libwnckmm-1.0-0.1.1/0000775000175000017500000000000012414127716013731 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/autogen.sh0000644000175000017500000000000012257242532015712 0ustar00execexec00000000000000libwnckmm-1.0-0.1.1/INSTALL0000644000175000017500000003660512257241623014771 0ustar00execexec00000000000000Installation Instructions ************************* Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. HP-UX `make' updates targets which have the same time stamps as their prerequisites, which makes it generally unusable when shipped generated files such as `configure' are involved. Use GNU `make' instead. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf limitation. Until the limitation is lifted, you can use this workaround: CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. libwnckmm-1.0-0.1.1/m4/0000775000175000017500000000000012414127716014251 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/m4/config.guess0000755000175000017500000013036112414127605016570 0ustar00execexec00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2013 Free Software Foundation, Inc. timestamp='2013-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD # # Please send patches with a ChangeLog entry to config-patches@gnu.org. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "${UNAME_SYSTEM}" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval $set_cc_for_build cat <<-EOF > $dummy.c #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` ;; esac # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case ${UNAME_PROCESSOR} in amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW64*:*) echo ${UNAME_MACHINE}-pc-mingw64 exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:MSYS*:*) echo ${UNAME_MACHINE}-pc-msys exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; aarch64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="gnulibc1" ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-${LIBC} else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi else echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf fi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; cris:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; hexagon:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:Linux:*:*) echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; or1k:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; or32:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-${LIBC} exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; *) echo hppa-unknown-linux-${LIBC} ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-${LIBC} exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-${LIBC} exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-${LIBC} exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; tile*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval $set_cc_for_build if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi fi echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-?:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk${UNAME_RELEASE} exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; esac eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: libwnckmm-1.0-0.1.1/m4/generate-binding.am0000664000175000017500000000773712414127163020004 0ustar00execexec00000000000000## Copyright (c) 2009 Openismus GmbH ## ## This file is part of mm-common. ## ## mm-common is free software: you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published ## by the Free Software Foundation, either version 2 of the License, ## or (at your option) any later version. ## ## mm-common is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with mm-common. If not, see . ## Parameters: binding_name, wrap_init_flags ## Overrides: codegen_srcdir, codegen_m4_srcdir, binding_outputdir, ## gmmproc, gen_wrap_init, gmmproc_flags ## Files: files_codegen_m4, files_defs, files_hg, files_ccg ## Output: dist_noinst_DATA, gmmproc_dependencies, other_built_sources, ## MAINTAINERCLEANFILES # Location of the module's gmmproc support files. codegen_srcdir ?= $(top_srcdir)/codegen # Location of the module's gmmproc M4 files, # and of any extra m4 files from installed modules, # such as from gtkmm rather than just glibmm. # Use, for instance, this in configure.ac: # MM_PKG_CONFIG_SUBST([GMMPROC_EXTRA_M4_DIR], [--variable=gmmprocm4dir gtkmm-3.0]) codegen_m4_srcdir ?= $(codegen_srcdir)/m4 # Destination directory of the generated source files. binding_outputdir ?= $(if $(srcdir:.=),$(dir $(top_srcdir)/$(subdir)),../)$(binding_name) # Additional built sources not generated by gmmproc. other_built_sources = $(binding_outputdir)/wrap_init.cc # Where to put the stamp files for the gmmproc output. binding_stampdir = $(srcdir)/.stamps # Lists of qualified file names relative to the current directory. binding_relfiles_m4 = $(addprefix $(codegen_m4_srcdir)/,$(files_codegen_m4)) binding_relfiles_hg = $(addprefix $(srcdir)/,$(files_hg)) binding_stampfiles = $(patsubst %.hg,$(binding_stampdir)/%.stamp,$(files_hg)) # Distributed code generation source files. dist_noinst_DATA = $(files_defs) $(files_hg) $(files_ccg) # Delete stamps on make maintainer-clean. The other generated source # files are deleted by the make rules for the output directory. MAINTAINERCLEANFILES = $(binding_stampdir)/*.stamp # Dependencies of the gmmproc code generator targets. gmmproc_dependencies = $(binding_relfiles_m4) $(files_defs) # Default command lines for running the code generators. gmmproc ?= $(PERL) -I"$(GMMPROC_DIR)/pm" -- "$(GMMPROC_DIR)/gmmproc" gen_wrap_init ?= $(PERL) -- "$(GMMPROC_DIR)/generate_wrap_init.pl" codegen_m4_flags = $(addprefix -I , $(codegen_m4_srcdir) $(GMMPROC_EXTRA_M4_DIR)) gmmproc_flags ?= $(codegen_m4_flags) --defs $(srcdir) # Automatically created output directories. binding_mkdirs = $(binding_stampdir) $(binding_outputdir)/private # Show names of generated files in silent rules output. mm_0_gen = @echo ' GEN $(binding_outputdir)/{$*.cc,$*.h,private/$*_p.h}'; mm_v_gen = $(if $(filter 0,$(or $(V),$(AM_DEFAULT_VERBOSITY))),$(mm_0_gen)) # Declare the built sources main targets. all-local: $(binding_stampfiles) $(other_built_sources) # Create the output directories if they do not exist already. $(binding_mkdirs): $(AM_V_at)$(MKDIR_P) $@ # NOTE : generation of wrap_init.cc is disabled # Generate the wrap_init.cc file using generate_wrap_init.pl. #$(binding_outputdir)/wrap_init.cc: $(binding_relfiles_hg) $(srcdir)/Makefile.in # $(AM_V_GEN)$(gen_wrap_init) $(wrap_init_flags) $(binding_relfiles_hg) >$@ # Run the gmmproc code generator to produce the C++ binding code. $(binding_stampdir)/%.stamp: %.hg %.ccg $(gmmproc_dependencies) | $(binding_mkdirs) @: >$@ $(mm_v_gen)$(gmmproc) $(gmmproc_flags) $* $(srcdir) $(binding_outputdir) # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: libwnckmm-1.0-0.1.1/m4/lt~obsolete.m40000644000175000017500000001375612414127600017067 0ustar00execexec00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) libwnckmm-1.0-0.1.1/m4/compile-binding.am0000644000175000017500000000533012414017001017610 0ustar00execexec00000000000000## Copyright (c) 2009 Openismus GmbH ## ## This file is part of mm-common. ## ## mm-common is free software: you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published ## by the Free Software Foundation, either version 2 of the License, ## or (at your option) any later version. ## ## mm-common is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with mm-common. If not, see . ## Parameters: lib_LTLIBRARIES ## Overrides: binding_name, binding_basedir, binding_modulename ## Files: files_built_cc, files_built_h, files_built_ph, ## files_extra_cc, files_extra_h, files_extra_ph ## Output: binding_sources, binding_includes, binding_cppflags # The name of the binding module. Usually identical to the name of the # directory where the generated sources and include files live. binding_name ?= $(notdir $(subdir)) # The parent directory of the src/ and libmm/ directories. # Usually the same as the C library name. binding_basedir ?= $(patsubst %/,%,$(dir $(subdir))) # The library name of the binding, possibly including an API version suffix. # Depending on the module, the "lib" prefix may or may not be included. binding_modulename ?= $(patsubst lib%,$(binding_libprefix)%,$(basename $(lib_LTLIBRARIES))) # Try to work out whether the binding's module name includes a "lib" prefix. binding_libprefix = $(if $(filter lib%,$(binding_name)),lib) # Files to be listed in the module's _SOURCES variable. binding_sources = $(files_built_cc) $(files_extra_cc) # Default include directories and preprocessor flags. binding_includes = -I..$(if $(srcdir:.=), -I$(top_srcdir)/$(binding_basedir)) -I$(top_builddir) binding_cppflags = -DG_LOG_DOMAIN=\"$(binding_name)\" # Installation directories for header files. binding_includedir = $(includedir)/$(binding_modulename)/$(binding_name) binding_privatedir = $(binding_includedir)/private # List of installed header files. binding_include_HEADERS = $(files_built_h) $(files_extra_h) binding_private_HEADERS = $(files_built_ph) $(files_extra_ph) # Delete built sources on make maintainer-clean. binding_built_sources = $(files_built_cc) $(files_built_h) $(files_built_ph) MAINTAINERCLEANFILES = $(binding_built_sources) $(addprefix $(srcdir)/,$(binding_built_sources)) # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: libwnckmm-1.0-0.1.1/m4/install-sh0000755000175000017500000003325512414127605016260 0ustar00execexec00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: libwnckmm-1.0-0.1.1/m4/depcomp0000755000175000017500000005601612414127605015631 0ustar00execexec00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: libwnckmm-1.0-0.1.1/m4/libtool.m40000644000175000017500000106000712414127600016151 0ustar00execexec00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS libwnckmm-1.0-0.1.1/m4/ltoptions.m40000644000175000017500000003007312414127600016537 0ustar00execexec00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) libwnckmm-1.0-0.1.1/m4/ltversion.m40000644000175000017500000000126212414127600016527 0ustar00execexec00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3337 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.2]) m4_define([LT_PACKAGE_REVISION], [1.3337]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.2' macro_revision='1.3337' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) libwnckmm-1.0-0.1.1/m4/ltsugar.m40000644000175000017500000001042412414127600016163 0ustar00execexec00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) libwnckmm-1.0-0.1.1/m4/compile0000755000175000017500000001624512414127605015632 0ustar00execexec00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: libwnckmm-1.0-0.1.1/m4/missing0000755000175000017500000001533012414127605015645 0ustar00execexec00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2013-10-28.13; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: libwnckmm-1.0-0.1.1/m4/ltmain.sh0000644000175000017500000105204412414127600016065 0ustar00execexec00000000000000 # libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.3ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.2 Debian-2.4.2-1.3ubuntu1" TIMESTAMP="" package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-warning|--no-warn) opt_warning=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then # Remove ${wl} instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" func_resolve_sysroot "$deplib" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 libwnckmm-1.0-0.1.1/m4/config.sub0000755000175000017500000010535412414127605016237 0ustar00execexec00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2013 Free Software Foundation, Inc. timestamp='2013-08-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches with a ChangeLog entry to config-patches@gnu.org. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | epiphany \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 \ | or1k | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -nacl*) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or1k-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: libwnckmm-1.0-0.1.1/Makefile.am0000644000175000017500000000255412257316757016003 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} DISTCHECK_CONFIGURE_FLAGS = --enable-warnings=fatal if MAINTAINER_MODE src_subdirs = tools wnck/src else src_subdirs = endif if ENABLE_DOCUMENTATION doc_subdirs = doc else doc_subdirs = endif SUBDIRS = $(src_subdirs) wnck/wnckmm $(doc_subdirs) wnckmm_includedir = $(includedir)/$(WNCKMM_MODULE_NAME) wnckmm_include_HEADERS = wnck/wnckmm.h wnckmm_libincludedir = $(libdir)/$(WNCKMM_MODULE_NAME)/include pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = wnck/$(WNCKMM_MODULE_NAME).pc text_files = README.md dist_noinst_DATA = $(text_files) dist_noinst_SCRIPTS = autogen.sh libwnckmm-1.0-0.1.1/configure0000775000175000017500000214326712414127604015653 0ustar00execexec00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for wnckmm 0.1.1. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and http://example.org $0: about your system, including any error possibly output $0: before this message. Then install a modern shell, or $0: manually run the script under such a shell if you do $0: have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='wnckmm' PACKAGE_TARNAME='libwnckmm-1.0' PACKAGE_VERSION='0.1.1' PACKAGE_STRING='wnckmm 0.1.1' PACKAGE_BUGREPORT='http://example.org' PACKAGE_URL='' ac_unique_file="wnck/wnckmm.h" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS DOCINSTALL_FLAGS DOXYGEN_TAGFILES ENABLE_DOCUMENTATION_FALSE ENABLE_DOCUMENTATION_TRUE XSLTPROC DOXYGEN DOT PERL GMMPROC_EXTRA_M4_DIR GMMPROC_DIR WNCKMM_LIBS WNCKMM_CFLAGS WNCKMM_MODULES WNCK_LIBS WNCK_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG CXXCPP CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE ac_ct_CC CFLAGS CC host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CXX CPPFLAGS LDFLAGS CXXFLAGS CXX LIBWNCKMM_SO_VERSION MMDOCTOOLDIR DIST_DOCTOOLS_FALSE DIST_DOCTOOLS_TRUE WNCKMM_MICRO_VERSION WNCKMM_MINOR_VERSION WNCKMM_MAJOR_VERSION WNCKMM_API_VERSION WNCKMM_VERSION WNCKMM_MODULE_NAME MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_maintainer_mode enable_dependency_tracking enable_static enable_shared with_pic enable_fast_install with_gnu_ld with_sysroot enable_libtool_lock enable_documentation ' ac_precious_vars='build_alias host_alias target_alias CXX CXXFLAGS LDFLAGS LIBS CPPFLAGS CCC CC CFLAGS CPP CXXCPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR WNCK_CFLAGS WNCK_LIBS WNCKMM_CFLAGS WNCKMM_LIBS PERL DOT DOXYGEN XSLTPROC' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures wnckmm 0.1.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/libwnckmm-1.0] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of wnckmm 0.1.1:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-documentation do not build or install the documentation Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). Some influential environment variables: CXX C++ compiler command CXXFLAGS C++ compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CC C compiler command CFLAGS C compiler flags CPP C preprocessor CXXCPP C++ preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path WNCK_CFLAGS C compiler flags for WNCK, overriding pkg-config WNCK_LIBS linker flags for WNCK, overriding pkg-config WNCKMM_CFLAGS C compiler flags for WNCKMM, overriding pkg-config WNCKMM_LIBS linker flags for WNCKMM, overriding pkg-config PERL path to Perl interpreter DOT path to dot utility DOXYGEN path to Doxygen utility XSLTPROC path to xsltproc utility Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF wnckmm configure 0.1.1 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_cxx_try_cpp LINENO # ------------------------ # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_cpp # ac_fn_cxx_try_link LINENO # ------------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_link cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by wnckmm $as_me 0.1.1, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in m4 "$srcdir"/m4; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in m4 \"$srcdir\"/m4" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ac_config_headers="$ac_config_headers config.h" am__api_version='1.14' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='libwnckmm-1.0' VERSION='0.1.1' # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar plaintar pax cpio none' # The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5 $as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; } if test $am_uid -le $am_max_uid; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } _am_tools=none fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5 $as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; } if test $am_gid -le $am_max_gid; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } _am_tools=none fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 $as_echo_n "checking how to create a ustar tar archive... " >&6; } # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_ustar-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do { echo "$as_me:$LINENO: $_am_tar --version" >&5 ($_am_tar --version) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && break done am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x ustar -w "$$tardir"' am__tar_='pax -L -x ustar -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H ustar -L' am__tar_='find "$tardir" -print | cpio -o -H ustar -L' am__untar='cpio -i -H ustar -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_ustar}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } rm -rf conftest.dir if test -s conftest.tar; then { echo "$as_me:$LINENO: $am__untar &5 ($am__untar &5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { echo "$as_me:$LINENO: cat conftest.dir/file" >&5 (cat conftest.dir/file) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } grep GrepMe conftest.dir/file >/dev/null 2>&1 && break fi done rm -rf conftest.dir if ${am_cv_prog_tar_ustar+:} false; then : $as_echo_n "(cached) " >&6 else am_cv_prog_tar_ustar=$_am_tool fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 $as_echo "$am_cv_prog_tar_ustar" >&6; } # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports GNU make features" >&5 $as_echo_n "checking whether ${MAKE-make} supports GNU make features... " >&6; } cat >conftest.make <<'_MMEOF' override reverse = $(2)$(subst ,, )$(1) override result := $(word 2,$(call reverse,success,failure)) all: ; test '$(result)' = success .PHONY: all _MMEOF if ${MAKE-make} -f conftest.make >&5 2>&5; then : mm_gnu_make=yes else mm_gnu_make=no fi rm -f conftest.make { $as_echo "$as_me:${as_lineno-$LINENO}: result: $mm_gnu_make" >&5 $as_echo "$mm_gnu_make" >&6; } if test "x$mm_gnu_make" != xyes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The GNU make program is required to build $PACKAGE_NAME. See \`config.log' for more details" "$LINENO" 5; } fi WNCKMM_MODULE_NAME='wnckmm-1.0' WNCKMM_VERSION='0.1.1' WNCKMM_API_VERSION='1.0' WNCKMM_MAJOR_VERSION=0 $as_echo "#define WNCKMM_MAJOR_VERSION 0" >>confdefs.h WNCKMM_MINOR_VERSION=1 $as_echo "#define WNCKMM_MINOR_VERSION 1" >>confdefs.h WNCKMM_MICRO_VERSION=1 $as_echo "#define WNCKMM_MICRO_VERSION 1" >>confdefs.h # Copy the mm-common .pl scripts into doc/, # and use them from there, # so we can dist them to avoid a tarball-build dependency. MMDOCTOOLDIR='${top_srcdir}/doc' if test 'xdoc' != 'x'; then DIST_DOCTOOLS_TRUE= DIST_DOCTOOLS_FALSE='#' else DIST_DOCTOOLS_TRUE='#' DIST_DOCTOOLS_FALSE= fi # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html LIBWNCKMM_SO_VERSION=1:0:1 ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 $as_echo_n "checking whether the C++ compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C++ compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 $as_echo_n "checking for C++ compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if ${ac_cv_cxx_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if ${ac_cv_prog_cxx_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CXX_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=no fi case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.2' macro_revision='1.3337' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if ${ac_cv_prog_CXXCPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu else _lt_caught_CXX_error=yes fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= compiler_needs_object_CXX=no export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_direct_absolute_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no inherit_rpath_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds reload_flag_CXX=$reload_flag reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes file_list_spec_CXX='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec_CXX='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_CXX=' ' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=yes file_list_spec_CXX='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else ld_shlibs_CXX=no fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; haiku*) archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) ld_shlibs_CXX=yes ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else ld_shlibs_CXX=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic_CXX='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) # IBM XL 8.0, 9.0 on PPC and BlueGene lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' ;; esac ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc_CXX=no else lt_cv_archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 $as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || test "$inherit_rpath_CXX" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_commands="$ac_config_commands libtool" # Only expand once: if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WNCK" >&5 $as_echo_n "checking for WNCK... " >&6; } if test -n "$WNCK_CFLAGS"; then pkg_cv_WNCK_CFLAGS="$WNCK_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "libwnck-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_WNCK_CFLAGS=`$PKG_CONFIG --cflags "libwnck-1.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$WNCK_LIBS"; then pkg_cv_WNCK_LIBS="$WNCK_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "libwnck-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_WNCK_LIBS=`$PKG_CONFIG --libs "libwnck-1.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then WNCK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libwnck-1.0" 2>&1` else WNCK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libwnck-1.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$WNCK_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (libwnck-1.0) were not met: $WNCK_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables WNCK_CFLAGS and WNCK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables WNCK_CFLAGS and WNCK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else WNCK_CFLAGS=$pkg_cv_WNCK_CFLAGS WNCK_LIBS=$pkg_cv_WNCK_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi # FIXME: the dependencies are incorrect WNCKMM_MODULES='libwnck-1.0 >= 2.30.0 gtkmm-2.4 >= 2.4.0 glibmm-2.4 >= 2.4.0' pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WNCKMM" >&5 $as_echo_n "checking for WNCKMM... " >&6; } if test -n "$WNCKMM_CFLAGS"; then pkg_cv_WNCKMM_CFLAGS="$WNCKMM_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$WNCKMM_MODULES\""; } >&5 ($PKG_CONFIG --exists --print-errors "$WNCKMM_MODULES") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_WNCKMM_CFLAGS=`$PKG_CONFIG --cflags "$WNCKMM_MODULES" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$WNCKMM_LIBS"; then pkg_cv_WNCKMM_LIBS="$WNCKMM_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$WNCKMM_MODULES\""; } >&5 ($PKG_CONFIG --exists --print-errors "$WNCKMM_MODULES") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_WNCKMM_LIBS=`$PKG_CONFIG --libs "$WNCKMM_MODULES" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then WNCKMM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$WNCKMM_MODULES" 2>&1` else WNCKMM_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$WNCKMM_MODULES" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$WNCKMM_PKG_ERRORS" >&5 as_fn_error $? "Package requirements ($WNCKMM_MODULES) were not met: $WNCKMM_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables WNCKMM_CFLAGS and WNCKMM_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables WNCKMM_CFLAGS and WNCKMM_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else WNCKMM_CFLAGS=$pkg_cv_WNCKMM_CFLAGS WNCKMM_LIBS=$pkg_cv_WNCKMM_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GMMPROC_DIR" >&5 $as_echo_n "checking for GMMPROC_DIR... " >&6; } if test -z "${GMMPROC_DIR+set}"; then : GMMPROC_DIR=`$PKG_CONFIG --variable=gmmprocdir glibmm-2.4 2>&5` if test "$?" -eq 0; then : fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMMPROC_DIR" >&5 $as_echo "$GMMPROC_DIR" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GMMPROC_EXTRA_M4_DIR" >&5 $as_echo_n "checking for GMMPROC_EXTRA_M4_DIR... " >&6; } if test -z "${GMMPROC_EXTRA_M4_DIR+set}"; then : GMMPROC_EXTRA_M4_DIR=`$PKG_CONFIG --variable=gmmprocm4dir gtkmm-2.4 pangomm-1.4 atkmm-1.6 2>&5` if test "$?" -eq 0; then : fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMMPROC_EXTRA_M4_DIR" >&5 $as_echo "$GMMPROC_EXTRA_M4_DIR" >&6; } # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $PERL in [\\/]* | ?:[\\/]*) ac_cv_path_PERL="$PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="perl" ;; esac fi PERL=$ac_cv_path_PERL if test -n "$PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5 $as_echo "$PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "dot", so it can be a program name with args. set dummy dot; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DOT+:} false; then : $as_echo_n "(cached) " >&6 else case $DOT in [\\/]* | ?:[\\/]*) ac_cv_path_DOT="$DOT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_DOT" && ac_cv_path_DOT="dot" ;; esac fi DOT=$ac_cv_path_DOT if test -n "$DOT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOT" >&5 $as_echo "$DOT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "doxygen", so it can be a program name with args. set dummy doxygen; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DOXYGEN+:} false; then : $as_echo_n "(cached) " >&6 else case $DOXYGEN in [\\/]* | ?:[\\/]*) ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_DOXYGEN" && ac_cv_path_DOXYGEN="doxygen" ;; esac fi DOXYGEN=$ac_cv_path_DOXYGEN if test -n "$DOXYGEN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5 $as_echo "$DOXYGEN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "xsltproc", so it can be a program name with args. set dummy xsltproc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XSLTPROC+:} false; then : $as_echo_n "(cached) " >&6 else case $XSLTPROC in [\\/]* | ?:[\\/]*) ac_cv_path_XSLTPROC="$XSLTPROC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_XSLTPROC" && ac_cv_path_XSLTPROC="xsltproc" ;; esac fi XSLTPROC=$ac_cv_path_XSLTPROC if test -n "$XSLTPROC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XSLTPROC" >&5 $as_echo "$XSLTPROC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Check whether --enable-documentation was given. if test "${enable_documentation+set}" = set; then : enableval=$enable_documentation; ENABLE_DOCUMENTATION=$enableval else ENABLE_DOCUMENTATION=auto fi if test "x$ENABLE_DOCUMENTATION" != xno; then : mm_err= if test "x$MMDOCTOOLDIR" = x; then : mm_err='The mm-common-util module is available, but the installation of mm-common on this machine is missing the shared documentation utilities of the GNOME C++ bindings. It may be necessary to upgrade to a more recent release of mm-common in order to build '$PACKAGE_NAME' and install the documentation.' elif test "x$PERL" = xperl; then : mm_err='Perl is required for installing the documentation.' elif test "x$USE_MAINTAINER_MODE" != xno; then : test "x$DOT" != xdot || mm_err=' dot' test "x$DOXYGEN" != xdoxygen || mm_err="$mm_err doxygen" test "x$XSLTPROC" != xxsltproc || mm_err="$mm_err xsltproc" test -z "$mm_err" || mm_err='The documentation cannot be generated because not all of the required tools are available:'$mm_err fi if test -z "$mm_err"; then : ENABLE_DOCUMENTATION=yes elif test "x$ENABLE_DOCUMENTATION" = xyes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "$mm_err See \`config.log' for more details" "$LINENO" 5; } else ENABLE_DOCUMENTATION=no; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $mm_err" >&5 $as_echo "$as_me: WARNING: $mm_err" >&2;} fi fi if test "x$ENABLE_DOCUMENTATION" = xyes; then ENABLE_DOCUMENTATION_TRUE= ENABLE_DOCUMENTATION_FALSE='#' else ENABLE_DOCUMENTATION_TRUE='#' ENABLE_DOCUMENTATION_FALSE= fi DOXYGEN_TAGFILES= DOCINSTALL_FLAGS= ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ac_config_files="$ac_config_files Makefile tools/Makefile wnck/${WNCKMM_MODULE_NAME}.pc:wnck/wnckmm.pc.in wnck/src/Makefile wnck/wnckmm/Makefile doc/Makefile doc/reference/Doxyfile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DIST_DOCTOOLS_TRUE}" && test -z "${DIST_DOCTOOLS_FALSE}"; then as_fn_error $? "conditional \"DIST_DOCTOOLS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_DOCUMENTATION_TRUE}" && test -z "${ENABLE_DOCUMENTATION_FALSE}"; then as_fn_error $? "conditional \"ENABLE_DOCUMENTATION\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by wnckmm $as_me 0.1.1, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ wnckmm config.status 0.1.1 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib \ compiler_lib_search_dirs \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ LD_CXX \ reload_flag_CXX \ compiler_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ whole_archive_flag_spec_CXX \ compiler_needs_object_CXX \ with_gnu_ld_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_separator_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ compiler_lib_search_dirs_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ prelink_cmds_CXX \ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; "wnck/${WNCKMM_MODULE_NAME}.pc") CONFIG_FILES="$CONFIG_FILES wnck/${WNCKMM_MODULE_NAME}.pc:wnck/wnckmm.pc.in" ;; "wnck/src/Makefile") CONFIG_FILES="$CONFIG_FILES wnck/src/Makefile" ;; "wnck/wnckmm/Makefile") CONFIG_FILES="$CONFIG_FILES wnck/wnckmm/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "doc/reference/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/reference/Doxyfile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="CXX " # ### BEGIN LIBTOOL CONFIG # Whether or not to build static libraries. build_old_libs=$enable_static # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects postdep_objects=$lt_postdep_objects predeps=$lt_predeps postdeps=$lt_postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" cat <<_LT_EOF >> "$ofile" # ### BEGIN LIBTOOL TAG CONFIG: CXX # The linker used to build libraries. LD=$lt_LD_CXX # How to create reloadable object files. reload_flag=$lt_reload_flag_CXX reload_cmds=$lt_reload_cmds_CXX # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX # A language specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU compiler? with_gcc=$GCC_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object_CXX # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld_CXX # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic_CXX # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath_CXX # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds_CXX # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects_CXX postdep_objects=$lt_postdep_objects_CXX predeps=$lt_predeps_CXX postdeps=$lt_postdeps_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # ### END LIBTOOL TAG CONFIG: CXX _LT_EOF ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi libwnckmm-1.0-0.1.1/doc/0000775000175000017500000000000012414127716014476 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/doc/Makefile.am0000644000175000017500000000061612257353327016537 0ustar00execexec00000000000000 include $(top_srcdir)/wnck/src/filelist.am book_name = $(PACKAGE_TARNAME) doc_input = $(addprefix $(top_srcdir)/wnck/wnckmm/,$(wnckmm_files_hg:.hg=.h)) docimagesdir = $(libdocdir)/images dist_docimages_DATA = include $(top_srcdir)/doc/doc-reference.am # These are copied here by mm-common: dist_noinst_DATA += \ doc-install.pl \ doc-postprocess.pl \ tagfile-to-devhelp2.xsl \ doxygen.css libwnckmm-1.0-0.1.1/doc/doc-postprocess.pl0000644000175000017500000000541012414017001020141 0ustar00execexec00000000000000package main; # Copyright (c) 2009 Openismus GmbH # # This file is part of mm-common. # # mm-common is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published # by the Free Software Foundation, either version 2 of the License, # or (at your option) any later version. # # mm-common is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with mm-common. If not, see . use strict; use warnings; use bytes; use File::Glob qw(:glob); use File::Spec; use Getopt::Long qw(:config no_getopt_compat no_ignore_case require_order bundling); sub path_basename ($) { my ($path) = @_; my $basename = File::Spec->splitpath($path); return $basename; } sub exit_help () { my $script_name = path_basename($0) || 'doc-postprocess.pl'; print <<"EOF"; Usage: perl $script_name [OPTION]... [PATTERN]... Post-process the Doxygen-generated HTML files matching PATTERN. Options: -?, --help display this help and exit EOF exit; } sub error (@) { my $script_name = path_basename($0); $script_name =~ s/\.[^.]*$//s if (defined $script_name); print STDERR ($script_name || 'doc-postprocess', ': ', @_, "\n"); exit 1; } GetOptions('help|?' => \&exit_help) or exit 2; foreach my $filename (map(bsd_glob($_, GLOB_NOSORT), @ARGV)) { my @buf; my $file; open($file, '<', $filename) and (@buf = <$file>) and close($file) or error('Failed to read ', path_basename($filename), ': ', $!); foreach (@buf) { if (/|)template</$1template </; } s/©/©/g; s/—/—/g; s/–/–/g; s/ *  */ /g; s/(?<=\S)\s{2,}/ /g; } # write the whole buffer back open($file, '>', $filename) and print $file (@buf) and close($file) or error('Failed to write ', path_basename($filename), ': ', $!); } exit; libwnckmm-1.0-0.1.1/doc/doc-reference.am0000644000175000017500000002111611602230200017472 0ustar00execexec00000000000000## Copyright (c) 2009 Openismus GmbH ## ## This file is part of mm-common. ## ## mm-common is free software: you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published ## by the Free Software Foundation, either version 2 of the License, ## or (at your option) any later version. ## ## mm-common is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with mm-common. If not, see . ## Parameters: book_name ## Overrides: pubdocbase, htmlrefpub, book_title, htmlref_patterns, ## doc_outdir, doc_config, doc_postprocess, doc_install, ## tagfile_to_devhelp2, doxytagfile, devhelpfile ## Files: doc_input ## Output: dist_noinst_DATA, DISTCLEANFILES, MAINTAINERCLEANFILES # The name of the sub-directory where the generated documentation # will be placed. doc_outdir ?= reference # The name of the Doxygen configuration file. doc_config ?= $(doc_outdir)/Doxyfile # The base URL where the online documentation for C++ binding modules # is located, including the trailing slash. pubdocbase ?= http://library.gnome.org/devel/ # The URL of the module's online HTML reference documentation, which # may or may not end in a trailing slash. htmlrefpub ?= $(pubdocbase)$(PACKAGE_TARNAME)/unstable/ # The title of the generated Devhelp book. book_title ?= $(PACKAGE_NAME) Reference Manual # A list of wildcard patterns matching the files from the HTML directory # generated by Doxygen which should be distributed and installed. htmlref_patterns ?= $(addprefix $(doc_outdir)/html/*.,css gif html png) # Locations of utilities shipped with glibmm. Made overridable # in case the installed utilities cannot be used for some reason. doc_postprocess ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-postprocess.pl" doc_install ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-install.pl" tagfile_to_devhelp2 ?= "$(MMDOCTOOLDIR)/tagfile-to-devhelp2.xsl" # Names of the main output files. doxytagfile ?= $(doc_outdir)/$(book_name).tag devhelpfile ?= $(doc_outdir)/$(book_name).devhelp2 # Function: $(call vpath_listall,PATTERN ...) # Get all filenames which match a PATTERN from the list. Look for files # relative to either the current directory or $(srcdir). Strip $(srcdir)/ # again before returning and remove any duplicates. vpath_srclist = $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(1)))) vpath_listall = $(sort $(wildcard $(1)) $(if $(srcdir:.=),$(vpath_srclist))) # Installation directories. libdocdir = $(datarootdir)/doc/$(book_name) referencedir = $(libdocdir)/reference htmlrefdir = $(referencedir)/html devhelpdir = $(datadir)/devhelp/books/$(book_name) if ENABLE_DOCUMENTATION doc_inst_targets = install-htmlref install-devhelp doc_inst_files = $(doxytagfile) doc_dist_files = $(devhelpfile) $(call vpath_listall,$(htmlref_patterns)) else doc_inst_targets = doc_inst_files = doc_dist_files = endif dist_reference_DATA = $(strip $(doc_inst_files)) dist_noinst_DATA = $(strip $(doc_dist_files)) DISTCLEANFILES = $(doc_outdir)/doxygen.log MAINTAINERCLEANFILES = $(doxytagfile) $(devhelpfile) $(doc_outdir)/html/* # The generic bit of the doc-install.pl command line. doc_install_cmd = $(doc_install) --verbose --mode=0644 # Transform $(datarootdir) into a URI to match MM_ARG_WITH_TAGFILE_DOC(). datarootdir_esc = $(subst $(subst ,, ),%20,$(subst \,/,$(datarootdir))) docdir_base_uri = file:///$(patsubst /%,%,$(datarootdir_esc:/=))/doc # The command and options used to install the files from the HTML reference # documentation. The $(subst) magic translates external tag references from # absolute to relative paths if the destination is on the local file system # and installed under the same prefix as the package being built. htmlref_relinst = $(subst @$(docdir_base_uri)/,@../../../,$(DOCINSTALL_FLAGS)) htmlref_install = $(doc_install_cmd) $(htmlref_relinst) # The command and options used to install the Devhelp file. devhelp_install = $(doc_install_cmd) --book-base='$(htmlrefdir:/=)' # Helper variables to replicate each pattern with a $(srcdir)/ prefix. # Also add quoting to prevent the shell from expanding the patterns. htmlref_patterns_dup = $(foreach item,$(htmlref_patterns),'$(item)' '$(srcdir)/$(item)') htmlref_patterns_quote = $(patsubst %,'%',$(htmlref_patterns)) htmlref_patterns_vpath = $(if $(srcdir:.=),$(htmlref_patterns_dup),$(htmlref_patterns_quote)) # Expand to a list of -name 'PATTERN' arguments for use with 'find'. htmlref_find_patterns = $(patsubst %,-name '%' -o,$(notdir $(htmlref_patterns))) -false # The parameters to the Doxygen-to-Devhelp XSLT script dh_xsl_params = --stringparam book_title '$(book_title)' \ --stringparam book_name '$(book_name)' \ --stringparam book_base html # Generated configuration files which, when updated, should cause the # reference documentation to be rebuilt. doc_config_deps = $(CONFIG_HEADER) $(srcdir)/$(doc_config).in $(srcdir)/Makefile.in # Regenerate the documentation automatically only in maintainer mode. # Depend on the generated configuration header files to trigger a rebuild # if a configuration value changed. The configuration header files only # have their timestamp modified when the content actually changed, which # is not the case for any other files generated by configure. if MAINTAINER_MODE doc_dependencies = $(doc_config_deps) $(doc_input) else doc_dependencies = endif # Explicitly depend on the files to be distributed or installed. all-local: $(doc_inst_files) $(doc_dist_files) # Hook up custom rules for translating references to external documentation # to the actual location at install time. install-data-local: $(doc_inst_targets) # Hook up corresponding custom uninstall rules. uninstall-local: $(addprefix un,$(doc_inst_targets)) # Install the HTML reference documentation files with just one invocation # of doc-install.pl to speed up the build process. Make use of the --glob # option, which tells it to perform filename globbing itself, like 'find'. # This helps to avoid excessively long command lines, as some platforms # have rather restrictive limits. install-htmlref: $(doc_outdir)/html/index.html @$(NORMAL_INSTALL) $(MKDIR_P) '$(DESTDIR)$(htmlrefdir)' $(htmlref_install) -t '$(DESTDIR)$(htmlrefdir)' --glob -- $(htmlref_patterns_vpath) # Delete files from the html installation directory. Avoid recursive # directory removal, and apply the same wildcard pattern as was used to # select files for installation. uninstall-htmlref: @$(NORMAL_UNINSTALL) (cd '$(DESTDIR)$(htmlrefdir)' 2>/dev/null || exit 0; \ find . -type f '(' $(htmlref_find_patterns) ')' -exec rm -f '{}' '+') -test ! -r '$(DESTDIR)$(htmlrefdir)' || rmdir '$(DESTDIR)$(htmlrefdir)' # Install the Devhelp file, translating the base path on the fly. install-devhelp: $(devhelpfile) @$(NORMAL_INSTALL) $(MKDIR_P) '$(DESTDIR)$(devhelpdir)' $(devhelp_install) -t '$(DESTDIR)$(devhelpdir)' -- $^ # Remove the installed Devhelp file and directory. uninstall-devhelp: @$(NORMAL_UNINSTALL) rm -f '$(DESTDIR)$(devhelpdir)/$(notdir $(devhelpfile))' -test ! -r '$(DESTDIR)$(devhelpdir)' || rmdir '$(DESTDIR)$(devhelpdir)' # Regenerate the Doxygen configuration file automatically. In the # top-level build directory Automake already takes care of this. ifneq ($(subdir),.) $(doc_config): $(srcdir)/$(doc_config).in $(top_builddir)/config.status $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ endif # Make sure that the documentation will always have been generated before # executing commands of a rule that depends on files in $(doc_outdir)/html/. $(doc_outdir)/html/%: | $(doxytagfile) # Run Doxygen to build the reference documentation. The generated tag file # also functions as time stamp target for the documentation as a whole. $(doxytagfile): $(doc_dependencies) | $(doc_config) -$(AM_V_at)rm -f $@ -$(AM_V_at)rm -fr $(doc_outdir)/html $(AM_V_GEN)(echo '@INCLUDE =' $(doc_config) && echo 'INPUT =' $(doc_input)) | $(DOXYGEN) - $(AM_V_at)$(doc_postprocess) '$(doc_outdir)/html/*.html' # Run XSL transformation to generate a Devhelp book from a Doxygen tag file. %.devhelp2: %.tag $(AM_V_GEN)$(XSLTPROC) $(dh_xsl_params) -o $@ $(tagfile_to_devhelp2) $< .PHONY: install-htmlref uninstall-htmlref install-devhelp uninstall-devhelp # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: libwnckmm-1.0-0.1.1/doc/doc-install.pl0000644000175000017500000001530612414017001017230 0ustar00execexec00000000000000package main; # Copyright (c) 2009 Openismus GmbH # # This file is part of mm-common. # # mm-common is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published # by the Free Software Foundation, either version 2 of the License, # or (at your option) any later version. # # mm-common is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with mm-common. If not, see . use strict; use warnings; use bytes; use File::Glob qw(:glob); use File::Spec; use Getopt::Long qw(:config no_getopt_compat no_ignore_case require_order bundling); # Globals my $message_prefix; my %tags_hash; my $book_base; my $perm_mode; my $target_dir; my $target_nodir = ''; my $expand_glob = ''; my $verbose = ''; sub path_basename ($) { my ($path) = @_; my $basename = File::Spec->splitpath($path); return $basename; } sub exit_help () { my $script_name = path_basename($0) || 'doc-install.pl'; print <<"EOF"; Usage: perl $script_name [OPTION]... [-T] SOURCE DEST or: perl $script_name [OPTION]... SOURCE... DIRECTORY or: perl $script_name [OPTION]... -t DIRECTORY SOURCE... Copy SOURCE to DEST or multiple SOURCE files to the existing DIRECTORY, while setting permission modes. For HTML files, translate references to external documentation. Mandatory arguments to long options are mandatory for short options, too. --book-base=BASEPATH use reference BASEPATH for Devhelp book -l, --tag-base=TAGFILE\@BASEPATH use BASEPATH for references from TAGFILE -m, --mode=MODE override file permission MODE (octal) -t, --target-directory=DIRECTORY copy all SOURCE arguments into DIRECTORY -T, --no-target-directory treat DEST as normal file --glob expand SOURCE as filename glob pattern -v, --verbose enable informational messages -?, --help display this help and exit EOF exit; } sub notice (@) { print($message_prefix, @_, "\n") if ($verbose); } sub warning (@) { print STDERR ($message_prefix, @_, "\n"); } sub error (@) { warning(@_); exit 1; } # Copy file to destination while translating references on the fly. # Sniff the content for the file type, as it is always read in anyway. sub install_file ($$$) { my ($in_name, $out_name, $basename) = @_; my ($in, $out, $buf); { local $/; # slurp mode: read entire file into buffer open($in, '<', $in_name) and binmode($in) and defined($buf = <$in>) and close($in) or error('Failed to read ', $basename, ': ', $!); } if (%tags_hash and $buf =~ m/\A(?> \s*)(?> (?> <[?!][^<]+ )* )\s]/sx) { my $count = 0; my $total = $buf =~ s!(?<= \s) doxygen="((?> [^:"]+)):((?> [^"]*))" # doxygen="(TAGFILE):(BASEPATH)" (?> \s+) ((?> href|src) =") \2 ((?> [^"]*)") # (href|src=")BASEPATH(RELPATH") ! $3 . ((exists $tags_hash{$1}) ? (++$count, $tags_hash{$1}) : $2) . $4 !egsx; my $change = $total ? "rewrote $count of $total" : 'no'; notice('Translating ', $basename, ' (', $change, ' references)'); } elsif (defined($book_base) and $buf =~ m/\A(?> \s*)(?> (?> <[?!][^<]+ )* ) my $change = $buf =~ s/(]*? \b base=") (?> [^"]*) (?= ")/$1$book_base/sx ? 'rewrote base path' : 'base path not set'; notice('Translating ', $basename, ' (', $change, ')'); } else { notice('Copying ', $basename); } # Avoid inheriting permissions of existing file unlink($out_name); open($out, '>', $out_name) and binmode($out) and print $out ($buf) and close($out) or error('Failed to write ', $basename, ': ', $!); chmod($perm_mode, $out_name) or warning('Failed to set ', $basename, ' permissions: ', $!); } # Split TAGFILE@BASEPATH argument into key/value pair sub split_key_value ($) { my ($mapping) = @_; my ($name, $path) = split(m'@', $mapping, 2); error('Invalid base path mapping: ', $mapping) unless (defined($name) and $name ne ''); if (defined $path) { notice('Using base path ', $path, ' for tag file ', $name); return ($name, $path); } notice('Not changing base path for tag file ', $name); return (); } # Define line leader of log messages $message_prefix = path_basename($0); $message_prefix =~ s/\.[^.]*$//s if (defined $message_prefix); $message_prefix = ($message_prefix || 'doc-install') . ': '; # Process command-line options { my @tags = (); my $mode = '0644'; GetOptions('book-base=s' => \$book_base, 'tag-base|l=s' => \@tags, 'mode|m=s' => \$mode, 'target-directory|t=s' => \$target_dir, 'no-target-directory|T' => \$target_nodir, 'glob' => \$expand_glob, 'verbose|v' => \$verbose, 'help|?' => \&exit_help) or exit 2; error('Invalid permission mode: ', $mode) unless ($mode =~ m/^[0-7]+$/s); $perm_mode = oct($mode); %tags_hash = map(split_key_value($_), @tags); } notice('Using base path ', $book_base, ' for Devhelp book') if (defined $book_base); if ($target_nodir) { error('Conflicting target directory options') if (defined $target_dir); error('Source and destination filenames expected') unless ($#ARGV == 1); error('Filename globbing requires target directory') if ($expand_glob); install_file($ARGV[0], $ARGV[1], path_basename($ARGV[1])); exit; } unless (defined $target_dir) { if (!$expand_glob and $#ARGV == 1) { my $basename = path_basename($ARGV[1]); if (defined($basename) and $basename ne '') { install_file($ARGV[0], $ARGV[1], $basename); exit; } } $target_dir = pop(@ARGV); } error('No target directory specified') unless (defined($target_dir) and $target_dir ne ''); @ARGV = map(bsd_glob($_, GLOB_NOSORT), @ARGV) if ($expand_glob); my %basename_hash = (); foreach my $in_name (@ARGV) { my $basename = path_basename($in_name); # If there are multiple files with the same base name in the list, only # the first one will be installed. This behavior makes it very easy to # implement a VPATH search for each individual file. unless (exists $basename_hash{$basename}) { $basename_hash{$basename} = undef; my $out_name = File::Spec->catfile($target_dir, $basename); install_file($in_name, $out_name, $basename); } } exit; libwnckmm-1.0-0.1.1/doc/reference/0000775000175000017500000000000012414127716016434 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/doc/reference/libwnckmm-1.0.tag0000664000175000017500000032255312414127675021426 0ustar00execexec00000000000000 wnckmmEnums wnckmm Enums and Flags a00021.html PagerDisplayMode a00021.html ga62025e8ad5baa49eb952912ca4c1a4bf @ PAGER_DISPLAY_NAME a00021.html gga62025e8ad5baa49eb952912ca4c1a4bfae7d1779200567f51215a5f6e89430c78 @ PAGER_DISPLAY_CONTENT a00021.html gga62025e8ad5baa49eb952912ca4c1a4bfaa1301311f7be5541137d611fc41cd5a4 WindowType a00021.html gafc09fd14bddb47633ce0f0c873c03a5a @ WINDOW_NORMAL a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa7473ddd8001f6398118b9ad45f858637 @ WINDOW_DESKTOP a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aadcc603879bfdae2bdb7a9708376877eb @ WINDOW_DOCK a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa667582eaa7887513eb1f5a05b9ae6484 @ WINDOW_DIALOG a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa1a43618225a733c11533e60f49061ac3 @ WINDOW_TOOLBAR a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aab81cd0d9b4a5058f373080161e81d399 @ WINDOW_MENU a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aaffdf6568ca625adaafaf243425e02147 @ WINDOW_UTILITY a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa96efe27eec0befaec5bacfdc74164ce4 @ WINDOW_SPLASHSCREEN a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa603924300cb68522bdd9ff92a9ad7fc1 WindowState a00021.html ga22305f517749f485e0172d74d35ab9f0 @ WINDOW_STATE_MINIMIZED a00021.html gga22305f517749f485e0172d74d35ab9f0a5e3643b2e424f3e6d9c4cacec13893e8 @ WINDOW_STATE_MAXIMIZED_HORIZONTALLY a00021.html gga22305f517749f485e0172d74d35ab9f0ac39344f28ea43e719e095dcf55781018 @ WINDOW_STATE_MAXIMIZED_VERTICALLY a00021.html gga22305f517749f485e0172d74d35ab9f0a3fba6fc435098c81784068658b5ec933 @ WINDOW_STATE_SHADED a00021.html gga22305f517749f485e0172d74d35ab9f0a4ff7aee054d5c745d4c6f39c31d7b8a8 @ WINDOW_STATE_SKIP_PAGER a00021.html gga22305f517749f485e0172d74d35ab9f0ab11ebc50004373097b110c747a98d6a6 @ WINDOW_STATE_SKIP_TASKLIST a00021.html gga22305f517749f485e0172d74d35ab9f0a7ce7becde85ed316c4382da5d50438ad @ WINDOW_STATE_STICKY a00021.html gga22305f517749f485e0172d74d35ab9f0a365dee25cf9259f28b0cbb90fd2dda4e @ WINDOW_STATE_HIDDEN a00021.html gga22305f517749f485e0172d74d35ab9f0a0efe2534808d0f7360981c8caf2db03b @ WINDOW_STATE_FULLSCREEN a00021.html gga22305f517749f485e0172d74d35ab9f0af45ef5b2cbc076b80ecc5562cf01fb0c @ WINDOW_STATE_DEMANDS_ATTENTION a00021.html gga22305f517749f485e0172d74d35ab9f0af8cd40e582a8dfd50d95486d10d0cc5b @ WINDOW_STATE_URGENT a00021.html gga22305f517749f485e0172d74d35ab9f0a00342aafcf568af56f1179045e4c57ef @ WINDOW_STATE_ABOVE a00021.html gga22305f517749f485e0172d74d35ab9f0ae5208f34e3e8da19f23f3e8ed5d7daaa @ WINDOW_STATE_BELOW a00021.html gga22305f517749f485e0172d74d35ab9f0ae094e96615a1d2f648b8dbb375ca2c16 WindowActions a00021.html ga4554e5bb7dcbe177c55d45c106e5ae3f @ WINDOW_ACTION_MOVE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa354275bfada4b85f73e3cdeb209102bd @ WINDOW_ACTION_RESIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fac0602212934a0f175881eac5130884d5 @ WINDOW_ACTION_SHADE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3c220b6d5b93188471f736c8f2879daf @ WINDOW_ACTION_STICK a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fae2c11c98576901ccbd9d01d913530a7f @ WINDOW_ACTION_MAXIMIZE_HORIZONTALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa896ab891a6d22ad98ff42c178ee6f67d @ WINDOW_ACTION_MAXIMIZE_VERTICALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad870b636e87aea30194797fbd39ade3e @ WINDOW_ACTION_CHANGE_WORKSPACE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad54c6ba6be26c3ee09fbce56a88135db @ WINDOW_ACTION_CLOSE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa1a39b09118e25084fc1cf5c7905acb8a @ WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3facff11c69e23432e0b3fc849eafb4c0f2 @ WINDOW_ACTION_UNMAXIMIZE_VERTICALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fae4e2090d7ef260ad50fb3d562f1d5735 @ WINDOW_ACTION_UNSHADE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faed6c72022132c6912fa110f354d2a3a5 @ WINDOW_ACTION_UNSTICK a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa38a6ec6f30e16a78a9562348ade947b0 @ WINDOW_ACTION_MINIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faae09d8b9a147219664a0506b98f30cc0 @ WINDOW_ACTION_UNMINIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faa246a84b101a90eef672fd9ba6654a2d @ WINDOW_ACTION_MAXIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3b2142dd6f0bb4fe41d2bb4ddeda5ed7 @ WINDOW_ACTION_UNMAXIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faf119a507e8da0a135542c8725d5b2e8c @ WINDOW_ACTION_FULLSCREEN a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3badbbfb5a4ce4c03b3569312baf866e @ WINDOW_ACTION_ABOVE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faed40a6f35230a45ee4564eac7b05d051 @ WINDOW_ACTION_BELOW a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad38e2327f985f43271b3def9c755bb12 WindowGravity a00021.html ga1e0e1c715ff933cda7ad971d905fca7a @ WINDOW_GRAVITY_CURRENT a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa2c32445e0fab2887df4379383ff8ef8d @ WINDOW_GRAVITY_NORTHWEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa8b8262cc0f0c74aacf41b8204263db26 @ WINDOW_GRAVITY_NORTH a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa3450459c7598dd6b6809d06849c33b4b @ WINDOW_GRAVITY_NORTHEAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa43cd181291a7e83c19ddbbfd0d99d74a @ WINDOW_GRAVITY_WEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aaa51fac9afcd31a62d1af1c3d1af804c6 @ WINDOW_GRAVITY_CENTER a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa5841b107054c9a0fd914e22f9d3d1ff7 @ WINDOW_GRAVITY_EAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa3d8077f4ed7b6a5e34e49bfbf426042a @ WINDOW_GRAVITY_SOUTHWEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa27b1b3322463590f734efd786c755239 @ WINDOW_GRAVITY_SOUTH a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa55fb1c778605892f6a4261e7af5dfbe4 @ WINDOW_GRAVITY_SOUTHEAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aaccccd8da3cd9e7d4f0fc90d9eb90cba9 @ WINDOW_GRAVITY_STATIC a00021.html gga1e0e1c715ff933cda7ad971d905fca7aad0682221d70034a2bcbc8e49cba4f412 WindowMoveResizeMask a00021.html gab6325f24c6a98ac725413e19747897e0 @ WINDOW_CHANGE_X a00021.html ggab6325f24c6a98ac725413e19747897e0a4bd34c04608c0162bbd569010807cca7 @ WINDOW_CHANGE_Y a00021.html ggab6325f24c6a98ac725413e19747897e0a9c5ee5e8617f53613b9abc4aa549d9aa @ WINDOW_CHANGE_WIDTH a00021.html ggab6325f24c6a98ac725413e19747897e0ae347219e8602dc92e40668a88366929e @ WINDOW_CHANGE_HEIGHT a00021.html ggab6325f24c6a98ac725413e19747897e0a4d6b7e6fae889f26240536d0c4f4682d MotionDirection a00021.html gabf9331c1c4adf47bb2541f987c060934 @ MOTION_UP a00021.html ggabf9331c1c4adf47bb2541f987c060934ac2d3296d40074d4787e7af10706ea830 @ MOTION_DOWN a00021.html ggabf9331c1c4adf47bb2541f987c060934a7f6600e4d4189fb51b41e4de14af1259 @ MOTION_LEFT a00021.html ggabf9331c1c4adf47bb2541f987c060934a56a0ad356bc614ec646768ed7dbbb021 @ MOTION_RIGHT a00021.html ggabf9331c1c4adf47bb2541f987c060934a1a5cfc200889357d5f51b1d16e38ddf9 WindowState operator| a00021.html gac18aa71cc6301d547df48651d2282002 (WindowState lhs, WindowState rhs) WindowState operator& a00021.html ga30f8fbe65446e9e73cea9ea103a191fa (WindowState lhs, WindowState rhs) WindowState operator^ a00021.html gad7cefe697a8d5827d435d67fd972453d (WindowState lhs, WindowState rhs) WindowState operator~ a00021.html ga1c412580d87ff685a76a7b601358253f (WindowState flags) WindowState & operator|= a00021.html gab0f88bc7fed20644c4a00c96584da6d4 (WindowState &lhs, WindowState rhs) WindowState & operator&= a00021.html ga51e6c80941660525ae7b153ddd0b742d (WindowState &lhs, WindowState rhs) WindowState & operator^= a00021.html ga9b9153faf05f953c09434e31f75dd7e5 (WindowState &lhs, WindowState rhs) WindowActions operator| a00021.html gac0919c301a5d7895b08ee7421e85726e (WindowActions lhs, WindowActions rhs) WindowActions operator& a00021.html ga105fac92a76fd5f06797ae5f18883b5c (WindowActions lhs, WindowActions rhs) WindowActions operator^ a00021.html gaf2b0380f42bb90c44f369c18acaf180d (WindowActions lhs, WindowActions rhs) WindowActions operator~ a00021.html gab4d93dc376f4facef194af49420636a3 (WindowActions flags) WindowActions & operator|= a00021.html gaca7a811fbfbccd17d3310c82f745e324 (WindowActions &lhs, WindowActions rhs) WindowActions & operator&= a00021.html gac970444847ed1ec9e1da8b81ce6bda0c (WindowActions &lhs, WindowActions rhs) WindowActions & operator^= a00021.html ga566856f713f6a18089a2c46d64f2479e (WindowActions &lhs, WindowActions rhs) WindowMoveResizeMask operator| a00021.html gad902239da470d5147f52ec22eea535bd (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator& a00021.html ga52945cc804facca81f67b1c776c1a72e (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator^ a00021.html gad62d7a441b3bff53e0bd650a3b90cf5b (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator~ a00021.html gaf1cf3571ef824c38f7cabd10b66eb575 (WindowMoveResizeMask flags) WindowMoveResizeMask & operator|= a00021.html ga4ceb354b24cbe550883353270ece3bbd (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask & operator&= a00021.html ga279f7463307562a03f5b5cce5b00d967 (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask & operator^= a00021.html ga5226568bacc1f61a1ab7cd29d98ec30e (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) Glib a00019.html Wnck a00020.html Wnck::ActionMenu Wnck::Application Wnck::ClassGroup Wnck::Pager Wnck::Screen Wnck::Selector Wnck::Tasklist Wnck::Window Wnck::Workspace PagerDisplayMode a00021.html ga62025e8ad5baa49eb952912ca4c1a4bf @ PAGER_DISPLAY_NAME a00021.html gga62025e8ad5baa49eb952912ca4c1a4bfae7d1779200567f51215a5f6e89430c78 @ PAGER_DISPLAY_CONTENT a00021.html gga62025e8ad5baa49eb952912ca4c1a4bfaa1301311f7be5541137d611fc41cd5a4 WindowType a00021.html gafc09fd14bddb47633ce0f0c873c03a5a @ WINDOW_NORMAL a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa7473ddd8001f6398118b9ad45f858637 @ WINDOW_DESKTOP a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aadcc603879bfdae2bdb7a9708376877eb @ WINDOW_DOCK a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa667582eaa7887513eb1f5a05b9ae6484 @ WINDOW_DIALOG a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa1a43618225a733c11533e60f49061ac3 @ WINDOW_TOOLBAR a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aab81cd0d9b4a5058f373080161e81d399 @ WINDOW_MENU a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aaffdf6568ca625adaafaf243425e02147 @ WINDOW_UTILITY a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa96efe27eec0befaec5bacfdc74164ce4 @ WINDOW_SPLASHSCREEN a00021.html ggafc09fd14bddb47633ce0f0c873c03a5aa603924300cb68522bdd9ff92a9ad7fc1 WindowState a00021.html ga22305f517749f485e0172d74d35ab9f0 @ WINDOW_STATE_MINIMIZED a00021.html gga22305f517749f485e0172d74d35ab9f0a5e3643b2e424f3e6d9c4cacec13893e8 @ WINDOW_STATE_MAXIMIZED_HORIZONTALLY a00021.html gga22305f517749f485e0172d74d35ab9f0ac39344f28ea43e719e095dcf55781018 @ WINDOW_STATE_MAXIMIZED_VERTICALLY a00021.html gga22305f517749f485e0172d74d35ab9f0a3fba6fc435098c81784068658b5ec933 @ WINDOW_STATE_SHADED a00021.html gga22305f517749f485e0172d74d35ab9f0a4ff7aee054d5c745d4c6f39c31d7b8a8 @ WINDOW_STATE_SKIP_PAGER a00021.html gga22305f517749f485e0172d74d35ab9f0ab11ebc50004373097b110c747a98d6a6 @ WINDOW_STATE_SKIP_TASKLIST a00021.html gga22305f517749f485e0172d74d35ab9f0a7ce7becde85ed316c4382da5d50438ad @ WINDOW_STATE_STICKY a00021.html gga22305f517749f485e0172d74d35ab9f0a365dee25cf9259f28b0cbb90fd2dda4e @ WINDOW_STATE_HIDDEN a00021.html gga22305f517749f485e0172d74d35ab9f0a0efe2534808d0f7360981c8caf2db03b @ WINDOW_STATE_FULLSCREEN a00021.html gga22305f517749f485e0172d74d35ab9f0af45ef5b2cbc076b80ecc5562cf01fb0c @ WINDOW_STATE_DEMANDS_ATTENTION a00021.html gga22305f517749f485e0172d74d35ab9f0af8cd40e582a8dfd50d95486d10d0cc5b @ WINDOW_STATE_URGENT a00021.html gga22305f517749f485e0172d74d35ab9f0a00342aafcf568af56f1179045e4c57ef @ WINDOW_STATE_ABOVE a00021.html gga22305f517749f485e0172d74d35ab9f0ae5208f34e3e8da19f23f3e8ed5d7daaa @ WINDOW_STATE_BELOW a00021.html gga22305f517749f485e0172d74d35ab9f0ae094e96615a1d2f648b8dbb375ca2c16 WindowActions a00021.html ga4554e5bb7dcbe177c55d45c106e5ae3f @ WINDOW_ACTION_MOVE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa354275bfada4b85f73e3cdeb209102bd @ WINDOW_ACTION_RESIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fac0602212934a0f175881eac5130884d5 @ WINDOW_ACTION_SHADE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3c220b6d5b93188471f736c8f2879daf @ WINDOW_ACTION_STICK a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fae2c11c98576901ccbd9d01d913530a7f @ WINDOW_ACTION_MAXIMIZE_HORIZONTALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa896ab891a6d22ad98ff42c178ee6f67d @ WINDOW_ACTION_MAXIMIZE_VERTICALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad870b636e87aea30194797fbd39ade3e @ WINDOW_ACTION_CHANGE_WORKSPACE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad54c6ba6be26c3ee09fbce56a88135db @ WINDOW_ACTION_CLOSE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa1a39b09118e25084fc1cf5c7905acb8a @ WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3facff11c69e23432e0b3fc849eafb4c0f2 @ WINDOW_ACTION_UNMAXIMIZE_VERTICALLY a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fae4e2090d7ef260ad50fb3d562f1d5735 @ WINDOW_ACTION_UNSHADE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faed6c72022132c6912fa110f354d2a3a5 @ WINDOW_ACTION_UNSTICK a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa38a6ec6f30e16a78a9562348ade947b0 @ WINDOW_ACTION_MINIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faae09d8b9a147219664a0506b98f30cc0 @ WINDOW_ACTION_UNMINIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faa246a84b101a90eef672fd9ba6654a2d @ WINDOW_ACTION_MAXIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3b2142dd6f0bb4fe41d2bb4ddeda5ed7 @ WINDOW_ACTION_UNMAXIMIZE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faf119a507e8da0a135542c8725d5b2e8c @ WINDOW_ACTION_FULLSCREEN a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fa3badbbfb5a4ce4c03b3569312baf866e @ WINDOW_ACTION_ABOVE a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3faed40a6f35230a45ee4564eac7b05d051 @ WINDOW_ACTION_BELOW a00021.html gga4554e5bb7dcbe177c55d45c106e5ae3fad38e2327f985f43271b3def9c755bb12 WindowGravity a00021.html ga1e0e1c715ff933cda7ad971d905fca7a @ WINDOW_GRAVITY_CURRENT a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa2c32445e0fab2887df4379383ff8ef8d @ WINDOW_GRAVITY_NORTHWEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa8b8262cc0f0c74aacf41b8204263db26 @ WINDOW_GRAVITY_NORTH a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa3450459c7598dd6b6809d06849c33b4b @ WINDOW_GRAVITY_NORTHEAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa43cd181291a7e83c19ddbbfd0d99d74a @ WINDOW_GRAVITY_WEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aaa51fac9afcd31a62d1af1c3d1af804c6 @ WINDOW_GRAVITY_CENTER a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa5841b107054c9a0fd914e22f9d3d1ff7 @ WINDOW_GRAVITY_EAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa3d8077f4ed7b6a5e34e49bfbf426042a @ WINDOW_GRAVITY_SOUTHWEST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa27b1b3322463590f734efd786c755239 @ WINDOW_GRAVITY_SOUTH a00021.html gga1e0e1c715ff933cda7ad971d905fca7aa55fb1c778605892f6a4261e7af5dfbe4 @ WINDOW_GRAVITY_SOUTHEAST a00021.html gga1e0e1c715ff933cda7ad971d905fca7aaccccd8da3cd9e7d4f0fc90d9eb90cba9 @ WINDOW_GRAVITY_STATIC a00021.html gga1e0e1c715ff933cda7ad971d905fca7aad0682221d70034a2bcbc8e49cba4f412 WindowMoveResizeMask a00021.html gab6325f24c6a98ac725413e19747897e0 @ WINDOW_CHANGE_X a00021.html ggab6325f24c6a98ac725413e19747897e0a4bd34c04608c0162bbd569010807cca7 @ WINDOW_CHANGE_Y a00021.html ggab6325f24c6a98ac725413e19747897e0a9c5ee5e8617f53613b9abc4aa549d9aa @ WINDOW_CHANGE_WIDTH a00021.html ggab6325f24c6a98ac725413e19747897e0ae347219e8602dc92e40668a88366929e @ WINDOW_CHANGE_HEIGHT a00021.html ggab6325f24c6a98ac725413e19747897e0a4d6b7e6fae889f26240536d0c4f4682d MotionDirection a00021.html gabf9331c1c4adf47bb2541f987c060934 @ MOTION_UP a00021.html ggabf9331c1c4adf47bb2541f987c060934ac2d3296d40074d4787e7af10706ea830 @ MOTION_DOWN a00021.html ggabf9331c1c4adf47bb2541f987c060934a7f6600e4d4189fb51b41e4de14af1259 @ MOTION_LEFT a00021.html ggabf9331c1c4adf47bb2541f987c060934a56a0ad356bc614ec646768ed7dbbb021 @ MOTION_RIGHT a00021.html ggabf9331c1c4adf47bb2541f987c060934a1a5cfc200889357d5f51b1d16e38ddf9 WindowState operator| a00021.html gac18aa71cc6301d547df48651d2282002 (WindowState lhs, WindowState rhs) WindowState operator& a00021.html ga30f8fbe65446e9e73cea9ea103a191fa (WindowState lhs, WindowState rhs) WindowState operator^ a00021.html gad7cefe697a8d5827d435d67fd972453d (WindowState lhs, WindowState rhs) WindowState operator~ a00021.html ga1c412580d87ff685a76a7b601358253f (WindowState flags) WindowState & operator|= a00021.html gab0f88bc7fed20644c4a00c96584da6d4 (WindowState &lhs, WindowState rhs) WindowState & operator&= a00021.html ga51e6c80941660525ae7b153ddd0b742d (WindowState &lhs, WindowState rhs) WindowState & operator^= a00021.html ga9b9153faf05f953c09434e31f75dd7e5 (WindowState &lhs, WindowState rhs) WindowActions operator| a00021.html gac0919c301a5d7895b08ee7421e85726e (WindowActions lhs, WindowActions rhs) WindowActions operator& a00021.html ga105fac92a76fd5f06797ae5f18883b5c (WindowActions lhs, WindowActions rhs) WindowActions operator^ a00021.html gaf2b0380f42bb90c44f369c18acaf180d (WindowActions lhs, WindowActions rhs) WindowActions operator~ a00021.html gab4d93dc376f4facef194af49420636a3 (WindowActions flags) WindowActions & operator|= a00021.html gaca7a811fbfbccd17d3310c82f745e324 (WindowActions &lhs, WindowActions rhs) WindowActions & operator&= a00021.html gac970444847ed1ec9e1da8b81ce6bda0c (WindowActions &lhs, WindowActions rhs) WindowActions & operator^= a00021.html ga566856f713f6a18089a2c46d64f2479e (WindowActions &lhs, WindowActions rhs) WindowMoveResizeMask operator| a00021.html gad902239da470d5147f52ec22eea535bd (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator& a00021.html ga52945cc804facca81f67b1c776c1a72e (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator^ a00021.html gad62d7a441b3bff53e0bd650a3b90cf5b (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask operator~ a00021.html gaf1cf3571ef824c38f7cabd10b66eb575 (WindowMoveResizeMask flags) WindowMoveResizeMask & operator|= a00021.html ga4ceb354b24cbe550883353270ece3bbd (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask & operator&= a00021.html ga279f7463307562a03f5b5cce5b00d967 (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) WindowMoveResizeMask & operator^= a00021.html ga5226568bacc1f61a1ab7cd29d98ec30e (WindowMoveResizeMask &lhs, WindowMoveResizeMask rhs) Wnck::ActionMenu a00001.html virtual ~ActionMenu a00001.html ac715e0640fef957c9dc9e8bb2836b18b () WnckActionMenu * gobj a00001.html a4dcea0421545c9e72bf1561b63b20124 () const WnckActionMenu * gobj a00001.html a119b8b6124d821f9d6f3820aa2fae605 () const ActionMenu a00001.html a72f82bf4d95b2f09a376028dd45f9ffd (const Window *window) Wnck::ActionMenu * wrap a00001.html ae911c2a07eaa8733613ebba9cccdf4de (WnckActionMenu *object, bool take_copy=false) Wnck::Application a00002.html virtual ~Application a00002.html a25fc5f5781110ca7da8980fb3b4f4724 () WnckApplication * gobj a00002.html a7225a2a99e06917329fd41895d573793 () const WnckApplication * gobj a00002.html a8256e44deaa9f5d40f11c9cbd735201c () const gulong get_xid a00002.html a1065ba119bc6da26fad069fd02c8f29c () const std::string get_name a00002.html a05eb81a962e899eff1442106bb35016b () const int get_pid a00002.html a1c8c3963b4e750a461a9ba27312f3aef () const int is_icon_fallback a00002.html a330cc38d839c81bc57db1e95a1fd675f () const Glib::RefPtr< Gdk::Pixbuf > get_icon a00002.html a595da3028c89e93854c31406988ff75d () const Glib::RefPtr< Gdk::Pixbuf > get_mini_icon a00002.html ab5330f3862bb01dec35fcd57fb02cceb () const std::string get_startup_id a00002.html a66bb354d567c58e4da65c457de8fe577 () const Glib::ListHandle< Window * > get_windows a00002.html a69d352ff0633e81c05087152a1211e54 () const int get_window_count a00002.html afcb62709e8fcc16b1e81c421129f54d8 () const Glib::SignalProxy0< void > signal_name_changed a00002.html a0bf868385beb95690d28a34ebcaf49f5 () Glib::SignalProxy0< void > signal_icon_changed a00002.html a3a0836fc0b1f3230ba24a8759aeee1ba () static GType get_type a00002.html aa42c43dbb5e60a3c07f57985174c3b1e () G_GNUC_CONST static Window * get_for_xid a00002.html ad15b5df028dc2fd77de9f00677ea7cfb (gulong xid) Application a00002.html a45056108ed25564a83f4793463db29a2 () virtual void on_name_changed a00002.html af1382a659674b41a2ba8eeea089eb99c () virtual void on_icon_changed a00002.html aae6998a2cd81bec8311dd3e8ac0086c9 () Wnck::Application * wrap a00002.html a623445fd2453da3c739cfb7ba6228865 (WnckApplication *object, bool take_copy=false) Wnck::ClassGroup a00003.html virtual ~ClassGroup a00003.html a9542349992da62382afb86cce5e54835 () WnckClassGroup * gobj a00003.html a4693a3ed1eb7db82b81451b8fe1fdbd4 () const WnckClassGroup * gobj a00003.html a0a495ed63c0cbb576b8f8e0c71bde6e3 () const std::string get_res_class a00003.html abddb9926accec430c3883180ce05fedf () const std::string get_name a00003.html aa9582bdfbfc6feb488bb8510a51782a5 () const Glib::RefPtr< Gdk::Pixbuf > get_icon a00003.html a0889a38c6d6e10eca954a69eac3ee2e6 () const Glib::RefPtr< Gdk::Pixbuf > get_mini_icon a00003.html aa857e940742729e752aa7cbeb8b76657 () const static GType get_type a00003.html a9d1a59731e23714498054f301072f804 () G_GNUC_CONST static ClassGroup * get a00003.html a1d6ee5749bc1f3a0d3e530e99fcbd3f6 (const std::string &res_class) ClassGroup a00003.html a935549a31908d4cc724801fc1ef66266 () Wnck::ClassGroup * wrap a00003.html af2f197513a299d885462dffecc1a53a7 (WnckClassGroup *object, bool take_copy=false) Wnck::Pager a00004.html virtual ~Pager a00004.html a850e0dade01f62c0c31f2abf4796b892 () WnckPager * gobj a00004.html acd83a3556b6ff37fc0bd0dd124262821 () const WnckPager * gobj a00004.html a0edb5a26df58452f519fcc7f68345396 () const Pager a00004.html a545e215280f4f2eef2d7ac4c709b12ab (const Screen *screen) bool set_orientation a00004.html a935201c4f2445524fee4db744b59fd9f (Gtk::Orientation orientation) bool set_row_count a00004.html a692147eaf1dcfb0d3fb28edc42176007 (int count) void set_display_mode a00004.html ad46730e781c12d3a097afe50c7f0c68b (PagerDisplayMode mode) void set_show_all a00004.html aa2c933538d9792a316dfd30b7d906b01 (bool show_all) void set_shadow_type a00004.html af5235e373ed963b145fd1c57d2cea178 (Gtk::ShadowType shadow_type) Wnck::Pager * wrap a00004.html a9d2bf0479ccd04dfc1327ee2268b9932 (WnckPager *object, bool take_copy=false) Wnck::Screen a00005.html virtual ~Screen a00005.html abdf5d4806335ff040540c920d2d8919b () WnckScreen * gobj a00005.html a271ad912bfba0ae875552f6bc52d7953 () const WnckScreen * gobj a00005.html ab19ec979e69d8e321eabf7e20ff501a6 () const int get_number a00005.html adabaa1d9343e7fcc806b24e71eb19b6c () const int get_width a00005.html a36d31a34dd149a3e0afc8566070360dc () const int get_height a00005.html ab97c7d8036d979f169ce9960506fe7c0 () const void force_update a00005.html aa472e64aeeb91cc2ff6e25197ce59dfd () std::string get_window_manager_name a00005.html ad0f03260d837368468b2aa007bdb4f22 () bool net_wm_supports a00005.html a81318560d318534dc0f733ffaa38867a (const std::string &atom) Window * get_active_window a00005.html a42487f8dbe7c4988e8df47617be2eea9 () const Window * get_previously_active_window a00005.html a13b0de67d2179b5048325eb9875fbe09 () const Glib::ListHandle< Window * > get_windows a00005.html a96a7aeb5274e313529d69fdac9ec26a9 () const Glib::ListHandle< Window * > get_windows_stacked a00005.html aee806ae08010e59d7d0643b41e8cd781 () const Workspace * get_active_workspace a00005.html a0d77d4e0efb7ef84ce75bc36ff80488d () const Workspace * get_workspace a00005.html a99a7102cb5e7e79f4dad463e04df610e (int workspace) const int get_workspace_count a00005.html ac701ffc190e813cba18dffbde1eac763 () const void set_workspace_count a00005.html a826af44488efe8972bc976e4de758069 (int count) const void move_viewport a00005.html a9aa8b05a7259055b1b1d5481b1a7458c (int x, int y) const gulong get_background_pixmap_xid a00005.html ad49aee6ebfc3c26cc79104e9ef796e65 () const void set_showing_desktop a00005.html a579e7a7b392585cb76e20ae51d3c7540 (bool show) const Glib::SignalProxy1< void, Window * > signal_active_window_changed a00005.html a050c6260a72885ae5824f4f26ebab10c () Glib::SignalProxy1< void, Workspace * > signal_active_workspace_changed a00005.html a5737c1f28ef1e59d19955dcd551cc204 () Glib::SignalProxy1< void, Application * > signal_application_closed a00005.html adfec906d936d771b5f373bec3613881a () Glib::SignalProxy1< void, Application * > signal_application_opened a00005.html a806a64b68a7f7fb451ab042fa3458214 () Glib::SignalProxy0< void > signal_backgroupnd_changed a00005.html a14fc6f6aa8995ec32bef64cacc203fb9 () Glib::SignalProxy1< void, ClassGroup * > signal_class_group_closed a00005.html abaeee19e421422b2c3228e62ae2af9ac () Glib::SignalProxy1< void, ClassGroup * > signal_class_group_opened a00005.html a46456cb01fc318b83cd1f79b1e62a7f7 () Glib::SignalProxy0< void > signal_showing_desktop_changed a00005.html ab92598163412d45a1068752e2ec3d934 () Glib::SignalProxy0< void > signal_viewports_changed a00005.html a1a5cfc9861e02ccf5cccaf7cf3719bf9 () Glib::SignalProxy1< void, Window * > signal_window_opened a00005.html a7a5dfd2aea7b2dbc60f11f9c2e16326c () Glib::SignalProxy1< void, Window * > signal_window_closed a00005.html aaae7446117483fd9c496c19389bf6c9e () Glib::SignalProxy0< void > signal_window_manager_changed a00005.html aa90d7b764f0abadde20eea6c193bdd5f () Glib::SignalProxy0< void > signal_window_stacking_changed a00005.html a095ccd7e05b4f7e4ad72a4354bcabf80 () Glib::SignalProxy1< void, Workspace * > signal_workspace_created a00005.html aa155cb1b06cdd4d32f239fce9c50c70e () Glib::SignalProxy1< void, Workspace * > signal_workspace_destroyed a00005.html a31a11a83ec15f1b9f5d6017ee1bcde96 () static GType get_type a00005.html a3a0942b174076c3e55107b4a30b3a039 () G_GNUC_CONST static Screen * get_default a00005.html a63c37040bc049f70a0ef51526716e42e () static Screen * get a00005.html ac6a55ac36d6c177be7e5e4b589dce743 (int index) static Screen * get_for_root a00005.html a4dbec29650911d7906532d9ff6f09918 (gulong root_id) virtual void on_active_window_changed a00005.html a620ebfd30f344756270f14e33aef58cd (Window *previously_active_window) virtual void on_active_workspace_changed a00005.html a1e262fec631935cfa28fc7ba2a160482 (Workspace *previously_active_workspace) virtual void on_application_closed a00005.html aa74e3e1b095350bc8ee43343db22d372 (Application *app) virtual void on_application_opened a00005.html aa8f6b174de08bf615fb5581cdfc78943 (Application *app) virtual void on_backgroupnd_changed a00005.html a277578d2154308ba04662068e8fffc0a () virtual void on_class_group_closed a00005.html aa790f3f4655a22fc8c607ffaeee459f4 (ClassGroup *app) virtual void on_class_group_opened a00005.html a520e7fc3ab9776ae6dfe23a0135c62d7 (ClassGroup *app) virtual void on_showing_desktop_changed a00005.html a55d565191a9828ec0c9d4f0f9369589f () virtual void on_viewports_changed a00005.html ac7e5bc7d94dfa262a4dfad07fce3f219 () virtual void on_window_opened a00005.html a15e061c94f7a3fc265e55efaa3846037 (Window *window) virtual void on_window_closed a00005.html a2e9de91f25613f3069a98be753d20fdd (Window *window) virtual void on_window_manager_changed a00005.html ab62be54675af68bd76205074ba81d5a7 () virtual void on_window_stacking_changed a00005.html ac3502ae053666403ea44321ac60a4e71 () virtual void on_workspace_created a00005.html af0432b62efa60a7231fbf98414d3093a (Workspace *workspace) virtual void on_workspace_destroyed a00005.html a391123e6ef09a77fd21216562c4c61b7 (Workspace *workspace) Wnck::Screen * wrap a00005.html a3c7632fa27faf23827db878eb483e51e (WnckScreen *object, bool take_copy=false) Wnck::Selector a00006.html virtual ~Selector a00006.html ad2dc34441251577c238e9e49b2407a76 () WnckSelector * gobj a00006.html a791060047cfdd16edba4b8c82fcb01bd () const WnckSelector * gobj a00006.html ad84edcc97cda8adccea2443b62a04fbe () const Selector a00006.html a592191f7a0d7281246eeb2076094f00e () Wnck::Selector * wrap a00006.html a79b26058841a1d8a928ce9d69ba422a8 (WnckSelector *object, bool take_copy=false) Wnck::Tasklist a00007.html virtual ~Tasklist a00007.html adb88d99208d7fa749650ae642e676fb3 () WnckTasklist * gobj a00007.html af1681bd85a9398a1cd82f2fdbbab890f () const WnckTasklist * gobj a00007.html ab7f978992eadc679bdaa0f2afe53da6c () const Wnck::Tasklist * wrap a00007.html a867fe130dd9c00fe90a1c3d89381239f (WnckTasklist *object, bool take_copy=false) Wnck::Window a00008.html virtual ~Window a00008.html a8b2e5c1fec9cf841456ca3bf6d47c100 () WnckWindow * gobj a00008.html a05e08811b3d1c33960cffd00ac59607e () const WnckWindow * gobj a00008.html aa72a39742fffeca5d610e17e4af235bd () const Screen * get_screen a00008.html adf0f3ccebddd9c0197077ee2f45a2071 () const bool has_name a00008.html a071489cc95de0153e4baa0e811bd0453 () const std::string get_name a00008.html ae9029480ba459194c9ffedeb521da3c1 () const bool has_icon_name a00008.html af05340051b5de767f77586f5059f3eaf () const std::string get_icon_name a00008.html a2a6f14148d79eef43732b4d8e7e6beb2 () const bool is_icon_fallback a00008.html ad4fc25e728c6c1dc7f7ce9ebafe5e228 () const Glib::RefPtr< Gdk::Pixbuf > get_icon a00008.html a5dc3f93aefa555fa4ee1afad60e59a9b () const Glib::RefPtr< Gdk::Pixbuf > get_mini_icon a00008.html afadbc2b8666175b6ff43f07ab5dc70e6 () const Application * get_application a00008.html ad248cd130425f72349c85b28da68ebd7 () const Window * get_transient a00008.html a9c0fafe15f6722ab6f7ff278394ea6bc () const gulong get_group_leader a00008.html a2f65b564a4032bc7c422df957229eb34 () const gulong get_xid a00008.html a5410a1b6c5bdea3bef7095e973342450 () const ClassGroup * get_class_group a00008.html ac611523106d4d2909624473e5b2e8a89 () const std::string get_session_id a00008.html ab2435e82d2b9516c9f98fd2726aa3700 () const std::string get_session_id_utf8 a00008.html a9cb0e93e0612ea34ded9bb609529efcf () const int get_pid a00008.html ab3f112ea35a8425b9fc6b86ade2ce184 () const int get_sort_order a00008.html a4700ad09d0b8f63780061f2065c0768e () const void set_sort_order a00008.html a86efcff9ee0f68fd134c6c7e33ee62d2 (int order) WindowType get_window_type a00008.html a27e4f2167e6a0293b42bc0a9df9e12a2 () const void set_window_type a00008.html a5ce00bf4ad60fd309afcd8297223540b (WindowType order) WindowState get_state a00008.html a7ff524db461f3de8401437fd72282e02 () const bool is_minimized a00008.html a5781b6db03601b0e430372454971cd70 () const bool is_maximized_horizontally a00008.html a5d17f8743607239de84e7444592e63aa () const bool is_maximized_vertically a00008.html a3edc20146f9c2c612cba2de1680e7206 () const bool is_maximized a00008.html ae699ffe56a04f961017bb2e2df1bbaa9 () const bool is_shaded a00008.html a923012d220a9be5721efe306f47befc0 () const bool is_pinned a00008.html a84ddba380366ca5339fd60002ee70e0b () const bool is_sticky a00008.html a8548e4ca1d360374841b5e8f01138319 () const bool is_above a00008.html a63c04a1956264450a60bdc87a3d8f9ae () const bool is_below a00008.html a45f78334f95db8a55e487fd73085060c () const bool is_skip_pager a00008.html a1e177490bce1941036ae99b8a66d426c () const bool is_skip_tasklist a00008.html ab2055246e84f0288463f8a08c8445c6a () const bool is_fullscreen a00008.html ad125061c1e44ff7b6a7076a53d910577 () const bool is_needs_attention a00008.html afe8ba6ea8f22d6afaea768beedbc3ada () const bool is_needs_attention_or_transient a00008.html a92322ce5a2764b239a8e8b9e42d8a03f () const WindowActions get_actions a00008.html ac9fc36950a88553687e66d4aea6bf21d () const void minimize a00008.html a86ecc6bbca8778157fa6a1c1648507eb () void unminimize a00008.html aa28f1007a555237d989dd1a567f2a3f1 (guint32 timestamp) void maximize a00008.html a8140dae74b2c7f22df1f74e1abb149be () void unmaximize a00008.html a54ffa58d8ba5de81c4f4ffaf0cc2ecb1 () void maximize_vertically a00008.html a77827fff983b995197435699f480277e () void unmaximize_vertically a00008.html ad8fc2ba654cb272c540eca14f34ac028 () void maximize_horizontally a00008.html a3cea4a939d784b8cd0ae27e176b6034c () void unmaximize_horizontally a00008.html aae87b5f3f3ff5bf4b750ed77cf6903d1 () void shade a00008.html aeefd07f06f09ace00a967b0fdf141921 () void unshade a00008.html a4257a685553317b9522c26eeb243274f () void pin a00008.html a1ebb1452dd3158188cf0998ef70aeca0 () void unpin a00008.html a3769fd6ee5cd2bc653f7d82abf0ae1c8 () void stick a00008.html a33a1350eec45025e1d975955fb9531c7 () void unstick a00008.html a81fdd8fc5c81a31129f976cfefdc09b8 () void make_above a00008.html a0f66d110a093e08182860c0295c8225b () void unmake_above a00008.html ac997f173dbfa3a9d933c0499f9e4ba16 () void make_below a00008.html a584d5fa23f08c264a59073891a480219 () void unmake_below a00008.html a9a4fa581e646d2e7cc025d09425f2dda () void set_skip_pager a00008.html ae5559fab4d3d8cf58fef3cdaf91e9925 (bool skip=true) void set_skip_tasklist a00008.html ac05120fce31990ce944e8ab0fcaffddd (bool skip=true) void set_fullscreen a00008.html a8a53cebce3e08dfbfc2bde3afa72c00b (bool fullscreen=true) void close a00008.html a3f92f075450bbba92bb3b7ab197f1983 (guint32 timestamp) Workspace * get_workspace a00008.html ace643cdf1448f4d843995bf63877dc03 () const bool is_on_workspace a00008.html aeb2e8ac43fbdd9e8d443a58a848eb3ce (const Workspace *workspace) const bool is_visible_on_workspace a00008.html a7c6c2264dd21e89b9b84ff612cd2f2f6 (const Workspace *workspace) const void move_to_workspace a00008.html a99ab8a009a2a0249b5c4519d208bc426 (const Workspace *workspace) bool is_in_viewport a00008.html ab8284bec9018756c42c4f5350f8b56ae (const Workspace *workspace) const void activate a00008.html af48119f587e96888a1d1b85bf546b129 (guint32 timestamp) bool is_active a00008.html a9d6ef3f8fe4d8143bbc466cc6a4e3986 () const bool is_most_recently_activated a00008.html acb1042dd63220544228a4822d6c09938 () const void activate_transient a00008.html a63f2e7a78337839ef3d131387453cbb4 (guint32 timestamp) bool is_transient_most_recently_activated a00008.html a188c7a24f55f82253c925b80ef5b7fbd () const void set_icon_geometry a00008.html a0910b3479ea8eb497ddb6acf6fab4f73 (int x, int y, int width, int height) void set_icon_geometry a00008.html a43a0aec5f326ce202026928f03053425 (const Gdk::Rectangle &geom) Gdk::Rectangle get_client_geometry a00008.html a27cda951d234477f965f476a24ce90ba () const Gdk::Rectangle get_geometry a00008.html af4520c3a25ad4c4fe4d803d35e63095c () const void set_geometry a00008.html ac8a485a73063d2f88b3767d3e49bd924 (WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height) void set_geometry a00008.html af222d10a15343f2e06041be683b2896e (WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle &geom) void keyboard_move a00008.html aa7138366da44649fd56f0425a998695d () void keyboard_size a00008.html a67fc8c4509894fbe40f769df7760b8d3 () Glib::SignalProxy2< void, WindowActions, WindowActions > signal_actions_changed a00008.html a680ff080d6fd66e0e6d54a00e7be8459 () Glib::SignalProxy0< void > signal_geometry_changed a00008.html a4952d0ff67781c413b76cf4d08f05638 () Glib::SignalProxy2< void, WindowState, WindowState > signal_state_changed a00008.html a1bea25e6a7f932aa124f3461dc0e1c0a () Glib::SignalProxy0< void > signal_workspace_changed a00008.html ac0c0be52107f50d2979235430a575f46 () Glib::SignalProxy0< void > signal_icon_changed a00008.html a1424e51ec1282d8d75ed4774a273d0f8 () Glib::SignalProxy0< void > signal_name_changed a00008.html a238d5339ad6d98d2df44ccc7938a8457 () static GType get_type a00008.html ac2903b3690c84bba6f39631a4507334e () G_GNUC_CONST static Window * get_for_xid a00008.html a67b3790e610b3614100877591c29b16e (gulong xid) Window a00008.html a6544324aed5f50cd84c53cabb5be3c5d () virtual void on_actions_changed a00008.html ad7492b7cfcca37b2f15e24b4301139a5 (WindowActions changed_mask, WindowActions new_state) virtual void on_geometry_changed a00008.html a96917fcf6e3226d4703d02fc9c2377e0 () virtual void on_state_changed a00008.html a31af5588e7e727a64426f65657dc7688 (WindowState changed_mask, WindowState new_state) virtual void on_workspace_changed a00008.html ac483addd4cec3b30eab4da0e868af601 () virtual void on_icon_changed a00008.html a092895f18329a1e2cfcaa6877b46b9a2 () virtual void on_name_changed a00008.html ac8aec06c62fb98080ea200ba7a1c7c6f () Wnck::Window * wrap a00008.html a27894e7c16a09b3fc2ab0b5b1461244f (WnckWindow *object, bool take_copy=false) Wnck::Workspace a00009.html virtual ~Workspace a00009.html ace1e24316f985264a3b1cdd2f0163628 () WnckWorkspace * gobj a00009.html a0c241d24b59e6be49eb6a76e190dfb1b () const WnckWorkspace * gobj a00009.html a3bd7eb4f5a38108515572e1b711f5e0b () const Screen * get_screen a00009.html ab57d08b76461b834e6441a461a47ee56 () const int get_number a00009.html a9be146546f36a12d15cc756fb96edf45 () const std::string get_name a00009.html aaa8fe6689cfaff20e50041a00087de48 () const void set_name a00009.html a1de5f14b48b58b01e5a5bfe428bff2a7 (const std::string &name) const int get_width a00009.html a2e5e49d89ff781008afc713e022469a8 () const int get_height a00009.html a34c776e86a781ded7a6a6df128e98642 () const int get_viewport_x a00009.html aec42f9d39cb248ad1f93eaff92c362fb () const int get_viewport_y a00009.html a8291c215be90e83b42a59bd1fa1fa491 () const bool is_virtual a00009.html a09875c3001488a39f6c22872a34665e7 () const int get_layout_row a00009.html a8df8c4252a90c80ad54532bda22bb8f4 () const int get_layout_column a00009.html a90c30c3f677103f11041099f0650e1ad () const Workspace * get_neighbor a00009.html a46044744f7e05ce4c9bd194d2cfbb6d1 (MotionDirection direction) const void activate a00009.html ad9e758b768ef0c09f7e76f5b14c01663 (guint32 timestamp) Glib::SignalProxy0< void > signal_name_changed a00009.html a55e8f18511fb4ea5ddb5b2bd138fcc59 () static GType get_type a00009.html a3d48a8369642eca145e8147a8ec1b08a () G_GNUC_CONST Workspace a00009.html a9796741da870908a953920f4406aac64 () virtual void on_name_changed a00009.html a4867dc3d262229cdd6a49995fc96b678 () Wnck::Workspace * wrap a00009.html af403de938c629de2c4f3c0312445677b (WnckWorkspace *object, bool take_copy=false) /home/exec/code/my/checkouts /home/exec/code/my/checkouts/ dir_ef7ec48b6be1a419d2e2d765e5d052c0.html /home/exec/code/my/checkouts/libwnckmm /home/exec/code/my/checkouts/libwnckmm /home/exec/code/my/checkouts/libwnckmm/ dir_7e277d1c8964287c2547294aeab69608.html /home/exec/code/my/checkouts/libwnckmm/wnck /home/exec/code/my/checkouts/libwnckmm/wnck /home/exec/code/my/checkouts/libwnckmm/wnck/ dir_3cb18b12474da0fbae7f60e8a2ccdbfa.html /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/ dir_0c234b14f860cd164b3c695e0b5ca907.html action-menu.h application.h class-group.h pager.h screen.h selector.h tasklist.h window.h workspace.h libwnckmm-1.0-0.1.1/doc/reference/html/0000775000175000017500000000000012414127716017400 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/doc/reference/html/functions_p.html0000664000175000017500000000742112414127675022625 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- p -

libwnckmm-1.0-0.1.1/doc/reference/html/inherit_graph_3.png0000664000175000017500000000641512414127675023165 0ustar00execexec00000000000000‰PNG  IHDRó%—‘ß bKGDÿÿÿ ½§“ ÂIDATxœí{\TÕÇg†á=¢ÊKQSBò"¾3ß‘J@éÍ=LM³R3½Q¾>>Òni×MP3ÔÐÌ)ššoQÄP@@yó8ëþ1 "Â0 JÌÝßÏç|>‡µ÷>{³×:{¯ufàˆˆÀ`0š:Ñ‚ÆÖ€Á`4 Ì™ 93ƒa"0gf0LaUR©DJJ xžo }šÎÎÎprrjl5êÅ®]»°~ýúÆVƒQG:vìˆÕ«W?!çªf³srr””Ôd ôyRPP;;;xyy5¶*õ"88gΜŸŸ_c«Â0’;wîàìÙ³¨æ#Tô3³ž¦j Ï“k×®5¶ OŸŸ¢¢¢[ †‘DEE!$$¤Ú233&sfÃD`ÎÌ`˜Ì™ áé9/p8Ç 8^X¥L›ÈÞfà8gL?_úÔ]ìÿ±CG¯×ñåá{Ð<›^ÿÿ(KÀ¼6\g]†R/ã³°µ¯¸—×#]«ªp}ñ ´úê;äù{1À®+~xtQ£à °iÚ@xJ:;0“ ÿ¿°,6 jcú?C;}4ÌÌ, 8€Í—‹óÙ¿#ââsø^-jwc3 P( P<À½Û°nØ, œ„ÝÙÿœïåùù%ؾý,æÏß žobû[,Úbp/ 2N\Dn¹QþD]àø(œy@z!¥Âêå¡hoùõã³±gB?¼wسö^Gfnî^?Œ•ƒ³±ìµ7™nú¯õ†qfs)zõ!6ò¹3ìc‘Hò €§YƒôR3œb;)¤R)¤R´pï†7>›…ÏR=ãÎ SZªÂ¾}ñ˜0a#¼½Ãðé§Qˆˆ8…¼¼âFÕ«îXÃ+ +„7ãz¹êÅ »pÑÞ½®`çÅ|°ô&bå€w€lŸ§zEñØË!hÝ÷ø _Èš9¡U{_Œ ;€»Ùñv«¿Â6õ\Q4 3‹ÑñÍQÇnFÅäÌç".BŽö_…LÿUw°wÎ xXrà81Ü^™ƒ}wË@ù{1@Úßoœ‚nœ@†A‹Î ŸðäCªú7ñPä!//yy äü}»W|ƒëAÓNÅéUÛ£,Ë—ábç—1)\Žbýµ¥}±!úsôv´†D&žv./)Q!:úÆß€æaÊ”­8vì:4-€&6#WÀAÚm$:(/#î¶@)nÄœ½úæ3Ç™]‰( Î:‡³Ý1Ì·†ÆT•Ž˜9ƒÑÖZ7&’FâË#Õ„EüÄÍöË3q$W[VõÞqTù\ †­¨é)÷_Rsæ°±·ƒØ †í¯2†êÕ¤wþ^ ŒÂñÂxLu롳ÍÒl›æV"gÏ¡óq0«üŸÝ5X̲Ó[eq›ãuÞÌß?Žˆ«ž˜0DÝÄ\ùòxógGÌ:œŒ´¤_1Uô#ÆŽ‹DÅ ¨ð4D:ák¹·¶õÅ•%sq ×ãWecã«­àààG´p•xýëÙè.¸€°à98×uNÞ¾‡Ü{·pìKw˜9¿ê¯]xs—æ!t_bÞ’Õ롨ÕZÄÆ^ÃŒÛйóøøãí8q"D­öŸ³Ü¯/Bç>x¥e&â.)À«ÒpèH>º¿Ñ ½‚üPƒJ H‹Û’Þè&Ò5ªvLK‘°x(‚7[cæ¡[ÈL¿Š-cr°"h **·V“_ Aàþ>Øvl;™VÝ0oëV„ùÙ‚«|nÓO퀳S;¡óˆ©Xüão¸t·¸’ƒaµÖSÖ¬·6qcÐß¶ Öþ}S\Ëp1l(&îuÇ‚SiȸƒIe«1:pRõﰻǠ*dggS\\\UqÍ<Œ¡þ2úðܺøIjýÎI*"žr¢““ïô÷ýòò?NÒôÖÖ4(*‡øò¦ê´ï©‹uOÚ”¡Õ]ÇÌ’öçé »©ŸMZû·FWf[~®ïÓ¶R™…Œ>û%ÊJÎ×nµÙé_Fè­·Ëâ?irKK°=»¢®21Œ<Í}huªºÞv·sçNªÆm‰ˆ¢0°„ר×!µñ…ñáp^Ñ«s|¯¿7¯òrER¶ h@(K3 X`Ž«ñ dPu¼6ïst߸GÓ4ð³9…u_ý„œÇÕ”l\=P¢©tëf¸5×ùŽwí’#<üÜc2•ʸD‹·÷u17—Á×7«-làð"ÊÇå¸?‘âˆÞN¸^yá6Ä&ÀîôxNì {ýØU7¦ê\¤äÙ£“§ý#[ˆ`k/zÔUq*¶]˜ˆ÷{FcãâßðIT Z̽hP\ ¬_(†" „ÒÌóØ± ï½·øÏk·?À°fdÕ®·õ¤æÛ¡½›ME] goÈHShÔÛîj¢A³âNc`>›õCæE7¼ýßV¢Ü™ÍìÑÚQ‚Q·ñË0‰NÆ«PX¨‚ØN èD†X[žÖä¥CQË·"-x˜A¨:OüG`ŸÿR¬Y»ý»x@Z¾îËUæ8jê×¶Ea¡'N¤#33ææfP«K~¬\[Û†ÈúðÝwßÔ±…޾#àž¹ ×gÂiä·h-ºbÖ¦ øùv òoù˜a=1¦B)\m ’^ÞÏJgì¤FQA)„6v€µ–îÇGä‹>Ó1?n 6 ’¢Æa*úïxŒFÙÖ4ì!–ξ˜¸p.Â7…ŒR;£ìÏ  0µ6½õ˜;ÀÃNW—ü¬ÀPeÉ‘ÅKà"V<˜úØ]M4lŠÏÒ ãÌ0è£Ùà]?Ç! OÚZvÆ;Áö8ó3lk>ƒœîãØòqxçpNË—£‹¡ë ¬ ¤ æ`2Æ…phÉ\UVÊ•V$Àt_@µ…·°oþB\qÁ:7ߪ,áÞ³?|ÛÙ£äÆAlZ8 §Šl0¬H Ø×ÿv­Ú«VMDrò=ìß;vœGFFÌÍ…P«kž¥‡ yŽŽ6õï¼غUY{¥*ˆ\ú£Ÿí<¬;Ûï¯ò„nÎ5‡ë‘h6wÎÚcQ»Z^R–>xw\ ø2ë[/Åh®F|€ÀÅÀš[G1Ñ€@ D®S>g#|'/Á» +ÑÓâ.bwõ Â`çÜGç®]0i¤†}ðVo CàKÍ!xp ¿.ý WێúÎ=PlŒý´Ó°ÚõæËPP¢Yù tl øÏú‘m–`ˆ$›¦­Bz×Åé"Jêüèk§ê»þ1³.f-9?ƒZäóŸ[¤®RÎ'Qäd?’ A€Zö|6]+ÒÅ&UcßÇâäbJ\3šÚˆ@yRÈ×Ë©gåxZ—"~ì¾4žÂ‹ˆ§2Jý)”|ì@€€šùŒ¡°¨C´¼¯5Ám»÷dÌm,r¹œärùò„„tú÷¿÷P§NóI&›I..ŸšHÌLD¤ _GŠ 6tèa%qñiz¯9ˆë½•²ôA¢1åK’é§i}¨µH7^¶žChîÞ;¤ªRˆˆ/8E3Ü,È{áU*-oÿí¹ÄW>'"¾PN[f%¯fBˆZR—Àtð®Jw#íÏP=ƒz+i‰¯%ÁÌ6ÞÑ_œDï÷¤–B`IƒçÒþr]ªËõƒ¡˜¹ÆýÌýû÷¯ÓB¿²¦í¢ee=š„={.#6V­–‡@ÀA£á‘˜¸¨Ñgæàà``[ ›ú-T—ýÌŒ§ÇÂBˆáÃ;cøðÎ(,TâàÁDìÙs rù]XYU“4a0žæÌÏ [[1‚ƒ{ 8¸Gc«Â0QØ®)ÃD`ÎÌ`˜Ì™ 93ƒa"0gf0L„³Ù™™™ÏS&‰R©„Xܸ?É|ZRSSÞØj0ŒäÒ¥K5–=áÌà87oÞ|¦J™ ‰¤±U¨7...ˆŽŽÆäÉ“[Fpuu­VþÄ/À F“„ýfÃT`ÎÌ`˜Ì™ 93ƒa"üÆÜDëË·s~IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/inherit_graph_0.png0000664000175000017500000000501712414127675023157 0ustar00execexec00000000000000‰PNG  IHDRõ%í8bKGDÿÿÿ ½§“ ÄIDATxœíœiX×Çß™„°„°­Èâ.ÊqA W\«HÕZwkõÞÞ«‚ÛEísÕª¶*.¹zQ ­Ô¨lZ 4"‘%¬,s?€ˆP›’6¢³`›)Bßô ç ¢¤æ¤ ±?Áwïwýi…®½7øÌñSݨ½:ÿ}4ß\ … ª³.5 a±QÃyõÁwñJ•œc¸¿ß(@CZÒƒÖÞIíŽäãˆú”•ÕEG_;{öެ…€²™·#íù/žãßcÝ“ÀCVn=Ö½_”U®bïkIù4½7ßKçÓ4Ùq·op5û¿3#=µ‡è93Æpý­¤éèBÊL¼ÿj’Ú¬ÄÇææ„%l˜TW7;–íá±ßÅeÏÁƒ×Ïœ‘ƒªMàDⓌßÛÚ Îs4œœµòÏqøO3‹Á.pœú§é›'.Cpèà ,ë}ï{[ ѽCgX¨"CëLÎŒ1ìú›<æËÙäÌWª„—Pl¹ÄK¿û}z׳Ô-ž£)‚=¶\ªðSÝ40WN¢!ªï¹+—½™Ð¡Ýsß ¶–ôèMcÏäÉ;öî½úäÉ Ÿ¥¿ˆæ¤€/²+OR~ü¾Ûê§”{¾¨ @Xs'¯ÉÄoª*5E]Ü”-Þfª‚ 4«€^!êXRŸ½yœ–íºëÔõõ­Læ¯?Nœ¸cß¾´òr…b9\ÔN4`xŒ¬Î¾ß 骼v?yž£c°CgvÊ´gVМÝIo§¨£ Ò7$Iuݵ²jnáÏsëö¯LﭢŠ¿ýÃ'è #9ë€÷¨LÚvòäêHï4åÆ]Ç<´´‹D¯ .V˜Ý”2]}ÂOÞ[Iïý½mçüà»$ÕdÇ­ÊçOS–vþgNÐñr!H“Ú£JŒÑ˼?éG~`õ¿Ä˜-ö5 tÇÄ”;:²ÊÅÒxŒ×Æã;-ïÇ߬ë®À(Žßop¥iæj«ÔÒ$fY&ˆ._.Z´(v„íØ‘ZPð Ã0‘H"‡¶~ ÅÒo*¥$ã1¿&'õ¹u°½¦Æ”Ðñõé×*ùe7‹‘ cTzŽ{#EMù±qÓ¢ZÍ0Ó7² Œ¼UÇýÙ›†Høy‘¾»_†ŸŽöÓ%(òZ°ÀÛXùõ`M·™™à¹Ü‘† :®‹í»nƱ1è(0l?: ™§jч¾²76°ðÜtxƒ‡yµJ$EjïlÊÎo#åûü ¡ØÌŸEšô°å‹Ú„‡£Åó„u%/Ún„èö¹tèk»À€H3ÒQ@ ÈÛÉ´;£¢ØüÑ„ ï?£¨¨ÊÀ`ý ÃSÓÁ,×Q³ ´íÜ•ó ûv©IóEC­žÅfPÙõæK&jt'¤_Š„¼ÒF ksžd¢$u RO¼¶òä{KVLû/3òêVžÔkb33ššZghöΆ “Ýà2pØ~ˆêËùTKcµî#• ìôÑ„Êh½c6efŒ·ùÙz~ Òܤ,×jŽñ£†DÈ hŒÒ¦ÍN¨¸èGtµ´t‘©dhª^,Á@ÔÈmªß°0[§)+«¤³SD$„BÑ@GÒéÚ7ú chC¢°Ãf¿÷(T{ª¿Iu2óDõˆ€G@ß-ˆ¾)>öt…ž§ÓÈÞ™x#EDMºzs)·Uâ ‚&lmî ªQÉ j³çBÌZÌŽ3nÍöl÷XOM)©md3oˆ=’JY3µ¼8ão·…Ént×0l?ˆZ£©Í¥ÜVÌAèª)®‘ÐŒ4‰R¤öAVÆ"˜çuC± $x®Ý,¡؈mÝc—…h¸¯û.Yw»çˆ—Yû–e²‹÷MUÑDKSÒKÂBÑkQ‡ ƒz…`e¥=w.C[{éíÛeçÎÝMK+ìì¡("÷¿¯ihPfÎÿAcOsÉhº«ú¶ãyº+˜+(Ñ}t¶îÏ£†ì²`-$eÜò0=§ kNŒÚ3gtWaÂ×A‘p¸ìæ5”¤¦Œ’è+c¶0§FD-/ˆž¦\•y.c{ð2Ïå`Œy“ boˆ]üÌ´zÌO \nÿíº8vç©ÃJ:›Û…züFûÕ|=§MM£|h%ñ«p'F¡ýC•‘1¤„Þi¯ Ø„ªýùÂt?ýõ•¢æ°7ý„[ÑæiÆ#§nxÀ8zé‡ñ-eUwÚå]±ÎVK?0Õ*|šÚú&PÃòÈ‘G%&.óõµ#PEyý(«bå?… jŒ¹6=µ6Ùr–—. cgÚªtŽª}TFÒœšÝîfú†cæ%’¿9w*̰o-B·)ökñ‘‡Ší÷w/\¸3·ëÞ¸Íý•™…¹†O×éým$èû,"¸Çîš"5,ÙÌ˶b«­{|•øµ€È4挲mŽÆ†–³â•¿ùß…UæJïª,Ѥß3Ù£G@þ×ÇZ[[ëêêök¯­å_º”á§°°ŠD"…âÉ“G§¦~û©õ°X¬ÐÐP¹~ºý<è^Ûw¡ò‡Õ'r†žžFx¸kx¸keåË‹œ?ϡӵe- G–(”¿{11ÑY¿Þ{ýzoY Á‘1òZªâà| pã(2¸¿qÜß8Š îoEFÊû@ ÿñ#‡ÄÄÄÈZÂçNyy¹©©iß–þþ&“É<¯¥¥äA”••e­â5†††!""BÖBp`úôé}wû¿ÄÁQ$ðúG‘Áý£ÈàþÆQdpã(2ÿ71ã7ƒ¬c(IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00028.html0000664000175000017500000000710612414127675021110 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Tasklist Member List

This is the complete list of members for Wnck::Tasklist, including all inherited members.

gobj()Wnck::Tasklistinline
gobj() const Wnck::Tasklistinline
wrap(WnckTasklist* object, bool take_copy=false)Wnck::Tasklistrelated
~Tasklist()Wnck::Tasklistvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_g.html0000664000175000017500000002606712414127675023636 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- g -

libwnckmm-1.0-0.1.1/doc/reference/html/a00024.html0000664000175000017500000001244612414127675021107 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::ClassGroup Member List

This is the complete list of members for Wnck::ClassGroup, including all inherited members.

ClassGroup()Wnck::ClassGroupprotected
get(const std::string& res_class)Wnck::ClassGroupstatic
get_icon() const Wnck::ClassGroup
get_mini_icon() const Wnck::ClassGroup
get_name() const Wnck::ClassGroup
get_res_class() const Wnck::ClassGroup
get_type() G_GNUC_CONSTWnck::ClassGroupstatic
gobj()Wnck::ClassGroupinline
gobj() const Wnck::ClassGroupinline
wrap(WnckClassGroup* object, bool take_copy=false)Wnck::ClassGrouprelated
~ClassGroup()Wnck::ClassGroupvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/a00023.html0000664000175000017500000001673612414127675021114 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Application Member List
libwnckmm-1.0-0.1.1/doc/reference/html/hierarchy.html0000664000175000017500000001546012414127675022256 0ustar00execexec00000000000000 wnckmm: Class Hierarchy
Class Hierarchy

Go to the graphical class hierarchy

This inheritance list is sorted roughly, but not completely, alphabetically:
[detail level 12]
oCObject
|oCWnck::ApplicationThis represents an application
|oCWnck::ClassGroupThis represents a class group
|oCWnck::ScreenThis represents a screen
|oCWnck::WindowThis represents a workspace
|\CWnck::WorkspaceThis represents a workspace
oCContainer
|\CWnck::TasklistThis represents a tasklist
oCMenu
|\CWnck::ActionMenuThis represents an action menu
oCMenuBar
|\CWnck::SelectorThis represents a workspace
\CWidget
 \CWnck::PagerThis represents a pager
libwnckmm-1.0-0.1.1/doc/reference/html/graph_legend.png0000664000175000017500000005101112414127675022527 0ustar00execexec00000000000000‰PNG  IHDRŸÛ+¾ú[bKGDÿÿÿ ½§“ IDATxœìÝw\Uõÿð×¹÷²dƒ ÈŠ81\Š€©¹*…~fšæ·V¦™f©}sUîœiîQŠåT†;\ QÙ².îøüþ Ù ÜÃ…÷óñ ¼ëœ÷=Ÿó9ç}Ïù Ž1Æ@!„BHÃ;)à;B!„Ò|PòI!„B†’OB!„¢0”|B!„…UûŽyó€ÇJdclÞÌw„Bš°yóæá1§Œºº:¶mÛ ¾Ci2¸j{»sЯ`n® šˆØXàÖ-€ „Ò€8ŽC¿~ý`NçéqòäI?~îîî|‡ÒTœ¬þÊ',\ÐF¯'¾£ „Ò ,\¸’£Âqß!49Ôæ“B!„( %Ÿ„B!Da(ù$„B! CÉ'!„BQ˜úM>Å^pæ8pþµÁÜ;yõº:…{ÁYÇ;bd|GB!„Ôïçi±œÕë°®¦œc435ëí^S:#ðwz$ @æyŒêølÎßúÞ'„†¶F½®ŽB!µ£´çiÊ1šŒúM>9hééý[ ê:úÐ×o$;„Ø ÎæßÃ=ä.<-„|GC!„(\£>OW¥±ç¤ÆÛæSìg}'ì>¹ 5á°ýw .}+»ô­m±œõbëOôÖãÀ Làºê&Ä @a Î,ŠöšE—Ûõ:Äw—!…i×7b‚½)4Š/Å«·éƒ)»B“ág½±¸–u³,í‹ÖQ ¯Å®°ÒàÀqê°tYŒ³qËÆÎɽ`Èqà4ÚcôºÛ˺µ!„Ūâ¼Xt^îõ›¦ §Žk‰þ OÁϧè®ËãtÐcÚqÄJ_¿w~ÙቾF‚¢e¹.Á¹i ‚`(HMBö[œseY‰H/¬ûçIÃR|‡£¬,ù_:¦ž}ˆ3ê£Ê¡[³®ãûýFX’†ÈÃNx°f οÊÃÃÕÃà~@ .F"!æþø ëÆ{âB¬p_ŒÛvëð"¯#qå»¶8¿`.þ.«g0X»¶Gß…§…!kßÃGG ñå¥pD…ýYª{1áãýˆ‘fãÆ×Ãñù+|øñw ·ÿ¯¸Ÿ£¨D!„(ZAçÅâ·ˆoáÇl±ãI:"¸ â×ñxï¨-v†§#òÈpÄí]†ÝO ŠÞ›y_¬IÁ¤¿"z ³6áC÷]x!©dõ,Ñ×váËѶ0í¿!ùuÿ&97çÃÖÌËáv"e¡ ½ÝÕÑÿûÿaªC©W7k€,]„!fúh?Ì]U²‘ñ»÷¾@¿ Û1Û±=LÌ»aôê@$Çü¡­ßÁÚ°t„lÿï´m…–­¬Ð½oO´”‹‘ž_æ'TÞ#ìÚõÙŠYNÖ°´qÿýë }ðº‡}'Sà´qf9X¡õP,ÙþÚ©4ØF!„BøUÕy1¹ø*2ÀèåžèßZ¯è¼,2ÀßÍúï±j.Òs_Ÿo…´n+<;À¢ËH¬ØµmîìÆ¹ø7¯~²œçðݱ#lÌ1àk?hyìCpðfôkQ÷¯¢3ôžÞ^çœcø´‹)zŒûnÄ£€f¼nê·ÍgMõ`i¬^ñkeçAéÁ¼¥ZÑ¿BpÉ+¹€3¿D`v>Ò³‹why2s%`š=ñ™»..,ø‡ƒbsGçö@«Þ«"ìŽ)Æðûr.vÞŒÂËHl˜¿‘”|Biªª:/ÔayL†k_ÌÅÎëÏ÷ä<ÖÌ܈ØÞÓ0Òü¿äS«Û4l»ò 1¾ËÐ3n'>loû +qøN"Þæ”Ëòbðû7×Ë 6"}ÀjøG…áÜz·X*©/ü&ŸÚøaÍP¼XÐ&£áÕy:úiU÷!MôYs Þ‰‡´‡‰© ÆíWÇœã‡ð±õ@¬ÚüÈYÕf†Æè5i/²Õõ3!ŠÂ1V¶¡eÙwpÀñ〻»‚Bj"Nœ<<Ê·c%„BêÇq8~ü8ÜÓyZìçVžèêÿ [ú(÷8œrû*·“4·;!„BQÅ÷v'„BHÓ¦;WóÇði¤èÊ'!„BQJ> !„BˆÂPòI!„B†’OB!„¢0”|B!„…©Yow__ #£C©½œÂ¢I»4UaÄw„Bš ___d4ÂótE4¸Lä1m4è{sU}òinìÚ¥€Pjo¶þhp~O?Ëw(³°à;B!Mœ¹¹9v5ÒótYz-€¸­À´ÝÀ±›|GS3B¡¦¦¦|‡Ñ¤T?ÃQ#•’’^½Vàððá00Ðä;$B!„T%r7pgÐjàâËw4„Ê;ÃÑ… ðú’ýùóø †B!Õ‹:\ôÿ¤k@Á+^C!üQÚäóøñ;`ŒA.g8~üßáB!¤*¹ñÀ+ÿ¢ @ô1~ã!¼QÊä366 ÷ïÇ@.g`LŽ{÷¢›ÆwX„B©LÌq€+îj"—Ïÿà7Â¥L>ÿþûD¢×¡s‰øûï¼ÆD!„*ÃÑøÆþËCDD"ÂÃù ŒB!‹: Tß|ŽI€ø‰‡ðJé’O/¯ûPQ–{^UUˆ³gïó!„Bªôâ /,ÿ|f8¬øx¯”*ùdŒáäÉ»Hdå^+,”áĉ»PÒaK !„¦)í^åm;ª@ôQÅÆCx§TÉ烱ˆO¯ôõøøt<|«Àˆ!„R¥è n¹¿&/,ꈺpÔœ(UòyæÌ½ o¹¿¦ª*Ä™3÷!„B*ÅäÀ‹ƒßr-/H¹¥¸˜ï”&ù”Éä8uªâ[î¯ÊpêÔ¿Éä ŒŒB!zä'UýJQ‡$Òl(Mò…ôô\¨¨ ª*ªðOEE€´´Ü»Íw¸„B‰ý«èÿµÊÿ˜¬hzÒlˆø ¦:th…eËF¾ñ\`àSÀÀßx¾}{c…ÅE!„JX¸mÞ|îÙ Õ@«ÝÏ©µTl\„WSâîá3g¶sçdž#!„BHá€Ç‹SÒTšÛî„B!DùQòI!„B†’OB!„¢0”|B!„…¡ä“B!„( %Ÿ„B!Da”fœOB!„4C¼½n|GAxDÉ'!„B§µ+ßžÑmwB!„¢0”|B!„…¡ä“B!WÚ)8iÛaGŒŒïHH=¡6Ÿ„Bi¼´úàÛ=«aeH×Ëš *IB!„4^ªê15¹ªß'ö‚³]!U”|B!¤`(HMB¶¼ÌÓ¥“J±œõbëOôÖãÀ Làºê&Ä^pÖ‹kY÷1ËÒ¾\*ËJDz¡â¾ ©%Ÿ„BQœ+n@²ßY¢¯í—£maÚ5Bò«ù|Öu|¿ßëCÒyØ Ö,ÁùÂѸšqƒµ{a{ô]xZßøHÎÍù°5³ƒÇòC¸HY(ß(ù$„Bˆâ$úùI`9Ïá»cFؘcÀ×~Ðò؇ààÍè×¢ºh`ÀÒEb¦öÃ<ÐU% ùe/—¾Igè1<½½Î9ÇðiSô÷ ܈G«·oEj’OB!„(TÊÕ]èÒº¾ 2ÃÌSO}û0V~Ü&jÕ´ë‘Ì[ªý[ Wƒ4­\ðùÏÿ ,á¶ŽãôÔÎhõÎbÜÉ}›oBê‚’OB!„(”ºI ±×Æ“Kgpæo_„¤Jjõùš%œ‘ åñ-\ǃt38 é c÷Gá(ù$„BˆBiu‚mWž!ÆwzÆíćíÍa?a%ßIÄ[µÈ” 3W‚²wÓY^,~ÿãz™ÁfâA¤X ÿ¨0œ[ﶪo³BR”|B!„h[ÇümÞx?:¤ãèâÕ¸•]ÇÅ©·‡[×XÒuöŽÙÛ]|õk,=+È-Aˆ 9‹õÓÁB£Î—OÉ[âcJÛÜvæÌ€;'ó !„Bjä <X¸ó áÇIºòI!„B†šÙB!Dq†xzÝøŽ‚ðˆ’OB!„(NkW¾# <£Ûî„B!Da(ù$„B! CÉ'!„BQJ> !„BˆÂPòI!„B†’OB!„¢0”|B!Dq®¸É~|GAxDÉ'!„B'ÑÈOâ; Â#J> !„BˆÂPòI!„B†’OB!„¢0”|B!„…¡ä“B!„( %Ÿ„B!DaD|@!„fdˆ7 ×ï((ù$„Bˆâ´vå;Â3ºíN!„B†’OB!„¢0”|B!„…¡ä“B!„( %Ÿ„B!Da(ù$„B! CÉ'!„BçŠìÇw„G”|B!Dq}€ü$¾£ <¢ä“B!„( Çc¥ŸX¼x1Ö¯_ÏW<µ"êd21Ï‘ÔÌW_}…uëÖ5Øò•©ìš;UUU\¹r ²|+++DEE5Ȳɛ¬¬¬ðüùóY¶X,ÆÃ‡!—Ëdù¤aôèѺºº ¶e®ã½­€çÉ@zß‘Ô^C»å.Û²*9>ž,7½fTTúõë‡E‹)&²fâçŸnð‰ÊNy¸»»#>>¾Á–…… ¢ÿþ ¶ܼy¿üòKƒ-¿  r¹¶¶¶ ¶RÿBCCQPPРë :Ά>vM§l«:>V8·»¹¹9Æß A57'OžTÈz¨ìÈkýúõ£}¡•¹qÔ`ŒŒŒ²¢\¨Ž7]M¡l«:>R›OB!„¢0”|B!„…¡ä“B!„( %Ÿ„B!DaÞ:ùtæ8poü©Â´ÿL윋j›â‹½à¬c‡1²Š_Soƒ¹wò€´SpÒ®ä}e?S. mÇà»K‰ÖõK6aoU~Qé}Šö‡«õ~PÓ:Y¨k®ôq³&Ï×dy•£›ƒ&ôýËס×uØ/ꢮû "5Jª^ë|eê¹.¼ý•OÕV˜æ´´4¤¥¥âeøE|aô'¦ŒXŽëkÖêƒo÷¬†«a Â-Oâ‹»ømx,~úp þL¢±òÊQDùñ‰ö‡š©í~P›:ÙñQ9R;§§ÕŸ¨CpP)UŸÒŸ`}o ¾Ã«œ¢5D!Þ¾49Ôuô¡¯¯}}´¶‚ù[~@¯„³8÷¼žÆ9SµÀPè¨ÉÕ:žVm{cÜ×_âéÜYX?ñ4%õY~õõ˨>aÑþP3µÝjS'+RÛ2¦r$uÕ„®^¾ -½âú£§A©ú¤§u!ßÑU¡¦Ç*g¥Ò0?%„*2 ¥(¿C”}Ì ðüÈLØ·äÀqê°ò%ÎÄ–9™”þLa Î,ŠöšE· ô:Äw—KÝzcräg¦#==ééiH޾‡?×ýŒÇVãñAGU¤]߈ ö¦Ð(¾å Þ¦¦ì AR®­ÁÝ¢Û:6ø`ÈócáµØVÅ1º,ÆÙ8IƒlºF¡lùé;a÷É¥h¨ ‡í~88Û¦ª8N †-Ã…—Ò¢÷éŵ¬û˜ei_\VUl·Êʱ–ËaÙÁØ9¹ 9œF{Œ^wâÒÂh¨»ªöƒ_w`Žv¼ˆÁ~ǰü"ùÅ“FmÃ;-:ã˽ÿ«xÛfÔr_¨ë“Ø Îú±u'zëqà&p]ubVM}Ê{ŠÃÕ} êãrU籜õûcý¦)è©ÇãZ¢ÿÂSðßó)ºërà8ô˜v±RT½Töj¹¯U{ÖO]¨âøxâí“Ï N BË÷ØO7Ò™ìõ¨êÀ£jÄ>óÏ*Y^Þý%¬­°+Ûtª|òùä:›ÝF9þ‘P´lÆ“°ÌŒL–/cxeÙÏØ™Yíg8‰ùŠ%,;CÌrK¶ŒeÝ_ú¨Ç“éÍÆé¨³[³\9cL^Ȳ^ú°é&šÌõD2“Jµ•õÒìÇöÅ—DQ­F›|Ö¤ü„êì½³iŒåÜ`3[k0ç£I%Û??xë Òƒm~.y³lsï°¹f•l·ÈÕ—cM–áǦ©1§RËÉô-k§Rjÿj¤ûC£K>k³¼~\\F²—‡Ø`­lÙ£|Æ$ÏØ&;]æ°çWµmkZÆñ²F]ŽÊ›|j°Ñÿ¤½–ö'¤Õ‹m\E}zXyÝ«Áq¹ªs€Š›ä—]‹“¨ÌcU6Ç? ú}¤¢ïT›}íi5Ç“ZPªä³&õ¯&eôzßÙàÉÿmÃK™•JO¶åÁ©7Ö+Ï~Æ|¶ÏgÃ;²6}&°ïÝd ùrVN¹ä³å\Žœe?÷a;¾Ç:ë·dÝ?\Êö_c­®:J™|ÖöXݹµ†ªJ>+œ^³VT[aÚ¹{X×[J hk©V~?¿ìtKª&èn¦^òPÝÜæ¢ÃˆÏ¨à2}á+8Ý_4‡Jê¥Ê·miU•qR!ЮüG¨+WaË8ÆÞ|E¤ó–jEÿÁqd•×'iu?9±vÇå²çtÔ%±„es$ÉÕï#}§²ªÚ×^¦ÔúxÒ$Ô¤þÕ¤Œ^¢“•öÛÐÜf‚Cx‘úúœ.GÊùpôø zK°äÔS¼×U¿â¹¾+R“r.‡ƒ¦• >ÿÙ3ŒEà‘mØ8µ3ækz"#h]M×ÜhU[çk{ ¬Ã¹µ¶ê¹Ã‘t+J<ƒL^tÀ‘¦Ç ­t³ªÂ—x—_ò° þâåFhßR¥üºTôa¡‰§1Ù(izÀ$Èg"¿Š6ÆŒÉ ‡¢ü[Xäð6Äv‡çöËxœ’‰¿oѽ¤£Ÿ ÌÇoÃÝ´4Dž_̓ð͇ž¸&ÕÄØóé`ŒýÉ ™Š{*ï ªDMÊãŠ.*°Ò)Úþ¯O…/CðR®sý2‡‘Ì õ*Þnö&5/Ç*—c +1ž<Ë,YNAB0ªëBûCj³”%0‚Ëô¾H>~WN@¼ã ÕºSͶ-¥ª2®b›R9V@¨S­,D%æ½1D–$9Ieêi¹“¶È°òú$ª¢î·lY}}®êP£ï¥[£}¤ÚD¤ª}ÍΤNÇ¥WÇúW)i*Â_dý· ã"AVzßã nÞCìµñäÒœùÛ!©µÛ!j–pVD‚”Ç·pÒÍà0¤w]Ô¨T_çky ¬ã¹µ6~ìA è žâÌ…p¤§=ÆÉ5[ð(¿Ôë’W84w9þ ‰G|¨V|ö3^ôÄHÓ ºßµè‰i·‚ߢ¹Øyý9žàòn0i=Ç_w`*Ý1!)1wq`éxÐf4FYY…hÛo0úvÔEî“ Ø8óKfç#=[äÜÆüŽú°[~ÌÊNma jFêႯq8(I1÷ptn´ê½ !õÔ™_i´è©ZÁïË/°ÿn žzcÝ숱û #Í‹,òdæJÀ4{â3wÝŠ·›°åX£åtÇcø}9;oFáe¤6ÌߌÈÒ„öÀhÈtôÿó×½„ëìA0`Uo[ feüz›R9ÖŒ¦fN0ÄÅY3ñëåPÄ¿J‹ÛGðõÄïÕ6Ƶ­àGýkÝ*¯OÝ+¯ûÖ½«®ÏÕjB£{õûHUêëxÒÕ¤þÕ“áÚs±óú3Ä=9537"¶÷´ÿÎà Õm¶]y†ßeè·¶7‡ý„•8|'oµ¹_—sÙòbðû7×Ë 6"}ÀjøG…áÜz·Y[£Qm¯í1Pu¡ìø·ëpT‘¼å}ÖN ª˜Çúµ¬_é6z}ÙO'³î:`€k7|»œ(-ßF©¸-‡<7œšíÈÌT‹Ú¥iwx—-ñŠe…ŒUÚ1A¿ç$¶+8›ÉY{~h*ë¡X˰'.²µNš –óØí\ ‹;=Ÿ l£RôYƒlâŽG,3;ŒíŸÙŸ™ˆÀkÝo:ÛšÍjÓ\¤Ñ¶ù¬®üÊ´’焱ßgôc­EEåe5t û'®°è½ùÁlM_ a¶'VÊä9•o·*˱6ËÉf»?µc†Ô­™ÇÚÿ±¾¥÷¯Fº? ±µù¬å~P®}•üûs¸:C«,0›1VݶM¯y7ærltm>c,?ŠY6Šu5}_ æ0u+»VÜz«Š²¬ª>UU÷«¬ÏÕÊÆRÉãj÷‘ÊöÏú:žÔ‚Rµùd¬öÛ¶²ÇgØ`5#öÁòÙÌÉDÀfæü;WXy{dƘ,;’]Þ:½7h6óË*óbÙ6Ÿ5,çÒÒÏýs»˜í ˆeyuhçYZC»ë´Žêê<«ý1°>êBUm>¹â/ZÂÝÝpâĉzLq‰"¶+•òà8Ç/)3e[>)râÄ xxx€•mÇXO’““†Áƒ7ÈòIøvíºtéccã[G£¬ãb/8·òDWÿgØÒ§\ÿ±ÝeÙÖAÇÇ“4e!„BQ˜·ïíN!„¢;WóÇðQtå“B!„( ]ù$„B©GÒ9îlЇL ÒBˆƒª¶!UM!ªDê¨h   ª%„@¨j ¡§Òpm… J> !„Bê‘\Âv*` ¡ Eƒ¾s`` `r€É+®ÛÈ^Æ)6`£Ûî„B!õHUK“žš8È$rÈ% r‰2 ƒ\Ê*L<9À 8x%ì€ÓyP IDAT€°µ28\=J>œœ$%‰™Œû÷c¤¤L¾Ã"„BHY¹éƒãj6 ›@h«bÌN8—¸¨áç”U…·Ýýýýáææ¦èXšœìl-äähA& -M ƒV9òWdfæ!;»YYùÈÍ-¬pŒ@ww{üúë„Z¯“Ê®v¤œñ:ñP‘©@M¦u™:Ô¤jÉ•¿EÊêÕ«±{÷n¾Ã¨7zyyÉåHÑÔä;”III YÏDzžúƒŸß têdm¾Ãi²ê£ŽËdH¥ªJEHDJEÐÒʺz^=EÙ|YÒÃõµ±U¿©xªÐ¶Îúp\nUÍ¢Ù›Âñ»ªãc¹3ìøñã4˜æ$#C))E^Àéé@zztï,j òÇqèÛ·]­×GeW{ÙÂl<×|÷æ¤òB&„:S‡¦\-X ´·€†\L-ä- .W‡S«óz?úè#ôíÛ÷mïԢE‹[ÍAOÉXfdÀ8!¯Z·F´•˜€ÿ7úúú úcOGGÆÆÆ 6ˆ}CHKËúu×E‹an®ÏwH gll ]Guu\&ãPP Ba¡……ÂRäç !‘ý›±ò¥kkg@_?§!ÃWZ59v§?ÏG´büÅPÑB’'C¹9?D8püÖG”<ßTŽßUËÍpDê×ß?À¢EÇQPP©T^£Ïp‡û÷¿‡±1]1P„«O®bø¦áÈ%ËË—‘H(‚P „L&ƒT.-y¾¥VKĬ‹†JӜɣ±yvù2NO™Ðo×cöìAËNxŽŠ”véRæÏ?‚¬¬|0Æp÷î ˜š6¿ä³1pwßÀÀ€@ÀA$*J4¥R)*;ësðÕWñ`ÁPFªüä2†ÄûÙˆñ#ÚOŒÌ¸h¨ÀÂI2‰Ï/e@.}s£ D´MÕà¶¡ôÛ©ó9oh†£†6jTO\»¶½zYB (ÿ ³,Žãй³ %ž äÜÙæ_€ªP"aùÛíR™’‚7O@€6zm .jv ÞX ¨¨|Ä118àêŠ7‚Uðƒ(–Xœ‹éÓ÷cÊ”}ÈÌ,J<;vlE‰'\]»”œsär†ÂB$’ªOË–¢Ä³–䆣ÃCpnæSÄÝÊB;7}ŒÙß _ê§å–èñIë7O®ø?6უ›câ €:)„©©>þúk–.}B¡Baå›]$€ã€3gî!=n{(Šsggø~á 5‘„aµï—ËåøaÌà¸êPú¡Ò¢Ú¼óÀqK¥`r9nþò N¸»#[Am/Iy7o>àAkqéR0Šî-2¨¨ˆ0lX7¾CkÖ>ù¤?´µk–Øp°nÝxÌš5¤£jz*–šã£³]1î„ ìç´q7MpŧyƒhÑR Tá PÀñ Xl‘ZóMÁšï7W0¡P€Ù³]pöì|´i£•ЉD†ÂB)fÏ>„îÝW`Ô¨Møõ×ËŽSªv_Êh@û¸¼ð2ÔUÔ«L@…!lZÛ`tÑ ŒŽ@;„ÿ• c ñwïb¿³3žùøðYó#‘Ȱ|ùiŒ· ))Yo4+’H¤pq±á1:¢¡¡ŠiÓA$ªê4ÏA à°uë'øøãþ ‹M™dÆ ÷•¤Ê÷´uÖƒ¶©jÅ/r€•‹@³µ*Æê„δ¬ï0•µùäAvvV®<ƒ£GoÀI¥ŽŽ:BC× ?_‚7"áí Ÿ0$&Š¡§×ŽŽÖpt´†›[´j¥Ë×WhÒn>» ·_ÜÊÝjã8|õîWXûáZ¢kÞ^=~Œ®®å_Æ`7e -_¡j%'R/ž=KÆÌ™ðäIb…í¤µµÕ¶¦Ê»<¤aÉå §Oá‹/Ž£°°¢ãJÏ1czñaãÄä@rHbüĈöÏ@úó|ôži»&u^fflžžOCI­ Ò :à$%Ÿ<:wî!.<Šü|)¤R„B!FîmÛ>)÷ÞððDøø„Âß?7oFB*•ÃÚº5ÜÜláädþý;Tó —ÔFe ¨€@[]â<1ì,ìðÍ{ßàý^ïCÀѶWư½{w䦥Uø²@$‚ž¥%FïÚ…–;+8¸¦1†½{°jÕYÈå 2YùÄS(`ÄˆîØ¹s2‰D†?ÿüÛ·_Áóç¯Ð³§‚ƒã ‘ü7¢Ç]ñܾýŒÕ“Çhi¾ñ·²ÿLä¥I c®ËAº°tÒCë^šàjÐgƒÔ%Ÿ|‹ŠJÁ¬Y $$2æM0nÜ;U~&==OoïP$%eÂÀ@áèh¡C»R‡¥zP’€J •% N€ŸìÄàNƒ±þÒzì Ü3}3,p[€N3¨ç»œŸ7ágÏB&©øV˜@$‚@EC×®E—?TptMWff>.<Š Uù>€ÃÏ?ÿÜÝíŠÎ ûöà÷ß‘—'Á„ ý0cÆ …ôí»ªä‡‚@ÀA `ïÞ)ps³å9êÆ!éQþ™³~:°tÒ…Yh™ÐÝ“DÉgc •ÊñË/—ðÇ7àç·5D[.g ‰C@@._EPP8Žƒ­­iÉíy{{+êSG~~öë0HeRȘ FÚFˆþ)ê*E ù£R£ð‹÷/Øí¿ÚêÚð쉅n ¡«AM"ÊãÓ§q~îܪÛ@sE'ØYÁÁP×¥²¨W®<ÆÄ‰»Àq\•Ûžã8VprjÚ3fËw#Ñ~bÄÞ£ Sƒò?«f;¦f#DÉgs’’’«WÃÇ' ~~O™™##m Ô nn¶4¨3tt¨rÖ‡ì‚lì Ü‹u×!5;îöîX1r:wà;´&áúúõ¸³m[I»O¡Š TZ´€q×®p?~¼¨+/i0ÑÑ)øôÓ½xñ"2™üŽG/.B÷îæ}ºu3ã;´F'âl*âneÂÒIæ:PÕ®~²ÂJ>I‘ää,øù=O®]{‚¬¬|XXÂÉ©h\QgghiÑm̺’È$8zç(~ºðÂÃ1¢Û¬µöm©Gp]È¥Rlµ±L.‡ëªUè6aàú† ¸³m&ž?#JðÂO?ÃîÝþ¸xq:vl…ÜÜB|÷Ýi>| ãÇ¿ƒM›>æ;D¥—™™‡Ý»ýpðà ˆÅy˜8q>ûÌmÛÒàä¤I ä“”'•ÊqïÞWE=Š…šš}ú´ƒ“SÑPN;¶â;L¥$grœ{t«þY…»QwáÐÁßþ.6.|‡¦tb®_‡®¹9t-,Jž“K¥8:v,$¹¹˜xáµû¬gOñÑG;°zõ‡øôS‡7^»~=íÛ¡uk] ®’’ÄØºõ Nœ¸Žã0}º&Mrh¶#”3÷•Ã6S³¥&‚’OR½˜˜TøûG W®Ú©Ñ˜œM%Ÿ¤þäåâߣpùr(.] F\\:Z´P…ƒCG¸¹ÙÂÅÅ&&z|‡Ùè={õ ë.®£©;ßRnJ ö»ºÂjð` ÿõW¾ÃQZÏŸ¿ÂС0aB?üðÃû|‡£´¤R9NŸ®]~ K€«k—f5\Ra¶ Ò<9Z©ð á%Ÿ¤áDG§pŠ[·žA"‘ÁÚº5ÜÜláädMWE«ASw¾½ÈK—pfêTŒúí7t5Šïp”ŽD"ÃèÑ› ‘ÈpþüÂf{;ømäçKpèÐMìÙã„„tŒk‡Ï?wF—.Mâ‰ì—…ˆö#Ú?/ƒ²a=ÒŽË-ªÿ iê(ù$Š‘›[ˆëןÂÛ;W®>øÔ×šÆÆ|‡£TÖ¯¿€;®ââÅE°¶nÍw8J%##{÷úcÿþëÈÍ-Ä„ ý0}º,, ù­ÁÈ¥ /ƒ²ã/Ft€YñhÑR¥¤í¦i_ºNPòIøžŸPøûGTxU´ÿ‰è UMÝY7’œ:ºäÍ~TC7nDÂÝ};~øá}LêÈw8J#!!;v\űc·¡¢"ÄgŸ9âÓO6‹NZ™±8>6ÚmTa餋Aº0±Ó‚@Du޼’O¿œœܸ oïPøø„!1Q }}M ØŽŽEãŠS‡‘×JOÝ™’{šº³ñwïâØ‡ÂeÕ*ôœ<™ïp=±¸hX%[[Sìßÿ ÿU‰ØºÕ^^÷ad¤Ï?wÆÿý__hj6¯±f3^äCϪù Ej…’OÒø”¾*zóf$lmMKnÏÛÛ[ÑÉ4ugmü︷w/>¹t íÛóN£6gÎ!FÀ×wq³¸b÷6þý÷¶lñ…O:vl…Ù³‡`ìX»&מ=3¶Q×2Ða˜u"o‹’OÒ¸¥§ç 0ðiÉpNII™04Ô€àêÚï¾Û::Í»8MÝY3r©GÆŒ“Éðñ?ÿ@ ¢Î3ùë¯ Ì{‡ÏÀàÁù§Q*;\’½½æÌq«k—¦óØ)Oru-QWÅH–‘º®ëÛÁ|€ßÑåFÉ'Qr9CHH"pùr(‚‚¢ÀqlmMáæÖnn¶èÖͬéük‰¦î¬^êÓ§88lì==áðå—|‡ÓèÄĤbèÐ 7ΫWÀw8ŽD"Ù3÷°cÇU„‡'6Éá’ÒžæáÉ™D_#;±°¨Ã£.,éÒø›¤¾PòI”WjjvI[Qoï0ˆÅ¹02ÒÆ AЧýì æÙöˆ¦î¬Ü½={pmÕ*üßéÓ0±³ã;œFC&“ヶ";».аJ¥åæâÈ‘[صë’’21fL/Ìš5;›ðZ½{¯ÐÎM–NºÐ6U‚6«b/8›÷»ð´`È9€%ó~ÀïW_ W`ˆîã–`ûŽEp0½¿•'ºú?Ö>ÍûÎONÒÑ…(-CC-ŒÕ£Fõ„L&Ghh|I"úçŸA 9ôêe‰¡CmáèhîÝÍùYavŸE>%SwŽÙ6†¦î,f÷Ùgxáç‡æÌÁäË—¡ªEm`Ó&oÇáÂ…E”xKJÊÄÖ­¾8yò`úôAøä‡&ݲ›>Ú¹)÷ÉÒØƒð8IS÷!à÷Ah™ˆMS?ÁˆI¦xìõ ñAøGW>I“”’’«WÃÇ' ~~O™™ C89+êìl--%øE_OJOÝiÕÒ _½û¦œÚl§îÌNLÄ~t9nk×òï‚‚¢ðþû[°bÅL›æÄw8¼{ñâ~ùå2Ξ}}ý˜=Û} ­­¤wRðêq.büÄHÉÁ𭀦tä+Ÿ…¸3¿†Äå?\Š.}}ñuÄMÌÔý‡®|òë$5Þ MRË–Z?Þ;wNFhèœ93£FõÄ£Gqøüó?Э۷ððØmÛ|ñôißá6¸æ=ðÇÔ?¾:C:ÁìóÑñ›ŽØä» y’<¾ÃS8­Ö­ñîúõxxø0žùøð¯²²ò1{ö!8;Ûà³Ïš÷xžÄ`òä=ptüîÝ‹Æúõî¸}{9¦MsRºÄSV(Gìu1ŒÁááÁ8óÉ<=Ÿ ½¶êäÉk¼gýþX¿i zêqถè¿ðü÷|Šîº8N=¦G¬´š…ˆ½à¬c‡1² Ërm ÆØè‚ã8p:6ø`ÈócáµØV8N–.‹q6N`ÙÁØ9¹ 9œF{Œ^wâ×_)ÿ þôz…žÓGÁ¬Ôokõî?àQ’&›–¾ë#GÚõ˜`o ŽÇqPoÓSv… ‡¡òØä•=_ãÍJ!ÍLRR&;qâ›1c?³¶^ÂLL°~ýV±¯¾:Î._a¾ClpQ)QlÞÑyLÃSƒ/4fßy}Ç2r3øKáþ™3‡mëÖå$'ó oæÍ;ÌzôXÎ^½Êâ;Þ\¾ÂFÞÄLL°áÃf—/‡0™LÎwXuvcC,ÛçpŸíêÄNò˜ÝÛó’¥FäÖiYƒ90=×õìÆËtyÄLkȺRÛ³åÁùU/$㠬݋m––œsMo¥Âl¿:ËÂâbÙ£ÃY+aG6ù“ÎLÝÔmõ gQa—ÙOà ˜¦Ó.-Éb³LŒÞg[Ÿ³øðKlå@ /O|Ž oaĦdWš ›sí*›ÝFÀÚÍ8Äî¾Hd¯#Ùõ߯3cÁìh’¼’غ²õ®Uü|Da¶q3t‚’OÒ¬I$2vûö3¶zõßìÝw72“¬]»ÅÌÝ};Û½ÛÅÆ¦ñbƒJÊLbßy}Çtçê2Æì;¯ïXjv*ßa)L~f&ÛÙ§;=e ß¡ðâôé Ö¦ÍBvåÊc¾CQ8©TÆNœ¸ÃÜÜÖ3“lÒ¤Ýìöíg|‡U/ÂϦ°Ç¾b9ÉoŸ V1`“üй´?™“¨ÌcU6çv5‰mUÉg¦7§£ÎnyÌråŒ1y!Ëzéæ›h2×ÉìõOIÔVÖK³ÛáǦ©1§?˜¬øµüGß²v*¯“ÏØ»Fì³ÀœªãQ3asng²ì 1Ë•¾~AƲî¯a]Ôªˆ-CÌòÒ+y^Zù*ÉNÐmwÒ¬‰DôéÓË–ÄÅ‹‹pëÖ·øþû±ÐÓkµkÏ£OŸпÿj,_~Hd|‡\¯Œµ±rôJ<ûñæ8ÏÁ–+[`ùµ%曄Œ¾ÃkpjÚÚ±y3žùø øØ1¾ÃQ¨¸¸t,YrŸ~êgçæ3žg~¾{öøcàÀ±hÑ1tîl‚Ë—¿ÄÓ”bÈ$&gÈO¯ú>·õ(Ctþ eý /PƒŽzqª B ,ó¸.mGKw5ÑvÀªã¶Ø- ;Áqü—Øwã)ž¾Ê»1Å·ÃUÚÎÁýœ„Å'#6[6tñ:Q3í’Nùª­Ñ¥eÂ_dá»àL‚lq&òß8„ !H Äo_N€[ïh¥£‹Ž!îõæ­(¶3!ЫäùæÛ³Ö(ù$¤ CLœØ;wNFpð*?#{Âß?;`có &OÞƒC‡n"!!ƒïpë¡–!VŽ^‰èµÑXýþjüô'¬–ZaÒ¾IˆLŽä;¼eÖ·/zO›†+Ë—#ýÅ ¾ÃQ™LŽ9sÁÔÔ+VŒá;…‹s±qãEôéó~üñ¸ºÚ"0ðlÞü1ºv5å;¼*æÈðôŸ4\Zð ûÂoe4ß!ÕcÉ‹’Niz Ò$¯_Pùøm¸›–†Èóëñ±y¾ùÐפš{>Œ±¢?Y23Bñ£½)¬tÄxò,³$¹,HÆËÂâêñÁ0=ýv涨¡«ÐÓhvÇ”z2÷9¼‡ ±Ýá¹ý2§d"Áï[tר"¶¡ïaS*y^R3”|R uu8:ZcÙ²‘ðó[‚›7¿ÅÊ•cß~ûÞyç{ ¼kÖüÓd®Šj©ia¾Ë|<ÿßsìž´7ŸÝD—]0iß$<~ù˜ïðŒã’%г´Ä… ÀdÊ_ŽÕÙ¶í >ŒÁöíŸ@M­ix˜(Æòå§aoÿöì ÀäɸsgV­z––†|‡W©Â,"/¤Áçëç82,×¾‹BöËBt›`ŒÞŸ+Ùø¢‚Ð<Å™ áHO{Œ“k¶àQ~ñk9·1¿£>ì–ß³²‡Ó@[¨Z㣑z¸°àkŠARÌ=Û­z¯Bˆ°;¦xÃï˹Øy3 /#}°aþfD¾N>¡‰¾K¾Cßûó1fá!܉JBBè?X3s#ú{b´y©ý]^€¬B ´í7};ê"÷Élœù%³ó‘ž-©86‘ê…w*~^¥) !ÐÀø¾ñOˆ2ÊÍ-`þþáìÛoÿbööß3“¬C‡¯Ù¤I»ÙÁƒ7XbbÓè¼S(-dn`6Ëm˜`º€Ü<’Ýyq‡ï°Ä«'OØ/VVìÖæÍ|‡Ò þý7Š™›/b;w^ã;”‘ÈæÎ=Ä,,¾`vv+ÙîÝ~,+«šŽ1DaŽ”íëŸíésû<‚Ib™q¼ÄRÔ6²¸MgI[ÉJW*‡oyŸµSƒjæ±~-ë§õº ¨„Ş϶Qa z°‰;±Ìì0¶ff"D¬u¿él_h6“3ÆäÙÁl÷§ṽº5óXû?ÖW«T›R&cÿî`Ÿõ7ejô™íØUÌ'©T›S56çv{~h*ë¡X˰'.²µNš –óØíÜŠcË’Wö|ýoÿ&êóIH=ˆŽN-à>·n=ƒD"ƒµuk¸¹ÙÂÉÉýûw€H¤¼7šËÔwwì@ÀO?a‚—Z÷ìÉw8õ.;»C‡n@ûöFøãéMrÆ«  hlÞì _ß0´ooŒ9s\0v¬TT”«A^üíLuÑ„ª¶rÅMH Ðôš„Ô·ÜÜB\¿þÞÞ¡¸rå12 ¯¯‰;ÂÑÑC‡vUêRšòÔL.ÇIä¼z…O.^„H]¹Æv¬Î¢EÇàë_ßÅhÙ²éÌìăO¶nõÅÝ»/лw[Ì›ç —.Ô©GLÑÊ‘p7 úí4 e¢Êw8õ"Ëû´z¹•¼nþE"6Ø¡iÕ&ò(ù$¤¡…‡'ÂÇ'þþ¸uëd29ºv5ƒ££5ÜܺÀÞÞJ)·×Swž >פ¦îÌzù\\Ðeüx ùþ{¾Ã©7gÏÞ‡§çA<8C†ØðN½Jå8}:¿ýv Ož¼„«kÌž=¤ÑõZÏO—"&PŒh?1âneBš/‡ã7èüAK¾C#„”|¢H99¸q#ÞÞ¡ðñ Cb¢††Z0 \]»àÝw»BGG¹¦{+=ug[öX}ÚÁÉÉnn¶°¶nÍw˜åddcoà^¬¿¸¯²_ÁÃÞ+F®@ã|‡V%iAu]]xœ:N Wº/>óçÁ×÷+´jÕø›<ÈdrüõWöìñGppÜÜlyï¹r4&#'©š­Taé¤ ËAº0é­ ¡ªò$ó„42”|¢ìRR²qõêcøø„ÁÏï 23óaiiX<”“-œœ:5ªN&…ÒB»{ «ÿY¨Ô(|Ôç#,¾6&wøŸä9NË–¡÷ôé|‡S­¿ÿ~€™3`ß¾©6¬ßáT© @Šƒo`߾į¦áý÷í0}ú tëfÆwhˆ¼†ÌØX8é¢eç|‡CHSAÉ'!M‰L&GPP¼½Ãàà8¨©‰`oo77[ Ö ffú|‡ È$8zç(~ºðÂÃ1¢Û¬µömíù­B·6oÆÍ_~ÁÄóçadÓxå¤$1\\ÖcĈîX·Îïp*•™™‡Ý»ýðÇ7™™‡‰à³ÏѶ­âƾ”äÊ¡ÒB9®dÒ„PòIHS–œüÿíÝ{TÕuºÇñ7w•@%”%u¥+ËT0M¨Ç•3“Ùä}Ù˜ÕÁ²©35sÖX®j¦™Ìr-Óôh™EtQÑjdrI#=¦ŠWQä&„ÍÞçÀãL˲/êçõ—‹½y¾ßÍrÁ³¾¿ïó<õdg"=½€¬¬CÔ×·ŠÆÇG‘ÅèÑá;x£Œî´Z,¤<ògÏòø7ßàîå|wl-+=¶Š²²j¶o_Œ··óMÐ)/¯eÅŠLRRvãââÂüù1Ìœ9–À@ÛOý²´Xùé»:Jrk9•W‡—¿;4ÄæëŠÈ?Qò)r«0›-ìÝûÿ§¢û÷ÿD÷;ƒ!Џ¸»vl?KgÝY[R Ü=s&1/½äèíüÂ{ïeñúëÛØ¶m‘S<¶¾Ø±c,_n$5u½{û°pa>zŸÍ åÌMJóê(É©¥$·–ƳfüxÓ“ãýé7òæ3*rƒPò)r«*)©"'§ˆÜÜ"23 ih8ODDßö{¢=uæÑ>ù„´^à‘”úß¿£·sA~þ)&O~›^˜ÈÂ…Î3•iïÞb–/7’‘QÀÀ<óL22~Gß¾Žk«d6[Ø´i«VeQXxšøøH›µK²Z¬œÞ{ïÞô¨“L‘ˆ’O¹¼ÆÆfþñ“¤¥å³}ûJK«éÕˇqãABÂP‚‚ìsúçL£;Ofeñùã3eåJîœ2ÅîëwHK;Èœ9ÿÚ5s˜8Ñ1m•›Ù¸15kr(+«fêÔ‘,XKddp—®Óq³xGÛýͦZ3wÏî˨gºv±)%Ÿ"rmŠ‹«ÚÜç“—wŒÖV C‡†´÷dÔ¨0›9ËèNã‹/Rôõ×ÌÎÈÀ'(È®k”—×ÿ&>8”¿þušÝׯ©1±vmë×ïÄdjæ±ÇF3~ tÙÍçZ9™UCñŽZJóê0Ÿ·pÛî¾Ü©þ›"7%Ÿ"Òy&S3;wÁhÌ'3³²²|3fññ‘<øàPzô°Ý£qGîliläÄüû÷çW7‚«ò­Ö¶¶J¥¥mm•ì9L¬†•+wœü=nÌ›ÍìÙãèúÊñêcM¤Î9Lèþ ˆñ'x”ÝüuSä¦äSDºÎáÃgHOÏ''§ˆ¼¼cX,V¢¢nÇ`ˆÄ`ˆbذ›œŠ:rtgùþýlœ2…¸W^áîY³l¾^‡5krxõÕT»¶U**:ÊlÙò¿ú±`A,ӧ߇mÛ%©¼ÈMEɧˆØFCÃyví:ŠÑ˜OzzgÎÔèÇøñwb0D1~üzôèÚBGîÜõ·¿ñÃÊ•ÌØ¾Þáá6]    ŒI“–ñüó‰<ý´í›ñÿðà V¬È =½€ˆˆ>,\wÝí’ÌJ¿oë¿yïÞN·ž:͹E(ùû¸øTô»ïŽ0bD( QDGG0|xÿ.[ËÞ£;-f3ŸLŠ¥µ•ßlÝŠ«»í©¦¦ß"(Èää'mÖºè_Û%ÆÓOO >>²Ó§×¦ÊJrj)ήåÔîz,f+AÃ|ˆ~¹?½ÂÓ¹@DìNɧˆØ_uuß~{äB;§òò:  &&‚èèbcïê’É7£;—~µ”Ý'vÛttgMq1 Œúío³xq—ÇïðÇ?nâË/÷ج­RKK+›7ïeåÊ>|¦KÚ%H¯áÇÏðs ÷n®„Ü߃ÐŒóWÿM‘[’Oq,‹ÅÊÁƒ¥äæ‘––Ïž='ñðpãÞ{ÁEDDßë^Ç£;ܰŒ?üé›6ÑoäÈ.‹ÛÁhÌgöìµ¼ÿþl&MÞ¥±ëêšxÿý,6lØEMM#3fŒaîÜq„…^wì“™5”æÕ:¾­`ÈÍS÷7EnaJ>EĹTU»pWÔh, ¶ÖDhh@{+§(bbîÄË«ó§e¶ݹiÖ,*aVZž¾]Wý]QQO|ü_˜0!’e˦wYÜòò:V¬È %e7..0þxfÌ{M½[-­V\Ý;UIDnJ>EÄyµ¶ZÈÏ?u!=p //wF Ã`ˆ"1q!!½:ÛV£;M••¬gpb"†7Þ¸®X¬V+?¾šââ*ÒÒžï’¶JÇÿÌÛo§‘šº^½ºóÔS˜6í^üü®®¬²ÐDqN[³÷óufÝ2”ŠÈ•)ù‘Geå9vì($=½€ììCÔÕ5@|| QŒ~ÍضÝytûv6Ï›ÇÃë×ßé8Ö­û–?ýi3[·&]waÖ¾}%,[–FFFwÜqIIzhžž—Oº­¨,làdV-%9µœ=ÚˆW7úikößÏ”‘‚’O¹1µ¶Zسç$Fc¹¹E8PŠ··cÇÆ`ˆ".î.‚ƒ{^u¼®ݹ}ñbŽÌÎÈ {`çïMžfÒ¤·X´(¤$C§ãù*×GŒÀ¢E L˜yÕÕò›gæçüün÷"t¼?¡1þôé«Çí"r­”|ŠÈÍ¡¢¢žììC¤§•uˆúú&""ú¶ß`ôèp¬ÖV’““ijjºdœªóU¤IcçÏ;ñv÷fNØ"ý#¯y?Ö¦&V­Â+:ë(>2+(.61wî¸v¢N§¹ÙÂÆ?Q\l"$Ä›èèÛˆˆð½ä0¦Áƒû‹¯—æÕáè¡–H"r½”|ŠÈÍÇdj&7·ˆÌÌB23 9uªšÀ@?Âû³uë_0›«¯Ä ê;·n®®4Y,û拸¸xbµ6wúûýüÆrþüIš›O]ñ½îîî´´´tz-‘+Pò)"7¿C‡N“™YHrr6»v-'=}³£·ä”²²²X²d ú³ "6ô™ºûŠÈMoÈ~ ÒÛn«$7·ÖÑÛ¹¥©Ó¯ˆˆˆˆØ’O±%Ÿ""""b7J>ED.ãÙ„_ñΡóW~cÃNžü[*®³º½>›¤I]§«ö#"ÒÅTp$"âL¼ïbÆïæÑ·‡š·‹ÈÍI'Ÿ""ÎÄ=ˆ{bï#¤›‹N/E䦤“O‘«Õ°“gM&fÁ@¾Y™ÊSoFÎ~…WfDá`má´ñ æ|dääùÞŒhÍ·µ‚kÿÌŠ/÷r¦Ùƒ ÿAÒïç1&н=f eû[_`ù$në¾"îÝdÍûoöû¦-€Oßã¡Þ•—Œcm<ζ·_çý´£Ô{öc̯ãhPÎ*"NH'Ÿ""×ÂtþÞ“'×¥²ñåáýh5yµíMÙ›NòõÁ!ü×'©lxùnŽ´šïk›9ññïy%½ÓÞÜ@òúטêñ¯.ý;­1÷³úãz&½¶–¥Ú~1ûŽeÙ¶¥ÜÝ}0‹>}‡‚Z/§‘üU/òÖî~Ìy÷c>_ûû?çÈ¥§ˆŠˆ8Œ’O‘kâEÔo~͈@?‚ï#̽‘sÍíɧG“çþwöô#侸ý‘sõGÙ¶­ŒaO%ñÐðú„ÞÃ#ÏÍ¥Ñ7ì©é˜$äIÔìùLz;==/q×óü±KÇ9}„¯³kþdS‡ö# ä[ôýôlKDœ~5‰ˆ\ 7_‚ü=ÚþíêŠËŹ¢»?}{´ÿZui­¥š’³MìYò0qK.DñÙ\}éÓËóòëš/§²šŸ} ½Ý—Žíx†è‘×ùÏ)"b#J>ED®‘Ëå Ñÿõ57_{ø2îÅOxõ>ß¶¯Y͘L-xv÷S[@×+·_.ŽÛq–wo ¤¬k”.@KåqªZ:õñDDlJÝEDlÉ{“c}ø~Å*Ò‹*¨®8BÆòyüûrâj’CK3¦&3Ön—‰ãÎÄØžü¸òRóÏPujŸ¾û%§Ì6ÿt""×L'Ÿ""6åMäfqË›¼·pU­nôŽœHÒk³ä \.õ æž°3¬žóþÉï0ñ’qºÁü7xÞô:«Ÿ™ÎÛ!ÄΙÎ]‡²ìôED®ž‹Õjµ^ùm""7¾””¦M›ÆŽ;½§”••Å’%KП±¡ÏôØ]DDDDìFɧˆˆˆˆØ’O±%Ÿ""""b7J>EDDDÄn”|ŠˆˆˆˆÝ(ù»Qò)""""v£ G"rËpss 66ÖÁ;q^?#[Qò)"·ŒÉ“'óÅ_ÐÚÚêè­8­>}ú8z "r“ÓxM±×ûQò)""""v£äSDDDDìÆøÌÑ›‘[BÞÿÿNGÇEjã}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_w.html0000664000175000017500000001107112414127675023643 0ustar00execexec00000000000000 wnckmm: Class Members - Functions libwnckmm-1.0-0.1.1/doc/reference/html/tabs.css0000664000175000017500000000221312414127675021045 0ustar00execexec00000000000000.tabs, .tabs2, .tabs3 { background-image: url('tab_b.png'); width: 100%; z-index: 101; font-size: 13px; font-family: 'Lucida Grande',Geneva,Helvetica,Arial,sans-serif; } .tabs2 { font-size: 10px; } .tabs3 { font-size: 9px; } .tablist { margin: 0; padding: 0; display: table; } .tablist li { float: left; display: table-cell; background-image: url('tab_b.png'); line-height: 36px; list-style: none; } .tablist a { display: block; padding: 0 20px; font-weight: bold; background-image:url('tab_s.png'); background-repeat:no-repeat; background-position:right; color: #283A5D; text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); text-decoration: none; outline: none; } .tabs3 .tablist a { padding: 0 10px; } .tablist a:hover { background-image: url('tab_h.png'); background-repeat:repeat-x; color: #fff; text-shadow: 0px 1px 1px rgba(0, 0, 0, 1.0); text-decoration: none; } .tablist li.current a { background-image: url('tab_a.png'); background-repeat:repeat-x; color: #fff; text-shadow: 0px 1px 1px rgba(0, 0, 0, 1.0); } libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_c.html0000664000175000017500000000742012414127675023622 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- c -

libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_i.html0000664000175000017500000001417212414127675023632 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- i -

libwnckmm-1.0-0.1.1/doc/reference/html/a00026.html0000664000175000017500000004112312414127675021103 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Screen Member List

This is the complete list of members for Wnck::Screen, including all inherited members.

force_update()Wnck::Screen
get(int index)Wnck::Screenstatic
get_active_window() const Wnck::Screen
get_active_workspace() const Wnck::Screen
get_background_pixmap_xid() const Wnck::Screen
get_default()Wnck::Screenstatic
get_for_root(gulong root_id)Wnck::Screenstatic
get_height() const Wnck::Screen
get_number() const Wnck::Screen
get_previously_active_window() const Wnck::Screen
get_type() G_GNUC_CONSTWnck::Screenstatic
get_width() const Wnck::Screen
get_window_manager_name()Wnck::Screen
get_windows() const Wnck::Screen
get_windows_stacked() const Wnck::Screen
get_workspace(int workspace) const Wnck::Screen
get_workspace_count() const Wnck::Screen
gobj()Wnck::Screeninline
gobj() const Wnck::Screeninline
move_viewport(int x, int y) const Wnck::Screen
net_wm_supports(const std::string& atom)Wnck::Screen
on_active_window_changed(Window* previously_active_window)Wnck::Screenprotectedvirtual
on_active_workspace_changed(Workspace* previously_active_workspace)Wnck::Screenprotectedvirtual
on_application_closed(Application* app)Wnck::Screenprotectedvirtual
on_application_opened(Application* app)Wnck::Screenprotectedvirtual
on_backgroupnd_changed()Wnck::Screenprotectedvirtual
on_class_group_closed(ClassGroup* app)Wnck::Screenprotectedvirtual
on_class_group_opened(ClassGroup* app)Wnck::Screenprotectedvirtual
on_showing_desktop_changed()Wnck::Screenprotectedvirtual
on_viewports_changed()Wnck::Screenprotectedvirtual
on_window_closed(Window* window)Wnck::Screenprotectedvirtual
on_window_manager_changed()Wnck::Screenprotectedvirtual
on_window_opened(Window* window)Wnck::Screenprotectedvirtual
on_window_stacking_changed()Wnck::Screenprotectedvirtual
on_workspace_created(Workspace* workspace)Wnck::Screenprotectedvirtual
on_workspace_destroyed(Workspace* workspace)Wnck::Screenprotectedvirtual
set_showing_desktop(bool show) const Wnck::Screen
set_workspace_count(int count) const Wnck::Screen
signal_active_window_changed()Wnck::Screen
signal_active_workspace_changed()Wnck::Screen
signal_application_closed()Wnck::Screen
signal_application_opened()Wnck::Screen
signal_backgroupnd_changed()Wnck::Screen
signal_class_group_closed()Wnck::Screen
signal_class_group_opened()Wnck::Screen
signal_showing_desktop_changed()Wnck::Screen
signal_viewports_changed()Wnck::Screen
signal_window_closed()Wnck::Screen
signal_window_manager_changed()Wnck::Screen
signal_window_opened()Wnck::Screen
signal_window_stacking_changed()Wnck::Screen
signal_workspace_created()Wnck::Screen
signal_workspace_destroyed()Wnck::Screen
wrap(WnckScreen* object, bool take_copy=false)Wnck::Screenrelated
~Screen()Wnck::Screenvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/a00027.html0000664000175000017500000000751412414127675021112 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Selector Member List

This is the complete list of members for Wnck::Selector, including all inherited members.

gobj()Wnck::Selectorinline
gobj() const Wnck::Selectorinline
Selector()Wnck::Selectorexplicit
wrap(WnckSelector* object, bool take_copy=false)Wnck::Selectorrelated
~Selector()Wnck::Selectorvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/functions_u.html0000664000175000017500000001105212414127675022625 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- u -

libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_o.html0000664000175000017500000001442412414127675023640 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- o -

libwnckmm-1.0-0.1.1/doc/reference/html/a00006.html0000664000175000017500000002410612414127675021103 0ustar00execexec00000000000000 wnckmm: Wnck::Selector Class Reference

This represents a workspace. More...

Inherits MenuBar.

Public Member Functions

virtual ~Selector ()
 
WnckSelector* gobj ()
 Provides access to the underlying C GtkObject. More...
 
const WnckSelector* gobj () const
 Provides access to the underlying C GtkObject. More...
 
 Selector ()
 Creates a selector menu. More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Selectorwrap (WnckSelector* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a workspace.

Constructor & Destructor Documentation

virtual Wnck::Selector::~Selector ( )
virtual
Wnck::Selector::Selector ( )
explicit

Creates a selector menu.

Member Function Documentation

WnckSelector* Wnck::Selector::gobj ( )
inline

Provides access to the underlying C GtkObject.

const WnckSelector* Wnck::Selector::gobj ( ) const
inline

Provides access to the underlying C GtkObject.

Friends And Related Function Documentation

Wnck::Selector* wrap ( WnckSelector *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/selector.h
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func.html0000664000175000017500000001012412414127675023313 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- a -

libwnckmm-1.0-0.1.1/doc/reference/html/a00003.html0000664000175000017500000003750512414127675021107 0ustar00execexec00000000000000 wnckmm: Wnck::ClassGroup Class Reference

This represents a class group. More...

Inherits Object.

Public Member Functions

virtual ~ClassGroup ()
 
WnckClassGroup* gobj ()
 Provides access to the underlying C GObject. More...
 
const WnckClassGroup* gobj () const
 Provides access to the underlying C GObject. More...
 
std::string get_res_class () const
 
std::string get_name () const
 
Glib::RefPtr< Gdk::Pixbuf > get_icon () const
 
Glib::RefPtr< Gdk::Pixbuf > get_mini_icon () const
 

Static Public Member Functions

static GType get_type () G_GNUC_CONST
 Get the GType for this class, for use with the underlying GObject type system. More...
 
static ClassGroupget (const std::string& res_class)
 

Protected Member Functions

 ClassGroup ()
 

Related Functions

(Note that these are not member functions.)

Wnck::ClassGroupwrap (WnckClassGroup* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a class group.

Constructor & Destructor Documentation

virtual Wnck::ClassGroup::~ClassGroup ( )
virtual
Wnck::ClassGroup::ClassGroup ( )
protected

Member Function Documentation

static ClassGroup* Wnck::ClassGroup::get ( const std::string &  res_class)
static
Glib::RefPtr<Gdk::Pixbuf> Wnck::ClassGroup::get_icon ( ) const
Glib::RefPtr<Gdk::Pixbuf> Wnck::ClassGroup::get_mini_icon ( ) const
std::string Wnck::ClassGroup::get_name ( ) const
std::string Wnck::ClassGroup::get_res_class ( ) const
static GType Wnck::ClassGroup::get_type ( )
static

Get the GType for this class, for use with the underlying GObject type system.

WnckClassGroup* Wnck::ClassGroup::gobj ( )
inline

Provides access to the underlying C GObject.

const WnckClassGroup* Wnck::ClassGroup::gobj ( ) const
inline

Provides access to the underlying C GObject.

Friends And Related Function Documentation

Wnck::ClassGroup* wrap ( WnckClassGroup *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/class-group.h
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2blank.png0000664000175000017500000000012612414127675022002 0ustar00execexec00000000000000‰PNG  IHDRɪ|IDATxíݱðøScOx@ –¨y}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_h.html0000664000175000017500000000743712414127675022624 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- h -

libwnckmm-1.0-0.1.1/doc/reference/html/tab_b.png0000664000175000017500000000025112414127675021157 0ustar00execexec00000000000000‰PNG  IHDR$ÇÇ[pIDATxíÝMƒ EáÇ»ÐÔ¸¸u`âÀ´V0РÆ}:t]DÁ²s¿ä®‚¶ýËu¥ø|’xùî½À>ÿ1»& mÄ8ÜSÙÑxÜLÀUûšÞ²ÄiE–ŠåOs„¢’nxàÒêÓKN²~jIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/tab_h.png0000664000175000017500000000026112414127675021166 0ustar00execexec00000000000000‰PNG  IHDR$ÇÇ[xIDATxíÝMÁ@†áž~¥ÜÆÎ’Evˆ¿"!•²‘d*×rGq=Š{¼ßSݧçë­ÓÉHÇ uO^õø[À_‡¢ãXvyËþÒ±=·VCffææ{°öŠó´Rçœ%_õçÿŽ¢ö·°Çrug¶(?gh\i>|sIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/namespacemembers_eval.html0000664000175000017500000002663412414127675024623 0ustar00execexec00000000000000 wnckmm: Namespace Members
 

- m -

- p -

  • PAGER_DISPLAY_CONTENT : Wnck
  • PAGER_DISPLAY_NAME : Wnck

- w -

  • WINDOW_ACTION_ABOVE : Wnck
  • WINDOW_ACTION_BELOW : Wnck
  • WINDOW_ACTION_CHANGE_WORKSPACE : Wnck
  • WINDOW_ACTION_CLOSE : Wnck
  • WINDOW_ACTION_FULLSCREEN : Wnck
  • WINDOW_ACTION_MAXIMIZE : Wnck
  • WINDOW_ACTION_MAXIMIZE_HORIZONTALLY : Wnck
  • WINDOW_ACTION_MAXIMIZE_VERTICALLY : Wnck
  • WINDOW_ACTION_MINIMIZE : Wnck
  • WINDOW_ACTION_MOVE : Wnck
  • WINDOW_ACTION_RESIZE : Wnck
  • WINDOW_ACTION_SHADE : Wnck
  • WINDOW_ACTION_STICK : Wnck
  • WINDOW_ACTION_UNMAXIMIZE : Wnck
  • WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY : Wnck
  • WINDOW_ACTION_UNMAXIMIZE_VERTICALLY : Wnck
  • WINDOW_ACTION_UNMINIMIZE : Wnck
  • WINDOW_ACTION_UNSHADE : Wnck
  • WINDOW_ACTION_UNSTICK : Wnck
  • WINDOW_CHANGE_HEIGHT : Wnck
  • WINDOW_CHANGE_WIDTH : Wnck
  • WINDOW_CHANGE_X : Wnck
  • WINDOW_CHANGE_Y : Wnck
  • WINDOW_DESKTOP : Wnck
  • WINDOW_DIALOG : Wnck
  • WINDOW_DOCK : Wnck
  • WINDOW_GRAVITY_CENTER : Wnck
  • WINDOW_GRAVITY_CURRENT : Wnck
  • WINDOW_GRAVITY_EAST : Wnck
  • WINDOW_GRAVITY_NORTH : Wnck
  • WINDOW_GRAVITY_NORTHEAST : Wnck
  • WINDOW_GRAVITY_NORTHWEST : Wnck
  • WINDOW_GRAVITY_SOUTH : Wnck
  • WINDOW_GRAVITY_SOUTHEAST : Wnck
  • WINDOW_GRAVITY_SOUTHWEST : Wnck
  • WINDOW_GRAVITY_STATIC : Wnck
  • WINDOW_GRAVITY_WEST : Wnck
  • WINDOW_MENU : Wnck
  • WINDOW_NORMAL : Wnck
  • WINDOW_SPLASHSCREEN : Wnck
  • WINDOW_STATE_ABOVE : Wnck
  • WINDOW_STATE_BELOW : Wnck
  • WINDOW_STATE_DEMANDS_ATTENTION : Wnck
  • WINDOW_STATE_FULLSCREEN : Wnck
  • WINDOW_STATE_HIDDEN : Wnck
  • WINDOW_STATE_MAXIMIZED_HORIZONTALLY : Wnck
  • WINDOW_STATE_MAXIMIZED_VERTICALLY : Wnck
  • WINDOW_STATE_MINIMIZED : Wnck
  • WINDOW_STATE_SHADED : Wnck
  • WINDOW_STATE_SKIP_PAGER : Wnck
  • WINDOW_STATE_SKIP_TASKLIST : Wnck
  • WINDOW_STATE_STICKY : Wnck
  • WINDOW_STATE_URGENT : Wnck
  • WINDOW_TOOLBAR : Wnck
  • WINDOW_UTILITY : Wnck
libwnckmm-1.0-0.1.1/doc/reference/html/namespacemembers.html0000664000175000017500000003205612414127675023607 0ustar00execexec00000000000000 wnckmm: Namespace Members
Here is a list of all namespace members with links to the namespace documentation for each member:

- m -

- o -

- p -

  • PAGER_DISPLAY_CONTENT : Wnck
  • PAGER_DISPLAY_NAME : Wnck
  • PagerDisplayMode : Wnck

- w -

  • WINDOW_ACTION_ABOVE : Wnck
  • WINDOW_ACTION_BELOW : Wnck
  • WINDOW_ACTION_CHANGE_WORKSPACE : Wnck
  • WINDOW_ACTION_CLOSE : Wnck
  • WINDOW_ACTION_FULLSCREEN : Wnck
  • WINDOW_ACTION_MAXIMIZE : Wnck
  • WINDOW_ACTION_MAXIMIZE_HORIZONTALLY : Wnck
  • WINDOW_ACTION_MAXIMIZE_VERTICALLY : Wnck
  • WINDOW_ACTION_MINIMIZE : Wnck
  • WINDOW_ACTION_MOVE : Wnck
  • WINDOW_ACTION_RESIZE : Wnck
  • WINDOW_ACTION_SHADE : Wnck
  • WINDOW_ACTION_STICK : Wnck
  • WINDOW_ACTION_UNMAXIMIZE : Wnck
  • WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY : Wnck
  • WINDOW_ACTION_UNMAXIMIZE_VERTICALLY : Wnck
  • WINDOW_ACTION_UNMINIMIZE : Wnck
  • WINDOW_ACTION_UNSHADE : Wnck
  • WINDOW_ACTION_UNSTICK : Wnck
  • WINDOW_CHANGE_HEIGHT : Wnck
  • WINDOW_CHANGE_WIDTH : Wnck
  • WINDOW_CHANGE_X : Wnck
  • WINDOW_CHANGE_Y : Wnck
  • WINDOW_DESKTOP : Wnck
  • WINDOW_DIALOG : Wnck
  • WINDOW_DOCK : Wnck
  • WINDOW_GRAVITY_CENTER : Wnck
  • WINDOW_GRAVITY_CURRENT : Wnck
  • WINDOW_GRAVITY_EAST : Wnck
  • WINDOW_GRAVITY_NORTH : Wnck
  • WINDOW_GRAVITY_NORTHEAST : Wnck
  • WINDOW_GRAVITY_NORTHWEST : Wnck
  • WINDOW_GRAVITY_SOUTH : Wnck
  • WINDOW_GRAVITY_SOUTHEAST : Wnck
  • WINDOW_GRAVITY_SOUTHWEST : Wnck
  • WINDOW_GRAVITY_STATIC : Wnck
  • WINDOW_GRAVITY_WEST : Wnck
  • WINDOW_MENU : Wnck
  • WINDOW_NORMAL : Wnck
  • WINDOW_SPLASHSCREEN : Wnck
  • WINDOW_STATE_ABOVE : Wnck
  • WINDOW_STATE_BELOW : Wnck
  • WINDOW_STATE_DEMANDS_ATTENTION : Wnck
  • WINDOW_STATE_FULLSCREEN : Wnck
  • WINDOW_STATE_HIDDEN : Wnck
  • WINDOW_STATE_MAXIMIZED_HORIZONTALLY : Wnck
  • WINDOW_STATE_MAXIMIZED_VERTICALLY : Wnck
  • WINDOW_STATE_MINIMIZED : Wnck
  • WINDOW_STATE_SHADED : Wnck
  • WINDOW_STATE_SKIP_PAGER : Wnck
  • WINDOW_STATE_SKIP_TASKLIST : Wnck
  • WINDOW_STATE_STICKY : Wnck
  • WINDOW_STATE_URGENT : Wnck
  • WINDOW_TOOLBAR : Wnck
  • WINDOW_UTILITY : Wnck
  • WindowActions : Wnck
  • WindowGravity : Wnck
  • WindowMoveResizeMask : Wnck
  • WindowState : Wnck
  • WindowType : Wnck
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2folderclosed.png0000664000175000017500000000115012414127675023356 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆ/IDATxí]MOÔ@~ÚúuØlp]ö¿#›Å]PYECˆ\9ù¼yÑß`ÖÄÿàÿÀÉxóâ¢C &=qÐÄ£—vZçv¶3m؃‡vžLûNç}Þ÷}Þ½ZA@n° OäNp ’xóþK°ññ€xÜj”°8sÑ€“ “€œ_¼[Âíæ§ïD'‚•yye+ø¼û 7#rNŸlïük* ¾0Ь_d«_(àñÖ±àôz=ñxõv§÷h©‰z¹€šØP-äóä’̪uý¼$»\DãJc—B4¯ãÝÖ.:£Ï-ÑÏß}µŠLEíºþ #—ûáºÀÏgN;BŠ€6ïýñ䬜…ö@’Ðåñp&™h>p9¤™EEά¨ÎÊ‘" u¥n€$R"?{¹<˜…ë…%PNtâ$‰ß¶±úá+^<é"§2 ªDq”q´\¬«Ò™a–Œ‘©Aÿ€"Ôµ ™êŸèP£}#Eàz{û.8i îp³ê(ADwD¦E<ê¬cE¦$ HdÊÄ ”.:Ù GŽ-`ŒL‚ý¾'¢‰Ä<¤CIª½;ÙÇTZd±i};>èôß‚z×;K×§8t ¤Ž q”:uvÿv•Ý›¬²ÙvEân{„M·FXg¼ÌfZÖ¨°¹‰*›ßÌß©±ù©:›j–YqèÜë#3çÏSøWøÿÿÑr'ø Ôùù‚ ©¡IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_n.html0000664000175000017500000000726612414127675022632 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- n -

libwnckmm-1.0-0.1.1/doc/reference/html/a00008.html0000664000175000017500000026530112414127676021112 0ustar00execexec00000000000000 wnckmm: Wnck::Window Class Reference

This represents a workspace. More...

Inherits Object.

Public Member Functions

virtual ~Window ()
 
WnckWindow* gobj ()
 Provides access to the underlying C GObject. More...
 
const WnckWindow* gobj () const
 Provides access to the underlying C GObject. More...
 
Screenget_screen () const
 
bool has_name () const
 
std::string get_name () const
 
bool has_icon_name () const
 
std::string get_icon_name () const
 
bool is_icon_fallback () const
 
Glib::RefPtr< Gdk::Pixbuf > get_icon () const
 
Glib::RefPtr< Gdk::Pixbuf > get_mini_icon () const
 
Applicationget_application () const
 
Windowget_transient () const
 
gulong get_group_leader () const
 
gulong get_xid () const
 
ClassGroupget_class_group () const
 
std::string get_session_id () const
 
std::string get_session_id_utf8 () const
 
int get_pid () const
 
int get_sort_order () const
 
void set_sort_order (int order)
 
WindowType get_window_type () const
 
void set_window_type (WindowType order)
 
WindowState get_state () const
 
bool is_minimized () const
 
bool is_maximized_horizontally () const
 
bool is_maximized_vertically () const
 
bool is_maximized () const
 
bool is_shaded () const
 
bool is_pinned () const
 
bool is_sticky () const
 
bool is_above () const
 
bool is_below () const
 
bool is_skip_pager () const
 
bool is_skip_tasklist () const
 
bool is_fullscreen () const
 
bool is_needs_attention () const
 
bool is_needs_attention_or_transient () const
 
WindowActions get_actions () const
 
void minimize ()
 
void unminimize (guint32 timestamp)
 
void maximize ()
 
void unmaximize ()
 
void maximize_vertically ()
 
void unmaximize_vertically ()
 
void maximize_horizontally ()
 
void unmaximize_horizontally ()
 
void shade ()
 
void unshade ()
 
void pin ()
 
void unpin ()
 
void stick ()
 
void unstick ()
 
void make_above ()
 
void unmake_above ()
 
void make_below ()
 
void unmake_below ()
 
void set_skip_pager (bool skip=true)
 
void set_skip_tasklist (bool skip=true)
 
void set_fullscreen (bool fullscreen=true)
 
void close (guint32 timestamp)
 
Workspaceget_workspace () const
 
bool is_on_workspace (const Workspace* workspace) const
 
bool is_visible_on_workspace (const Workspace* workspace) const
 
void move_to_workspace (const Workspace* workspace)
 
bool is_in_viewport (const Workspace* workspace) const
 
void activate (guint32 timestamp)
 
bool is_active () const
 
bool is_most_recently_activated () const
 
void activate_transient (guint32 timestamp)
 
bool is_transient_most_recently_activated () const
 
void set_icon_geometry (int x, int y, int width, int height)
 
void set_icon_geometry (const Gdk::Rectangle& geom)
 
Gdk::Rectangle get_client_geometry () const
 
Gdk::Rectangle get_geometry () const
 
void set_geometry (WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height)
 
void set_geometry (WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom)
 
void keyboard_move ()
 
void keyboard_size ()
 
Glib::SignalProxy2< void,
WindowActions, WindowActions
signal_actions_changed ()
 
Glib::SignalProxy0< void > signal_geometry_changed ()
 
Glib::SignalProxy2< void,
WindowState, WindowState
signal_state_changed ()
 
Glib::SignalProxy0< void > signal_workspace_changed ()
 
Glib::SignalProxy0< void > signal_icon_changed ()
 
Glib::SignalProxy0< void > signal_name_changed ()
 

Static Public Member Functions

static GType get_type () G_GNUC_CONST
 Get the GType for this class, for use with the underlying GObject type system. More...
 
static Windowget_for_xid (gulong xid)
 

Protected Member Functions

 Window ()
 
virtual void on_actions_changed (WindowActions changed_mask, WindowActions new_state)
 This is a default handler for the signal signal_actions_changed(). More...
 
virtual void on_geometry_changed ()
 This is a default handler for the signal signal_geometry_changed(). More...
 
virtual void on_state_changed (WindowState changed_mask, WindowState new_state)
 This is a default handler for the signal signal_state_changed(). More...
 
virtual void on_workspace_changed ()
 This is a default handler for the signal signal_workspace_changed(). More...
 
virtual void on_icon_changed ()
 This is a default handler for the signal signal_icon_changed(). More...
 
virtual void on_name_changed ()
 This is a default handler for the signal signal_name_changed(). More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Windowwrap (WnckWindow* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a workspace.

Constructor & Destructor Documentation

virtual Wnck::Window::~Window ( )
virtual
Wnck::Window::Window ( )
protected

Member Function Documentation

void Wnck::Window::activate ( guint32  timestamp)
void Wnck::Window::activate_transient ( guint32  timestamp)
void Wnck::Window::close ( guint32  timestamp)
WindowActions Wnck::Window::get_actions ( ) const
Application* Wnck::Window::get_application ( ) const
ClassGroup* Wnck::Window::get_class_group ( ) const
Gdk::Rectangle Wnck::Window::get_client_geometry ( ) const
static Window* Wnck::Window::get_for_xid ( gulong  xid)
static
Gdk::Rectangle Wnck::Window::get_geometry ( ) const
gulong Wnck::Window::get_group_leader ( ) const
Glib::RefPtr<Gdk::Pixbuf> Wnck::Window::get_icon ( ) const
std::string Wnck::Window::get_icon_name ( ) const
Glib::RefPtr<Gdk::Pixbuf> Wnck::Window::get_mini_icon ( ) const
std::string Wnck::Window::get_name ( ) const
int Wnck::Window::get_pid ( ) const
Screen* Wnck::Window::get_screen ( ) const
std::string Wnck::Window::get_session_id ( ) const
std::string Wnck::Window::get_session_id_utf8 ( ) const
int Wnck::Window::get_sort_order ( ) const
WindowState Wnck::Window::get_state ( ) const
Window* Wnck::Window::get_transient ( ) const
static GType Wnck::Window::get_type ( )
static

Get the GType for this class, for use with the underlying GObject type system.

WindowType Wnck::Window::get_window_type ( ) const
Workspace* Wnck::Window::get_workspace ( ) const
gulong Wnck::Window::get_xid ( ) const
WnckWindow* Wnck::Window::gobj ( )
inline

Provides access to the underlying C GObject.

const WnckWindow* Wnck::Window::gobj ( ) const
inline

Provides access to the underlying C GObject.

bool Wnck::Window::has_icon_name ( ) const
bool Wnck::Window::has_name ( ) const
bool Wnck::Window::is_above ( ) const
bool Wnck::Window::is_active ( ) const
bool Wnck::Window::is_below ( ) const
bool Wnck::Window::is_fullscreen ( ) const
bool Wnck::Window::is_icon_fallback ( ) const
bool Wnck::Window::is_in_viewport ( const Workspace workspace) const
bool Wnck::Window::is_maximized ( ) const
bool Wnck::Window::is_maximized_horizontally ( ) const
bool Wnck::Window::is_maximized_vertically ( ) const
bool Wnck::Window::is_minimized ( ) const
bool Wnck::Window::is_most_recently_activated ( ) const
bool Wnck::Window::is_needs_attention ( ) const
bool Wnck::Window::is_needs_attention_or_transient ( ) const
bool Wnck::Window::is_on_workspace ( const Workspace workspace) const
bool Wnck::Window::is_pinned ( ) const
bool Wnck::Window::is_shaded ( ) const
bool Wnck::Window::is_skip_pager ( ) const
bool Wnck::Window::is_skip_tasklist ( ) const
bool Wnck::Window::is_sticky ( ) const
bool Wnck::Window::is_transient_most_recently_activated ( ) const
bool Wnck::Window::is_visible_on_workspace ( const Workspace workspace) const
void Wnck::Window::keyboard_move ( )
void Wnck::Window::keyboard_size ( )
void Wnck::Window::make_above ( )
void Wnck::Window::make_below ( )
void Wnck::Window::maximize ( )
void Wnck::Window::maximize_horizontally ( )
void Wnck::Window::maximize_vertically ( )
void Wnck::Window::minimize ( )
void Wnck::Window::move_to_workspace ( const Workspace workspace)
virtual void Wnck::Window::on_actions_changed ( WindowActions  changed_mask,
WindowActions  new_state 
)
protectedvirtual

This is a default handler for the signal signal_actions_changed().

virtual void Wnck::Window::on_geometry_changed ( )
protectedvirtual

This is a default handler for the signal signal_geometry_changed().

virtual void Wnck::Window::on_icon_changed ( )
protectedvirtual

This is a default handler for the signal signal_icon_changed().

virtual void Wnck::Window::on_name_changed ( )
protectedvirtual

This is a default handler for the signal signal_name_changed().

virtual void Wnck::Window::on_state_changed ( WindowState  changed_mask,
WindowState  new_state 
)
protectedvirtual

This is a default handler for the signal signal_state_changed().

virtual void Wnck::Window::on_workspace_changed ( )
protectedvirtual

This is a default handler for the signal signal_workspace_changed().

void Wnck::Window::pin ( )
void Wnck::Window::set_fullscreen ( bool  fullscreen = true)
void Wnck::Window::set_geometry ( WindowGravity  gravity,
WindowMoveResizeMask  geometry_mask,
int  x,
int  y,
int  width,
int  height 
)
void Wnck::Window::set_geometry ( WindowGravity  gravity,
WindowMoveResizeMask  geometry_mask,
const Gdk::Rectangle &  geom 
)
void Wnck::Window::set_icon_geometry ( int  x,
int  y,
int  width,
int  height 
)
void Wnck::Window::set_icon_geometry ( const Gdk::Rectangle &  geom)
void Wnck::Window::set_skip_pager ( bool  skip = true)
void Wnck::Window::set_skip_tasklist ( bool  skip = true)
void Wnck::Window::set_sort_order ( int  order)
void Wnck::Window::set_window_type ( WindowType  order)
void Wnck::Window::shade ( )
Glib::SignalProxy2< void,WindowActions,WindowActions > Wnck::Window::signal_actions_changed ( )
Slot Prototype:
void on_my_actions_changed(WindowActions changed_mask, WindowActions new_state)
Glib::SignalProxy0< void > Wnck::Window::signal_geometry_changed ( )
Slot Prototype:
void on_my_geometry_changed()
Glib::SignalProxy0< void > Wnck::Window::signal_icon_changed ( )
Slot Prototype:
void on_my_icon_changed()
Glib::SignalProxy0< void > Wnck::Window::signal_name_changed ( )
Slot Prototype:
void on_my_name_changed()
Glib::SignalProxy2< void,WindowState,WindowState > Wnck::Window::signal_state_changed ( )
Slot Prototype:
void on_my_state_changed(WindowState changed_mask, WindowState new_state)
Glib::SignalProxy0< void > Wnck::Window::signal_workspace_changed ( )
Slot Prototype:
void on_my_workspace_changed()
void Wnck::Window::stick ( )
void Wnck::Window::unmake_above ( )
void Wnck::Window::unmake_below ( )
void Wnck::Window::unmaximize ( )
void Wnck::Window::unmaximize_horizontally ( )
void Wnck::Window::unmaximize_vertically ( )
void Wnck::Window::unminimize ( guint32  timestamp)
void Wnck::Window::unpin ( )
void Wnck::Window::unshade ( )
void Wnck::Window::unstick ( )

Friends And Related Function Documentation

Wnck::Window* wrap ( WnckWindow *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/window.h
libwnckmm-1.0-0.1.1/doc/reference/html/inherit_graph_1.png0000664000175000017500000003527412414127675023170 0ustar00execexec00000000000000‰PNG  IHDRøð¢à>1bKGDÿÿÿ ½§“ IDATxœíy0E¡·FúÁÓ» jt"eèj†Ë½ŸÃÆëÈ4Y[ùŒëith~Ÿ ƺšH÷OÙô”ó÷9.Çÿ7yøcNÓròš9R êIÙí~yzqz¯@.@ 9s—QÌô„Lšs)O‘©[·ÍÀ'Ef1`—§$ÓtfX)bèQŽr¶§‚W›“ £:e€UDñw!AD2pÙWÁiŸ1\›°ÅDÞhC\5У!È6¬iÛzrð}î䳜±…Û9å(7ñø™ÕVJ"hOÙv·ŒÃ?±6×ò‘SÍ·P—€ ‚j–KÏe3hQޤ9^­Ñ¶8SÄýrzs^¨¯ºAD½é;ï•s>ëùæÚ{‚Ò?Éd2™ÜÅAM©4ĬΗr[Þî-çL©¡FÏ‘ÓÙ˜ÖŒP)Ó¥”–>mDÅ m~{PLÍ¿ê© nµ²)ã·ÑøasN<É/+ÊŒÚnA™s»FhiÓ€‚ª';Ìå |c*9‚ ¬â¸û…Ì/‚ÔÝ#“Hnw©0·òÚO¢kT-Œ ‚Ð(©{œz’÷éÍ–q›ÓÕ$Š«®Mij-ôS#I¥I¾jÝ•WR?VTWä'’‡I8\«ü¬ó§µDiÓ€Oõ©›uqêóƒR KßÇp Š[ŸüÀâ{íð÷ïèõë×ùº5zÑ-£#ôûî²$ÏxjaÀx›‹e\nå5GéÑrh/ü4ˆN7j`ÞÖp®C¡Þ˜D4 x÷ÜW`w¹ŒË˃ÛRO«gr„FqÒ]ìm†ÚþéÍ ×Ýu'‘›¡äò“¬ª£»Ö» AW?(O±QiëŠôÕ3ÆÉiI×ç5¼]„ÝH¯gòŒ'eøÇs_Ú7"ÆogÿwL¤.1ø?îO—òj©T*•J­y{ÚªåA›Ó9µï>6ðrn)}]Æ%i’°üÛÃWRCòFç£ÅÆ«ârjêËï2î¬ '?\¦>¯¨‘'Už]“4åp|®½· F0bš“¤ß„%ã';ë‰^kš‹bÆ•dÄrÚHÿs$L–/P~¼ÑïlbAEYnÜ¡©ª*®a\ÀˆÅ1bú«Ïù“B|¦4À.‰¿r%îSËç fݳ ÿ¸“VÍ!/'''''§ ïºÜ’ùà|«Óî£M~g?”äÆô9Vl¾ÜEË?±KIåÍ , V#e›rïóÙü¬‘Y×ȸ¥¾‰ýåïPÂØ{¾òãÍ›.¦•åÅñ=Vd¶ÌE³/{¢F4’Î@´s3”ä%ôgO ãYFR#eyðþ¥¹å‡&PUíq‘°öú•_9OÂdsÐ*dz˜M/-Z´/©ám5Jï@CÁC§7?ÿôüù§l6gáBëeËìÕÕå-j¨Ö肤¬Œö÷ßqáá©rrR¾¾“þÙJJJ\Т†&¨ÑCUUÃ?ÿÄ_»–L$Šûø8,YbK$¢ïGP£4 FK``B`à#"‘àë;yÁ‚ b‚5ôA>p´´p‚ƒŸ>ýÇnÙ2ÃËËGÛÈôet€ˆÍ:t(º¨ˆúË/6ë×O•“ëtøJ€½ßÉÉ)ß¾=2=½pÞ<«ˆˆ5Êʲ‚V$Š FïG˜Lö‰ÿ<5Jåöíõh»¸AÞ_DD¤:t—Íæüõ—§‡Çx¨O&m@é-¨Ñûžêꆭ[#bc³\]ÇíÝ;U„Ôè}LllÖ–-áø«W} -¥Ôè}Ö´ukDtôkoo»;]„¾—å‡@Þ7}¬ å ôÔè]“™Y¼lÙ¿x<öæM¿1cÔ-¥W äjƒ‘èè ]]ÿÅ‹ƒèôï,hØ‘gÏž‰‰¡äÆ–-[:<´FïFþøãn@ÀÃ6nœÖ£~¶¥¥¥,+<<¼ÿä¡tÆÿþ÷¿Â‰¨ÑùÓÜÌZ¿þêÿ½=sf‘««iï2!“É}« ¥;DDD|›ˆee´%K‚++ékÌÍu-¥@Þ‘ÌÌâ%KÎËÊJDGoÐÒR´”¾m þŠØØ,7·ScǪ£.b Fÿ•+I+V\œ5kÜùóÞè¼YC Ôè­?·ukÄÆÓŽÿy`æÚ¡ imNgòvàò{,dy¶¨u-eVÎŒúúÔængGr”1;SÄíúH€4f_\;YW ‚ ¬¢‰×ÑD*ÜšAÍïE÷‹äL{y~íT}‚ ˆ¨9Þ}×¼&Ï’…p8ðúõWÿþ;îĉù¿þê4`å:M$•>N«æBO O…Á«ð¤Z„·Ÿõ°@Òrº~?Œâà‡xÙú&ûãiaù§—Sò~›¹øzYwþ@º#}¿£µ_ò¨íwrK+JòŸœ[¦xg‘ÍŠ˜Z¸ è-}úueðÑÜÌZ¼8HW×?..»³íl¡îöT]Ÿ,Ft»OGiHX¤¢lc;L~îÝ:AƳåJø J¹Ý/’Fq6 øÄé긦”ušRöAŸØ­ûÍÛ†‹[~âôÅRèì‚SVâ*Þ÷kÛ ‡Y 4zs—ºú¾‹Ó‹t^WÇ “O§¥FD¬™:Õp€K—3wÅLOøÈ 9—ò™ºuÛ |RdvyJ2Mg†•"†å(g{*xµ9 ‚0ªSö'ÑXE§RA$—=qœöùµ [Lä6ÄUs=Ê‚lÃj¶ fî¨êq+fi|no#ïˬüo‰z[´SÍ·P—€ ‚j–KÏe3·æÑÁÙ£e!‚dF»}A‡¿Ia}¢œ{¥³v‹ƒ|;_Ax¢¬  =ÊQÎ>(b»­‚”MÀã_u1‚ˆzÓwÞ+çðuôÕ¶Mr”›xüÌj+% ´§l»[öÕåvÑ5zy9mîÜSeeô[·Öš™i¼œšÝO*e /©0«06Ž>ÞcâD²uK%— ³ã?’l'k‹@CâÞ‹JeSóCí3n‹©n~}`ºç%© ±ùeE™—ݪŽWߣ~Ž¹Ô§¿Ms¶ }xÌI $Íw„„ì¶–†Ú6XåYÕÒ£tˆ_|›y4§îöôO1;òôcEuEþÃ=:1üîT# )eǼ½f]y[Rœ8þù¶eAYÏ:¦d¿{V(e:Q£ÓÎ O·ýQç};iWÎRï(½Ï KßS–¶œ˜ëXÀîüNÕ'm:X³øæûOo"6üãîyîãwîŒûE&òó+-,öÚÚ*.¦öGþÝ ]„~ß]–äO- /cs±ŒË­¼æ(=ú@í…ŸÑéF Œ 4ŠVÂ5ºA„zcÑ4 7ÑW`w¹¬58à¶ÔÓê™\¡Q¤t{›á¶zçÝrèÑÓ$”–=cðù¯ÖÐ¥¾‘Foj4¸ ¯Ž7 øÄAêã=d¶'sšàÏÑHÝ7)µwœ$”W>g|ɰÕeãƒJ8â€%8ߦ"Œç>*Ž×*y—ÀÌÚ­‡79QÀþ*újÛ¦Q0X‡ÐŠÖƒ3¶Ç;ù‘ýú/ ¡K+ïßWxxœ––&DF®ÑÐà"*ı®F-éÒ"òtÜm•0…‰^Å·â_''Ö깘Éò:×àHšŠâ€ÁB¬ê¼:Ù1z²­O#&-+-ÎÛa„¦/ŸP|àneg/—b*cÞ}løònˆ°éõÌ/Çc1µÏ7ÏŸj®§,#;raX /R¶Ù̃ê?ZRa”yó…´z 雂âím>½5s™™wꨵyÁVm3cIÚÀ][@—Ñ×nýUW«Š¡R¿HÚÏfŽS5\ºõ`M3 LíÇÚG/"gô7oJÝÝOkhÈݼ¹VГÅa¬œuÊ(Ág3”\~ÒÀ€Uut×zw!èêå)6*m_­¿êN†—Ó’®Ï+jl5S{›JþqãÜß—öˆñÛ™PÇ¿E`à6ô2RüÙ*-oöSšTôy¿)y£óÑbãÕq95õew·¶üà5ɧS©Ôü˜¿h¾ÜáäüÏ{Ð1¥d¤çtÙä£ÿæðM!<‘D‚ò¼ok±„ ^~¸L}^Q#O!«<»&iÊáA¸0àÔQÛâNmÛ_fKéë2îçƒ{t¯{z &11Μ“FFêáákde%-ˆi:L’~–ŒŸì¬'x­i.ŠW’Ëi# üÏ‘·|òã~g *ÊrãMUUq «àFŒ(ŽÓ_}Οâs0¥vIü•+qŸZ¾l)«m{¬^­Ÿýë•…•eo¢ú+³^íªùÙ:pKKBg‚ƒÕHÙ¦Ü{Ç|6?kdÖ5²#eýH9³ßRáö¶†ò8õ¢c ^Övÿ?sÊvMžóÛõäüòªâŒ[¿Ï÷Khèx &Þó•oÞt1µ¨,/þˆï±"³e.š8€‘”ÃäQ£æD<™Éü|<Â}´Éïl⇒ܘƒ>ÇŠÍ—»hö¼ëÊwƒÈ!Å“'ïtuý—-»Àbõ{[W÷btA¨w\€èKûœÀH\1 @¶!弘´}“ßç°nzwÅ׎÷Æ'­7m[T1 ùªy®¶N[|ì¾ÌfÅ›kÕpÛ‚ —–vf™µº8ÈÎÙÿ_%§]Y´‚+Þ&2Œ¢‰ÛîðØÃöR@{]J»äÖz[5<È›,<“Ù›‚ Â,¼½g®± ¡óÓ¯a/®N’þ£¾˜ñöß•Tp‰áNÛ¢KX¼‹Ï:9WW 1=¯¿O ~ŽÑÅ•Ü~óµWÅ€×pÜr»õàNᣋŠÑïßÏÒÖÞìçw…ÃéAÛt¯é¶ÑQº¢ç­û¢û2“¹bÅE77óãÇFç`M†~7ÝÈÈ´_½¶t©íÞ½sÐÙø²³˜³<›!^½Ý½ûzãÆk‹Û .q†²ÑïÝËZ³&déR»ƒÝP—‹8C6t¡PÒýüB׬™¼}»³ µ ž¡Y£GE½òó õñq@]ŽÂcýþýìuëB/¶Ù¹ÓEÐZP„…¡ºÄÅe¯\yqÁ‚ Ìx\>uêÔ>ɇËÅÔ×ËÈÈ4`±}5>b(“••eooß!qH=>þÍŠþÙêàAwÁºÜÊÊjÞ¼y\îùA º:ñª* *U‚yy*‰ÔÒW ‡0öööžžž!øp¾¾!5õã¼yS§ž>½pPBäÙ³¼ˆˆÔ¸¸l6vv6ž5kœƒƒÁÀŒdª £gg—zxœ²¶Ö Z:x't~ó¦4,ìELLfEÝÖv¤‡ÇøiÓŒÐÕ¿ú„¡`tžË--uÏŸ÷ŒÕ^UUCDÄ‹ˆˆ´÷ï+tu•~þÙjî\s55’ u )½Ñóó«ÜÜNêé)_½ê3¸Ö°e0Zbb2##Óž?Ï—““ôò²òð?j”Š u M·ÑKJêæÌ9¡¨(±FZº“ÜB‡'$äDF¦ÅÇ¿Á` ™3Éd‹‰õõ{…ð3ˆ^UÕ0wîI<{óæZyy©®O4™™ÅiÑѯ«ªê?‡àcedÇßç`g°½±±ÅË+ ¼œµNSS^Ðr¾Gq15<üÅ;¯ß¿¯04T÷ò²tv6VUECðePÍæ.Z”]rë–ßȑʂ–ÃŸÆÆ %=""õåËBEE"™l‰†àdð†‘Õ«/?~üîÖ-¿Ñ£U-§#l6766+22íÉ“wX, Á…„ÁgôíÛ#¯]K õ±±Ñ´–¯xñ¢ 22-:úuCsòäÑ..&Ó§,¯ÈC¡îpìX¬•Õ[Û‘m)gÎ$„„Lž? ""uÆkºÿò‹ Õ*•qóæËÈÈ´ÌÌâaäÑ\ÈÞýêÕd,âpàÍ›Ã?|¨¶³¹yóõU«ëò¶üñãwx ³%T_»–B¡¤—–ÖknÞ<}Ö,AÏe‡Òc„´F÷ò xþ<ŸËýJ‡•‘‘¸zu¥±±f ¨©i¤PÒy!¸¦¦¼§§…‹Ë84¼£ÑËËiû`˜0,#&† _ÝOË65±îÞ}Íëh%!Ÿ3ÇÌÃc<‚„1t {Á@Â`@S«û¹UVÖûø\œ8q¤¿ÿŒÎŽa$1±u¬Cs3ÛÁÁ `‘““‘¸¸0Þ”^ t5:— ›šþ^SÓqV11— ¯Zå¸víäîO„ûêUÑâÅAµµ BVÖþo{«·u(/§YX '“-œåäA1”!t5Ö£G¹55íS°X #'ŽØ¿ßmĈaÝÏêÂ…§{öÜBÒØÈ|ðàíôécyÿÕ~¬ƒ––ÂüùV³fÓ×GCð!‹Ð=$ä9q8‚ƒÑÖVøã;;ýîgÂfsw츚À` ë×_ØÙéߺÕÚÑJJJ|ölÓ#GÈh. WèRYY?~üï¼Æ<+&†ÝºÕyÉ› «©i\ºô|FF—ûÕÚ– D$™ÖÖ#<<,fÎ4F;¢ˆÂU£ßº•Îå11,› Ïœi²{÷¬žöÛÎÌ,^¼8ˆJmêàrA'ê8à†ÇA:ÉdR©TH\¸ðdøpÿ)&&êÒTVÖÔååå ÂÝ»¯ýüB9˜Ãá3¡ ‚ táq9‹Å c2™]ŠÒ'''žžÕÑèUUU}£¨‡À02l˜„³³®&Ãxÿþ}÷ÏUTTŠŠúðÐY0ÃHFFQAAµ®®Rß(þ1¢££—,Y"hƒŸþùêÕ«==«£ÑQRR24èe”yLžìØ‹³^½Êô·!D¸^F{‡§§±µµÖ·q›ŒŒÄ·0êèEÜ‚2À £+)I))Iö ¡EÔ ¡ J—ôÞè¬â»{ÝŒ•pIjÙ. xQ×ÚpMr”1;SôußD”®Ø¡ imNom€„ËCì±åÙÏw‘•sÀ£¾>µ¹óó;Ðí§×¿¾à;Y„ Â’tmþ_Îîò4!¦—F‡«î¬œà/¼œQTöáÑa«7þöSftÞæ-i¾#èÀAþ€TVÖ§¥} €^à4‘Tú8­š =5<¯Â“jÞ~ÖÃIËéú}>Û.\ysɤ÷57Gå”UW•äÜ?êTùç,‹E½iîz£§^JÚý2ÌߘÐüù¯»²•î~×~y´Œÿ˜¼ÆT/ž•ArÔÜ뙺Zë‡&È­¯oŽ‰ÉŒˆHMI)€ ¨¨è¨ÀWÂè>†®f¸e÷s+5eãudš¬-’q=î5“šßÇgƒ±‡M¤û¼ÔÆW—ã!2åÔªIÒ ¨ä¶;ÆiC3Ž8ˆßèzYÅFÞ¬·ÞÛ°­«FÁqýÏ i—žÖÀ€´\õ±P„ ˆ =y3¥˜õåG“Uå?e¸AíŸüo—°€UDñw!AD2pÙWÁ¡G9’æýmš{´]èÃcNJX i¾#$d·µ4Ô¶A´øuͨä5cŒ×8÷e ãsõÀïIñ²mxºí:ïÛ/-Ÿßñùò}耟ìþ|LÈ×dggggg#]á,¥´ôicû¸êª¸¶z3B£8ˆ)-{ÒÀKo~µMktìe¤ƒ´i@n’Ÿ†Ô”ð*Aaž2•šp!ÿ¹¯Áîr—w·¥žVÏä"H«Ñ9]ŠÉÎÎÎÈÈŒ‹Ë^»öʈþêê¿jimRUÝÀ÷ Ã]f80\¿~ýÛûÿ ôûî²$ÏxjaÀx›‹e\nå5GéÑrh/ü4ˆN7j`¡Q°®Ñu‚ Ô“ˆ¦¹‰ÞR)ÝÅÞfx íŸÞü½baFÁƒó{Wϱ.1më­Â–¦äN³ÅœoS‘¦üžo2ŸÄR.ÙÝxÖd2™L&wyØ·ô2ê2R¢?Ì©ãÚJµU¶ÌO/>õ*b ¦j¬ÑÖ4Í4q¡¥4°*ßU0þóÖîwDëmqi^ì=ÙÖDŒ˜´¬XÄ<}úñÔ©çTj3‡åuç‚áN£yóÎ 1zee%+ÓÕQı®F-û¥'<ÏÓq·UÂ` ‰^ÅAñ¯ekõ~1“å] ޤ©(,Àªîô–2 BSY9!"øÀÝáîÊü,9ŒzŽê$ïÝ“½w¤¹ìEØ^ï^Ú/·uš-–¤=ŒÐÉó-æ“XɺßÈîOzit¹*ÿûçb΢]F·%¤ð¦³ 5«_öm;wé÷R¦L§ÙBêäùb3V}›(CõßÈîW:ÔðÝ ]¸•·«aÕæþ›]\þ15lËD¢Ø¸ßÓ‚ 4ŠÄM6Df•”dSüÇ$ƒ>ÕðâZ¢Ÿ¶¸þÊ+iŸ*>½¼ºÆ@b„zscò¯:X5Ï€gÊKsî˜D$Lú·„ƒÐ(RcþÌiî2ÔàiÎÍ-?zôž™Ù着45‡Lè‚ Œç«”ÃV&2x ͯüu2žñõ‚ â ®º6¥©u[Ú4à½Ó[Ú 6½Ú=ZLwSR‚°ŠãBBî2¿lÀÔØEJ†çßqÙÅUU¥9 ‹u%Çü–ñ'Õ* ßóå›ÈWv?†.½4:‚ -EÑ{æŽUÀÄÕ'ür"©¶5t£QHV[b,б;®âË-†o/úX«â8• +.¼i„nzwÅ×NC ¤õ¦m‹*f!ÂÌ:h%°ÖÁÅ]\{Í\.œ’òaçΛÛù:~ð¡Þq!¢{,ís#qÅ0Ù†”óî8?Çð¿¥íü×?[§->v_f3â€Íµj¸mAà†ì˦*â@LÅÔ}ï½ÒÙ“j'€ÿóå—8ÀFï8”îÍ›7€¾ï¦ÛGâ|á«™ÉdÇÇ¿¹qãåÇ90 CÄk[,-ýŸ´£‡‡‡{yy!ƒ¶EH ðVÊ ïé‰ó i.}WÍÆ ä\ø~Ö¬q³fã}0 O}ñ¢@H¢s”g ŒÎÊ9hn´·Ù-pJ'/ùýŠŒŒÄ¼yVóæYUVÖúT#$Õ9Ê3F½ë-¼k ú>ÊÊ2ÊÊ]6ç¡ MÐnº("jt‘`÷Gk£ºšQ\L£R;ÎÉßÙP:t [d(=<<“ByÓ̓íìô¯__ݯzP„¡º¬Xaéè¨Û#±XŒµõˆþÖƒ"„t¬Ñ!ªªªzôèÑÀKaäÿ{aa¡jg§ÙÓY?wîüiÆŒñÛ·G€tX'£=‚Ì›gõÃJû, @›;{ʼyózqVÇ/£ÍÍÍÝ߸¸Óôõ‡íÜ9}ܸŒH"‰Éɼ½/0-l6ŸÞ‹X,da1üæM¿¾ÓûC0™Ì˜˜.GÛ3ÌÍÍuu»õÞášM70ðѾ}·±X†‘Y³ÆíÙãÚÓIF?}ª]´èÜÇ5ß&Â` ™3ÿ}ŽðL¿ˆ2`—Ñëê&&»9€Ãaùå[ÿ=šß™ÁhY»öJ\Ü›—†Ãa%%ÅÐi£Eìï¿ÿ.h _ËÍ­((¨†a„×Ë0;»äÊ•ç22FFÝ gÅÄp³g›øgÏòÚNÁã±3fŒ‰ùÕÊJ·¨ˆzîÜãþ‰OI)èê*õhþu”ÁˆpÕè€gÏÞ{zžiŸAµC‡Ü,-{œEG¿öó»ÂáÀ\. ²ü§ŸÆðþ‹×·122-!!GRRÌÉɈL¶°µ‰¾U„Îè‚XXì++£uHÇã±þÍ’%çÛ’Çb!SSíË—WHÝ]M·O Ñš¢£_GD¤¦¥*+Ë8;›Ì›gih¨>P~!5:‡›šî©­mýF‹Á@ÚÚŠ††jKµ&h~~UTTú/ kxA<™l9lÄ„Ôè€C‡¢Ïž}Äáp€Ö¬™Lž?àÁƒ·ÞÞÖ­›²iÓtA«,çñãÖ ‹ÅLjèá1ÞÑq4‡ñˆðpìX¬•Õ[Û‘m)7o¾ôó Ý¿®··…µ§¾¾ùþýìÈÈ´gÏò† “qq1ñô´;¶‡sd£ô3Bmt¾œ>ýàÏ?c;;›ZËW”–ÖQ(é×®¥Tëë«ÌšeâåeÕýo[(ýÊà3:à÷ß)—.%†…­¶²êqwÍ€ÄGE¥S© ss2ÙbÎ3" âÉ 4:— ¯\y1%¥àÖ-¿‘#•-‡?\.üüy~DDjLL& #h/X¥Ñ--œ ÎTGE­ÓÔ”´œïQ_ϼ?+:úõÇ9ŠŠD—q³f™ô¨wÊ3XhnfÍŸ¶¸˜J¡¬¡py9íîÝÌððÙÙ¥¼ žL¶ÐÒR´.‘`P_Ïôð8Å`°(¿AÔëÝ»ŠÈÈ´ˆˆ55h?0 n£jkçÌ9)&†»yÓWVv@{ü mÈnÝJçp¸NNFã ÐQ ýÁ 7: ¬Œ6{ö Ùë×WÆn†íG‰ñhß· £Þ¾-ss;em="(héàmÖà¹s'#5õãȑʮ®ã<<,´µÑ ¾"F¤¥}œ7/pÊÃÓ§öδïßWܹ“‘VRB57×™5kœ»»¹œœ” u b†ŽÑiiçÏ?ko?*0p‰0×ëEEE¾¾¾L&óû‡!ÔØH¤Ñdd ÑÒ*–’Ø”;†‡‡G÷RF¤¦~œ?ÿ¬££A@Àb¡õ:oQ2™ÜÍã9¨¶VBA‰Ã ²•¯û‰¤¤$kkë-ð2&m…ÅðÐЕ œ[»6äÔ©EBëuЫ…xPxðV2êÂëƒ^ci©{á‚w\Ü›Í›Ãøµ¹ÛÒ£eÌÎ}÷t³Ð²H{鮲ê~¡Å7:ÀÑÑ 4ÔçÁƒ·Ë—ÿÛÒ´œî!>Âi"©ôqZ5zjx* ^…'Õ"¼ý¬‡’–Óõ%Q¨¢å®àS™s™ÜÞam="4Ô'9ùƒ·÷y&“-h9ÝAÊÐÕ —{?‡Œ×‘i²6¶ò×ÓèÐü>>Œu5éëîšÝ+TLËÉkæH©A6«H`a1<"bMFFñüùg[-§K 9s—QÌô„Lšs)O‘©[·ÍÀ'Ef1`—§$ÓtfX)bèQŽr¶§‚W›“ £:e€UDñw!AD2pÙWñÕ¯\›°ÅDÞhC\5У!È6¬iݨ%u³P^@¯t¤1ëìS‚$F¸I¡ó>p5ç…úÚ¨‹ADÔ›¾ó^9°óŽJŒ?SÄ€l,9üž ÷Ós˜?ßõ}e$*Fk†‡¯ÎË«ôô  Ñš-§ pjv?©”%¼¤Â¬ÂØ8úx‰ÉÖ- ”\&hÌŽÿH²¬- ‰{/*ý•M͵Ï8¸-¦ºùõéž—¤6Äæ—e^v«:B^}úùEœK}úÛ4÷h»Ð‡Çœ”°@Ò|GHÈnkièó¾›…¶Ñ±ô†ç[g¬º7|ﳂÒ×gÌŸüýŠhJÛ=ý—(½Ï KßS–¶œ˜ëX´¦ÍVË£¤Ñ¤.õîò¢“k`„ž~;_ÍuºvÇ•4ûDÄÈÎ.12ÚåârœFcJÃõë×»qçé÷ÝeIžñÔ€ñ26˸ÜÊkŽÒ£äÐ^øinÔÀB£8`%\£ëA¨7&MÞ=÷U#Ø].ãòòà¶ÔÓê™\¡Q¤t{›á¶zó*mð‰Ã§ôœÇÞJâöŸKgfîÒÅ›ä>óQ‘p¼VÙš˜µ[or¢€ÍHZ¥¡¼èQCýó4Æùyë)νGk|ê­ªîó¼ËC&“ÉdrWG}…Õè< ÕoÜð-)©ss;UYI´œï@ëjÔ’þ(=!"OÇÝV ƒQ˜èeP|+þurb­ž‹™,/HÆ‘4Ń… ØÕyu²côd[Ÿ+FLZVZœ·Ã(M5^>¡&øÀÝÊNBºWhJçÒŠI£?—.®n¢.§¶€.£¯MlMT«Š¡R9’†vàyLVVlºŒóü…?I¼Œ~ýö¿çˆ‡a Ÿ9£ôõUbc7MŸþ¿œœ2AËé Œ‚•³N%øl†’ËO8°ªŽîZï.]ý <ÅF¥­—ÒW‹tàä´¤ëóŠ[;!ìFz=“gk)Ã?nœûûÒ¾1~;ê:ù¬ÐÝBÛøºt…á2ôÜõ¼Ò[ʲÊYàä‡ËÔç5òJd•g—Ã$M9 šz§Ç\gZ8™ºš5=ˆ¦šÏ3ë—!‘¢ht€²²ìÍ›¾ZZ nn§SS? ZÄ4&I¿ KÆOvÖ¼Ö4ÅŒ+Ɉ崑,3&a²|òã~g *ÊrãMUUq «àFŒ(ŽÓ_}Οâs0¥vIü•+qŸZ¾lô®Ð/¥]ê5ìñf¿³I…åùÿ]"Ÿ€„±÷|åÇ›7]L-*Ë‹?â{¬Èl™‹&@$+¯1ùÿüóaô,C)S7ƒ‚Óÿ{gø³©_ÚsDÔèYYɰ°U:óæ>xðVÐrø!iàlAD;·Ï?æýÙS‡Èx–Q§c0¤,Þ¿4·üÐäªê£=.Ö^¿²@½ý T “ÍA«¸§VÏb6½<´hѾ¤¤m£—…~)ÝêÐÝ ¿Ù Wë›5m« ey &xfþމÚêú³/ˆ¯½yc€Q´ó€ž‹¹,„Q´vÕÜQd[¥þ±äPëÞS¸\Øß?""âÅ‘#ž¶¨4¯?ºˆßù×MW¤û£÷,sô¨§¼¼Ô¦M×ëêšV¯v´"”~AÔ€ hçNII±î0™ì_u´"”¾5z+¿þꤤ$½}{dQQí‘#žèä*C Ñ}ý–… ­oÞ\ûßoçÎ=YUÕ h9(} jô¯°°~çÎú†æôéDz³K-¥Ï@ÞÅÛ·×éé)Ï{2>þ å ô ¨Ñù ++yõª§§…·÷…Ó§ZJ€¾Œò‡Ã<è>z´ÚŽ‘……µ‡¹÷ùëé¹sçú6CÑ¡  @W·gsS¢Fÿ ZËÉI®[wµªªþäÉ…22]}ïêêêX,ÖÇǧOrMzt¼¨í™™ÅË–ý‹Çcƒƒ—Ž£&h9(½Ñ»ÆØXóáCCCõ™3?´”Þ€ÖèÝA€€‡þ3{¶é‘#žƒq"vQ5zÏHJú°jÕ%I28x©Ð.ˆ‡ò-hèÒ3¬­GÄÆn”‘‘pv>ýZÐrPº jô£ªJŠˆXãìl²jÕ¥£Gc¹\t*çAºôžÐФ]»niœ<¹@GGQÐrP¾Z£÷ž ¬?Þ†ÃaŸ>ý¶W˜Akô…ÃÏžM8r䞕Ո¿ÿþYM$hE(|@Þ7dd­[ZUU¿k—ëÂ…Ö‚–ƒÒÔè}“É>vìþ™3gÎ4>|˜Œ."'T Fïcbc³¶l —À9âéà` h9(­ Fï{ª«¶nˆÍru·wïeeYA+BAÞo$%}à@õõ¼nÝTtª`AÞ0™ì'þ x8j”ÊáÃäqã´­HtAÞïTTÐ÷ì¡Ü¹“ag§¿wïUA+EP£±±Y‡EQùÅfýú©h›Ìƒ}à€aäîÝ×FWW7x{ÛùùMé«!K(]‚} a0Z‰_ßÉ L@»¶÷;¨ÑCUUÃ?ÿÄ_»–L$Šûø8,YbK$Š ZÔP5º ih`^¾œxúôC6›;ožÕÚµ“ÑF÷~5ºà¡Ó›ÎŸzþüS6›³p¡µ··½††œ E 5P£ FKHHÒùóO*+é3gš¬Z倶»÷!¨Ñ… F󂃟ÄÇ¿12R_±bÒœ9fèWÕ> GkØ¡tŸ-[¶üÈsS““sQQY‹Á -î=cøðáß>t¦®þ¢°°p„ 7nü‘Lšš8’’ö}%IHJJ:~üø·é¨ÑûMMM2™,h¢ÒI(ŽŽE P££ˆ¨ÑQDÔè("jtA²CÒÚœÎäíÀå!öXÈòl—·ÏÊ9`€Q_ŸÚÜíìèQŽ2fg>ŸÏŸ–×}ShwÊ&P£ §‰¤ÒÇiÕ\@è©á©0xžT‹ðö³HZN×—èÓ"ÅG P!5º 1t5ÃåÞÏaãudš¬­|Æõ4:4¿Ïc]M¤û¸L)A*xP£ 9s—QÌô„Lšs)O‘©[·ÍÀ'Ef1`—§$ÓtfX)bèQŽr¶§‚W›“ £:e€UDñw!AD2pÙWÁiŸ/\›°ÅDÞhC\5У!È6¬iݨ%u§Ðæ¼P_u1‚ˆzÓwÞ+ç=ÊQÎ>(b»­‚”Í¿eð·enÍ£ƒ³GËBÉŒv;ú‚^å(7ñø™ÕVJ"hOÙv·ŒEM<6ßB]‚ "¨Y.=—ÍèìŠXÅQþS†K@DÐþÉÿv »÷÷zÀ?‹ d2™L&wqPSê 1«ó¥Ü–·ûGË9Sj¨Ñsät6¦5#TÊt)¥¥O„FqÀE›ßSó¯z*ˆÛ_­lÊøm4~ØœOòËŠ2£¶[dæÜ®…ÅAÚ4  êÉs9ߘJ‚ «8.$ä~!óËF×…2R7ëâÔ祖¾?à@·>ùÕªDÞÔçü³¼ªŠ[|Êb$®PÆn¹ý¶¤83t¡2Öè¯Ô €Ô=N=ÉûôæÎK‚¸Ùâ™JÝ•WR?VTWä'’‡I8\ãEÍYûÆÔ=O=~Wø6îÏéòRöç>±»¸£×¯_çëjÔèýE·ŒŽÐï»Ë’<ã©…ãel.–q¹•×¥GÈ¡½ðÓ :ݨyö’p®C¡Þ˜D4 ÈMôU#Ø].ãòòà¶ÔÓê™\¡Q¤t{›á¶zsï m|î£"áx­’—?3k·ÞäD¡Q°çÛT餬úx‚íÉœ&A`VÞ\KqÀ`B+Z³ÊØ>oôgFm§UzëƒcÄ;¹¢Æ~RS«`A„]xÊTjÂ…Rî÷ohgFGCÁBëjÔ’þ(=!"OÇÝV ƒQ˜èeP|+þurb­ž‹™,GÒT ‚`UçÕÉŽÑ“m}x1iYiqÞ£ 4Õxù„šàw+;méªPNm]F_›ÈËR\m¬*†ZHå–¤=ìó8×oË’¶Ù̃ê?ZRa”yó…´z œÂ¨áÒ­Yiši`hŸÞ? Ü<ª¹ž²ŒìÈ…a%œN®ˆSù®‚ñŸç0 A„×YûŠQö¶’Õ»]°`¬œuÊ(Ág3”\~ÒÀ€Uut×zw!èêå)6*m]‘ ¨ÝIx9-éú¼¢ÆÖ(a7Òë™<«IþqãÜß—öˆñÛ™P×Iì® ÅË—©Ï+jäÎ*Ï.‡Išr8žL›>eá5ɧS©Ôü˜¿h¾ÜáäüÏ{6àÔ¾ûØÀ“ÚRúº¬¥äŒ§ûÑbãÕq95õewKtrEIC4'¦ùRÍ¿94®—ÃÉQ£ 1M‡IÒoÂ’ñ“õį5ÍE1ãJ2b9md'UrÜòÊ7úM,¨(Ë;4UUÅ5¬‚ 1¢8FLõ9RˆÏÁ”FØ%ñW®Ä}jù²Ñe¡’&Þó•oÞt1µ¨,/þˆï±"³e.šßôÿû¶,FÊú‘rf¿¥ Ã-ìm åq8÷Ñ&¿³‰Jrcú+6œk%-¡3ÁÁj¤lSî½c>›Ÿ52ë`C>WÔ0v™§ì½ [C_U¥_ó3Q6ߟÝÒÛýýˆ¥×t/FG„zÇ…ˆî±´Ï ŒÄÃdRÎ GiqÕµ)M­ÛÒ¦Ÿ8pÓ»+¾vb ­7m[T1«Ýÿ"×?[§->v_f3â€Íµj¸m£…ÂŒ·ÿ®œ ‚H wÚ]ÂêLÉWe!ì’[ëmÕð o²ðLfCÅA\Éí7_{U x Ç-·K ®x›È0Š&n»ÃcÛKíuɵ|®f¼½èc­ŠàT&¬¸ð¦îênv££#Œú OOO@xx¸ …z”£òj£'NZÐ'¨ððp//¯o]†.(":ð¥?‘Àœ-h 5:Šˆ€E$@Ž" FG P££ˆh«K?òäÉ“©S§ Z…hQYYÉ75zÎè"äääøV.è—Q‘ÑQDÔè("jt‘5:ŠHð S ¢ T@IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/classes.html0000664000175000017500000001254612414127676021740 0ustar00execexec00000000000000 wnckmm: Class Index
Class Index
A | C | P | S | T | W
  A  
  P  
Selector (Wnck)   Workspace (Wnck)   
  T  
ActionMenu (Wnck)   Pager (Wnck)   
Application (Wnck)   
  S  
Tasklist (Wnck)   
  C  
  W  
Screen (Wnck)   
ClassGroup (Wnck)   Window (Wnck)   
A | C | P | S | T | W
libwnckmm-1.0-0.1.1/doc/reference/html/functions_o.html0000664000175000017500000001444112414127676022625 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- o -

libwnckmm-1.0-0.1.1/doc/reference/html/a00025.html0000664000175000017500000001176412414127676021113 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Pager Member List

This is the complete list of members for Wnck::Pager, including all inherited members.

gobj()Wnck::Pagerinline
gobj() const Wnck::Pagerinline
Pager(const Screen* screen)Wnck::Pagerexplicit
set_display_mode(PagerDisplayMode mode)Wnck::Pager
set_orientation(Gtk::Orientation orientation)Wnck::Pager
set_row_count(int count)Wnck::Pager
set_shadow_type(Gtk::ShadowType shadow_type)Wnck::Pager
set_show_all(bool show_all)Wnck::Pager
wrap(WnckPager* object, bool take_copy=false)Wnck::Pagerrelated
~Pager()Wnck::Pagervirtual
libwnckmm-1.0-0.1.1/doc/reference/html/a00005.html0000664000175000017500000020412212414127676021101 0ustar00execexec00000000000000 wnckmm: Wnck::Screen Class Reference

This represents a screen. More...

Inherits Object.

Public Member Functions

virtual ~Screen ()
 
WnckScreen* gobj ()
 Provides access to the underlying C GObject. More...
 
const WnckScreen* gobj () const
 Provides access to the underlying C GObject. More...
 
int get_number () const
 
int get_width () const
 
int get_height () const
 
void force_update ()
 
std::string get_window_manager_name ()
 
bool net_wm_supports (const std::string& atom)
 
Windowget_active_window () const
 
Windowget_previously_active_window () const
 
Glib::ListHandle< Window* > get_windows () const
 
Glib::ListHandle< Window* > get_windows_stacked () const
 
Workspaceget_active_workspace () const
 
Workspaceget_workspace (int workspace) const
 
int get_workspace_count () const
 
void set_workspace_count (int count) const
 
void move_viewport (int x, int y) const
 
gulong get_background_pixmap_xid () const
 
void set_showing_desktop (bool show) const
 
Glib::SignalProxy1< void,
Window* > 
signal_active_window_changed ()
 
Glib::SignalProxy1< void,
Workspace* > 
signal_active_workspace_changed ()
 
Glib::SignalProxy1< void,
Application* > 
signal_application_closed ()
 
Glib::SignalProxy1< void,
Application* > 
signal_application_opened ()
 
Glib::SignalProxy0< void > signal_backgroupnd_changed ()
 
Glib::SignalProxy1< void,
ClassGroup* > 
signal_class_group_closed ()
 
Glib::SignalProxy1< void,
ClassGroup* > 
signal_class_group_opened ()
 
Glib::SignalProxy0< void > signal_showing_desktop_changed ()
 
Glib::SignalProxy0< void > signal_viewports_changed ()
 
Glib::SignalProxy1< void,
Window* > 
signal_window_opened ()
 
Glib::SignalProxy1< void,
Window* > 
signal_window_closed ()
 
Glib::SignalProxy0< void > signal_window_manager_changed ()
 
Glib::SignalProxy0< void > signal_window_stacking_changed ()
 
Glib::SignalProxy1< void,
Workspace* > 
signal_workspace_created ()
 
Glib::SignalProxy1< void,
Workspace* > 
signal_workspace_destroyed ()
 

Static Public Member Functions

static GType get_type () G_GNUC_CONST
 Get the GType for this class, for use with the underlying GObject type system. More...
 
static Screenget_default ()
 
static Screenget (int index)
 
static Screenget_for_root (gulong root_id)
 

Protected Member Functions

virtual void on_active_window_changed (Window* previously_active_window)
 This is a default handler for the signal signal_active_window_changed(). More...
 
virtual void on_active_workspace_changed (Workspace* previously_active_workspace)
 This is a default handler for the signal signal_active_workspace_changed(). More...
 
virtual void on_application_closed (Application* app)
 This is a default handler for the signal signal_application_closed(). More...
 
virtual void on_application_opened (Application* app)
 This is a default handler for the signal signal_application_opened(). More...
 
virtual void on_backgroupnd_changed ()
 This is a default handler for the signal signal_backgroupnd_changed(). More...
 
virtual void on_class_group_closed (ClassGroup* app)
 This is a default handler for the signal signal_class_group_closed(). More...
 
virtual void on_class_group_opened (ClassGroup* app)
 This is a default handler for the signal signal_class_group_opened(). More...
 
virtual void on_showing_desktop_changed ()
 This is a default handler for the signal signal_showing_desktop_changed(). More...
 
virtual void on_viewports_changed ()
 This is a default handler for the signal signal_viewports_changed(). More...
 
virtual void on_window_opened (Window* window)
 This is a default handler for the signal signal_window_opened(). More...
 
virtual void on_window_closed (Window* window)
 This is a default handler for the signal signal_window_closed(). More...
 
virtual void on_window_manager_changed ()
 This is a default handler for the signal signal_window_manager_changed(). More...
 
virtual void on_window_stacking_changed ()
 This is a default handler for the signal signal_window_stacking_changed(). More...
 
virtual void on_workspace_created (Workspace* workspace)
 This is a default handler for the signal signal_workspace_created(). More...
 
virtual void on_workspace_destroyed (Workspace* workspace)
 This is a default handler for the signal signal_workspace_destroyed(). More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Screenwrap (WnckScreen* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a screen.

Constructor & Destructor Documentation

virtual Wnck::Screen::~Screen ( )
virtual

Member Function Documentation

void Wnck::Screen::force_update ( )
static Screen* Wnck::Screen::get ( int  index)
static
Window* Wnck::Screen::get_active_window ( ) const
Workspace* Wnck::Screen::get_active_workspace ( ) const
gulong Wnck::Screen::get_background_pixmap_xid ( ) const
static Screen* Wnck::Screen::get_default ( )
static
static Screen* Wnck::Screen::get_for_root ( gulong  root_id)
static
int Wnck::Screen::get_height ( ) const
int Wnck::Screen::get_number ( ) const
Window* Wnck::Screen::get_previously_active_window ( ) const
static GType Wnck::Screen::get_type ( )
static

Get the GType for this class, for use with the underlying GObject type system.

int Wnck::Screen::get_width ( ) const
std::string Wnck::Screen::get_window_manager_name ( )
Glib::ListHandle<Window*> Wnck::Screen::get_windows ( ) const
Glib::ListHandle<Window*> Wnck::Screen::get_windows_stacked ( ) const
Workspace* Wnck::Screen::get_workspace ( int  workspace) const
int Wnck::Screen::get_workspace_count ( ) const
WnckScreen* Wnck::Screen::gobj ( )
inline

Provides access to the underlying C GObject.

const WnckScreen* Wnck::Screen::gobj ( ) const
inline

Provides access to the underlying C GObject.

void Wnck::Screen::move_viewport ( int  x,
int  y 
) const
bool Wnck::Screen::net_wm_supports ( const std::string &  atom)
virtual void Wnck::Screen::on_active_window_changed ( Window previously_active_window)
protectedvirtual

This is a default handler for the signal signal_active_window_changed().

virtual void Wnck::Screen::on_active_workspace_changed ( Workspace previously_active_workspace)
protectedvirtual

This is a default handler for the signal signal_active_workspace_changed().

virtual void Wnck::Screen::on_application_closed ( Application app)
protectedvirtual

This is a default handler for the signal signal_application_closed().

virtual void Wnck::Screen::on_application_opened ( Application app)
protectedvirtual

This is a default handler for the signal signal_application_opened().

virtual void Wnck::Screen::on_backgroupnd_changed ( )
protectedvirtual

This is a default handler for the signal signal_backgroupnd_changed().

virtual void Wnck::Screen::on_class_group_closed ( ClassGroup app)
protectedvirtual

This is a default handler for the signal signal_class_group_closed().

virtual void Wnck::Screen::on_class_group_opened ( ClassGroup app)
protectedvirtual

This is a default handler for the signal signal_class_group_opened().

virtual void Wnck::Screen::on_showing_desktop_changed ( )
protectedvirtual

This is a default handler for the signal signal_showing_desktop_changed().

virtual void Wnck::Screen::on_viewports_changed ( )
protectedvirtual

This is a default handler for the signal signal_viewports_changed().

virtual void Wnck::Screen::on_window_closed ( Window window)
protectedvirtual

This is a default handler for the signal signal_window_closed().

virtual void Wnck::Screen::on_window_manager_changed ( )
protectedvirtual

This is a default handler for the signal signal_window_manager_changed().

virtual void Wnck::Screen::on_window_opened ( Window window)
protectedvirtual

This is a default handler for the signal signal_window_opened().

virtual void Wnck::Screen::on_window_stacking_changed ( )
protectedvirtual

This is a default handler for the signal signal_window_stacking_changed().

virtual void Wnck::Screen::on_workspace_created ( Workspace workspace)
protectedvirtual

This is a default handler for the signal signal_workspace_created().

virtual void Wnck::Screen::on_workspace_destroyed ( Workspace workspace)
protectedvirtual

This is a default handler for the signal signal_workspace_destroyed().

void Wnck::Screen::set_showing_desktop ( bool  show) const
void Wnck::Screen::set_workspace_count ( int  count) const
Glib::SignalProxy1< void,Window* > Wnck::Screen::signal_active_window_changed ( )
Slot Prototype:
void on_my_active_window_changed(Window* previously_active_window)
Glib::SignalProxy1< void,Workspace* > Wnck::Screen::signal_active_workspace_changed ( )
Slot Prototype:
void on_my_active_workspace_changed(Workspace* previously_active_workspace)
Glib::SignalProxy1< void,Application* > Wnck::Screen::signal_application_closed ( )
Slot Prototype:
void on_my_application_closed(Application* app)
Glib::SignalProxy1< void,Application* > Wnck::Screen::signal_application_opened ( )
Slot Prototype:
void on_my_application_opened(Application* app)
Glib::SignalProxy0< void > Wnck::Screen::signal_backgroupnd_changed ( )
Slot Prototype:
void on_my_backgroupnd_changed()
Glib::SignalProxy1< void,ClassGroup* > Wnck::Screen::signal_class_group_closed ( )
Slot Prototype:
void on_my_class_group_closed(ClassGroup* app)
Glib::SignalProxy1< void,ClassGroup* > Wnck::Screen::signal_class_group_opened ( )
Slot Prototype:
void on_my_class_group_opened(ClassGroup* app)
Glib::SignalProxy0< void > Wnck::Screen::signal_showing_desktop_changed ( )
Slot Prototype:
void on_my_showing_desktop_changed()
Glib::SignalProxy0< void > Wnck::Screen::signal_viewports_changed ( )
Slot Prototype:
void on_my_viewports_changed()
Glib::SignalProxy1< void,Window* > Wnck::Screen::signal_window_closed ( )
Slot Prototype:
void on_my_window_closed(Window* window)
Glib::SignalProxy0< void > Wnck::Screen::signal_window_manager_changed ( )
Slot Prototype:
void on_my_window_manager_changed()
Glib::SignalProxy1< void,Window* > Wnck::Screen::signal_window_opened ( )
Slot Prototype:
void on_my_window_opened(Window* window)
Glib::SignalProxy0< void > Wnck::Screen::signal_window_stacking_changed ( )
Slot Prototype:
void on_my_window_stacking_changed()
Glib::SignalProxy1< void,Workspace* > Wnck::Screen::signal_workspace_created ( )
Slot Prototype:
void on_my_workspace_created(Workspace* workspace)
Glib::SignalProxy1< void,Workspace* > Wnck::Screen::signal_workspace_destroyed ( )
Slot Prototype:
void on_my_workspace_destroyed(Workspace* workspace)

Friends And Related Function Documentation

Wnck::Screen* wrap ( WnckScreen *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/screen.h
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_k.html0000664000175000017500000000742712414127676023642 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- k -

libwnckmm-1.0-0.1.1/doc/reference/html/graph_legend.html0000664000175000017500000001360012414127676022712 0ustar00execexec00000000000000 wnckmm: Graph Legend
Graph Legend

This page explains how to interpret the graphs that are generated by doxygen.

Consider the following example:

/*! Invisible class because of truncation */
class Invisible { };
/*! Truncated class, inheritance relation is hidden */
class Truncated : public Invisible { };
/* Class not documented with doxygen comments */
class Undocumented { };
/*! Class that is inherited using public inheritance */
class PublicBase : public Truncated { };
/*! A template class */
template<class T> class Templ { };
/*! Class that is inherited using protected inheritance */
class ProtectedBase { };
/*! Class that is inherited using private inheritance */
class PrivateBase { };
/*! Class that is used by the Inherited class */
class Used { };
/*! Super class that inherits a number of other classes */
class Inherited : public PublicBase,
protected ProtectedBase,
private PrivateBase,
public Undocumented,
public Templ<int>
{
private:
Used *m_usedClass;
};

This will result in the following graph:

The boxes in the above graph have the following meaning:

  • A filled gray box represents the struct or class for which the graph is generated.
  • A box with a black border denotes a documented struct or class.
  • A box with a grey border denotes an undocumented struct or class.
  • A box with a red border denotes a documented struct or class forwhich not all inheritance/containment relations are shown. A graph is truncated if it does not fit within the specified boundaries.

The arrows have the following meaning:

  • A dark blue arrow is used to visualize a public inheritance relation between two classes.
  • A dark green arrow is used for protected inheritance.
  • A dark red arrow is used for private inheritance.
  • A purple dashed arrow is used if a class is contained or used by another class. The arrow is labeled with the variable(s) through which the pointed class or struct is accessible.
  • A yellow dashed arrow denotes a relation between a template instance and the template class it was instantiated from. The arrow is labeled with the template parameters of the instance.
libwnckmm-1.0-0.1.1/doc/reference/html/open.png0000664000175000017500000000017312414127675021054 0ustar00execexec00000000000000‰PNG  IHDR à‘BIDATxíÝÁ €0 Ð׬ՙ\Àº€39—b!©9{|ðI>$#Àß´ý8/¨ÄØzƒ/Ï>2À[ÎgiU,/¬~¼Ï\ Ä9Ù¸IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00022.html0000664000175000017500000000756612414127676021115 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::ActionMenu Member List

This is the complete list of members for Wnck::ActionMenu, including all inherited members.

ActionMenu(const Window* window)Wnck::ActionMenuexplicit
gobj()Wnck::ActionMenuinline
gobj() const Wnck::ActionMenuinline
wrap(WnckActionMenu* object, bool take_copy=false)Wnck::ActionMenurelated
~ActionMenu()Wnck::ActionMenuvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2splitbar.png0000664000175000017500000000047212414127675022537 0ustar00execexec00000000000000‰PNG  IHDRM¸¿IDATxíÝ¡JCa‡ñç(˜ ëƒ%±Ø4 b±È˜Í¶3˜v^Á±˜…ãó–ŽELƒõ…¥•³ ,ÿb;íç{Ã/¼ðÞÀaYÕ¯åóøq:¼º¹›\òIIIIIIIIIIIIIIIIII-Òçl¹›«õ抢è_t/Ï»ã£ÑíYQVõðêäíã÷´×ùY¬Úÿµ§¦ivók¾_íåýÛ£I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$I@$ýC[Vì=ü[„fÆIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2doc.png0000664000175000017500000000135212414127675021462 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆ±IDATxíMOS[…Ÿžsúa?-XZ(PD4‚ AWbu`b 77wäHFÆCËÔÂÿà/`vo„ˆAPòq‹P @ ­ûÝè980 îà¤+»§Ýy×^ïZï9SW¹\83g‰3'°Nâçl¹¸_b¯p ïåûÆVÜÖ¡€Ÿ×"¬Ö†X€d]Ðà3“ÉÃÄÌ™xŸ ßMàœ[<çSPkvc—hÈ'…™˜^Åm™hØ7 `Û™¦ èÀåráq›‘œ¾!daeKŸþÆÕ˜:Ì*³_דâèi?I–eP*B7Ÿ¿åô!¹Ýgr6Ër6oKbëþãðôrI”ËTˆüªŒ¨xóö=›ù¢&‰(e+ßóÄkýÇ`ëÁÜb.“¸ÐW×w0¥°jÑzN™¬|©WEãµ¢a¯6[öX†AkÓù*/œ¨‰€ÉY­ ÿV’§–u²jÂ>1W *½·°PGŽzÿ¨/Eg{ ŸÇâaoŠÁVú:è¿™¤1$ôR§W,–ªà¨@ŠË56¾ÀÔÜ-¾,mê¸Î/æè¹– òr5¥T*S(Vf8ö9u’ Õ£w›ùóa=Í<{Ò¡UŒ÷r¯+ÉådDÏF$è°…£é¿`zþ»ÎúöN‘µÜ®0Q3£~_^Ëóâ¯N=ˆvpTà±LžT}ˆîkq†Òm<¼ÎÓ?Zh¿X£ï_þÝ¥[)ƒ `gêÃa_Ô*äÔ2`'=õ´Fÿ2EâÁPú ÷»›l=8‹Wv°%THqÉ¿<"¤ïG¾ÆxH{#ÆÖ«aÔJÕÞ‡—m‹„ çñKsÿàñVŠØ¡°·MâÒ^ TÁ– Ý›r¥ß½ømüÿ_™?ªWİ÷#uIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2link.png0000664000175000017500000000135212414127675021652 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆ±IDATxíMOS[…Ÿžsúa?-XZ(PD4‚ AWbu`b 77wäHFÆCËÔÂÿà/`vo„ˆAPòq‹P @ ­ûÝè980 îà¤+»§Ýy×^ïZï9SW¹\83g‰3'°Nâçl¹¸_b¯p ïåûÆVÜÖ¡€Ÿ×"¬Ö†X€d]Ðà3“ÉÃÄÌ™xŸ ßMàœ[<çSPkvc—hÈ'…™˜^Åm™hØ7 `Û™¦ èÀåráq›‘œ¾!daeKŸþÆÕ˜:Ì*³_דâèi?I–eP*B7Ÿ¿åô!¹Ýgr6Ër6oKbëþãðôrI”ËTˆüªŒ¨xóö=›ù¢&‰(e+ßóÄkýÇ`ëÁÜb.“¸ÐW×w0¥°jÑzN™¬|©WEãµ¢a¯6[öX†AkÓù*/œ¨‰€ÉY­ ÿV’§–u²jÂ>1W *½·°PGŽzÿ¨/Eg{ ŸÇâaoŠÁVú:è¿™¤1$ôR§W,–ªà¨@ŠË56¾ÀÔÜ-¾,mê¸Î/æè¹– òr5¥T*S(Vf8ö9u’ Õ£w›ùóa=Í<{Ò¡UŒ÷r¯+ÉådDÏF$è°…£é¿`zþ»ÎúöN‘µÜ®0Q3£~_^Ëóâ¯N=ˆvpTà±LžT}ˆîkq†Òm<¼ÎÓ?Zh¿X£ï_þÝ¥[)ƒ `gêÃa_Ô*äÔ2`'=õ´Fÿ2EâÁPú ÷»›l=8‹Wv°%THqÉ¿<"¤ïG¾ÆxH{#ÆÖ«aÔJÕÞ‡—m‹„ çñKsÿàñVŠØ¡°·MâÒ^ TÁ– Ý›r¥ß½ømüÿ_™?ªWİ÷#uIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00021.html0000664000175000017500000016635112414127676021112 0ustar00execexec00000000000000 wnckmm: wnckmm Enums and Flags
wnckmm Enums and Flags

Enumerations

enum  Wnck::PagerDisplayMode {
  Wnck::PAGER_DISPLAY_NAME,
  Wnck::PAGER_DISPLAY_CONTENT
}
 
enum  Wnck::WindowType {
  Wnck::WINDOW_NORMAL,
  Wnck::WINDOW_DESKTOP,
  Wnck::WINDOW_DOCK,
  Wnck::WINDOW_DIALOG,
  Wnck::WINDOW_TOOLBAR,
  Wnck::WINDOW_MENU,
  Wnck::WINDOW_UTILITY,
  Wnck::WINDOW_SPLASHSCREEN
}
 
enum  Wnck::WindowState {
  Wnck::WINDOW_STATE_MINIMIZED = 1 << 0,
  Wnck::WINDOW_STATE_MAXIMIZED_HORIZONTALLY = 1 << 1,
  Wnck::WINDOW_STATE_MAXIMIZED_VERTICALLY = 1 << 2,
  Wnck::WINDOW_STATE_SHADED = 1 << 3,
  Wnck::WINDOW_STATE_SKIP_PAGER = 1 << 4,
  Wnck::WINDOW_STATE_SKIP_TASKLIST = 1 << 5,
  Wnck::WINDOW_STATE_STICKY = 1 << 6,
  Wnck::WINDOW_STATE_HIDDEN = 1 << 7,
  Wnck::WINDOW_STATE_FULLSCREEN = 1 << 8,
  Wnck::WINDOW_STATE_DEMANDS_ATTENTION = 1 << 9,
  Wnck::WINDOW_STATE_URGENT = 1 << 10,
  Wnck::WINDOW_STATE_ABOVE = 1 << 11,
  Wnck::WINDOW_STATE_BELOW = 1 << 12
}
 
enum  Wnck::WindowActions {
  Wnck::WINDOW_ACTION_MOVE = 1 << 0,
  Wnck::WINDOW_ACTION_RESIZE = 1 << 1,
  Wnck::WINDOW_ACTION_SHADE = 1 << 2,
  Wnck::WINDOW_ACTION_STICK = 1 << 3,
  Wnck::WINDOW_ACTION_MAXIMIZE_HORIZONTALLY = 1 << 4,
  Wnck::WINDOW_ACTION_MAXIMIZE_VERTICALLY = 1 << 5,
  Wnck::WINDOW_ACTION_CHANGE_WORKSPACE = 1 << 6,
  Wnck::WINDOW_ACTION_CLOSE = 1 << 7,
  Wnck::WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY = 1 << 8,
  Wnck::WINDOW_ACTION_UNMAXIMIZE_VERTICALLY = 1 << 9,
  Wnck::WINDOW_ACTION_UNSHADE = 1 << 10,
  Wnck::WINDOW_ACTION_UNSTICK = 1 << 11,
  Wnck::WINDOW_ACTION_MINIMIZE = 1 << 12,
  Wnck::WINDOW_ACTION_UNMINIMIZE = 1 << 13,
  Wnck::WINDOW_ACTION_MAXIMIZE = 1 << 14,
  Wnck::WINDOW_ACTION_UNMAXIMIZE = 1 << 15,
  Wnck::WINDOW_ACTION_FULLSCREEN = 1 << 16,
  Wnck::WINDOW_ACTION_ABOVE = 1 << 17,
  Wnck::WINDOW_ACTION_BELOW = 1 << 18
}
 
enum  Wnck::WindowGravity {
  Wnck::WINDOW_GRAVITY_CURRENT,
  Wnck::WINDOW_GRAVITY_NORTHWEST,
  Wnck::WINDOW_GRAVITY_NORTH,
  Wnck::WINDOW_GRAVITY_NORTHEAST,
  Wnck::WINDOW_GRAVITY_WEST,
  Wnck::WINDOW_GRAVITY_CENTER,
  Wnck::WINDOW_GRAVITY_EAST,
  Wnck::WINDOW_GRAVITY_SOUTHWEST,
  Wnck::WINDOW_GRAVITY_SOUTH,
  Wnck::WINDOW_GRAVITY_SOUTHEAST,
  Wnck::WINDOW_GRAVITY_STATIC
}
 
enum  Wnck::WindowMoveResizeMask {
  Wnck::WINDOW_CHANGE_X = 1 << 0,
  Wnck::WINDOW_CHANGE_Y = 1 << 1,
  Wnck::WINDOW_CHANGE_WIDTH = 1 << 2,
  Wnck::WINDOW_CHANGE_HEIGHT = 1 << 3
}
 
enum  Wnck::MotionDirection {
  Wnck::MOTION_UP = -1,
  Wnck::MOTION_DOWN = -2,
  Wnck::MOTION_LEFT = -3,
  Wnck::MOTION_RIGHT = -4
}
 

Functions

WindowState Wnck::operator| (WindowState lhs, WindowState rhs)
 
WindowState Wnck::operator& (WindowState lhs, WindowState rhs)
 
WindowState Wnck::operator^ (WindowState lhs, WindowState rhs)
 
WindowState Wnck::operator~ (WindowState flags)
 
WindowState& Wnck::operator|= (WindowState& lhs, WindowState rhs)
 
WindowState& Wnck::operator&= (WindowState& lhs, WindowState rhs)
 
WindowState& Wnck::operator^= (WindowState& lhs, WindowState rhs)
 
WindowActions Wnck::operator| (WindowActions lhs, WindowActions rhs)
 
WindowActions Wnck::operator& (WindowActions lhs, WindowActions rhs)
 
WindowActions Wnck::operator^ (WindowActions lhs, WindowActions rhs)
 
WindowActions Wnck::operator~ (WindowActions flags)
 
WindowActions& Wnck::operator|= (WindowActions& lhs, WindowActions rhs)
 
WindowActions& Wnck::operator&= (WindowActions& lhs, WindowActions rhs)
 
WindowActions& Wnck::operator^= (WindowActions& lhs, WindowActions rhs)
 
WindowMoveResizeMask Wnck::operator| (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask Wnck::operator& (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask Wnck::operator^ (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask Wnck::operator~ (WindowMoveResizeMask flags)
 
WindowMoveResizeMask& Wnck::operator|= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask& Wnck::operator&= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask& Wnck::operator^= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 

Detailed Description

Enumeration Type Documentation

Enumerator
MOTION_UP 
MOTION_DOWN 
MOTION_LEFT 
MOTION_RIGHT 
Enumerator
PAGER_DISPLAY_NAME 
PAGER_DISPLAY_CONTENT 
Bitwise operators:
WindowActions operator|(WindowActions, WindowActions)
WindowActions operator&(WindowActions, WindowActions)
WindowActions operator^(WindowActions, WindowActions)
WindowActions operator~(WindowActions)
WindowActions& operator|=(WindowActions&, WindowActions)
WindowActions& operator&=(WindowActions&, WindowActions)
WindowActions& operator^=(WindowActions&, WindowActions)
Enumerator
WINDOW_ACTION_MOVE 
WINDOW_ACTION_RESIZE 
WINDOW_ACTION_SHADE 
WINDOW_ACTION_STICK 
WINDOW_ACTION_MAXIMIZE_HORIZONTALLY 
WINDOW_ACTION_MAXIMIZE_VERTICALLY 
WINDOW_ACTION_CHANGE_WORKSPACE 
WINDOW_ACTION_CLOSE 
WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY 
WINDOW_ACTION_UNMAXIMIZE_VERTICALLY 
WINDOW_ACTION_UNSHADE 
WINDOW_ACTION_UNSTICK 
WINDOW_ACTION_MINIMIZE 
WINDOW_ACTION_UNMINIMIZE 
WINDOW_ACTION_MAXIMIZE 
WINDOW_ACTION_UNMAXIMIZE 
WINDOW_ACTION_FULLSCREEN 
WINDOW_ACTION_ABOVE 
WINDOW_ACTION_BELOW 
Enumerator
WINDOW_GRAVITY_CURRENT 
WINDOW_GRAVITY_NORTHWEST 
WINDOW_GRAVITY_NORTH 
WINDOW_GRAVITY_NORTHEAST 
WINDOW_GRAVITY_WEST 
WINDOW_GRAVITY_CENTER 
WINDOW_GRAVITY_EAST 
WINDOW_GRAVITY_SOUTHWEST 
WINDOW_GRAVITY_SOUTH 
WINDOW_GRAVITY_SOUTHEAST 
WINDOW_GRAVITY_STATIC 
Bitwise operators:
WindowMoveResizeMask operator|(WindowMoveResizeMask, WindowMoveResizeMask)
WindowMoveResizeMask operator&(WindowMoveResizeMask, WindowMoveResizeMask)
WindowMoveResizeMask operator^(WindowMoveResizeMask, WindowMoveResizeMask)
WindowMoveResizeMask operator~(WindowMoveResizeMask)
WindowMoveResizeMask& operator|=(WindowMoveResizeMask&, WindowMoveResizeMask)
WindowMoveResizeMask& operator&=(WindowMoveResizeMask&, WindowMoveResizeMask)
WindowMoveResizeMask& operator^=(WindowMoveResizeMask&, WindowMoveResizeMask)
Enumerator
WINDOW_CHANGE_X 
WINDOW_CHANGE_Y 
WINDOW_CHANGE_WIDTH 
WINDOW_CHANGE_HEIGHT 
Bitwise operators:
WindowState operator|(WindowState, WindowState)
WindowState operator&(WindowState, WindowState)
WindowState operator^(WindowState, WindowState)
WindowState operator~(WindowState)
WindowState& operator|=(WindowState&, WindowState)
WindowState& operator&=(WindowState&, WindowState)
WindowState& operator^=(WindowState&, WindowState)
Enumerator
WINDOW_STATE_MINIMIZED 
WINDOW_STATE_MAXIMIZED_HORIZONTALLY 
WINDOW_STATE_MAXIMIZED_VERTICALLY 
WINDOW_STATE_SHADED 
WINDOW_STATE_SKIP_PAGER 
WINDOW_STATE_SKIP_TASKLIST 
WINDOW_STATE_STICKY 
WINDOW_STATE_HIDDEN 
WINDOW_STATE_FULLSCREEN 
WINDOW_STATE_DEMANDS_ATTENTION 
WINDOW_STATE_URGENT 
WINDOW_STATE_ABOVE 
WINDOW_STATE_BELOW 
Enumerator
WINDOW_NORMAL 
WINDOW_DESKTOP 
WINDOW_DOCK 
WINDOW_DIALOG 
WINDOW_TOOLBAR 
WINDOW_MENU 
WINDOW_UTILITY 
WINDOW_SPLASHSCREEN 

Function Documentation

WindowState Wnck::operator& ( WindowState  lhs,
WindowState  rhs 
)
inline
WindowActions Wnck::operator& ( WindowActions  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask Wnck::operator& ( WindowMoveResizeMask  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState& Wnck::operator&= ( WindowState &  lhs,
WindowState  rhs 
)
inline
WindowActions& Wnck::operator&= ( WindowActions &  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask& Wnck::operator&= ( WindowMoveResizeMask &  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState Wnck::operator^ ( WindowState  lhs,
WindowState  rhs 
)
inline
WindowActions Wnck::operator^ ( WindowActions  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask Wnck::operator^ ( WindowMoveResizeMask  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState& Wnck::operator^= ( WindowState &  lhs,
WindowState  rhs 
)
inline
WindowActions& Wnck::operator^= ( WindowActions &  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask& Wnck::operator^= ( WindowMoveResizeMask &  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState Wnck::operator| ( WindowState  lhs,
WindowState  rhs 
)
inline
WindowActions Wnck::operator| ( WindowActions  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask Wnck::operator| ( WindowMoveResizeMask  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState& Wnck::operator|= ( WindowState &  lhs,
WindowState  rhs 
)
inline
WindowActions& Wnck::operator|= ( WindowActions &  lhs,
WindowActions  rhs 
)
inline
WindowMoveResizeMask& Wnck::operator|= ( WindowMoveResizeMask &  lhs,
WindowMoveResizeMask  rhs 
)
inline
WindowState Wnck::operator~ ( WindowState  flags)
inline
WindowActions Wnck::operator~ ( WindowActions  flags)
inline
WindowMoveResizeMask Wnck::operator~ ( WindowMoveResizeMask  flags)
inline
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_p.html0000664000175000017500000000740412414127676023642 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- p -

libwnckmm-1.0-0.1.1/doc/reference/html/dir_3cb18b12474da0fbae7f60e8a2ccdbfa.html0000664000175000017500000000525012414127676026130 0ustar00execexec00000000000000 wnckmm: /home/exec/code/my/checkouts/libwnckmm/wnck Directory Reference
wnck Directory Reference

Directories

directory  wnckmm
 
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_s.html0000664000175000017500000002051412414127676023642 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- s -

libwnckmm-1.0-0.1.1/doc/reference/html/namespacemembers_func.html0000664000175000017500000000610212414127676024614 0ustar00execexec00000000000000 wnckmm: Namespace Members
 
libwnckmm-1.0-0.1.1/doc/reference/html/doxygen.css0000664000175000017500000005657712414127675021617 0ustar00execexec00000000000000/* The standard CSS for doxygen 1.8.6 */ body, table, div, p, dl { font: 400 14px/22px Roboto,sans-serif; } /* @group Heading Levels */ h1.groupheader { font-size: 150%; } .title { font: 400 14px/28px Roboto,sans-serif; font-size: 150%; font-weight: bold; margin: 10px 2px; } h2.groupheader { border-bottom: 1px solid #879ECB; color: #354C7B; font-size: 150%; font-weight: normal; margin-top: 1.75em; padding-top: 8px; padding-bottom: 4px; width: 100%; } h3.groupheader { font-size: 100%; } h1, h2, h3, h4, h5, h6 { -webkit-transition: text-shadow 0.5s linear; -moz-transition: text-shadow 0.5s linear; -ms-transition: text-shadow 0.5s linear; -o-transition: text-shadow 0.5s linear; transition: text-shadow 0.5s linear; margin-right: 15px; } h1.glow, h2.glow, h3.glow, h4.glow, h5.glow, h6.glow { text-shadow: 0 0 15px cyan; } dt { font-weight: bold; } div.multicol { -moz-column-gap: 1em; -webkit-column-gap: 1em; -moz-column-count: 3; -webkit-column-count: 3; } p.startli, p.startdd { margin-top: 2px; } p.starttd { margin-top: 0px; } p.endli { margin-bottom: 0px; } p.enddd { margin-bottom: 4px; } p.endtd { margin-bottom: 2px; } /* @end */ caption { font-weight: bold; } span.legend { font-size: 70%; text-align: center; } h3.version { font-size: 90%; text-align: center; } div.qindex, div.navtab{ background-color: #EBEFF6; border: 1px solid #A3B4D7; text-align: center; } div.qindex, div.navpath { width: 100%; line-height: 140%; } div.navtab { margin-right: 15px; } /* @group Link Styling */ a { color: #3D578C; font-weight: normal; text-decoration: none; } .contents a:visited { color: #4665A2; } a:hover { text-decoration: underline; } a.qindex { font-weight: bold; } a.qindexHL { font-weight: bold; background-color: #9CAFD4; color: #ffffff; border: 1px double #869DCA; } .contents a.qindexHL:visited { color: #ffffff; } a.el { font-weight: bold; } a.elRef { } a.code, a.code:visited, a.line, a.line:visited { color: #4665A2; } a.codeRef, a.codeRef:visited, a.lineRef, a.lineRef:visited { color: #4665A2; } /* @end */ dl.el { margin-left: -1cm; } pre.fragment { border: 1px solid #C4CFE5; background-color: #FBFCFD; padding: 4px 6px; margin: 4px 8px 4px 2px; overflow: auto; word-wrap: break-word; font-size: 9pt; line-height: 125%; font-family: monospace, fixed; font-size: 105%; } div.fragment { padding: 4px 6px; margin: 4px 8px 4px 2px; background-color: #FBFCFD; border: 1px solid #C4CFE5; } div.line { font-family: monospace, fixed; font-size: 13px; min-height: 13px; line-height: 1.0; text-wrap: unrestricted; white-space: -moz-pre-wrap; /* Moz */ white-space: -pre-wrap; /* Opera 4-6 */ white-space: -o-pre-wrap; /* Opera 7 */ white-space: pre-wrap; /* CSS3 */ word-wrap: break-word; /* IE 5.5+ */ text-indent: -53px; padding-left: 53px; padding-bottom: 0px; margin: 0px; -webkit-transition-property: background-color, box-shadow; -webkit-transition-duration: 0.5s; -moz-transition-property: background-color, box-shadow; -moz-transition-duration: 0.5s; -ms-transition-property: background-color, box-shadow; -ms-transition-duration: 0.5s; -o-transition-property: background-color, box-shadow; -o-transition-duration: 0.5s; transition-property: background-color, box-shadow; transition-duration: 0.5s; } div.line.glow { background-color: cyan; box-shadow: 0 0 10px cyan; } span.lineno { padding-right: 4px; text-align: right; border-right: 2px solid #0F0; background-color: #E8E8E8; white-space: pre; } span.lineno a { background-color: #D8D8D8; } span.lineno a:hover { background-color: #C8C8C8; } div.ah { background-color: black; font-weight: bold; color: #ffffff; margin-bottom: 3px; margin-top: 3px; padding: 0.2em; border: solid thin #333; border-radius: 0.5em; -webkit-border-radius: .5em; -moz-border-radius: .5em; box-shadow: 2px 2px 3px #999; -webkit-box-shadow: 2px 2px 3px #999; -moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px; background-image: -webkit-gradient(linear, left top, left bottom, from(#eee), to(#000),color-stop(0.3, #444)); background-image: -moz-linear-gradient(center top, #eee 0%, #444 40%, #000); } div.groupHeader { margin-left: 16px; margin-top: 12px; font-weight: bold; } div.groupText { margin-left: 16px; font-style: italic; } body { background-color: white; color: black; margin: 0; } div.contents { margin-top: 10px; margin-left: 12px; margin-right: 8px; } td.indexkey { background-color: #EBEFF6; font-weight: bold; border: 1px solid #C4CFE5; margin: 2px 0px 2px 0; padding: 2px 10px; white-space: nowrap; vertical-align: top; } td.indexvalue { background-color: #EBEFF6; border: 1px solid #C4CFE5; padding: 2px 10px; margin: 2px 0px; } tr.memlist { background-color: #EEF1F7; } p.formulaDsp { text-align: center; } img.formulaDsp { } img.formulaInl { vertical-align: middle; } div.center { text-align: center; margin-top: 0px; margin-bottom: 0px; padding: 0px; } div.center img { border: 0px; } address.footer { text-align: right; padding-right: 12px; } img.footer { border: 0px; vertical-align: middle; } /* @group Code Colorization */ span.keyword { color: #008000 } span.keywordtype { color: #604020 } span.keywordflow { color: #e08000 } span.comment { color: #800000 } span.preprocessor { color: #806020 } span.stringliteral { color: #002080 } span.charliteral { color: #008080 } span.vhdldigit { color: #ff00ff } span.vhdlchar { color: #000000 } span.vhdlkeyword { color: #700070 } span.vhdllogic { color: #ff0000 } blockquote { background-color: #F7F8FB; border-left: 2px solid #9CAFD4; margin: 0 24px 0 4px; padding: 0 12px 0 16px; } /* @end */ /* .search { color: #003399; font-weight: bold; } form.search { margin-bottom: 0px; margin-top: 0px; } input.search { font-size: 75%; color: #000080; font-weight: normal; background-color: #e8eef2; } */ td.tiny { font-size: 75%; } .dirtab { padding: 4px; border-collapse: collapse; border: 1px solid #A3B4D7; } th.dirtab { background: #EBEFF6; font-weight: bold; } hr { height: 0px; border: none; border-top: 1px solid #4A6AAA; } hr.footer { height: 1px; } /* @group Member Descriptions */ table.memberdecls { border-spacing: 0px; padding: 0px; } .memberdecls td, .fieldtable tr { -webkit-transition-property: background-color, box-shadow; -webkit-transition-duration: 0.5s; -moz-transition-property: background-color, box-shadow; -moz-transition-duration: 0.5s; -ms-transition-property: background-color, box-shadow; -ms-transition-duration: 0.5s; -o-transition-property: background-color, box-shadow; -o-transition-duration: 0.5s; transition-property: background-color, box-shadow; transition-duration: 0.5s; } .memberdecls td.glow, .fieldtable tr.glow { background-color: cyan; box-shadow: 0 0 15px cyan; } .mdescLeft, .mdescRight, .memItemLeft, .memItemRight, .memTemplItemLeft, .memTemplItemRight, .memTemplParams { background-color: #F9FAFC; border: none; margin: 4px; padding: 1px 0 0 8px; } .mdescLeft, .mdescRight { padding: 0px 8px 4px 8px; color: #555; } .memSeparator { border-bottom: 1px solid #DEE4F0; line-height: 1px; margin: 0px; padding: 0px; } .memItemLeft, .memTemplItemLeft { white-space: nowrap; } .memItemRight { width: 100%; } .memTemplParams { color: #4665A2; white-space: nowrap; font-size: 80%; } /* @end */ /* @group Member Details */ /* Styles for detailed member documentation */ .memtemplate { font-size: 80%; color: #4665A2; font-weight: normal; margin-left: 9px; } .memnav { background-color: #EBEFF6; border: 1px solid #A3B4D7; text-align: center; margin: 2px; margin-right: 15px; padding: 2px; } .mempage { width: 100%; } .memitem { padding: 0; margin-bottom: 10px; margin-right: 5px; -webkit-transition: box-shadow 0.5s linear; -moz-transition: box-shadow 0.5s linear; -ms-transition: box-shadow 0.5s linear; -o-transition: box-shadow 0.5s linear; transition: box-shadow 0.5s linear; display: table !important; width: 100%; } .memitem.glow { box-shadow: 0 0 15px cyan; } .memname { font-weight: bold; margin-left: 6px; } .memname td { vertical-align: bottom; } .memproto, dl.reflist dt { border-top: 1px solid #A8B8D9; border-left: 1px solid #A8B8D9; border-right: 1px solid #A8B8D9; padding: 6px 0px 6px 0px; color: #253555; font-weight: bold; text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); background-image:url('nav_f.png'); background-repeat:repeat-x; background-color: #E2E8F2; /* opera specific markup */ box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); border-top-right-radius: 4px; border-top-left-radius: 4px; /* firefox specific markup */ -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; -moz-border-radius-topright: 4px; -moz-border-radius-topleft: 4px; /* webkit specific markup */ -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); -webkit-border-top-right-radius: 4px; -webkit-border-top-left-radius: 4px; } .memdoc, dl.reflist dd { border-bottom: 1px solid #A8B8D9; border-left: 1px solid #A8B8D9; border-right: 1px solid #A8B8D9; padding: 6px 10px 2px 10px; background-color: #FBFCFD; border-top-width: 0; background-image:url('nav_g.png'); background-repeat:repeat-x; background-color: #FFFFFF; /* opera specific markup */ border-bottom-left-radius: 4px; border-bottom-right-radius: 4px; box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); /* firefox specific markup */ -moz-border-radius-bottomleft: 4px; -moz-border-radius-bottomright: 4px; -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; /* webkit specific markup */ -webkit-border-bottom-left-radius: 4px; -webkit-border-bottom-right-radius: 4px; -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); } dl.reflist dt { padding: 5px; } dl.reflist dd { margin: 0px 0px 10px 0px; padding: 5px; } .paramkey { text-align: right; } .paramtype { white-space: nowrap; } .paramname { color: #602020; white-space: nowrap; } .paramname em { font-style: normal; } .paramname code { line-height: 14px; } .params, .retval, .exception, .tparams { margin-left: 0px; padding-left: 0px; } .params .paramname, .retval .paramname { font-weight: bold; vertical-align: top; } .params .paramtype { font-style: italic; vertical-align: top; } .params .paramdir { font-family: "courier new",courier,monospace; vertical-align: top; } table.mlabels { border-spacing: 0px; } td.mlabels-left { width: 100%; padding: 0px; } td.mlabels-right { vertical-align: bottom; padding: 0px; white-space: nowrap; } span.mlabels { margin-left: 8px; } span.mlabel { background-color: #728DC1; border-top:1px solid #5373B4; border-left:1px solid #5373B4; border-right:1px solid #C4CFE5; border-bottom:1px solid #C4CFE5; text-shadow: none; color: white; margin-right: 4px; padding: 2px 3px; border-radius: 3px; font-size: 7pt; white-space: nowrap; vertical-align: middle; } /* @end */ /* these are for tree view when not used as main index */ div.directory { margin: 10px 0px; border-top: 1px solid #A8B8D9; border-bottom: 1px solid #A8B8D9; width: 100%; } .directory table { border-collapse:collapse; } .directory td { margin: 0px; padding: 0px; vertical-align: top; } .directory td.entry { white-space: nowrap; padding-right: 6px; padding-top: 3px; } .directory td.entry a { outline:none; } .directory td.entry a img { border: none; } .directory td.desc { width: 100%; padding-left: 6px; padding-right: 6px; padding-top: 3px; border-left: 1px solid rgba(0,0,0,0.05); } .directory tr.even { padding-left: 6px; background-color: #F7F8FB; } .directory img { vertical-align: -30%; } .directory .levels { white-space: nowrap; width: 100%; text-align: right; font-size: 9pt; } .directory .levels span { cursor: pointer; padding-left: 2px; padding-right: 2px; color: #3D578C; } div.dynheader { margin-top: 8px; -webkit-touch-callout: none; -webkit-user-select: none; -khtml-user-select: none; -moz-user-select: none; -ms-user-select: none; user-select: none; } address { font-style: normal; color: #2A3D61; } table.doxtable { border-collapse:collapse; margin-top: 4px; margin-bottom: 4px; } table.doxtable td, table.doxtable th { border: 1px solid #2D4068; padding: 3px 7px 2px; } table.doxtable th { background-color: #374F7F; color: #FFFFFF; font-size: 110%; padding-bottom: 4px; padding-top: 5px; } table.fieldtable { /*width: 100%;*/ margin-bottom: 10px; border: 1px solid #A8B8D9; border-spacing: 0px; -moz-border-radius: 4px; -webkit-border-radius: 4px; border-radius: 4px; -moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px; -webkit-box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15); box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15); } .fieldtable td, .fieldtable th { padding: 3px 7px 2px; } .fieldtable td.fieldtype, .fieldtable td.fieldname { white-space: nowrap; border-right: 1px solid #A8B8D9; border-bottom: 1px solid #A8B8D9; vertical-align: top; } .fieldtable td.fieldname { padding-top: 3px; } .fieldtable td.fielddoc { border-bottom: 1px solid #A8B8D9; /*width: 100%;*/ } .fieldtable td.fielddoc p:first-child { margin-top: 0px; } .fieldtable td.fielddoc p:last-child { margin-bottom: 2px; } .fieldtable tr:last-child td { border-bottom: none; } .fieldtable th { background-image:url('nav_f.png'); background-repeat:repeat-x; background-color: #E2E8F2; font-size: 90%; color: #253555; padding-bottom: 4px; padding-top: 5px; text-align:left; -moz-border-radius-topleft: 4px; -moz-border-radius-topright: 4px; -webkit-border-top-left-radius: 4px; -webkit-border-top-right-radius: 4px; border-top-left-radius: 4px; border-top-right-radius: 4px; border-bottom: 1px solid #A8B8D9; } .tabsearch { top: 0px; left: 10px; height: 36px; background-image: url('tab_b.png'); z-index: 101; overflow: hidden; font-size: 13px; } .navpath ul { font-size: 11px; background-image:url('tab_b.png'); background-repeat:repeat-x; background-position: 0 -5px; height:30px; line-height:30px; color:#8AA0CC; border:solid 1px #C2CDE4; overflow:hidden; margin:0px; padding:0px; } .navpath li { list-style-type:none; float:left; padding-left:10px; padding-right:15px; background-image:url('bc_s.png'); background-repeat:no-repeat; background-position:right; color:#364D7C; } .navpath li.navelem a { height:32px; display:block; text-decoration: none; outline: none; color: #283A5D; font-family: 'Lucida Grande',Geneva,Helvetica,Arial,sans-serif; text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); text-decoration: none; } .navpath li.navelem a:hover { color:#6884BD; } .navpath li.footer { list-style-type:none; float:right; padding-left:10px; padding-right:15px; background-image:none; background-repeat:no-repeat; background-position:right; color:#364D7C; font-size: 8pt; } div.summary { float: right; font-size: 8pt; padding-right: 5px; width: 50%; text-align: right; } div.summary a { white-space: nowrap; } div.ingroups { font-size: 8pt; width: 50%; text-align: left; } div.ingroups a { white-space: nowrap; } div.header { background-image:url('nav_h.png'); background-repeat:repeat-x; background-color: #F9FAFC; margin: 0px; border-bottom: 1px solid #C4CFE5; } div.headertitle { padding: 5px 5px 5px 10px; } dl { padding: 0 0 0 10px; } /* dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug */ dl.section { margin-left: 0px; padding-left: 0px; } dl.note { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #D0C000; } dl.warning, dl.attention { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #FF0000; } dl.pre, dl.post, dl.invariant { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #00D000; } dl.deprecated { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #505050; } dl.todo { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #00C0E0; } dl.test { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #3030E0; } dl.bug { margin-left:-7px; padding-left: 3px; border-left:4px solid; border-color: #C08050; } dl.section dd { margin-bottom: 6px; } #projectlogo { text-align: center; vertical-align: bottom; border-collapse: separate; } #projectlogo img { border: 0px none; } #projectname { font: 300% Tahoma, Arial,sans-serif; margin: 0px; padding: 2px 0px; } #projectbrief { font: 120% Tahoma, Arial,sans-serif; margin: 0px; padding: 0px; } #projectnumber { font: 50% Tahoma, Arial,sans-serif; margin: 0px; padding: 0px; } #titlearea { padding: 0px; margin: 0px; width: 100%; border-bottom: 1px solid #5373B4; } .image { text-align: center; } .dotgraph { text-align: center; } .mscgraph { text-align: center; } .diagraph { text-align: center; } .caption { font-weight: bold; } div.zoom { border: 1px solid #90A5CE; } dl.citelist { margin-bottom:50px; } dl.citelist dt { color:#334975; float:left; font-weight:bold; margin-right:10px; padding:5px; } dl.citelist dd { margin:2px 0; padding:5px 0; } div.toc { padding: 14px 25px; background-color: #F4F6FA; border: 1px solid #D8DFEE; border-radius: 7px 7px 7px 7px; float: right; height: auto; margin: 0 20px 10px 10px; width: 200px; } div.toc li { background: url("bdwn.png") no-repeat scroll 0 5px transparent; font: 10px/1.2 Verdana,DejaVu Sans,Geneva,sans-serif; margin-top: 5px; padding-left: 10px; padding-top: 2px; } div.toc h3 { font: bold 12px/1.2 Arial,FreeSans,sans-serif; color: #4665A2; border-bottom: 0 none; margin: 0; } div.toc ul { list-style: none outside none; border: medium none; padding: 0px; } div.toc li.level1 { margin-left: 0px; } div.toc li.level2 { margin-left: 15px; } div.toc li.level3 { margin-left: 30px; } div.toc li.level4 { margin-left: 45px; } .inherit_header { font-weight: bold; color: gray; cursor: pointer; -webkit-touch-callout: none; -webkit-user-select: none; -khtml-user-select: none; -moz-user-select: none; -ms-user-select: none; user-select: none; } .inherit_header td { padding: 6px 0px 2px 5px; } .inherit { display: none; } tr.heading h2 { margin-top: 12px; margin-bottom: 4px; } /* tooltip related style info */ .ttc { position: absolute; display: none; } #powerTip { cursor: default; white-space: nowrap; background-color: white; border: 1px solid gray; border-radius: 4px 4px 4px 4px; box-shadow: 1px 1px 7px gray; display: none; font-size: smaller; max-width: 80%; opacity: 0.9; padding: 1ex 1em 1em; position: absolute; z-index: 2147483647; } #powerTip div.ttdoc { color: grey; font-style: italic; } #powerTip div.ttname a { font-weight: bold; } #powerTip div.ttname { font-weight: bold; } #powerTip div.ttdeci { color: #006318; } #powerTip div { margin: 0px; padding: 0px; font: 12px/16px Roboto,sans-serif; } #powerTip:before, #powerTip:after { content: ""; position: absolute; margin: 0px; } #powerTip.n:after, #powerTip.n:before, #powerTip.s:after, #powerTip.s:before, #powerTip.w:after, #powerTip.w:before, #powerTip.e:after, #powerTip.e:before, #powerTip.ne:after, #powerTip.ne:before, #powerTip.se:after, #powerTip.se:before, #powerTip.nw:after, #powerTip.nw:before, #powerTip.sw:after, #powerTip.sw:before { border: solid transparent; content: " "; height: 0; width: 0; position: absolute; } #powerTip.n:after, #powerTip.s:after, #powerTip.w:after, #powerTip.e:after, #powerTip.nw:after, #powerTip.ne:after, #powerTip.sw:after, #powerTip.se:after { border-color: rgba(255, 255, 255, 0); } #powerTip.n:before, #powerTip.s:before, #powerTip.w:before, #powerTip.e:before, #powerTip.nw:before, #powerTip.ne:before, #powerTip.sw:before, #powerTip.se:before { border-color: rgba(128, 128, 128, 0); } #powerTip.n:after, #powerTip.n:before, #powerTip.ne:after, #powerTip.ne:before, #powerTip.nw:after, #powerTip.nw:before { top: 100%; } #powerTip.n:after, #powerTip.ne:after, #powerTip.nw:after { border-top-color: #ffffff; border-width: 10px; margin: 0px -10px; } #powerTip.n:before { border-top-color: #808080; border-width: 11px; margin: 0px -11px; } #powerTip.n:after, #powerTip.n:before { left: 50%; } #powerTip.nw:after, #powerTip.nw:before { right: 14px; } #powerTip.ne:after, #powerTip.ne:before { left: 14px; } #powerTip.s:after, #powerTip.s:before, #powerTip.se:after, #powerTip.se:before, #powerTip.sw:after, #powerTip.sw:before { bottom: 100%; } #powerTip.s:after, #powerTip.se:after, #powerTip.sw:after { border-bottom-color: #ffffff; border-width: 10px; margin: 0px -10px; } #powerTip.s:before, #powerTip.se:before, #powerTip.sw:before { border-bottom-color: #808080; border-width: 11px; margin: 0px -11px; } #powerTip.s:after, #powerTip.s:before { left: 50%; } #powerTip.sw:after, #powerTip.sw:before { right: 14px; } #powerTip.se:after, #powerTip.se:before { left: 14px; } #powerTip.e:after, #powerTip.e:before { left: 100%; } #powerTip.e:after { border-left-color: #ffffff; border-width: 10px; top: 50%; margin-top: -10px; } #powerTip.e:before { border-left-color: #808080; border-width: 11px; top: 50%; margin-top: -11px; } #powerTip.w:after, #powerTip.w:before { right: 100%; } #powerTip.w:after { border-right-color: #ffffff; border-width: 10px; top: 50%; margin-top: -10px; } #powerTip.w:before { border-right-color: #808080; border-width: 11px; top: 50%; margin-top: -11px; } @media print { #top { display: none; } #side-nav { display: none; } #nav-path { display: none; } body { overflow:visible; } h1, h2, h3, h4, h5, h6 { page-break-after: avoid; } .summary { display: none; } .memitem { page-break-inside: avoid; } #doc-content { margin-left:0 !important; height:auto !important; width:auto !important; overflow:inherit; display:inline; } } libwnckmm-1.0-0.1.1/doc/reference/html/dir_ef7ec48b6be1a419d2e2d765e5d052c0.html0000664000175000017500000000473412414127676025660 0ustar00execexec00000000000000 wnckmm: /home/exec/code/my/checkouts Directory Reference
checkouts Directory Reference

Directories

directory  libwnckmm
 
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2mlastnode.png0000664000175000017500000000036612414127675022707 0ustar00execexec00000000000000‰PNG  IHDRɪ|½IDATxíÝ!NAÅñ¤‡à\ ÷à Um@`Ô5iÒ`ëh ‚ÅW7] b§ÝˆŠ&oföÍd¾YÔ4 üšcø ‡€´‹Åòù3v=¼]†§µ\B… I¿‹=B·™B¡®;¸k´µ W°ÍN@vyÍÑÖ4ãß÷]ÈâYìã§|M}]ÔÚx6a }ôdׇØYüú¨>¤||5?Ó>|žB"¡î'¡IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_m.html0000664000175000017500000001070612414127676022623 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- m -

libwnckmm-1.0-0.1.1/doc/reference/html/functions.html0000664000175000017500000001014112414127676022300 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- a -

libwnckmm-1.0-0.1.1/doc/reference/html/tab_s.png0000664000175000017500000000027012414127675021201 0ustar00execexec00000000000000‰PNG  IHDR$ÇÇ[IDATxíÝ ‚@@Ñ£?Q…¤"š¢%¦I‘—Šf–6[´HÃäQƒ<Þâõþ]ždr Í’s?ˆO=Ñññw'ÌF‡Ž íðö-~rÃ[œèŠ­ì¬mƒÖ¬ƒݯнŠÕF)Yº% §`nÌ,9B ™’©!ÑŒ\ý<Å#üîî•IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_f.html0000664000175000017500000000726312414127676022620 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- f -

libwnckmm-1.0-0.1.1/doc/reference/html/closed.png0000664000175000017500000000020412414127675021357 0ustar00execexec00000000000000‰PNG  IHDR à‘KIDATxíÝm @!†ÑGk™É7À-`&séts¦Àñþòð@åk}ª2€… P%Á_Ëþ¿N² .:0Dk¥‹Â›x" Ö›)¡xÒ5õIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00029.html0000664000175000017500000006153112414127676021114 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Window Member List

This is the complete list of members for Wnck::Window, including all inherited members.

activate(guint32 timestamp)Wnck::Window
activate_transient(guint32 timestamp)Wnck::Window
close(guint32 timestamp)Wnck::Window
get_actions() const Wnck::Window
get_application() const Wnck::Window
get_class_group() const Wnck::Window
get_client_geometry() const Wnck::Window
get_for_xid(gulong xid)Wnck::Windowstatic
get_geometry() const Wnck::Window
get_group_leader() const Wnck::Window
get_icon() const Wnck::Window
get_icon_name() const Wnck::Window
get_mini_icon() const Wnck::Window
get_name() const Wnck::Window
get_pid() const Wnck::Window
get_screen() const Wnck::Window
get_session_id() const Wnck::Window
get_session_id_utf8() const Wnck::Window
get_sort_order() const Wnck::Window
get_state() const Wnck::Window
get_transient() const Wnck::Window
get_type() G_GNUC_CONSTWnck::Windowstatic
get_window_type() const Wnck::Window
get_workspace() const Wnck::Window
get_xid() const Wnck::Window
gobj()Wnck::Windowinline
gobj() const Wnck::Windowinline
has_icon_name() const Wnck::Window
has_name() const Wnck::Window
is_above() const Wnck::Window
is_active() const Wnck::Window
is_below() const Wnck::Window
is_fullscreen() const Wnck::Window
is_icon_fallback() const Wnck::Window
is_in_viewport(const Workspace* workspace) const Wnck::Window
is_maximized() const Wnck::Window
is_maximized_horizontally() const Wnck::Window
is_maximized_vertically() const Wnck::Window
is_minimized() const Wnck::Window
is_most_recently_activated() const Wnck::Window
is_needs_attention() const Wnck::Window
is_needs_attention_or_transient() const Wnck::Window
is_on_workspace(const Workspace* workspace) const Wnck::Window
is_pinned() const Wnck::Window
is_shaded() const Wnck::Window
is_skip_pager() const Wnck::Window
is_skip_tasklist() const Wnck::Window
is_sticky() const Wnck::Window
is_transient_most_recently_activated() const Wnck::Window
is_visible_on_workspace(const Workspace* workspace) const Wnck::Window
keyboard_move()Wnck::Window
keyboard_size()Wnck::Window
make_above()Wnck::Window
make_below()Wnck::Window
maximize()Wnck::Window
maximize_horizontally()Wnck::Window
maximize_vertically()Wnck::Window
minimize()Wnck::Window
move_to_workspace(const Workspace* workspace)Wnck::Window
on_actions_changed(WindowActions changed_mask, WindowActions new_state)Wnck::Windowprotectedvirtual
on_geometry_changed()Wnck::Windowprotectedvirtual
on_icon_changed()Wnck::Windowprotectedvirtual
on_name_changed()Wnck::Windowprotectedvirtual
on_state_changed(WindowState changed_mask, WindowState new_state)Wnck::Windowprotectedvirtual
on_workspace_changed()Wnck::Windowprotectedvirtual
pin()Wnck::Window
set_fullscreen(bool fullscreen=true)Wnck::Window
set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height)Wnck::Window
set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom)Wnck::Window
set_icon_geometry(int x, int y, int width, int height)Wnck::Window
set_icon_geometry(const Gdk::Rectangle& geom)Wnck::Window
set_skip_pager(bool skip=true)Wnck::Window
set_skip_tasklist(bool skip=true)Wnck::Window
set_sort_order(int order)Wnck::Window
set_window_type(WindowType order)Wnck::Window
shade()Wnck::Window
signal_actions_changed()Wnck::Window
signal_geometry_changed()Wnck::Window
signal_icon_changed()Wnck::Window
signal_name_changed()Wnck::Window
signal_state_changed()Wnck::Window
signal_workspace_changed()Wnck::Window
stick()Wnck::Window
unmake_above()Wnck::Window
unmake_below()Wnck::Window
unmaximize()Wnck::Window
unmaximize_horizontally()Wnck::Window
unmaximize_vertically()Wnck::Window
unminimize(guint32 timestamp)Wnck::Window
unpin()Wnck::Window
unshade()Wnck::Window
unstick()Wnck::Window
Window()Wnck::Windowprotected
wrap(WnckWindow* object, bool take_copy=false)Wnck::Windowrelated
~Window()Wnck::Windowvirtual
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2node.png0000664000175000017500000000012612414127675021640 0ustar00execexec00000000000000‰PNG  IHDRɪ|IDATxíݱðøScOx@ –¨y}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_c.html0000664000175000017500000000743512414127676022616 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- c -

libwnckmm-1.0-0.1.1/doc/reference/html/functions_k.html0000664000175000017500000000744412414127676022626 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- k -

libwnckmm-1.0-0.1.1/doc/reference/html/a00007.html0000664000175000017500000002170112414127676021103 0ustar00execexec00000000000000 wnckmm: Wnck::Tasklist Class Reference

This represents a tasklist. More...

Inherits Container.

Public Member Functions

virtual ~Tasklist ()
 
WnckTasklist* gobj ()
 Provides access to the underlying C GtkObject. More...
 
const WnckTasklist* gobj () const
 Provides access to the underlying C GtkObject. More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Tasklistwrap (WnckTasklist* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a tasklist.

Constructor & Destructor Documentation

virtual Wnck::Tasklist::~Tasklist ( )
virtual

Member Function Documentation

WnckTasklist* Wnck::Tasklist::gobj ( )
inline

Provides access to the underlying C GtkObject.

const WnckTasklist* Wnck::Tasklist::gobj ( ) const
inline

Provides access to the underlying C GtkObject.

Friends And Related Function Documentation

Wnck::Tasklist* wrap ( WnckTasklist *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/tasklist.h
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2ns.png0000664000175000017500000000060412414127675021334 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆKIDATxíÝ1K1Àñ­ž ØG•â‚n‚Šà ‚âælÁE¿€‹“ (nºêââêäࢋƒÐMAá@°‹ µât¾ÄK¡à%Ü•Û ý]BIïå%áuÍ…a™€,e × v¯ç¥«ˆi‹º¨Õö–î\tòòuénÄ0ã æÜÉoV\Ì$G.&@Y=ÆË%$um·¢ûÛ6–'Úß«9Qó\bÙ)²º0Ðë-Zœ¥TèHÍ`pÀcsm µö5:>Áë‡Þ¦I µØ ‚F‹Çà]» ›jg—ìoÏáõ©[ œõ š­onë €Ô¬¨vqõ„?\Ðç”  6»øüÒTe ÃÉéŸeç ÀÅlQ ¡c”€ª¬ü3*d€ÅWTMÏ\rÿÿh6™ø1±F ‹°fžIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00001.html0000664000175000017500000002446012414127676021102 0ustar00execexec00000000000000 wnckmm: Wnck::ActionMenu Class Reference
Wnck::ActionMenu Class Reference

This represents an action menu. More...

Inherits Menu.

Public Member Functions

virtual ~ActionMenu ()
 
WnckActionMenu* gobj ()
 Provides access to the underlying C GtkObject. More...
 
const WnckActionMenu* gobj () const
 Provides access to the underlying C GtkObject. More...
 
 ActionMenu (const Window* window)
 Creates an action menu for a window. More...
 

Related Functions

(Note that these are not member functions.)

Wnck::ActionMenuwrap (WnckActionMenu* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents an action menu.

Constructor & Destructor Documentation

virtual Wnck::ActionMenu::~ActionMenu ( )
virtual
Wnck::ActionMenu::ActionMenu ( const Window window)
explicit

Creates an action menu for a window.

Member Function Documentation

WnckActionMenu* Wnck::ActionMenu::gobj ( )
inline

Provides access to the underlying C GtkObject.

const WnckActionMenu* Wnck::ActionMenu::gobj ( ) const
inline

Provides access to the underlying C GtkObject.

Friends And Related Function Documentation

Wnck::ActionMenu* wrap ( WnckActionMenu *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/action-menu.h
libwnckmm-1.0-0.1.1/doc/reference/html/functions_g.html0000664000175000017500000002610412414127676022614 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- g -

libwnckmm-1.0-0.1.1/doc/reference/html/sync_off.png0000664000175000017500000000152512414127675021723 0ustar00execexec00000000000000‰PNG  IHDRàw=øIDATxíÝKhTWÀñÿä1I&3™8M¦Iš™†I3Ú©b$cÌ I1V1±-(Tö±±Ð.* t!‚K[¥Ä¥ˆ„¨´f£`l(øl©"Y”¤6ÆgÌTú}·sgîܹ ±d{8?æÌ¹÷;çÜuíÚ`:!±F¬¢BäŠ?ŰÄm'yÊÅ>ÑlU¯½üý‰è_‹?€Œê ]€Y(ŠNñ±8fý1°Öqún-eâ¨øtºmâÈ Ó0}b›ù%·©µ×Œ®=Ÿ0´³?Š1sŸ‹0€¯8À‘;_ ‹W|%\ Zð— >舽ln¨p©.aÇ{ )t;Ú b nŸš¯›65°¢¡2çÅÔ?Žž>Oдàuönm¤¢Ì`×­Z¬WjC~>‘Ö¾0+á {{©fÝ×Mæ·æÅ•ìÙ¼˜` Ý›%uA6´½ÅÆö¨Á,]k¢ÄW¼™u±›]‹ˆ7§¯iòh€ ¶¶¬ÏÖu1 ló —Ҷ̺–:ÞÍ\ÄcãÏxøhR²Êè‡Qt$¿ß§¨ ª fdºü<4BÿÙ[•f¸d7=.Mé9/—éªÃëù/ÿO Üaàò}€,‘j?Ÿõ.5Úšm?œÿŸ®ŽXÿ2¬#¸d píæ(£?cÛú¼!½›a1¥Þ—ŽòØ©ܾ7dÔK:‚ùÒ‰ì)Ê3‚Ü™àÌà]€,±H€µ+køöäu<|`·LhC7¹ÔeÍ Ÿ×Ÿ˜tÜ‹ óH$^2%l.êaeÐäýE”ÌÉ|ÅÜìî‰Ýsä }¸ýDû^hzé~ðR›¦Ã¡¿]|#ü¯@×—Ö‡[k¹–<|š(Ç*€Ý¹dÇtMé:Ýñø«Ø,êÅû¢]”' øXÓ_nò¡Æ|Øý /c§fžâOIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/bdwn.png0000664000175000017500000000022312414127675021041 0ustar00execexec00000000000000‰PNG  IHDR5åZIDATxíË € DŸP–1ñlžmÀ r±j².e è†D[ØÉ¾ÙÏÔ¼µ¦ã´Þ|陣6€Všë3´Å?Ls'(}¬>+ žKó÷¥¿ch`‚ ^׃ÞnIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2mo.png0000664000175000017500000000062312414127675021330 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆZIDATxí1Kû@ÆiƒØB…Ò¡(h¬"EÄI'ÁoàªèÚ©ßÀáâä 8ùçR-‚â B«TPˆï]z¥B’3 _Þã’»ç}ŸË]VÇ÷}€ÌÈdIæ®i쟯JØ–b¸šÍÃõ+º™|KÂ…°,[Pï\ʘMÆ¢#€ä…F`JݤìÛk³úA±àþè?ØY4ck6"¹Z)ê¸0SHM¨@ï㋺WÖmo¼4èHJ¨Àÿö+…QobŒút ¤ú’*Ð~êè8_+3Y-ñðÜå½÷ ˜PwA¶+^ý}ºì£+xìhÏ•MAE]€TD~EÞߴ^R)`ÖAùŸÏ9©pÔq-Û¾õÛ3tÝÊÆ›ˆÃTÐHÈ)€ ½Š’ICªxëd#1ôú§é€ m@Vüý?Zæßgo_½3-³\IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_f.html0000664000175000017500000000724612414127676023634 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- f -

libwnckmm-1.0-0.1.1/doc/reference/html/functions_s.html0000664000175000017500000002053112414127676022626 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- s -

libwnckmm-1.0-0.1.1/doc/reference/html/nav_f.png0000664000175000017500000000023112414127675021177 0ustar00execexec00000000000000‰PNG  IHDR8³»`IDATxíÝK€ EÑ–·[†øBÑmkâÄÂH—prÓ¼.‚Žó‚ꎤR6Z VI±E‚5j³„lóš›iI˜¬ÞêçJ0ŒÑÑ/Žû›™uøñóÞ¿6sH ÝõyIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/dir_7e277d1c8964287c2547294aeab69608.html0000664000175000017500000000510612414127676025244 0ustar00execexec00000000000000 wnckmm: /home/exec/code/my/checkouts/libwnckmm Directory Reference
libwnckmm Directory Reference

Directories

directory  wnck
 
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_h.html0000664000175000017500000000742212414127676023632 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- h -

libwnckmm-1.0-0.1.1/doc/reference/html/tab_a.png0000664000175000017500000000021612414127675021157 0ustar00execexec00000000000000‰PNG  IHDR$ÇÇ[UIDATxíK €0C'o¤(Šˆ[Žà%Üxÿ#Ù©­ç ùÁöó¦W¦e# 3t I 3+¼øEã~\D½9¯Ûàè’wM·¿öÿ}Yõ_êA4Yžã}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_n.html0000664000175000017500000000725112414127676023640 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- n -

libwnckmm-1.0-0.1.1/doc/reference/html/inherits.html0000664000175000017500000001024112414127676022116 0ustar00execexec00000000000000 wnckmm: Class Hierarchy
Class Hierarchy
libwnckmm-1.0-0.1.1/doc/reference/html/doxygen.png0000664000175000017500000000730312414127675021572 0ustar00execexec00000000000000‰PNG  IHDRh ;ˆØŠIDATxí]y\•Õº~45%TL Q”PE"q–Û11±]8a„w*©¨(*â" ˆzÀè`8 ¨‰¢mÅ,’òà„p$%”œBó(8k†Ü÷ýÜû6lòö»§k÷Ç÷[ÏÞß·Ö;?k½ëßÕÕÕPxÑêÏ't´ÏùÈ€zÀÇÅ3_€Q4€g@œmÿ ¾ò‰âci‰ôçÿ{ ðÇð¬ù~½Á€4:õHcÂü ðŸÁ³„ª'ÕPÆæ P7^h،♠zb„cóP¨„ 3‚† Ò}çÿO²qÁºNkÝTÛ(É?d Ç~z<’«4Óǡ؞Þv­zµÙ¦õ¬ZâdÛ,Ë6Ók±]Fz< ¾ZçƒsÕ?ìƒsUø2SÉåwê1”c`[ì—}%ѽ.Ô¼6‚BLZ˜û!F8[ ¹…×TéÛ— »Þ#gó]å:vžu?‡vèbÙR˜?wùŽŸ¾ÊÐgbÑÉÌÕ$kF~Ê;عÆ•¢ïX®?ÉèlÆÙôõà»Nʪ¼­,ìHC§gAz•ÆlÓº­gÑú ]œjÎñåM…3ÓÚæoÒ³'=‘$Ò÷f}G•ŸS_‡öèco.Êȹ :ó£ Ãds®Ù:1=¼{ƒå9?÷ý…zqÛvîÓi‰D’p¿Ë šmÙíoÛâýaÖüEqÒµwÌ}¿~{òj€ç{ôºŸFNëí[ëOq·ÇOSúXO]°>‚‚muæÄ¾e¤“5Ë{¨JÕ¯£(›´«bÂçû’ÍlÓÅ}žïú`éUÞy„ac§Á†ÔCºŠóAkl‘±y¥†ô¢ùôs÷Aø¬7ÄõôoJ±äÄ ù.¥Be. Z¬Ð×ÇÈöå¹­ù'Ù-PëìŠyF.ž‚žÝÚ€lp&.êˆð•jò7’re’z19»ã§HGíø%œüq°ïüz׈c¬_k_")ŸHJnÐÑ~ˆÐÖ˜á´äÕ5 µÁq€ÿ5#¸·îà¶+9T‘‚ ðŽ÷Rܸrz“Ï´Ì =Ï…{ðáO£Èf ¡Íwg|Ž’Ü/¢Þ$÷¯¢ëðúÀ;¿à¨Ö™âÒÆ­]¯ÜW"Þ/< ‡÷DÏà°½üB}çyIEc^—ƒ=[V“Ýh²ëMä$l];Kû®¸ýr¦È*Åò ÿtÒõ$]•MŸ÷´;×I€1èó!‚œõ¸M õ¨(fÌæ<ÁÎÎò5~z¿ù¶ž mÌêÕ >–âÚ©âëˆIÎÞçz;ãu[i·eç^ÆÜÙÓ³NÞëF6B\}7†»+üŽÓ,Ã'a ½˜-yHY¿,‘^—ñfú~ß?Hcø¸…¸ñó{Z+4\såƒû·¯Ù·nߣð«íFÆ¡sغëû§D¾?ò<–Ævkx0ÅM±ælذÁIÓxÿd”žÜÉ÷EE»AªM«g*È£YEí7Û™^[uíý®v[wGå†=Ed¼n×¶ÆæÖÅl¡'¨pGÚk+‹æ¢À¬¨C8ªâš2 dz3H£ß ¡¨BÒûSÃÅù[wŘ ~xpçútÁæmö¤Å£¥iQæ­‰AB1ÉfÙ‰›4u¹ïìIÒ]Ë6äò%ÿ†† 1t.’NJph¬zÌ ÎR1Ž"3-"¸‡‹&ìó°1âüžìó[:‡ï„¼‘……N m–“W0®_èÜœ ×õ6ùò&»)Æìꦬýæ}¬ñ~»{múù]z½£M•ºP~^Îá:eQTÙ_*7ÕÄ9É8—·Ëï 3°¶47E•î¿u÷“SÉ»U¯ _ NíºôW¬e¸ÄNÓ|»;™¿;ŒæÅd"ȉôøòÞµõï¾®½"èÄ´ÖMM+bYµ‘_ÉæEÝüÎ]P»¹XKÐI½Þ¥oE<_¹(„EP±Œ|mÇÁ¡‘Ý,ŠÓ©ººZ±Îߺ§×kÝ,kÍMš`Äø…jzeU»æ ™Át3ÓÀ½˜6—ÒöùË·r¨¹Ñ}““wö:Χùë¼ ¿|‚TܵÉQˆKßç_ÁâÀ™œ”pÑÐóໃ¼Ydâ0!®àa –øöçW$ÃÁ‘Á$/\¬$ð 2ÞímÞLH‹Ÿ èd£HVÜ,:ò½»RÍZšJ­a„z*>‹_…NT(ù‚^SVF­U¹8ñEþôñ܈óùnd;«®8™\C]ø=Èêm¬Æ:‚´ÆbãDd=Áãßžˆ‹UU5O‹|]þð®Pèêv‰á\]2ßìÿ"yÈ[ïyʧz£g{Y«{„Ùø5©ÿ;w{N3é­nâĨw§Á¢ÍK¢Ý­ûÏ29Id¿’ì y)ìPÞò8ŒÅ©¯‰±@mPÔñwjl,6 áhWÕ˜d öà uõmÁp®.™á£Ç…twöR x­BδYcŒxg*vo  yò‘•“[¬?ÜVœ˜0ÒN¡O난~Žó’¯·h#´Hkýœ±8kÓß^Àq@]àÓ“ø,56´¯÷Í-κU»n…[>]@nîøÏœp›[œ6# €4tën¯:ŽÒþ}…—8äT9_žY$/´G’K™©ù†•(óÑ’Mø©`ŸÉdѺ;ùO‹B Ó&P{qöhJÉ+Úé–§¦l2«MïöÝ_1ÑÓ«’t¸½±l€ëØya ¦ô©«®½ÆL^¬žêñš¸ùy.¾Û½Š[ u/]½‹iS}øN>²e1™q‡jfÚ&¢©iT\=kÏ›ÀXô-.84V5ðu!TE˜ þ.ŒOH´¶4—zwTr.ï‰¦Ë xõµ·œÖ„HÆù£žÈHùg Ñhñ’T$ßyq¸zþ¨p¿´ë< q•ró÷š‰wÿÍÑð–I]´–æI²é²˜sÂ"×:Õ–bÕ¦“ÈÙL6¢9VÊÓWž§<æ;”3?ý©Mê3AV#µ±ËÞ¯‘ž K£UrÝ9!›qát¦H£Ù+6ÇV…/TS^pÃùqgLP'Ú5E ‚–ÀÞºîÄ Ën"2|Ÿ;®W»Îý"Ö¬TwÖâµtúŽO'› á+W Ã+¦âZÌ–<ÕÆ&nOÝ,IŠ£06.ÁZ.Çñúøh*INÚ’Oe½ÉgBXÐÔZóäøä9èü“hÒíDSš¥¡Ê µA¯/Ôc¸ö“`A§¯"zå|‘ €ÅŸ¨ú;HÍ#‚Î|%ÄOˆƒ«OàÌÉÐÜD ž mÜðâc–ƤÉÂqm¶uË&~÷núÒË £ÇÏ€ZÕj =«_n[‡‡÷nN§ÏÝ$_¾bE˜‚€Õ)ù8¾?6‘lú“ÍÙæÖ}#bW( œ³d-®•p&¡ý’œÖa”"9öõņÐ$’Ú›AÜ!ä;ÐÑõè{~á¹8‘ÛÞ£1ÛÓÉ0ž`²#´kÒuäNÅÖ Q¹bhæ ”8ûÓMáŽa›•¿”w±h²¢®qŠæ°(bK ‚’Z¾Ò%ÐÆémáãÖË(Éý‚ÛJ)@> þ›7% ï{y Á“¾ÆÒîohfòô>{pÿ.­_Î%±ÉèägëlZØ\B2B #™¸ÚüÒºp‚hÝšü®[¥Ü<‹#SpñÌA7’ãØHƒt4:Ÿ|g¨tÓL¶*($Æ©»ì…®ù’ó÷$;b›ÔÙ`=¶£¦M„MÌÄ5ò«·Ç¾“H·ÌH.¼žHeAîº5}r­dõ¨±)ÀT};€Q5iÖ2…O0ü…0óñÃ;óæ,Š´²µ냔}g‘£]‹7å9ˆà©_{üèîêžC>úhê{Ž .ÈìðIIð€?[Kswz6Òuíý¬;µ€ç§OåâJÉa˶zv°éd† ¤µâ‚l´é舊«Åüy¾c÷ÁèÖÍ'ràúÅ™TWÕôÓ°¡L €|ʽŒ¼ì­høBã ÝTëî'ò]Kø£ìâÏ(=¹Kx €¿ LÌ,Pý¤Êµu‡¹…׈ §Å¾÷à1Ý«Äý;¿pGDäxZYÛ kfæ6¸ùóæ7®œ®þ6·ÕoÚ¾ÔH~ò®Þ¸â 8Uø“p<ºw3¡a£ÏÑ’‘3èÏ"€bˆ-ÎܺÏ_ªÅ]+ËM©zü°s“f-êçhÇãÑýÊãôÿ5}ZQNb{Ó?å%ÿ\SUõعIÓæ}~}p[œoÔÄ„êÐMMZáNÅå@>Œ„²á6(?¡Åé âK½+ü?À%ÝÝ·/Ç1‚9áUø?B)”ÕèâÞlÈÒêÏ @=àùÄÞžk­®ÅIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/inherit_graph_4.png0000664000175000017500000000602712414127675023165 0ustar00execexec00000000000000‰PNG  IHDRó%—‘ß bKGDÿÿÿ ½§“ ÌIDATxœíyT”åÇ?ï ˰*  €&¦¢‰X ‚„¦æ‚š™Ð¢m–KæÕŒÌôf)˜iz4K#$¤›v. ]p©ÄTJM\P®™˜*”È&û6sÿ‘ѹLÏçœ9ç]æýý¾ó>¿ïû<ï’Z­V#Ú;±2]+mƒ0³@ '3 z‚0³@ '4^P^^Nzz:*•JzÚ-2™ WWW …®¥´ŠÌÌLfÏžMyy¹®¥´ P(ذaNNN·­»ÍÌ7nÜ 77›û"N_ÈÉÉÁÎήݚ9))‰]»v1yòd]Kh!66–©S§Þ™™oâæævOE鉉‰º–Ð&ÄÄÄèZ‚@ ’$i\'Ι=A˜Y Є™=A˜Y ÐÚÈÌjŠÓ¢x}XwÌ$ IÞ‰þA«9œwooåmÃσÏ2kî_ο1‹ºK8Ÿà¯Yªl¾ò“#y~N}TòKh/dŽsI.ke¢Âx†Z¶°] ã*IHM~˜s¬b´é(Œg¨¢.®ë°MÌ\}ù+‚|g“侂ƒ—²ùýxÃÓßeÌóÑdݯßdîÉ?#BÞ±} 6®\ÉgÆ}lܸ_×RZÅÈÁJ®þ˜BN]ûª “‰IVÁÉŽäªo.äÌþ‹˜zŽ¢§É}g9†ùyäåå‘wi >†v¼²÷jí|þ9>xÅè°Û c'Vÿ“ûÌ7«‚ðpûS,ß<Ž?¬eçÕ»psKŽÊFNŒ ƒ«™æK÷º&7·˜Í›°/¯–/ßMdäA]Ëjnã=08·‡_JjçKR·‘båƒo‡SD§Ö.,;ÏÞ4è7¾?÷Sœdˆ¹Òkkk¬•æÊd(,oÎ[¢ßÃÜwR‡­mÜwoæòslÏÁýÕqtip×ZñÐ2Nÿù/8Ê¡,­³}p4’$szŒZÌwÙÕµ_,Œg¨µ/ŸFÌb RB’Ù3<ä…ñ U>AbÑI^s~„Ï2«È;¼†gqĤnȤpðä¥ð4JÔܺƒ4ÅT•—‰_0œn&’¤Àù±ì¸RÕ@‹›bßÁ·£>›³¸Û…ë׋‰ˆø‰€€u<ôÐÞ?Ž“'3©}ó´ý¾}j=0€ËOp £(ã\ÜAÔ#ÞfáhCŽl;C P•}”¤F{uB¦µM2‰[0’ÌjÛUÙ+€÷þ ºqRU.ÞêO‡¾óHÈ©ùk8íûïë¨NkU®Ò^GÔp=q9z[ÕË-{óäêc6,„Æ:r‹Q›ˆõîb2·ÄD`ƒÂËNªmä7þ.b¤~ßµûxÍωž¼¶Œh·Hö]›ÆKf ¼—®àeëí…š5 ¿Ï?þJM ¹\†JÕ¾{`˜ôd´— Q{ÎRøX:ñWûðº§5Vò Üs—ñý¥%ŒÜ—†4àUz›7 É6É?ɦ/2´z³‡Ô<LJâÚÛYHP¨ I ÅÜÈ\Þ8±šÑ¶u0ìˆ)Sê5œÖ¦»™:2)%¿L޵“+.]0y&’ cË0¨9ÀnM:4Q£%VëöºVîÞÌFéÓ©ˆäŒ"T>¦õ=™ºŠâeÔär±Ð’žÎõ=·±C?ìe›¹”W %];Õ¹Q&§éã‚Yî!ÂÞß·?ãtúŸÈœºQZ­á'4³êO~ý£„mõ¸Nœý³ºr%ζ-¾zýúd’“³‰›æU©šBåç—âàðF‹óÝ Œ]ZðmsúïKEH"'üLºË$|mdȤÁõºÌ¦½©XΥNjXÝlϦڤ2‡ô|+úô°ªo™VFõ©J.²5ùE¦Š%"t7óc&a×ê­™:²ð!dÍSLúGoL—ôÄwØ(&Ïz‹™·B‡¶X÷€»7³¢OŽRÇå§gà\±â¿!¸{ìdî©õt³¼Azf1joS$ 2;l•’®Öõéµï²‚‰Ý*9½y&“Bá“ ûxÑan,ÃÈiá "𚱜WRW3Èø {£Q™ÌH‡œúiçÛιêi®ŽJŽ3×ÕC/ìfWð#øùºÑac CI³M¹JŽjŽu³®‘·î Ômr3̰ûtâ~ZÇÃÇâ×­3Ž}ŸçÛwØ; g3 wnckmm: Class Members - Functions
 

- m -

libwnckmm-1.0-0.1.1/doc/reference/html/inherit_graph_2.png0000664000175000017500000000550412414127675023162 0ustar00execexec00000000000000‰PNG  IHDRÛ%Ëœ)bKGDÿÿÿ ½§“ ùIDATxœíœyXTUÇ?w†aE—ÜE0DMÑ,Ó×,_s)Í7µ"—×Ô´¬Ä½|ßžR53—’Å^Â]K(wÅÅÄ44TFdgÎûŠˆ9Œæý<Ï}žûœóœ{¾÷þ~ßsÏ=sïHBŒŒÌ£&ZQÕ ddžd³ÉÈXÙl22B6›ŒŒ…°*¯P§Ó‘––fi-Õ…BA£FP«ÕU-Ådbbbˆˆˆ¨jO$jµšE‹áååu_]¹fKOO'??FóÈÅU7t:®®®µÙ¢¢¢HII!  ª¥“5ÿkFF.+Wî!,,®ª¥˜†)ñ³µ°F•+#w\&33“ÌÌ ®œÞÊ¿k¯gø hªñ«3d»=Íûúc•²SyÅ%yI1$:Ò©Æ1"³‹ oþÊŽdhÙ×G•=¾@#ûŠ—I+Å#¾;ææ“È AKhÝz:S§®gñâxŒÆÇiœ½ƒ ñ³´DIZ㌳³3ÎÎ5¨óTc¿˜_Z›R -­ÆdÌ`6 ç6}h\p„øsÀMRbw!žÌ”^Öì‹9APtåû³êÑ«}-¥Ì rOñª5% ɶ}ç ÛX|d‘Š#ü©!IHš¼2{í= =xôù~R|l%$Iw÷IÄ]**6š¶ 9GyÓ»­Ù —›[Htô!BBÂiÒä=Æÿ–Ý»Å`ðXMfÊbbüœ;±pùÚh%$…=Âö‘-ýb'õ¤}ñ”OÛ¤n¿Ê­²Ý3ˆ×—-Ʊ]g(™.vZwQz¿"ÙJk”€þ–‘Ì= x¥­¶·§™j÷v _šLž01‡ Xs–E¿G§šö~•†±’WÚ,ó8+÷Ît¯“FüáLŒúólÝžÍÓ:Ò18€ÂøXR 7yç´òV•j™ËÞɽ½Å‡w§r9i1m~þŒ£yùžÞ›Q?¶â³Ã¸t`> 7Ïew¾ Iž×›~S“‰ÛNsþ— ¼©ú’W¯ä‚ý‹ÄgÅÒÕÑðß1ÆKiòyذáÆ-£yóiŒÿ-¤b4 ãm£=þ˜¿œ=|¼²6Ÿ$grvmŽÍšÂfÝM’f>OÈ×öŒÛz–´ ÇYõr:óƒÇ°%³Ôµ2d²ëƒç迱3kw. gm%صaêêÕLpD*½ŸZþzk¦Î ±Fwžw;ÎôIðŸÏ®sWÑ]=ËÎë±y\(ty¦åБ!gSæüÁˆ¸$b¹UÞ,¢’““ErrryU-¶õwÚ"ó|¸xZ(V¦„áÚ·¢›cS1óT–8ê)z®×Bˆ¬XÑÕÑO„ŸúIŒ¨m#º¬J†ÛG*8þ¾¨oí'ÂSöˆÑnv"hÝ5a,U×7ñöÏ»D¨§½è•^RWt~¡ð³ï V\6Ü=þï·âŠùá‡":z ]#6œ,ÜÜÆ oï‰ÂÍmÜ7ƒÁøà,@pp°~ˆ&ÄOi+únü£¸yæzñŒƒŸ?½W¼å®KÅS Ŭ¢Àp»}}1l„¿°Æ[L:róÁÒ²bE×â©Ã=›Ò»·˜»÷aE"7+[ä—„Ú rŽÎÍlÌCJµè—ù×Q@DFF–WUáëZ‡-û¶ 0,#ñ{9S¯?j+PHØä"Ëv$¡Ù“AÃ×üq*=T²¸˜«¥iC§’QÃÆÃ›Mpë:¿e9ÒÈË¡dt³ñðÅ]¥súj?„¸”m¼øåšê›~&Ñѧˆ‹;sO™^ß$¨\<='˜Þ±qttÁ×7ý!Z˜?+-ukÙï+”HP¤ãÌN4+O*JÍfòRY{è5ÞèÍò™›˜Õ×M>T®ŒÜt„ùml …µŽªÛ}»YòÑ6ÿ|ãg®¡ðò!ÿ–UåsH©ÅÛÅ|ïÈšÉl j¶ïM½´µ,H£vŸÏð´p£[/&®XÆ7ç\éXçÞ­jâ£É&å·ìP…i'¸¢”Zê:ÜàìŇ$ …Ãi&³ªnWžqœÊ’ý.¼± !Åcž5^Ïõ¡Ö”ùìׄÖ¨Ì(aÛ’á]˜JDƒOèWû,+Æ~ÎY½صbø€<óî$Ö4šAw»“|9v!gQm+^q"hÜdÖºL£Gíëìœ7˜×·õeOò<üŒ…ÜÈ/B üó@–ÁÅÅŽ žfîÜAœ>}•˜˜DÖ­;@FF.VVJnݪxÁ¥OŸÖ(ÌY½úáWèLŠ_Yl}9Ø•À ¡DxÎá%=Ç¿Mÿ™ðÅÙyÍP¨p°Q òÃÒIËi?j#“>¥ƒÍ%vD& :ÓÓ]ww_ûáÆBrô¶ÔëЕöœÈOÙŠÙë@/cÓÊå™1ß]vMèÝV y¹¹]I±ú©yÖ¤Vÿ …}ÙFö´Ÿ½‰e½Rù Ð÷–oqâ¹É´wp$pÞF>ïx7ý½ðè<ƒô÷hoc…•#s·Ñíïvð¦Žw{&éÌ¢¸é´Vê<ÛâSZ±â’é«‘×aÚ´>$%Í 66”aÃÑhÔHX[›¾ðR-1)~e±§Ý¬m|ýÒf5ÀÍ£)Vªy;r ƒ=Ê^/[|'.c´a!oü÷ù‡™=t(3öå Jï?¨K‡Ž„}>ˆ¼° ÅG\!ùIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2plastnode.png0000664000175000017500000000034512414127675022707 0ustar00execexec00000000000000‰PNG  IHDRɪ|¬IDATxí=QF‘Ø¥D«ÔkÄ:‰F©PK؃=V@§Õ³ Õ8SHxñÌ0bnrróŠ{ò½¿¾’$ ÀÏTŠP  ö¼X¬OÛd6êìòð"°²S´±O¥B€(¡àQé)š+YĈ ÒªËRÉÐ>VtÉsˆm9(ê„䜥k‚-@ȧ-Ü$ó b Ò[he ¿Kp-ôl|CùÿApRG'rÍ­aIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/annotated.html0000664000175000017500000001405012414127676022250 0ustar00execexec00000000000000 wnckmm: Class List
Class List
Here are the classes, structs, unions and interfaces with brief descriptions:
[detail level 12]
oNGlib
\NWnckThis file is part of wnckmm
 oCActionMenuThis represents an action menu
 oCApplicationThis represents an application
 oCClassGroupThis represents a class group
 oCPagerThis represents a pager
 oCScreenThis represents a screen
 oCSelectorThis represents a workspace
 oCTasklistThis represents a tasklist
 oCWindowThis represents a workspace
 \CWorkspaceThis represents a workspace
libwnckmm-1.0-0.1.1/doc/reference/html/modules.html0000664000175000017500000000422412414127676021745 0ustar00execexec00000000000000 wnckmm: Modules
Modules
Here is a list of all modules:
libwnckmm-1.0-0.1.1/doc/reference/html/nav_g.png0000664000175000017500000000013712414127675021205 0ustar00execexec00000000000000‰PNG  IHDRô1&IDATxíÝ1 ÁOHf„á_ ->~¸åM iËMèÀƒS½ü‚<IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_w.html0000664000175000017500000001110612414127676022630 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- w -

libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_u.html0000664000175000017500000001103512414127676023642 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- u -

libwnckmm-1.0-0.1.1/doc/reference/html/sync_on.png0000664000175000017500000000151512414127675021564 0ustar00execexec00000000000000‰PNG  IHDRàw=øIDATxíÝ_HTYÀñï8ã¤ó§i§4-g6ÆËÕ&kQ)¨Ô!Š0ÒURKÚ…„ê¡/»PEÁ>ìK-+KÁ²Ñ.Y”¾dEPaA‰ø°¥¶›ZSÓïÜ;3wºŠ–¯—߯gfîïœsçœWKÇñ.€ÉøD­¨a‘'¬âq_ôˆk¢ÀŒ ÀDŽøQ´ÄïC¨¶åñÏÿgÅ ñ 0„Y‚:qZ¦Á)~õâ€èLý0HVñ× žz-¿‰C“%¨g¦˜6€é8%Úõ¬ëwêÙUÏ¿˜ª³Ä }? ?€·3ÀÀž©Š À”K• @hà a±ðaÇæUe‹ sù~ë2²ì“&Ú&B*AÄljæºììi*˨,Ëçí»÷oÆ£T”,d[˜¼3-*ÁÀ…>å‡Ë çLÉŸçfk˜Ò éw#*AEjKUy>ûšËÉõ&{µ¢8—m5Ki¬ jjƒD*¿NŽÖigwÃ7Dª’mz骹úKÛ¾±ˆ¶M!æ¤ÍkÐ?šoý¬_åÓlXí#Ò~–¸¬ê×ÒÑXŠÓ‘ùRÙ*Eû‚ՂדðEÜ;6«e"Q(²Ù=–¿Ezæ5Kؼָ_ 1òzBªJë ±XŒì96åªjL^7{ùãJÑ÷1½i@%8'7M©_\Qœ#ÓUŒËñýÿyõ Wo Éx8¼s¥v¯ªì|×SnÜ q_m Ýé î>bèÕí[JX,½4[Tú{R£ë¼ôˆ¾þa€tÝjjzzÅ'ÅìȶiIžŽòwÏs ¡€—ÕKøõâC^ŽŒ˜Y­¨µÉ%6¨´êˆº]vÛðhâ½iWv–hôëê°Ò¨¾'æÌ‚·ñ|[ßìúÅ^€YrD=<ýDû]äÇ÷s€Ïõ‹8™ºCì? À ¨—t4õᩎ¡Jã‡W‹É± îr¼cjMɘìx| šE©øNÔ‰œøA¢þ«–€Z¼ñ‡jó î#™§¢¢4gIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2cl.png0000664000175000017500000000070512414127675021314 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆŒIDATxíÝ;H#AÇño4Љႇ œ„K‰‡‚á ’ê,m„ØØ vÚžJ°²¹ÚÎþî‚§ XY ÅB|dr³cvo—˜Ä°Ý ù0Ã’™3ÿͤõ”Ëe×´¸Éõ¯1XÞ8Œ‰nQˆ88ööÖ§3*rbñ¯¢û-$¨‚þ´˜“P1Žè@Z…-# Ïú01ÑÏÎêÄ1HkKŸ w¶O@¥ªÈóñ!f§ñu˜åác÷;’sá×Bý[E´Añ±—Í\ß>°ùý¿ÏËÊÂ]–P€zØf| Íñ¯“+Ù´gð5…b  i5ümM³œ_æÍq,ÒcŽõèoÓd´ !¶äò©ô•,ôðÀ{¹¨µYß,€zTÍ8H]𤕘ï7¼»/òó8ËQæ !F€~6ãá?Y ÀA@ŨÁ.@ƒ¶TäÄYïŠËë±r‘µ8Ð*·é>€Šçÿ?€×þŸe[6«xÂIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/namespacemembers_enum.html0000664000175000017500000000611412414127676024630 0ustar00execexec00000000000000 wnckmm: Namespace Members
 
  • MotionDirection : Wnck
  • PagerDisplayMode : Wnck
  • WindowActions : Wnck
  • WindowGravity : Wnck
  • WindowMoveResizeMask : Wnck
  • WindowState : Wnck
  • WindowType : Wnck
libwnckmm-1.0-0.1.1/doc/reference/html/a00030.html0000664000175000017500000001715212414127676021104 0ustar00execexec00000000000000 wnckmm: Member List
Wnck::Workspace Member List

This is the complete list of members for Wnck::Workspace, including all inherited members.

activate(guint32 timestamp)Wnck::Workspace
get_height() const Wnck::Workspace
get_layout_column() const Wnck::Workspace
get_layout_row() const Wnck::Workspace
get_name() const Wnck::Workspace
get_neighbor(MotionDirection direction) const Wnck::Workspace
get_number() const Wnck::Workspace
get_screen() const Wnck::Workspace
get_type() G_GNUC_CONSTWnck::Workspacestatic
get_viewport_x() const Wnck::Workspace
get_viewport_y() const Wnck::Workspace
get_width() const Wnck::Workspace
gobj()Wnck::Workspaceinline
gobj() const Wnck::Workspaceinline
is_virtual() const Wnck::Workspace
on_name_changed()Wnck::Workspaceprotectedvirtual
set_name(const std::string& name) const Wnck::Workspace
signal_name_changed()Wnck::Workspace
Workspace()Wnck::Workspaceprotected
wrap(WnckWorkspace* object, bool take_copy=false)Wnck::Workspacerelated
~Workspace()Wnck::Workspacevirtual
libwnckmm-1.0-0.1.1/doc/reference/html/functions_i.html0000664000175000017500000001420712414127676022617 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- i -

libwnckmm-1.0-0.1.1/doc/reference/html/a00002.html0000664000175000017500000006047112414127676021105 0ustar00execexec00000000000000 wnckmm: Wnck::Application Class Reference

This represents an application. More...

Inherits Object.

Public Member Functions

virtual ~Application ()
 
WnckApplication* gobj ()
 Provides access to the underlying C GObject. More...
 
const WnckApplication* gobj () const
 Provides access to the underlying C GObject. More...
 
gulong get_xid () const
 
std::string get_name () const
 
int get_pid () const
 
int is_icon_fallback () const
 
Glib::RefPtr< Gdk::Pixbuf > get_icon () const
 
Glib::RefPtr< Gdk::Pixbuf > get_mini_icon () const
 
std::string get_startup_id () const
 
Glib::ListHandle< Window* > get_windows () const
 
int get_window_count () const
 
Glib::SignalProxy0< void > signal_name_changed ()
 
Glib::SignalProxy0< void > signal_icon_changed ()
 

Static Public Member Functions

static GType get_type () G_GNUC_CONST
 Get the GType for this class, for use with the underlying GObject type system. More...
 
static Windowget_for_xid (gulong xid)
 

Protected Member Functions

 Application ()
 
virtual void on_name_changed ()
 This is a default handler for the signal signal_name_changed(). More...
 
virtual void on_icon_changed ()
 This is a default handler for the signal signal_icon_changed(). More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Applicationwrap (WnckApplication* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents an application.

Constructor & Destructor Documentation

virtual Wnck::Application::~Application ( )
virtual
Wnck::Application::Application ( )
protected

Member Function Documentation

static Window* Wnck::Application::get_for_xid ( gulong  xid)
static
Glib::RefPtr<Gdk::Pixbuf> Wnck::Application::get_icon ( ) const
Glib::RefPtr<Gdk::Pixbuf> Wnck::Application::get_mini_icon ( ) const
std::string Wnck::Application::get_name ( ) const
int Wnck::Application::get_pid ( ) const
std::string Wnck::Application::get_startup_id ( ) const
static GType Wnck::Application::get_type ( )
static

Get the GType for this class, for use with the underlying GObject type system.

int Wnck::Application::get_window_count ( ) const
Glib::ListHandle<Window*> Wnck::Application::get_windows ( ) const
gulong Wnck::Application::get_xid ( ) const
WnckApplication* Wnck::Application::gobj ( )
inline

Provides access to the underlying C GObject.

const WnckApplication* Wnck::Application::gobj ( ) const
inline

Provides access to the underlying C GObject.

int Wnck::Application::is_icon_fallback ( ) const
virtual void Wnck::Application::on_icon_changed ( )
protectedvirtual

This is a default handler for the signal signal_icon_changed().

virtual void Wnck::Application::on_name_changed ( )
protectedvirtual

This is a default handler for the signal signal_name_changed().

Glib::SignalProxy0< void > Wnck::Application::signal_icon_changed ( )
Slot Prototype:
void on_my_icon_changed()
Glib::SignalProxy0< void > Wnck::Application::signal_name_changed ( )
Slot Prototype:
void on_my_name_changed()

Friends And Related Function Documentation

Wnck::Application* wrap ( WnckApplication *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/application.h
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2vertline.png0000664000175000017500000000012612414127675022543 0ustar00execexec00000000000000‰PNG  IHDRɪ|IDATxíݱðøScOx@ –¨y}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2folderopen.png0000664000175000017500000000112512414127675023050 0ustar00execexec00000000000000‰PNG  IHDRÚ}\ˆIDATxí]?oÓPÿ9iš4i°;ii“¶‰ZЉ‘‰ÀÀ7`bèÔÙ¬Øù,HìU'ô$*Tµ]‚T¡DPÚÄ6wÏ}‰;¡C; a¿ÓߟûÝïîž¼jAÀ­InSþ}€9H“ÓŽ|?íÁ÷ =_ÊÆŠ­†¥Àue*;¯YEäsYäæB¢Ÿ¿þÄ—£sÙ½½ÙŒ† É«›©ÀYÇq !GÇ¿v̇¹ÑØ®š °Œ‚ÔF¹}q¥b]÷7í·0)Úd›¾ÿð-èº}Pfä£ÖY{4™ÑÂ@}úæôñ2ÛüÔ—ñúåNŒI‚ÁǃcçÁº%£¬UаI³mc±ô˜å¼ÔÆüÈ>é¸xþt9Æ$µý OæVE*õU´Ì‚ç#ž×ˆ•ïûr@l$øPÿrHaaÇ¥ ²›dZ®rè‘ãqI„o¼øT\Ž,tªj2FAxv-LŸp׌p TÄI/ \¥sfí½; jViTƒèú¤o^cpÅü¼ûû»Ïb]”€¢¤<†aþÕœ²“ßÓ˜y“£§9:Œîù+À³€ñà,E žf³6éNˆÄE£KU}Ü^;¶ØnZ¢uß­US4— ѬëbížN¶.Úk¦ØjTÄöº%µªâ i¯VÄÊÝò§™ Èù¸)ùÿG€™òºJ@T x”IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/namespaces.html0000664000175000017500000000535512414127676022422 0ustar00execexec00000000000000 wnckmm: Namespace List
Namespace List
Here is a list of all namespaces with brief descriptions:
oNGlib
\NWnckThis file is part of wnckmm
libwnckmm-1.0-0.1.1/doc/reference/html/a00019.html0000664000175000017500000000410412414127676021104 0ustar00execexec00000000000000 wnckmm: Glib Namespace Reference
Glib Namespace Reference
libwnckmm-1.0-0.1.1/doc/reference/html/functions_func_~.html0000664000175000017500000001102712414127676023654 0ustar00execexec00000000000000 wnckmm: Class Members - Functions
 

- ~ -

libwnckmm-1.0-0.1.1/doc/reference/html/a00020.html0000664000175000017500000010055112414127676021077 0ustar00execexec00000000000000 wnckmm: Wnck Namespace Reference
Wnck Namespace Reference

This file is part of wnckmm. More...

Classes

class  ActionMenu
 This represents an action menu. More...
 
class  Application
 This represents an application. More...
 
class  ClassGroup
 This represents a class group. More...
 
class  Pager
 This represents a pager. More...
 
class  Screen
 This represents a screen. More...
 
class  Selector
 This represents a workspace. More...
 
class  Tasklist
 This represents a tasklist. More...
 
class  Window
 This represents a workspace. More...
 
class  Workspace
 This represents a workspace. More...
 

Enumerations

enum  PagerDisplayMode {
  PAGER_DISPLAY_NAME,
  PAGER_DISPLAY_CONTENT
}
 
enum  WindowType {
  WINDOW_NORMAL,
  WINDOW_DESKTOP,
  WINDOW_DOCK,
  WINDOW_DIALOG,
  WINDOW_TOOLBAR,
  WINDOW_MENU,
  WINDOW_UTILITY,
  WINDOW_SPLASHSCREEN
}
 
enum  WindowState {
  WINDOW_STATE_MINIMIZED = 1 << 0,
  WINDOW_STATE_MAXIMIZED_HORIZONTALLY = 1 << 1,
  WINDOW_STATE_MAXIMIZED_VERTICALLY = 1 << 2,
  WINDOW_STATE_SHADED = 1 << 3,
  WINDOW_STATE_SKIP_PAGER = 1 << 4,
  WINDOW_STATE_SKIP_TASKLIST = 1 << 5,
  WINDOW_STATE_STICKY = 1 << 6,
  WINDOW_STATE_HIDDEN = 1 << 7,
  WINDOW_STATE_FULLSCREEN = 1 << 8,
  WINDOW_STATE_DEMANDS_ATTENTION = 1 << 9,
  WINDOW_STATE_URGENT = 1 << 10,
  WINDOW_STATE_ABOVE = 1 << 11,
  WINDOW_STATE_BELOW = 1 << 12
}
 
enum  WindowActions {
  WINDOW_ACTION_MOVE = 1 << 0,
  WINDOW_ACTION_RESIZE = 1 << 1,
  WINDOW_ACTION_SHADE = 1 << 2,
  WINDOW_ACTION_STICK = 1 << 3,
  WINDOW_ACTION_MAXIMIZE_HORIZONTALLY = 1 << 4,
  WINDOW_ACTION_MAXIMIZE_VERTICALLY = 1 << 5,
  WINDOW_ACTION_CHANGE_WORKSPACE = 1 << 6,
  WINDOW_ACTION_CLOSE = 1 << 7,
  WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY = 1 << 8,
  WINDOW_ACTION_UNMAXIMIZE_VERTICALLY = 1 << 9,
  WINDOW_ACTION_UNSHADE = 1 << 10,
  WINDOW_ACTION_UNSTICK = 1 << 11,
  WINDOW_ACTION_MINIMIZE = 1 << 12,
  WINDOW_ACTION_UNMINIMIZE = 1 << 13,
  WINDOW_ACTION_MAXIMIZE = 1 << 14,
  WINDOW_ACTION_UNMAXIMIZE = 1 << 15,
  WINDOW_ACTION_FULLSCREEN = 1 << 16,
  WINDOW_ACTION_ABOVE = 1 << 17,
  WINDOW_ACTION_BELOW = 1 << 18
}
 
enum  WindowGravity {
  WINDOW_GRAVITY_CURRENT,
  WINDOW_GRAVITY_NORTHWEST,
  WINDOW_GRAVITY_NORTH,
  WINDOW_GRAVITY_NORTHEAST,
  WINDOW_GRAVITY_WEST,
  WINDOW_GRAVITY_CENTER,
  WINDOW_GRAVITY_EAST,
  WINDOW_GRAVITY_SOUTHWEST,
  WINDOW_GRAVITY_SOUTH,
  WINDOW_GRAVITY_SOUTHEAST,
  WINDOW_GRAVITY_STATIC
}
 
enum  WindowMoveResizeMask {
  WINDOW_CHANGE_X = 1 << 0,
  WINDOW_CHANGE_Y = 1 << 1,
  WINDOW_CHANGE_WIDTH = 1 << 2,
  WINDOW_CHANGE_HEIGHT = 1 << 3
}
 
enum  MotionDirection {
  MOTION_UP = -1,
  MOTION_DOWN = -2,
  MOTION_LEFT = -3,
  MOTION_RIGHT = -4
}
 

Functions

WindowState operator| (WindowState lhs, WindowState rhs)
 
WindowState operator& (WindowState lhs, WindowState rhs)
 
WindowState operator^ (WindowState lhs, WindowState rhs)
 
WindowState operator~ (WindowState flags)
 
WindowStateoperator|= (WindowState& lhs, WindowState rhs)
 
WindowStateoperator&= (WindowState& lhs, WindowState rhs)
 
WindowStateoperator^= (WindowState& lhs, WindowState rhs)
 
WindowActions operator| (WindowActions lhs, WindowActions rhs)
 
WindowActions operator& (WindowActions lhs, WindowActions rhs)
 
WindowActions operator^ (WindowActions lhs, WindowActions rhs)
 
WindowActions operator~ (WindowActions flags)
 
WindowActionsoperator|= (WindowActions& lhs, WindowActions rhs)
 
WindowActionsoperator&= (WindowActions& lhs, WindowActions rhs)
 
WindowActionsoperator^= (WindowActions& lhs, WindowActions rhs)
 
WindowMoveResizeMask operator| (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask operator& (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask operator^ (WindowMoveResizeMask lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMask operator~ (WindowMoveResizeMask flags)
 
WindowMoveResizeMaskoperator|= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMaskoperator&= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 
WindowMoveResizeMaskoperator^= (WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs)
 

Detailed Description

This file is part of wnckmm.

Copyright (c) 2013 Povilas Kanapickas povil.nosp@m.as@r.nosp@m.adix..nosp@m.lt

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library. If not, see http://www.gnu.org/licenses/.

libwnckmm-1.0-0.1.1/doc/reference/html/a00009.html0000664000175000017500000006020212414127676021104 0ustar00execexec00000000000000 wnckmm: Wnck::Workspace Class Reference

This represents a workspace. More...

Inherits Object.

Public Member Functions

virtual ~Workspace ()
 
WnckWorkspace* gobj ()
 Provides access to the underlying C GObject. More...
 
const WnckWorkspace* gobj () const
 Provides access to the underlying C GObject. More...
 
Screenget_screen () const
 
int get_number () const
 
std::string get_name () const
 
void set_name (const std::string& name) const
 
int get_width () const
 
int get_height () const
 
int get_viewport_x () const
 
int get_viewport_y () const
 
bool is_virtual () const
 
int get_layout_row () const
 
int get_layout_column () const
 
Workspaceget_neighbor (MotionDirection direction) const
 
void activate (guint32 timestamp)
 
Glib::SignalProxy0< void > signal_name_changed ()
 

Static Public Member Functions

static GType get_type () G_GNUC_CONST
 Get the GType for this class, for use with the underlying GObject type system. More...
 

Protected Member Functions

 Workspace ()
 
virtual void on_name_changed ()
 This is a default handler for the signal signal_name_changed(). More...
 

Related Functions

(Note that these are not member functions.)

Wnck::Workspacewrap (WnckWorkspace* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a workspace.

Constructor & Destructor Documentation

virtual Wnck::Workspace::~Workspace ( )
virtual
Wnck::Workspace::Workspace ( )
protected

Member Function Documentation

void Wnck::Workspace::activate ( guint32  timestamp)
int Wnck::Workspace::get_height ( ) const
int Wnck::Workspace::get_layout_column ( ) const
int Wnck::Workspace::get_layout_row ( ) const
std::string Wnck::Workspace::get_name ( ) const
Workspace* Wnck::Workspace::get_neighbor ( MotionDirection  direction) const
int Wnck::Workspace::get_number ( ) const
Screen* Wnck::Workspace::get_screen ( ) const
static GType Wnck::Workspace::get_type ( )
static

Get the GType for this class, for use with the underlying GObject type system.

int Wnck::Workspace::get_viewport_x ( ) const
int Wnck::Workspace::get_viewport_y ( ) const
int Wnck::Workspace::get_width ( ) const
WnckWorkspace* Wnck::Workspace::gobj ( )
inline

Provides access to the underlying C GObject.

const WnckWorkspace* Wnck::Workspace::gobj ( ) const
inline

Provides access to the underlying C GObject.

bool Wnck::Workspace::is_virtual ( ) const
virtual void Wnck::Workspace::on_name_changed ( )
protectedvirtual

This is a default handler for the signal signal_name_changed().

void Wnck::Workspace::set_name ( const std::string &  name) const
Glib::SignalProxy0< void > Wnck::Workspace::signal_name_changed ( )
Slot Prototype:
void on_my_name_changed()

Friends And Related Function Documentation

Wnck::Workspace* wrap ( WnckWorkspace *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/workspace.h
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2lastnode.png0000664000175000017500000000012612414127675022524 0ustar00execexec00000000000000‰PNG  IHDRɪ|IDATxíݱðøScOx@ –¨y}IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/dir_0c234b14f860cd164b3c695e0b5ca907.html0000664000175000017500000001106312414127676025416 0ustar00execexec00000000000000 wnckmm: /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm Directory Reference
wnckmm Directory Reference

Files

file  action-menu.h
 
file  application.h
 
file  class-group.h
 
file  pager.h
 
file  screen.h
 
file  selector.h
 
file  tasklist.h
 
file  window.h
 
file  workspace.h
 
libwnckmm-1.0-0.1.1/doc/reference/html/ftv2pnode.png0000664000175000017500000000034512414127675022023 0ustar00execexec00000000000000‰PNG  IHDRɪ|¬IDATxí=QF‘Ø¥D«ÔkÄ:‰F©PK؃=V@§Õ³ Õ8SHxñÌ0bnrróŠ{ò½¿¾’$ ÀÏTŠP  ö¼X¬OÛd6êìòð"°²S´±O¥B€(¡àQé)š+YĈ ÒªËRÉÐ>VtÉsˆm9(ê„䜥k‚-@ȧ-Ü$ó b Ò[he ¿Kp-ôl|CùÿApRG'rÍ­aIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/ftv2mnode.png0000664000175000017500000000036612414127675022023 0ustar00execexec00000000000000‰PNG  IHDRɪ|½IDATxíÝ!NAÅñ¤‡à\ ÷à Um@`Ô5iÒ`ëh ‚ÅW7] b§ÝˆŠ&oföÍd¾YÔ4 üšcø ‡€´‹Åòù3v=¼]†§µ\B… I¿‹=B·™B¡®;¸k´µ W°ÍN@vyÍÑÖ4ãß÷]ÈâYìã§|M}]ÔÚx6a }ôdׇØYüú¨>¤||5?Ó>|žB"¡î'¡IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/functions_~.html0000664000175000017500000001104412414127676022640 0ustar00execexec00000000000000 wnckmm: Class Members
Here is a list of all class members with links to the classes they belong to:

- ~ -

libwnckmm-1.0-0.1.1/doc/reference/html/index.html0000664000175000017500000000347512414127676021413 0ustar00execexec00000000000000 wnckmm: Main Page
wnckmm Documentation
libwnckmm-1.0-0.1.1/doc/reference/html/bc_s.png0000664000175000017500000000124412414127675021021 0ustar00execexec00000000000000‰PNG  IHDR€_ kIDATxíËkQÆÏ¹É̤I&“¦mš&156*nÄ…”ܸR,4 +Hµ(U­b”ª1‚ŠˆJ.º(E·mßúhëJmKS'C›(‚èäÑ…¤ï &äÖþ ‡ïrÎåü3gö(z÷ýÒ&_9ó}’ÕŸ@‰mÚu ` Øh`ñ÷Ô¯  „ú&·ññ×Ù~“½—Üò‡ÎÝÑM4¸%‰3²§?Êêh)€ÿù™\ÄYi>Jb @gûßiÞˆú²Ñkg§ãê\è½­šEUæv+?E€î"pæÖÛB\ƒY&ðØó$vM+ê’Dn¼)}òþ:§Xoâ ƒ3ŠÚ¯'¯¿.‚fÁ0ìuŠ9òLýj€f6¸%«3Gf”Ô#Ôsm(,ùÃk*Ê’³Jª…¯¼JË¢o䆔¼u_~ °r]%%mnu]z°r5[ÍÆ°«Úò•Xeµ’†Iù<ÈèÐÅg@IÔÚÞàµë3‚:/<JÇ’ÐQ) ñ¹…tÚß÷(Mû\63éCgl!ýí;ÿ¸4Ùhâñ=÷Zë29­w’ÝÒ´·ˆV;ÊL3ƒj&7©·º½÷a!I†)ëë$-öÇÓú³›‹7tIV¾VàñÔübf¨8¡ÈƒB<﫵imnÿœÈ‡„ lߣù‡ÛD —#É5“­'Æ4?쬲øM’™›°»g¬‚|5Åçµ½GNdÓÐr|ô”Ã&„ì"7+'³@ 5‡G➑Džâɬ^;õã–.3Òr"ý_R³¿Â@²oI¾å$IEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/html/a00004.html0000664000175000017500000003467212414127676021113 0ustar00execexec00000000000000 wnckmm: Wnck::Pager Class Reference

This represents a pager. More...

Inherits Widget.

Public Member Functions

virtual ~Pager ()
 
WnckPager* gobj ()
 Provides access to the underlying C GtkObject. More...
 
const WnckPager* gobj () const
 Provides access to the underlying C GtkObject. More...
 
 Pager (const Screen* screen)
 Creates an action menu for a screen. More...
 
bool set_orientation (Gtk::Orientation orientation)
 
bool set_row_count (int count)
 
void set_display_mode (PagerDisplayMode mode)
 
void set_show_all (bool show_all)
 
void set_shadow_type (Gtk::ShadowType shadow_type)
 

Related Functions

(Note that these are not member functions.)

Wnck::Pagerwrap (WnckPager* object, bool take_copy=false)
 A Glib::wrap() method for this object. More...
 

Detailed Description

This represents a pager.

Constructor & Destructor Documentation

virtual Wnck::Pager::~Pager ( )
virtual
Wnck::Pager::Pager ( const Screen screen)
explicit

Creates an action menu for a screen.

Member Function Documentation

WnckPager* Wnck::Pager::gobj ( )
inline

Provides access to the underlying C GtkObject.

const WnckPager* Wnck::Pager::gobj ( ) const
inline

Provides access to the underlying C GtkObject.

void Wnck::Pager::set_display_mode ( PagerDisplayMode  mode)
bool Wnck::Pager::set_orientation ( Gtk::Orientation  orientation)
bool Wnck::Pager::set_row_count ( int  count)
void Wnck::Pager::set_shadow_type ( Gtk::ShadowType  shadow_type)
void Wnck::Pager::set_show_all ( bool  show_all)

Friends And Related Function Documentation

Wnck::Pager* wrap ( WnckPager *  object,
bool  take_copy = false 
)
related

A Glib::wrap() method for this object.

Parameters
objectThe C instance.
take_copyFalse if the result should take ownership of the C instance. True if it should take a new copy or ref.
Returns
A C++ instance that wraps this C instance.

The documentation for this class was generated from the following file:
  • /home/exec/code/my/checkouts/libwnckmm/wnck/wnckmm/pager.h
libwnckmm-1.0-0.1.1/doc/reference/html/nav_h.png0000664000175000017500000000014212414127675021202 0ustar00execexec00000000000000‰PNG  IHDR ,é@)IDATxíÝA @BQ­³šÛ›Ð¢Žáà) )ëý éaÅèÜ¿Æo‡RlÐßIEND®B`‚libwnckmm-1.0-0.1.1/doc/reference/Doxyfile.in0000644000175000017500000002470612257350437020561 0ustar00execexec00000000000000# Doxyfile 1.6.1 # @configure_input@ #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = @PACKAGE_NAME@ PROJECT_NUMBER = @PACKAGE_VERSION@ OUTPUT_DIRECTORY = reference CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = "@abs_top_builddir@/wnck/" \ "@abs_top_srcdir@/wnck/" \ "@abs_top_builddir@/" \ "@abs_top_srcdir@/" STRIP_FROM_INC_PATH = "@abs_top_builddir@/wnck/" \ "@abs_top_srcdir@/wnck/" \ "@abs_top_builddir@/" \ "@abs_top_srcdir@/" SHORT_NAMES = YES JAVADOC_AUTOBRIEF = YES QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = YES SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 4 ALIASES = "newin{2}=\xrefitem since_\1_\2 \"Since @PACKAGE_NAME@ \1.\2\" \"New API in @PACKAGE_NAME@ \1.\2\"" OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO EXTENSION_MAPPING = BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES TYPEDEF_HIDES_STRUCT = NO SYMBOL_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = NO EXTRACT_STATIC = NO EXTRACT_LOCAL_CLASSES = NO EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = YES HIDE_FRIEND_COMPOUNDS = YES HIDE_IN_BODY_DOCS = YES INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = NO INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_MEMBERS_CTORS_1ST = YES SORT_GROUP_NAMES = YES SORT_BY_SCOPE_NAME = YES GENERATE_TODOLIST = YES GENERATE_TESTLIST = NO GENERATE_BUGLIST = NO GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 2 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO SHOW_FILES = NO SHOW_NAMESPACES = YES FILE_VERSION_FILTER = LAYOUT_FILE = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = reference/doxygen.log #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = INPUT_ENCODING = UTF-8 FILE_PATTERNS = RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = EXCLUDE_SYMBOLS = _* \ adaptor_trait \ basic_filebuf \ basic_streambuf \ binary_function \ char_traits \ internal \ pair \ unary_function EXAMPLE_PATH = "@abs_top_srcdir@/demos" EXAMPLE_PATTERNS = *.cc \ *.h EXAMPLE_RECURSIVE = YES IMAGE_PATH = "@abs_top_srcdir@/docs/reference/images/stock/16" \ "@abs_top_srcdir@/docs/reference/images/stock/20" \ "@abs_top_srcdir@/docs/reference/images/stock/24" \ "@abs_top_srcdir@/docs/reference/images/stock/32" \ "@abs_top_srcdir@/docs/reference/images/stock/48" \ "@abs_top_srcdir@/docs/reference/images/widgets" INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = NO INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 5 IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = HTML_FOOTER = HTML_STYLESHEET = "@MMDOCTOOLDIR@/doxygen.css" HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = NO GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project GENERATE_HTMLHELP = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO CHM_INDEX_ENCODING = BINARY_TOC = NO TOC_EXPAND = NO GENERATE_QHP = NO QCH_FILE = QHP_NAMESPACE = QHP_VIRTUAL_FOLDER = doc QHP_CUST_FILTER_NAME = QHP_CUST_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS = QHG_LOCATION = DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 1 GENERATE_TREEVIEW = NONE USE_INLINE_TREES = NO TREEVIEW_WIDTH = 250 FORMULA_FONTSIZE = 10 SEARCHENGINE = NO #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = YES USE_PDFLATEX = YES LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO LATEX_SOURCE_CODE = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = YES EXPAND_ONLY_PREDEF = YES SEARCH_INCLUDES = YES INCLUDE_PATH = "@abs_top_builddir@/wnck" \ "@abs_top_srcdir@/wnck" \ INCLUDE_FILE_PATTERNS = *.h PREDEFINED = __cplusplus \ DOXYGEN_SHOULD_SKIP_THIS EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = @DOXYGEN_TAGFILES@ GENERATE_TAGFILE = "reference/@PACKAGE_TARNAME@.tag" ALLEXTERNALS = NO EXTERNAL_GROUPS = NO PERL_PATH = @PERL@ #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = YES MSCGEN_PATH = HIDE_UNDOC_RELATIONS = NO HAVE_DOT = YES DOT_FONTNAME = FreeSans DOT_FONTSIZE = 10 DOT_FONTPATH = CLASS_GRAPH = YES COLLABORATION_GRAPH = NO GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = YES INCLUDE_GRAPH = NO INCLUDED_BY_GRAPH = NO CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = NO DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 DOT_TRANSPARENT = NO DOT_MULTI_TARGETS = YES GENERATE_LEGEND = YES DOT_CLEANUP = YES libwnckmm-1.0-0.1.1/doc/reference/libwnckmm-1.0.devhelp20000664000175000017500000012045012414127676022355 0ustar00execexec00000000000000 libwnckmm-1.0-0.1.1/doc/doxygen.css0000644000175000017500000000641112414017001016646 0ustar00execexec00000000000000/* GNOME C++ bindings Doxygen style */ html, body { background: #FFFFFF; color: #222222; margin: 0; } body { font: normal 90%/150% sans-serif; padding: 1.5em; min-width: 28em; } table { font-size: inherit; } img { border-style: none; } address img { vertical-align: middle; } h1 { font-size: 150%; line-height: 120%; text-align: center; } h2 { font-size: 120%; } h3 { font-size: 100%; } h1 + h3 { text-align: center; } .navpath { display: none; } caption { font-weight: bold; } p, dl { margin: 0.75em 0; } .center { text-align: center; } div.qindex { width: 100%; line-height: 140%; background-color: #E8EEF2; border: 1px solid #84B0C7; text-align: center; margin: 0.2em; padding: 0.2em; } a { color: #153788; font-weight: normal; text-decoration: none; } .contents a:visited { color: #1B77C5; } a:hover { text-decoration: underline; } a.el, a.qindex { font-weight: bold; } dl.el { margin-left: -1.5em; } code, .fragment { font-family: monospace, fixed; } pre.fragment { background-color: #EEEEFF; border: 1px solid #AAAAFF; padding: 0.5em; margin: 0.375em 0.75em 0.375em 0.2em; } div.ah { background-color: #000000; color: #FFFFFF; font-weight: bold; margin: 0.2em 0; } .indexkey, .indexvalue { background-color: #E8EEF2; border: 1px solid #CCCCCC; margin: 0.2em 0; padding: 0.2em 0.75em; } .indexkey { font-weight: bold; } .memlist { background-color: #F0F0F0; } span.keyword { color: #008000; } span.keywordtype { color: #604020; } span.keywordflow { color: #E08000; } span.comment { color: #800000; } span.preprocessor { color: #806020; } span.stringliteral { color: #002080; } span.charliteral { color: #008080; } .tiny { font-size: 80%; } hr { height: 0; border: none; border-top: 1px solid #666666; } .mdescLeft, .mdescRight, .memItemLeft, .memItemRight, .memTemplItemLeft, .memTemplItemRight, .memTemplParams { background-color: #FAFAFA; border: none; margin: 0.375em; padding: 0.125em 0 0 0.75em; } .mdescLeft, .mdescRight { padding: 0 0.75em 0.375em; color: #555555; } .memItemLeft, .memItemRight, .memTemplParams { border-top: 1px solid #CCCCCC; } .memTemplParams { color: #606060; } .memtemplate { color: #606060; font-size: 90%; font-weight: normal; margin-left: 0.2em; } .memnav { background-color: #E8EEF2; border: 1px solid #84B0C7; text-align: center; margin: 0.2em 1em 0.2em 0; padding: 0.2em; } .memitem { margin: 0.5em 0; padding: 0; } .memname { white-space: nowrap; font-weight: bold; line-height: 120%; } .memproto, .memdoc { border: 1px solid #84B0C7; } .memproto { padding: 0; background-color: #D5E1E8; font-weight: bold; -webkit-border-top-left-radius: 1ex; -webkit-border-top-right-radius: 1ex; -moz-border-radius-topleft: 1ex; -moz-border-radius-topright: 1ex; } .memdoc { padding: 0.2em 0.5em; background-color: #EEF3F5; border-top-width: 0; -webkit-border-bottom-left-radius: 1ex; -webkit-border-bottom-right-radius: 1ex; -moz-border-radius-bottomleft: 1ex; -moz-border-radius-bottomright: 1ex; } .paramkey { text-align: right; } .paramtype { white-space: nowrap; } .paramname { color: #602020; white-space: nowrap; } .paramname em { font-style: normal; } libwnckmm-1.0-0.1.1/doc/Makefile.in0000664000175000017500000006107312414127605016547 0ustar00execexec00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/wnck/src/filelist.am \ $(top_srcdir)/doc/doc-reference.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(dist_docimages_DATA) \ $(dist_noinst_DATA) $(dist_reference_DATA) subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(docimagesdir)" \ "$(DESTDIR)$(referencedir)" DATA = $(dist_docimages_DATA) $(dist_noinst_DATA) \ $(dist_reference_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOCINSTALL_FLAGS = @DOCINSTALL_FLAGS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DOXYGEN_TAGFILES = @DOXYGEN_TAGFILES@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GMMPROC_DIR = @GMMPROC_DIR@ GMMPROC_EXTRA_M4_DIR = @GMMPROC_EXTRA_M4_DIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBWNCKMM_SO_VERSION = @LIBWNCKMM_SO_VERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MMDOCTOOLDIR = @MMDOCTOOLDIR@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WNCKMM_API_VERSION = @WNCKMM_API_VERSION@ WNCKMM_CFLAGS = @WNCKMM_CFLAGS@ WNCKMM_LIBS = @WNCKMM_LIBS@ WNCKMM_MAJOR_VERSION = @WNCKMM_MAJOR_VERSION@ WNCKMM_MICRO_VERSION = @WNCKMM_MICRO_VERSION@ WNCKMM_MINOR_VERSION = @WNCKMM_MINOR_VERSION@ WNCKMM_MODULES = @WNCKMM_MODULES@ WNCKMM_MODULE_NAME = @WNCKMM_MODULE_NAME@ WNCKMM_VERSION = @WNCKMM_VERSION@ WNCK_CFLAGS = @WNCK_CFLAGS@ WNCK_LIBS = @WNCK_LIBS@ XSLTPROC = @XSLTPROC@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ wnckmm_files_defs = \ wnck.defs \ wnck_enums.defs \ wnck_methods.defs \ wnck_signals.defs wnckmm_files_hg = \ action-menu.hg \ application.hg \ class-group.hg \ pager.hg \ screen.hg \ selector.hg \ tasklist.hg \ window.hg \ workspace.hg wnckmm_files_ccg = $(wnckmm_files_hg:.hg=.ccg) book_name = $(PACKAGE_TARNAME) doc_input = $(addprefix $(top_srcdir)/wnck/wnckmm/,$(wnckmm_files_hg:.hg=.h)) docimagesdir = $(libdocdir)/images dist_docimages_DATA = # Function: $(call vpath_listall,PATTERN ...) # Get all filenames which match a PATTERN from the list. Look for files # relative to either the current directory or $(srcdir). Strip $(srcdir)/ # again before returning and remove any duplicates. vpath_srclist = $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(1)))) vpath_listall = $(sort $(wildcard $(1)) $(if $(srcdir:.=),$(vpath_srclist))) # Installation directories. libdocdir = $(datarootdir)/doc/$(book_name) referencedir = $(libdocdir)/reference htmlrefdir = $(referencedir)/html devhelpdir = $(datadir)/devhelp/books/$(book_name) @ENABLE_DOCUMENTATION_FALSE@doc_inst_targets = @ENABLE_DOCUMENTATION_TRUE@doc_inst_targets = install-htmlref install-devhelp @ENABLE_DOCUMENTATION_FALSE@doc_inst_files = @ENABLE_DOCUMENTATION_TRUE@doc_inst_files = $(doxytagfile) @ENABLE_DOCUMENTATION_FALSE@doc_dist_files = @ENABLE_DOCUMENTATION_TRUE@doc_dist_files = $(devhelpfile) $(call vpath_listall,$(htmlref_patterns)) dist_reference_DATA = $(strip $(doc_inst_files)) # These are copied here by mm-common: dist_noinst_DATA = $(strip $(doc_dist_files)) doc-install.pl \ doc-postprocess.pl tagfile-to-devhelp2.xsl doxygen.css DISTCLEANFILES = $(doc_outdir)/doxygen.log MAINTAINERCLEANFILES = $(doxytagfile) $(devhelpfile) $(doc_outdir)/html/* # The generic bit of the doc-install.pl command line. doc_install_cmd = $(doc_install) --verbose --mode=0644 # Transform $(datarootdir) into a URI to match MM_ARG_WITH_TAGFILE_DOC(). datarootdir_esc = $(subst $(subst ,, ),%20,$(subst \,/,$(datarootdir))) docdir_base_uri = file:///$(patsubst /%,%,$(datarootdir_esc:/=))/doc # The command and options used to install the files from the HTML reference # documentation. The $(subst) magic translates external tag references from # absolute to relative paths if the destination is on the local file system # and installed under the same prefix as the package being built. htmlref_relinst = $(subst @$(docdir_base_uri)/,@../../../,$(DOCINSTALL_FLAGS)) htmlref_install = $(doc_install_cmd) $(htmlref_relinst) # The command and options used to install the Devhelp file. devhelp_install = $(doc_install_cmd) --book-base='$(htmlrefdir:/=)' # Helper variables to replicate each pattern with a $(srcdir)/ prefix. # Also add quoting to prevent the shell from expanding the patterns. htmlref_patterns_dup = $(foreach item,$(htmlref_patterns),'$(item)' '$(srcdir)/$(item)') htmlref_patterns_quote = $(patsubst %,'%',$(htmlref_patterns)) htmlref_patterns_vpath = $(if $(srcdir:.=),$(htmlref_patterns_dup),$(htmlref_patterns_quote)) # Expand to a list of -name 'PATTERN' arguments for use with 'find'. htmlref_find_patterns = $(patsubst %,-name '%' -o,$(notdir $(htmlref_patterns))) -false # The parameters to the Doxygen-to-Devhelp XSLT script dh_xsl_params = --stringparam book_title '$(book_title)' \ --stringparam book_name '$(book_name)' \ --stringparam book_base html # Generated configuration files which, when updated, should cause the # reference documentation to be rebuilt. doc_config_deps = $(CONFIG_HEADER) $(srcdir)/$(doc_config).in $(srcdir)/Makefile.in @MAINTAINER_MODE_FALSE@doc_dependencies = # Regenerate the documentation automatically only in maintainer mode. # Depend on the generated configuration header files to trigger a rebuild # if a configuration value changed. The configuration header files only # have their timestamp modified when the content actually changed, which # is not the case for any other files generated by configure. @MAINTAINER_MODE_TRUE@doc_dependencies = $(doc_config_deps) $(doc_input) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/wnck/src/filelist.am $(top_srcdir)/doc/doc-reference.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/wnck/src/filelist.am $(top_srcdir)/doc/doc-reference.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-dist_docimagesDATA: $(dist_docimages_DATA) @$(NORMAL_INSTALL) @list='$(dist_docimages_DATA)'; test -n "$(docimagesdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(docimagesdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(docimagesdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docimagesdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(docimagesdir)" || exit $$?; \ done uninstall-dist_docimagesDATA: @$(NORMAL_UNINSTALL) @list='$(dist_docimages_DATA)'; test -n "$(docimagesdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(docimagesdir)'; $(am__uninstall_files_from_dir) install-dist_referenceDATA: $(dist_reference_DATA) @$(NORMAL_INSTALL) @list='$(dist_reference_DATA)'; test -n "$(referencedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(referencedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(referencedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(referencedir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(referencedir)" || exit $$?; \ done uninstall-dist_referenceDATA: @$(NORMAL_UNINSTALL) @list='$(dist_reference_DATA)'; test -n "$(referencedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(referencedir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) all-local installdirs: for dir in "$(DESTDIR)$(docimagesdir)" "$(DESTDIR)$(referencedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-dist_docimagesDATA \ install-dist_referenceDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_docimagesDATA \ uninstall-dist_referenceDATA uninstall-local .MAKE: install-am install-strip .PHONY: all all-am all-local check check-am clean clean-generic \ clean-libtool cscopelist-am ctags-am distclean \ distclean-generic distclean-libtool distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-local install-dist_docimagesDATA \ install-dist_referenceDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am uninstall-dist_docimagesDATA \ uninstall-dist_referenceDATA uninstall-local # The name of the sub-directory where the generated documentation # will be placed. doc_outdir ?= reference # The name of the Doxygen configuration file. doc_config ?= $(doc_outdir)/Doxyfile # The base URL where the online documentation for C++ binding modules # is located, including the trailing slash. pubdocbase ?= http://library.gnome.org/devel/ # The URL of the module's online HTML reference documentation, which # may or may not end in a trailing slash. htmlrefpub ?= $(pubdocbase)$(PACKAGE_TARNAME)/unstable/ # The title of the generated Devhelp book. book_title ?= $(PACKAGE_NAME) Reference Manual # A list of wildcard patterns matching the files from the HTML directory # generated by Doxygen which should be distributed and installed. htmlref_patterns ?= $(addprefix $(doc_outdir)/html/*.,css gif html png) # Locations of utilities shipped with glibmm. Made overridable # in case the installed utilities cannot be used for some reason. doc_postprocess ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-postprocess.pl" doc_install ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-install.pl" tagfile_to_devhelp2 ?= "$(MMDOCTOOLDIR)/tagfile-to-devhelp2.xsl" # Names of the main output files. doxytagfile ?= $(doc_outdir)/$(book_name).tag devhelpfile ?= $(doc_outdir)/$(book_name).devhelp2 # Explicitly depend on the files to be distributed or installed. all-local: $(doc_inst_files) $(doc_dist_files) # Hook up custom rules for translating references to external documentation # to the actual location at install time. install-data-local: $(doc_inst_targets) # Hook up corresponding custom uninstall rules. uninstall-local: $(addprefix un,$(doc_inst_targets)) # Install the HTML reference documentation files with just one invocation # of doc-install.pl to speed up the build process. Make use of the --glob # option, which tells it to perform filename globbing itself, like 'find'. # This helps to avoid excessively long command lines, as some platforms # have rather restrictive limits. install-htmlref: $(doc_outdir)/html/index.html @$(NORMAL_INSTALL) $(MKDIR_P) '$(DESTDIR)$(htmlrefdir)' $(htmlref_install) -t '$(DESTDIR)$(htmlrefdir)' --glob -- $(htmlref_patterns_vpath) # Delete files from the html installation directory. Avoid recursive # directory removal, and apply the same wildcard pattern as was used to # select files for installation. uninstall-htmlref: @$(NORMAL_UNINSTALL) (cd '$(DESTDIR)$(htmlrefdir)' 2>/dev/null || exit 0; \ find . -type f '(' $(htmlref_find_patterns) ')' -exec rm -f '{}' '+') -test ! -r '$(DESTDIR)$(htmlrefdir)' || rmdir '$(DESTDIR)$(htmlrefdir)' # Install the Devhelp file, translating the base path on the fly. install-devhelp: $(devhelpfile) @$(NORMAL_INSTALL) $(MKDIR_P) '$(DESTDIR)$(devhelpdir)' $(devhelp_install) -t '$(DESTDIR)$(devhelpdir)' -- $^ # Remove the installed Devhelp file and directory. uninstall-devhelp: @$(NORMAL_UNINSTALL) rm -f '$(DESTDIR)$(devhelpdir)/$(notdir $(devhelpfile))' -test ! -r '$(DESTDIR)$(devhelpdir)' || rmdir '$(DESTDIR)$(devhelpdir)' # Regenerate the Doxygen configuration file automatically. In the # top-level build directory Automake already takes care of this. ifneq ($(subdir),.) $(doc_config): $(srcdir)/$(doc_config).in $(top_builddir)/config.status $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ endif # Make sure that the documentation will always have been generated before # executing commands of a rule that depends on files in $(doc_outdir)/html/. $(doc_outdir)/html/%: | $(doxytagfile) # Run Doxygen to build the reference documentation. The generated tag file # also functions as time stamp target for the documentation as a whole. $(doxytagfile): $(doc_dependencies) | $(doc_config) -$(AM_V_at)rm -f $@ -$(AM_V_at)rm -fr $(doc_outdir)/html $(AM_V_GEN)(echo '@INCLUDE =' $(doc_config) && echo 'INPUT =' $(doc_input)) | $(DOXYGEN) - $(AM_V_at)$(doc_postprocess) '$(doc_outdir)/html/*.html' # Run XSL transformation to generate a Devhelp book from a Doxygen tag file. %.devhelp2: %.tag $(AM_V_GEN)$(XSLTPROC) $(dh_xsl_params) -o $@ $(tagfile_to_devhelp2) $< .PHONY: install-htmlref uninstall-htmlref install-devhelp uninstall-devhelp # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libwnckmm-1.0-0.1.1/doc/tagfile-to-devhelp2.xsl0000644000175000017500000001425412414017001020755 0ustar00execexec00000000000000 libwnckmm-1.0-0.1.1/COPYING0000644000175000017500000006363112257335646015003 0ustar00execexec00000000000000 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it! libwnckmm-1.0-0.1.1/config.h.in0000664000175000017500000000330412414127604015750 0ustar00execexec00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Major version number of wnckmm. */ #undef WNCKMM_MAJOR_VERSION /* Micro version number of wnckmm. */ #undef WNCKMM_MICRO_VERSION /* Minor version number of wnckmm. */ #undef WNCKMM_MINOR_VERSION libwnckmm-1.0-0.1.1/Makefile.in0000664000175000017500000007411512414127605016003 0ustar00execexec00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in $(top_srcdir)/wnck/wnckmm.pc.in \ $(top_srcdir)/doc/reference/Doxyfile.in $(dist_noinst_SCRIPTS) \ $(dist_noinst_DATA) $(wnckmm_include_HEADERS) COPYING INSTALL \ m4/compile m4/config.guess m4/config.sub m4/depcomp \ m4/install-sh m4/missing m4/ltmain.sh $(top_srcdir)/m4/compile \ $(top_srcdir)/m4/config.guess $(top_srcdir)/m4/config.sub \ $(top_srcdir)/m4/install-sh $(top_srcdir)/m4/ltmain.sh \ $(top_srcdir)/m4/missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = wnck/${WNCKMM_MODULE_NAME}.pc \ doc/reference/Doxyfile CONFIG_CLEAN_VPATH_FILES = SCRIPTS = $(dist_noinst_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(pkgconfigdir)" \ "$(DESTDIR)$(wnckmm_includedir)" DATA = $(dist_noinst_DATA) $(pkgconfig_DATA) HEADERS = $(wnckmm_include_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = tools wnck/src wnck/wnckmm doc DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOCINSTALL_FLAGS = @DOCINSTALL_FLAGS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DOXYGEN_TAGFILES = @DOXYGEN_TAGFILES@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GMMPROC_DIR = @GMMPROC_DIR@ GMMPROC_EXTRA_M4_DIR = @GMMPROC_EXTRA_M4_DIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBWNCKMM_SO_VERSION = @LIBWNCKMM_SO_VERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MMDOCTOOLDIR = @MMDOCTOOLDIR@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WNCKMM_API_VERSION = @WNCKMM_API_VERSION@ WNCKMM_CFLAGS = @WNCKMM_CFLAGS@ WNCKMM_LIBS = @WNCKMM_LIBS@ WNCKMM_MAJOR_VERSION = @WNCKMM_MAJOR_VERSION@ WNCKMM_MICRO_VERSION = @WNCKMM_MICRO_VERSION@ WNCKMM_MINOR_VERSION = @WNCKMM_MINOR_VERSION@ WNCKMM_MODULES = @WNCKMM_MODULES@ WNCKMM_MODULE_NAME = @WNCKMM_MODULE_NAME@ WNCKMM_VERSION = @WNCKMM_VERSION@ WNCK_CFLAGS = @WNCK_CFLAGS@ WNCK_LIBS = @WNCK_LIBS@ XSLTPROC = @XSLTPROC@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} DISTCHECK_CONFIGURE_FLAGS = --enable-warnings=fatal @MAINTAINER_MODE_FALSE@src_subdirs = @MAINTAINER_MODE_TRUE@src_subdirs = tools wnck/src @ENABLE_DOCUMENTATION_FALSE@doc_subdirs = @ENABLE_DOCUMENTATION_TRUE@doc_subdirs = doc SUBDIRS = $(src_subdirs) wnck/wnckmm $(doc_subdirs) wnckmm_includedir = $(includedir)/$(WNCKMM_MODULE_NAME) wnckmm_include_HEADERS = wnck/wnckmm.h wnckmm_libincludedir = $(libdir)/$(WNCKMM_MODULE_NAME)/include pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = wnck/$(WNCKMM_MODULE_NAME).pc text_files = README.md dist_noinst_DATA = $(text_files) dist_noinst_SCRIPTS = autogen.sh all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 wnck/${WNCKMM_MODULE_NAME}.pc: $(top_builddir)/config.status $(top_srcdir)/wnck/wnckmm.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ doc/reference/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/reference/Doxyfile.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) install-wnckmm_includeHEADERS: $(wnckmm_include_HEADERS) @$(NORMAL_INSTALL) @list='$(wnckmm_include_HEADERS)'; test -n "$(wnckmm_includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(wnckmm_includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(wnckmm_includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(wnckmm_includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(wnckmm_includedir)" || exit $$?; \ done uninstall-wnckmm_includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(wnckmm_include_HEADERS)'; test -n "$(wnckmm_includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(wnckmm_includedir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(SCRIPTS) $(DATA) $(HEADERS) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(wnckmm_includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-wnckmm_includeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-pkgconfigDATA uninstall-wnckmm_includeHEADERS .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ dist-xz dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-pkgconfigDATA \ install-ps install-ps-am install-strip \ install-wnckmm_includeHEADERS installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-pkgconfigDATA \ uninstall-wnckmm_includeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libwnckmm-1.0-0.1.1/README.md0000644000175000017500000000036212257336415015212 0ustar00execexec00000000000000 Overview -------- This library is a gmmproc-based wrapper around the WNCK library. Building -------- In order to build from git, you must enable maintainer mode during the configure step, for example: ./configure --enable-maintainer-mode libwnckmm-1.0-0.1.1/aclocal.m40000664000175000017500000016361312414127603015576 0ustar00execexec00000000000000# generated automatically by aclocal 1.14.1 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) #serial 20090814 AC_DEFUN([_MM_PRE_INIT], [m4_pattern_forbid([^_?MM_])]) m4_define([_MM_PREREQ], [dnl m4_if(m4_quote(m4_version_compare([$2], [$3])), [-1], [m4_fatal([$4 requires $1 $3 (version $2 is installed)])])[]dnl ]) AC_DEFUN([MM_PREREQ], [dnl m4_assert([$# >= 1])[]dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl _MM_PREREQ([mm-common], [0.9.6], [$1], m4_defn([AC_PACKAGE_NAME]))[]dnl ]) #serial 20110327 m4_define([_MM_CONFIG_DOCTOOL_DIR], [dnl AC_PROVIDE([$0])[]dnl AC_REQUIRE([PKG_PROG_PKG_CONFIG])[]dnl dnl AC_MSG_CHECKING([location of documentation utilities]) AS_IF([test "x$MMDOCTOOLDIR" = x], [ MMDOCTOOLDIR=`$PKG_CONFIG --variable=doctooldir mm-common-util 2>&AS_MESSAGE_LOG_FD` AS_IF([test "[$]?" -ne 0], [AC_MSG_ERROR([[not found The required module mm-common-util could not be found on this system. If you are running a binary distribution and the mm-common package is installed, make sure that any separate development package for mm-common is installed as well. If you built mm-common yourself, it may be necessary to adjust the PKG_CONFIG_PATH environment variable for pkg-config to find it. ]])]) ]) AC_MSG_RESULT([$MMDOCTOOLDIR])[]dnl ]) AC_DEFUN([MM_CONFIG_DOCTOOL_DIR], [dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([MM_CHECK_GNU_MAKE])[]dnl m4_ifval([$1], [MMDOCTOOLDIR='[$]{top_srcdir}/$1'], [AC_REQUIRE([_MM_CONFIG_DOCTOOL_DIR])]) AM_CONDITIONAL([DIST_DOCTOOLS], [test 'x$1' != 'x'])dnl AC_SUBST([MMDOCTOOLDIR])[]dnl ]) m4_define([_MM_ARG_ENABLE_DOCUMENTATION], [dnl AC_PROVIDE([$0])[]dnl dnl AC_ARG_VAR([DOT], [path to dot utility])[]dnl AC_ARG_VAR([DOXYGEN], [path to Doxygen utility])[]dnl AC_ARG_VAR([XSLTPROC], [path to xsltproc utility])[]dnl dnl AC_PATH_PROG([DOT], [dot], [dot]) AC_PATH_PROG([DOXYGEN], [doxygen], [doxygen]) AC_PATH_PROG([XSLTPROC], [xsltproc], [xsltproc]) dnl AC_ARG_ENABLE([documentation], [AS_HELP_STRING([--disable-documentation], [do not build or install the documentation])], [ENABLE_DOCUMENTATION=$enableval], [ENABLE_DOCUMENTATION=auto]) AS_IF([test "x$ENABLE_DOCUMENTATION" != xno], [ mm_err= AS_IF([test "x$MMDOCTOOLDIR" = x], [mm_err='dnl The mm-common-util module is available, but the installation of mm-common on this machine is missing the shared documentation utilities of the GNOME C++ bindings. It may be necessary to upgrade to a more recent release of mm-common in order to build '$PACKAGE_NAME' and install the documentation.'], [test "x$PERL" = xperl], [mm_err='Perl is required for installing the documentation.'], [test "x$USE_MAINTAINER_MODE" != xno], [ test "x$DOT" != xdot || mm_err=' dot' test "x$DOXYGEN" != xdoxygen || mm_err="$mm_err doxygen" test "x$XSLTPROC" != xxsltproc || mm_err="$mm_err xsltproc" test -z "$mm_err" || mm_err='The documentation cannot be generated because not all of the required tools are available:'$mm_err ]) AS_IF([test -z "$mm_err"], [ENABLE_DOCUMENTATION=yes], [test "x$ENABLE_DOCUMENTATION" = xyes], [AC_MSG_FAILURE([[$mm_err]])], [ENABLE_DOCUMENTATION=no; AC_MSG_WARN([[$mm_err]])]) ]) AM_CONDITIONAL([ENABLE_DOCUMENTATION], [test "x$ENABLE_DOCUMENTATION" = xyes]) AC_SUBST([DOXYGEN_TAGFILES], [[]]) AC_SUBST([DOCINSTALL_FLAGS], [[]])[]dnl ]) AC_DEFUN([MM_ARG_ENABLE_DOCUMENTATION], [dnl AC_BEFORE([$0], [MM_ARG_WITH_TAGFILE_DOC])[]dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([MM_CONFIG_DOCTOOL_DIR])[]dnl AC_REQUIRE([MM_PATH_PERL])[]dnl AC_REQUIRE([_MM_ARG_ENABLE_DOCUMENTATION])[]dnl ]) m4_define([_MM_TR_URI], [dnl [`expr "X$1" : 'X\(.*[^\\/]\)[\\/]*' 2>&]AS_MESSAGE_LOG_FD[ |]dnl [ sed 's|[\\]|/|g;s| |%20|g;s|^/|file:///|;s|^.:/|file:///&|' 2>&]AS_MESSAGE_LOG_FD[`]dnl ]) m4_define([_MM_ARG_WITH_TAGFILE_DOC], [dnl AC_MSG_CHECKING([for $1 documentation]) AC_ARG_WITH([$1-doc], [AS_HELP_STRING([[--with-$1-doc=[TAGFILE@]HTMLREFDIR]], [Link to external $1 documentation]m4_ifval([$4], [[ [auto]]]))], [ mm_htmlrefdir=`[expr "X@$withval" : '.*@\(.*\)' 2>&]AS_MESSAGE_LOG_FD` mm_tagname=`[expr "X/$withval" : '[^@]*[\\/]\([^\\/@]*\)@' 2>&]AS_MESSAGE_LOG_FD` mm_tagpath=`[expr "X$withval" : 'X\([^@]*\)@' 2>&]AS_MESSAGE_LOG_FD` test "x$mm_tagname" != x || mm_tagname="$3" test "x$mm_tagpath" != x || mm_tagpath=$mm_tagname[]dnl ], [ mm_htmlrefdir= mm_tagname="$3" mm_tagpath=$mm_tagname[]dnl ]) # Prepend working direcory if the tag file path starts with ./ or ../ AS_CASE([$mm_tagpath], [[.[\\/]*|..[\\/]*]], [mm_tagpath=`pwd`/$mm_tagpath]) m4_ifval([$4], [dnl # If no local directory was specified, get the default from the .pc file AS_IF([test "x$mm_htmlrefdir" = x], [ mm_htmlrefdir=`$PKG_CONFIG --variable=htmlrefdir "$4" 2>&AS_MESSAGE_LOG_FD`dnl ]) # If the user specified a Web URL, allow it to override the public location AS_CASE([$mm_htmlrefdir], [[http://*|https://*]], [mm_htmlrefpub=$mm_htmlrefdir], [ mm_htmlrefpub=`$PKG_CONFIG --variable=htmlrefpub "$4" 2>&AS_MESSAGE_LOG_FD` test "x$mm_htmlrefpub" != x || mm_htmlrefpub=$mm_htmlrefdir test "x$mm_htmlrefdir" != x || mm_htmlrefdir=$mm_htmlrefpub ]) # The user-supplied tag-file name takes precedence if it includes the path AS_CASE([$mm_tagpath], [[*[\\/]*]],, [ mm_doxytagfile=`$PKG_CONFIG --variable=doxytagfile "$4" 2>&AS_MESSAGE_LOG_FD` test "x$mm_doxytagfile" = x || mm_tagpath=$mm_doxytagfile ]) # Remove trailing slashes and translate to URI mm_htmlrefpub=_MM_TR_URI([$mm_htmlrefpub]) ])[]dnl mm_htmlrefdir=_MM_TR_URI([$mm_htmlrefdir]) AC_MSG_RESULT([$mm_tagpath@$mm_htmlrefdir]) AS_IF([test "x$USE_MAINTAINER_MODE" != xno && test ! -f "$mm_tagpath"], [AC_MSG_WARN([Doxygen tag file $3 not found])]) AS_IF([test "x$mm_htmlrefdir" = x], [AC_MSG_WARN([Location of external $1 documentation not set])], [AS_IF([test "x$DOCINSTALL_FLAGS" = x], [DOCINSTALL_FLAGS="-l '$mm_tagname@$mm_htmlrefdir/'"], [DOCINSTALL_FLAGS="$DOCINSTALL_FLAGS -l '$mm_tagname@$mm_htmlrefdir/'"])]) AS_IF([test "x$mm_$2" = x], [mm_val=$mm_tagpath], [mm_val="$mm_tagpath=$mm_$2"]) AS_IF([test "x$DOXYGEN_TAGFILES" = x], [DOXYGEN_TAGFILES=[\]"$mm_val[\]"], [DOXYGEN_TAGFILES="$DOXYGEN_TAGFILES "[\]"$mm_val[\]"])[]dnl ]) AC_DEFUN([MM_ARG_WITH_TAGFILE_DOC], [dnl m4_assert([$# >= 1])[]dnl m4_ifval([$2], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])])[]dnl AC_REQUIRE([MM_CONFIG_DOCTOOL_DIR])[]dnl AC_REQUIRE([_MM_ARG_ENABLE_DOCUMENTATION])[]dnl dnl AS_IF([test "x$ENABLE_DOCUMENTATION" != xno], [_MM_ARG_WITH_TAGFILE_DOC(m4_quote(m4_bpatsubst([$1], [[+]*\([-+][0123456789]\|[._]\).*$])), [htmlref]m4_ifval([$2], [[pub]], [[dir]]), [$1], [$2])])[]dnl ]) #serial 20091228 m4_define([_MM_INIT_MODULE_VERSION], [dnl m4_ifval([$3], [AC_SUBST([$2][_MAJOR_VERSION], [$3]) AC_DEFINE([$2][_MAJOR_VERSION], [$3], [Major version number of $1.]) ])[]dnl m4_ifval([$4], [AC_SUBST([$2][_MINOR_VERSION], [$4]) AC_DEFINE([$2][_MINOR_VERSION], [$4], [Minor version number of $1.]) ])[]dnl m4_ifval([$5], [AC_SUBST([$2][_MICRO_VERSION], [$5]) AC_DEFINE([$2][_MICRO_VERSION], [$5], [Micro version number of $1.]) ])[]dnl ]) m4_define([_MM_INIT_MODULE_SUBST], [dnl AC_SUBST([$5][_MODULE_NAME], ['$1']) AC_SUBST([$5][_VERSION], ['$2']) m4_ifval([$4], [AC_SUBST([$5][_API_VERSION], ['$4']) ])[]dnl _MM_INIT_MODULE_VERSION([$3], [$5], m4_bpatsubst([$2], [[^0123456789]+], [,]))[]dnl ]) m4_define([_MM_INIT_MODULE_BASENAME], [_MM_INIT_MODULE_SUBST([$1], [$2], [$3], [$4], m4_quote(AS_TR_CPP(m4_quote(m4_translit([$3], [+], [X])))))]) AC_DEFUN([MM_INIT_MODULE], [dnl m4_assert([$# >= 1])[]dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([MM_CHECK_GNU_MAKE])[]dnl _MM_INIT_MODULE_BASENAME([$1], m4_quote(m4_ifval([$2], [$2], m4_defn([AC_PACKAGE_VERSION]))), m4_quote(m4_bpatsubst([$1], [[-.0123456789]+$])), m4_quote(m4_bregexp([$1], [-?\([.0123456789]+\)$], [\1])))[]dnl ]) #serial 20090822 m4_define([_MM_CHECK_GNU_MAKE], [dnl AC_PROVIDE([$0])[]dnl AC_MSG_CHECKING([whether [$]{MAKE-make} supports GNU make features]) cat >conftest.make <<'_MMEOF' override reverse = [$](2)[$](subst ,, )[$](1) override result := [$](word 2,[$](call reverse,success,failure)) all: ; test '[$](result)' = success .PHONY: all _MMEOF AS_IF([[$]{MAKE-make} -f conftest.make >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD], [mm_gnu_make=yes], [mm_gnu_make=no]) rm -f conftest.make AC_MSG_RESULT([$mm_gnu_make]) AS_IF([test "x$mm_gnu_make" != xyes], [AC_MSG_FAILURE([[The GNU make program is required to build $PACKAGE_NAME.]])])[]dnl ]) AC_DEFUN([MM_CHECK_GNU_MAKE], [dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([_MM_CHECK_GNU_MAKE])[]dnl ]) m4_define([_MM_PATH_PERL], [dnl AC_PROVIDE([$0])[]dnl AC_ARG_VAR([PERL], [path to Perl interpreter])[]dnl AC_PATH_PROG([PERL], [perl], [perl])[]dnl ]) AC_DEFUN([MM_PATH_PERL], [dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([_MM_PATH_PERL])[]dnl ]) m4_define([_MM_CHECK_PERL], [dnl AS_IF([$PERL -e "require v$1; exit 0;" >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD], [$2], m4_ifval([$2$3], [[$3]], [[AC_MSG_FAILURE([[At least Perl ]$1[ is required to build $PACKAGE_NAME.]])]]))[]dnl ]) AC_DEFUN([MM_CHECK_PERL], [dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([_MM_PATH_PERL])[]dnl _MM_CHECK_PERL(m4_ifval([$1], [[$1]], [[5.6.0]]), [$2], [$3])[]dnl ]) AC_DEFUN([MM_PKG_CONFIG_SUBST], [dnl m4_assert([$# >= 2])[]dnl AC_REQUIRE([_MM_PRE_INIT])[]dnl AC_REQUIRE([PKG_PROG_PKG_CONFIG])[]dnl AC_MSG_CHECKING([for $1]) dnl AS_IF([test -z "[$]{$1+set}"], [$1=`$PKG_CONFIG $2 2>&AS_MESSAGE_LOG_FD` AS_IF([test "[$]?" -eq 0], [$3], [$4])]) dnl AC_MSG_RESULT([[$]$1]) AC_SUBST([$1])[]dnl ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.14.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless 'enable' is passed literally. # For symmetry, 'disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], am_maintainer_other[ make rules and dependencies not useful (and sometimes confusing) to the casual installer])], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) libwnckmm-1.0-0.1.1/configure.ac0000644000175000017500000000425212414127463016217 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . AC_INIT([wnckmm], [0.1.1], [http://example.org], [libwnckmm-1.0]) AC_PREREQ([2.59]) AC_CONFIG_SRCDIR([wnck/wnckmm.h]) AC_CONFIG_AUX_DIR([m4]) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS([config.h]) AM_INIT_AUTOMAKE([1.9 -Wno-portability foreign tar-ustar no-define nostdinc]) m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES]) AM_MAINTAINER_MODE MM_PREREQ([0.9.6]) MM_INIT_MODULE([wnckmm-1.0]) # Copy the mm-common .pl scripts into doc/, # and use them from there, # so we can dist them to avoid a tarball-build dependency. MM_CONFIG_DOCTOOL_DIR([doc]) # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html AC_SUBST([LIBWNCKMM_SO_VERSION], [1:0:1]) AC_PROG_CXX AC_DISABLE_STATIC LT_INIT PKG_CHECK_MODULES([WNCK], [libwnck-1.0]) # FIXME: the dependencies are incorrect AC_SUBST([WNCKMM_MODULES], ['libwnck-1.0 >= 2.30.0 gtkmm-2.4 >= 2.4.0 glibmm-2.4 >= 2.4.0']) PKG_CHECK_MODULES([WNCKMM], [$WNCKMM_MODULES]) MM_PKG_CONFIG_SUBST([GMMPROC_DIR], [--variable=gmmprocdir glibmm-2.4]) MM_PKG_CONFIG_SUBST([GMMPROC_EXTRA_M4_DIR], [--variable=gmmprocm4dir gtkmm-2.4 pangomm-1.4 atkmm-1.6]) MM_ARG_ENABLE_DOCUMENTATION AC_LANG([C++]) AC_CONFIG_FILES([Makefile tools/Makefile wnck/${WNCKMM_MODULE_NAME}.pc:wnck/wnckmm.pc.in wnck/src/Makefile wnck/wnckmm/Makefile doc/Makefile doc/reference/Doxyfile]) AC_OUTPUT libwnckmm-1.0-0.1.1/wnck/0000775000175000017500000000000012414127716014673 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/wnck/src/0000775000175000017500000000000012414127716015462 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/wnck/src/wnck_methods.defs0000644000175000017500000007624712257240775021036 0ustar00execexec00000000000000;; -*- scheme -*- ; object definitions ... (define-object ActionMenu (in-module "Wnck") (parent "GtkMenu") (c-name "WnckActionMenu") (gtype-id "WNCK_TYPE_ACTION_MENU") ) (define-object Application (in-module "Wnck") (parent "GObject") (c-name "WnckApplication") (gtype-id "WNCK_TYPE_APPLICATION") ) (define-object ClassGroup (in-module "Wnck") (parent "GObject") (c-name "WnckClassGroup") (gtype-id "WNCK_TYPE_CLASS_GROUP") ) (define-object Pager (in-module "Wnck") (parent "GtkContainer") (c-name "WnckPager") (gtype-id "WNCK_TYPE_PAGER") ) (define-object Screen (in-module "Wnck") (parent "GObject") (c-name "WnckScreen") (gtype-id "WNCK_TYPE_SCREEN") ) (define-object Selector (in-module "Wnck") (parent "GtkMenuBar") (c-name "WnckSelector") (gtype-id "WNCK_TYPE_SELECTOR") ) (define-object Tasklist (in-module "Wnck") (parent "GtkContainer") (c-name "WnckTasklist") (gtype-id "WNCK_TYPE_TASKLIST") ) (define-object Window (in-module "Wnck") (parent "GObject") (c-name "WnckWindow") (gtype-id "WNCK_TYPE_WINDOW") ) (define-object Workspace (in-module "Wnck") (parent "GObject") (c-name "WnckWorkspace") (gtype-id "WNCK_TYPE_WORKSPACE") ) ;; Enumerations and flags ... (define-enum PagerDisplayMode (in-module "Wnck") (c-name "WnckPagerDisplayMode") (gtype-id "WNCK_TYPE_PAGER_DISPLAY_MODE") (values '("name" "WNCK_PAGER_DISPLAY_NAME") '("content" "WNCK_PAGER_DISPLAY_CONTENT") ) ) (define-enum MotionDirection (in-module "Wnck") (c-name "WnckMotionDirection") (gtype-id "WNCK_TYPE_MOTION_DIRECTION") (values '("up" "WNCK_MOTION_UP") '("down" "WNCK_MOTION_DOWN") '("left" "WNCK_MOTION_LEFT") '("right" "WNCK_MOTION_RIGHT") ) ) (define-enum TasklistGroupingType (in-module "Wnck") (c-name "WnckTasklistGroupingType") (gtype-id "WNCK_TYPE_TASKLIST_GROUPING_TYPE") (values '("never-group" "WNCK_TASKLIST_NEVER_GROUP") '("auto-group" "WNCK_TASKLIST_AUTO_GROUP") '("always-group" "WNCK_TASKLIST_ALWAYS_GROUP") ) ) (define-enum ClientType (in-module "Wnck") (c-name "WnckClientType") (gtype-id "WNCK_TYPE_CLIENT_TYPE") (values '("application" "WNCK_CLIENT_TYPE_APPLICATION") '("pager" "WNCK_CLIENT_TYPE_PAGER") ) ) (define-flags WindowState (in-module "Wnck") (c-name "WnckWindowState") (gtype-id "WNCK_TYPE_WINDOW_STATE") (values '("minimized" "WNCK_WINDOW_STATE_MINIMIZED") '("maximized-horizontally" "WNCK_WINDOW_STATE_MAXIMIZED_HORIZONTALLY") '("maximized-vertically" "WNCK_WINDOW_STATE_MAXIMIZED_VERTICALLY") '("shaded" "WNCK_WINDOW_STATE_SHADED") '("skip-pager" "WNCK_WINDOW_STATE_SKIP_PAGER") '("skip-tasklist" "WNCK_WINDOW_STATE_SKIP_TASKLIST") '("sticky" "WNCK_WINDOW_STATE_STICKY") '("hidden" "WNCK_WINDOW_STATE_HIDDEN") '("fullscreen" "WNCK_WINDOW_STATE_FULLSCREEN") '("demands-attention" "WNCK_WINDOW_STATE_DEMANDS_ATTENTION") '("urgent" "WNCK_WINDOW_STATE_URGENT") '("above" "WNCK_WINDOW_STATE_ABOVE") '("below" "WNCK_WINDOW_STATE_BELOW") ) ) (define-flags WindowActions (in-module "Wnck") (c-name "WnckWindowActions") (gtype-id "WNCK_TYPE_WINDOW_ACTIONS") (values '("move" "WNCK_WINDOW_ACTION_MOVE") '("resize" "WNCK_WINDOW_ACTION_RESIZE") '("shade" "WNCK_WINDOW_ACTION_SHADE") '("stick" "WNCK_WINDOW_ACTION_STICK") '("maximize-horizontally" "WNCK_WINDOW_ACTION_MAXIMIZE_HORIZONTALLY") '("maximize-vertically" "WNCK_WINDOW_ACTION_MAXIMIZE_VERTICALLY") '("change-workspace" "WNCK_WINDOW_ACTION_CHANGE_WORKSPACE") '("close" "WNCK_WINDOW_ACTION_CLOSE") '("unmaximize-horizontally" "WNCK_WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY") '("unmaximize-vertically" "WNCK_WINDOW_ACTION_UNMAXIMIZE_VERTICALLY") '("unshade" "WNCK_WINDOW_ACTION_UNSHADE") '("unstick" "WNCK_WINDOW_ACTION_UNSTICK") '("minimize" "WNCK_WINDOW_ACTION_MINIMIZE") '("unminimize" "WNCK_WINDOW_ACTION_UNMINIMIZE") '("maximize" "WNCK_WINDOW_ACTION_MAXIMIZE") '("unmaximize" "WNCK_WINDOW_ACTION_UNMAXIMIZE") '("fullscreen" "WNCK_WINDOW_ACTION_FULLSCREEN") '("above" "WNCK_WINDOW_ACTION_ABOVE") '("below" "WNCK_WINDOW_ACTION_BELOW") ) ) (define-enum WindowType (in-module "Wnck") (c-name "WnckWindowType") (gtype-id "WNCK_TYPE_WINDOW_TYPE") (values '("normal" "WNCK_WINDOW_NORMAL") '("desktop" "WNCK_WINDOW_DESKTOP") '("dock" "WNCK_WINDOW_DOCK") '("dialog" "WNCK_WINDOW_DIALOG") '("toolbar" "WNCK_WINDOW_TOOLBAR") '("menu" "WNCK_WINDOW_MENU") '("utility" "WNCK_WINDOW_UTILITY") '("splashscreen" "WNCK_WINDOW_SPLASHSCREEN") ) ) (define-enum WindowGravity (in-module "Wnck") (c-name "WnckWindowGravity") (gtype-id "WNCK_TYPE_WINDOW_GRAVITY") (values '("current" "WNCK_WINDOW_GRAVITY_CURRENT") '("northwest" "WNCK_WINDOW_GRAVITY_NORTHWEST") '("north" "WNCK_WINDOW_GRAVITY_NORTH") '("northeast" "WNCK_WINDOW_GRAVITY_NORTHEAST") '("west" "WNCK_WINDOW_GRAVITY_WEST") '("center" "WNCK_WINDOW_GRAVITY_CENTER") '("east" "WNCK_WINDOW_GRAVITY_EAST") '("southwest" "WNCK_WINDOW_GRAVITY_SOUTHWEST") '("south" "WNCK_WINDOW_GRAVITY_SOUTH") '("southeast" "WNCK_WINDOW_GRAVITY_SOUTHEAST") '("static" "WNCK_WINDOW_GRAVITY_STATIC") ) ) (define-flags WindowMoveResizeMask (in-module "Wnck") (c-name "WnckWindowMoveResizeMask") (gtype-id "WNCK_TYPE_WINDOW_MOVE_RESIZE_MASK") (values '("x" "WNCK_WINDOW_CHANGE_X") '("y" "WNCK_WINDOW_CHANGE_Y") '("width" "WNCK_WINDOW_CHANGE_WIDTH") '("height" "WNCK_WINDOW_CHANGE_HEIGHT") ) ) ;; From application.h (define-function wnck_application_get_type (c-name "wnck_application_get_type") (return-type "GType") ) (define-function wnck_application_get (c-name "wnck_application_get") (return-type "WnckApplication*") (parameters '("gulong" "xwindow") ) ) (define-method get_xid (of-object "WnckApplication") (c-name "wnck_application_get_xid") (return-type "gulong") ) (define-method get_windows (of-object "WnckApplication") (c-name "wnck_application_get_windows") (return-type "GList*") ) (define-method get_n_windows (of-object "WnckApplication") (c-name "wnck_application_get_n_windows") (return-type "int") ) (define-method get_name (of-object "WnckApplication") (c-name "wnck_application_get_name") (return-type "const-char*") ) (define-method get_icon_name (of-object "WnckApplication") (c-name "wnck_application_get_icon_name") (return-type "const-char*") ) (define-method get_pid (of-object "WnckApplication") (c-name "wnck_application_get_pid") (return-type "int") ) (define-method get_icon (of-object "WnckApplication") (c-name "wnck_application_get_icon") (return-type "GdkPixbuf*") ) (define-method get_mini_icon (of-object "WnckApplication") (c-name "wnck_application_get_mini_icon") (return-type "GdkPixbuf*") ) (define-method get_icon_is_fallback (of-object "WnckApplication") (c-name "wnck_application_get_icon_is_fallback") (return-type "gboolean") ) (define-method get_startup_id (of-object "WnckApplication") (c-name "wnck_application_get_startup_id") (return-type "const-char*") ) ;; From class-group.h (define-function wnck_class_group_get_type (c-name "wnck_class_group_get_type") (return-type "GType") ) (define-function wnck_class_group_get (c-name "wnck_class_group_get") (return-type "WnckClassGroup*") (parameters '("const-char*" "res_class") ) ) (define-method get_windows (of-object "WnckClassGroup") (c-name "wnck_class_group_get_windows") (return-type "GList*") ) (define-method get_res_class (of-object "WnckClassGroup") (c-name "wnck_class_group_get_res_class") (return-type "const-char*") ) (define-method get_name (of-object "WnckClassGroup") (c-name "wnck_class_group_get_name") (return-type "const-char*") ) (define-method get_icon (of-object "WnckClassGroup") (c-name "wnck_class_group_get_icon") (return-type "GdkPixbuf*") ) (define-method get_mini_icon (of-object "WnckClassGroup") (c-name "wnck_class_group_get_mini_icon") (return-type "GdkPixbuf*") ) ;; From libwnck.h ;; From pager.h (define-function wnck_pager_get_type (c-name "wnck_pager_get_type") (return-type "GType") ) (define-function wnck_pager_new (c-name "wnck_pager_new") (is-constructor-of "WnckPager") (return-type "GtkWidget*") (parameters '("WnckScreen*" "screen") ) ) (define-method set_orientation (of-object "WnckPager") (c-name "wnck_pager_set_orientation") (return-type "gboolean") (parameters '("GtkOrientation" "orientation") ) ) (define-method set_n_rows (of-object "WnckPager") (c-name "wnck_pager_set_n_rows") (return-type "gboolean") (parameters '("int" "n_rows") ) ) (define-method set_display_mode (of-object "WnckPager") (c-name "wnck_pager_set_display_mode") (return-type "none") (parameters '("WnckPagerDisplayMode" "mode") ) ) (define-method set_show_all (of-object "WnckPager") (c-name "wnck_pager_set_show_all") (return-type "none") (parameters '("gboolean" "show_all_workspaces") ) ) (define-method set_shadow_type (of-object "WnckPager") (c-name "wnck_pager_set_shadow_type") (return-type "none") (parameters '("GtkShadowType" "shadow_type") ) ) (define-method set_screen (of-object "WnckPager") (c-name "wnck_pager_set_screen") (return-type "none") (parameters '("WnckScreen*" "screen") ) ) ;; From screen.h (define-function wnck_screen_get_type (c-name "wnck_screen_get_type") (return-type "GType") ) (define-function wnck_screen_get_default (c-name "wnck_screen_get_default") (return-type "WnckScreen*") ) (define-function wnck_screen_get (c-name "wnck_screen_get") (return-type "WnckScreen*") (parameters '("int" "index") ) ) (define-function wnck_screen_get_for_root (c-name "wnck_screen_get_for_root") (return-type "WnckScreen*") (parameters '("gulong" "root_window_id") ) ) (define-method get_number (of-object "WnckScreen") (c-name "wnck_screen_get_number") (return-type "int") ) (define-method get_workspace (of-object "WnckScreen") (c-name "wnck_screen_get_workspace") (return-type "WnckWorkspace*") (parameters '("int" "workspace") ) ) (define-method get_workspace_index (of-object "WnckScreen") (c-name "wnck_screen_get_workspace_index") (return-type "int") (parameters '("WnckWorkspace*" "space") ) ) (define-method get_workspace_neighbor (of-object "WnckScreen") (c-name "wnck_screen_get_workspace_neighbor") (return-type "WnckWorkspace*") (parameters '("WnckWorkspace*" "space") '("WnckMotionDirection" "direction") ) ) (define-method get_active_workspace (of-object "WnckScreen") (c-name "wnck_screen_get_active_workspace") (return-type "WnckWorkspace*") ) (define-method get_workspaces (of-object "WnckScreen") (c-name "wnck_screen_get_workspaces") (return-type "GList*") ) (define-method get_active_window (of-object "WnckScreen") (c-name "wnck_screen_get_active_window") (return-type "WnckWindow*") ) (define-method get_previously_active_window (of-object "WnckScreen") (c-name "wnck_screen_get_previously_active_window") (return-type "WnckWindow*") ) (define-method get_windows (of-object "WnckScreen") (c-name "wnck_screen_get_windows") (return-type "GList*") ) (define-method get_windows_stacked (of-object "WnckScreen") (c-name "wnck_screen_get_windows_stacked") (return-type "GList*") ) (define-method force_update (of-object "WnckScreen") (c-name "wnck_screen_force_update") (return-type "none") ) (define-method get_workspace_count (of-object "WnckScreen") (c-name "wnck_screen_get_workspace_count") (return-type "int") ) (define-method change_workspace_count (of-object "WnckScreen") (c-name "wnck_screen_change_workspace_count") (return-type "none") (parameters '("int" "count") ) ) (define-method get_window_manager_name (of-object "WnckScreen") (c-name "wnck_screen_get_window_manager_name") (return-type "const-char*") ) (define-method net_wm_supports (of-object "WnckScreen") (c-name "wnck_screen_net_wm_supports") (return-type "gboolean") (parameters '("const-char*" "atom") ) ) (define-method get_background_pixmap (of-object "WnckScreen") (c-name "wnck_screen_get_background_pixmap") (return-type "gulong") ) (define-method get_width (of-object "WnckScreen") (c-name "wnck_screen_get_width") (return-type "int") ) (define-method get_height (of-object "WnckScreen") (c-name "wnck_screen_get_height") (return-type "int") ) (define-method get_showing_desktop (of-object "WnckScreen") (c-name "wnck_screen_get_showing_desktop") (return-type "gboolean") ) (define-method toggle_showing_desktop (of-object "WnckScreen") (c-name "wnck_screen_toggle_showing_desktop") (return-type "none") (parameters '("gboolean" "show") ) ) (define-method move_viewport (of-object "WnckScreen") (c-name "wnck_screen_move_viewport") (return-type "none") (parameters '("int" "x") '("int" "y") ) ) (define-method try_set_workspace_layout (of-object "WnckScreen") (c-name "wnck_screen_try_set_workspace_layout") (return-type "int") (parameters '("int" "current_token") '("int" "rows") '("int" "columns") ) ) (define-method release_workspace_layout (of-object "WnckScreen") (c-name "wnck_screen_release_workspace_layout") (return-type "none") (parameters '("int" "current_token") ) ) (define-method calc_workspace_layout (of-object "WnckScreen") (c-name "wnck_screen_calc_workspace_layout") (return-type "none") (parameters '("int" "num_workspaces") '("int" "space_index") '("WnckWorkspaceLayout*" "layout") ) ) (define-function wnck_screen_free_workspace_layout (c-name "wnck_screen_free_workspace_layout") (return-type "none") (parameters '("WnckWorkspaceLayout*" "layout") ) ) ;; From selector.h (define-function wnck_selector_new (c-name "wnck_selector_new") (is-constructor-of "WnckSelector") (return-type "GtkWidget*") ) (define-function wnck_selector_get_type (c-name "wnck_selector_get_type") (return-type "GType") ) ;; From tasklist.h (define-function wnck_tasklist_get_type (c-name "wnck_tasklist_get_type") (return-type "GType") ) (define-function wnck_tasklist_new (c-name "wnck_tasklist_new") (is-constructor-of "WnckTasklist") (return-type "GtkWidget*") (parameters '("WnckScreen*" "screen") ) ) (define-method get_size_hint_list (of-object "WnckTasklist") (c-name "wnck_tasklist_get_size_hint_list") (return-type "const-int*") (parameters '("int*" "n_elements") ) ) (define-method set_grouping (of-object "WnckTasklist") (c-name "wnck_tasklist_set_grouping") (return-type "none") (parameters '("WnckTasklistGroupingType" "grouping") ) ) (define-method set_switch_workspace_on_unminimize (of-object "WnckTasklist") (c-name "wnck_tasklist_set_switch_workspace_on_unminimize") (return-type "none") (parameters '("gboolean" "switch_workspace_on_unminimize") ) ) (define-method set_grouping_limit (of-object "WnckTasklist") (c-name "wnck_tasklist_set_grouping_limit") (return-type "none") (parameters '("gint" "limit") ) ) (define-method set_include_all_workspaces (of-object "WnckTasklist") (c-name "wnck_tasklist_set_include_all_workspaces") (return-type "none") (parameters '("gboolean" "include_all_workspaces") ) ) (define-method set_button_relief (of-object "WnckTasklist") (c-name "wnck_tasklist_set_button_relief") (return-type "none") (parameters '("GtkReliefStyle" "relief") ) ) (define-method set_orientation (of-object "WnckTasklist") (c-name "wnck_tasklist_set_orientation") (return-type "none") (parameters '("GtkOrientation" "orient") ) ) (define-method set_minimum_width (of-object "WnckTasklist") (c-name "wnck_tasklist_set_minimum_width") (return-type "none") (parameters '("gint" "size") ) ) (define-method get_minimum_width (of-object "WnckTasklist") (c-name "wnck_tasklist_get_minimum_width") (return-type "gint") ) (define-method set_minimum_height (of-object "WnckTasklist") (c-name "wnck_tasklist_set_minimum_height") (return-type "none") (parameters '("gint" "size") ) ) (define-method get_minimum_height (of-object "WnckTasklist") (c-name "wnck_tasklist_get_minimum_height") (return-type "gint") ) (define-method set_icon_loader (of-object "WnckTasklist") (c-name "wnck_tasklist_set_icon_loader") (return-type "none") (parameters '("WnckLoadIconFunction" "load_icon_func") '("void*" "data") '("GDestroyNotify" "free_data_func") ) ) (define-method set_screen (of-object "WnckTasklist") (c-name "wnck_tasklist_set_screen") (return-type "none") (parameters '("WnckScreen*" "screen") ) ) ;; From util.h (define-function wnck_set_client_type (c-name "wnck_set_client_type") (return-type "none") (parameters '("WnckClientType" "ewmh_sourceindication_client_type") ) ) (define-function wnck_xid_read_resource_usage (c-name "wnck_xid_read_resource_usage") (return-type "none") (parameters '("GdkDisplay*" "gdk_display") '("gulong" "xid") '("WnckResourceUsage*" "usage") ) ) (define-function wnck_pid_read_resource_usage (c-name "wnck_pid_read_resource_usage") (return-type "none") (parameters '("GdkDisplay*" "gdk_display") '("gulong" "pid") '("WnckResourceUsage*" "usage") ) ) (define-function wnck_gtk_window_set_dock_type (c-name "wnck_gtk_window_set_dock_type") (return-type "none") (parameters '("GtkWindow*" "window") ) ) ;; From window-action-menu.h (define-function wnck_action_menu_get_type (c-name "wnck_action_menu_get_type") (return-type "GType") ) (define-function wnck_action_menu_new (c-name "wnck_action_menu_new") (is-constructor-of "WnckActionMenu") (return-type "GtkWidget*") (parameters '("WnckWindow*" "window") ) ) (define-function wnck_create_window_action_menu (c-name "wnck_create_window_action_menu") (return-type "GtkWidget*") (parameters '("WnckWindow*" "window") ) ) ;; From window.h (define-function wnck_window_get_type (c-name "wnck_window_get_type") (return-type "GType") ) (define-function wnck_window_get (c-name "wnck_window_get") (return-type "WnckWindow*") (parameters '("gulong" "xwindow") ) ) (define-method get_screen (of-object "WnckWindow") (c-name "wnck_window_get_screen") (return-type "WnckScreen*") ) (define-method has_name (of-object "WnckWindow") (c-name "wnck_window_has_name") (return-type "gboolean") ) (define-method get_name (of-object "WnckWindow") (c-name "wnck_window_get_name") (return-type "const-char*") ) (define-method has_icon_name (of-object "WnckWindow") (c-name "wnck_window_has_icon_name") (return-type "gboolean") ) (define-method get_icon_name (of-object "WnckWindow") (c-name "wnck_window_get_icon_name") (return-type "const-char*") ) (define-method get_application (of-object "WnckWindow") (c-name "wnck_window_get_application") (return-type "WnckApplication*") ) (define-method get_transient (of-object "WnckWindow") (c-name "wnck_window_get_transient") (return-type "WnckWindow*") ) (define-method get_group_leader (of-object "WnckWindow") (c-name "wnck_window_get_group_leader") (return-type "gulong") ) (define-method get_xid (of-object "WnckWindow") (c-name "wnck_window_get_xid") (return-type "gulong") ) (define-method get_class_group (of-object "WnckWindow") (c-name "wnck_window_get_class_group") (return-type "WnckClassGroup*") ) (define-method get_session_id (of-object "WnckWindow") (c-name "wnck_window_get_session_id") (return-type "const-char*") ) (define-method get_session_id_utf8 (of-object "WnckWindow") (c-name "wnck_window_get_session_id_utf8") (return-type "const-char*") ) (define-method get_pid (of-object "WnckWindow") (c-name "wnck_window_get_pid") (return-type "int") ) (define-method get_sort_order (of-object "WnckWindow") (c-name "wnck_window_get_sort_order") (return-type "gint") ) (define-method set_sort_order (of-object "WnckWindow") (c-name "wnck_window_set_sort_order") (return-type "none") (parameters '("gint" "order") ) ) (define-method get_window_type (of-object "WnckWindow") (c-name "wnck_window_get_window_type") (return-type "WnckWindowType") ) (define-method set_window_type (of-object "WnckWindow") (c-name "wnck_window_set_window_type") (return-type "none") (parameters '("WnckWindowType" "wintype") ) ) (define-method is_minimized (of-object "WnckWindow") (c-name "wnck_window_is_minimized") (return-type "gboolean") ) (define-method is_maximized_horizontally (of-object "WnckWindow") (c-name "wnck_window_is_maximized_horizontally") (return-type "gboolean") ) (define-method is_maximized_vertically (of-object "WnckWindow") (c-name "wnck_window_is_maximized_vertically") (return-type "gboolean") ) (define-method is_maximized (of-object "WnckWindow") (c-name "wnck_window_is_maximized") (return-type "gboolean") ) (define-method is_shaded (of-object "WnckWindow") (c-name "wnck_window_is_shaded") (return-type "gboolean") ) (define-method is_above (of-object "WnckWindow") (c-name "wnck_window_is_above") (return-type "gboolean") ) (define-method is_below (of-object "WnckWindow") (c-name "wnck_window_is_below") (return-type "gboolean") ) (define-method is_skip_pager (of-object "WnckWindow") (c-name "wnck_window_is_skip_pager") (return-type "gboolean") ) (define-method is_skip_tasklist (of-object "WnckWindow") (c-name "wnck_window_is_skip_tasklist") (return-type "gboolean") ) (define-method is_fullscreen (of-object "WnckWindow") (c-name "wnck_window_is_fullscreen") (return-type "gboolean") ) (define-method is_sticky (of-object "WnckWindow") (c-name "wnck_window_is_sticky") (return-type "gboolean") ) (define-method needs_attention (of-object "WnckWindow") (c-name "wnck_window_needs_attention") (return-type "gboolean") ) (define-method or_transient_needs_attention (of-object "WnckWindow") (c-name "wnck_window_or_transient_needs_attention") (return-type "gboolean") ) (define-method set_skip_pager (of-object "WnckWindow") (c-name "wnck_window_set_skip_pager") (return-type "none") (parameters '("gboolean" "skip") ) ) (define-method set_skip_tasklist (of-object "WnckWindow") (c-name "wnck_window_set_skip_tasklist") (return-type "none") (parameters '("gboolean" "skip") ) ) (define-method set_fullscreen (of-object "WnckWindow") (c-name "wnck_window_set_fullscreen") (return-type "none") (parameters '("gboolean" "fullscreen") ) ) (define-method close (of-object "WnckWindow") (c-name "wnck_window_close") (return-type "none") (parameters '("guint32" "timestamp") ) ) (define-method minimize (of-object "WnckWindow") (c-name "wnck_window_minimize") (return-type "none") ) (define-method unminimize (of-object "WnckWindow") (c-name "wnck_window_unminimize") (return-type "none") (parameters '("guint32" "timestamp") ) ) (define-method maximize (of-object "WnckWindow") (c-name "wnck_window_maximize") (return-type "none") ) (define-method unmaximize (of-object "WnckWindow") (c-name "wnck_window_unmaximize") (return-type "none") ) (define-method maximize_horizontally (of-object "WnckWindow") (c-name "wnck_window_maximize_horizontally") (return-type "none") ) (define-method unmaximize_horizontally (of-object "WnckWindow") (c-name "wnck_window_unmaximize_horizontally") (return-type "none") ) (define-method maximize_vertically (of-object "WnckWindow") (c-name "wnck_window_maximize_vertically") (return-type "none") ) (define-method unmaximize_vertically (of-object "WnckWindow") (c-name "wnck_window_unmaximize_vertically") (return-type "none") ) (define-method shade (of-object "WnckWindow") (c-name "wnck_window_shade") (return-type "none") ) (define-method unshade (of-object "WnckWindow") (c-name "wnck_window_unshade") (return-type "none") ) (define-method make_above (of-object "WnckWindow") (c-name "wnck_window_make_above") (return-type "none") ) (define-method unmake_above (of-object "WnckWindow") (c-name "wnck_window_unmake_above") (return-type "none") ) (define-method make_below (of-object "WnckWindow") (c-name "wnck_window_make_below") (return-type "none") ) (define-method unmake_below (of-object "WnckWindow") (c-name "wnck_window_unmake_below") (return-type "none") ) (define-method stick (of-object "WnckWindow") (c-name "wnck_window_stick") (return-type "none") ) (define-method unstick (of-object "WnckWindow") (c-name "wnck_window_unstick") (return-type "none") ) (define-method keyboard_move (of-object "WnckWindow") (c-name "wnck_window_keyboard_move") (return-type "none") ) (define-method keyboard_size (of-object "WnckWindow") (c-name "wnck_window_keyboard_size") (return-type "none") ) (define-method get_workspace (of-object "WnckWindow") (c-name "wnck_window_get_workspace") (return-type "WnckWorkspace*") ) (define-method move_to_workspace (of-object "WnckWindow") (c-name "wnck_window_move_to_workspace") (return-type "none") (parameters '("WnckWorkspace*" "space") ) ) (define-method is_pinned (of-object "WnckWindow") (c-name "wnck_window_is_pinned") (return-type "gboolean") ) (define-method pin (of-object "WnckWindow") (c-name "wnck_window_pin") (return-type "none") ) (define-method unpin (of-object "WnckWindow") (c-name "wnck_window_unpin") (return-type "none") ) (define-method activate (of-object "WnckWindow") (c-name "wnck_window_activate") (return-type "none") (parameters '("guint32" "timestamp") ) ) (define-method is_active (of-object "WnckWindow") (c-name "wnck_window_is_active") (return-type "gboolean") ) (define-method is_most_recently_activated (of-object "WnckWindow") (c-name "wnck_window_is_most_recently_activated") (return-type "gboolean") ) (define-method activate_transient (of-object "WnckWindow") (c-name "wnck_window_activate_transient") (return-type "none") (parameters '("guint32" "timestamp") ) ) (define-method transient_is_most_recently_activated (of-object "WnckWindow") (c-name "wnck_window_transient_is_most_recently_activated") (return-type "gboolean") ) (define-method get_icon (of-object "WnckWindow") (c-name "wnck_window_get_icon") (return-type "GdkPixbuf*") ) (define-method get_mini_icon (of-object "WnckWindow") (c-name "wnck_window_get_mini_icon") (return-type "GdkPixbuf*") ) (define-method get_icon_is_fallback (of-object "WnckWindow") (c-name "wnck_window_get_icon_is_fallback") (return-type "gboolean") ) (define-method set_icon_geometry (of-object "WnckWindow") (c-name "wnck_window_set_icon_geometry") (return-type "none") (parameters '("int" "x") '("int" "y") '("int" "width") '("int" "height") ) ) (define-method get_actions (of-object "WnckWindow") (c-name "wnck_window_get_actions") (return-type "WnckWindowActions") ) (define-method get_state (of-object "WnckWindow") (c-name "wnck_window_get_state") (return-type "WnckWindowState") ) (define-method get_client_window_geometry (of-object "WnckWindow") (c-name "wnck_window_get_client_window_geometry") (return-type "none") (parameters '("int*" "xp") '("int*" "yp") '("int*" "widthp") '("int*" "heightp") ) ) (define-method get_geometry (of-object "WnckWindow") (c-name "wnck_window_get_geometry") (return-type "none") (parameters '("int*" "xp") '("int*" "yp") '("int*" "widthp") '("int*" "heightp") ) ) (define-method set_geometry (of-object "WnckWindow") (c-name "wnck_window_set_geometry") (return-type "none") (parameters '("WnckWindowGravity" "gravity") '("WnckWindowMoveResizeMask" "geometry_mask") '("int" "x") '("int" "y") '("int" "width") '("int" "height") ) ) (define-method is_visible_on_workspace (of-object "WnckWindow") (c-name "wnck_window_is_visible_on_workspace") (return-type "gboolean") (parameters '("WnckWorkspace*" "workspace") ) ) (define-method is_on_workspace (of-object "WnckWindow") (c-name "wnck_window_is_on_workspace") (return-type "gboolean") (parameters '("WnckWorkspace*" "workspace") ) ) (define-method is_in_viewport (of-object "WnckWindow") (c-name "wnck_window_is_in_viewport") (return-type "gboolean") (parameters '("WnckWorkspace*" "workspace") ) ) ;; From wnck-enum-types.h (define-function wnck_pager_display_mode_get_type (c-name "wnck_pager_display_mode_get_type") (return-type "GType") ) (define-function wnck_motion_direction_get_type (c-name "wnck_motion_direction_get_type") (return-type "GType") ) (define-function wnck_tasklist_grouping_type_get_type (c-name "wnck_tasklist_grouping_type_get_type") (return-type "GType") ) (define-function wnck_client_type_get_type (c-name "wnck_client_type_get_type") (return-type "GType") ) (define-function wnck_window_state_get_type (c-name "wnck_window_state_get_type") (return-type "GType") ) (define-function wnck_window_actions_get_type (c-name "wnck_window_actions_get_type") (return-type "GType") ) (define-function wnck_window_type_get_type (c-name "wnck_window_type_get_type") (return-type "GType") ) (define-function wnck_window_gravity_get_type (c-name "wnck_window_gravity_get_type") (return-type "GType") ) (define-function wnck_window_move_resize_mask_get_type (c-name "wnck_window_move_resize_mask_get_type") (return-type "GType") ) ;; From workspace.h (define-function wnck_workspace_get_type (c-name "wnck_workspace_get_type") (return-type "GType") ) (define-method get_number (of-object "WnckWorkspace") (c-name "wnck_workspace_get_number") (return-type "int") ) (define-method get_name (of-object "WnckWorkspace") (c-name "wnck_workspace_get_name") (return-type "const-char*") ) (define-method change_name (of-object "WnckWorkspace") (c-name "wnck_workspace_change_name") (return-type "none") (parameters '("const-char*" "name") ) ) (define-method get_screen (of-object "WnckWorkspace") (c-name "wnck_workspace_get_screen") (return-type "WnckScreen*") ) (define-method activate (of-object "WnckWorkspace") (c-name "wnck_workspace_activate") (return-type "none") (parameters '("guint32" "timestamp") ) ) (define-method get_width (of-object "WnckWorkspace") (c-name "wnck_workspace_get_width") (return-type "int") ) (define-method get_height (of-object "WnckWorkspace") (c-name "wnck_workspace_get_height") (return-type "int") ) (define-method get_viewport_x (of-object "WnckWorkspace") (c-name "wnck_workspace_get_viewport_x") (return-type "int") ) (define-method get_viewport_y (of-object "WnckWorkspace") (c-name "wnck_workspace_get_viewport_y") (return-type "int") ) (define-method is_virtual (of-object "WnckWorkspace") (c-name "wnck_workspace_is_virtual") (return-type "gboolean") ) (define-method get_layout_row (of-object "WnckWorkspace") (c-name "wnck_workspace_get_layout_row") (return-type "int") ) (define-method get_layout_column (of-object "WnckWorkspace") (c-name "wnck_workspace_get_layout_column") (return-type "int") ) (define-method get_neighbor (of-object "WnckWorkspace") (c-name "wnck_workspace_get_neighbor") (return-type "WnckWorkspace*") (parameters '("WnckMotionDirection" "direction") ) ) libwnckmm-1.0-0.1.1/wnck/src/workspace.hg0000644000175000017500000000422312257635200017774 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ _DEFS(wnckmm,wnck) _PINCLUDE(glibmm/private/object_p.h) namespace Wnck { class Screen; _WRAP_ENUM(MotionDirection, WnckMotionDirection) /** This represents a workspace. */ class Workspace : public Glib::Object { _CLASS_WNCKOBJECT(Workspace, WnckWorkspace, WNCK_WORKSPACE, Glib::Object, GObject) protected: _CTOR_DEFAULT() public: _WRAP_METHOD(Screen* get_screen() const, wnck_workspace_get_screen) _WRAP_METHOD(int get_number() const, wnck_workspace_get_number) _WRAP_METHOD(std::string get_name() const, wnck_workspace_get_name) _WRAP_METHOD(void set_name(const std::string& name) const, wnck_workspace_change_name) _WRAP_METHOD(int get_width() const, wnck_workspace_get_width) _WRAP_METHOD(int get_height() const, wnck_workspace_get_height) _WRAP_METHOD(int get_viewport_x() const, wnck_workspace_get_viewport_x) _WRAP_METHOD(int get_viewport_y() const, wnck_workspace_get_viewport_y) _WRAP_METHOD(bool is_virtual() const, wnck_workspace_is_virtual) _WRAP_METHOD(int get_layout_row() const, wnck_workspace_get_layout_row) _WRAP_METHOD(int get_layout_column() const, wnck_workspace_get_layout_column) _WRAP_METHOD(Workspace* get_neighbor(MotionDirection direction) const, wnck_workspace_get_neighbor) _WRAP_METHOD(void activate(guint32 timestamp), wnck_workspace_activate) _WRAP_SIGNAL(void name_changed(), "name-changed") }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/class-group.hg0000644000175000017500000000356412267420472020250 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(glibmm/private/object_p.h) namespace Wnck { /** This represents a class group. */ class ClassGroup : public Glib::Object { _CLASS_WNCKOBJECT(ClassGroup, WnckClassGroup, WNCK_CLASS_GROUP, Glib::Object, GObject) protected: _CTOR_DEFAULT() public: _WRAP_METHOD(static ClassGroup* get(const std::string& res_class), wnck_class_group_get) _WRAP_METHOD(std::string get_res_class() const, wnck_class_group_get_res_class) _WRAP_METHOD(std::string get_name() const, wnck_class_group_get_name) // TODO: is pixbuf const? _WRAP_METHOD(Glib::RefPtr get_icon() const, wnck_class_group_get_icon, refreturn) // TODO: is pixbuf const? _WRAP_METHOD(Glib::RefPtr get_mini_icon() const, wnck_class_group_get_mini_icon, refreturn) // TODO: wnck_class_group_get_windows // The following two are not wrapped due to a bug in libwnck // (the signal definitions are wrong, see class-group.h) // _WRAP_SIGNAL(void name_changed(), "name-changed") // _WRAP_SIGNAL(void icon_changed(), "icon-changed") }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/action-menu.hg0000644000175000017500000000226512257570220020221 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(gtkmm/private/menu_p.h) namespace Wnck { class Window; /** This represents an action menu. */ class ActionMenu : public Gtk::Menu { _CLASS_GTKOBJECT(ActionMenu, WnckActionMenu, WNCK_ACTION_MENU, Gtk::Menu, GtkMenu) public: /** Creates an action menu for a window */ explicit ActionMenu(const Window* window); // TODO: signals }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/workspace.ccg0000644000175000017500000000155612257625565020155 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/selector.ccg0000644000175000017500000000164212257640507017764 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { Selector::Selector() : Gtk::MenuBar((GtkMenuBar*)wnck_selector_new()) { } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/wnck_signals.defs0000644000175000017500000000715312257242454021015 0ustar00execexec00000000000000;; From WnckWindow (define-signal state-changed (of-object "WnckWindow") (return-type "void") (when "last") (parameters '("WnckWindowState" "p0") '("WnckWindowState" "p1") ) ) (define-signal name-changed (of-object "WnckWindow") (return-type "void") (when "last") ) (define-signal icon-changed (of-object "WnckWindow") (return-type "void") (when "last") ) (define-signal workspace-changed (of-object "WnckWindow") (return-type "void") (when "last") ) (define-signal actions-changed (of-object "WnckWindow") (return-type "void") (when "last") (parameters '("WnckWindowActions" "p0") '("WnckWindowActions" "p1") ) ) (define-signal geometry-changed (of-object "WnckWindow") (return-type "void") (when "last") ) ;; From WnckApplication (define-signal name-changed (of-object "WnckApplication") (return-type "void") (when "last") ) (define-signal icon-changed (of-object "WnckApplication") (return-type "void") (when "last") ) ;; From WnckClassGroup (define-signal name-changed (of-object "WnckClassGroup") (return-type "void") (when "last") ) (define-signal icon-changed (of-object "WnckClassGroup") (return-type "void") (when "last") ) ;; From WnckWorkspace (define-signal name-changed (of-object "WnckWorkspace") (return-type "void") (when "last") ) ;; From WnckScreen (define-signal active-window-changed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWindow*" "p0") ) ) (define-signal active-workspace-changed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWorkspace*" "p0") ) ) (define-signal window-stacking-changed (of-object "WnckScreen") (return-type "void") (when "last") ) (define-signal window-opened (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWindow*" "p0") ) ) (define-signal window-closed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWindow*" "p0") ) ) (define-signal workspace-created (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWorkspace*" "p0") ) ) (define-signal workspace-destroyed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckWorkspace*" "p0") ) ) (define-signal application-opened (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckApplication*" "p0") ) ) (define-signal application-closed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckApplication*" "p0") ) ) (define-signal class-group-opened (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckClassGroup*" "p0") ) ) (define-signal class-group-closed (of-object "WnckScreen") (return-type "void") (when "last") (parameters '("WnckClassGroup*" "p0") ) ) (define-signal background-changed (of-object "WnckScreen") (return-type "void") (when "last") ) (define-signal showing-desktop-changed (of-object "WnckScreen") (return-type "void") (when "last") ) (define-signal viewports-changed (of-object "WnckScreen") (return-type "void") (when "last") ) (define-signal window-manager-changed (of-object "WnckScreen") (return-type "void") (when "last") ) ;; From WnckPager ;; From WnckTasklist ;; From WnckSelector ;; From WnckActionMenu (define-property window (of-object "WnckActionMenu") (prop-type "GParamPointer") (docs "The window that will be manipulated through this menu") (readable #t) (writable #t) (construct-only #t) ) libwnckmm-1.0-0.1.1/wnck/src/wnck.defs0000644000175000017500000000012412257243570017264 0ustar00execexec00000000000000(include wnck_methods.defs) (include wnck_signals.defs) (include wnck_enums.defs) libwnckmm-1.0-0.1.1/wnck/src/class-group.ccg0000644000175000017500000000152312257625505020402 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/tasklist.ccg0000644000175000017500000000152312257625547020007 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/wnck_enums.defs0000644000175000017500000002220712257240775020505 0ustar00execexec00000000000000;; From pager.h ;; Original typedef: ;; typedef enum { ;; WNCK_PAGER_DISPLAY_NAME, ;; WNCK_PAGER_DISPLAY_CONTENT ;; } WnckPagerDisplayMode; (define-enum-extended PagerDisplayMode (in-module "Wnck") (c-name "WnckPagerDisplayMode") (values '("name" "WNCK_PAGER_DISPLAY_NAME" "0") '("content" "WNCK_PAGER_DISPLAY_CONTENT" "1") ) ) ;; From screen.h ;; Original typedef: ;; typedef enum ;; { ;; WNCK_MOTION_UP = -1, ;; WNCK_MOTION_DOWN = -2, ;; WNCK_MOTION_LEFT = -3, ;; WNCK_MOTION_RIGHT = -4 ;; } WnckMotionDirection; (define-enum-extended MotionDirection (in-module "Wnck") (c-name "WnckMotionDirection") (values '("up" "WNCK_MOTION_UP" "-1") '("down" "WNCK_MOTION_DOWN" "-2") '("left" "WNCK_MOTION_LEFT" "-3") '("right" "WNCK_MOTION_RIGHT" "-4") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_LAYOUT_ORIENTATION_HORIZONTAL, ;; WNCK_LAYOUT_ORIENTATION_VERTICAL ;; } _WnckLayoutOrientation; (define-enum-extended _LayoutOrientation (in-module "Wnck") (c-name "_WnckLayoutOrientation") (values '("horizontal" "WNCK_LAYOUT_ORIENTATION_HORIZONTAL" "0") '("vertical" "WNCK_LAYOUT_ORIENTATION_VERTICAL" "1") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_LAYOUT_CORNER_TOPLEFT, ;; WNCK_LAYOUT_CORNER_TOPRIGHT, ;; WNCK_LAYOUT_CORNER_BOTTOMRIGHT, ;; WNCK_LAYOUT_CORNER_BOTTOMLEFT ;; } _WnckLayoutCorner; (define-enum-extended _LayoutCorner (in-module "Wnck") (c-name "_WnckLayoutCorner") (values '("topleft" "WNCK_LAYOUT_CORNER_TOPLEFT" "0") '("topright" "WNCK_LAYOUT_CORNER_TOPRIGHT" "1") '("bottomright" "WNCK_LAYOUT_CORNER_BOTTOMRIGHT" "2") '("bottomleft" "WNCK_LAYOUT_CORNER_BOTTOMLEFT" "3") ) ) ;; From tasklist.h ;; Original typedef: ;; typedef enum { ;; WNCK_TASKLIST_NEVER_GROUP, ;; WNCK_TASKLIST_AUTO_GROUP, ;; WNCK_TASKLIST_ALWAYS_GROUP ;; } WnckTasklistGroupingType; (define-enum-extended TasklistGroupingType (in-module "Wnck") (c-name "WnckTasklistGroupingType") (values '("never-group" "WNCK_TASKLIST_NEVER_GROUP" "0") '("auto-group" "WNCK_TASKLIST_AUTO_GROUP" "1") '("always-group" "WNCK_TASKLIST_ALWAYS_GROUP" "2") ) ) ;; From util.h ;; Original typedef: ;; typedef enum { ;; WNCK_CLIENT_TYPE_APPLICATION = 1, ;; WNCK_CLIENT_TYPE_PAGER = 2 ;; } WnckClientType; (define-enum-extended ClientType (in-module "Wnck") (c-name "WnckClientType") (values '("application" "WNCK_CLIENT_TYPE_APPLICATION" "1") '("pager" "WNCK_CLIENT_TYPE_PAGER" "2") ) ) ;; From window.h ;; Original typedef: ;; typedef enum ;; { ;; WNCK_WINDOW_STATE_MINIMIZED = 1 << 0, ;; WNCK_WINDOW_STATE_MAXIMIZED_HORIZONTALLY = 1 << 1, ;; WNCK_WINDOW_STATE_MAXIMIZED_VERTICALLY = 1 << 2, ;; WNCK_WINDOW_STATE_SHADED = 1 << 3, ;; WNCK_WINDOW_STATE_SKIP_PAGER = 1 << 4, ;; WNCK_WINDOW_STATE_SKIP_TASKLIST = 1 << 5, ;; WNCK_WINDOW_STATE_STICKY = 1 << 6, ;; WNCK_WINDOW_STATE_HIDDEN = 1 << 7, ;; WNCK_WINDOW_STATE_FULLSCREEN = 1 << 8, ;; WNCK_WINDOW_STATE_DEMANDS_ATTENTION = 1 << 9, ;; WNCK_WINDOW_STATE_URGENT = 1 << 10, ;; WNCK_WINDOW_STATE_ABOVE = 1 << 11, ;; WNCK_WINDOW_STATE_BELOW = 1 << 12 ;; } WnckWindowState; (define-flags-extended WindowState (in-module "Wnck") (c-name "WnckWindowState") (values '("minimized" "WNCK_WINDOW_STATE_MINIMIZED" "1 << 0") '("maximized-horizontally" "WNCK_WINDOW_STATE_MAXIMIZED_HORIZONTALLY" "1 << 1") '("maximized-vertically" "WNCK_WINDOW_STATE_MAXIMIZED_VERTICALLY" "1 << 2") '("shaded" "WNCK_WINDOW_STATE_SHADED" "1 << 3") '("skip-pager" "WNCK_WINDOW_STATE_SKIP_PAGER" "1 << 4") '("skip-tasklist" "WNCK_WINDOW_STATE_SKIP_TASKLIST" "1 << 5") '("sticky" "WNCK_WINDOW_STATE_STICKY" "1 << 6") '("hidden" "WNCK_WINDOW_STATE_HIDDEN" "1 << 7") '("fullscreen" "WNCK_WINDOW_STATE_FULLSCREEN" "1 << 8") '("demands-attention" "WNCK_WINDOW_STATE_DEMANDS_ATTENTION" "1 << 9") '("urgent" "WNCK_WINDOW_STATE_URGENT" "1 << 10") '("above" "WNCK_WINDOW_STATE_ABOVE" "1 << 11") '("below" "WNCK_WINDOW_STATE_BELOW" "1 << 12") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_WINDOW_ACTION_MOVE = 1 << 0, ;; WNCK_WINDOW_ACTION_RESIZE = 1 << 1, ;; WNCK_WINDOW_ACTION_SHADE = 1 << 2, ;; WNCK_WINDOW_ACTION_STICK = 1 << 3, ;; WNCK_WINDOW_ACTION_MAXIMIZE_HORIZONTALLY = 1 << 4, ;; WNCK_WINDOW_ACTION_MAXIMIZE_VERTICALLY = 1 << 5, ;; WNCK_WINDOW_ACTION_CHANGE_WORKSPACE = 1 << 6, /* includes pin/unpin */ ;; WNCK_WINDOW_ACTION_CLOSE = 1 << 7, ;; WNCK_WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY = 1 << 8, ;; WNCK_WINDOW_ACTION_UNMAXIMIZE_VERTICALLY = 1 << 9, ;; WNCK_WINDOW_ACTION_UNSHADE = 1 << 10, ;; WNCK_WINDOW_ACTION_UNSTICK = 1 << 11, ;; WNCK_WINDOW_ACTION_MINIMIZE = 1 << 12, ;; WNCK_WINDOW_ACTION_UNMINIMIZE = 1 << 13, ;; WNCK_WINDOW_ACTION_MAXIMIZE = 1 << 14, ;; WNCK_WINDOW_ACTION_UNMAXIMIZE = 1 << 15, ;; WNCK_WINDOW_ACTION_FULLSCREEN = 1 << 16, ;; WNCK_WINDOW_ACTION_ABOVE = 1 << 17, ;; WNCK_WINDOW_ACTION_BELOW = 1 << 18 ;; } WnckWindowActions; (define-flags-extended WindowActions (in-module "Wnck") (c-name "WnckWindowActions") (values '("move" "WNCK_WINDOW_ACTION_MOVE" "1 << 0") '("resize" "WNCK_WINDOW_ACTION_RESIZE" "1 << 1") '("shade" "WNCK_WINDOW_ACTION_SHADE" "1 << 2") '("stick" "WNCK_WINDOW_ACTION_STICK" "1 << 3") '("maximize-horizontally" "WNCK_WINDOW_ACTION_MAXIMIZE_HORIZONTALLY" "1 << 4") '("maximize-vertically" "WNCK_WINDOW_ACTION_MAXIMIZE_VERTICALLY" "1 << 5") '("change-workspace" "WNCK_WINDOW_ACTION_CHANGE_WORKSPACE" "1 << 6") '("close" "WNCK_WINDOW_ACTION_CLOSE" "1 << 7") '("unmaximize-horizontally" "WNCK_WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY" "1 << 8") '("unmaximize-vertically" "WNCK_WINDOW_ACTION_UNMAXIMIZE_VERTICALLY" "1 << 9") '("unshade" "WNCK_WINDOW_ACTION_UNSHADE" "1 << 10") '("unstick" "WNCK_WINDOW_ACTION_UNSTICK" "1 << 11") '("minimize" "WNCK_WINDOW_ACTION_MINIMIZE" "1 << 12") '("unminimize" "WNCK_WINDOW_ACTION_UNMINIMIZE" "1 << 13") '("maximize" "WNCK_WINDOW_ACTION_MAXIMIZE" "1 << 14") '("unmaximize" "WNCK_WINDOW_ACTION_UNMAXIMIZE" "1 << 15") '("fullscreen" "WNCK_WINDOW_ACTION_FULLSCREEN" "1 << 16") '("above" "WNCK_WINDOW_ACTION_ABOVE" "1 << 17") '("below" "WNCK_WINDOW_ACTION_BELOW" "1 << 18") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_WINDOW_NORMAL, /* document/app window */ ;; WNCK_WINDOW_DESKTOP, /* desktop background */ ;; WNCK_WINDOW_DOCK, /* panel */ ;; WNCK_WINDOW_DIALOG, /* dialog */ ;; WNCK_WINDOW_TOOLBAR, /* tearoff toolbar */ ;; WNCK_WINDOW_MENU, /* tearoff menu */ ;; WNCK_WINDOW_UTILITY, /* palette/toolbox window */ ;; WNCK_WINDOW_SPLASHSCREEN /* splash screen */ ;; } WnckWindowType; (define-enum-extended WindowType (in-module "Wnck") (c-name "WnckWindowType") (values '("normal" "WNCK_WINDOW_NORMAL" "0") '("desktop" "WNCK_WINDOW_DESKTOP" "1") '("dock" "WNCK_WINDOW_DOCK" "2") '("dialog" "WNCK_WINDOW_DIALOG" "3") '("toolbar" "WNCK_WINDOW_TOOLBAR" "4") '("menu" "WNCK_WINDOW_MENU" "5") '("utility" "WNCK_WINDOW_UTILITY" "6") '("splashscreen" "WNCK_WINDOW_SPLASHSCREEN" "7") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_WINDOW_GRAVITY_CURRENT = 0, ;; WNCK_WINDOW_GRAVITY_NORTHWEST = 1, ;; WNCK_WINDOW_GRAVITY_NORTH = 2, ;; WNCK_WINDOW_GRAVITY_NORTHEAST = 3, ;; WNCK_WINDOW_GRAVITY_WEST = 4, ;; WNCK_WINDOW_GRAVITY_CENTER = 5, ;; WNCK_WINDOW_GRAVITY_EAST = 6, ;; WNCK_WINDOW_GRAVITY_SOUTHWEST = 7, ;; WNCK_WINDOW_GRAVITY_SOUTH = 8, ;; WNCK_WINDOW_GRAVITY_SOUTHEAST = 9, ;; WNCK_WINDOW_GRAVITY_STATIC = 10 ;; } WnckWindowGravity; (define-enum-extended WindowGravity (in-module "Wnck") (c-name "WnckWindowGravity") (values '("current" "WNCK_WINDOW_GRAVITY_CURRENT" "0") '("northwest" "WNCK_WINDOW_GRAVITY_NORTHWEST" "1") '("north" "WNCK_WINDOW_GRAVITY_NORTH" "2") '("northeast" "WNCK_WINDOW_GRAVITY_NORTHEAST" "3") '("west" "WNCK_WINDOW_GRAVITY_WEST" "4") '("center" "WNCK_WINDOW_GRAVITY_CENTER" "5") '("east" "WNCK_WINDOW_GRAVITY_EAST" "6") '("southwest" "WNCK_WINDOW_GRAVITY_SOUTHWEST" "7") '("south" "WNCK_WINDOW_GRAVITY_SOUTH" "8") '("southeast" "WNCK_WINDOW_GRAVITY_SOUTHEAST" "9") '("static" "WNCK_WINDOW_GRAVITY_STATIC" "10") ) ) ;; Original typedef: ;; typedef enum ;; { ;; WNCK_WINDOW_CHANGE_X = 1 << 0, ;; WNCK_WINDOW_CHANGE_Y = 1 << 1, ;; WNCK_WINDOW_CHANGE_WIDTH = 1 << 2, ;; WNCK_WINDOW_CHANGE_HEIGHT = 1 << 3 ;; } WnckWindowMoveResizeMask; (define-flags-extended WindowMoveResizeMask (in-module "Wnck") (c-name "WnckWindowMoveResizeMask") (values '("x" "WNCK_WINDOW_CHANGE_X" "1 << 0") '("y" "WNCK_WINDOW_CHANGE_Y" "1 << 1") '("width" "WNCK_WINDOW_CHANGE_WIDTH" "1 << 2") '("height" "WNCK_WINDOW_CHANGE_HEIGHT" "1 << 3") ) ) libwnckmm-1.0-0.1.1/wnck/src/Makefile.am0000644000175000017500000000212312257316157017516 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . binding_name = wnckmm wrap_init_flags = --namespace=Wnck --parent_dir=wnckmm codegen_srcdir = $(top_srcdir)/tools include $(srcdir)/filelist.am include $(top_srcdir)/tools/m4/filelist.am files_defs = $(wnckmm_files_defs) files_ccg = $(wnckmm_files_ccg) files_hg = $(wnckmm_files_hg) include $(top_srcdir)/m4/generate-binding.am libwnckmm-1.0-0.1.1/wnck/src/tasklist.hg0000644000175000017500000000212712257640714017643 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(gtkmm/private/container_p.h) namespace Wnck { /** This represents a tasklist. */ class Tasklist : public Gtk::Container { _CLASS_GTKOBJECT(Tasklist, WnckTasklist, WNCK_TASKLIST, Gtk::Container, GtkContainer) protected: public: // FIXME: TODO: }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/selector.hg0000644000175000017500000000216012257640651017622 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(gtkmm/private/menubar_p.h) namespace Wnck { /** This represents a workspace. */ class Selector : public Gtk::MenuBar { _CLASS_GTKOBJECT(Selector, WnckSelector, WNCK_SELECTOR, Gtk::MenuBar, GtkMenuBar) public: /** Creates a selector menu */ explicit Selector(); }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/pager.ccg0000644000175000017500000000175512257640677017257 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { Pager::Pager(const Screen* screen) : Gtk::Widget((GtkWidget*)wnck_pager_new(const_cast(screen->gobj()))) { } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/action-menu.ccg0000644000175000017500000000202012257625401020346 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include namespace Wnck { ActionMenu::ActionMenu(const Window* window) : Gtk::Menu((GtkMenu*)wnck_action_menu_new(const_cast(window->gobj()))) { } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/window.ccg0000644000175000017500000000362012257633646017457 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include #include #include namespace Wnck { Gdk::Rectangle Window::get_client_geometry() const { int x, y, width, height; wnck_window_get_client_window_geometry(const_cast(gobj()), &x, &y, &width, &height); return Gdk::Rectangle(x, y, width, height); } Gdk::Rectangle Window::get_geometry() const { int x, y, width, height; wnck_window_get_geometry(const_cast(gobj()), &x, &y, &width, &height); return Gdk::Rectangle(x, y, width, height); } void Window::set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom) { set_geometry(gravity, geometry_mask, geom.get_x(), geom.get_y(), geom.get_width(), geom.get_height()); } void Window::set_icon_geometry(const Gdk::Rectangle& geom) { set_icon_geometry(geom.get_x(), geom.get_y(), geom.get_width(), geom.get_height()); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/screen.hg0000644000175000017500000001057312257635625017275 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ _DEFS(wnckmm,wnck) _PINCLUDE(glibmm/private/object_p.h) _PINCLUDE(wnckmm/application.h) _PINCLUDE(wnckmm/class-group.h) _PINCLUDE(wnckmm/window.h) _PINCLUDE(wnckmm/workspace.h) namespace Wnck { class Application; class ClassGroup; class Window; class Workspace; /** This represents a screen. */ class Screen : public Glib::Object { _CLASS_WNCKOBJECT(Screen, WnckScreen, WNCK_SCREEN, Glib::Object, GObject) public: _WRAP_METHOD(static Screen* get_default(), wnck_screen_get_default) _WRAP_METHOD(static Screen* get(int index), wnck_screen_get) _WRAP_METHOD(static Screen* get_for_root(gulong root_id), wnck_screen_get_for_root) _WRAP_METHOD(int get_number() const, wnck_screen_get_number) _WRAP_METHOD(int get_width() const, wnck_screen_get_width) _WRAP_METHOD(int get_height() const, wnck_screen_get_height) _WRAP_METHOD(void force_update(), wnck_screen_force_update) _WRAP_METHOD(std::string get_window_manager_name(), wnck_screen_get_window_manager_name) _WRAP_METHOD(bool net_wm_supports(const std::string& atom), wnck_screen_net_wm_supports) _WRAP_METHOD(Window* get_active_window() const, wnck_screen_get_active_window) _WRAP_METHOD(Window* get_previously_active_window() const, wnck_screen_get_previously_active_window) #m4 dnl // The default behaviour is wrong. #m4 _CONVERSION(`GList*', `Glib::ListHandle', `$2($3, Glib::OWNERSHIP_NONE)') _WRAP_METHOD(Glib::ListHandle get_windows() const, wnck_screen_get_windows) _WRAP_METHOD(Glib::ListHandle get_windows_stacked() const, wnck_screen_get_windows_stacked) _WRAP_METHOD(Workspace* get_active_workspace() const, wnck_screen_get_active_workspace) // TODO: get_workspaces _WRAP_METHOD(Workspace* get_workspace(int workspace) const, wnck_screen_get_workspace) _WRAP_METHOD(int get_workspace_count() const, wnck_screen_get_workspace_count) _WRAP_METHOD(void set_workspace_count(int count) const, wnck_screen_change_workspace_count) // TODO: wnck_screen_try_set_workspace_layout // TODO: wnck_screen_release_workspace_layout _WRAP_METHOD(void move_viewport(int x, int y) const, wnck_screen_move_viewport) _WRAP_METHOD(gulong get_background_pixmap_xid() const, wnck_screen_get_background_pixmap) _WRAP_METHOD(bool is_showing_desktop() const, wnck_screen_is_showing_desktop) _WRAP_METHOD(void set_showing_desktop(bool show) const, wnck_screen_toggle_showing_desktop) _WRAP_SIGNAL(void active_window_changed(Window* previously_active_window), "active-window-changed") _WRAP_SIGNAL(void active_workspace_changed(Workspace* previously_active_workspace), "active-workspace-changed") _WRAP_SIGNAL(void application_closed(Application* app), "application-closed") _WRAP_SIGNAL(void application_opened(Application* app), "application-opened") _WRAP_SIGNAL(void backgroupnd_changed(), "background-changed") _WRAP_SIGNAL(void class_group_closed(ClassGroup* app), "class-group-closed") _WRAP_SIGNAL(void class_group_opened(ClassGroup* app), "class-group-opened") _WRAP_SIGNAL(void showing_desktop_changed(), "showing-desktop-changed") _WRAP_SIGNAL(void viewports_changed(), "viewports-changed") _WRAP_SIGNAL(void window_opened(Window* window), "window-opened") _WRAP_SIGNAL(void window_closed(Window* window), "window-closed") _WRAP_SIGNAL(void window_manager_changed(), "window-manager-changed") _WRAP_SIGNAL(void window_stacking_changed(), "window-stacking-changed") _WRAP_SIGNAL(void workspace_created(Workspace* workspace), "workspace-created") _WRAP_SIGNAL(void workspace_destroyed(Workspace* workspace), "workspace-destroyed") }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/screen.ccg0000644000175000017500000000161412257625530017421 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include namespace Wnck { } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/Makefile.in0000664000175000017500000004072212414127605017531 0ustar00execexec00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/filelist.am $(top_srcdir)/tools/m4/filelist.am \ $(top_srcdir)/m4/generate-binding.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(dist_noinst_DATA) subdir = wnck/src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(dist_noinst_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOCINSTALL_FLAGS = @DOCINSTALL_FLAGS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DOXYGEN_TAGFILES = @DOXYGEN_TAGFILES@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GMMPROC_DIR = @GMMPROC_DIR@ GMMPROC_EXTRA_M4_DIR = @GMMPROC_EXTRA_M4_DIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBWNCKMM_SO_VERSION = @LIBWNCKMM_SO_VERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MMDOCTOOLDIR = @MMDOCTOOLDIR@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WNCKMM_API_VERSION = @WNCKMM_API_VERSION@ WNCKMM_CFLAGS = @WNCKMM_CFLAGS@ WNCKMM_LIBS = @WNCKMM_LIBS@ WNCKMM_MAJOR_VERSION = @WNCKMM_MAJOR_VERSION@ WNCKMM_MICRO_VERSION = @WNCKMM_MICRO_VERSION@ WNCKMM_MINOR_VERSION = @WNCKMM_MINOR_VERSION@ WNCKMM_MODULES = @WNCKMM_MODULES@ WNCKMM_MODULE_NAME = @WNCKMM_MODULE_NAME@ WNCKMM_VERSION = @WNCKMM_VERSION@ WNCK_CFLAGS = @WNCK_CFLAGS@ WNCK_LIBS = @WNCK_LIBS@ XSLTPROC = @XSLTPROC@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ binding_name = wnckmm wrap_init_flags = --namespace=Wnck --parent_dir=wnckmm codegen_srcdir = $(top_srcdir)/tools wnckmm_files_defs = \ wnck.defs \ wnck_enums.defs \ wnck_methods.defs \ wnck_signals.defs wnckmm_files_hg = \ action-menu.hg \ application.hg \ class-group.hg \ pager.hg \ screen.hg \ selector.hg \ tasklist.hg \ window.hg \ workspace.hg wnckmm_files_ccg = $(wnckmm_files_hg:.hg=.ccg) files_codegen_m4 = \ convert.m4 \ convert_wnckmm.m4 \ class_wnckobject.m4 files_defs = $(wnckmm_files_defs) files_ccg = $(wnckmm_files_ccg) files_hg = $(wnckmm_files_hg) # Additional built sources not generated by gmmproc. other_built_sources = $(binding_outputdir)/wrap_init.cc # Where to put the stamp files for the gmmproc output. binding_stampdir = $(srcdir)/.stamps # Lists of qualified file names relative to the current directory. binding_relfiles_m4 = $(addprefix $(codegen_m4_srcdir)/,$(files_codegen_m4)) binding_relfiles_hg = $(addprefix $(srcdir)/,$(files_hg)) binding_stampfiles = $(patsubst %.hg,$(binding_stampdir)/%.stamp,$(files_hg)) # Distributed code generation source files. dist_noinst_DATA = $(files_defs) $(files_hg) $(files_ccg) # Delete stamps on make maintainer-clean. The other generated source # files are deleted by the make rules for the output directory. MAINTAINERCLEANFILES = $(binding_stampdir)/*.stamp # Dependencies of the gmmproc code generator targets. gmmproc_dependencies = $(binding_relfiles_m4) $(files_defs) codegen_m4_flags = $(addprefix -I , $(codegen_m4_srcdir) $(GMMPROC_EXTRA_M4_DIR)) # Automatically created output directories. binding_mkdirs = $(binding_stampdir) $(binding_outputdir)/private # Show names of generated files in silent rules output. mm_0_gen = @echo ' GEN $(binding_outputdir)/{$*.cc,$*.h,private/$*_p.h}'; mm_v_gen = $(if $(filter 0,$(or $(V),$(AM_DEFAULT_VERBOSITY))),$(mm_0_gen)) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/filelist.am $(top_srcdir)/tools/m4/filelist.am $(top_srcdir)/m4/generate-binding.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign wnck/src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign wnck/src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(srcdir)/filelist.am $(top_srcdir)/tools/m4/filelist.am $(top_srcdir)/m4/generate-binding.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am all-local check check-am clean clean-generic \ clean-libtool cscopelist-am ctags-am distclean \ distclean-generic distclean-libtool distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am # Location of the module's gmmproc support files. codegen_srcdir ?= $(top_srcdir)/codegen # Location of the module's gmmproc M4 files, # and of any extra m4 files from installed modules, # such as from gtkmm rather than just glibmm. # Use, for instance, this in configure.ac: # MM_PKG_CONFIG_SUBST([GMMPROC_EXTRA_M4_DIR], [--variable=gmmprocm4dir gtkmm-3.0]) codegen_m4_srcdir ?= $(codegen_srcdir)/m4 # Destination directory of the generated source files. binding_outputdir ?= $(if $(srcdir:.=),$(dir $(top_srcdir)/$(subdir)),../)$(binding_name) # Default command lines for running the code generators. gmmproc ?= $(PERL) -I"$(GMMPROC_DIR)/pm" -- "$(GMMPROC_DIR)/gmmproc" gen_wrap_init ?= $(PERL) -- "$(GMMPROC_DIR)/generate_wrap_init.pl" gmmproc_flags ?= $(codegen_m4_flags) --defs $(srcdir) # Declare the built sources main targets. all-local: $(binding_stampfiles) $(other_built_sources) # Create the output directories if they do not exist already. $(binding_mkdirs): $(AM_V_at)$(MKDIR_P) $@ # NOTE : generation of wrap_init.cc is disabled # Generate the wrap_init.cc file using generate_wrap_init.pl. #$(binding_outputdir)/wrap_init.cc: $(binding_relfiles_hg) $(srcdir)/Makefile.in # $(AM_V_GEN)$(gen_wrap_init) $(wrap_init_flags) $(binding_relfiles_hg) >$@ # Run the gmmproc code generator to produce the C++ binding code. $(binding_stampdir)/%.stamp: %.hg %.ccg $(gmmproc_dependencies) | $(binding_mkdirs) @: >$@ $(mm_v_gen)$(gmmproc) $(gmmproc_flags) $* $(srcdir) $(binding_outputdir) # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libwnckmm-1.0-0.1.1/wnck/src/window.hg0000644000175000017500000001766412267420437017327 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(glibmm/private/object_p.h) _PINCLUDE(wnckmm/libwnck-wrapper.h) namespace Wnck { _WRAP_ENUM(WindowType, WnckWindowType) _WRAP_ENUM(WindowState, WnckWindowState) _WRAP_ENUM(WindowActions, WnckWindowActions) _WRAP_ENUM(WindowGravity, WnckWindowGravity) _WRAP_ENUM(WindowMoveResizeMask, WnckWindowMoveResizeMask) class Screen; class Application; class ClassGroup; class Workspace; /** This represents a workspace. */ class Window : public Glib::Object { _CLASS_WNCKOBJECT(Window, WnckWindow, WNCK_WINDOW, Glib::Object, GObject) protected: _CTOR_DEFAULT() public: _WRAP_METHOD(static Window* get_for_xid(gulong xid), wnck_window_get) _WRAP_METHOD(Screen* get_screen() const, wnck_window_get_screen) _WRAP_METHOD(bool has_name() const, wnck_window_has_name) _WRAP_METHOD(std::string get_name() const, wnck_window_get_name) _WRAP_METHOD(bool has_icon_name() const, wnck_window_has_icon_name) _WRAP_METHOD(std::string get_icon_name() const, wnck_window_get_icon_name) _WRAP_METHOD(bool is_icon_fallback() const, wnck_window_get_icon_is_fallback) // TODO: is pixbuf const?; _WRAP_METHOD(Glib::RefPtr get_icon() const, wnck_window_get_icon, refreturn) // TODO: is pixbuf const?; _WRAP_METHOD(Glib::RefPtr get_mini_icon() const, wnck_window_get_mini_icon, refreturn) _WRAP_METHOD(Application* get_application() const, wnck_window_get_application) _WRAP_METHOD(Window* get_transient() const, wnck_window_get_transient) _WRAP_METHOD(gulong get_group_leader() const, wnck_window_get_group_leader) _WRAP_METHOD(gulong get_xid() const, wnck_window_get_xid) _WRAP_METHOD(ClassGroup* get_class_group() const, wnck_window_get_class_group) _WRAP_METHOD(std::string get_session_id() const, wnck_window_get_session_id) _WRAP_METHOD(std::string get_session_id_utf8() const, wnck_window_get_session_id_utf8) _WRAP_METHOD(int get_pid() const, wnck_window_get_pid) _WRAP_METHOD(int get_sort_order() const, wnck_window_get_sort_order) _WRAP_METHOD(void set_sort_order(int order), wnck_window_set_sort_order) _WRAP_METHOD(WindowType get_window_type() const, wnck_window_get_window_type) _WRAP_METHOD(void set_window_type(WindowType order), wnck_window_set_window_type) _WRAP_METHOD(WindowState get_state() const, wnck_window_get_state) _WRAP_METHOD(bool is_minimized() const, wnck_window_is_minimized) _WRAP_METHOD(bool is_maximized_horizontally() const, wnck_window_is_maximized_horizontally) _WRAP_METHOD(bool is_maximized_vertically() const, wnck_window_is_maximized_vertically) _WRAP_METHOD(bool is_maximized() const, wnck_window_is_maximized) _WRAP_METHOD(bool is_shaded() const, wnck_window_is_shaded) _WRAP_METHOD(bool is_pinned() const, wnck_window_is_pinned) _WRAP_METHOD(bool is_sticky() const, wnck_window_is_sticky) _WRAP_METHOD(bool is_above() const, wnck_window_is_above) _WRAP_METHOD(bool is_below() const, wnck_window_is_below) _WRAP_METHOD(bool is_skip_pager() const, wnck_window_is_skip_pager) _WRAP_METHOD(bool is_skip_tasklist() const, wnck_window_is_skip_tasklist) _WRAP_METHOD(bool is_fullscreen() const, wnck_window_is_fullscreen) _WRAP_METHOD(bool is_needs_attention() const, wnck_window_needs_attention) _WRAP_METHOD(bool is_needs_attention_or_transient() const, wnck_window_or_transient_needs_attention) _WRAP_METHOD(WindowActions get_actions() const, wnck_window_get_actions) _WRAP_METHOD(void minimize(), wnck_window_minimize) _WRAP_METHOD(void unminimize(guint32 timestamp), wnck_window_minimize) _WRAP_METHOD(void maximize(), wnck_window_maximize) _WRAP_METHOD(void unmaximize(), wnck_window_unmaximize) _WRAP_METHOD(void maximize_vertically(), wnck_window_maximize_vertically) _WRAP_METHOD(void unmaximize_vertically(), wnck_window_unmaximize_vertically) _WRAP_METHOD(void maximize_horizontally(), wnck_window_maximize_horizontally) _WRAP_METHOD(void unmaximize_horizontally(), wnck_window_unmaximize_horizontally) _WRAP_METHOD(void shade(), wnck_window_shade) _WRAP_METHOD(void unshade(), wnck_window_unshade) _WRAP_METHOD(void pin(), wnck_window_pin) _WRAP_METHOD(void unpin(), wnck_window_unpin) _WRAP_METHOD(void stick(), wnck_window_stick) _WRAP_METHOD(void unstick(), wnck_window_unstick) _WRAP_METHOD(void make_above(), wnck_window_make_above) _WRAP_METHOD(void unmake_above(), wnck_window_unmake_above) _WRAP_METHOD(void make_below(), wnck_window_make_below) _WRAP_METHOD(void unmake_below(), wnck_window_unmake_below) _WRAP_METHOD(void set_skip_pager(bool skip = true), wnck_window_set_skip_pager) _WRAP_METHOD(void set_skip_tasklist(bool skip = true), wnck_window_set_skip_tasklist) _WRAP_METHOD(void set_fullscreen(bool fullscreen = true), wnck_window_set_fullscreen) _WRAP_METHOD(void close(guint32 timestamp), wnck_window_close) _WRAP_METHOD(Workspace* get_workspace() const, wnck_window_get_workspace) _WRAP_METHOD(bool is_on_workspace(const Workspace* workspace) const, wnck_window_is_on_workspace) _WRAP_METHOD(bool is_visible_on_workspace(const Workspace* workspace) const, wnck_window_is_visible_on_workspace) _WRAP_METHOD(void move_to_workspace(const Workspace* workspace), wnck_window_move_to_workspace) _WRAP_METHOD(bool is_in_viewport(const Workspace* workspace) const, wnck_window_is_in_viewport) _WRAP_METHOD(void activate(guint32 timestamp), wnck_window_activate) _WRAP_METHOD(bool is_active() const, wnck_window_is_active) _WRAP_METHOD(bool is_most_recently_activated() const, wnck_window_is_most_recently_activated) _WRAP_METHOD(void activate_transient(guint32 timestamp), wnck_window_activate_transient) _WRAP_METHOD(bool is_transient_most_recently_activated() const, wnck_window_transient_is_most_recently_activated) _WRAP_METHOD(void set_icon_geometry(int x, int y, int width, int height), wnck_window_set_icon_geometry) // TODO: documentation void set_icon_geometry(const Gdk::Rectangle& geom); // TODO: documentation Gdk::Rectangle get_client_geometry() const; _IGNORE(wnck_window_get_client_window_geometry) // TODO: documentation Gdk::Rectangle get_geometry() const; _IGNORE(wnck_window_get_geometry) _WRAP_METHOD(void set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height), wnck_window_set_geometry) void set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom); _WRAP_METHOD(void keyboard_move(), wnck_window_keyboard_move) _WRAP_METHOD(void keyboard_size(), wnck_window_keyboard_size) _WRAP_SIGNAL(void actions_changed(WindowActions changed_mask, WindowActions new_state), "actions-changed") _WRAP_SIGNAL(void geometry_changed(), "geometry-changed") _WRAP_SIGNAL(void state_changed(WindowState changed_mask, WindowState new_state), "state-changed") _WRAP_SIGNAL(void workspace_changed(), "workspace-changed") _WRAP_SIGNAL(void icon_changed(), "icon-changed") _WRAP_SIGNAL(void name_changed(), "name-changed") }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/application.ccg0000644000175000017500000000155512257625510020447 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/pager.hg0000644000175000017500000000315312257640641017102 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(gtkmm/private/widget_p.h) namespace Wnck { class Screen; _WRAP_ENUM(PagerDisplayMode, WnckPagerDisplayMode) /** This represents a pager. */ class Pager : public Gtk::Widget { _CLASS_GTKOBJECT(Pager, WnckPager, WNCK_PAGER, Gtk::Widget, GtkWidget) public: /** Creates an action menu for a screen */ explicit Pager(const Screen* screen); _WRAP_METHOD(bool set_orientation(Gtk::Orientation orientation), wnck_pager_set_orientation) _WRAP_METHOD(bool set_row_count(int count), wnck_pager_set_n_rows) _WRAP_METHOD(void set_display_mode(PagerDisplayMode mode), wnck_pager_set_display_mode) _WRAP_METHOD(void set_show_all(bool show_all), wnck_pager_set_show_all) _WRAP_METHOD(void set_shadow_type(Gtk::ShadowType shadow_type), wnck_pager_set_shadow_type) }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/src/filelist.am0000644000175000017500000000107312257575614017624 0ustar00execexec00000000000000## This file is part of wnckmm. wnckmm_files_defs = \ wnck.defs \ wnck_enums.defs \ wnck_methods.defs \ wnck_signals.defs wnckmm_files_hg = \ action-menu.hg \ application.hg \ class-group.hg \ pager.hg \ screen.hg \ selector.hg \ tasklist.hg \ window.hg \ workspace.hg wnckmm_files_ccg = $(wnckmm_files_hg:.hg=.ccg) libwnckmm-1.0-0.1.1/wnck/src/application.hg0000644000175000017500000000434012267417004020302 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include _DEFS(wnckmm,wnck) _PINCLUDE(glibmm/private/object_p.h) namespace Wnck { class Window; /** This represents an application. */ class Application : public Glib::Object { _CLASS_WNCKOBJECT(Application, WnckApplication, WNCK_APPLICATION, Glib::Object, GObject) protected: _CTOR_DEFAULT() public: _WRAP_METHOD(static Window* get_for_xid(gulong xid), wnck_window_get) _WRAP_METHOD(gulong get_xid() const, wnck_application_get_xid) _WRAP_METHOD(std::string get_name() const, wnck_application_get_name) _WRAP_METHOD(int get_pid() const, wnck_application_get_pid) _WRAP_METHOD(int is_icon_fallback() const, wnck_application_get_icon_is_fallback) // TODO: is pixbuf const?; _WRAP_METHOD(Glib::RefPtr get_icon() const, wnck_application_get_icon, refreturn) // TODO: is pixbuf const?; _WRAP_METHOD(Glib::RefPtr get_mini_icon() const, wnck_application_get_mini_icon, refreturn) _WRAP_METHOD(std::string get_startup_id() const, wnck_application_get_startup_id) #m4 dnl // The default behaviour is wrong. #m4 _CONVERSION(`GList*', `Glib::ListHandle', `$2($3, Glib::OWNERSHIP_NONE)') _WRAP_METHOD(Glib::ListHandle get_windows() const, wnck_application_get_windows) _WRAP_METHOD(int get_window_count() const, wnck_application_get_n_windows) _WRAP_SIGNAL(void name_changed(), "name-changed") _WRAP_SIGNAL(void icon_changed(), "icon-changed") }; } //namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm.pc.in0000644000175000017500000000111612257561325017120 0ustar00execexec00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ datarootdir=@datarootdir@ datadir=@datadir@ includedir=@includedir@ docdir=${datarootdir}/doc/@WNCKMM_MODULE_NAME@ doxytagfile=${docdir}/reference/@WNCKMM_MODULE_NAME@.tag htmlrefdir=${docdir}/reference/html htmlrefpub=http://library.gnome.org/devel/@PACKAGE_TARNAME@/unstable/ Name: wnckmm Description: C++ binding for the WNCK library Version: @PACKAGE_VERSION@ URL: Requires: @WNCKMM_MODULES@ Libs: -L${libdir} -lwnckmm-@WNCKMM_API_VERSION@ Cflags: -I${includedir}/@WNCKMM_MODULE_NAME@ -I${libdir}/@WNCKMM_MODULE_NAME@/include libwnckmm-1.0-0.1.1/wnck/wnckmm.h0000644000175000017500000000214512257620621016336 0ustar00execexec00000000000000/* This file is part of wnckmm Copyright (C) 2013 Povilas Kanapickas This program is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 2.1 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this program. If not, see . */ #ifndef _WNCKMM_WNCKMM_H #define _WNCKMM_WNCKMM_H #include #include #include #include #include #include #include #include #include #include #endif libwnckmm-1.0-0.1.1/wnck/wnckmm/0000775000175000017500000000000012414127716016167 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/wnck/wnckmm/workspace.cc0000644000175000017500000001560012414127654020475 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { } // namespace Wnck namespace { static const Glib::SignalProxyInfo Workspace_signal_name_changed_info = { "name-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; } // anonymous namespace // static GType Glib::Value::value_type() { return wnck_motion_direction_get_type(); } namespace Glib { Wnck::Workspace* wrap(WnckWorkspace* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Workspace_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Workspace_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_workspace_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Workspace_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); klass->name_changed = &name_changed_callback; } void Workspace_Class::name_changed_callback(WnckWorkspace* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_name_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->name_changed) (*base->name_changed)(self); } Glib::ObjectBase* Workspace_Class::wrap_new(GObject* object) { return new Workspace((WnckWorkspace*)object); } Workspace::Workspace(const Glib::ConstructParams& construct_params) : Glib::Object(construct_params) { } Workspace::Workspace(WnckWorkspace* castitem) : Glib::Object((GObject*)(castitem)) {} Workspace::~Workspace() {} Workspace::CppClassType Workspace::workspace_class_; // initialize static member GType Workspace::get_type() { return workspace_class_.init().get_type(); } GType Workspace::get_base_type() { return wnck_workspace_get_type(); } Workspace::Workspace() : // Mark this class as non-derived to allow C++ vfuncs to be skipped. Glib::ObjectBase(0), Glib::Object(Glib::ConstructParams(workspace_class_.init())) { } Screen* Workspace::get_screen() const { return Glib::wrap(wnck_workspace_get_screen(const_cast(gobj()))); } int Workspace::get_number() const { return wnck_workspace_get_number(const_cast(gobj())); } std::string Workspace::get_name() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_workspace_get_name(const_cast(gobj()))); } void Workspace::set_name(const std::string& name) const { wnck_workspace_change_name(const_cast(gobj()), name.c_str()); } int Workspace::get_width() const { return wnck_workspace_get_width(const_cast(gobj())); } int Workspace::get_height() const { return wnck_workspace_get_height(const_cast(gobj())); } int Workspace::get_viewport_x() const { return wnck_workspace_get_viewport_x(const_cast(gobj())); } int Workspace::get_viewport_y() const { return wnck_workspace_get_viewport_y(const_cast(gobj())); } bool Workspace::is_virtual() const { return wnck_workspace_is_virtual(const_cast(gobj())); } int Workspace::get_layout_row() const { return wnck_workspace_get_layout_row(const_cast(gobj())); } int Workspace::get_layout_column() const { return wnck_workspace_get_layout_column(const_cast(gobj())); } Workspace* Workspace::get_neighbor(MotionDirection direction) const { return Glib::wrap(wnck_workspace_get_neighbor(const_cast(gobj()), ((WnckMotionDirection)(direction)))); } void Workspace::activate(guint32 timestamp) { wnck_workspace_activate(gobj(), timestamp); } Glib::SignalProxy0< void > Workspace::signal_name_changed() { return Glib::SignalProxy0< void >(this, &Workspace_signal_name_changed_info); } void Wnck::Workspace::on_name_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->name_changed) (*base->name_changed)(gobj()); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/selector.cc0000644000175000017500000000545712414127654020330 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { Selector::Selector() : Gtk::MenuBar((GtkMenuBar*)wnck_selector_new()) { } } // namespace Wnck namespace { } // anonymous namespace namespace Glib { Wnck::Selector* wrap(WnckSelector* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Selector_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Selector_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_selector_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Selector_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); } Glib::ObjectBase* Selector_Class::wrap_new(GObject* o) { return manage(new Selector((WnckSelector*)(o))); } /* The implementation: */ Selector::Selector(const Glib::ConstructParams& construct_params) : Gtk::MenuBar(construct_params) { } Selector::Selector(WnckSelector* castitem) : Gtk::MenuBar((GtkMenuBar*)(castitem)) { } Selector::~Selector() { destroy_(); } Selector::CppClassType Selector::selector_class_; // initialize static member GType Selector::get_type() { return selector_class_.init().get_type(); } GType Selector::get_base_type() { return wnck_selector_get_type(); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/libwnck-wrapper.h0000644000175000017500000000163312267417371021455 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #ifndef LIBWNCKMM_LIBWNCK_WRAPPER_H #define LIBWNCKMM_LIBWNCK_WRAPPER_H #define WNCK_I_KNOW_THIS_IS_UNSTABLE #include #endif libwnckmm-1.0-0.1.1/wnck/wnckmm/wrap_init.h0000644000175000017500000000172712257577451020353 0ustar00execexec00000000000000#ifndef _WNCKMM_WRAP_INIT_H #define _WNCKMM_WRAP_INIT_H /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ // wrap_init.cc is generated by tools/generate_wrap_init.pl namespace Wnck { void wrap_init(); } /* namespace Wnck */ #endif // _GDKMM_WRAP_INIT_H libwnckmm-1.0-0.1.1/wnck/wnckmm/tasklist.cc0000644000175000017500000000534612414127654020343 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { } // namespace Wnck namespace { } // anonymous namespace namespace Glib { Wnck::Tasklist* wrap(WnckTasklist* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Tasklist_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Tasklist_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_tasklist_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Tasklist_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); } Glib::ObjectBase* Tasklist_Class::wrap_new(GObject* o) { return manage(new Tasklist((WnckTasklist*)(o))); } /* The implementation: */ Tasklist::Tasklist(const Glib::ConstructParams& construct_params) : Gtk::Container(construct_params) { } Tasklist::Tasklist(WnckTasklist* castitem) : Gtk::Container((GtkContainer*)(castitem)) { } Tasklist::~Tasklist() { destroy_(); } Tasklist::CppClassType Tasklist::tasklist_class_; // initialize static member GType Tasklist::get_type() { return tasklist_class_.init().get_type(); } GType Tasklist::get_base_type() { return wnck_tasklist_get_type(); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/application.cc0000644000175000017500000002210312414127653020775 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { } // namespace Wnck namespace { static const Glib::SignalProxyInfo Application_signal_name_changed_info = { "name-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static const Glib::SignalProxyInfo Application_signal_icon_changed_info = { "icon-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; } // anonymous namespace namespace Glib { Wnck::Application* wrap(WnckApplication* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Application_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Application_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_application_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Application_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); klass->name_changed = &name_changed_callback; klass->icon_changed = &icon_changed_callback; } void Application_Class::name_changed_callback(WnckApplication* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_name_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->name_changed) (*base->name_changed)(self); } void Application_Class::icon_changed_callback(WnckApplication* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_icon_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->icon_changed) (*base->icon_changed)(self); } Glib::ObjectBase* Application_Class::wrap_new(GObject* object) { return new Application((WnckApplication*)object); } Application::Application(const Glib::ConstructParams& construct_params) : Glib::Object(construct_params) { } Application::Application(WnckApplication* castitem) : Glib::Object((GObject*)(castitem)) {} Application::~Application() {} Application::CppClassType Application::application_class_; // initialize static member GType Application::get_type() { return application_class_.init().get_type(); } GType Application::get_base_type() { return wnck_application_get_type(); } Application::Application() : // Mark this class as non-derived to allow C++ vfuncs to be skipped. Glib::ObjectBase(0), Glib::Object(Glib::ConstructParams(application_class_.init())) { } Window* Application::get_for_xid(gulong xid) { return Glib::wrap(wnck_window_get(xid)); } gulong Application::get_xid() const { return wnck_application_get_xid(const_cast(gobj())); } std::string Application::get_name() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_application_get_name(const_cast(gobj()))); } int Application::get_pid() const { return wnck_application_get_pid(const_cast(gobj())); } int Application::is_icon_fallback() const { return wnck_application_get_icon_is_fallback(const_cast(gobj())); } Glib::RefPtr Application::get_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_application_get_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } Glib::RefPtr Application::get_mini_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_application_get_mini_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } std::string Application::get_startup_id() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_application_get_startup_id(const_cast(gobj()))); } Glib::ListHandle Application::get_windows() const { return Glib::ListHandle(wnck_application_get_windows(const_cast(gobj())), Glib::OWNERSHIP_NONE); } int Application::get_window_count() const { return wnck_application_get_n_windows(const_cast(gobj())); } Glib::SignalProxy0< void > Application::signal_name_changed() { return Glib::SignalProxy0< void >(this, &Application_signal_name_changed_info); } Glib::SignalProxy0< void > Application::signal_icon_changed() { return Glib::SignalProxy0< void >(this, &Application_signal_icon_changed_info); } void Wnck::Application::on_name_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->name_changed) (*base->name_changed)(gobj()); } void Wnck::Application::on_icon_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->icon_changed) (*base->icon_changed)(gobj()); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/workspace.h0000644000175000017500000001035712414127654020343 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_WORKSPACE_H #define _WNCKMM_WORKSPACE_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckWorkspace WnckWorkspace; typedef struct _WnckWorkspaceClass WnckWorkspaceClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Workspace_Class; } // namespace Wnck namespace Wnck { class Screen; /** @addtogroup wnckmmEnums wnckmm Enums and Flags */ /** * * @ingroup wnckmmEnums */ enum MotionDirection { MOTION_UP = -1, MOTION_DOWN = -2, MOTION_LEFT = -3, MOTION_RIGHT = -4 }; } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Enum { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** This represents a workspace. */ class Workspace : public Glib::Object { #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef Workspace CppObjectType; typedef Workspace_Class CppClassType; typedef WnckWorkspace BaseObjectType; typedef WnckWorkspaceClass BaseClassType; private: friend class Workspace_Class; static CppClassType workspace_class_; private: // noncopyable Workspace(const Workspace&); Workspace& operator=(const Workspace&); protected: explicit Workspace(const Glib::ConstructParams& construct_params); explicit Workspace(WnckWorkspace* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: virtual ~Workspace(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. WnckWorkspace* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GObject. const WnckWorkspace* gobj() const { return reinterpret_cast(gobject_); } private: protected: Workspace(); public: Screen* get_screen() const; int get_number() const; std::string get_name() const; void set_name(const std::string& name) const; int get_width() const; int get_height() const; int get_viewport_x() const; int get_viewport_y() const; bool is_virtual() const; int get_layout_row() const; int get_layout_column() const; Workspace* get_neighbor(MotionDirection direction) const; void activate(guint32 timestamp); /** * @par Slot Prototype: * void on_my_%name_changed() * */ Glib::SignalProxy0< void > signal_name_changed(); public: public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: /// This is a default handler for the signal signal_name_changed(). virtual void on_name_changed(); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Workspace */ Wnck::Workspace* wrap(WnckWorkspace* object, bool take_copy = false); } #endif /* _WNCKMM_WORKSPACE_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/action-menu.h0000644000175000017500000000622412414127653020561 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_ACTION_MENU_H #define _WNCKMM_ACTION_MENU_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckActionMenu WnckActionMenu; typedef struct _WnckActionMenuClass WnckActionMenuClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class ActionMenu_Class; } // namespace Wnck namespace Wnck { class Window; /** This represents an action menu. */ class ActionMenu : public Gtk::Menu { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef ActionMenu CppObjectType; typedef ActionMenu_Class CppClassType; typedef WnckActionMenu BaseObjectType; typedef WnckActionMenuClass BaseClassType; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ virtual ~ActionMenu(); #ifndef DOXYGEN_SHOULD_SKIP_THIS private: friend class ActionMenu_Class; static CppClassType actionmenu_class_; // noncopyable ActionMenu(const ActionMenu&); ActionMenu& operator=(const ActionMenu&); protected: explicit ActionMenu(const Glib::ConstructParams& construct_params); explicit ActionMenu(WnckActionMenu* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_type() G_GNUC_CONST; static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GtkObject. WnckActionMenu* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GtkObject. const WnckActionMenu* gobj() const { return reinterpret_cast(gobject_); } public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: private: public: /** Creates an action menu for a window */ explicit ActionMenu(const Window* window); // TODO: signals }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::ActionMenu */ Wnck::ActionMenu* wrap(WnckActionMenu* object, bool take_copy = false); } //namespace Glib #endif /* _WNCKMM_ACTION_MENU_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/init.h0000644000175000017500000000164712257601232017304 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #ifndef LIBWNCKMM_INIT_H #define LIBWNCKMM_INIT_H namespace Wnck { /** Initializes the wnckmm library */ void init(); } // namespace Wnck #endif libwnckmm-1.0-0.1.1/wnck/wnckmm/Makefile.am0000644000175000017500000000303312257325162020220 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . lib_LTLIBRARIES = libwnckmm-@WNCKMM_API_VERSION@.la include $(srcdir)/../src/filelist.am include $(srcdir)/filelist.am files_built_cc = $(wnckmm_files_built_cc) files_built_h = $(wnckmm_files_built_h) files_built_ph = $(wnckmm_files_built_ph) files_extra_cc = $(wnckmm_files_extra_cc) files_extra_h = $(wnckmm_files_extra_h) files_extra_ph = $(wnckmm_files_extra_ph) include $(top_srcdir)/m4/compile-binding.am local_cppflags = $(binding_includes) $(binding_cppflags) AM_CPPFLAGS = $(local_cppflags) $(GTHREAD_CFLAGS) $(WNCKMM_CFLAGS) AM_CXXFLAGS = $(WNCKMM_WXXFLAGS) libwnckmm_@WNCKMM_API_VERSION@_la_SOURCES = $(binding_sources) libwnckmm_@WNCKMM_API_VERSION@_la_LDFLAGS = -no-undefined -version-info $(LIBWNCKMM_SO_VERSION) libwnckmm_@WNCKMM_API_VERSION@_la_LIBADD = $(WNCKMM_LIBS) libwnckmm-1.0-0.1.1/wnck/wnckmm/window.h0000644000175000017500000004242512414127654017655 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_WINDOW_H #define _WNCKMM_WINDOW_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckWindow WnckWindow; typedef struct _WnckWindowClass WnckWindowClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Window_Class; } // namespace Wnck namespace Wnck { /** @addtogroup wnckmmEnums wnckmm Enums and Flags */ /** * * @ingroup wnckmmEnums */ enum WindowType { WINDOW_NORMAL, WINDOW_DESKTOP, WINDOW_DOCK, WINDOW_DIALOG, WINDOW_TOOLBAR, WINDOW_MENU, WINDOW_UTILITY, WINDOW_SPLASHSCREEN }; } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Enum { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** * * @ingroup wnckmmEnums * @par Bitwise operators: * %WindowState operator|(WindowState, WindowState)
* %WindowState operator&(WindowState, WindowState)
* %WindowState operator^(WindowState, WindowState)
* %WindowState operator~(WindowState)
* %WindowState& operator|=(WindowState&, WindowState)
* %WindowState& operator&=(WindowState&, WindowState)
* %WindowState& operator^=(WindowState&, WindowState)
*/ enum WindowState { WINDOW_STATE_MINIMIZED = 1 << 0, WINDOW_STATE_MAXIMIZED_HORIZONTALLY = 1 << 1, WINDOW_STATE_MAXIMIZED_VERTICALLY = 1 << 2, WINDOW_STATE_SHADED = 1 << 3, WINDOW_STATE_SKIP_PAGER = 1 << 4, WINDOW_STATE_SKIP_TASKLIST = 1 << 5, WINDOW_STATE_STICKY = 1 << 6, WINDOW_STATE_HIDDEN = 1 << 7, WINDOW_STATE_FULLSCREEN = 1 << 8, WINDOW_STATE_DEMANDS_ATTENTION = 1 << 9, WINDOW_STATE_URGENT = 1 << 10, WINDOW_STATE_ABOVE = 1 << 11, WINDOW_STATE_BELOW = 1 << 12 }; /** @ingroup wnckmmEnums */ inline WindowState operator|(WindowState lhs, WindowState rhs) { return static_cast(static_cast(lhs) | static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowState operator&(WindowState lhs, WindowState rhs) { return static_cast(static_cast(lhs) & static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowState operator^(WindowState lhs, WindowState rhs) { return static_cast(static_cast(lhs) ^ static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowState operator~(WindowState flags) { return static_cast(~static_cast(flags)); } /** @ingroup wnckmmEnums */ inline WindowState& operator|=(WindowState& lhs, WindowState rhs) { return (lhs = static_cast(static_cast(lhs) | static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowState& operator&=(WindowState& lhs, WindowState rhs) { return (lhs = static_cast(static_cast(lhs) & static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowState& operator^=(WindowState& lhs, WindowState rhs) { return (lhs = static_cast(static_cast(lhs) ^ static_cast(rhs))); } } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Flags { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** * * @ingroup wnckmmEnums * @par Bitwise operators: * %WindowActions operator|(WindowActions, WindowActions)
* %WindowActions operator&(WindowActions, WindowActions)
* %WindowActions operator^(WindowActions, WindowActions)
* %WindowActions operator~(WindowActions)
* %WindowActions& operator|=(WindowActions&, WindowActions)
* %WindowActions& operator&=(WindowActions&, WindowActions)
* %WindowActions& operator^=(WindowActions&, WindowActions)
*/ enum WindowActions { WINDOW_ACTION_MOVE = 1 << 0, WINDOW_ACTION_RESIZE = 1 << 1, WINDOW_ACTION_SHADE = 1 << 2, WINDOW_ACTION_STICK = 1 << 3, WINDOW_ACTION_MAXIMIZE_HORIZONTALLY = 1 << 4, WINDOW_ACTION_MAXIMIZE_VERTICALLY = 1 << 5, WINDOW_ACTION_CHANGE_WORKSPACE = 1 << 6, WINDOW_ACTION_CLOSE = 1 << 7, WINDOW_ACTION_UNMAXIMIZE_HORIZONTALLY = 1 << 8, WINDOW_ACTION_UNMAXIMIZE_VERTICALLY = 1 << 9, WINDOW_ACTION_UNSHADE = 1 << 10, WINDOW_ACTION_UNSTICK = 1 << 11, WINDOW_ACTION_MINIMIZE = 1 << 12, WINDOW_ACTION_UNMINIMIZE = 1 << 13, WINDOW_ACTION_MAXIMIZE = 1 << 14, WINDOW_ACTION_UNMAXIMIZE = 1 << 15, WINDOW_ACTION_FULLSCREEN = 1 << 16, WINDOW_ACTION_ABOVE = 1 << 17, WINDOW_ACTION_BELOW = 1 << 18 }; /** @ingroup wnckmmEnums */ inline WindowActions operator|(WindowActions lhs, WindowActions rhs) { return static_cast(static_cast(lhs) | static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowActions operator&(WindowActions lhs, WindowActions rhs) { return static_cast(static_cast(lhs) & static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowActions operator^(WindowActions lhs, WindowActions rhs) { return static_cast(static_cast(lhs) ^ static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowActions operator~(WindowActions flags) { return static_cast(~static_cast(flags)); } /** @ingroup wnckmmEnums */ inline WindowActions& operator|=(WindowActions& lhs, WindowActions rhs) { return (lhs = static_cast(static_cast(lhs) | static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowActions& operator&=(WindowActions& lhs, WindowActions rhs) { return (lhs = static_cast(static_cast(lhs) & static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowActions& operator^=(WindowActions& lhs, WindowActions rhs) { return (lhs = static_cast(static_cast(lhs) ^ static_cast(rhs))); } } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Flags { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** * * @ingroup wnckmmEnums */ enum WindowGravity { WINDOW_GRAVITY_CURRENT, WINDOW_GRAVITY_NORTHWEST, WINDOW_GRAVITY_NORTH, WINDOW_GRAVITY_NORTHEAST, WINDOW_GRAVITY_WEST, WINDOW_GRAVITY_CENTER, WINDOW_GRAVITY_EAST, WINDOW_GRAVITY_SOUTHWEST, WINDOW_GRAVITY_SOUTH, WINDOW_GRAVITY_SOUTHEAST, WINDOW_GRAVITY_STATIC }; } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Enum { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** * * @ingroup wnckmmEnums * @par Bitwise operators: * %WindowMoveResizeMask operator|(WindowMoveResizeMask, WindowMoveResizeMask)
* %WindowMoveResizeMask operator&(WindowMoveResizeMask, WindowMoveResizeMask)
* %WindowMoveResizeMask operator^(WindowMoveResizeMask, WindowMoveResizeMask)
* %WindowMoveResizeMask operator~(WindowMoveResizeMask)
* %WindowMoveResizeMask& operator|=(WindowMoveResizeMask&, WindowMoveResizeMask)
* %WindowMoveResizeMask& operator&=(WindowMoveResizeMask&, WindowMoveResizeMask)
* %WindowMoveResizeMask& operator^=(WindowMoveResizeMask&, WindowMoveResizeMask)
*/ enum WindowMoveResizeMask { WINDOW_CHANGE_X = 1 << 0, WINDOW_CHANGE_Y = 1 << 1, WINDOW_CHANGE_WIDTH = 1 << 2, WINDOW_CHANGE_HEIGHT = 1 << 3 }; /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask operator|(WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) { return static_cast(static_cast(lhs) | static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask operator&(WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) { return static_cast(static_cast(lhs) & static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask operator^(WindowMoveResizeMask lhs, WindowMoveResizeMask rhs) { return static_cast(static_cast(lhs) ^ static_cast(rhs)); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask operator~(WindowMoveResizeMask flags) { return static_cast(~static_cast(flags)); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask& operator|=(WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs) { return (lhs = static_cast(static_cast(lhs) | static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask& operator&=(WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs) { return (lhs = static_cast(static_cast(lhs) & static_cast(rhs))); } /** @ingroup wnckmmEnums */ inline WindowMoveResizeMask& operator^=(WindowMoveResizeMask& lhs, WindowMoveResizeMask rhs) { return (lhs = static_cast(static_cast(lhs) ^ static_cast(rhs))); } } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Flags { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Screen; class Application; class ClassGroup; class Workspace; /** This represents a workspace. */ class Window : public Glib::Object { #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef Window CppObjectType; typedef Window_Class CppClassType; typedef WnckWindow BaseObjectType; typedef WnckWindowClass BaseClassType; private: friend class Window_Class; static CppClassType window_class_; private: // noncopyable Window(const Window&); Window& operator=(const Window&); protected: explicit Window(const Glib::ConstructParams& construct_params); explicit Window(WnckWindow* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: virtual ~Window(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. WnckWindow* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GObject. const WnckWindow* gobj() const { return reinterpret_cast(gobject_); } private: protected: Window(); public: static Window* get_for_xid(gulong xid); Screen* get_screen() const; bool has_name() const; std::string get_name() const; bool has_icon_name() const; std::string get_icon_name() const; bool is_icon_fallback() const; // TODO: is pixbuf const?; Glib::RefPtr get_icon() const; // TODO: is pixbuf const?; Glib::RefPtr get_mini_icon() const; Application* get_application() const; Window* get_transient() const; gulong get_group_leader() const; gulong get_xid() const; ClassGroup* get_class_group() const; std::string get_session_id() const; std::string get_session_id_utf8() const; int get_pid() const; int get_sort_order() const; void set_sort_order(int order); WindowType get_window_type() const; void set_window_type(WindowType order); WindowState get_state() const; bool is_minimized() const; bool is_maximized_horizontally() const; bool is_maximized_vertically() const; bool is_maximized() const; bool is_shaded() const; bool is_pinned() const; bool is_sticky() const; bool is_above() const; bool is_below() const; bool is_skip_pager() const; bool is_skip_tasklist() const; bool is_fullscreen() const; bool is_needs_attention() const; bool is_needs_attention_or_transient() const; WindowActions get_actions() const; void minimize(); void unminimize(guint32 timestamp); void maximize(); void unmaximize(); void maximize_vertically(); void unmaximize_vertically(); void maximize_horizontally(); void unmaximize_horizontally(); void shade(); void unshade(); void pin(); void unpin(); void stick(); void unstick(); void make_above(); void unmake_above(); void make_below(); void unmake_below(); void set_skip_pager(bool skip = true); void set_skip_tasklist(bool skip = true); void set_fullscreen(bool fullscreen = true); void close(guint32 timestamp); Workspace* get_workspace() const; bool is_on_workspace(const Workspace* workspace) const; bool is_visible_on_workspace(const Workspace* workspace) const; void move_to_workspace(const Workspace* workspace); bool is_in_viewport(const Workspace* workspace) const; void activate(guint32 timestamp); bool is_active() const; bool is_most_recently_activated() const; void activate_transient(guint32 timestamp); bool is_transient_most_recently_activated() const; void set_icon_geometry(int x, int y, int width, int height); // TODO: documentation void set_icon_geometry(const Gdk::Rectangle& geom); // TODO: documentation Gdk::Rectangle get_client_geometry() const; // TODO: documentation Gdk::Rectangle get_geometry() const; void set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height); void set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom); void keyboard_move(); void keyboard_size(); /** * @par Slot Prototype: * void on_my_%actions_changed(WindowActions changed_mask, WindowActions new_state) * */ Glib::SignalProxy2< void,WindowActions,WindowActions > signal_actions_changed(); /** * @par Slot Prototype: * void on_my_%geometry_changed() * */ Glib::SignalProxy0< void > signal_geometry_changed(); /** * @par Slot Prototype: * void on_my_%state_changed(WindowState changed_mask, WindowState new_state) * */ Glib::SignalProxy2< void,WindowState,WindowState > signal_state_changed(); /** * @par Slot Prototype: * void on_my_%workspace_changed() * */ Glib::SignalProxy0< void > signal_workspace_changed(); /** * @par Slot Prototype: * void on_my_%icon_changed() * */ Glib::SignalProxy0< void > signal_icon_changed(); /** * @par Slot Prototype: * void on_my_%name_changed() * */ Glib::SignalProxy0< void > signal_name_changed(); public: public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: /// This is a default handler for the signal signal_actions_changed(). virtual void on_actions_changed(WindowActions changed_mask, WindowActions new_state); /// This is a default handler for the signal signal_geometry_changed(). virtual void on_geometry_changed(); /// This is a default handler for the signal signal_state_changed(). virtual void on_state_changed(WindowState changed_mask, WindowState new_state); /// This is a default handler for the signal signal_workspace_changed(). virtual void on_workspace_changed(); /// This is a default handler for the signal signal_icon_changed(). virtual void on_icon_changed(); /// This is a default handler for the signal signal_name_changed(). virtual void on_name_changed(); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Window */ Wnck::Window* wrap(WnckWindow* object, bool take_copy = false); } #endif /* _WNCKMM_WINDOW_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/action-menu.cc0000644000175000017500000000571412414127653020722 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include namespace Wnck { ActionMenu::ActionMenu(const Window* window) : Gtk::Menu((GtkMenu*)wnck_action_menu_new(const_cast(window->gobj()))) { } } // namespace Wnck namespace { } // anonymous namespace namespace Glib { Wnck::ActionMenu* wrap(WnckActionMenu* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& ActionMenu_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &ActionMenu_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_action_menu_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void ActionMenu_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); } Glib::ObjectBase* ActionMenu_Class::wrap_new(GObject* o) { return manage(new ActionMenu((WnckActionMenu*)(o))); } /* The implementation: */ ActionMenu::ActionMenu(const Glib::ConstructParams& construct_params) : Gtk::Menu(construct_params) { } ActionMenu::ActionMenu(WnckActionMenu* castitem) : Gtk::Menu((GtkMenu*)(castitem)) { } ActionMenu::~ActionMenu() { destroy_(); } ActionMenu::CppClassType ActionMenu::actionmenu_class_; // initialize static member GType ActionMenu::get_type() { return actionmenu_class_.init().get_type(); } GType ActionMenu::get_base_type() { return wnck_action_menu_get_type(); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/init.cc0000644000175000017500000000177712257601146017452 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { void init() { static volatile bool has_initialized = false; if (!has_initialized) { has_initialized = true; wrap_init(); } } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/application.h0000644000175000017500000001010312414127653020634 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_APPLICATION_H #define _WNCKMM_APPLICATION_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckApplication WnckApplication; typedef struct _WnckApplicationClass WnckApplicationClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Application_Class; } // namespace Wnck namespace Wnck { class Window; /** This represents an application. */ class Application : public Glib::Object { #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef Application CppObjectType; typedef Application_Class CppClassType; typedef WnckApplication BaseObjectType; typedef WnckApplicationClass BaseClassType; private: friend class Application_Class; static CppClassType application_class_; private: // noncopyable Application(const Application&); Application& operator=(const Application&); protected: explicit Application(const Glib::ConstructParams& construct_params); explicit Application(WnckApplication* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: virtual ~Application(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. WnckApplication* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GObject. const WnckApplication* gobj() const { return reinterpret_cast(gobject_); } private: protected: Application(); public: static Window* get_for_xid(gulong xid); gulong get_xid() const; std::string get_name() const; int get_pid() const; int is_icon_fallback() const; // TODO: is pixbuf const?; Glib::RefPtr get_icon() const; // TODO: is pixbuf const?; Glib::RefPtr get_mini_icon() const; std::string get_startup_id() const; Glib::ListHandle get_windows() const; int get_window_count() const; /** * @par Slot Prototype: * void on_my_%name_changed() * */ Glib::SignalProxy0< void > signal_name_changed(); /** * @par Slot Prototype: * void on_my_%icon_changed() * */ Glib::SignalProxy0< void > signal_icon_changed(); public: public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: /// This is a default handler for the signal signal_name_changed(). virtual void on_name_changed(); /// This is a default handler for the signal signal_icon_changed(). virtual void on_icon_changed(); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Application */ Wnck::Application* wrap(WnckApplication* object, bool take_copy = false); } #endif /* _WNCKMM_APPLICATION_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/screen.h0000644000175000017500000002105412414127653017617 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_SCREEN_H #define _WNCKMM_SCREEN_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckScreen WnckScreen; typedef struct _WnckScreenClass WnckScreenClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Screen_Class; } // namespace Wnck namespace Wnck { class Application; class ClassGroup; class Window; class Workspace; /** This represents a screen. */ class Screen : public Glib::Object { #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef Screen CppObjectType; typedef Screen_Class CppClassType; typedef WnckScreen BaseObjectType; typedef WnckScreenClass BaseClassType; private: friend class Screen_Class; static CppClassType screen_class_; private: // noncopyable Screen(const Screen&); Screen& operator=(const Screen&); protected: explicit Screen(const Glib::ConstructParams& construct_params); explicit Screen(WnckScreen* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: virtual ~Screen(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. WnckScreen* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GObject. const WnckScreen* gobj() const { return reinterpret_cast(gobject_); } private: public: static Screen* get_default(); static Screen* get(int index); static Screen* get_for_root(gulong root_id); int get_number() const; int get_width() const; int get_height() const; void force_update(); std::string get_window_manager_name(); bool net_wm_supports(const std::string& atom); Window* get_active_window() const; Window* get_previously_active_window() const; Glib::ListHandle get_windows() const; Glib::ListHandle get_windows_stacked() const; Workspace* get_active_workspace() const; // TODO: get_workspaces Workspace* get_workspace(int workspace) const; int get_workspace_count() const; void set_workspace_count(int count) const; // TODO: wnck_screen_try_set_workspace_layout // TODO: wnck_screen_release_workspace_layout void move_viewport(int x, int y) const; gulong get_background_pixmap_xid() const; //gtkmmproc error: wnck_screen_is_showing_desktop : method defs lookup failed (1) void set_showing_desktop(bool show) const; /** * @par Slot Prototype: * void on_my_%active_window_changed(Window* previously_active_window) * */ Glib::SignalProxy1< void,Window* > signal_active_window_changed(); /** * @par Slot Prototype: * void on_my_%active_workspace_changed(Workspace* previously_active_workspace) * */ Glib::SignalProxy1< void,Workspace* > signal_active_workspace_changed(); /** * @par Slot Prototype: * void on_my_%application_closed(Application* app) * */ Glib::SignalProxy1< void,Application* > signal_application_closed(); /** * @par Slot Prototype: * void on_my_%application_opened(Application* app) * */ Glib::SignalProxy1< void,Application* > signal_application_opened(); /** * @par Slot Prototype: * void on_my_%backgroupnd_changed() * */ Glib::SignalProxy0< void > signal_backgroupnd_changed(); /** * @par Slot Prototype: * void on_my_%class_group_closed(ClassGroup* app) * */ Glib::SignalProxy1< void,ClassGroup* > signal_class_group_closed(); /** * @par Slot Prototype: * void on_my_%class_group_opened(ClassGroup* app) * */ Glib::SignalProxy1< void,ClassGroup* > signal_class_group_opened(); /** * @par Slot Prototype: * void on_my_%showing_desktop_changed() * */ Glib::SignalProxy0< void > signal_showing_desktop_changed(); /** * @par Slot Prototype: * void on_my_%viewports_changed() * */ Glib::SignalProxy0< void > signal_viewports_changed(); /** * @par Slot Prototype: * void on_my_%window_opened(Window* window) * */ Glib::SignalProxy1< void,Window* > signal_window_opened(); /** * @par Slot Prototype: * void on_my_%window_closed(Window* window) * */ Glib::SignalProxy1< void,Window* > signal_window_closed(); /** * @par Slot Prototype: * void on_my_%window_manager_changed() * */ Glib::SignalProxy0< void > signal_window_manager_changed(); /** * @par Slot Prototype: * void on_my_%window_stacking_changed() * */ Glib::SignalProxy0< void > signal_window_stacking_changed(); /** * @par Slot Prototype: * void on_my_%workspace_created(Workspace* workspace) * */ Glib::SignalProxy1< void,Workspace* > signal_workspace_created(); /** * @par Slot Prototype: * void on_my_%workspace_destroyed(Workspace* workspace) * */ Glib::SignalProxy1< void,Workspace* > signal_workspace_destroyed(); public: public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: /// This is a default handler for the signal signal_active_window_changed(). virtual void on_active_window_changed(Window* previously_active_window); /// This is a default handler for the signal signal_active_workspace_changed(). virtual void on_active_workspace_changed(Workspace* previously_active_workspace); /// This is a default handler for the signal signal_application_closed(). virtual void on_application_closed(Application* app); /// This is a default handler for the signal signal_application_opened(). virtual void on_application_opened(Application* app); /// This is a default handler for the signal signal_backgroupnd_changed(). virtual void on_backgroupnd_changed(); /// This is a default handler for the signal signal_class_group_closed(). virtual void on_class_group_closed(ClassGroup* app); /// This is a default handler for the signal signal_class_group_opened(). virtual void on_class_group_opened(ClassGroup* app); /// This is a default handler for the signal signal_showing_desktop_changed(). virtual void on_showing_desktop_changed(); /// This is a default handler for the signal signal_viewports_changed(). virtual void on_viewports_changed(); /// This is a default handler for the signal signal_window_opened(). virtual void on_window_opened(Window* window); /// This is a default handler for the signal signal_window_closed(). virtual void on_window_closed(Window* window); /// This is a default handler for the signal signal_window_manager_changed(). virtual void on_window_manager_changed(); /// This is a default handler for the signal signal_window_stacking_changed(). virtual void on_window_stacking_changed(); /// This is a default handler for the signal signal_workspace_created(). virtual void on_workspace_created(Workspace* workspace); /// This is a default handler for the signal signal_workspace_destroyed(). virtual void on_workspace_destroyed(Workspace* workspace); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Screen */ Wnck::Screen* wrap(WnckScreen* object, bool take_copy = false); } #endif /* _WNCKMM_SCREEN_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/class-group.h0000644000175000017500000000721012414127653020575 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_CLASS_GROUP_H #define _WNCKMM_CLASS_GROUP_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckClassGroup WnckClassGroup; typedef struct _WnckClassGroupClass WnckClassGroupClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class ClassGroup_Class; } // namespace Wnck namespace Wnck { /** This represents a class group. */ class ClassGroup : public Glib::Object { #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef ClassGroup CppObjectType; typedef ClassGroup_Class CppClassType; typedef WnckClassGroup BaseObjectType; typedef WnckClassGroupClass BaseClassType; private: friend class ClassGroup_Class; static CppClassType classgroup_class_; private: // noncopyable ClassGroup(const ClassGroup&); ClassGroup& operator=(const ClassGroup&); protected: explicit ClassGroup(const Glib::ConstructParams& construct_params); explicit ClassGroup(WnckClassGroup* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: virtual ~ClassGroup(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. WnckClassGroup* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GObject. const WnckClassGroup* gobj() const { return reinterpret_cast(gobject_); } private: protected: ClassGroup(); public: static ClassGroup* get(const std::string& res_class); std::string get_res_class() const; std::string get_name() const; // TODO: is pixbuf const? Glib::RefPtr get_icon() const; // TODO: is pixbuf const? Glib::RefPtr get_mini_icon() const; // TODO: wnck_class_group_get_windows // The following two are not wrapped due to a bug in libwnck // (the signal definitions are wrong, see class-group.h) // _WRAP_SIGNAL(void name_changed(), "name-changed") // _WRAP_SIGNAL(void icon_changed(), "icon-changed") public: public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::ClassGroup */ Wnck::ClassGroup* wrap(WnckClassGroup* object, bool take_copy = false); } #endif /* _WNCKMM_CLASS_GROUP_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/window.cc0000644000175000017500000006733612414127654020023 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include #include #include namespace Wnck { Gdk::Rectangle Window::get_client_geometry() const { int x, y, width, height; wnck_window_get_client_window_geometry(const_cast(gobj()), &x, &y, &width, &height); return Gdk::Rectangle(x, y, width, height); } Gdk::Rectangle Window::get_geometry() const { int x, y, width, height; wnck_window_get_geometry(const_cast(gobj()), &x, &y, &width, &height); return Gdk::Rectangle(x, y, width, height); } void Window::set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, const Gdk::Rectangle& geom) { set_geometry(gravity, geometry_mask, geom.get_x(), geom.get_y(), geom.get_width(), geom.get_height()); } void Window::set_icon_geometry(const Gdk::Rectangle& geom) { set_icon_geometry(geom.get_x(), geom.get_y(), geom.get_width(), geom.get_height()); } } // namespace Wnck namespace { static void Window_signal_actions_changed_callback(WnckWindow* self, WnckWindowActions p0,WnckWindowActions p1,void* data) { using namespace Wnck; typedef sigc::slot< void,WindowActions,WindowActions > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(((WindowActions)(p0)) , ((WindowActions)(p1)) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Window_signal_actions_changed_info = { "actions-changed", (GCallback) &Window_signal_actions_changed_callback, (GCallback) &Window_signal_actions_changed_callback }; static const Glib::SignalProxyInfo Window_signal_geometry_changed_info = { "geometry-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static void Window_signal_state_changed_callback(WnckWindow* self, WnckWindowState p0,WnckWindowState p1,void* data) { using namespace Wnck; typedef sigc::slot< void,WindowState,WindowState > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(((WindowState)(p0)) , ((WindowState)(p1)) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Window_signal_state_changed_info = { "state-changed", (GCallback) &Window_signal_state_changed_callback, (GCallback) &Window_signal_state_changed_callback }; static const Glib::SignalProxyInfo Window_signal_workspace_changed_info = { "workspace-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static const Glib::SignalProxyInfo Window_signal_icon_changed_info = { "icon-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static const Glib::SignalProxyInfo Window_signal_name_changed_info = { "name-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; } // anonymous namespace // static GType Glib::Value::value_type() { return wnck_window_type_get_type(); } // static GType Glib::Value::value_type() { return wnck_window_state_get_type(); } // static GType Glib::Value::value_type() { return wnck_window_actions_get_type(); } // static GType Glib::Value::value_type() { return wnck_window_gravity_get_type(); } // static GType Glib::Value::value_type() { return wnck_window_move_resize_mask_get_type(); } namespace Glib { Wnck::Window* wrap(WnckWindow* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Window_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Window_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_window_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Window_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); klass->actions_changed = &actions_changed_callback; klass->geometry_changed = &geometry_changed_callback; klass->state_changed = &state_changed_callback; klass->workspace_changed = &workspace_changed_callback; klass->icon_changed = &icon_changed_callback; klass->name_changed = &name_changed_callback; } void Window_Class::actions_changed_callback(WnckWindow* self, WnckWindowActions p0, WnckWindowActions p1) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_actions_changed(((WindowActions)(p0)) , ((WindowActions)(p1)) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->actions_changed) (*base->actions_changed)(self, p0, p1); } void Window_Class::geometry_changed_callback(WnckWindow* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_geometry_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->geometry_changed) (*base->geometry_changed)(self); } void Window_Class::state_changed_callback(WnckWindow* self, WnckWindowState p0, WnckWindowState p1) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_state_changed(((WindowState)(p0)) , ((WindowState)(p1)) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->state_changed) (*base->state_changed)(self, p0, p1); } void Window_Class::workspace_changed_callback(WnckWindow* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_workspace_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->workspace_changed) (*base->workspace_changed)(self); } void Window_Class::icon_changed_callback(WnckWindow* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_icon_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->icon_changed) (*base->icon_changed)(self); } void Window_Class::name_changed_callback(WnckWindow* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_name_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->name_changed) (*base->name_changed)(self); } Glib::ObjectBase* Window_Class::wrap_new(GObject* object) { return new Window((WnckWindow*)object); } Window::Window(const Glib::ConstructParams& construct_params) : Glib::Object(construct_params) { } Window::Window(WnckWindow* castitem) : Glib::Object((GObject*)(castitem)) {} Window::~Window() {} Window::CppClassType Window::window_class_; // initialize static member GType Window::get_type() { return window_class_.init().get_type(); } GType Window::get_base_type() { return wnck_window_get_type(); } Window::Window() : // Mark this class as non-derived to allow C++ vfuncs to be skipped. Glib::ObjectBase(0), Glib::Object(Glib::ConstructParams(window_class_.init())) { } Window* Window::get_for_xid(gulong xid) { return Glib::wrap(wnck_window_get(xid)); } Screen* Window::get_screen() const { return Glib::wrap(wnck_window_get_screen(const_cast(gobj()))); } bool Window::has_name() const { return wnck_window_has_name(const_cast(gobj())); } std::string Window::get_name() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_window_get_name(const_cast(gobj()))); } bool Window::has_icon_name() const { return wnck_window_has_icon_name(const_cast(gobj())); } std::string Window::get_icon_name() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_window_get_icon_name(const_cast(gobj()))); } bool Window::is_icon_fallback() const { return wnck_window_get_icon_is_fallback(const_cast(gobj())); } Glib::RefPtr Window::get_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_window_get_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } Glib::RefPtr Window::get_mini_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_window_get_mini_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } Application* Window::get_application() const { return Glib::wrap(wnck_window_get_application(const_cast(gobj()))); } Window* Window::get_transient() const { return Glib::wrap(wnck_window_get_transient(const_cast(gobj()))); } gulong Window::get_group_leader() const { return wnck_window_get_group_leader(const_cast(gobj())); } gulong Window::get_xid() const { return wnck_window_get_xid(const_cast(gobj())); } ClassGroup* Window::get_class_group() const { return Glib::wrap(wnck_window_get_class_group(const_cast(gobj()))); } std::string Window::get_session_id() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_window_get_session_id(const_cast(gobj()))); } std::string Window::get_session_id_utf8() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_window_get_session_id_utf8(const_cast(gobj()))); } int Window::get_pid() const { return wnck_window_get_pid(const_cast(gobj())); } int Window::get_sort_order() const { return wnck_window_get_sort_order(const_cast(gobj())); } void Window::set_sort_order(int order) { wnck_window_set_sort_order(gobj(), order); } WindowType Window::get_window_type() const { return ((WindowType)(wnck_window_get_window_type(const_cast(gobj())))); } void Window::set_window_type(WindowType order) { wnck_window_set_window_type(gobj(), ((WnckWindowType)(order))); } WindowState Window::get_state() const { return ((WindowState)(wnck_window_get_state(const_cast(gobj())))); } bool Window::is_minimized() const { return wnck_window_is_minimized(const_cast(gobj())); } bool Window::is_maximized_horizontally() const { return wnck_window_is_maximized_horizontally(const_cast(gobj())); } bool Window::is_maximized_vertically() const { return wnck_window_is_maximized_vertically(const_cast(gobj())); } bool Window::is_maximized() const { return wnck_window_is_maximized(const_cast(gobj())); } bool Window::is_shaded() const { return wnck_window_is_shaded(const_cast(gobj())); } bool Window::is_pinned() const { return wnck_window_is_pinned(const_cast(gobj())); } bool Window::is_sticky() const { return wnck_window_is_sticky(const_cast(gobj())); } bool Window::is_above() const { return wnck_window_is_above(const_cast(gobj())); } bool Window::is_below() const { return wnck_window_is_below(const_cast(gobj())); } bool Window::is_skip_pager() const { return wnck_window_is_skip_pager(const_cast(gobj())); } bool Window::is_skip_tasklist() const { return wnck_window_is_skip_tasklist(const_cast(gobj())); } bool Window::is_fullscreen() const { return wnck_window_is_fullscreen(const_cast(gobj())); } bool Window::is_needs_attention() const { return wnck_window_needs_attention(const_cast(gobj())); } bool Window::is_needs_attention_or_transient() const { return wnck_window_or_transient_needs_attention(const_cast(gobj())); } WindowActions Window::get_actions() const { return ((WindowActions)(wnck_window_get_actions(const_cast(gobj())))); } void Window::minimize() { wnck_window_minimize(gobj()); } void Window::unminimize(guint32 timestamp) { wnck_window_minimize(gobj()); } void Window::maximize() { wnck_window_maximize(gobj()); } void Window::unmaximize() { wnck_window_unmaximize(gobj()); } void Window::maximize_vertically() { wnck_window_maximize_vertically(gobj()); } void Window::unmaximize_vertically() { wnck_window_unmaximize_vertically(gobj()); } void Window::maximize_horizontally() { wnck_window_maximize_horizontally(gobj()); } void Window::unmaximize_horizontally() { wnck_window_unmaximize_horizontally(gobj()); } void Window::shade() { wnck_window_shade(gobj()); } void Window::unshade() { wnck_window_unshade(gobj()); } void Window::pin() { wnck_window_pin(gobj()); } void Window::unpin() { wnck_window_unpin(gobj()); } void Window::stick() { wnck_window_stick(gobj()); } void Window::unstick() { wnck_window_unstick(gobj()); } void Window::make_above() { wnck_window_make_above(gobj()); } void Window::unmake_above() { wnck_window_unmake_above(gobj()); } void Window::make_below() { wnck_window_make_below(gobj()); } void Window::unmake_below() { wnck_window_unmake_below(gobj()); } void Window::set_skip_pager(bool skip) { wnck_window_set_skip_pager(gobj(), static_cast(skip)); } void Window::set_skip_tasklist(bool skip) { wnck_window_set_skip_tasklist(gobj(), static_cast(skip)); } void Window::set_fullscreen(bool fullscreen) { wnck_window_set_fullscreen(gobj(), static_cast(fullscreen)); } void Window::close(guint32 timestamp) { wnck_window_close(gobj(), timestamp); } Workspace* Window::get_workspace() const { return Glib::wrap(wnck_window_get_workspace(const_cast(gobj()))); } bool Window::is_on_workspace(const Workspace* workspace) const { return wnck_window_is_on_workspace(const_cast(gobj()), const_cast(workspace->gobj())); } bool Window::is_visible_on_workspace(const Workspace* workspace) const { return wnck_window_is_visible_on_workspace(const_cast(gobj()), const_cast(workspace->gobj())); } void Window::move_to_workspace(const Workspace* workspace) { wnck_window_move_to_workspace(gobj(), const_cast(workspace->gobj())); } bool Window::is_in_viewport(const Workspace* workspace) const { return wnck_window_is_in_viewport(const_cast(gobj()), const_cast(workspace->gobj())); } void Window::activate(guint32 timestamp) { wnck_window_activate(gobj(), timestamp); } bool Window::is_active() const { return wnck_window_is_active(const_cast(gobj())); } bool Window::is_most_recently_activated() const { return wnck_window_is_most_recently_activated(const_cast(gobj())); } void Window::activate_transient(guint32 timestamp) { wnck_window_activate_transient(gobj(), timestamp); } bool Window::is_transient_most_recently_activated() const { return wnck_window_transient_is_most_recently_activated(const_cast(gobj())); } void Window::set_icon_geometry(int x, int y, int width, int height) { wnck_window_set_icon_geometry(gobj(), x, y, width, height); } void Window::set_geometry(WindowGravity gravity, WindowMoveResizeMask geometry_mask, int x, int y, int width, int height) { wnck_window_set_geometry(gobj(), ((WnckWindowGravity)(gravity)), ((WnckWindowMoveResizeMask)(geometry_mask)), x, y, width, height); } void Window::keyboard_move() { wnck_window_keyboard_move(gobj()); } void Window::keyboard_size() { wnck_window_keyboard_size(gobj()); } Glib::SignalProxy2< void,WindowActions,WindowActions > Window::signal_actions_changed() { return Glib::SignalProxy2< void,WindowActions,WindowActions >(this, &Window_signal_actions_changed_info); } Glib::SignalProxy0< void > Window::signal_geometry_changed() { return Glib::SignalProxy0< void >(this, &Window_signal_geometry_changed_info); } Glib::SignalProxy2< void,WindowState,WindowState > Window::signal_state_changed() { return Glib::SignalProxy2< void,WindowState,WindowState >(this, &Window_signal_state_changed_info); } Glib::SignalProxy0< void > Window::signal_workspace_changed() { return Glib::SignalProxy0< void >(this, &Window_signal_workspace_changed_info); } Glib::SignalProxy0< void > Window::signal_icon_changed() { return Glib::SignalProxy0< void >(this, &Window_signal_icon_changed_info); } Glib::SignalProxy0< void > Window::signal_name_changed() { return Glib::SignalProxy0< void >(this, &Window_signal_name_changed_info); } void Wnck::Window::on_actions_changed(WindowActions changed_mask, WindowActions new_state) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->actions_changed) (*base->actions_changed)(gobj(),((WnckWindowActions)(changed_mask)),((WnckWindowActions)(new_state))); } void Wnck::Window::on_geometry_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->geometry_changed) (*base->geometry_changed)(gobj()); } void Wnck::Window::on_state_changed(WindowState changed_mask, WindowState new_state) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->state_changed) (*base->state_changed)(gobj(),((WnckWindowState)(changed_mask)),((WnckWindowState)(new_state))); } void Wnck::Window::on_workspace_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->workspace_changed) (*base->workspace_changed)(gobj()); } void Wnck::Window::on_icon_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->icon_changed) (*base->icon_changed)(gobj()); } void Wnck::Window::on_name_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->name_changed) (*base->name_changed)(gobj()); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/Makefile.in0000664000175000017500000006671112414127605020244 0ustar00execexec00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/../src/filelist.am $(srcdir)/filelist.am \ $(top_srcdir)/m4/compile-binding.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(top_srcdir)/m4/depcomp \ $(binding_include_HEADERS) $(binding_private_HEADERS) subdir = wnck/wnckmm ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(binding_includedir)" \ "$(DESTDIR)$(binding_privatedir)" LTLIBRARIES = $(lib_LTLIBRARIES) am__DEPENDENCIES_1 = libwnckmm_@WNCKMM_API_VERSION@_la_DEPENDENCIES = \ $(am__DEPENDENCIES_1) am__objects_1 = action-menu.lo application.lo class-group.lo pager.lo \ screen.lo selector.lo tasklist.lo window.lo workspace.lo am__objects_2 = $(am__objects_1) wrap_init.lo init.lo am__objects_3 = $(am__objects_2) am__objects_4 = am__objects_5 = $(am__objects_4) am__objects_6 = $(am__objects_3) $(am__objects_5) am_libwnckmm_@WNCKMM_API_VERSION@_la_OBJECTS = $(am__objects_6) libwnckmm_@WNCKMM_API_VERSION@_la_OBJECTS = \ $(am_libwnckmm_@WNCKMM_API_VERSION@_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = libwnckmm_@WNCKMM_API_VERSION@_la_LINK = $(LIBTOOL) $(AM_V_lt) \ --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \ $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ $(libwnckmm_@WNCKMM_API_VERSION@_la_LDFLAGS) $(LDFLAGS) -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/m4/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) AM_V_CXX = $(am__v_CXX_@AM_V@) am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) am__v_CXX_0 = @echo " CXX " $@; am__v_CXX_1 = CXXLD = $(CXX) CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) am__v_CXXLD_0 = @echo " CXXLD " $@; am__v_CXXLD_1 = SOURCES = $(libwnckmm_@WNCKMM_API_VERSION@_la_SOURCES) DIST_SOURCES = $(libwnckmm_@WNCKMM_API_VERSION@_la_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac HEADERS = $(binding_include_HEADERS) $(binding_private_HEADERS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOCINSTALL_FLAGS = @DOCINSTALL_FLAGS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DOXYGEN_TAGFILES = @DOXYGEN_TAGFILES@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GMMPROC_DIR = @GMMPROC_DIR@ GMMPROC_EXTRA_M4_DIR = @GMMPROC_EXTRA_M4_DIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBWNCKMM_SO_VERSION = @LIBWNCKMM_SO_VERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MMDOCTOOLDIR = @MMDOCTOOLDIR@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WNCKMM_API_VERSION = @WNCKMM_API_VERSION@ WNCKMM_CFLAGS = @WNCKMM_CFLAGS@ WNCKMM_LIBS = @WNCKMM_LIBS@ WNCKMM_MAJOR_VERSION = @WNCKMM_MAJOR_VERSION@ WNCKMM_MICRO_VERSION = @WNCKMM_MICRO_VERSION@ WNCKMM_MINOR_VERSION = @WNCKMM_MINOR_VERSION@ WNCKMM_MODULES = @WNCKMM_MODULES@ WNCKMM_MODULE_NAME = @WNCKMM_MODULE_NAME@ WNCKMM_VERSION = @WNCKMM_VERSION@ WNCK_CFLAGS = @WNCK_CFLAGS@ WNCK_LIBS = @WNCK_LIBS@ XSLTPROC = @XSLTPROC@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ lib_LTLIBRARIES = libwnckmm-@WNCKMM_API_VERSION@.la wnckmm_files_defs = \ wnck.defs \ wnck_enums.defs \ wnck_methods.defs \ wnck_signals.defs wnckmm_files_hg = \ action-menu.hg \ application.hg \ class-group.hg \ pager.hg \ screen.hg \ selector.hg \ tasklist.hg \ window.hg \ workspace.hg wnckmm_files_ccg = $(wnckmm_files_hg:.hg=.ccg) wnckmm_files_built_cc = $(wnckmm_files_hg:.hg=.cc) wrap_init.cc init.cc wnckmm_files_built_h = $(wnckmm_files_hg:.hg=.h) wnckmm_files_built_ph = $(patsubst %.hg,private/%_p.h,$(wnckmm_files_hg)) wnckmm_files_extra_cc = wnckmm_files_extra_h = wrap_init.h init.h libwnck-wrapper.h wnckmm_files_extra_ph = files_built_cc = $(wnckmm_files_built_cc) files_built_h = $(wnckmm_files_built_h) files_built_ph = $(wnckmm_files_built_ph) files_extra_cc = $(wnckmm_files_extra_cc) files_extra_h = $(wnckmm_files_extra_h) files_extra_ph = $(wnckmm_files_extra_ph) # Try to work out whether the binding's module name includes a "lib" prefix. binding_libprefix = $(if $(filter lib%,$(binding_name)),lib) # Files to be listed in the module's _SOURCES variable. binding_sources = $(files_built_cc) $(files_extra_cc) # Default include directories and preprocessor flags. binding_includes = -I..$(if $(srcdir:.=), -I$(top_srcdir)/$(binding_basedir)) -I$(top_builddir) binding_cppflags = -DG_LOG_DOMAIN=\"$(binding_name)\" # Installation directories for header files. binding_includedir = $(includedir)/$(binding_modulename)/$(binding_name) binding_privatedir = $(binding_includedir)/private # List of installed header files. binding_include_HEADERS = $(files_built_h) $(files_extra_h) binding_private_HEADERS = $(files_built_ph) $(files_extra_ph) # Delete built sources on make maintainer-clean. binding_built_sources = $(files_built_cc) $(files_built_h) $(files_built_ph) MAINTAINERCLEANFILES = $(binding_built_sources) $(addprefix $(srcdir)/,$(binding_built_sources)) local_cppflags = $(binding_includes) $(binding_cppflags) AM_CPPFLAGS = $(local_cppflags) $(GTHREAD_CFLAGS) $(WNCKMM_CFLAGS) AM_CXXFLAGS = $(WNCKMM_WXXFLAGS) libwnckmm_@WNCKMM_API_VERSION@_la_SOURCES = $(binding_sources) libwnckmm_@WNCKMM_API_VERSION@_la_LDFLAGS = -no-undefined -version-info $(LIBWNCKMM_SO_VERSION) libwnckmm_@WNCKMM_API_VERSION@_la_LIBADD = $(WNCKMM_LIBS) all: all-am .SUFFIXES: .SUFFIXES: .cc .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../src/filelist.am $(srcdir)/filelist.am $(top_srcdir)/m4/compile-binding.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign wnck/wnckmm/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign wnck/wnckmm/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(srcdir)/../src/filelist.am $(srcdir)/filelist.am $(top_srcdir)/m4/compile-binding.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } libwnckmm-@WNCKMM_API_VERSION@.la: $(libwnckmm_@WNCKMM_API_VERSION@_la_OBJECTS) $(libwnckmm_@WNCKMM_API_VERSION@_la_DEPENDENCIES) $(EXTRA_libwnckmm_@WNCKMM_API_VERSION@_la_DEPENDENCIES) $(AM_V_CXXLD)$(libwnckmm_@WNCKMM_API_VERSION@_la_LINK) -rpath $(libdir) $(libwnckmm_@WNCKMM_API_VERSION@_la_OBJECTS) $(libwnckmm_@WNCKMM_API_VERSION@_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/action-menu.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/application.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/class-group.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/init.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pager.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/screen.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/selector.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasklist.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/window.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workspace.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrap_init.Plo@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cc.lo: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-binding_includeHEADERS: $(binding_include_HEADERS) @$(NORMAL_INSTALL) @list='$(binding_include_HEADERS)'; test -n "$(binding_includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(binding_includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(binding_includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(binding_includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(binding_includedir)" || exit $$?; \ done uninstall-binding_includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(binding_include_HEADERS)'; test -n "$(binding_includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(binding_includedir)'; $(am__uninstall_files_from_dir) install-binding_privateHEADERS: $(binding_private_HEADERS) @$(NORMAL_INSTALL) @list='$(binding_private_HEADERS)'; test -n "$(binding_privatedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(binding_privatedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(binding_privatedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(binding_privatedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(binding_privatedir)" || exit $$?; \ done uninstall-binding_privateHEADERS: @$(NORMAL_UNINSTALL) @list='$(binding_private_HEADERS)'; test -n "$(binding_privatedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(binding_privatedir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(binding_includedir)" "$(DESTDIR)$(binding_privatedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-binding_includeHEADERS \ install-binding_privateHEADERS install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binding_includeHEADERS \ uninstall-binding_privateHEADERS uninstall-libLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \ ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am \ install-binding_includeHEADERS install-binding_privateHEADERS \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-libLTLIBRARIES \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-binding_includeHEADERS \ uninstall-binding_privateHEADERS uninstall-libLTLIBRARIES # The name of the binding module. Usually identical to the name of the # directory where the generated sources and include files live. binding_name ?= $(notdir $(subdir)) # The parent directory of the src/ and libmm/ directories. # Usually the same as the C library name. binding_basedir ?= $(patsubst %/,%,$(dir $(subdir))) # The library name of the binding, possibly including an API version suffix. # Depending on the module, the "lib" prefix may or may not be included. binding_modulename ?= $(patsubst lib%,$(binding_libprefix)%,$(basename $(lib_LTLIBRARIES))) # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libwnckmm-1.0-0.1.1/wnck/wnckmm/pager.cc0000644000175000017500000000676412414127653017607 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include namespace Wnck { Pager::Pager(const Screen* screen) : Gtk::Widget((GtkWidget*)wnck_pager_new(const_cast(screen->gobj()))) { } } // namespace Wnck namespace { } // anonymous namespace // static GType Glib::Value::value_type() { return wnck_pager_display_mode_get_type(); } namespace Glib { Wnck::Pager* wrap(WnckPager* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Pager_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Pager_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_pager_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Pager_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); } Glib::ObjectBase* Pager_Class::wrap_new(GObject* o) { return manage(new Pager((WnckPager*)(o))); } /* The implementation: */ Pager::Pager(const Glib::ConstructParams& construct_params) : Gtk::Widget(construct_params) { } Pager::Pager(WnckPager* castitem) : Gtk::Widget((GtkWidget*)(castitem)) { } Pager::~Pager() { destroy_(); } Pager::CppClassType Pager::pager_class_; // initialize static member GType Pager::get_type() { return pager_class_.init().get_type(); } GType Pager::get_base_type() { return wnck_pager_get_type(); } bool Pager::set_orientation(Gtk::Orientation orientation) { return wnck_pager_set_orientation(gobj(), ((GtkOrientation)(orientation))); } bool Pager::set_row_count(int count) { return wnck_pager_set_n_rows(gobj(), count); } void Pager::set_display_mode(PagerDisplayMode mode) { wnck_pager_set_display_mode(gobj(), ((WnckPagerDisplayMode)(mode))); } void Pager::set_show_all(bool show_all) { wnck_pager_set_show_all(gobj(), static_cast(show_all)); } void Pager::set_shadow_type(Gtk::ShadowType shadow_type) { wnck_pager_set_shadow_type(gobj(), ((GtkShadowType)(shadow_type))); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/class-group.cc0000644000175000017500000000775012414127653020744 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include namespace Wnck { } // namespace Wnck namespace { } // anonymous namespace namespace Glib { Wnck::ClassGroup* wrap(WnckClassGroup* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& ClassGroup_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &ClassGroup_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_class_group_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void ClassGroup_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); } Glib::ObjectBase* ClassGroup_Class::wrap_new(GObject* object) { return new ClassGroup((WnckClassGroup*)object); } ClassGroup::ClassGroup(const Glib::ConstructParams& construct_params) : Glib::Object(construct_params) { } ClassGroup::ClassGroup(WnckClassGroup* castitem) : Glib::Object((GObject*)(castitem)) {} ClassGroup::~ClassGroup() {} ClassGroup::CppClassType ClassGroup::classgroup_class_; // initialize static member GType ClassGroup::get_type() { return classgroup_class_.init().get_type(); } GType ClassGroup::get_base_type() { return wnck_class_group_get_type(); } ClassGroup::ClassGroup() : // Mark this class as non-derived to allow C++ vfuncs to be skipped. Glib::ObjectBase(0), Glib::Object(Glib::ConstructParams(classgroup_class_.init())) { } ClassGroup* ClassGroup::get(const std::string& res_class) { return Glib::wrap(wnck_class_group_get(res_class.c_str())); } std::string ClassGroup::get_res_class() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_class_group_get_res_class(const_cast(gobj()))); } std::string ClassGroup::get_name() const { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_class_group_get_name(const_cast(gobj()))); } Glib::RefPtr ClassGroup::get_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_class_group_get_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } Glib::RefPtr ClassGroup::get_mini_icon() const { Glib::RefPtr retvalue = Glib::wrap(wnck_class_group_get_mini_icon(const_cast(gobj()))); if(retvalue) retvalue->reference(); //The function does not do a ref for us. return retvalue; } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/selector.h0000644000175000017500000000601712414127654020163 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_SELECTOR_H #define _WNCKMM_SELECTOR_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckSelector WnckSelector; typedef struct _WnckSelectorClass WnckSelectorClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Selector_Class; } // namespace Wnck namespace Wnck { /** This represents a workspace. */ class Selector : public Gtk::MenuBar { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Selector CppObjectType; typedef Selector_Class CppClassType; typedef WnckSelector BaseObjectType; typedef WnckSelectorClass BaseClassType; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ virtual ~Selector(); #ifndef DOXYGEN_SHOULD_SKIP_THIS private: friend class Selector_Class; static CppClassType selector_class_; // noncopyable Selector(const Selector&); Selector& operator=(const Selector&); protected: explicit Selector(const Glib::ConstructParams& construct_params); explicit Selector(WnckSelector* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_type() G_GNUC_CONST; static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GtkObject. WnckSelector* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GtkObject. const WnckSelector* gobj() const { return reinterpret_cast(gobject_); } public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: private: public: /** Creates a selector menu */ explicit Selector(); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Selector */ Wnck::Selector* wrap(WnckSelector* object, bool take_copy = false); } //namespace Glib #endif /* _WNCKMM_SELECTOR_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/wrap_init.cc0000664000175000017500000000572512414127246020501 0ustar00execexec00000000000000#include // This file is not generated, it must be updated with new classes // Disable the 'const' function attribute of the get_type() functions. // GCC would optimize them out because we don't use the return value. #undef G_GNUC_CONST #define G_GNUC_CONST /* empty */ #include #include #include // #include the widget headers so that we can call the get_type() static methods: #include "action-menu.h" #include "application.h" #include "class-group.h" #include "pager.h" #include "screen.h" #include "selector.h" #include "tasklist.h" #include "window.h" #include "workspace.h" extern "C" { //Declarations of the *_get_type() functions: GType wnck_action_menu_get_type(void); GType wnck_application_get_type(void); GType wnck_class_group_get_type(void); GType wnck_pager_get_type(void); GType wnck_screen_get_type(void); GType wnck_selector_get_type(void); GType wnck_tasklist_get_type(void); GType wnck_window_get_type(void); GType wnck_workspace_get_type(void); //Declarations of the *_error_quark() functions: } // extern "C" namespace Wnck { //Declarations of the *_Class::wrap_new() methods, instead of including all the private headers: class ActionMenu_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Application_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class ClassGroup_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Pager_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Screen_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Selector_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Tasklist_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Window_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; class Workspace_Class { public: static Glib::ObjectBase* wrap_new(GObject*); }; void wrap_init() { // Register Error domains in the main namespace: // Map gtypes to gtkmm wrapper-creation functions: Glib::wrap_register(wnck_action_menu_get_type(), &ActionMenu_Class::wrap_new); Glib::wrap_register(wnck_application_get_type(), &Application_Class::wrap_new); Glib::wrap_register(wnck_class_group_get_type(), &ClassGroup_Class::wrap_new); Glib::wrap_register(wnck_pager_get_type(), &Pager_Class::wrap_new); Glib::wrap_register(wnck_screen_get_type(), &Screen_Class::wrap_new); Glib::wrap_register(wnck_selector_get_type(), &Selector_Class::wrap_new); Glib::wrap_register(wnck_tasklist_get_type(), &Tasklist_Class::wrap_new); Glib::wrap_register(wnck_window_get_type(), &Window_Class::wrap_new); Glib::wrap_register(wnck_workspace_get_type(), &Workspace_Class::wrap_new); // Register the gtkmm gtypes: ActionMenu::get_type(); Application::get_type(); ClassGroup::get_type(); Pager::get_type(); Screen::get_type(); Selector::get_type(); Tasklist::get_type(); Window::get_type(); Workspace::get_type(); } // wrap_init() } // Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/filelist.am0000644000175000017500000000052312257625652020326 0ustar00execexec00000000000000## This file is part of wnckmm. wnckmm_files_built_cc = $(wnckmm_files_hg:.hg=.cc) wrap_init.cc init.cc wnckmm_files_built_h = $(wnckmm_files_hg:.hg=.h) wnckmm_files_built_ph = $(patsubst %.hg,private/%_p.h,$(wnckmm_files_hg)) wnckmm_files_extra_cc = wnckmm_files_extra_h = wrap_init.h init.h libwnck-wrapper.h wnckmm_files_extra_ph = libwnckmm-1.0-0.1.1/wnck/wnckmm/private/0000775000175000017500000000000012414127716017641 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/wnck/wnckmm/private/pager_p.h0000644000175000017500000000203512414127653021425 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_PAGER_P_H #define _WNCKMM_PAGER_P_H #include #include namespace Wnck { class Pager_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Pager CppObjectType; typedef WnckPager BaseObjectType; typedef WnckPagerClass BaseClassType; typedef Gtk::Widget_Class CppClassParent; typedef GtkWidgetClass BaseClassParent; friend class Pager; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_PAGER_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/screen_p.h0000644000175000017500000000437012414127653021612 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_SCREEN_P_H #define _WNCKMM_SCREEN_P_H #include #include #include #include #include #include namespace Wnck { class Screen_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Screen CppObjectType; typedef WnckScreen BaseObjectType; typedef WnckScreenClass BaseClassType; typedef Glib::Object_Class CppClassParent; typedef GObjectClass BaseClassParent; friend class Screen; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. static void active_window_changed_callback(WnckScreen* self, WnckWindow* p0); static void active_workspace_changed_callback(WnckScreen* self, WnckWorkspace* p0); static void application_closed_callback(WnckScreen* self, WnckApplication* p0); static void application_opened_callback(WnckScreen* self, WnckApplication* p0); static void background_changed_callback(WnckScreen* self); static void class_group_closed_callback(WnckScreen* self, WnckClassGroup* p0); static void class_group_opened_callback(WnckScreen* self, WnckClassGroup* p0); static void showing_desktop_changed_callback(WnckScreen* self); static void viewports_changed_callback(WnckScreen* self); static void window_opened_callback(WnckScreen* self, WnckWindow* p0); static void window_closed_callback(WnckScreen* self, WnckWindow* p0); static void window_manager_changed_callback(WnckScreen* self); static void window_stacking_changed_callback(WnckScreen* self); static void workspace_created_callback(WnckScreen* self, WnckWorkspace* p0); static void workspace_destroyed_callback(WnckScreen* self, WnckWorkspace* p0); //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_SCREEN_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/tasklist_p.h0000644000175000017500000000207612414127654022173 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_TASKLIST_P_H #define _WNCKMM_TASKLIST_P_H #include #include namespace Wnck { class Tasklist_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Tasklist CppObjectType; typedef WnckTasklist BaseObjectType; typedef WnckTasklistClass BaseClassType; typedef Gtk::Container_Class CppClassParent; typedef GtkContainerClass BaseClassParent; friend class Tasklist; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_TASKLIST_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/selector_p.h0000644000175000017500000000207012414127654022147 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_SELECTOR_P_H #define _WNCKMM_SELECTOR_P_H #include #include namespace Wnck { class Selector_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Selector CppObjectType; typedef WnckSelector BaseObjectType; typedef WnckSelectorClass BaseClassType; typedef Gtk::MenuBar_Class CppClassParent; typedef GtkMenuBarClass BaseClassParent; friend class Selector; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_SELECTOR_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/application_p.h0000644000175000017500000000230512414127653022632 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_APPLICATION_P_H #define _WNCKMM_APPLICATION_P_H #include #include namespace Wnck { class Application_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Application CppObjectType; typedef WnckApplication BaseObjectType; typedef WnckApplicationClass BaseClassType; typedef Glib::Object_Class CppClassParent; typedef GObjectClass BaseClassParent; friend class Application; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. static void name_changed_callback(WnckApplication* self); static void icon_changed_callback(WnckApplication* self); //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_APPLICATION_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/action-menu_p.h0000644000175000017500000000210212414127653022541 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_ACTION_MENU_P_H #define _WNCKMM_ACTION_MENU_P_H #include #include namespace Wnck { class ActionMenu_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef ActionMenu CppObjectType; typedef WnckActionMenu BaseObjectType; typedef WnckActionMenuClass BaseClassType; typedef Gtk::Menu_Class CppClassParent; typedef GtkMenuClass BaseClassParent; friend class ActionMenu; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_ACTION_MENU_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/class-group_p.h0000644000175000017500000000211012414127653022560 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_CLASS_GROUP_P_H #define _WNCKMM_CLASS_GROUP_P_H #include #include namespace Wnck { class ClassGroup_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef ClassGroup CppObjectType; typedef WnckClassGroup BaseObjectType; typedef WnckClassGroupClass BaseClassType; typedef Glib::Object_Class CppClassParent; typedef GObjectClass BaseClassParent; friend class ClassGroup; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_CLASS_GROUP_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/window_p.h0000644000175000017500000000276412414127654021650 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_WINDOW_P_H #define _WNCKMM_WINDOW_P_H #include #include #include namespace Wnck { class Window_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Window CppObjectType; typedef WnckWindow BaseObjectType; typedef WnckWindowClass BaseClassType; typedef Glib::Object_Class CppClassParent; typedef GObjectClass BaseClassParent; friend class Window; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. static void actions_changed_callback(WnckWindow* self, WnckWindowActions p0, WnckWindowActions p1); static void geometry_changed_callback(WnckWindow* self); static void state_changed_callback(WnckWindow* self, WnckWindowState p0, WnckWindowState p1); static void workspace_changed_callback(WnckWindow* self); static void icon_changed_callback(WnckWindow* self); static void name_changed_callback(WnckWindow* self); //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_WINDOW_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/private/workspace_p.h0000644000175000017500000000216712414127654022334 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_WORKSPACE_P_H #define _WNCKMM_WORKSPACE_P_H #include #include namespace Wnck { class Workspace_Class : public Glib::Class { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Workspace CppObjectType; typedef WnckWorkspace BaseObjectType; typedef WnckWorkspaceClass BaseClassType; typedef Glib::Object_Class CppClassParent; typedef GObjectClass BaseClassParent; friend class Workspace; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ const Glib::Class& init(); static void class_init_function(void* g_class, void* class_data); static Glib::ObjectBase* wrap_new(GObject*); protected: //Callbacks (default signal handlers): //These will call the *_impl member methods, which will then call the existing default signal callbacks, if any. //You could prevent the original default signal handlers being called by overriding the *_impl method. static void name_changed_callback(WnckWorkspace* self); //Callbacks (virtual functions): }; } // namespace Wnck #endif /* _WNCKMM_WORKSPACE_P_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/screen.cc0000644000175000017500000013531412414127653017762 0ustar00execexec00000000000000// Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #include #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #include #include namespace Wnck { } // namespace Wnck namespace { static void Screen_signal_active_window_changed_callback(WnckScreen* self, WnckWindow* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Window* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_active_window_changed_info = { "active-window-changed", (GCallback) &Screen_signal_active_window_changed_callback, (GCallback) &Screen_signal_active_window_changed_callback }; static void Screen_signal_active_workspace_changed_callback(WnckScreen* self, WnckWorkspace* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Workspace* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_active_workspace_changed_info = { "active-workspace-changed", (GCallback) &Screen_signal_active_workspace_changed_callback, (GCallback) &Screen_signal_active_workspace_changed_callback }; static void Screen_signal_application_closed_callback(WnckScreen* self, WnckApplication* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Application* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_application_closed_info = { "application-closed", (GCallback) &Screen_signal_application_closed_callback, (GCallback) &Screen_signal_application_closed_callback }; static void Screen_signal_application_opened_callback(WnckScreen* self, WnckApplication* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Application* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_application_opened_info = { "application-opened", (GCallback) &Screen_signal_application_opened_callback, (GCallback) &Screen_signal_application_opened_callback }; static const Glib::SignalProxyInfo Screen_signal_backgroupnd_changed_info = { "background-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static void Screen_signal_class_group_closed_callback(WnckScreen* self, WnckClassGroup* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,ClassGroup* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_class_group_closed_info = { "class-group-closed", (GCallback) &Screen_signal_class_group_closed_callback, (GCallback) &Screen_signal_class_group_closed_callback }; static void Screen_signal_class_group_opened_callback(WnckScreen* self, WnckClassGroup* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,ClassGroup* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_class_group_opened_info = { "class-group-opened", (GCallback) &Screen_signal_class_group_opened_callback, (GCallback) &Screen_signal_class_group_opened_callback }; static const Glib::SignalProxyInfo Screen_signal_showing_desktop_changed_info = { "showing-desktop-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static const Glib::SignalProxyInfo Screen_signal_viewports_changed_info = { "viewports-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static void Screen_signal_window_opened_callback(WnckScreen* self, WnckWindow* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Window* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_window_opened_info = { "window-opened", (GCallback) &Screen_signal_window_opened_callback, (GCallback) &Screen_signal_window_opened_callback }; static void Screen_signal_window_closed_callback(WnckScreen* self, WnckWindow* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Window* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_window_closed_info = { "window-closed", (GCallback) &Screen_signal_window_closed_callback, (GCallback) &Screen_signal_window_closed_callback }; static const Glib::SignalProxyInfo Screen_signal_window_manager_changed_info = { "window-manager-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static const Glib::SignalProxyInfo Screen_signal_window_stacking_changed_info = { "window-stacking-changed", (GCallback) &Glib::SignalProxyNormal::slot0_void_callback, (GCallback) &Glib::SignalProxyNormal::slot0_void_callback }; static void Screen_signal_workspace_created_callback(WnckScreen* self, WnckWorkspace* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Workspace* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_workspace_created_info = { "workspace-created", (GCallback) &Screen_signal_workspace_created_callback, (GCallback) &Screen_signal_workspace_created_callback }; static void Screen_signal_workspace_destroyed_callback(WnckScreen* self, WnckWorkspace* p0,void* data) { using namespace Wnck; typedef sigc::slot< void,Workspace* > SlotType; // Do not try to call a signal on a disassociated wrapper. if(Glib::ObjectBase::_get_current_wrapper((GObject*) self)) { #ifdef GLIBMM_EXCEPTIONS_ENABLED try { #endif //GLIBMM_EXCEPTIONS_ENABLED if(sigc::slot_base *const slot = Glib::SignalProxyNormal::data_to_slot(data)) (*static_cast(slot))(Glib::wrap(p0) ); #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } static const Glib::SignalProxyInfo Screen_signal_workspace_destroyed_info = { "workspace-destroyed", (GCallback) &Screen_signal_workspace_destroyed_callback, (GCallback) &Screen_signal_workspace_destroyed_callback }; } // anonymous namespace namespace Glib { Wnck::Screen* wrap(WnckScreen* object, bool take_copy) { return dynamic_cast (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ namespace Wnck { /* The *_Class implementation: */ const Glib::Class& Screen_Class::init() { if(!gtype_) // create the GType if necessary { // Glib::Class has to know the class init function to clone custom types. class_init_func_ = &Screen_Class::class_init_function; // This is actually just optimized away, apparently with no harm. // Make sure that the parent type has been created. //CppClassParent::CppObjectType::get_type(); // Create the wrapper type, with the same class/instance size as the base type. register_derived_type(wnck_screen_get_type()); // Add derived versions of interfaces, if the C type implements any interfaces: } return *this; } void Screen_Class::class_init_function(void* g_class, void* class_data) { BaseClassType *const klass = static_cast(g_class); CppClassParent::class_init_function(klass, class_data); klass->active_window_changed = &active_window_changed_callback; klass->active_workspace_changed = &active_workspace_changed_callback; klass->application_closed = &application_closed_callback; klass->application_opened = &application_opened_callback; klass->background_changed = &background_changed_callback; klass->class_group_closed = &class_group_closed_callback; klass->class_group_opened = &class_group_opened_callback; klass->showing_desktop_changed = &showing_desktop_changed_callback; klass->viewports_changed = &viewports_changed_callback; klass->window_opened = &window_opened_callback; klass->window_closed = &window_closed_callback; klass->window_manager_changed = &window_manager_changed_callback; klass->window_stacking_changed = &window_stacking_changed_callback; klass->workspace_created = &workspace_created_callback; klass->workspace_destroyed = &workspace_destroyed_callback; } void Screen_Class::active_window_changed_callback(WnckScreen* self, WnckWindow* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_active_window_changed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->active_window_changed) (*base->active_window_changed)(self, p0); } void Screen_Class::active_workspace_changed_callback(WnckScreen* self, WnckWorkspace* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_active_workspace_changed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->active_workspace_changed) (*base->active_workspace_changed)(self, p0); } void Screen_Class::application_closed_callback(WnckScreen* self, WnckApplication* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_application_closed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->application_closed) (*base->application_closed)(self, p0); } void Screen_Class::application_opened_callback(WnckScreen* self, WnckApplication* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_application_opened(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->application_opened) (*base->application_opened)(self, p0); } void Screen_Class::background_changed_callback(WnckScreen* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_backgroupnd_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->background_changed) (*base->background_changed)(self); } void Screen_Class::class_group_closed_callback(WnckScreen* self, WnckClassGroup* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_class_group_closed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->class_group_closed) (*base->class_group_closed)(self, p0); } void Screen_Class::class_group_opened_callback(WnckScreen* self, WnckClassGroup* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_class_group_opened(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->class_group_opened) (*base->class_group_opened)(self, p0); } void Screen_Class::showing_desktop_changed_callback(WnckScreen* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_showing_desktop_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->showing_desktop_changed) (*base->showing_desktop_changed)(self); } void Screen_Class::viewports_changed_callback(WnckScreen* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_viewports_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->viewports_changed) (*base->viewports_changed)(self); } void Screen_Class::window_opened_callback(WnckScreen* self, WnckWindow* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_window_opened(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->window_opened) (*base->window_opened)(self, p0); } void Screen_Class::window_closed_callback(WnckScreen* self, WnckWindow* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_window_closed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->window_closed) (*base->window_closed)(self, p0); } void Screen_Class::window_manager_changed_callback(WnckScreen* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_window_manager_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->window_manager_changed) (*base->window_manager_changed)(self); } void Screen_Class::window_stacking_changed_callback(WnckScreen* self) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_window_stacking_changed(); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->window_stacking_changed) (*base->window_stacking_changed)(self); } void Screen_Class::workspace_created_callback(WnckScreen* self, WnckWorkspace* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_workspace_created(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->workspace_created) (*base->workspace_created)(self, p0); } void Screen_Class::workspace_destroyed_callback(WnckScreen* self, WnckWorkspace* p0) { Glib::ObjectBase *const obj_base = static_cast( Glib::ObjectBase::_get_current_wrapper((GObject*)self)); // Non-gtkmmproc-generated custom classes implicitly call the default // Glib::ObjectBase constructor, which sets is_derived_. But gtkmmproc- // generated classes can use this optimisation, which avoids the unnecessary // parameter conversions if there is no possibility of the virtual function // being overridden: if(obj_base && obj_base->is_derived_()) { CppObjectType *const obj = dynamic_cast(obj_base); if(obj) // This can be NULL during destruction. { #ifdef GLIBMM_EXCEPTIONS_ENABLED try // Trap C++ exceptions which would normally be lost because this is a C callback. { #endif //GLIBMM_EXCEPTIONS_ENABLED // Call the virtual member method, which derived classes might override. obj->on_workspace_destroyed(Glib::wrap(p0) ); return; #ifdef GLIBMM_EXCEPTIONS_ENABLED } catch(...) { Glib::exception_handlers_invoke(); } #endif //GLIBMM_EXCEPTIONS_ENABLED } } BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(self)) // Get the parent class of the object class (The original underlying C class). ); // Call the original underlying C function: if(base && base->workspace_destroyed) (*base->workspace_destroyed)(self, p0); } Glib::ObjectBase* Screen_Class::wrap_new(GObject* object) { return new Screen((WnckScreen*)object); } Screen::Screen(const Glib::ConstructParams& construct_params) : Glib::Object(construct_params) { } Screen::Screen(WnckScreen* castitem) : Glib::Object((GObject*)(castitem)) {} Screen::~Screen() {} Screen::CppClassType Screen::screen_class_; // initialize static member GType Screen::get_type() { return screen_class_.init().get_type(); } GType Screen::get_base_type() { return wnck_screen_get_type(); } Screen* Screen::get_default() { return Glib::wrap(wnck_screen_get_default()); } Screen* Screen::get(int index) { return Glib::wrap(wnck_screen_get(index)); } Screen* Screen::get_for_root(gulong root_id) { return Glib::wrap(wnck_screen_get_for_root(root_id)); } int Screen::get_number() const { return wnck_screen_get_number(const_cast(gobj())); } int Screen::get_width() const { return wnck_screen_get_width(const_cast(gobj())); } int Screen::get_height() const { return wnck_screen_get_height(const_cast(gobj())); } void Screen::force_update() { wnck_screen_force_update(gobj()); } std::string Screen::get_window_manager_name() { return Glib::convert_const_gchar_ptr_to_stdstring(wnck_screen_get_window_manager_name(gobj())); } bool Screen::net_wm_supports(const std::string& atom) { return wnck_screen_net_wm_supports(gobj(), atom.c_str()); } Window* Screen::get_active_window() const { return Glib::wrap(wnck_screen_get_active_window(const_cast(gobj()))); } Window* Screen::get_previously_active_window() const { return Glib::wrap(wnck_screen_get_previously_active_window(const_cast(gobj()))); } Glib::ListHandle Screen::get_windows() const { return Glib::ListHandle(wnck_screen_get_windows(const_cast(gobj())), Glib::OWNERSHIP_NONE); } Glib::ListHandle Screen::get_windows_stacked() const { return Glib::ListHandle(wnck_screen_get_windows_stacked(const_cast(gobj())), Glib::OWNERSHIP_NONE); } Workspace* Screen::get_active_workspace() const { return Glib::wrap(wnck_screen_get_active_workspace(const_cast(gobj()))); } Workspace* Screen::get_workspace(int workspace) const { return Glib::wrap(wnck_screen_get_workspace(const_cast(gobj()), workspace)); } int Screen::get_workspace_count() const { return wnck_screen_get_workspace_count(const_cast(gobj())); } void Screen::set_workspace_count(int count) const { wnck_screen_change_workspace_count(const_cast(gobj()), count); } void Screen::move_viewport(int x, int y) const { wnck_screen_move_viewport(const_cast(gobj()), x, y); } gulong Screen::get_background_pixmap_xid() const { return wnck_screen_get_background_pixmap(const_cast(gobj())); } void Screen::set_showing_desktop(bool show) const { wnck_screen_toggle_showing_desktop(const_cast(gobj()), static_cast(show)); } Glib::SignalProxy1< void,Window* > Screen::signal_active_window_changed() { return Glib::SignalProxy1< void,Window* >(this, &Screen_signal_active_window_changed_info); } Glib::SignalProxy1< void,Workspace* > Screen::signal_active_workspace_changed() { return Glib::SignalProxy1< void,Workspace* >(this, &Screen_signal_active_workspace_changed_info); } Glib::SignalProxy1< void,Application* > Screen::signal_application_closed() { return Glib::SignalProxy1< void,Application* >(this, &Screen_signal_application_closed_info); } Glib::SignalProxy1< void,Application* > Screen::signal_application_opened() { return Glib::SignalProxy1< void,Application* >(this, &Screen_signal_application_opened_info); } Glib::SignalProxy0< void > Screen::signal_backgroupnd_changed() { return Glib::SignalProxy0< void >(this, &Screen_signal_backgroupnd_changed_info); } Glib::SignalProxy1< void,ClassGroup* > Screen::signal_class_group_closed() { return Glib::SignalProxy1< void,ClassGroup* >(this, &Screen_signal_class_group_closed_info); } Glib::SignalProxy1< void,ClassGroup* > Screen::signal_class_group_opened() { return Glib::SignalProxy1< void,ClassGroup* >(this, &Screen_signal_class_group_opened_info); } Glib::SignalProxy0< void > Screen::signal_showing_desktop_changed() { return Glib::SignalProxy0< void >(this, &Screen_signal_showing_desktop_changed_info); } Glib::SignalProxy0< void > Screen::signal_viewports_changed() { return Glib::SignalProxy0< void >(this, &Screen_signal_viewports_changed_info); } Glib::SignalProxy1< void,Window* > Screen::signal_window_opened() { return Glib::SignalProxy1< void,Window* >(this, &Screen_signal_window_opened_info); } Glib::SignalProxy1< void,Window* > Screen::signal_window_closed() { return Glib::SignalProxy1< void,Window* >(this, &Screen_signal_window_closed_info); } Glib::SignalProxy0< void > Screen::signal_window_manager_changed() { return Glib::SignalProxy0< void >(this, &Screen_signal_window_manager_changed_info); } Glib::SignalProxy0< void > Screen::signal_window_stacking_changed() { return Glib::SignalProxy0< void >(this, &Screen_signal_window_stacking_changed_info); } Glib::SignalProxy1< void,Workspace* > Screen::signal_workspace_created() { return Glib::SignalProxy1< void,Workspace* >(this, &Screen_signal_workspace_created_info); } Glib::SignalProxy1< void,Workspace* > Screen::signal_workspace_destroyed() { return Glib::SignalProxy1< void,Workspace* >(this, &Screen_signal_workspace_destroyed_info); } void Wnck::Screen::on_active_window_changed(Window* previously_active_window) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->active_window_changed) (*base->active_window_changed)(gobj(),previously_active_window->gobj()); } void Wnck::Screen::on_active_workspace_changed(Workspace* previously_active_workspace) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->active_workspace_changed) (*base->active_workspace_changed)(gobj(),previously_active_workspace->gobj()); } void Wnck::Screen::on_application_closed(Application* app) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->application_closed) (*base->application_closed)(gobj(),app->gobj()); } void Wnck::Screen::on_application_opened(Application* app) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->application_opened) (*base->application_opened)(gobj(),app->gobj()); } void Wnck::Screen::on_backgroupnd_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->background_changed) (*base->background_changed)(gobj()); } void Wnck::Screen::on_class_group_closed(ClassGroup* app) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->class_group_closed) (*base->class_group_closed)(gobj(),app->gobj()); } void Wnck::Screen::on_class_group_opened(ClassGroup* app) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->class_group_opened) (*base->class_group_opened)(gobj(),app->gobj()); } void Wnck::Screen::on_showing_desktop_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->showing_desktop_changed) (*base->showing_desktop_changed)(gobj()); } void Wnck::Screen::on_viewports_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->viewports_changed) (*base->viewports_changed)(gobj()); } void Wnck::Screen::on_window_opened(Window* window) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->window_opened) (*base->window_opened)(gobj(),window->gobj()); } void Wnck::Screen::on_window_closed(Window* window) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->window_closed) (*base->window_closed)(gobj(),window->gobj()); } void Wnck::Screen::on_window_manager_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->window_manager_changed) (*base->window_manager_changed)(gobj()); } void Wnck::Screen::on_window_stacking_changed() { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->window_stacking_changed) (*base->window_stacking_changed)(gobj()); } void Wnck::Screen::on_workspace_created(Workspace* workspace) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->workspace_created) (*base->workspace_created)(gobj(),workspace->gobj()); } void Wnck::Screen::on_workspace_destroyed(Workspace* workspace) { BaseClassType *const base = static_cast( g_type_class_peek_parent(G_OBJECT_GET_CLASS(gobject_)) // Get the parent class of the object class (The original underlying C class). ); if(base && base->workspace_destroyed) (*base->workspace_destroyed)(gobj(),workspace->gobj()); } } // namespace Wnck libwnckmm-1.0-0.1.1/wnck/wnckmm/pager.h0000644000175000017500000000725512414127653017445 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_PAGER_H #define _WNCKMM_PAGER_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckPager WnckPager; typedef struct _WnckPagerClass WnckPagerClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Pager_Class; } // namespace Wnck namespace Wnck { class Screen; /** @addtogroup wnckmmEnums wnckmm Enums and Flags */ /** * * @ingroup wnckmmEnums */ enum PagerDisplayMode { PAGER_DISPLAY_NAME, PAGER_DISPLAY_CONTENT }; } // namespace Wnck #ifndef DOXYGEN_SHOULD_SKIP_THIS namespace Glib { template <> class Value : public Glib::Value_Enum { public: static GType value_type() G_GNUC_CONST; }; } // namespace Glib #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { /** This represents a pager. */ class Pager : public Gtk::Widget { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Pager CppObjectType; typedef Pager_Class CppClassType; typedef WnckPager BaseObjectType; typedef WnckPagerClass BaseClassType; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ virtual ~Pager(); #ifndef DOXYGEN_SHOULD_SKIP_THIS private: friend class Pager_Class; static CppClassType pager_class_; // noncopyable Pager(const Pager&); Pager& operator=(const Pager&); protected: explicit Pager(const Glib::ConstructParams& construct_params); explicit Pager(WnckPager* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_type() G_GNUC_CONST; static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GtkObject. WnckPager* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GtkObject. const WnckPager* gobj() const { return reinterpret_cast(gobject_); } public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: private: public: /** Creates an action menu for a screen */ explicit Pager(const Screen* screen); bool set_orientation(Gtk::Orientation orientation); bool set_row_count(int count); void set_display_mode(PagerDisplayMode mode); void set_show_all(bool show_all); void set_shadow_type(Gtk::ShadowType shadow_type); }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Pager */ Wnck::Pager* wrap(WnckPager* object, bool take_copy = false); } //namespace Glib #endif /* _WNCKMM_PAGER_H */ libwnckmm-1.0-0.1.1/wnck/wnckmm/tasklist.h0000644000175000017500000000576112414127654020206 0ustar00execexec00000000000000// -*- c++ -*- // Generated by gmmproc 2.39.4 -- DO NOT MODIFY! #ifndef _WNCKMM_TASKLIST_H #define _WNCKMM_TASKLIST_H #include #include /** This file is part of wnckmm Copyright (c) 2013 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #include #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef struct _WnckTasklist WnckTasklist; typedef struct _WnckTasklistClass WnckTasklistClass; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ namespace Wnck { class Tasklist_Class; } // namespace Wnck namespace Wnck { /** This represents a tasklist. */ class Tasklist : public Gtk::Container { public: #ifndef DOXYGEN_SHOULD_SKIP_THIS typedef Tasklist CppObjectType; typedef Tasklist_Class CppClassType; typedef WnckTasklist BaseObjectType; typedef WnckTasklistClass BaseClassType; #endif /* DOXYGEN_SHOULD_SKIP_THIS */ virtual ~Tasklist(); #ifndef DOXYGEN_SHOULD_SKIP_THIS private: friend class Tasklist_Class; static CppClassType tasklist_class_; // noncopyable Tasklist(const Tasklist&); Tasklist& operator=(const Tasklist&); protected: explicit Tasklist(const Glib::ConstructParams& construct_params); explicit Tasklist(WnckTasklist* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: #ifndef DOXYGEN_SHOULD_SKIP_THIS static GType get_type() G_GNUC_CONST; static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GtkObject. WnckTasklist* gobj() { return reinterpret_cast(gobject_); } ///Provides access to the underlying C GtkObject. const WnckTasklist* gobj() const { return reinterpret_cast(gobject_); } public: //C++ methods used to invoke GTK+ virtual functions: protected: //GTK+ Virtual Functions (override these to change behaviour): //Default Signal Handlers:: private: protected: public: // FIXME: TODO: }; } //namespace Wnck namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates Wnck::Tasklist */ Wnck::Tasklist* wrap(WnckTasklist* object, bool take_copy = false); } //namespace Glib #endif /* _WNCKMM_TASKLIST_H */ libwnckmm-1.0-0.1.1/tools/0000775000175000017500000000000012414127716015071 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/tools/extra_defs_gen/0000775000175000017500000000000012414127716020046 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/tools/extra_defs_gen/generate_defs_wnck.cc0000644000175000017500000000262212414127061024163 0ustar00execexec00000000000000/** This file is part of wnckmm Copyright (c) 2013-2014 Povilas Kanapickas This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library. If not, see . */ #ifdef HAVE_CONFIG_H # include #endif #define WNCK_I_KNOW_THIS_IS_UNSTABLE #include #include int main(int argc, char** argv) { std::cout << get_defs(WNCK_TYPE_WINDOW) << get_defs(WNCK_TYPE_APPLICATION) << get_defs(WNCK_TYPE_CLASS_GROUP) << get_defs(WNCK_TYPE_WORKSPACE) << get_defs(WNCK_TYPE_SCREEN) << get_defs(WNCK_TYPE_PAGER) << get_defs(WNCK_TYPE_TASKLIST) << get_defs(WNCK_TYPE_SELECTOR) << get_defs(WNCK_TYPE_ACTION_MENU); return 0; } libwnckmm-1.0-0.1.1/tools/m4/0000775000175000017500000000000012414127716015411 5ustar00execexec00000000000000libwnckmm-1.0-0.1.1/tools/m4/convert.m40000644000175000017500000000143412257641561017337 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . include(convert_wnckmm.m4) libwnckmm-1.0-0.1.1/tools/m4/convert_wnckmm.m40000644000175000017500000000340712257637710020716 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . include(convert_base.m4) include(convert_glib.m4) include(convert_gtk.m4) include(class_wnckobject.m4) include(class_gtkobject.m4) _EQUAL(gulong,unsigned long) _CONV_ENUM(Wnck,MotionDirection) _CONV_ENUM(Wnck,PagerDisplayMode) _CONV_ENUM(Wnck,WindowType) _CONV_ENUM(Wnck,WindowState) _CONV_ENUM(Wnck,WindowActions) _CONV_ENUM(Wnck,WindowGravity) _CONV_ENUM(Wnck,WindowMoveResizeMask) # wnck -> wnckmm _CONVERSION(`WnckApplication*',`Application*',`Glib::wrap($3)') _CONVERSION(`WnckClassGroup*',`ClassGroup*',`Glib::wrap($3)') _CONVERSION(`WnckScreen*',`Screen*',`Glib::wrap($3)') _CONVERSION(`WnckWindow*',`Window*',`Glib::wrap($3)') _CONVERSION(`WnckWorkspace*',`Workspace*',`Glib::wrap($3)') # wnckmm -> wnck _CONVERSION(`Application*',`WnckApplication*',`$3->gobj()') _CONVERSION(`ClassGroup*',`WnckClassGroup*',`$3->gobj()') _CONVERSION(`Window*',`WnckWindow*',`$3->gobj()') _CONVERSION(`Workspace*',`WnckWorkspace*',`$3->gobj()') _CONVERSION(`const Workspace*',`WnckWorkspace*',`const_cast($3->gobj())') libwnckmm-1.0-0.1.1/tools/m4/class_wnckobject.m40000664000175000017500000001422712414127230021166 0ustar00execexec00000000000000## This file is part of wnckmm ## ## Copyright (c) 1998-2002, 2006-2008, The gtkmm Development Team ## Copyright (c) 2002-2004, 2007, The glibmm Development Team ## Copyright (c) 2002-2003, Free Software Foundation ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . dnl $Id$ dnl Some types in libwnck have a convenient property that they are always owned dnl by the library. This file implements a template for such classes. define(`_CLASS_WNCKOBJECT',`dnl _PUSH() dnl dnl Define the args for later macros define(`__CPPNAME__',`$1') define(`__CNAME__',`$2') define(`__CCAST__',`$3') define(`__BASE__',_LOWER(__CPPNAME__)) define(`__CPPPARENT__',`$4') define(`__CPARENT__',`$5') define(`__PCAST__',`($5*)') define(`__REAL_CNAME__',__CNAME__) define(`__REAL_CPARENT__',__CPARENT__) _POP() _SECTION(SECTION_CLASS2) ') dnl end of _CLASS_WNCKOBJECT dnl Widget and Object, and some others, have custom-written destructor implementations: define(`_CUSTOM_DTOR',`dnl _PUSH() dnl Define this macro to be tested for later. define(`__BOOL_CUSTOM_DTOR__',`$1') _POP() ') dnl For classes that need custom code in their cast and construct_params dnl constructor. define(`_CUSTOM_CTOR_CAST',`dnl _PUSH() dnl Define this macro to be tested for later. define(`__BOOL_CUSTOM_CTOR_CAST__',`$1') _POP() ') dnl Some of the Gdk types are actually direct typedefs of their base type. dnl This means that 2 wrap functions would have the same argument. define(`_NO_WRAP_FUNCTION',`dnl _PUSH() dnl Define this macro to be tested for later. define(`__BOOL_NO_WRAP_FUNCTION__',`$1') _POP() dnl ') dnl Some gobjects actually derive from GInitiallyUnowned, which does some odd reference-counting that is useful to C coders. dnl We don't want to expose that base class in our API, dnl but we do want to reverse what it does: define(`_DERIVES_INITIALLY_UNOWNED',`dnl _PUSH() dnl Define this macro to be tested for later. define(`__BOOL_DERIVES_INITIALLY_UNOWNED__',`$1') _POP() ') dnl dnl _CREATE_METHOD(args_type_and_name_hpp, args_type_and_name_cpp,args_name_only); dnl define(`_CREATE_METHOD',` static Glib::RefPtr<`'__CPPNAME__`'> create(`'$1`'); _PUSH(SECTION_CC) Glib::RefPtr<`'__CPPNAME__`'> __CPPNAME__`'::create(`'$2`') { return Glib::RefPtr<`'__CPPNAME__`'>( new __CPPNAME__`'(`'$3`') ); } _POP() ') dnl dnl _END_CLASS_WNCKOBJECT() dnl denotes the end of a class dnl define(`_END_CLASS_WNCKOBJECT',` _SECTION(SECTION_HEADER1) ifdef(`__BOOL_NO_WRAP_FUNCTION__',`dnl ',`dnl _STRUCT_PROTOTYPE() ')dnl __NAMESPACE_BEGIN__ class __CPPNAME__`'_Class; __NAMESPACE_END__ _SECTION(SECTION_HEADER3) ifdef(`__BOOL_NO_WRAP_FUNCTION__',`dnl ',`dnl else namespace Glib { /** A Glib::wrap() method for this object. * * @param object The C instance. * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref. * @result A C++ instance that wraps this C instance. * * @relates __NAMESPACE__::__CPPNAME__ */ __NAMESPACE__::__CPPNAME__* wrap(__CNAME__`'* object, bool take_copy = false); } ')dnl endif dnl dnl _SECTION(SECTION_PHEADER) #include __NAMESPACE_BEGIN__ _PH_CLASS_DECLARATION() __NAMESPACE_END__ _SECTION(SECTION_SRC_GENERATED) ifdef(`__BOOL_NO_WRAP_FUNCTION__',`dnl ',`dnl else namespace Glib { __NAMESPACE__::__CPPNAME__* wrap(__CNAME__`'* object, bool take_copy) { return dynamic_cast<__NAMESPACE__::__CPPNAME__*> (Glib::wrap_auto ((GObject*)(object), take_copy)); //We use dynamic_cast<> in case of multiple inheritance. } } /* namespace Glib */ ')dnl endif __NAMESPACE_BEGIN__ /* The *_Class implementation: */ _PCC_CLASS_IMPLEMENTATION() Glib::ObjectBase* __CPPNAME__`'_Class::wrap_new(GObject* object) { return new __CPPNAME__`'((__CNAME__*)`'object); } ifdef(`__BOOL_CUSTOM_CTOR_CAST__',`dnl ',`dnl __CPPNAME__::__CPPNAME__`'(const Glib::ConstructParams& construct_params) : __CPPPARENT__`'(construct_params) { _INITIALLY_UNOWNED_SINK } __CPPNAME__::__CPPNAME__`'(__CNAME__* castitem) : __CPPPARENT__`'(__PCAST__`'(castitem)) {} ')dnl ifdef(`__BOOL_CUSTOM_DTOR__',`dnl ',`dnl __CPPNAME__::~__CPPNAME__`'() {} ')dnl _CC_CLASS_IMPLEMENTATION() __NAMESPACE_END__ dnl dnl dnl dnl _POP() dnl dnl The actual class, e.g. Gtk::Widget, declaration: dnl _IMPORT(SECTION_H_SIGNALPROXIES_CUSTOM) _IMPORT(SECTION_CLASS1) #ifndef DOXYGEN_SHOULD_SKIP_THIS public: typedef __CPPNAME__ CppObjectType; typedef __CPPNAME__`'_Class CppClassType; typedef __CNAME__ BaseObjectType; typedef __CNAME__`'Class BaseClassType; private: friend class __CPPNAME__`'_Class; static CppClassType `'__BASE__`'_class_; private: // noncopyable __CPPNAME__`'(const __CPPNAME__&); __CPPNAME__& operator=(const __CPPNAME__&); protected: explicit __CPPNAME__`'(const Glib::ConstructParams& construct_params); explicit __CPPNAME__`'(__CNAME__* castitem); #endif /* DOXYGEN_SHOULD_SKIP_THIS */ public: _IMPORT(SECTION_DTOR_DOCUMENTATION) virtual ~__CPPNAME__`'(); /** Get the GType for this class, for use with the underlying GObject type system. */ static GType get_type() G_GNUC_CONST; #ifndef DOXYGEN_SHOULD_SKIP_THIS ifdef(`__BOOL_DYNAMIC_GTYPE_REGISTRATION__',` static GType get_type(GTypeModule* module) G_GNUC_CONST; ',`') static GType get_base_type() G_GNUC_CONST; #endif ///Provides access to the underlying C GObject. __CNAME__* gobj() { return reinterpret_cast<__CNAME__*>(gobject_); } ///Provides access to the underlying C GObject. const __CNAME__* gobj() const { return reinterpret_cast<__CNAME__*>(gobject_); } private: _IMPORT(SECTION_CLASS2) public: _H_VFUNCS_AND_SIGNALS() ') libwnckmm-1.0-0.1.1/tools/m4/filelist.am0000644000175000017500000000152612257423630017544 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . files_codegen_m4 = \ convert.m4 \ convert_wnckmm.m4 \ class_wnckobject.m4 libwnckmm-1.0-0.1.1/tools/Makefile.am0000644000175000017500000000275312257241444017132 0ustar00execexec00000000000000## Copyright (c) 2013 Povilas Kanapickas ## ## This file is part of wnckmm. ## ## This library is free software; you can redistribute it and/or ## modify it under the terms of the GNU Lesser General Public ## License as published by the Free Software Foundation; either ## version 2.1 of the License, or (at your option) any later version. ## ## This library is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## Lesser General Public License for more details. ## ## You should have received a copy of the GNU Lesser General Public License ## along with this library. If not, see . AUTOMAKE_OPTIONS = subdir-objects include $(srcdir)/m4/filelist.am gmmproc_m4_includedir = $(libdir)/$(WNCKMM_MODULE_NAME)/proc/m4 dist_gmmproc_m4_include_DATA = $(addprefix m4/,$(files_codegen_m4)) noinst_PROGRAMS = extra_defs_gen/generate_defs_wnck extra_defs_gen_generate_defs_wnck_SOURCES = extra_defs_gen/generate_defs_wnck.cc extra_defs_gen_generate_defs_wnck_LDADD = $(WNCKMM_LIBS) -lglibmm_generate_extra_defs-2.4 extra_defs_gen_generate_defs_wnck_LDFLAGS = -no-undefined -avoid-version AM_CPPFLAGS = -I$(top_builddir) $(WNCKMM_CFLAGS) AM_CXXFLAGS = $(WNCKMM_CXXFLAGS) # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: libwnckmm-1.0-0.1.1/tools/Makefile.in0000664000175000017500000005472012414127605017143 0ustar00execexec00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/m4/filelist.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(top_srcdir)/m4/depcomp \ $(dist_gmmproc_m4_include_DATA) noinst_PROGRAMS = extra_defs_gen/generate_defs_wnck$(EXEEXT) subdir = tools ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = PROGRAMS = $(noinst_PROGRAMS) am__dirstamp = $(am__leading_dot)dirstamp am_extra_defs_gen_generate_defs_wnck_OBJECTS = \ extra_defs_gen/generate_defs_wnck.$(OBJEXT) extra_defs_gen_generate_defs_wnck_OBJECTS = \ $(am_extra_defs_gen_generate_defs_wnck_OBJECTS) am__DEPENDENCIES_1 = extra_defs_gen_generate_defs_wnck_DEPENDENCIES = \ $(am__DEPENDENCIES_1) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = extra_defs_gen_generate_defs_wnck_LINK = $(LIBTOOL) $(AM_V_lt) \ --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \ $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ $(extra_defs_gen_generate_defs_wnck_LDFLAGS) $(LDFLAGS) -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/m4/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) AM_V_CXX = $(am__v_CXX_@AM_V@) am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) am__v_CXX_0 = @echo " CXX " $@; am__v_CXX_1 = CXXLD = $(CXX) CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) am__v_CXXLD_0 = @echo " CXXLD " $@; am__v_CXXLD_1 = SOURCES = $(extra_defs_gen_generate_defs_wnck_SOURCES) DIST_SOURCES = $(extra_defs_gen_generate_defs_wnck_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(gmmproc_m4_includedir)" DATA = $(dist_gmmproc_m4_include_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOCINSTALL_FLAGS = @DOCINSTALL_FLAGS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DOXYGEN_TAGFILES = @DOXYGEN_TAGFILES@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GMMPROC_DIR = @GMMPROC_DIR@ GMMPROC_EXTRA_M4_DIR = @GMMPROC_EXTRA_M4_DIR@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBWNCKMM_SO_VERSION = @LIBWNCKMM_SO_VERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MMDOCTOOLDIR = @MMDOCTOOLDIR@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ WNCKMM_API_VERSION = @WNCKMM_API_VERSION@ WNCKMM_CFLAGS = @WNCKMM_CFLAGS@ WNCKMM_LIBS = @WNCKMM_LIBS@ WNCKMM_MAJOR_VERSION = @WNCKMM_MAJOR_VERSION@ WNCKMM_MICRO_VERSION = @WNCKMM_MICRO_VERSION@ WNCKMM_MINOR_VERSION = @WNCKMM_MINOR_VERSION@ WNCKMM_MODULES = @WNCKMM_MODULES@ WNCKMM_MODULE_NAME = @WNCKMM_MODULE_NAME@ WNCKMM_VERSION = @WNCKMM_VERSION@ WNCK_CFLAGS = @WNCK_CFLAGS@ WNCK_LIBS = @WNCK_LIBS@ XSLTPROC = @XSLTPROC@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = subdir-objects files_codegen_m4 = \ convert.m4 \ convert_wnckmm.m4 \ class_wnckobject.m4 gmmproc_m4_includedir = $(libdir)/$(WNCKMM_MODULE_NAME)/proc/m4 dist_gmmproc_m4_include_DATA = $(addprefix m4/,$(files_codegen_m4)) extra_defs_gen_generate_defs_wnck_SOURCES = extra_defs_gen/generate_defs_wnck.cc extra_defs_gen_generate_defs_wnck_LDADD = $(WNCKMM_LIBS) -lglibmm_generate_extra_defs-2.4 extra_defs_gen_generate_defs_wnck_LDFLAGS = -no-undefined -avoid-version AM_CPPFLAGS = -I$(top_builddir) $(WNCKMM_CFLAGS) AM_CXXFLAGS = $(WNCKMM_CXXFLAGS) all: all-am .SUFFIXES: .SUFFIXES: .cc .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/m4/filelist.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign tools/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(srcdir)/m4/filelist.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list extra_defs_gen/$(am__dirstamp): @$(MKDIR_P) extra_defs_gen @: > extra_defs_gen/$(am__dirstamp) extra_defs_gen/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) extra_defs_gen/$(DEPDIR) @: > extra_defs_gen/$(DEPDIR)/$(am__dirstamp) extra_defs_gen/generate_defs_wnck.$(OBJEXT): \ extra_defs_gen/$(am__dirstamp) \ extra_defs_gen/$(DEPDIR)/$(am__dirstamp) extra_defs_gen/generate_defs_wnck$(EXEEXT): $(extra_defs_gen_generate_defs_wnck_OBJECTS) $(extra_defs_gen_generate_defs_wnck_DEPENDENCIES) $(EXTRA_extra_defs_gen_generate_defs_wnck_DEPENDENCIES) extra_defs_gen/$(am__dirstamp) @rm -f extra_defs_gen/generate_defs_wnck$(EXEEXT) $(AM_V_CXXLD)$(extra_defs_gen_generate_defs_wnck_LINK) $(extra_defs_gen_generate_defs_wnck_OBJECTS) $(extra_defs_gen_generate_defs_wnck_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) -rm -f extra_defs_gen/*.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@extra_defs_gen/$(DEPDIR)/generate_defs_wnck.Po@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cc.lo: @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs -rm -rf extra_defs_gen/.libs extra_defs_gen/_libs install-dist_gmmproc_m4_includeDATA: $(dist_gmmproc_m4_include_DATA) @$(NORMAL_INSTALL) @list='$(dist_gmmproc_m4_include_DATA)'; test -n "$(gmmproc_m4_includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(gmmproc_m4_includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(gmmproc_m4_includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gmmproc_m4_includedir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(gmmproc_m4_includedir)" || exit $$?; \ done uninstall-dist_gmmproc_m4_includeDATA: @$(NORMAL_UNINSTALL) @list='$(dist_gmmproc_m4_include_DATA)'; test -n "$(gmmproc_m4_includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(gmmproc_m4_includedir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(DATA) installdirs: for dir in "$(DESTDIR)$(gmmproc_m4_includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -rm -f extra_defs_gen/$(DEPDIR)/$(am__dirstamp) -rm -f extra_defs_gen/$(am__dirstamp) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ mostlyclean-am distclean: distclean-am -rm -rf extra_defs_gen/$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dist_gmmproc_m4_includeDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf extra_defs_gen/$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_gmmproc_m4_includeDATA .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \ ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dist_gmmproc_m4_includeDATA \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-dist_gmmproc_m4_includeDATA # Instruct GNU make to delete the targets of a rule after it failed, in # order to avoid the complication of handling that situation manually. .DELETE_ON_ERROR: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: