|the perl programming language) itself' => 'perl', 1, 'Artistic and GPL' => 'perl', 1, 'GNU general public license' => 'gpl', 1, 'GNU public license' => 'gpl', 1, 'GNU lesser general public license' => 'lgpl', 1, 'GNU lesser public license' => 'lgpl', 1, 'GNU library general public license' => 'lgpl', 1, 'GNU library public license' => 'lgpl', 1, 'GNU Free Documentation license' => 'unrestricted', 1, 'GNU Affero General Public License' => 'open_source', 1, '(?:Free)?BSD license' => 'bsd', 1, 'Artistic license 2\.0' => 'artistic_2', 1, 'Artistic license' => 'artistic', 1, 'Apache (?:Software )?license' => 'apache', 1, 'GPL' => 'gpl', 1, 'LGPL' => 'lgpl', 1, 'BSD' => 'bsd', 1, 'Artistic' => 'artistic', 1, 'MIT' => 'mit', 1, 'Mozilla Public License' => 'mozilla', 1, 'Q Public License' => 'open_source', 1, 'OpenSSL License' => 'unrestricted', 1, 'SSLeay License' => 'unrestricted', 1, 'zlib License' => 'open_source', 1, 'proprietary' => 'proprietary', 0, ); while ( my ($pattern, $license, $osi) = splice(@phrases, 0, 3) ) { $pattern =~ s#\s+#\\s+#gs; if ( $license_text =~ /\b$pattern\b/i ) { return $license; } } return ''; } sub license_from { my $self = shift; if (my $license=_extract_license(Module::Install::_read($_[0]))) { $self->license($license); } else { warn "Cannot determine license info from $_[0]\n"; return 'unknown'; } } sub _extract_bugtracker { my @links = $_[0] =~ m#L<( https?\Q://rt.cpan.org/\E[^>]+| https?\Q://github.com/\E[\w_]+/[\w_]+/issues| https?\Q://code.google.com/p/\E[\w_\-]+/issues/list )>#gx; my %links; @links{@links}=(); @links=keys %links; return @links; } sub bugtracker_from { my $self = shift; my $content = Module::Install::_read($_[0]); my @links = _extract_bugtracker($content); unless ( @links ) { warn "Cannot determine bugtracker info from $_[0]\n"; return 0; } if ( @links > 1 ) { warn "Found more than one bugtracker link in $_[0]\n"; return 0; } # Set the bugtracker bugtracker( $links[0] ); return 1; } sub requires_from { my $self = shift; my $content = Module::Install::_readperl($_[0]); my @requires = $content =~ m/^use\s+([^\W\d]\w*(?:::\w+)*)\s+(v?[\d\.]+)/mg; while ( @requires ) { my $module = shift @requires; my $version = shift @requires; $self->requires( $module => $version ); } } sub test_requires_from { my $self = shift; my $content = Module::Install::_readperl($_[0]); my @requires = $content =~ m/^use\s+([^\W\d]\w*(?:::\w+)*)\s+([\d\.]+)/mg; while ( @requires ) { my $module = shift @requires; my $version = shift @requires; $self->test_requires( $module => $version ); } } # Convert triple-part versions (eg, 5.6.1 or 5.8.9) to # numbers (eg, 5.006001 or 5.008009). # Also, convert double-part versions (eg, 5.8) sub _perl_version { my $v = $_[-1]; $v =~ s/^([1-9])\.([1-9]\d?\d?)$/sprintf("%d.%03d",$1,$2)/e; $v =~ s/^([1-9])\.([1-9]\d?\d?)\.(0|[1-9]\d?\d?)$/sprintf("%d.%03d%03d",$1,$2,$3 || 0)/e; $v =~ s/(\.\d\d\d)000$/$1/; $v =~ s/_.+$//; if ( ref($v) ) { # Numify $v = $v + 0; } return $v; } sub add_metadata { my $self = shift; my %hash = @_; for my $key (keys %hash) { warn "add_metadata: $key is not prefixed with 'x_'.\n" . "Use appopriate function to add non-private metadata.\n" unless $key =~ /^x_/; $self->{values}->{$key} = $hash{$key}; } } ###################################################################### # MYMETA Support sub WriteMyMeta { die "WriteMyMeta has been deprecated"; } sub write_mymeta_yaml { my $self = shift; # We need YAML::Tiny to write the MYMETA.yml file unless ( eval { require YAML::Tiny; 1; } ) { return 1; } # Generate the data my $meta = $self->_write_mymeta_data or return 1; # Save as the MYMETA.yml file print "Writing MYMETA.yml\n"; YAML::Tiny::DumpFile('MYMETA.yml', $meta); } sub write_mymeta_json { my $self = shift; # We need JSON to write the MYMETA.json file unless ( eval { require JSON; 1; } ) { return 1; } # Generate the data my $meta = $self->_write_mymeta_data or return 1; # Save as the MYMETA.yml file print "Writing MYMETA.json\n"; Module::Install::_write( 'MYMETA.json', JSON->new->pretty(1)->canonical->encode($meta), ); } sub _write_mymeta_data { my $self = shift; # If there's no existing META.yml there is nothing we can do return undef unless -f 'META.yml'; # We need Parse::CPAN::Meta to load the file unless ( eval { require Parse::CPAN::Meta; 1; } ) { return undef; } # Merge the perl version into the dependencies my $val = $self->Meta->{values}; my $perl = delete $val->{perl_version}; if ( $perl ) { $val->{requires} ||= []; my $requires = $val->{requires}; # Canonize to three-dot version after Perl 5.6 if ( $perl >= 5.006 ) { $perl =~ s{^(\d+)\.(\d\d\d)(\d*)}{join('.', $1, int($2||0), int($3||0))}e } unshift @$requires, [ perl => $perl ]; } # Load the advisory META.yml file my @yaml = Parse::CPAN::Meta::LoadFile('META.yml'); my $meta = $yaml[0]; # Overwrite the non-configure dependency hashs delete $meta->{requires}; delete $meta->{build_requires}; delete $meta->{recommends}; if ( exists $val->{requires} ) { $meta->{requires} = { map { @$_ } @{ $val->{requires} } }; } if ( exists $val->{build_requires} ) { $meta->{build_requires} = { map { @$_ } @{ $val->{build_requires} } }; } return $meta; } 1; SMS-Send-1.06/inc/Module/Install/Makefile.pm0000644000175100017510000002701211656364022017047 0ustar adamadam#line 1 package Module::Install::Makefile; use strict 'vars'; use ExtUtils::MakeMaker (); use Module::Install::Base (); use Fcntl qw/:flock :seek/; use vars qw{$VERSION @ISA $ISCORE}; BEGIN { $VERSION = '1.04'; @ISA = 'Module::Install::Base'; $ISCORE = 1; } sub Makefile { $_[0] } my %seen = (); sub prompt { shift; # Infinite loop protection my @c = caller(); if ( ++$seen{"$c[1]|$c[2]|$_[0]"} > 3 ) { die "Caught an potential prompt infinite loop ($c[1]|$c[2]|$_[0])"; } # In automated testing or non-interactive session, always use defaults if ( ($ENV{AUTOMATED_TESTING} or -! -t STDIN) and ! $ENV{PERL_MM_USE_DEFAULT} ) { local $ENV{PERL_MM_USE_DEFAULT} = 1; goto &ExtUtils::MakeMaker::prompt; } else { goto &ExtUtils::MakeMaker::prompt; } } # Store a cleaned up version of the MakeMaker version, # since we need to behave differently in a variety of # ways based on the MM version. my $makemaker = eval $ExtUtils::MakeMaker::VERSION; # If we are passed a param, do a "newer than" comparison. # Otherwise, just return the MakeMaker version. sub makemaker { ( @_ < 2 or $makemaker >= eval($_[1]) ) ? $makemaker : 0 } # Ripped from ExtUtils::MakeMaker 6.56, and slightly modified # as we only need to know here whether the attribute is an array # or a hash or something else (which may or may not be appendable). my %makemaker_argtype = ( C => 'ARRAY', CONFIG => 'ARRAY', # CONFIGURE => 'CODE', # ignore DIR => 'ARRAY', DL_FUNCS => 'HASH', DL_VARS => 'ARRAY', EXCLUDE_EXT => 'ARRAY', EXE_FILES => 'ARRAY', FUNCLIST => 'ARRAY', H => 'ARRAY', IMPORTS => 'HASH', INCLUDE_EXT => 'ARRAY', LIBS => 'ARRAY', # ignore '' MAN1PODS => 'HASH', MAN3PODS => 'HASH', META_ADD => 'HASH', META_MERGE => 'HASH', PL_FILES => 'HASH', PM => 'HASH', PMLIBDIRS => 'ARRAY', PMLIBPARENTDIRS => 'ARRAY', PREREQ_PM => 'HASH', CONFIGURE_REQUIRES => 'HASH', SKIP => 'ARRAY', TYPEMAPS => 'ARRAY', XS => 'HASH', # VERSION => ['version',''], # ignore # _KEEP_AFTER_FLUSH => '', clean => 'HASH', depend => 'HASH', dist => 'HASH', dynamic_lib=> 'HASH', linkext => 'HASH', macro => 'HASH', postamble => 'HASH', realclean => 'HASH', test => 'HASH', tool_autosplit => 'HASH', # special cases where you can use makemaker_append CCFLAGS => 'APPENDABLE', DEFINE => 'APPENDABLE', INC => 'APPENDABLE', LDDLFLAGS => 'APPENDABLE', LDFROM => 'APPENDABLE', ); sub makemaker_args { my ($self, %new_args) = @_; my $args = ( $self->{makemaker_args} ||= {} ); foreach my $key (keys %new_args) { if ($makemaker_argtype{$key}) { if ($makemaker_argtype{$key} eq 'ARRAY') { $args->{$key} = [] unless defined $args->{$key}; unless (ref $args->{$key} eq 'ARRAY') { $args->{$key} = [$args->{$key}] } push @{$args->{$key}}, ref $new_args{$key} eq 'ARRAY' ? @{$new_args{$key}} : $new_args{$key}; } elsif ($makemaker_argtype{$key} eq 'HASH') { $args->{$key} = {} unless defined $args->{$key}; foreach my $skey (keys %{ $new_args{$key} }) { $args->{$key}{$skey} = $new_args{$key}{$skey}; } } elsif ($makemaker_argtype{$key} eq 'APPENDABLE') { $self->makemaker_append($key => $new_args{$key}); } } else { if (defined $args->{$key}) { warn qq{MakeMaker attribute "$key" is overriden; use "makemaker_append" to append values\n}; } $args->{$key} = $new_args{$key}; } } return $args; } # For mm args that take multiple space-seperated args, # append an argument to the current list. sub makemaker_append { my $self = shift; my $name = shift; my $args = $self->makemaker_args; $args->{$name} = defined $args->{$name} ? join( ' ', $args->{$name}, @_ ) : join( ' ', @_ ); } sub build_subdirs { my $self = shift; my $subdirs = $self->makemaker_args->{DIR} ||= []; for my $subdir (@_) { push @$subdirs, $subdir; } } sub clean_files { my $self = shift; my $clean = $self->makemaker_args->{clean} ||= {}; %$clean = ( %$clean, FILES => join ' ', grep { length $_ } ($clean->{FILES} || (), @_), ); } sub realclean_files { my $self = shift; my $realclean = $self->makemaker_args->{realclean} ||= {}; %$realclean = ( %$realclean, FILES => join ' ', grep { length $_ } ($realclean->{FILES} || (), @_), ); } sub libs { my $self = shift; my $libs = ref $_[0] ? shift : [ shift ]; $self->makemaker_args( LIBS => $libs ); } sub inc { my $self = shift; $self->makemaker_args( INC => shift ); } sub _wanted_t { } sub tests_recursive { my $self = shift; my $dir = shift || 't'; unless ( -d $dir ) { die "tests_recursive dir '$dir' does not exist"; } my %tests = map { $_ => 1 } split / /, ($self->tests || ''); require File::Find; File::Find::find( sub { /\.t$/ and -f $_ and $tests{"$File::Find::dir/*.t"} = 1 }, $dir ); $self->tests( join ' ', sort keys %tests ); } sub write { my $self = shift; die "&Makefile->write() takes no arguments\n" if @_; # Check the current Perl version my $perl_version = $self->perl_version; if ( $perl_version ) { eval "use $perl_version; 1" or die "ERROR: perl: Version $] is installed, " . "but we need version >= $perl_version"; } # Make sure we have a new enough MakeMaker require ExtUtils::MakeMaker; if ( $perl_version and $self->_cmp($perl_version, '5.006') >= 0 ) { # MakeMaker can complain about module versions that include # an underscore, even though its own version may contain one! # Hence the funny regexp to get rid of it. See RT #35800 # for details. my ($v) = $ExtUtils::MakeMaker::VERSION =~ /^(\d+\.\d+)/; $self->build_requires( 'ExtUtils::MakeMaker' => $v ); $self->configure_requires( 'ExtUtils::MakeMaker' => $v ); } else { # Allow legacy-compatibility with 5.005 by depending on the # most recent EU:MM that supported 5.005. $self->build_requires( 'ExtUtils::MakeMaker' => 6.36 ); $self->configure_requires( 'ExtUtils::MakeMaker' => 6.36 ); } # Generate the MakeMaker params my $args = $self->makemaker_args; $args->{DISTNAME} = $self->name; $args->{NAME} = $self->module_name || $self->name; $args->{NAME} =~ s/-/::/g; $args->{VERSION} = $self->version or die <<'EOT'; ERROR: Can't determine distribution version. Please specify it explicitly via 'version' in Makefile.PL, or set a valid $VERSION in a module, and provide its file path via 'version_from' (or 'all_from' if you prefer) in Makefile.PL. EOT if ( $self->tests ) { my @tests = split ' ', $self->tests; my %seen; $args->{test} = { TESTS => (join ' ', grep {!$seen{$_}++} @tests), }; } elsif ( $Module::Install::ExtraTests::use_extratests ) { # Module::Install::ExtraTests doesn't set $self->tests and does its own tests via harness. # So, just ignore our xt tests here. } elsif ( -d 'xt' and ($Module::Install::AUTHOR or $ENV{RELEASE_TESTING}) ) { $args->{test} = { TESTS => join( ' ', map { "$_/*.t" } grep { -d $_ } qw{ t xt } ), }; } if ( $] >= 5.005 ) { $args->{ABSTRACT} = $self->abstract; $args->{AUTHOR} = join ', ', @{$self->author || []}; } if ( $self->makemaker(6.10) ) { $args->{NO_META} = 1; #$args->{NO_MYMETA} = 1; } if ( $self->makemaker(6.17) and $self->sign ) { $args->{SIGN} = 1; } unless ( $self->is_admin ) { delete $args->{SIGN}; } if ( $self->makemaker(6.31) and $self->license ) { $args->{LICENSE} = $self->license; } my $prereq = ($args->{PREREQ_PM} ||= {}); %$prereq = ( %$prereq, map { @$_ } # flatten [module => version] map { @$_ } grep $_, ($self->requires) ); # Remove any reference to perl, PREREQ_PM doesn't support it delete $args->{PREREQ_PM}->{perl}; # Merge both kinds of requires into BUILD_REQUIRES my $build_prereq = ($args->{BUILD_REQUIRES} ||= {}); %$build_prereq = ( %$build_prereq, map { @$_ } # flatten [module => version] map { @$_ } grep $_, ($self->configure_requires, $self->build_requires) ); # Remove any reference to perl, BUILD_REQUIRES doesn't support it delete $args->{BUILD_REQUIRES}->{perl}; # Delete bundled dists from prereq_pm, add it to Makefile DIR my $subdirs = ($args->{DIR} || []); if ($self->bundles) { my %processed; foreach my $bundle (@{ $self->bundles }) { my ($mod_name, $dist_dir) = @$bundle; delete $prereq->{$mod_name}; $dist_dir = File::Basename::basename($dist_dir); # dir for building this module if (not exists $processed{$dist_dir}) { if (-d $dist_dir) { # List as sub-directory to be processed by make push @$subdirs, $dist_dir; } # Else do nothing: the module is already present on the system $processed{$dist_dir} = undef; } } } unless ( $self->makemaker('6.55_03') ) { %$prereq = (%$prereq,%$build_prereq); delete $args->{BUILD_REQUIRES}; } if ( my $perl_version = $self->perl_version ) { eval "use $perl_version; 1" or die "ERROR: perl: Version $] is installed, " . "but we need version >= $perl_version"; if ( $self->makemaker(6.48) ) { $args->{MIN_PERL_VERSION} = $perl_version; } } if ($self->installdirs) { warn qq{old INSTALLDIRS (probably set by makemaker_args) is overriden by installdirs\n} if $args->{INSTALLDIRS}; $args->{INSTALLDIRS} = $self->installdirs; } my %args = map { ( $_ => $args->{$_} ) } grep {defined($args->{$_} ) } keys %$args; my $user_preop = delete $args{dist}->{PREOP}; if ( my $preop = $self->admin->preop($user_preop) ) { foreach my $key ( keys %$preop ) { $args{dist}->{$key} = $preop->{$key}; } } my $mm = ExtUtils::MakeMaker::WriteMakefile(%args); $self->fix_up_makefile($mm->{FIRST_MAKEFILE} || 'Makefile'); } sub fix_up_makefile { my $self = shift; my $makefile_name = shift; my $top_class = ref($self->_top) || ''; my $top_version = $self->_top->VERSION || ''; my $preamble = $self->preamble ? "# Preamble by $top_class $top_version\n" . $self->preamble : ''; my $postamble = "# Postamble by $top_class $top_version\n" . ($self->postamble || ''); local *MAKEFILE; open MAKEFILE, "+< $makefile_name" or die "fix_up_makefile: Couldn't open $makefile_name: $!"; eval { flock MAKEFILE, LOCK_EX }; my $makefile = do { local $/; }; $makefile =~ s/\b(test_harness\(\$\(TEST_VERBOSE\), )/$1'inc', /; $makefile =~ s/( -I\$\(INST_ARCHLIB\))/ -Iinc$1/g; $makefile =~ s/( "-I\$\(INST_LIB\)")/ "-Iinc"$1/g; $makefile =~ s/^(FULLPERL = .*)/$1 "-Iinc"/m; $makefile =~ s/^(PERL = .*)/$1 "-Iinc"/m; # Module::Install will never be used to build the Core Perl # Sometimes PERL_LIB and PERL_ARCHLIB get written anyway, which breaks # PREFIX/PERL5LIB, and thus, install_share. Blank them if they exist $makefile =~ s/^PERL_LIB = .+/PERL_LIB =/m; #$makefile =~ s/^PERL_ARCHLIB = .+/PERL_ARCHLIB =/m; # Perl 5.005 mentions PERL_LIB explicitly, so we have to remove that as well. $makefile =~ s/(\"?)-I\$\(PERL_LIB\)\1//g; # XXX - This is currently unused; not sure if it breaks other MM-users # $makefile =~ s/^pm_to_blib\s+:\s+/pm_to_blib :: /mg; seek MAKEFILE, 0, SEEK_SET; truncate MAKEFILE, 0; print MAKEFILE "$preamble$makefile$postamble" or die $!; close MAKEFILE or die $!; 1; } sub preamble { my ($self, $text) = @_; $self->{preamble} = $text . $self->{preamble} if defined $text; $self->{preamble}; } sub postamble { my ($self, $text) = @_; $self->{postamble} ||= $self->admin->postamble; $self->{postamble} .= $text if defined $text; $self->{postamble} } 1; __END__ #line 540 SMS-Send-1.06/inc/Module/Install.pm0000644000175100017510000003013511656364021015331 0ustar adamadam#line 1 package Module::Install; # For any maintainers: # The load order for Module::Install is a bit magic. # It goes something like this... # # IF ( host has Module::Install installed, creating author mode ) { # 1. Makefile.PL calls "use inc::Module::Install" # 2. $INC{inc/Module/Install.pm} set to installed version of inc::Module::Install # 3. The installed version of inc::Module::Install loads # 4. inc::Module::Install calls "require Module::Install" # 5. The ./inc/ version of Module::Install loads # } ELSE { # 1. Makefile.PL calls "use inc::Module::Install" # 2. $INC{inc/Module/Install.pm} set to ./inc/ version of Module::Install # 3. The ./inc/ version of Module::Install loads # } use 5.005; use strict 'vars'; use Cwd (); use File::Find (); use File::Path (); use vars qw{$VERSION $MAIN}; BEGIN { # All Module::Install core packages now require synchronised versions. # This will be used to ensure we don't accidentally load old or # different versions of modules. # This is not enforced yet, but will be some time in the next few # releases once we can make sure it won't clash with custom # Module::Install extensions. $VERSION = '1.04'; # Storage for the pseudo-singleton $MAIN = undef; *inc::Module::Install::VERSION = *VERSION; @inc::Module::Install::ISA = __PACKAGE__; } sub import { my $class = shift; my $self = $class->new(@_); my $who = $self->_caller; #------------------------------------------------------------- # all of the following checks should be included in import(), # to allow "eval 'require Module::Install; 1' to test # installation of Module::Install. (RT #51267) #------------------------------------------------------------- # Whether or not inc::Module::Install is actually loaded, the # $INC{inc/Module/Install.pm} is what will still get set as long as # the caller loaded module this in the documented manner. # If not set, the caller may NOT have loaded the bundled version, and thus # they may not have a MI version that works with the Makefile.PL. This would # result in false errors or unexpected behaviour. And we don't want that. my $file = join( '/', 'inc', split /::/, __PACKAGE__ ) . '.pm'; unless ( $INC{$file} ) { die <<"END_DIE" } Please invoke ${\__PACKAGE__} with: use inc::${\__PACKAGE__}; not: use ${\__PACKAGE__}; END_DIE # This reportedly fixes a rare Win32 UTC file time issue, but # as this is a non-cross-platform XS module not in the core, # we shouldn't really depend on it. See RT #24194 for detail. # (Also, this module only supports Perl 5.6 and above). eval "use Win32::UTCFileTime" if $^O eq 'MSWin32' && $] >= 5.006; # If the script that is loading Module::Install is from the future, # then make will detect this and cause it to re-run over and over # again. This is bad. Rather than taking action to touch it (which # is unreliable on some platforms and requires write permissions) # for now we should catch this and refuse to run. if ( -f $0 ) { my $s = (stat($0))[9]; # If the modification time is only slightly in the future, # sleep briefly to remove the problem. my $a = $s - time; if ( $a > 0 and $a < 5 ) { sleep 5 } # Too far in the future, throw an error. my $t = time; if ( $s > $t ) { die <<"END_DIE" } Your installer $0 has a modification time in the future ($s > $t). This is known to create infinite loops in make. Please correct this, then run $0 again. END_DIE } # Build.PL was formerly supported, but no longer is due to excessive # difficulty in implementing every single feature twice. if ( $0 =~ /Build.PL$/i ) { die <<"END_DIE" } Module::Install no longer supports Build.PL. It was impossible to maintain duel backends, and has been deprecated. Please remove all Build.PL files and only use the Makefile.PL installer. END_DIE #------------------------------------------------------------- # To save some more typing in Module::Install installers, every... # use inc::Module::Install # ...also acts as an implicit use strict. $^H |= strict::bits(qw(refs subs vars)); #------------------------------------------------------------- unless ( -f $self->{file} ) { foreach my $key (keys %INC) { delete $INC{$key} if $key =~ /Module\/Install/; } local $^W; require "$self->{path}/$self->{dispatch}.pm"; File::Path::mkpath("$self->{prefix}/$self->{author}"); $self->{admin} = "$self->{name}::$self->{dispatch}"->new( _top => $self ); $self->{admin}->init; @_ = ($class, _self => $self); goto &{"$self->{name}::import"}; } local $^W; *{"${who}::AUTOLOAD"} = $self->autoload; $self->preload; # Unregister loader and worker packages so subdirs can use them again delete $INC{'inc/Module/Install.pm'}; delete $INC{'Module/Install.pm'}; # Save to the singleton $MAIN = $self; return 1; } sub autoload { my $self = shift; my $who = $self->_caller; my $cwd = Cwd::cwd(); my $sym = "${who}::AUTOLOAD"; $sym->{$cwd} = sub { my $pwd = Cwd::cwd(); if ( my $code = $sym->{$pwd} ) { # Delegate back to parent dirs goto &$code unless $cwd eq $pwd; } unless ($$sym =~ s/([^:]+)$//) { # XXX: it looks like we can't retrieve the missing function # via $$sym (usually $main::AUTOLOAD) in this case. # I'm still wondering if we should slurp Makefile.PL to # get some context or not ... my ($package, $file, $line) = caller; die <<"EOT"; Unknown function is found at $file line $line. Execution of $file aborted due to runtime errors. If you're a contributor to a project, you may need to install some Module::Install extensions from CPAN (or other repository). If you're a user of a module, please contact the author. EOT } my $method = $1; if ( uc($method) eq $method ) { # Do nothing return; } elsif ( $method =~ /^_/ and $self->can($method) ) { # Dispatch to the root M:I class return $self->$method(@_); } # Dispatch to the appropriate plugin unshift @_, ( $self, $1 ); goto &{$self->can('call')}; }; } sub preload { my $self = shift; unless ( $self->{extensions} ) { $self->load_extensions( "$self->{prefix}/$self->{path}", $self ); } my @exts = @{$self->{extensions}}; unless ( @exts ) { @exts = $self->{admin}->load_all_extensions; } my %seen; foreach my $obj ( @exts ) { while (my ($method, $glob) = each %{ref($obj) . '::'}) { next unless $obj->can($method); next if $method =~ /^_/; next if $method eq uc($method); $seen{$method}++; } } my $who = $self->_caller; foreach my $name ( sort keys %seen ) { local $^W; *{"${who}::$name"} = sub { ${"${who}::AUTOLOAD"} = "${who}::$name"; goto &{"${who}::AUTOLOAD"}; }; } } sub new { my ($class, %args) = @_; delete $INC{'FindBin.pm'}; { # to suppress the redefine warning local $SIG{__WARN__} = sub {}; require FindBin; } # ignore the prefix on extension modules built from top level. my $base_path = Cwd::abs_path($FindBin::Bin); unless ( Cwd::abs_path(Cwd::cwd()) eq $base_path ) { delete $args{prefix}; } return $args{_self} if $args{_self}; $args{dispatch} ||= 'Admin'; $args{prefix} ||= 'inc'; $args{author} ||= ($^O eq 'VMS' ? '_author' : '.author'); $args{bundle} ||= 'inc/BUNDLES'; $args{base} ||= $base_path; $class =~ s/^\Q$args{prefix}\E:://; $args{name} ||= $class; $args{version} ||= $class->VERSION; unless ( $args{path} ) { $args{path} = $args{name}; $args{path} =~ s!::!/!g; } $args{file} ||= "$args{base}/$args{prefix}/$args{path}.pm"; $args{wrote} = 0; bless( \%args, $class ); } sub call { my ($self, $method) = @_; my $obj = $self->load($method) or return; splice(@_, 0, 2, $obj); goto &{$obj->can($method)}; } sub load { my ($self, $method) = @_; $self->load_extensions( "$self->{prefix}/$self->{path}", $self ) unless $self->{extensions}; foreach my $obj (@{$self->{extensions}}) { return $obj if $obj->can($method); } my $admin = $self->{admin} or die <<"END_DIE"; The '$method' method does not exist in the '$self->{prefix}' path! Please remove the '$self->{prefix}' directory and run $0 again to load it. END_DIE my $obj = $admin->load($method, 1); push @{$self->{extensions}}, $obj; $obj; } sub load_extensions { my ($self, $path, $top) = @_; my $should_reload = 0; unless ( grep { ! ref $_ and lc $_ eq lc $self->{prefix} } @INC ) { unshift @INC, $self->{prefix}; $should_reload = 1; } foreach my $rv ( $self->find_extensions($path) ) { my ($file, $pkg) = @{$rv}; next if $self->{pathnames}{$pkg}; local $@; my $new = eval { local $^W; require $file; $pkg->can('new') }; unless ( $new ) { warn $@ if $@; next; } $self->{pathnames}{$pkg} = $should_reload ? delete $INC{$file} : $INC{$file}; push @{$self->{extensions}}, &{$new}($pkg, _top => $top ); } $self->{extensions} ||= []; } sub find_extensions { my ($self, $path) = @_; my @found; File::Find::find( sub { my $file = $File::Find::name; return unless $file =~ m!^\Q$path\E/(.+)\.pm\Z!is; my $subpath = $1; return if lc($subpath) eq lc($self->{dispatch}); $file = "$self->{path}/$subpath.pm"; my $pkg = "$self->{name}::$subpath"; $pkg =~ s!/!::!g; # If we have a mixed-case package name, assume case has been preserved # correctly. Otherwise, root through the file to locate the case-preserved # version of the package name. if ( $subpath eq lc($subpath) || $subpath eq uc($subpath) ) { my $content = Module::Install::_read($subpath . '.pm'); my $in_pod = 0; foreach ( split //, $content ) { $in_pod = 1 if /^=\w/; $in_pod = 0 if /^=cut/; next if ($in_pod || /^=cut/); # skip pod text next if /^\s*#/; # and comments if ( m/^\s*package\s+($pkg)\s*;/i ) { $pkg = $1; last; } } } push @found, [ $file, $pkg ]; }, $path ) if -d $path; @found; } ##################################################################### # Common Utility Functions sub _caller { my $depth = 0; my $call = caller($depth); while ( $call eq __PACKAGE__ ) { $depth++; $call = caller($depth); } return $call; } # Done in evals to avoid confusing Perl::MinimumVersion eval( $] >= 5.006 ? <<'END_NEW' : <<'END_OLD' ); die $@ if $@; sub _read { local *FH; open( FH, '<', $_[0] ) or die "open($_[0]): $!"; my $string = do { local $/; }; close FH or die "close($_[0]): $!"; return $string; } END_NEW sub _read { local *FH; open( FH, "< $_[0]" ) or die "open($_[0]): $!"; my $string = do { local $/; }; close FH or die "close($_[0]): $!"; return $string; } END_OLD sub _readperl { my $string = Module::Install::_read($_[0]); $string =~ s/(?:\015{1,2}\012|\015|\012)/\n/sg; $string =~ s/(\n)\n*__(?:DATA|END)__\b.*\z/$1/s; $string =~ s/\n\n=\w+.+?\n\n=cut\b.+?\n+/\n\n/sg; return $string; } sub _readpod { my $string = Module::Install::_read($_[0]); $string =~ s/(?:\015{1,2}\012|\015|\012)/\n/sg; return $string if $_[0] =~ /\.pod\z/; $string =~ s/(^|\n=cut\b.+?\n+)[^=\s].+?\n(\n=\w+|\z)/$1$2/sg; $string =~ s/\n*=pod\b[^\n]*\n+/\n\n/sg; $string =~ s/\n*=cut\b[^\n]*\n+/\n\n/sg; $string =~ s/^\n+//s; return $string; } # Done in evals to avoid confusing Perl::MinimumVersion eval( $] >= 5.006 ? <<'END_NEW' : <<'END_OLD' ); die $@ if $@; sub _write { local *FH; open( FH, '>', $_[0] ) or die "open($_[0]): $!"; foreach ( 1 .. $#_ ) { print FH $_[$_] or die "print($_[0]): $!"; } close FH or die "close($_[0]): $!"; } END_NEW sub _write { local *FH; open( FH, "> $_[0]" ) or die "open($_[0]): $!"; foreach ( 1 .. $#_ ) { print FH $_[$_] or die "print($_[0]): $!"; } close FH or die "close($_[0]): $!"; } END_OLD # _version is for processing module versions (eg, 1.03_05) not # Perl versions (eg, 5.8.1). sub _version ($) { my $s = shift || 0; my $d =()= $s =~ /(\.)/g; if ( $d >= 2 ) { # Normalise multipart versions $s =~ s/(\.)(\d{1,3})/sprintf("$1%03d",$2)/eg; } $s =~ s/^(\d+)\.?//; my $l = $1 || 0; my @v = map { $_ . '0' x (3 - length $_) } $s =~ /(\d{1,3})\D?/g; $l = $l . '.' . join '', @v if @v; return $l + 0; } sub _cmp ($$) { _version($_[1]) <=> _version($_[2]); } # Cloned from Params::Util::_CLASS sub _CLASS ($) { ( defined $_[0] and ! ref $_[0] and $_[0] =~ m/^[^\W\d]\w*(?:::\w+)*\z/s ) ? $_[0] : undef; } 1; # Copyright 2008 - 2011 Adam Kennedy.