X11-GUITest-0.28/0000755000000000000000000000000012311564556012004 5ustar rootrootX11-GUITest-0.28/t/0000755000000000000000000000000012311564556012247 5ustar rootrootX11-GUITest-0.28/t/test.t0000644000000000000000000001130312311306577013406 0ustar rootroot#!/usr/bin/perl # X11::GUITest ($Id: test.t 241 2014-03-16 11:39:42Z ctrondlp $) # Note: Functions that might be too intrusive are not checked BEGIN { $| = 1; # Is X info not available? if (!defined($ENV{'DISPLAY'}) || length $ENV{'DISPLAY'} <= 0) { warn "X11::GUITest - X Windows not running or DISPLAY not set.\n"; print "1..1\n"; print "ok 1\n"; exit(0); } # Testing too ambiguous for varied environments if (defined($ENV{'AUTOMATED_TESTING'}) && $ENV{'AUTOMATED_TESTING'}) { warn "X11::GUITest - Not performing extensive tests.\n"; print "1..1\n"; print "ok 1\n"; exit(0); } # Pre-checks ok, so plan on running the tests. print "1..24\n"; } END { print "not ok 1\n" unless $loaded; } use X11::GUITest qw/ :ALL /; $loaded = 1; print "ok 1\n"; use strict; use warnings; # Used for testing below my $BadWinTitle = 'BadWindowNameNotToBeFound'; my $BadWinId = '898989899'; my @Windows = (); my $HasWindows = 0; # Determine if there are windows to use. If tester # is using xvfb-run, we'll likely have 0 windows. $HasWindows = (scalar FindWindowLike(".*")); # FindWindowLike if ($HasWindows) { print "not " unless FindWindowLike(".*"); } print "not " unless not FindWindowLike($BadWinTitle); print "ok 2\n"; # WaitWindowClose print "not " unless WaitWindowClose($BadWinId); print "ok 3\n"; # WaitWindowLike if ($HasWindows) { print "not " unless WaitWindowLike(".*"); } print "not " unless not WaitWindowLike($BadWinTitle, undef, 1); print "ok 4\n"; # WaitWindowViewable if ($HasWindows) { print "not " unless WaitWindowViewable(".*"); } print "not " unless not WaitWindowViewable($BadWinTitle, undef, 1); print "ok 5\n"; # ClickWindow # StartApp # RunApp # SetEventSendDelay # GetEventSendDelay # SetKeySendDelay # GetKeySendDelay # GetWindowName my $WinName = ''; # Note: Only worry about windows that have a name # RegExp: ".+" = one or more characters foreach my $win (FindWindowLike(".+")) { # If call fails, WinName will be set to undef $WinName = GetWindowName($win); if (not defined($WinName)) { last; } } print "not " unless defined($WinName); print "ok 6\n"; # SetWindowName # GetRootWindow print "not " unless GetRootWindow(); print "ok 7\n"; # GetChildWindows if ($HasWindows) { print "not " unless GetChildWindows(GetRootWindow()); } else { print "not " unless not GetChildWindows(GetRootWindow()); } print "ok 8\n"; # MoveMouseAbs print "not " unless MoveMouseAbs(2, 2); print "ok 9\n"; # Give some respite to the X server sleep 1; # ClickMouseButton # SendKeys # IsWindow print "not " unless IsWindow(GetRootWindow()); print "not " unless not IsWindow($BadWinId); print "ok 10\n"; # IsWindowViewable if ($HasWindows) { @Windows = WaitWindowViewable(".*"); if (not IsWindow($Windows[0])) { # First window not viewable $Windows[0] = GetRootWindow(); # Fall-back to root } print "not " unless IsWindowViewable($Windows[0]); } print "not " unless not IsWindowViewable($BadWinId); print "ok 11\n"; # MoveWindow # ResizeWindow # IconifyWindow # UnIconifyWindow # Raise Window # LowerWindow # SetInputFocus # GetInputFocus print "not " unless GetInputFocus(); print "ok 12\n"; # GetWindowPos my ($x, $y, $width, $height) = GetWindowPos(GetRootWindow()); print "not " unless (defined($x) and defined($y) and defined($width) and defined($height)); print "ok 13\n"; # GetScreenRes print "not " unless GetScreenRes(); print "ok 14\n"; # GetScreenDepth print "not " unless GetScreenDepth(); print "ok 15\n"; # GetMousePos my @coords = (); print "not " unless ( @coords = GetMousePos() ); print "ok 16\n"; # IsChild if ($HasWindows) { print "not " unless ( @Windows = GetChildWindows(GetRootWindow()) ); # Note: Limiting check to a certain number of windows (10) foreach my $win ( @Windows[0..(9 < $#Windows ? 9 : $#Windows)] ) { if (!IsChild(GetRootWindow(), $win)) { print "not "; last; } } } print "ok 17\n"; # IsKeyPressed # IsMouseButtonPressed # QuoteStringForSendKeys print "not " unless defined( QuoteStringForSendKeys('~!@#$%^&*()_+') ); print "ok 18\n"; print "not " unless (QSfSK('~!@#$%^&*()_+') eq '{~}!@#${%}{^}&*{(}{)}_{+}'); print "ok 19\n"; print "not " unless not defined ( QuoteStringForSendKeys(undef) ); print "ok 20\n"; # GetParentWindow print "not " unless not GetParentWindow(GetRootWindow()); print "ok 21\n"; if ($HasWindows) { print "not " unless GetParentWindow($Windows[0]); } print "ok 22\n"; # GetWindowFromPoint # Note: Using invalid window position of (-1500 x -1500) for testing. print "not " unless not GetWindowFromPoint(-1500, -1500); print "ok 23\n"; if ($HasWindows) { print "not " unless GetWindowFromPoint(0, 0); } print "ok 24\n"; # PressKey # ReleaseKey # PressReleaseKey # PressMouseButton # ReleaseMouseButton # GetWindowPid # GetWindowsFromPid X11-GUITest-0.28/GUITest.pm0000644000000000000000000010167712311563654013640 0ustar rootroot# X11::GUITest ($Id: GUITest.pm 243 2014-03-17 12:09:14Z ctrondlp $) # # Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. # Email: ctrondlp@cpan.org # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # =head1 NAME B - Provides GUI testing/interaction routines. =head1 VERSION 0.28 Updates are made available at the following sites: http://sourceforge.net/projects/x11guitest http://www.cpan.org Please consult 'docs/Changes' for the list of changes between module revisions. =head1 DESCRIPTION This Perl package is intended to facilitate the testing of GUI applications by means of user emulation. It can be used to test/interact with GUI applications; which have been built upon the X library or toolkits (i.e., GTK+, Xt, Qt, Motif, etc.) that "wrap" the X library's functionality. A basic recorder (x11guirecord) is also available, and can be found in the source code repository. =head1 DEPENDENCIES An X server with the XTest extensions enabled. This seems to be the norm. If it is not enabled, it usually can be by modifying the X server configuration (i.e., XF86Config). The standard DISPLAY environment variable is utilized to determine the host, display, and screen to work with. By default it is usually set to ":0.0" for the localhost. However, by altering this variable one can interact with applications under a remote host's X server. To change this from a terminal window, one can utilize the following basic syntax: export DISPLAY=:. Please note that under most circumstances, xhost will need to be executed properly on the remote host as well. There is a known incompatibility between the XTest and Xinerama extensions, which causes the XTestFakeMotionEvent() function to misbehave. When the Xinerama (X server) extension is turned on, this (Perl) extension has been modified to allow one to invoke an alternative function. See Makefile.PL for details. =head1 INSTALLATION perl Makefile.PL make make test make install # If the build has errors, you may need to install the following dependencies: # libxt-dev, libxtst-dev # If you'd like to install the recorder, use these steps: cd recorder ./autogen.sh ./configure make make install x11guirecord --help =head1 SYNOPSIS For additional examples, please look under the 'eg/' sub-directory from the installation folder. use X11::GUITest qw/ StartApp WaitWindowViewable SendKeys /; # Start gedit application StartApp('gedit'); # Wait for application window to come up and become viewable. my ($GEditWinId) = WaitWindowViewable('gedit'); if (!$GEditWinId) { die("Couldn't find gedit window in time!"); } # Send text to it SendKeys("Hello, how are you?\n"); # Close Application (Alt-f, q). SendKeys('%(f)q'); # Handle gedit's Question window if it comes up when closing. Wait # at most 5 seconds for it. if (WaitWindowViewable('Question', undef, 5)) { # DoN't Save (Alt-n) SendKeys('%(n)'); } =cut package X11::GUITest; use strict; use warnings; use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS); require Exporter; require DynaLoader; #require AutoLoader; @ISA = qw(Exporter DynaLoader); # Items to export into callers namespace by default. Note: do not export # names by default without a very good reason. Use EXPORT_OK instead. # Do not simply export all your public functions/methods/constants. @EXPORT = qw( ); @EXPORT_OK = qw( ClickMouseButton ClickWindow DefaultScreen FindWindowLike GetChildWindows GetEventSendDelay GetInputFocus GetKeySendDelay GetMousePos GetParentWindow GetRootWindow GetScreenDepth GetScreenRes GetWindowFromPoint GetWindowName GetWindowPid GetWindowPos GetWindowsFromPid IconifyWindow IsChild IsKeyPressed IsMouseButtonPressed IsWindow IsWindowCursor IsWindowViewable LowerWindow MoveMouseAbs MoveWindow PressKey PressMouseButton PressReleaseKey QSfSK QuoteStringForSendKeys RaiseWindow ReleaseKey ReleaseMouseButton ResizeWindow RunApp ScreenCount SendKeys SetEventSendDelay SetInputFocus SetKeySendDelay SetWindowName StartApp UnIconifyWindow WaitSeconds WaitWindowClose WaitWindowLike WaitWindowViewable ); # Tags (:ALL, etc.) %EXPORT_TAGS = ( 'ALL' => \@EXPORT_OK, 'CONST' => [qw(DEF_WAIT M_LEFT M_MIDDLE M_RIGHT M_UP M_DOWN M_BTN1 M_BTN2 M_BTN3 M_BTN4 M_BTN5 XC_X_CURSOR XC_ARROW XC_BASED_ARROW_DOWN XC_BASED_ARROW_UP XC_BOAT XC_BOGOSITY XC_BOTTOM_LEFT_CORNER XC_BOTTOM_RIGHT_CORNER XC_BOTTOM_SIDE XC_BOTTOM_TEE XC_BOX_SPIRAL XC_CENTER_PTR XC_CIRCLE XC_CLOCK XC_COFFEE_MUG XC_CROSS XC_CROSS_REVERSE XC_CROSSHAIR XC_DIAMOND_CROSS XC_DOT XC_DOTBOX XC_DOUBLE_ARROW XC_DRAFT_LARGE XC_DRAFT_SMALL XC_DRAPED_BOX XC_EXCHANGE XC_FLEUR XC_GOBBLER XC_GUMBY XC_HAND1 XC_HAND2 XC_HEART XC_ICON XC_IRON_CROSS XC_LEFT_PTR XC_LEFT_SIDE XC_LEFT_TEE XC_LEFTBUTTON XC_LL_ANGLE XC_LR_ANGLE XC_MAN XC_MIDDLEBUTTON XC_MOUSE XC_PENCIL XC_PIRATE XC_PLUS XC_QUESTION_ARROW XC_RIGHT_PTR XC_RIGHT_SIDE XC_RIGHT_TEE XC_RIGHTBUTTON XC_RTL_LOGO XC_SAILBOAT XC_SB_DOWN_ARROW XC_SB_H_DOUBLE_ARROW XC_SB_LEFT_ARROW XC_SB_RIGHT_ARROW XC_SB_UP_ARROW XC_SB_V_DOUBLE_ARROW XC_SHUTTLE XC_SIZING XC_SPIDER XC_SPRAYCAN XC_STAR XC_TARGET XC_TCROSS XC_TOP_LEFT_ARROW XC_TOP_LEFT_CORNER XC_TOP_RIGHT_CORNER XC_TOP_SIDE XC_TOP_TEE XC_TREK XC_UL_ANGLE XC_UMBRELLA XC_UR_ANGLE XC_WATCH XC_XTERM)], ); Exporter::export_ok_tags(keys %EXPORT_TAGS); $VERSION = '0.28'; # Module Constants sub DEF_WAIT() { 10; } # Mouse Buttons sub M_BTN1() { 1; } sub M_BTN2() { 2; } sub M_BTN3() { 3; } sub M_BTN4() { 4; } sub M_BTN5() { 5; } sub M_LEFT() { M_BTN1; } sub M_MIDDLE() { M_BTN2; } sub M_RIGHT() { M_BTN3; } sub M_UP() { M_BTN4; } sub M_DOWN() { M_BTN5; } # Cursors sub XC_X_CURSOR() { 0 }; sub XC_ARROW() { 2 }; sub XC_BASED_ARROW_DOWN() { 4 }; sub XC_BASED_ARROW_UP() { 6 }; sub XC_BOAT() { 8 }; sub XC_BOGOSITY() { 10 }; sub XC_BOTTOM_LEFT_CORNER() { 12 }; sub XC_BOTTOM_RIGHT_CORNER() { 14 }; sub XC_BOTTOM_SIDE() { 16 }; sub XC_BOTTOM_TEE() { 18 }; sub XC_BOX_SPIRAL() { 20 }; sub XC_CENTER_PTR() { 22 }; sub XC_CIRCLE() { 24 }; sub XC_CLOCK() { 26 }; sub XC_COFFEE_MUG() { 28 }; sub XC_CROSS() { 30 }; sub XC_CROSS_REVERSE() { 32 }; sub XC_CROSSHAIR() { 34 }; sub XC_DIAMOND_CROSS() { 36 }; sub XC_DOT() { 38 }; sub XC_DOTBOX() { 40 }; sub XC_DOUBLE_ARROW() { 42 }; sub XC_DRAFT_LARGE() { 44 }; sub XC_DRAFT_SMALL() { 46 }; sub XC_DRAPED_BOX() { 48 }; sub XC_EXCHANGE() { 50 }; sub XC_FLEUR() { 52 }; sub XC_GOBBLER() { 54 }; sub XC_GUMBY() { 56 }; sub XC_HAND1() { 58 }; sub XC_HAND2() { 60 }; sub XC_HEART() { 62 }; sub XC_ICON() { 64 }; sub XC_IRON_CROSS() { 66 }; sub XC_LEFT_PTR() { 68 }; sub XC_LEFT_SIDE() { 70 }; sub XC_LEFT_TEE() { 72 }; sub XC_LEFTBUTTON() { 74 }; sub XC_LL_ANGLE() { 76 }; sub XC_LR_ANGLE() { 78 }; sub XC_MAN() { 80 }; sub XC_MIDDLEBUTTON() { 82 }; sub XC_MOUSE() { 84 }; sub XC_PENCIL() { 86 }; sub XC_PIRATE() { 88 }; sub XC_PLUS() { 90 }; sub XC_QUESTION_ARROW() { 92 }; sub XC_RIGHT_PTR() { 94 }; sub XC_RIGHT_SIDE() { 96 }; sub XC_RIGHT_TEE() { 98 }; sub XC_RIGHTBUTTON() { 100 }; sub XC_RTL_LOGO() { 102 }; sub XC_SAILBOAT() { 104 }; sub XC_SB_DOWN_ARROW() { 106 }; sub XC_SB_H_DOUBLE_ARROW() { 108 }; sub XC_SB_LEFT_ARROW() { 110 }; sub XC_SB_RIGHT_ARROW() { 112 }; sub XC_SB_UP_ARROW() { 114 }; sub XC_SB_V_DOUBLE_ARROW() { 116 }; sub XC_SHUTTLE() { 118 }; sub XC_SIZING() { 120 }; sub XC_SPIDER() { 122 }; sub XC_SPRAYCAN() { 124 }; sub XC_STAR() { 126 }; sub XC_TARGET() { 128 }; sub XC_TCROSS() { 130 }; sub XC_TOP_LEFT_ARROW() { 132 }; sub XC_TOP_LEFT_CORNER() { 134 }; sub XC_TOP_RIGHT_CORNER() { 136 }; sub XC_TOP_SIDE() { 138 }; sub XC_TOP_TEE() { 140 }; sub XC_TREK() { 142 }; sub XC_UL_ANGLE() { 144 }; sub XC_UMBRELLA() { 146 }; sub XC_UR_ANGLE() { 148 }; sub XC_WATCH() { 150 }; sub XC_XTERM() { 152 }; # Module Variables bootstrap X11::GUITest $VERSION; =head1 FUNCTIONS Parameters enclosed within [] are optional. If there are multiple optional parameters available for a function and you would like to specify the last one, for example, you can utilize undef for those parameters you don't specify. REGEX in the documentation below denotes an item that is treated as a regular expression. For example, the regex "^OK$" would look for an exact match for the word OK. =over 8 =item FindWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] Finds the window Ids of the windows matching the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = FindWindowLike('gedit'); # Only worry about first window found my ($WindowId) = FindWindowLike('gedit'); =back =cut my $FindWindowLikeAux = sub { my $titlerx = shift; my $start = shift; my $winname = ''; my @wins = (); # Match the starting window??? $winname = GetWindowName($start); if (defined $winname && $winname =~ /$titlerx/i) { push @wins, $start; } # Match a child window? foreach my $child (GetChildWindows($start)) { $winname = GetWindowName($child); if (defined $winname && $winname =~ /$titlerx/i) { push @wins, $child; } } return(@wins); }; sub FindWindowLike { my $titlerx = shift; my $start = shift; if (defined $start) { return &$FindWindowLikeAux($titlerx, $start); } else { my @wins = (); for (my $i = ScreenCount() - 1; $i >= 0 ; --$i) { push @wins, &$FindWindowLikeAux($titlerx, GetRootWindow($i)); } return(@wins); } } =over 8 =item WaitWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Waits for a window to come up that matches the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. One can optionally specify an alternative wait amount in seconds. A window will keep being looked for that matches the specified title regex until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. If a window is going to be manipulated by input, WaitWindowViewable is the more robust solution to utilize. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = WaitWindowLike('gedit'); # Only worry about first window found my ($WindowId) = WaitWindowLike('gedit'); WaitWindowLike('gedit') or die("gedit window not found!"); =back =cut sub WaitWindowLike { my $titlerx = shift; my $start = shift; my $wait = shift || DEF_WAIT; my @wins = (); # For each second we $wait, look for window title once. for (my $i = 0; $i < $wait; $i++) { my @wins = FindWindowLike($titlerx, $start); if (@wins) { return(@wins); } # Wait 1 sec in order not to bog down the system select(undef, undef, undef, 1); } # Nothing return(@wins); } =over 8 =item WaitWindowViewable TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Similar to WaitWindow, but only recognizes windows that are viewable. When GUI applications are started, their window isn't necessarily viewable yet, let alone available for input, so this function is very useful. Likewise, this function will only return an array of the matching window Ids for those windows that are viewable. An empty array is returned if no matches were found. =back =cut sub WaitWindowViewable { my $titlerx = shift; my $start = shift; my $wait = shift || DEF_WAIT; my @wins = (); # For each second we $wait, look for window title once. for (my $i = 0; $i < $wait; $i++) { # Find windows, but recognize only those that are viewable foreach my $win (FindWindowLike($titlerx, $start)) { if (IsWindowViewable($win)) { push @wins, $win; } } if (@wins) { return(@wins); } # Wait 1 sec in order not to bog down the system. select(undef, undef, undef, 1); } # Nothing return(@wins); } =over 8 =item WaitWindowClose WINDOWID [, MAXWAITINSECONDS] Waits for the specified window to close. One can optionally specify an alternative wait amount in seconds. The window will keep being checked to see if it has closed until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. zero is returned if window is not gone, non-zero if it is gone. =back =cut sub WaitWindowClose { my $win = shift; my $wait = shift || DEF_WAIT; # For each second we $wait, check window Id # twice (2 lookups * 500ms = ~1 second). for (my $i = 0; $i < ($wait * 2); $i++) { if (not IsWindow($win)) { # Success, window isn't recognized return(1); } # Wait 500 ms in order not to bog down the system. If one # changes this, the ($wait * 2) above will want to be changed # in order to represent seconds correctly. select(undef, undef, undef, 0.50); } # Failure return(0); } =over 8 =item WaitSeconds SECONDS Pauses execution for the specified amount of seconds. WaitSeconds(0.5); # Wait 1/2 second WaitSeconds(3); # Wait 3 seconds =back =cut sub WaitSeconds { select(undef, undef, undef, shift); } =over 8 =item ClickWindow WINDOWID [, X Offset] [, Y Offset] [, Button] Clicks on the specified window with the mouse. Optionally one can specify the X offset and Y offset. By default, the top left corner of the window is clicked on, with these two parameters one can specify a different position to be clicked on. One can also specify an alternative button. The default button is M_LEFT, but M_MIDDLE and M_RIGHT may be specified too. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success =back =cut sub ClickWindow { my $win = shift; my $x_offset = shift || 0; my $y_offset = shift || 0; my $button = shift || M_LEFT; my ($x, $y, $scr); ($x, $y, undef, undef, undef, $scr) = GetWindowPos($win); if (!defined($x) or !defined($y)) { return(0); } if (!MoveMouseAbs($x + $x_offset, $y + $y_offset, $scr)) { return(0); } if (!ClickMouseButton($button)) { return(0); } return(1); } =over 8 =item GetWindowsFromPid Returns a list of window ids discovered for the specified process id (pid). undef is returned on error. =back =cut sub GetWindowsFromPid { my $pid = shift; my @wins = (); if ($pid <= 0) { return(undef); } my @all_wins = FindWindowLike('.*'); foreach my $aw (@all_wins) { my $aw_pid = GetWindowPid($aw); if ($aw_pid == $pid) { push @wins, $aw; } } return(@wins); } =over 8 =item GetWindowFromPoint X, Y [, SCREEN] Returns the window that is at the specified point. If no screen is given, it is taken from the value given when opening the X display. zero is returned if there are no matches (i.e., off screen). =back =cut sub GetWindowFromPoint { my $x = shift; my $y = shift; my $scr = shift; my $lastmatch = 0; if ( ! defined $scr) { $scr = DefaultScreen(); } # Note: Windows are returned in current stacking order, therefore # the last match should be the top-most window. foreach my $win ( GetChildWindows(GetRootWindow($scr)) ) { my ($w_x1, $w_y1, $w_w, $w_h, $w_b) = GetWindowPos($win); # Is window position invalid? if (!defined $w_x1) { next; } my $w_x2 = ($w_x1 + $w_w + ($w_b << 1)); my $w_y2 = ($w_y1 + $w_h + ($w_b << 1)); # Does window match our point? if ($x >= $w_x1 && $x < $w_x2 && $y >= $w_y1 && $y < $w_y2) { $lastmatch = $win; } } return($lastmatch); } =over 8 =item IsChild PARENTWINDOWID, WINDOWID Determines if the specified window is a child of the specified parent. zero is returned for false, non-zero for true. =back =cut sub IsChild { my $parent = shift; my $win = shift; foreach my $child ( GetChildWindows($parent) ) { if ($child == $win && $child != $parent) { return(1); } } return(0); } =over 8 =item QuoteStringForSendKeys STRING Quotes {} characters in the specified string that would be interpreted as having special meaning if sent to SendKeys directly. This function would be useful if you had a text file in which you wanted to use each line of the file as input to the SendKeys function, but didn't want any special interpretation of the characters in the file. Returns the quoted string, undef is returned on error. # Quote ~, %, etc. as {~}, {%}, etc for literal use in SendKeys. SendKeys( QuoteStringForSendKeys('Hello: ~%^(){}+#') ); SendKeys( QSfSK('#+#') ); The international AltGr key - modifier character (&) is not escaped by this function. Escape this character manually ("{&}"), if used/needed. =back =cut sub QuoteStringForSendKeys { my $str = shift; if (!defined($str)) { return(undef); } # Quote {} special characters (^, %, (, {, etc.) $str =~ s/(\^|\%|\+|\~|\(|\)|\{|\})/\{$1\}/gm; return($str); } sub QSfSK { return QuoteStringForSendKeys(shift); } =over 8 =item StartApp COMMANDLINE Uses the shell to execute a program. This function returns as soon as the program is called. Useful for starting GUI /applications and then going on to work with them. zero is returned on failure, non-zero for success StartApp('gedit'); =back =cut sub StartApp { my @cmd = @_; my $pid = fork; if ($pid) { use POSIX qw(WNOHANG); sleep 1; waitpid($pid, WNOHANG) != $pid and kill(0, $pid) == 1 and return $pid; } elsif (defined $pid) { use POSIX qw(_exit); exec @cmd or _exit(1); } return; } =over 8 =item RunApp COMMANDLINE Uses the shell to execute a program until its completion. Return value will be application specific, however -1 is returned to indicate a failure in starting the program. RunApp('/work/myapp'); =back =cut sub RunApp { my $cmdline = shift; return( system($cmdline) ); } =over 8 =item ClickMouseButton BUTTON Clicks the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. =back =cut sub ClickMouseButton { my $button = shift; if (!PressMouseButton($button) || !ReleaseMouseButton($button)) { return(0); } return(1); } # Subroutine: INIT # Description: Used to initialize the underlying mechanisms # that this package utilizes. # Note: Perl idiom not to return values for this subroutine. sub INIT { if (!defined($ENV{'AUTOMATED_TESTING'}) || $ENV{'AUTOMATED_TESTING'} ne 1) { InitGUITest(); } } # Subroutine: END # Description: Used to deinitialize the underlying mechanisms # that this package utilizes. # Note: Perl idiom not to return values for this subroutine. sub END { DeInitGUITest(); } =over 8 =item DefaultScreen Returns the screen number specified in the X display value used to open the display. Leverages the Xlib macro of the same name. =back =cut =over 8 =item ScreenCount Returns the number of screens in the X display specified when opening it. Leverages the Xlib macro of the same name. =back =cut =over 8 =item SetEventSendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between events being sent to the X display. It is usually not a good idea to set this to 0. Please note that this delay will also affect SendKeys. Returns the old delay amount in milliseconds. =back =cut =over 8 =item GetEventSendDelay Returns the current event sending delay amount in milliseconds. =back =cut =over 8 =item SetKeySendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between keystrokes. Returns the old delay amount in milliseconds. =back =cut =over 8 =item GetKeySendDelay Returns the current keystroke sending delay amount in milliseconds. =back =cut =over 8 =item GetWindowName WINDOWID Returns the window name for the specified window Id. undef is returned if name could not be obtained. # Return the name of the window that has the input focus. my $WinName = GetWindowName(GetInputFocus()); =back =cut =over 8 =item GetWindowPid WINDOWID Returns the process id (pid) associated with the specified window. 0 is returned if the pid is not available. # Return the pid of the window that has the input focus. my $pid = GetWindowPid(GetInputFocus()); =back =cut =over 8 =item SetWindowName WINDOWID, NAME Sets the window name for the specified window Id. zero is returned on failure, non-zero for success. =back =cut =over 8 =item GetRootWindow [SCREEN] Returns the Id of the root window of the screen. This is the top/root level window that all other windows are under. If no screen is given, it is taken from the value given when opening the X display. =back =cut =over 8 =item GetChildWindows WINDOWID Returns an array of the child windows for the specified window Id. If it detects that the window hierarchy is in transition, it will wait half a second and try again. =back =cut =over 8 =item MoveMouseAbs X, Y [, SCREEN] Moves the mouse cursor to the specified absolute position in the optionally given screen. If no screen is given, it is taken from the value given when opening the X display. Zero is returned on failure, non-zero for success. =back =cut =over 8 =item GetMousePos Returns an array containing the position and the screen (number) of the mouse cursor. my ($x, $y, $scr_num) = GetMousePos(); =back =cut =over 8 =item PressMouseButton BUTTON Presses the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. =back =cut =over 8 =item ReleaseMouseButton BUTTON Releases the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. =back =cut =over 8 =item SendKeys KEYS Sends keystrokes to the window that has the input focus. The keystrokes to send are those specified in KEYS parameter. Some characters have special meaning, they are: Modifier Keys: ^ CTRL % ALT + SHIFT # META & ALTGR Other Keys: ~ ENTER \n ENTER \t TAB ( and ) MODIFIER GROUPING { and } QUOTE / ESCAPE CHARACTERS Simply, one can send a text string like so: SendKeys('Hello, how are you today?'); Parenthesis allow a modifier to work on one or more characters. For example: SendKeys('%(f)q'); # Alt-f, then press q SendKeys('%(fa)^(m)'); # Alt-f, Alt-a, Ctrl-m SendKeys('+(abc)'); # Uppercase ABC using shift modifier SendKeys('^(+(l))'); # Ctrl-Shift-l SendKeys('+'); # Press shift Braces are used to quote special characters, for utilizing aliased key names, or for special functionality. Multiple characters can be specified in a brace by space delimiting the entries. Characters can be repeated using a number that is space delimited after the preceding key. Quote Special Characters SendKeys('{{}'); # { SendKeys('{+}'); # + SendKeys('{#}'); # # You can also use QuoteStringForSendKeys (QSfSK) to perform quoting. Aliased Key Names SendKeys('{BAC}'); # Backspace SendKeys('{F1 F2 F3}'); # F1, F2, F3 SendKeys('{TAB 3}'); # Press TAB 3 times SendKeys('{SPC 3 a b c}'); # Space 3 times, a, b, c Special Functionality # Pause execution for 500 milliseconds SendKeys('{PAUSE 500}'); Combinations SendKeys('abc+(abc){TAB PAUSE 500}'); # a, b, c, A, B, C, Tab, Pause 500 SendKeys('+({a b c})'); # A, B, C The following abbreviated key names are currently recognized within a brace set. If you don't see the desired key, you can still use the unabbreviated name for the key. If you are unsure of this name, utilize the xev (X event view) tool, press the key you want and look at the tools output for the name of that key. Names that are in the list below can be utilized regardless of case. Ones that aren't in this list are going to be case sensitive and also not abbreviated. For example, using 'xev' you will find that the name of the backspace key is BackSpace, so you could use {BackSpace} in place of {bac} if you really wanted to. Name Action ------------------- BAC BackSpace BS BackSpace BKS BackSpace BRE Break CAN Cancel CAP Caps_Lock DEL Delete DOWN Down END End ENT Return ESC Escape F1 F1 ... ... F12 F12 HEL Help HOM Home INS Insert LAL Alt_L LMA Meta_L LCT Control_L LEF Left LSH Shift_L LSK Super_L MNU Menu NUM Num_Lock PGD Page_Down PGU Page_Up PRT Print RAL Alt_R RMA Meta_R RCT Control_R RIG Right RSH Shift_R RSK Super_R SCR Scroll_Lock SPA Space SPC Space TAB Tab UP Up zero is returned on failure, non-zero for success. For configurations (Xvfb) that don't support Alt_Left, Meta_Left is automatically used in its place. =back =cut =over 8 =item PressKey KEY Presses the specified key. One can utilize the abbreviated key names from the table listed above as outlined in the following example: # Alt-n PressKey('LAL'); # Left Alt PressKey('n'); ReleaseKey('n'); ReleaseKey('LAL'); # Uppercase a PressKey('LSH'); # Left Shift PressKey('a'); ReleaseKey('a'); ReleaseKey('LSH'); The ReleaseKey calls in the above example are there to set both key states back. zero is returned on failure, non-zero for success. =back =cut =over 8 =item ReleaseKey KEY Releases the specified key. Normally follows a PressKey call. One can utilize the abbreviated key names from the table listed above. ReleaseKey('n'); zero is returned on failure, non-zero for success. =back =cut =over 8 =item PressReleaseKey KEY Presses and releases the specified key. One can utilize the abbreviated key names from the table listed above. PressReleaseKey('n'); This function is affected by the key send delay. zero is returned on failure, non-zero for success. =back =cut =over 8 =item IsKeyPressed KEY Determines if the specified key is currently being pressed. You can specify such things as 'bac' or the unabbreviated form 'BackSpace' as covered in the SendKeys information. Brace forms such as '{bac}' are unsupported. A '{' is taken literally and letters are case sensitive. if (IsKeyPressed('esc')) { # Is Escape pressed? if (IsKeyPressed('a')) { # Is a pressed? if (IsKeyPressed('A')) { # Is A pressed? Returns non-zero for true, zero for false. =back =cut =over 8 =item IsMouseButtonPressed BUTTON Determines if the specified mouse button is currently being pressed. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. if (IsMouseButtonPressed(M_LEFT)) { # Is left button pressed? Returns non-zero for true, zero for false. =back =cut =over 8 =item IsWindow WINDOWID zero is returned if the specified window Id is not for something that can be recognized as a window. non-zero is returned if it looks like a window. =back =cut =over 8 =item IsWindowViewable WINDOWID zero is returned if the specified window Id is for a window that isn't viewable. non-zero is returned if the window is viewable. =back =cut =over 8 =item IsWindowCursor WINDOWID CURSOR Determines if the specified window has the specified cursor. zero is returned for false, non-zero for true. The following cursors are available through the :CONST export tag. Name ------------------- XC_NUM_GLYPHS XC_X_CURSOR XC_ARROW XC_BASED_ARROW_DOWN XC_BASED_ARROW_UP XC_BOAT XC_BOGOSITY XC_BOTTOM_LEFT_CORNER XC_BOTTOM_RIGHT_CORNER XC_BOTTOM_SIDE XC_BOTTOM_TEE XC_BOX_SPIRAL XC_CENTER_PTR XC_CIRCLE XC_CLOCK XC_COFFEE_MUG XC_CROSS XC_CROSS_REVERSE XC_CROSSHAIR XC_DIAMOND_CROSS XC_DOT XC_DOTBOX XC_DOUBLE_ARROW XC_DRAFT_LARGE XC_DRAFT_SMALL XC_DRAPED_BOX XC_EXCHANGE XC_FLEUR XC_GOBBLER XC_GUMBY XC_HAND1 XC_HAND2 XC_HEART XC_ICON XC_IRON_CROSS XC_LEFT_PTR XC_LEFT_SIDE XC_LEFT_TEE XC_LEFTBUTTON XC_LL_ANGLE XC_LR_ANGLE XC_MAN XC_MIDDLEBUTTON XC_MOUSE XC_PENCIL XC_PIRATE XC_PLUS XC_QUESTION_ARROW XC_RIGHT_PTR XC_RIGHT_SIDE XC_RIGHT_TEE XC_RIGHTBUTTON XC_RTL_LOGO XC_SAILBOAT XC_SB_DOWN_ARROW XC_SB_H_DOUBLE_ARROW XC_SB_LEFT_ARROW XC_SB_RIGHT_ARROW XC_SB_UP_ARROW XC_SB_V_DOUBLE_ARROW XC_SHUTTLE XC_SIZING XC_SPIDER XC_SPRAYCAN XC_STAR XC_TARGET XC_TCROSS XC_TOP_LEFT_ARROW XC_TOP_LEFT_CORNER XC_TOP_RIGHT_CORNER XC_TOP_SIDE XC_TOP_TEE XC_TREK XC_UL_ANGLE XC_UMBRELLA XC_UR_ANGLE XC_WATCH XC_XTERM =back =cut =over 8 =item MoveWindow WINDOWID, X, Y Moves the window to the specified location. zero is returned on failure, non-zero for success. =back =cut =over 8 =item ResizeWindow WINDOWID, WIDTH, HEIGHT Resizes the window to the specified size. zero is returned on failure, non-zero for success. =back =cut =over 8 =item IconifyWindow WINDOWID Minimizes (Iconifies) the specified window. zero is returned on failure, non-zero for success. =back =cut =over 8 =item UnIconifyWindow WINDOWID Unminimizes (UnIconifies) the specified window. zero is returned on failure, non-zero for success. =back =cut =over 8 =item RaiseWindow WINDOWID Raises the specified window to the top of the stack, so that no other windows cover it. zero is returned on failure, non-zero for success. =back =cut =over 8 =item LowerWindow WINDOWID Lowers the specified window to the bottom of the stack, so other existing windows will cover it. zero is returned on failure, non-zero for success. =back =cut =over 8 =item GetInputFocus Returns the window that currently has the input focus. =back =cut =over 8 =item SetInputFocus WINDOWID Sets the specified window to be the one that has the input focus. zero is returned on failure, non-zero for success. =back =cut =over 8 =item GetWindowPos WINDOWID Returns an array containing the position information for the specified window. It also returns size information (including border width) and the number of the screen where the window resides. my ($x, $y, $width, $height, $borderWidth, $screen) = GetWindowPos(GetRootWindow()); =back =cut =over 8 =item GetParentWindow WINDOWID Returns the parent of the specified window. zero is returned if parent couldn't be determined (i.e., root window). =back =cut =over 8 =item GetScreenDepth [SCREEN] Returns the color depth for the screen. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, -1 will be returned. Value is represented as bits, i.e. 16. my $depth = GetScreenDepth(); =back =cut =over 8 =item GetScreenRes [SCREEN] Returns the screen resolution. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, the returned list will be empty. my ($x, $y) = GetScreenRes(); =back =cut =head1 OTHER DOCUMENTATION =begin html Module Changes
Coding-Style Guidelines
ToDo List
Copy of the GPL License
=end html =begin text Available under the docs sub-directory. CodingStyle (Coding-Style Guidelines) Copying (Copy of the GPL License) =end text =begin man Not installed. =end man =head1 COPYRIGHT Copyright(c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License. =head1 AUTHOR Dennis K. Paulsen (Iowa USA) =head1 CONTRIBUTORS Paulo E. Castro =head1 CREDITS Thanks to everyone; including those specifically mentioned below for patches, suggestions, etc.: David Dick Alexey Tourbin Richard Clamp Gustav Larsson Nelson D. Caro =cut # Autoload methods go after __END__, and are processed by the autosplit program. # Return success 1; __END__ X11-GUITest-0.28/ToDo0000644000000000000000000000144712264250157012576 0ustar rootrootX11::GUITest ($Id: ToDo 226 2013-02-05 23:57:21Z pecastro $) This is a list of Todo items. -------------------------------------------------------------------- - Be able to obtain a widget's text. For example, if we could obtain the label text of a button, we could then locate its position and use ClickWindow to click on it rather then using ClickWindow with pre-known offsets or even SendKeys. I've looked at such things as XtWindowToWidget, XFetchName, XtGetValues. The EditRes protocol is not generic enough and requires the support of the client application. Could look at spying on the X server to find this information or use AT-SPI. - Ensure alternatively mapped mouse buttons are handled appropriately. -------------------------------------------------------------------- X11-GUITest-0.28/eg/0000755000000000000000000000000012311564556012377 5ustar rootrootX11-GUITest-0.28/eg/WebBrowser_1.pl0000755000000000000000000000450712264250157015242 0ustar rootroot#!/usr/bin/perl #----------------------------------------------------------------------# # X11::GUITest ($Id: WebBrowser_1.pl 206 2011-05-15 13:24:11Z ctrondlp $) # Notes: Basic interaction with Mozilla (Web Browser). Tested using # v1.2.1 of the application under the English language. #----------------------------------------------------------------------# ## Pragmas/Directives/Diagnostics ## use strict; use warnings; ## Imports (use [MODULE] qw/[IMPORTLIST]/;) ## use X11::GUITest qw/ StartApp FindWindowLike WaitWindowClose WaitWindowViewable SendKeys SetEventSendDelay /; ## Constants (sub [CONSTANT]() { [VALUE]; }) ## ## Variables (my [SIGIL][VARIABLE] = [INITIALVALUE];) ## my $MainWin = 0; my $AlertWin = 0; my $AboutWin = 0; ## Core ## print "$0 : Script Start\n"; # Slow event sending down a little for when X server # is busy with this and other bigger applications SetEventSendDelay(20); # Make sure Mozilla isn't already running # even though we could find a way around # other instances of it. if (FindWindowLike('Mozilla Firefox')) { die('Mozilla Firefox window is already open!'); } # Start the application StartApp('firefox'); # Wait at most 20 seconds for it to come up ($MainWin) = WaitWindowViewable('Mozilla Firefox', undef, 20) or die('Could not find browser window!'); # If an alert window presents itself within 5 seconds, close it if ( (($AlertWin) = WaitWindowViewable('Alert', undef, 5)) ) { SendKeys('{SPC}'); WaitWindowClose($AlertWin) or die('Could not close Alert window!'); } # Select web address bar and go to a website SendKeys('^(l)'); SendKeys("http://sourceforge.net/projects/x11guitest\n"); # Wait for website page to start coming up WaitWindowViewable('X11::GUITest') or die('Could not find website page!'); # Give page time to finish loading, so we can interact with the shortcut keys # again. Hopefully we can find a better way in the future rather then hard waits. sleep(15); # Open About Mozilla Window SendKeys('%(h)a'); # Alt-h, a ($AboutWin) = WaitWindowViewable('About.*Mozilla') or die('Could not find About window!'); # Now close it SendKeys('%(c)'); WaitWindowClose($AboutWin) or die('Could not close About window!'); # Close main Mozilla window SendKeys('^(w)'); WaitWindowClose($MainWin) or die('Could not close Mozilla window!'); print "$0 : Script End (Success)\n"; ## Subroutines ## X11-GUITest-0.28/eg/templates/0000755000000000000000000000000012311564556014375 5ustar rootrootX11-GUITest-0.28/eg/templates/ScriptTemplate.pl0000644000000000000000000000121412264250157017664 0ustar rootroot#!/usr/bin/perl #-----------------------------------------------------------------------------# # X11::GUITest ($Id: ScriptTemplate.pl 203 2011-05-15 02:03:11Z ctrondlp $) # Notes: #-----------------------------------------------------------------------------# ## Pragmas/Directives/Diagnostics ## use strict; use warnings; ## Imports (use [MODULE] qw/[IMPORTLIST]/;) ## use X11::GUITest qw/ /; ## Constants (sub [CONSTANT]() { [VALUE]; }) ## ## Variables (my [SIGIL][VARIABLE] = [INITIALVALUE];) ## ## Core ## print "$0 : Script Start\n"; print "This script serves as a template.\n"; print "$0 : Script End (Success)\n"; ## Subroutines ## X11-GUITest-0.28/eg/extras/0000755000000000000000000000000012311564556013705 5ustar rootrootX11-GUITest-0.28/eg/extras/FindControlVisually.pl0000755000000000000000000000347212302364373020220 0ustar rootroot#!/usr/bin/perl #-----------------------------------------------------------------------------# # X11::GUITest ($Id: FindControlVisually.pl 236 2014-02-23 12:26:34Z ctrondlp $) # Notes: Example of script to locate a widget/control visually using an # image baseline. #-----------------------------------------------------------------------------# ## Pragmas/Directives/Diagnostics ## use strict; use warnings; ## Imports (use [MODULE] qw/[IMPORTLIST]/;) ## use File::Temp qw/:POSIX/; use Image::SubImageFind qw/FindSubImage/; use X11::GUITest qw/ MoveMouseAbs ClickMouseButton :CONST /; ## Constants (sub [CONSTANT]() { [VALUE]; }) ## ## Variables (my [SIGIL][VARIABLE] = [INITIALVALUE];) ## ## Core ## print "$0 : Script Start\n"; print "Locating the control...\n"; # Find the control on-screen using baseline image to compare to my ($x, $y) = FindScreenObject('/test/but_superscript.png'); if ($x > 0 || $y > 0) { print "Found at $x X $y\n"; #MoveMouseAbs $x, $y; #ClickMouseButton M_LEFT; } else { print "Not found\n"; } print "$0 : Script End (Success)\n"; ## Subroutines ## sub FindScreenObject { my $baseline = shift; # baseline sub-image/clip to find on screen my $maxwait = shift || 30; # seconds to wait for discovery if (!-e $baseline) { die("Baseline $baseline image does not exist"); } my $scrfile = GetScreenshot(); for (my $i = 1; $i <= $maxwait; $i++) { # Results may vary, depending on baseline quality and detail, etc. # In general, a larger (50x50 pixels) baseline with good detail will fair good. my ($x, $y) = FindSubImage($scrfile, $baseline); if ($x > 0 || $y > 0) { unlink $scrfile; return ($x, $y); } sleep(1); } unlink $scrfile; return (-1,-1); } sub GetScreenshot { my $file = tmpnam(); my $cmd = `xwd -root | convert xwd:- $file`; return $file; } X11-GUITest-0.28/eg/FindWindowLike.pl0000755000000000000000000000246412264250157015616 0ustar rootroot#!/usr/bin/perl #-----------------------------------------------------------------------------# # X11::GUITest ($Id: FindWindowLike.pl 203 2011-05-15 02:03:11Z ctrondlp $) # Notes: Example usage of FindWindowLike #-----------------------------------------------------------------------------# ## Pragmas/Directives/Diagnostics ## use strict; use warnings; ## Imports (use [MODULE] qw/[IMPORTLIST]/;) ## use X11::GUITest qw/ FindWindowLike GetWindowName /; ## Constants (sub [CONSTANT]() { [VALUE]; }) ## ## Variables (my [SIGIL][VARIABLE] = [INITIALVALUE];) ## my @wins = (); ## Core ## print "$0 : Script Start\n"; # Get list of Ids for all windows # (RegExp: .* = zero or more characters, so it will pick up on nameless windows also) @wins = FindWindowLike('.*') or die("Didn't find any windows!"); # Alternatively, one may use the following syntax in a script if there is # interest in a specific window: # my ($win) = FindWindowLike('My Window'); print "FindWindowLike found " . @wins . " window(s).\n"; print "Press to display a list of these window(s)."; readline(*STDIN); # Output a little information for each window foreach my $win (@wins) { my $name = GetWindowName($win) || '[NO NAME]'; print "\t" . sprintf("0x%X", $win) . " ($name)\n"; } print "$0 : Script End (Success)\n"; ## Subroutines ## X11-GUITest-0.28/eg/TextEditor_1.pl0000755000000000000000000000441412264250157015251 0ustar rootroot#!/usr/bin/perl #----------------------------------------------------------------------# # X11::GUITest ($Id: TextEditor_1.pl 203 2011-05-15 02:03:11Z ctrondlp $) # Notes: Example of interaction with gedit (Text Editor). Tested with # version 2.2.0 of the editor application using the English # language. #----------------------------------------------------------------------# ## Pragmas/Directives/Diagnostics ## use strict; use warnings; ## Imports (use [MODULE] qw/[IMPORTLIST]/;) ## use X11::GUITest qw/ StartApp WaitWindowClose WaitWindowViewable SendKeys ClickWindow GetWindowName /; ## Constants (sub [CONSTANT]() { [VALUE]; }) ## ## Variables (my [SIGIL][VARIABLE] = [INITIALVALUE];) ## my $GEMainWin = 0; my $GEAboutWin = 0; ## Core ## print "$0 : Script Start\n"; # Start the text editor StartApp('gedit'); # Wait for it to appear within 120 seconds. RegEx: .* = zero or more of any character. ( ($GEMainWin) = WaitWindowViewable('Un.*gedit', undef, 120) ) or die('Unable to find editor window!'); # Send some text to the editor (TEXT x NUM TIMES) SendKeys("Hello, how are you today?\n" x 2) or die('Unable to send text to editor!'); # Ensure the window changes its name to include the # 'modified' word since we sent it text above. (GetWindowName($GEMainWin) =~ /(modified|\*Unsaved)/i) or die('Editor did not switch its title as expected!'); # Using shortcuts (Alt-h, a), open about box and wait for it SendKeys('%(h)a'); ( ($GEAboutWin) = WaitWindowViewable('About gedit') ) or die('Unable to find about box!'); # Close about box (Alt-o (old) and Alt-c (new)) using shortcut for OK button. SendKeys('%(o)%(c)'); # To be safe, ensure about box is closed before we continue WaitWindowClose($GEAboutWin); # Now close the editor using menu short-cuts SendKeys('%(f)q'); # Wait for confirmation window to appear # New gedit may not have this text. May need to implement screen capture sooner then later. WaitWindowViewable('Question'); # or die('Unable to find confirmation (Question) window!'); # Select DoN't Save or Close without Saving (new) SendKeys('%(n)%(w)') or die('Unable to select Don\'t Save button!'); # Ensure main window gets closed WaitWindowClose($GEMainWin) or die('The editor window did not close!'); print "$0 : Script End (Success)\n"; ## Subroutines ## X11-GUITest-0.28/META.json0000644000000000000000000000174712311564556013436 0ustar rootroot{ "abstract" : "Collection of functions for X11 GUI testing/interaction.", "author" : [ "Dennis K. Paulsen " ], "dynamic_config" : 1, "generated_by" : "ExtUtils::MakeMaker version 6.72, CPAN::Meta::Converter version 2.132140", "license" : [ "gpl_2" ], "meta-spec" : { "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec", "version" : "2" }, "name" : "X11-GUITest", "no_index" : { "directory" : [ "t", "inc" ] }, "prereqs" : { "build" : { "requires" : { "ExtUtils::MakeMaker" : "0" } }, "configure" : { "requires" : { "ExtUtils::MakeMaker" : "0" } }, "runtime" : { "requires" : {} } }, "release_status" : "stable", "resources" : { "repository" : { "url" : "https://x11guitest.svn.sourceforge.net/svnroot/x11guitest" } }, "version" : "0.28" } X11-GUITest-0.28/MANIFEST0000644000000000000000000000174412311564556013143 0ustar rootrootChanges Common.h docs/CodingStyle docs/Copying docs/X11-GUITest.html docs/X11-GUITest.txt eg/extras/FindControlVisually.pl eg/FindWindowLike.pl eg/templates/ScriptTemplate.pl eg/TextEditor_1.pl eg/WebBrowser_1.pl GUITest.h GUITest.pm GUITest.xs KeyUtil.c KeyUtil.h Makefile.PL MANIFEST This list of files README recorder/aclocal.m4 recorder/autogen.sh recorder/config.h.in recorder/configure recorder/configure.ac recorder/depcomp recorder/install-sh recorder/Makefile.am recorder/Makefile.in recorder/man/Makefile.am recorder/man/Makefile.in recorder/man/x11guirecord.1 recorder/missing recorder/src/main.c recorder/src/main.h recorder/src/Makefile.am recorder/src/Makefile.in recorder/src/record.c recorder/src/record.h recorder/src/record_event.h recorder/src/script_file.c recorder/src/script_file.h t/test.t ToDo typemap META.yml Module YAML meta-data (added by MakeMaker) META.json Module JSON meta-data (added by MakeMaker) X11-GUITest-0.28/typemap0000644000000000000000000000022212264250157013376 0ustar rootroot# X11::GUITest ($Id: typemap 209 2011-05-16 01:09:04Z ctrondlp $) BOOL T_IV Window T_UV Cursor T_UV UINT T_UV ULONG T_UV KeySym T_UV X11-GUITest-0.28/META.yml0000644000000000000000000000111512311564556013253 0ustar rootroot--- abstract: 'Collection of functions for X11 GUI testing/interaction.' author: - 'Dennis K. Paulsen ' build_requires: ExtUtils::MakeMaker: 0 configure_requires: ExtUtils::MakeMaker: 0 dynamic_config: 1 generated_by: 'ExtUtils::MakeMaker version 6.72, CPAN::Meta::Converter version 2.132140' license: gpl meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html version: 1.4 name: X11-GUITest no_index: directory: - t - inc requires: {} resources: repository: https://x11guitest.svn.sourceforge.net/svnroot/x11guitest version: 0.28 X11-GUITest-0.28/README0000644000000000000000000006456712311564000012666 0ustar rootrootNAME X11::GUITest - Provides GUI testing/interaction routines. VERSION 0.28 Updates are made available at the following sites: http://sourceforge.net/projects/x11guitest http://www.cpan.org Please consult 'docs/Changes' for the list of changes between module revisions. DESCRIPTION This Perl package is intended to facilitate the testing of GUI applications by means of user emulation. It can be used to test/interact with GUI applications; which have been built upon the X library or toolkits (i.e., GTK+, Xt, Qt, Motif, etc.) that "wrap" the X library's functionality. A basic recorder (x11guirecord) is also available, and can be found in the source code repository. DEPENDENCIES An X server with the XTest extensions enabled. This seems to be the norm. If it is not enabled, it usually can be by modifying the X server configuration (i.e., XF86Config). The standard DISPLAY environment variable is utilized to determine the host, display, and screen to work with. By default it is usually set to ":0.0" for the localhost. However, by altering this variable one can interact with applications under a remote host's X server. To change this from a terminal window, one can utilize the following basic syntax: export DISPLAY=:. Please note that under most circumstances, xhost will need to be executed properly on the remote host as well. There is a known incompatibility between the XTest and Xinerama extensions, which causes the XTestFakeMotionEvent() function to misbehave. When the Xinerama (X server) extension is turned on, this (Perl) extension has been modified to allow one to invoke an alternative function. See Makefile.PL for details. INSTALLATION perl Makefile.PL make make test make install # If the build has errors, you may need to install the following dependencies: # libxt-dev, libxtst-dev # If you'd like to install the recorder, use these steps: cd recorder ./autogen.sh ./configure make make install x11guirecord --help SYNOPSIS For additional examples, please look under the 'eg/' sub-directory from the installation folder. use X11::GUITest qw/ StartApp WaitWindowViewable SendKeys /; # Start gedit application StartApp('gedit'); # Wait for application window to come up and become viewable. my ($GEditWinId) = WaitWindowViewable('gedit'); if (!$GEditWinId) { die("Couldn't find gedit window in time!"); } # Send text to it SendKeys("Hello, how are you?\n"); # Close Application (Alt-f, q). SendKeys('%(f)q'); # Handle gedit's Question window if it comes up when closing. Wait # at most 5 seconds for it. if (WaitWindowViewable('Question', undef, 5)) { # DoN't Save (Alt-n) SendKeys('%(n)'); } FUNCTIONS Parameters enclosed within [] are optional. If there are multiple optional parameters available for a function and you would like to specify the last one, for example, you can utilize undef for those parameters you don't specify. REGEX in the documentation below denotes an item that is treated as a regular expression. For example, the regex "^OK$" would look for an exact match for the word OK. FindWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] Finds the window Ids of the windows matching the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = FindWindowLike('gedit'); # Only worry about first window found my ($WindowId) = FindWindowLike('gedit'); WaitWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Waits for a window to come up that matches the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. One can optionally specify an alternative wait amount in seconds. A window will keep being looked for that matches the specified title regex until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. If a window is going to be manipulated by input, WaitWindowViewable is the more robust solution to utilize. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = WaitWindowLike('gedit'); # Only worry about first window found my ($WindowId) = WaitWindowLike('gedit'); WaitWindowLike('gedit') or die("gedit window not found!"); WaitWindowViewable TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Similar to WaitWindow, but only recognizes windows that are viewable. When GUI applications are started, their window isn't necessarily viewable yet, let alone available for input, so this function is very useful. Likewise, this function will only return an array of the matching window Ids for those windows that are viewable. An empty array is returned if no matches were found. WaitWindowClose WINDOWID [, MAXWAITINSECONDS] Waits for the specified window to close. One can optionally specify an alternative wait amount in seconds. The window will keep being checked to see if it has closed until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. zero is returned if window is not gone, non-zero if it is gone. WaitSeconds SECONDS Pauses execution for the specified amount of seconds. WaitSeconds(0.5); # Wait 1/2 second WaitSeconds(3); # Wait 3 seconds ClickWindow WINDOWID [, X Offset] [, Y Offset] [, Button] Clicks on the specified window with the mouse. Optionally one can specify the X offset and Y offset. By default, the top left corner of the window is clicked on, with these two parameters one can specify a different position to be clicked on. One can also specify an alternative button. The default button is M_LEFT, but M_MIDDLE and M_RIGHT may be specified too. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success GetWindowsFromPid Returns a list of window ids discovered for the specified process id (pid). undef is returned on error. GetWindowFromPoint X, Y [, SCREEN] Returns the window that is at the specified point. If no screen is given, it is taken from the value given when opening the X display. zero is returned if there are no matches (i.e., off screen). IsChild PARENTWINDOWID, WINDOWID Determines if the specified window is a child of the specified parent. zero is returned for false, non-zero for true. QuoteStringForSendKeys STRING Quotes {} characters in the specified string that would be interpreted as having special meaning if sent to SendKeys directly. This function would be useful if you had a text file in which you wanted to use each line of the file as input to the SendKeys function, but didn't want any special interpretation of the characters in the file. Returns the quoted string, undef is returned on error. # Quote ~, %, etc. as {~}, {%}, etc for literal use in SendKeys. SendKeys( QuoteStringForSendKeys('Hello: ~%^(){}+#') ); SendKeys( QSfSK('#+#') ); The international AltGr key - modifier character (&) is not escaped by this function. Escape this character manually ("{&}"), if used/needed. StartApp COMMANDLINE Uses the shell to execute a program. This function returns as soon as the program is called. Useful for starting GUI /applications and then going on to work with them. zero is returned on failure, non-zero for success StartApp('gedit'); RunApp COMMANDLINE Uses the shell to execute a program until its completion. Return value will be application specific, however -1 is returned to indicate a failure in starting the program. RunApp('/work/myapp'); ClickMouseButton BUTTON Clicks the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. DefaultScreen Returns the screen number specified in the X display value used to open the display. Leverages the Xlib macro of the same name. ScreenCount Returns the number of screens in the X display specified when opening it. Leverages the Xlib macro of the same name. SetEventSendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between events being sent to the X display. It is usually not a good idea to set this to 0. Please note that this delay will also affect SendKeys. Returns the old delay amount in milliseconds. GetEventSendDelay Returns the current event sending delay amount in milliseconds. SetKeySendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between keystrokes. Returns the old delay amount in milliseconds. GetKeySendDelay Returns the current keystroke sending delay amount in milliseconds. GetWindowName WINDOWID Returns the window name for the specified window Id. undef is returned if name could not be obtained. # Return the name of the window that has the input focus. my $WinName = GetWindowName(GetInputFocus()); GetWindowPid WINDOWID Returns the process id (pid) associated with the specified window. 0 is returned if the pid is not available. # Return the pid of the window that has the input focus. my $pid = GetWindowPid(GetInputFocus()); SetWindowName WINDOWID, NAME Sets the window name for the specified window Id. zero is returned on failure, non-zero for success. GetRootWindow [SCREEN] Returns the Id of the root window of the screen. This is the top/root level window that all other windows are under. If no screen is given, it is taken from the value given when opening the X display. GetChildWindows WINDOWID Returns an array of the child windows for the specified window Id. If it detects that the window hierarchy is in transition, it will wait half a second and try again. MoveMouseAbs X, Y [, SCREEN] Moves the mouse cursor to the specified absolute position in the optionally given screen. If no screen is given, it is taken from the value given when opening the X display. Zero is returned on failure, non-zero for success. GetMousePos Returns an array containing the position and the screen (number) of the mouse cursor. my ($x, $y, $scr_num) = GetMousePos(); PressMouseButton BUTTON Presses the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. ReleaseMouseButton BUTTON Releases the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. SendKeys KEYS Sends keystrokes to the window that has the input focus. The keystrokes to send are those specified in KEYS parameter. Some characters have special meaning, they are: Modifier Keys: ^ CTRL % ALT + SHIFT # META & ALTGR Other Keys: ~ ENTER \n ENTER \t TAB ( and ) MODIFIER GROUPING { and } QUOTE / ESCAPE CHARACTERS Simply, one can send a text string like so: SendKeys('Hello, how are you today?'); Parenthesis allow a modifier to work on one or more characters. For example: SendKeys('%(f)q'); # Alt-f, then press q SendKeys('%(fa)^(m)'); # Alt-f, Alt-a, Ctrl-m SendKeys('+(abc)'); # Uppercase ABC using shift modifier SendKeys('^(+(l))'); # Ctrl-Shift-l SendKeys('+'); # Press shift Braces are used to quote special characters, for utilizing aliased key names, or for special functionality. Multiple characters can be specified in a brace by space delimiting the entries. Characters can be repeated using a number that is space delimited after the preceding key. Quote Special Characters SendKeys('{{}'); # { SendKeys('{+}'); # + SendKeys('{#}'); # # You can also use QuoteStringForSendKeys (QSfSK) to perform quoting. Aliased Key Names SendKeys('{BAC}'); # Backspace SendKeys('{F1 F2 F3}'); # F1, F2, F3 SendKeys('{TAB 3}'); # Press TAB 3 times SendKeys('{SPC 3 a b c}'); # Space 3 times, a, b, c Special Functionality # Pause execution for 500 milliseconds SendKeys('{PAUSE 500}'); Combinations SendKeys('abc+(abc){TAB PAUSE 500}'); # a, b, c, A, B, C, Tab, Pause 500 SendKeys('+({a b c})'); # A, B, C The following abbreviated key names are currently recognized within a brace set. If you don't see the desired key, you can still use the unabbreviated name for the key. If you are unsure of this name, utilize the xev (X event view) tool, press the key you want and look at the tools output for the name of that key. Names that are in the list below can be utilized regardless of case. Ones that aren't in this list are going to be case sensitive and also not abbreviated. For example, using 'xev' you will find that the name of the backspace key is BackSpace, so you could use {BackSpace} in place of {bac} if you really wanted to. Name Action ------------------- BAC BackSpace BS BackSpace BKS BackSpace BRE Break CAN Cancel CAP Caps_Lock DEL Delete DOWN Down END End ENT Return ESC Escape F1 F1 ... ... F12 F12 HEL Help HOM Home INS Insert LAL Alt_L LMA Meta_L LCT Control_L LEF Left LSH Shift_L LSK Super_L MNU Menu NUM Num_Lock PGD Page_Down PGU Page_Up PRT Print RAL Alt_R RMA Meta_R RCT Control_R RIG Right RSH Shift_R RSK Super_R SCR Scroll_Lock SPA Space SPC Space TAB Tab UP Up zero is returned on failure, non-zero for success. For configurations (Xvfb) that don't support Alt_Left, Meta_Left is automatically used in its place. PressKey KEY Presses the specified key. One can utilize the abbreviated key names from the table listed above as outlined in the following example: # Alt-n PressKey('LAL'); # Left Alt PressKey('n'); ReleaseKey('n'); ReleaseKey('LAL'); # Uppercase a PressKey('LSH'); # Left Shift PressKey('a'); ReleaseKey('a'); ReleaseKey('LSH'); The ReleaseKey calls in the above example are there to set both key states back. zero is returned on failure, non-zero for success. ReleaseKey KEY Releases the specified key. Normally follows a PressKey call. One can utilize the abbreviated key names from the table listed above. ReleaseKey('n'); zero is returned on failure, non-zero for success. PressReleaseKey KEY Presses and releases the specified key. One can utilize the abbreviated key names from the table listed above. PressReleaseKey('n'); This function is affected by the key send delay. zero is returned on failure, non-zero for success. IsKeyPressed KEY Determines if the specified key is currently being pressed. You can specify such things as 'bac' or the unabbreviated form 'BackSpace' as covered in the SendKeys information. Brace forms such as '{bac}' are unsupported. A '{' is taken literally and letters are case sensitive. if (IsKeyPressed('esc')) { # Is Escape pressed? if (IsKeyPressed('a')) { # Is a pressed? if (IsKeyPressed('A')) { # Is A pressed? Returns non-zero for true, zero for false. IsMouseButtonPressed BUTTON Determines if the specified mouse button is currently being pressed. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. if (IsMouseButtonPressed(M_LEFT)) { # Is left button pressed? Returns non-zero for true, zero for false. IsWindow WINDOWID zero is returned if the specified window Id is not for something that can be recognized as a window. non-zero is returned if it looks like a window. IsWindowViewable WINDOWID zero is returned if the specified window Id is for a window that isn't viewable. non-zero is returned if the window is viewable. IsWindowCursor WINDOWID CURSOR Determines if the specified window has the specified cursor. zero is returned for false, non-zero for true. The following cursors are available through the :CONST export tag. Name ------------------- XC_NUM_GLYPHS XC_X_CURSOR XC_ARROW XC_BASED_ARROW_DOWN XC_BASED_ARROW_UP XC_BOAT XC_BOGOSITY XC_BOTTOM_LEFT_CORNER XC_BOTTOM_RIGHT_CORNER XC_BOTTOM_SIDE XC_BOTTOM_TEE XC_BOX_SPIRAL XC_CENTER_PTR XC_CIRCLE XC_CLOCK XC_COFFEE_MUG XC_CROSS XC_CROSS_REVERSE XC_CROSSHAIR XC_DIAMOND_CROSS XC_DOT XC_DOTBOX XC_DOUBLE_ARROW XC_DRAFT_LARGE XC_DRAFT_SMALL XC_DRAPED_BOX XC_EXCHANGE XC_FLEUR XC_GOBBLER XC_GUMBY XC_HAND1 XC_HAND2 XC_HEART XC_ICON XC_IRON_CROSS XC_LEFT_PTR XC_LEFT_SIDE XC_LEFT_TEE XC_LEFTBUTTON XC_LL_ANGLE XC_LR_ANGLE XC_MAN XC_MIDDLEBUTTON XC_MOUSE XC_PENCIL XC_PIRATE XC_PLUS XC_QUESTION_ARROW XC_RIGHT_PTR XC_RIGHT_SIDE XC_RIGHT_TEE XC_RIGHTBUTTON XC_RTL_LOGO XC_SAILBOAT XC_SB_DOWN_ARROW XC_SB_H_DOUBLE_ARROW XC_SB_LEFT_ARROW XC_SB_RIGHT_ARROW XC_SB_UP_ARROW XC_SB_V_DOUBLE_ARROW XC_SHUTTLE XC_SIZING XC_SPIDER XC_SPRAYCAN XC_STAR XC_TARGET XC_TCROSS XC_TOP_LEFT_ARROW XC_TOP_LEFT_CORNER XC_TOP_RIGHT_CORNER XC_TOP_SIDE XC_TOP_TEE XC_TREK XC_UL_ANGLE XC_UMBRELLA XC_UR_ANGLE XC_WATCH XC_XTERM MoveWindow WINDOWID, X, Y Moves the window to the specified location. zero is returned on failure, non-zero for success. ResizeWindow WINDOWID, WIDTH, HEIGHT Resizes the window to the specified size. zero is returned on failure, non-zero for success. IconifyWindow WINDOWID Minimizes (Iconifies) the specified window. zero is returned on failure, non-zero for success. UnIconifyWindow WINDOWID Unminimizes (UnIconifies) the specified window. zero is returned on failure, non-zero for success. RaiseWindow WINDOWID Raises the specified window to the top of the stack, so that no other windows cover it. zero is returned on failure, non-zero for success. LowerWindow WINDOWID Lowers the specified window to the bottom of the stack, so other existing windows will cover it. zero is returned on failure, non-zero for success. GetInputFocus Returns the window that currently has the input focus. SetInputFocus WINDOWID Sets the specified window to be the one that has the input focus. zero is returned on failure, non-zero for success. GetWindowPos WINDOWID Returns an array containing the position information for the specified window. It also returns size information (including border width) and the number of the screen where the window resides. my ($x, $y, $width, $height, $borderWidth, $screen) = GetWindowPos(GetRootWindow()); GetParentWindow WINDOWID Returns the parent of the specified window. zero is returned if parent couldn't be determined (i.e., root window). GetScreenDepth [SCREEN] Returns the color depth for the screen. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, -1 will be returned. Value is represented as bits, i.e. 16. my $depth = GetScreenDepth(); GetScreenRes [SCREEN] Returns the screen resolution. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, the returned list will be empty. my ($x, $y) = GetScreenRes(); OTHER DOCUMENTATION Available under the docs sub-directory. CodingStyle (Coding-Style Guidelines) Copying (Copy of the GPL License) COPYRIGHT Copyright(c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License. AUTHOR Dennis K. Paulsen (Iowa USA) CONTRIBUTORS Paulo E. Castro CREDITS Thanks to everyone; including those specifically mentioned below for patches, suggestions, etc.: David Dick Alexey Tourbin Richard Clamp Gustav Larsson Nelson D. Caro X11-GUITest-0.28/Makefile.PL0000644000000000000000000000460312311312405013741 0ustar rootroot # X11::GUITest ($Id: Makefile.PL 242 2014-03-16 12:11:48Z ctrondlp $) use strict; use warnings; use Config; use ExtUtils::MakeMaker; # Optional building of additional doc formats. if (defined($ARGV[0]) && $ARGV[0] eq 'docs') { BuildDocumentation(); } # See lib/ExtUtils/MakeMaker.pm for details of how to influence # the contents of the Makefile that is written. WriteMakefile( 'NAME' => 'X11::GUITest', ($] ge '5.005') ? ( 'AUTHOR' => 'Dennis K. Paulsen ', 'ABSTRACT' => 'Collection of functions for X11 GUI testing/interaction.', ) : (), 'VERSION_FROM' => 'GUITest.pm', # Finds $VERSION ($] lt '5.008') ? ( 'INST_MAN3DIR' => './blib/man3', 'MAN3EXT' => '3pm' ) : (), 'MAN3PODS' => {'GUITest.pm' => '$(INST_MAN3DIR)/X11::GUITest.$(MAN3EXT)'}, 'LIBS' => GetLibs(), # e.g., '-lm' # To work around an incompatibility between the XTest and the Xinerama # (X server) extensions, use "-DX11_GUITEST_USING_XINERAMA". 'DEFINE' => '-DNDEBUG -DX11_GUITEST_ALT_L_FALLBACK_META_L', # e.g., '-DHAVE_SOMETHING' 'INC' => '-I/usr/X11R6/include -I/usr/X/include', # e.g., '-I/usr/include/other' 'CCFLAGS' => $Config{ccflags} . ' -Wall', 'OBJECT' => 'GUITest$(OBJ_EXT) KeyUtil$(OBJ_EXT)', 'OPTIMIZE' => '-O2', 'META_MERGE' => { resources => { repository => 'https://x11guitest.svn.sourceforge.net/svnroot/x11guitest', }, }, 'LICENSE' => 'gpl_2', ); sub GetLibs { my $un = `uname -a 2>&1` || ""; if ($un =~ /x86_64|amd64/i && $un !~ /OpenBSD/) { # In case of x64, lets make sure we use x64 libs, system might have both. return ['-L/usr/X11R6/lib64 -L/usr/X/lib64 -lXtst -lX11']; } else { return ['-L/usr/X11R6/lib -L/usr/X/lib -lXtst -lX11']; } } # Subroutine: BuildDocumentation # Description: This function is implemented to generate the # documentation in HTML/plain-text formats. sub BuildDocumentation { my $podfile = 'GUITest.pm'; # Check POD if ( system("podchecker $podfile &>/dev/null") != 0 ) { print "POD validation failed! Documentation will not be written.\n"; return(0); } # Generate Text and HTML documents print "Writing documentation for X11::GUITest\n"; system("pod2text $podfile docs/X11-GUITest.txt"); system("pod2html --infile=$podfile --outfile=docs/X11-GUITest.html"); system("cp -f docs/X11-GUITest.txt README"); # Cleanup unlink ; unlink ; return(1); } X11-GUITest-0.28/KeyUtil.h0000644000000000000000000000216212264252262013537 0ustar rootroot/* X11::GUITest ($Id: KeyUtil.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef KEYUTIL_H #define KEYUTIL_H #include "Common.h" #include "GUITest.h" BOOL GetKeySym(const char *name, KeySym *sym); const char *GetKeyName(KeySym sym); const char *GetModifierCode(KeySym sym); typedef struct KeyNameSymTable { char *Name; KeySym Sym; } KeyNameSymTable; #endif /* #ifndef KEYUTIL_H */ X11-GUITest-0.28/recorder/0000755000000000000000000000000012311564556013611 5ustar rootrootX11-GUITest-0.28/recorder/missing0000755000000000000000000001533112311564210015176 0ustar rootroot#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2012-06-26.16; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'automa4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: X11-GUITest-0.28/recorder/configure0000755000000000000000000051546312311564207015527 0ustar rootroot#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for x11guirecord 0.28. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and ctrondlp@cpan.org $0: about your system, including any error possibly output $0: before this message. Then install a modern shell, or $0: manually run the script under such a shell if you do $0: have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='x11guirecord' PACKAGE_TARNAME='x11guirecord' PACKAGE_VERSION='0.28' PACKAGE_STRING='x11guirecord 0.28' PACKAGE_BUGREPORT='ctrondlp@cpan.org' PACKAGE_URL='' ac_unique_file="src/script_file.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS EGREP GREP CPP XMKMF am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_dependency_tracking with_x ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS XMKMF CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures x11guirecord 0.28 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/x11guirecord] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names X features: --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of x11guirecord 0.28:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-x use the X Window System Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory XMKMF Path to xmkmf, Makefile generator for X Window System CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF x11guirecord configure 0.28 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## -------------------------------- ## ## Report this to ctrondlp@cpan.org ## ## -------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by x11guirecord $as_me 0.28, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.13' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=x11guirecord VERSION=0.28 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' ac_config_headers="$ac_config_headers config.h" # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Checks for libraries. # Checks for header files. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 $as_echo_n "checking for X... " >&6; } # Check whether --with-x was given. if test "${with_x+set}" = set; then : withval=$with_x; fi # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else case $x_includes,$x_libraries in #( *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #( *,NONE | NONE,*) if ${ac_cv_have_x+:} false; then : $as_echo_n "(cached) " >&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=no ac_x_libraries=no rm -f -r conftest.dir if mkdir conftest.dir; then cd conftest.dir cat >Imakefile <<'_ACEOF' incroot: @echo incroot='${INCROOT}' usrlibdir: @echo usrlibdir='${USRLIBDIR}' libdir: @echo libdir='${LIBDIR}' _ACEOF if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. for ac_var in incroot usrlibdir libdir; do eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" done # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl dylib la dll; do if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && test -f "$ac_im_libdir/libX11.$ac_extension"; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case $ac_im_incroot in /usr/include) ac_x_includes= ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; esac case $ac_im_usrlibdir in /usr/lib | /usr/lib64 | /lib | /lib64) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; esac fi cd .. rm -f -r conftest.dir fi # Standard set of common directories for X headers. # Check X11 before X11Rn because it is often a symlink to the current release. ac_x_header_dirs=' /usr/X11/include /usr/X11R7/include /usr/X11R6/include /usr/X11R5/include /usr/X11R4/include /usr/include/X11 /usr/include/X11R7 /usr/include/X11R6 /usr/include/X11R5 /usr/include/X11R4 /usr/local/X11/include /usr/local/X11R7/include /usr/local/X11R6/include /usr/local/X11R5/include /usr/local/X11R4/include /usr/local/include/X11 /usr/local/include/X11R7 /usr/local/include/X11R6 /usr/local/include/X11R5 /usr/local/include/X11R4 /usr/X386/include /usr/x386/include /usr/XFree86/include/X11 /usr/include /usr/local/include /usr/unsupported/include /usr/athena/include /usr/local/x11r5/include /usr/lpp/Xamples/include /usr/openwin/include /usr/openwin/share/include' if test "$ac_x_includes" = no; then # Guess where to find include files, by looking for Xlib.h. # First, try using that file with no special directory specified. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # We can compile using X headers with no special include directory. ac_x_includes= else for ac_dir in $ac_x_header_dirs; do if test -r "$ac_dir/X11/Xlib.h"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest.err conftest.i conftest.$ac_ext fi # $ac_x_includes = no if test "$ac_x_libraries" = no; then # Check for the libraries. # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS=$LIBS LIBS="-lX11 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { XrmInitialize () ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : LIBS=$ac_save_LIBS # We can link X programs with no special library path. ac_x_libraries= else LIBS=$ac_save_LIBS for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` do # Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl dylib la dll; do if test -r "$ac_dir/libX11.$ac_extension"; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # $ac_x_libraries = no case $ac_x_includes,$ac_x_libraries in #( no,* | *,no | *\'*) # Didn't find X, or a directory has "'" in its name. ac_cv_have_x="have_x=no";; #( *) # Record where we found X for the cache. ac_cv_have_x="have_x=yes\ ac_x_includes='$ac_x_includes'\ ac_x_libraries='$ac_x_libraries'" esac fi ;; #( *) have_x=yes;; esac eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 $as_echo "$have_x" >&6; } no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes\ ac_x_includes='$x_includes'\ ac_x_libraries='$x_libraries'" { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 $as_echo "libraries $x_libraries, headers $x_includes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in stdlib.h string.h sys/time.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. # Checks for library functions. for ac_func in gettimeofday do : ac_fn_c_check_func "$LINENO" "gettimeofday" "ac_cv_func_gettimeofday" if test "x$ac_cv_func_gettimeofday" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_GETTIMEOFDAY 1 _ACEOF fi done ac_config_files="$ac_config_files Makefile src/Makefile man/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by x11guirecord $as_me 0.28, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ x11guirecord config.status 0.28 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi X11-GUITest-0.28/recorder/aclocal.m40000644000000000000000000011164212311564207015447 0ustar rootroot# generated automatically by aclocal 1.13.4 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.13' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.13.4], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.13.4])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR X11-GUITest-0.28/recorder/man/0000755000000000000000000000000012311564556014364 5ustar rootrootX11-GUITest-0.28/recorder/man/x11guirecord.10000644000000000000000000000207712264250157016765 0ustar rootroot.\" $Id: x11guirecord.1 215 2011-12-06 12:49:16Z ctrondlp $ .\" .TH "x11guirecord" "1" "x11guirecord 0.25" "Dennis K. Paulsen" "" .SH "NAME" x11guirecord \- Record perl scripts containing user interactions, for playback using X11::GUITest. .SH "SYNOPSIS" .B "x11guirecord" \-s \fIscript\fP [\-w \fIwait\fP] [\-e \fIexitkey\fP] [\-n \fInodelay\fP] [\-g \fIgranularity\fP] [\-? \fIhelp\fP] .SH "DESCRIPTION" .PP \fIx11guirecord\fP Record perl scripts containing user interactions, for playback using X11::GUITest. .SH "OPTIONS" .TP .B \-s \fIscript\fP Specifies the script file to record to .TP .B [\-w \fIwait\fP] Seconds to wait before recording .TP .B [\-d \fIdelaythreshold\fP] Event delay (ms) threshold to account for / record (default: 50) .TP .B [\-e \fIexitkey\fP] Exit key to stop recording (default: ESC) .TP .B [\-n \fInodelay\fP] Don't include user delays .TP .B [\-g \fIgranularity\fP] Level of granularity (mouse move frequency, default: 10 out of 1\-10) .TP .B [\-? \fIhelp\fP] Show this help message .SH "AUTHOR" Dennis K. Paulsen .br .br X11-GUITest-0.28/recorder/man/Makefile.in0000644000000000000000000003312112311564210016414 0ustar rootroot# Makefile.in generated by automake 1.13.4 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = man DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ XMKMF = @XMKMF@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ man_MANS = x11guirecord.1 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu man/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ctags-am distclean distclean-generic distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man1 install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags-am uninstall uninstall-am uninstall-man \ uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: X11-GUITest-0.28/recorder/man/Makefile.am0000644000000000000000000000003312264250157016410 0ustar rootrootman_MANS = x11guirecord.1 X11-GUITest-0.28/recorder/Makefile.in0000644000000000000000000005617412311564210015656 0ustar rootroot# Makefile.in generated by automake 1.13.4 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ XMKMF = @XMKMF@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign SUBDIRS = src man all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then rm -f stamp-h1; else :; fi @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: X11-GUITest-0.28/recorder/Makefile.am0000644000000000000000000000005612264250157015642 0ustar rootrootAUTOMAKE_OPTIONS = foreign SUBDIRS = src man X11-GUITest-0.28/recorder/autogen.sh0000755000000000000000000013443212264250157015615 0ustar rootroot#!/bin/sh # a u t o g e n . s h # # Copyright (c) 2005-2009 United States Government as represented by # the U.S. Army Research Laboratory. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following # disclaimer in the documentation and/or other materials provided # with the distribution. # # 3. The name of the author may not be used to endorse or promote # products derived from this software without specific prior written # permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ### # # Script for automatically preparing the sources for compilation by # performing the myriad of necessary steps. The script attempts to # detect proper version support, and outputs warnings about particular # systems that have autotool peculiarities. # # Basically, if everything is set up and installed correctly, the # script will validate that minimum versions of the GNU Build System # tools are installed, account for several common configuration # issues, and then simply run autoreconf for you. # # If autoreconf fails, which can happen for many valid configurations, # this script proceeds to run manual preparation steps effectively # providing a POSIX shell script (mostly complete) reimplementation of # autoreconf. # # The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER # environment variables and corresponding _OPTIONS variables (e.g. # AUTORECONF_OPTIONS) may be used to override the default automatic # detection behaviors. Similarly the _VERSION variables will override # the minimum required version numbers. # # Examples: # # To obtain help on usage: # ./autogen.sh --help # # To obtain verbose output: # ./autogen.sh --verbose # # To skip autoreconf and prepare manually: # AUTORECONF=false ./autogen.sh # # To verbosely try running with an older (unsupported) autoconf: # AUTOCONF_VERSION=2.50 ./autogen.sh --verbose # # Author: # Christopher Sean Morrison # # Patches: # Sebastian Pipping # ###################################################################### # set to minimum acceptable version of autoconf if [ "x$AUTOCONF_VERSION" = "x" ] ; then AUTOCONF_VERSION=2.52 fi # set to minimum acceptable version of automake if [ "x$AUTOMAKE_VERSION" = "x" ] ; then AUTOMAKE_VERSION=1.6.0 fi # set to minimum acceptable version of libtool if [ "x$LIBTOOL_VERSION" = "x" ] ; then LIBTOOL_VERSION=1.4.2 fi ################## # ident function # ################## ident ( ) { # extract copyright from header __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`" if [ "x$__copyright" = "x" ] ; then __copyright="`date +%Y`" fi # extract version from CVS Id string __id="$Id: autogen.sh 204 2011-05-15 02:08:31Z ctrondlp $" __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`" if [ "x$__version" = "x" ] ; then __version="" fi echo "autogen.sh build preparation script by Christopher Sean Morrison" echo " + config.guess download patch by Sebastian Pipping (2008-12-03)" echo "revised 3-clause BSD-style license, copyright (c) $__copyright" echo "script version $__version, ISO/IEC 9945 POSIX shell script" } ################## # USAGE FUNCTION # ################## usage ( ) { echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [-d|--download] [--version]" echo " --help Help on $NAME_OF_AUTOGEN usage" echo " --verbose Verbose progress output" echo " --quiet Quiet suppressed progress output" echo " --download Download the latest config.guess from gnulib" echo " --version Only perform GNU Build System version checks" echo echo "Description: This script will validate that minimum versions of the" echo "GNU Build System tools are installed and then run autoreconf for you." echo "Should autoreconf fail, manual preparation steps will be run" echo "potentially accounting for several common preparation issues. The" echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER," echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS" echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the" echo "default automatic detection behavior." echo ident return 0 } ########################## # VERSION_ERROR FUNCTION # ########################## version_error ( ) { if [ "x$1" = "x" ] ; then echo "INTERNAL ERROR: version_error was not provided a version" exit 1 fi if [ "x$2" = "x" ] ; then echo "INTERNAL ERROR: version_error was not provided an application name" exit 1 fi $ECHO $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch," $ECHO " at least version $1 of $2 must be installed." $ECHO $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will" $ECHO "run configure or make. Either the GNU Autotools will need to be installed" $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source" $ECHO "code on another system and then transferred to here. -- Cheers!" $ECHO } ########################## # VERSION_CHECK FUNCTION # ########################## version_check ( ) { if [ "x$1" = "x" ] ; then echo "INTERNAL ERROR: version_check was not provided a minimum version" exit 1 fi _min="$1" if [ "x$2" = "x" ] ; then echo "INTERNAL ERROR: version check was not provided a comparison version" exit 1 fi _cur="$2" # needed to handle versions like 1.10 and 1.4-p6 _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" _min_major="`echo $_min | cut -d. -f1`" _min_minor="`echo $_min | cut -d. -f2`" _min_patch="`echo $_min | cut -d. -f3`" _cur_major="`echo $_cur | cut -d. -f1`" _cur_minor="`echo $_cur | cut -d. -f2`" _cur_patch="`echo $_cur | cut -d. -f3`" if [ "x$_min_major" = "x" ] ; then _min_major=0 fi if [ "x$_min_minor" = "x" ] ; then _min_minor=0 fi if [ "x$_min_patch" = "x" ] ; then _min_patch=0 fi if [ "x$_cur_minor" = "x" ] ; then _cur_major=0 fi if [ "x$_cur_minor" = "x" ] ; then _cur_minor=0 fi if [ "x$_cur_patch" = "x" ] ; then _cur_patch=0 fi $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}" if [ $_min_major -lt $_cur_major ] ; then return 0 elif [ $_min_major -eq $_cur_major ] ; then if [ $_min_minor -lt $_cur_minor ] ; then return 0 elif [ $_min_minor -eq $_cur_minor ] ; then if [ $_min_patch -lt $_cur_patch ] ; then return 0 elif [ $_min_patch -eq $_cur_patch ] ; then return 0 fi fi fi return 1 } ###################################### # LOCATE_CONFIGURE_TEMPLATE FUNCTION # ###################################### locate_configure_template ( ) { _pwd="`pwd`" if test -f "./configure.ac" ; then echo "./configure.ac" elif test -f "./configure.in" ; then echo "./configure.in" elif test -f "$_pwd/configure.ac" ; then echo "$_pwd/configure.ac" elif test -f "$_pwd/configure.in" ; then echo "$_pwd/configure.in" elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then echo "$PATH_TO_AUTOGEN/configure.ac" elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then echo "$PATH_TO_AUTOGEN/configure.in" fi } ################## # argument check # ################## ARGS="$*" PATH_TO_AUTOGEN="`dirname $0`" NAME_OF_AUTOGEN="`basename $0`" AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN" LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4" if [ "x$HELP" = "x" ] ; then HELP=no fi if [ "x$QUIET" = "x" ] ; then QUIET=no fi if [ "x$VERBOSE" = "x" ] ; then VERBOSE=no fi if [ "x$VERSION_ONLY" = "x" ] ; then VERSION_ONLY=no fi if [ "x$DOWNLOAD" = "x" ] ; then DOWNLOAD=no fi if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then AUTORECONF_OPTIONS="-i -f" fi if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then AUTOCONF_OPTIONS="-f" fi if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then AUTOMAKE_OPTIONS="-a -c -f" fi ALT_AUTOMAKE_OPTIONS="-a -c" if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then LIBTOOLIZE_OPTIONS="--automake -c -f" fi ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force" if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then ACLOCAL_OPTIONS="" fi if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then AUTOHEADER_OPTIONS="" fi if [ "x$CONFIG_GUESS_URL" = "x" ] ; then CONFIG_GUESS_URL="http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=build-aux/config.guess;hb=HEAD" fi for arg in $ARGS ; do case "x$arg" in x--help) HELP=yes ;; x-[hH]) HELP=yes ;; x--quiet) QUIET=yes ;; x-[qQ]) QUIET=yes ;; x--verbose) VERBOSE=yes ;; x-[dD]) DOWNLOAD=yes ;; x--download) DOWNLOAD=yes ;; x-[vV]) VERBOSE=yes ;; x--version) VERSION_ONLY=yes ;; *) echo "Unknown option: $arg" echo usage exit 1 ;; esac done ##################### # environment check # ##################### # sanity check before recursions potentially begin if [ ! -f "$AUTOGEN_SH" ] ; then echo "INTERNAL ERROR: $AUTOGEN_SH does not exist" if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH" fi exit 1 fi # force locale setting to C so things like date output as expected LC_ALL=C # commands that this script expects for __cmd in echo head tail pwd ; do echo "test" | $__cmd > /dev/null 2>&1 if [ $? != 0 ] ; then echo "INTERNAL ERROR: '${__cmd}' command is required" exit 2 fi done echo "test" | grep "test" > /dev/null 2>&1 if test ! x$? = x0 ; then echo "INTERNAL ERROR: grep command is required" exit 1 fi echo "test" | sed "s/test/test/" > /dev/null 2>&1 if test ! x$? = x0 ; then echo "INTERNAL ERROR: sed command is required" exit 1 fi # determine the behavior of echo case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac # determine the behavior of head case "x`echo 'head' | head -n 1 2>&1`" in *xhead*) HEAD_N="n " ;; *) HEAD_N="" ;; esac # determine the behavior of tail case "x`echo 'tail' | tail -n 1 2>&1`" in *xtail*) TAIL_N="n " ;; *) TAIL_N="" ;; esac VERBOSE_ECHO=: ECHO=: if [ "x$QUIET" = "xyes" ] ; then if [ "x$VERBOSE" = "xyes" ] ; then echo "Verbose output quelled by quiet option. Further output disabled." fi else ECHO=echo if [ "x$VERBOSE" = "xyes" ] ; then echo "Verbose output enabled" VERBOSE_ECHO=echo fi fi # allow a recursive run to disable further recursions if [ "x$RUN_RECURSIVE" = "x" ] ; then RUN_RECURSIVE=yes fi ################################################ # check for help arg and bypass version checks # ################################################ if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then HELP=yes fi if [ "x$HELP" = "xyes" ] ; then usage $ECHO "---" $ECHO "Help was requested. No preparation or configuration will be performed." exit 0 fi ####################### # set up signal traps # ####################### untrap_abnormal ( ) { for sig in 1 2 13 15; do trap - $sig done } # do this cleanup whenever we exit. trap ' # start from the root if test -d "$START_PATH" ; then cd "$START_PATH" fi # restore/delete backup files if test "x$PFC_INIT" = "x1" ; then recursive_restore fi ' 0 # trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15) for sig in 1 2 13 15; do trap ' $ECHO "" $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'" # start from the root if test -d "$START_PATH" ; then cd "$START_PATH" fi # clean up on abnormal exit $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache if test -f "acinclude.m4.$$.backup" ; then $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4" chmod u+w acinclude.m4 cat acinclude.m4.$$.backup > acinclude.m4 $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup" rm -f acinclude.m4.$$.backup fi { (exit 1); exit 1; } ' $sig done ############################# # look for a configure file # ############################# if [ "x$CONFIGURE" = "x" ] ; then CONFIGURE="`locate_configure_template`" if [ ! "x$CONFIGURE" = "x" ] ; then $VERBOSE_ECHO "Found a configure template: $CONFIGURE" fi else $ECHO "Using CONFIGURE environment variable override: $CONFIGURE" fi if [ "x$CONFIGURE" = "x" ] ; then if [ "x$VERSION_ONLY" = "xyes" ] ; then CONFIGURE=/dev/null else $ECHO $ECHO "A configure.ac or configure.in file could not be located implying" $ECHO "that the GNU Build System is at least not used in this directory. In" $ECHO "any case, there is nothing to do here without one of those files." $ECHO $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" exit 1 fi fi #################### # get project name # #################### if [ "x$PROJECT" = "x" ] ; then PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if [ "x$PROJECT" = "xAC_INIT" ] ; then # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" fi if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then PROJECT="project" fi if [ "x$PROJECT" = "x" ] ; then PROJECT="project" fi else $ECHO "Using PROJECT environment variable override: $PROJECT" fi $ECHO "Preparing the $PROJECT build system...please wait" $ECHO ######################## # check for autoreconf # ######################## HAVE_AUTORECONF=no if [ "x$AUTORECONF" = "x" ] ; then for AUTORECONF in autoreconf ; do $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version" $AUTORECONF --version > /dev/null 2>&1 if [ $? = 0 ] ; then HAVE_AUTORECONF=yes break fi done else HAVE_AUTORECONF=yes $ECHO "Using AUTORECONF environment variable override: $AUTORECONF" fi ########################## # autoconf version check # ########################## _acfound=no if [ "x$AUTOCONF" = "x" ] ; then for AUTOCONF in autoconf ; do $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version" $AUTOCONF --version > /dev/null 2>&1 if [ $? = 0 ] ; then _acfound=yes break fi done else _acfound=yes $ECHO "Using AUTOCONF environment variable override: $AUTOCONF" fi _report_error=no if [ ! "x$_acfound" = "xyes" ] ; then $ECHO "ERROR: Unable to locate GNU Autoconf." _report_error=yes else _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Autoconf version $_version" version_check "$AUTOCONF_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$AUTOCONF_VERSION" "GNU Autoconf" exit 1 fi ########################## # automake version check # ########################## _amfound=no if [ "x$AUTOMAKE" = "x" ] ; then for AUTOMAKE in automake ; do $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version" $AUTOMAKE --version > /dev/null 2>&1 if [ $? = 0 ] ; then _amfound=yes break fi done else _amfound=yes $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE" fi _report_error=no if [ ! "x$_amfound" = "xyes" ] ; then $ECHO $ECHO "ERROR: Unable to locate GNU Automake." _report_error=yes else _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Automake version $_version" version_check "$AUTOMAKE_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$AUTOMAKE_VERSION" "GNU Automake" exit 1 fi ######################## # check for libtoolize # ######################## HAVE_LIBTOOLIZE=yes HAVE_ALT_LIBTOOLIZE=no _ltfound=no if [ "x$LIBTOOLIZE" = "x" ] ; then LIBTOOLIZE=libtoolize $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version" $LIBTOOLIZE --version > /dev/null 2>&1 if [ ! $? = 0 ] ; then HAVE_LIBTOOLIZE=no $ECHO if [ "x$HAVE_AUTORECONF" = "xno" ] ; then $ECHO "Warning: libtoolize does not appear to be available." else $ECHO "Warning: libtoolize does not appear to be available. This means that" $ECHO "the automatic build preparation via autoreconf will probably not work." $ECHO "Preparing the build by running each step individually, however, should" $ECHO "work and will be done automatically for you if autoreconf fails." fi # look for some alternates for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version" _glibtoolize="`$tool --version > /dev/null 2>&1`" if [ $? = 0 ] ; then $VERBOSE_ECHO "Found $tool --version" _glti="`which $tool`" if [ "x$_glti" = "x" ] ; then $VERBOSE_ECHO "Cannot find $tool with which" continue; fi if test ! -f "$_glti" ; then $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file" continue; fi _gltidir="`dirname $_glti`" if [ "x$_gltidir" = "x" ] ; then $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti" continue; fi if test ! -d "$_gltidir" ; then $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory" continue; fi HAVE_ALT_LIBTOOLIZE=yes LIBTOOLIZE="$tool" $ECHO $ECHO "Fortunately, $tool was found which means that your system may simply" $ECHO "have a non-standard or incomplete GNU Autotools install. If you have" $ECHO "sufficient system access, it may be possible to quell this warning by" $ECHO "running:" $ECHO sudo -V > /dev/null 2>&1 if [ $? = 0 ] ; then $ECHO " sudo ln -s $_glti $_gltidir/libtoolize" $ECHO else $ECHO " ln -s $_glti $_gltidir/libtoolize" $ECHO $ECHO "Run that as root or with proper permissions to the $_gltidir directory" $ECHO fi _ltfound=yes break fi done else _ltfound=yes fi else _ltfound=yes $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE" fi ############################ # libtoolize version check # ############################ _report_error=no if [ ! "x$_ltfound" = "xyes" ] ; then $ECHO $ECHO "ERROR: Unable to locate GNU Libtool." _report_error=yes else _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Libtool version $_version" version_check "$LIBTOOL_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$LIBTOOL_VERSION" "GNU Libtool" exit 1 fi ##################### # check for aclocal # ##################### if [ "x$ACLOCAL" = "x" ] ; then for ACLOCAL in aclocal ; do $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version" $ACLOCAL --version > /dev/null 2>&1 if [ $? = 0 ] ; then break fi done else $ECHO "Using ACLOCAL environment variable override: $ACLOCAL" fi ######################## # check for autoheader # ######################## if [ "x$AUTOHEADER" = "x" ] ; then for AUTOHEADER in autoheader ; do $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version" $AUTOHEADER --version > /dev/null 2>&1 if [ $? = 0 ] ; then break fi done else $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER" fi ######################### # check if version only # ######################### $VERBOSE_ECHO "Checking whether to only output version information" if [ "x$VERSION_ONLY" = "xyes" ] ; then $ECHO ident $ECHO "---" $ECHO "Version requested. No preparation or configuration will be performed." exit 0 fi ################################# # PROTECT_FROM_CLOBBER FUNCTION # ################################# protect_from_clobber ( ) { PFC_INIT=1 # protect COPYING & INSTALL from overwrite by automake. the # automake force option will (inappropriately) ignore the existing # contents of a COPYING and/or INSTALL files (depending on the # version) instead of just forcing *missing* files like it does # for AUTHORS, NEWS, and README. this is broken but extremely # prevalent behavior, so we protect against it by keeping a backup # of the file that can later be restored. for file in COPYING INSTALL ; do if test -f ${file} ; then if test -f ${file}.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "Already backed up ${file} in `pwd`" else $VERBOSE_ECHO "Backing up ${file} in `pwd`" $VERBOSE_ECHO "cp -p ${file} ${file}.$$.protect_from_automake.backup" cp -p ${file} ${file}.$$.protect_from_automake.backup fi fi done } ############################## # RECURSIVE_PROTECT FUNCTION # ############################## recursive_protect ( ) { # for projects using recursive configure, run the build # preparation steps for the subdirectories. this function assumes # START_PATH was set to pwd before recursion begins so that # relative paths work. # git 'r done, protect COPYING and INSTALL from being clobbered protect_from_clobber if test -d autom4te.cache ; then $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache fi # find configure template _configure="`locate_configure_template`" if [ "x$_configure" = "x" ] ; then return fi # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure" # look for subdirs # $VERBOSE_ECHO "Looking for subdirs in `pwd`" _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" CHECK_DIRS="" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" fi done # process subdirs if [ ! "x$CHECK_DIRS" = "x" ] ; then $VERBOSE_ECHO "Recursively scanning the following directories:" $VERBOSE_ECHO " $CHECK_DIRS" for dir in $CHECK_DIRS ; do $VERBOSE_ECHO "Protecting files from automake in $dir" cd "$START_PATH" eval "cd $dir" # recursively git 'r done recursive_protect done fi } # end of recursive_protect ############################# # RESTORE_CLOBBERED FUNCION # ############################# restore_clobbered ( ) { # The automake (and autoreconf by extension) -f/--force-missing # option may overwrite COPYING and INSTALL even if they do exist. # Here we restore the files if necessary. spacer=no for file in COPYING INSTALL ; do if test -f ${file}.$$.protect_from_automake.backup ; then if test -f ${file} ; then # compare entire content, restore if needed if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then if test "x$spacer" = "xno" ; then $VERBOSE_ECHO spacer=yes fi # restore the backup $VERBOSE_ECHO "Restoring ${file} from backup (automake -f likely clobbered it)" $VERBOSE_ECHO "rm -f ${file}" rm -f ${file} $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" mv ${file}.$$.protect_from_automake.backup ${file} fi # check contents elif test -f ${file}.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" mv ${file}.$$.protect_from_automake.backup ${file} fi # -f ${file} # just in case $VERBOSE_ECHO "rm -f ${file}.$$.protect_from_automake.backup" rm -f ${file}.$$.protect_from_automake.backup fi # -f ${file}.$$.protect_from_automake.backup done CONFIGURE="`locate_configure_template`" if [ "x$CONFIGURE" = "x" ] ; then return fi _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if test ! -d "$_aux_dir" ; then _aux_dir=. fi for file in config.guess config.sub ltmain.sh ; do if test -f "${_aux_dir}/${file}" ; then $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\"" rm -f "${_aux_dir}/${file}.backup" fi done } # end of restore_clobbered ############################## # RECURSIVE_RESTORE FUNCTION # ############################## recursive_restore ( ) { # restore COPYING and INSTALL from backup if they were clobbered # for each directory recursively. # git 'r undone restore_clobbered # find configure template _configure="`locate_configure_template`" if [ "x$_configure" = "x" ] ; then return fi # look for subdirs _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" CHECK_DIRS="" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" fi done # process subdirs if [ ! "x$CHECK_DIRS" = "x" ] ; then $VERBOSE_ECHO "Recursively scanning the following directories:" $VERBOSE_ECHO " $CHECK_DIRS" for dir in $CHECK_DIRS ; do $VERBOSE_ECHO "Checking files for automake damage in $dir" cd "$START_PATH" eval "cd $dir" # recursively git 'r undone recursive_restore done fi } # end of recursive_restore ####################### # INITIALIZE FUNCTION # ####################### initialize ( ) { # this routine performs a variety of directory-specific # initializations. some are sanity checks, some are preventive, # and some are necessary setup detection. # # this function sets: # CONFIGURE # SEARCH_DIRS # CONFIG_SUBDIRS ################################## # check for a configure template # ################################## CONFIGURE="`locate_configure_template`" if [ "x$CONFIGURE" = "x" ] ; then $ECHO $ECHO "A configure.ac or configure.in file could not be located implying" $ECHO "that the GNU Build System is at least not used in this directory. In" $ECHO "any case, there is nothing to do here without one of those files." $ECHO $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" exit 1 fi ##################### # detect an aux dir # ##################### _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if test ! -d "$_aux_dir" ; then _aux_dir=. else $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir" fi ################################ # detect a recursive configure # ################################ CONFIG_SUBDIRS="" _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir" CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir" fi done ########################################################### # make sure certain required files exist for GNU projects # ########################################################### _marker_found="" _marker_found_message_intro='Detected non-GNU marker "' _marker_found_message_mid='" in ' for marker in foreign cygnus ; do _marker_found_message=${_marker_found_message_intro}${marker}${_marker_found_message_mid} _marker_found="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`" if [ ! "x$_marker_found" = "x" ] ; then $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`" break fi if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then _marker_found="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`" if [ ! "x$_marker_found" = "x" ] ; then $VERBOSE_ECHO "${_marker_found_message}Makefile.am" break fi fi done if [ "x${_marker_found}" = "x" ] ; then _suggest_foreign=no for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do if [ ! -f $file ] ; then $VERBOSE_ECHO "Touching ${file} since it does not exist" _suggest_foreign=yes touch $file fi done if [ "x${_suggest_foreign}" = "xyes" ] ; then $ECHO $ECHO "Warning: Several files expected of projects that conform to the GNU" $ECHO "coding standards were not found. The files were automatically added" $ECHO "for you since you do not have a 'foreign' declaration specified." $ECHO $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`" if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file." fi $ECHO fi fi ################################################## # make sure certain generated files do not exist # ################################################## for file in config.guess config.sub ltmain.sh ; do if test -f "${_aux_dir}/${file}" ; then $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\"" mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup" fi done ############################ # search alternate m4 dirs # ############################ SEARCH_DIRS="" for dir in m4 ; do if [ -d $dir ] ; then $VERBOSE_ECHO "Found extra aclocal search directory: $dir" SEARCH_DIRS="$SEARCH_DIRS -I $dir" fi done ###################################### # remove any previous build products # ###################################### if test -d autom4te.cache ; then $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache fi # tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it # if test -f aclocal.m4 ; then # $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it" # $VERBOSE_ECHO "rm -f aclocal.m4" # rm -f aclocal.m4 # fi } # end of initialize() ############## # initialize # ############## # stash path START_PATH="`pwd`" # Before running autoreconf or manual steps, some prep detection work # is necessary or useful. Only needs to occur once per directory, but # does need to traverse the entire subconfigure hierarchy to protect # files from being clobbered even by autoreconf. recursive_protect # start from where we started cd "$START_PATH" # get ready to process initialize ######################################### # DOWNLOAD_GNULIB_CONFIG_GUESS FUNCTION # ######################################### # TODO - should make sure wget/curl exist and/or work before trying to # use them. download_gnulib_config_guess () { # abuse gitweb to download gnulib's latest config.guess via HTTP config_guess_temp="config.guess.$$.download" ret=1 for __cmd in wget curl fetch ; do $VERBOSE_ECHO "Checking for command ${__cmd}" ${__cmd} --version > /dev/null 2>&1 ret=$? if [ ! $ret = 0 ] ; then continue fi __cmd_version=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'` $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}" opts="" case ${__cmd} in wget) opts="-O" ;; curl) opts="-o" ;; fetch) opts="-t 5 -f" ;; esac $VERBOSE_ECHO "Running $__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" eval "$__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" > /dev/null 2>&1 if [ $? = 0 ] ; then mv -f "${config_guess_temp}" ${_aux_dir}/config.guess ret=0 break fi done if [ ! $ret = 0 ] ; then $ECHO "Warning: config.guess download failed from: $CONFIG_GUESS_URL" rm -f "${config_guess_temp}" fi } ############################## # LIBTOOLIZE_NEEDED FUNCTION # ############################## libtoolize_needed () { ret=1 # means no, don't need libtoolize for feature in AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT ; do $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" found="`grep \"^$feature.*\" $CONFIGURE`" if [ ! "x$found" = "x" ] ; then ret=0 # means yes, need to run libtoolize break fi done return ${ret} } ############################################ # prepare build via autoreconf or manually # ############################################ reconfigure_manually=no if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then $ECHO $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C" $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS" autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$autoreconf_output" if [ ! $ret = 0 ] ; then if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then $ECHO $ECHO "Warning: autoreconf failed but due to what is usually a common libtool" $ECHO "misconfiguration issue. This problem is encountered on systems that" $ECHO "have installed libtoolize under a different name without providing a" $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable." $ECHO $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE" export LIBTOOLIZE RUN_RECURSIVE=no export RUN_RECURSIVE untrap_abnormal $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" exit $? fi fi $ECHO "Warning: $AUTORECONF failed" if test -f ltmain.sh ; then $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should" fi $ECHO "Attempting to run the preparation steps individually" reconfigure_manually=yes else if [ "x$DOWNLOAD" = "xyes" ] ; then if libtoolize_needed ; then download_gnulib_config_guess fi fi fi else reconfigure_manually=yes fi ############################ # LIBTOOL_FAILURE FUNCTION # ############################ libtool_failure ( ) { # libtool is rather error-prone in comparison to the other # autotools and this routine attempts to compensate for some # common failures. the output after a libtoolize failure is # parsed for an error related to AC_PROG_LIBTOOL and if found, we # attempt to inject a project-provided libtool.m4 file. _autoconf_output="$1" if [ "x$RUN_RECURSIVE" = "xno" ] ; then # we already tried the libtool.m4, don't try again return 1 fi if test -f "$LIBTOOL_M4" ; then found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`" if test ! "x$found_libtool" = "x" ; then if test -f acinclude.m4 ; then rm -f acinclude.m4.$$.backup $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup" cat acinclude.m4 > acinclude.m4.$$.backup fi $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4" chmod u+w acinclude.m4 cat "$LIBTOOL_M4" >> acinclude.m4 # don't keep doing this RUN_RECURSIVE=no export RUN_RECURSIVE untrap_abnormal $ECHO $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4" $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" exit $? fi fi } ########################### # MANUAL_AUTOGEN FUNCTION # ########################### manual_autogen ( ) { ################################################## # Manual preparation steps taken are as follows: # # aclocal [-I m4] # # libtoolize --automake -c -f # # aclocal [-I m4] # # autoconf -f # # autoheader # # automake -a -c -f # ################################################## ########### # aclocal # ########### $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$aclocal_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi ############## # libtoolize # ############## if libtoolize_needed ; then if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS" libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$libtoolize_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi else if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS" libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$libtoolize_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi fi fi ########### # aclocal # ########### # re-run again as instructed by libtoolize $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$aclocal_output" # libtoolize might put ltmain.sh in the wrong place if test -f ltmain.sh ; then if test ! -f "${_aux_dir}/ltmain.sh" ; then $ECHO $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory" $ECHO $ECHO "Fortunately, the problem can be worked around by simply copying the" $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you." $ECHO $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\"" cp -p ltmain.sh "${_aux_dir}/ltmain.sh" $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C" fi fi # ltmain.sh if [ "x$DOWNLOAD" = "xyes" ] ; then download_gnulib_config_guess fi fi # libtoolize_needed ############ # autoconf # ############ $VERBOSE_ECHO $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS" autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$autoconf_output" if [ ! $ret = 0 ] ; then # retry without the -f and check for usage of macros that are too new ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE" ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE" ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T" macros_to_search="" ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`" ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`" if [ $ac_major -lt 2 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" else if [ $ac_minor -lt 54 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" elif [ $ac_minor -lt 55 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros" elif [ $ac_minor -lt 59 ] ; then macros_to_search="$ac2_59_macros" fi fi configure_ac_macros=__none__ for feature in $macros_to_search ; do $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" found="`grep \"^$feature.*\" $CONFIGURE`" if [ ! "x$found" = "x" ] ; then if [ "x$configure_ac_macros" = "x__none__" ] ; then configure_ac_macros="$feature" else configure_ac_macros="$feature $configure_ac_macros" fi fi done if [ ! "x$configure_ac_macros" = "x__none__" ] ; then $ECHO $ECHO "Warning: Unsupported macros were found in $CONFIGURE" $ECHO $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any" $ECHO "unsupported macros are used that exceed the minimum version" $ECHO "settings specified within this file. As such, the following macros" $ECHO "should be removed from configure.ac or the version numbers in this" $ECHO "file should be increased:" $ECHO $ECHO "$configure_ac_macros" $ECHO $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C" fi ################### # autoconf, retry # ################### $VERBOSE_ECHO $VERBOSE_ECHO "$AUTOCONF" autoconf_output="`$AUTOCONF 2>&1`" ret=$? $VERBOSE_ECHO "$autoconf_output" if [ ! $ret = 0 ] ; then # test if libtool is busted libtool_failure "$autoconf_output" # let the user know what went wrong cat < header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION X11-GUITest-0.28/recorder/install-sh0000755000000000000000000003325512311564210015610 0ustar rootroot#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: X11-GUITest-0.28/recorder/src/0000755000000000000000000000000012311564556014400 5ustar rootrootX11-GUITest-0.28/recorder/src/record.c0000644000000000000000000001164412264252262016023 0ustar rootroot/* X11::GUITest ($Id: record.c 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "record_event.h" #include "record.h" #include "Common.h" static BOOL shouldExit = FALSE; static struct timeval lastTime = {0}; static struct timeval currentTime = {0}; static void (*HandleEvent)(struct record_event ev); static XRecordContext rcon; static Display *otherDisp = NULL; static Display *disp = NULL; int RecordEvents(void (*handleEvent)(struct record_event ev)) { XRecordClientSpec rcspec = {0}; XRecordRange *xrr = NULL; int major = 0, minor = 0; HandleEvent = handleEvent; // Register it signal(SIGINT, sigint_handler); SetLastTime(); disp = XOpenDisplay(NULL); if (disp == NULL) { fprintf(stderr, _("Unable to open display connection.\n")); return 1; } XSynchronize(disp, False); // Ensure extension available if (!XRecordQueryVersion(disp, &major, &minor)) { fprintf(stderr, _("The record extension is unavailable.\n")); return 1; } xrr = XRecordAllocRange(); if (xrr == NULL) { fprintf(stderr, _("Range allocation failed.\n")); return 1; } xrr->device_events.first = KeyPress; xrr->device_events.last = MotionNotify; rcspec = XRecordAllClients; rcon = XRecordCreateContext(disp, 0, &rcspec, 1, &xrr, 1); if (!rcon) { fprintf(stderr, _("Unable to create context.\n")); return 1; } otherDisp = XOpenDisplay(NULL); if (otherDisp == NULL) { fprintf(stderr, _("Unable to open other display connection.\n")); return 1; } // Clean out X events in progress XFlush(disp); XFlush(otherDisp); // Record... if (!XRecordEnableContext(otherDisp, rcon, EventCallback, (XPointer)disp)) { fprintf(stderr, _("Enable context failed\n")); return 1; } // ...until StopRecording() is called. XFree(xrr); return 0; } void StopRecording(void) { shouldExit = TRUE; XRecordDisableContext(disp, rcon); XRecordFreeContext(disp, rcon); //XCloseDisplay(otherDisp); // Note: N/A, blocks indefinitely XCloseDisplay(disp); } void SetLastTime(void) { if (gettimeofday(&lastTime, NULL) != 0) { fprintf(stderr, _("unable to get time\n")); } } void SetCurrentTime(void) { if (gettimeofday(¤tTime, NULL) != 0) { fprintf(stderr, _("unable to get time\n")); } } long GetDelay(void) { long secDiff = 0; long usecDiff = 0; long final = 0; SetCurrentTime(); /* Get delay between the previous event and this one */ secDiff = (currentTime.tv_sec - lastTime.tv_sec); usecDiff = ((currentTime.tv_usec - lastTime.tv_usec) / 1000); final = ((secDiff * 1000) + usecDiff); SetLastTime(); return final; } void EventCallback(XPointer p, XRecordInterceptData *idata) { if (shouldExit) { return; } if (XRecordFromServer == idata->category) { Display *disp = (Display *)p; xEvent *xev = (xEvent *)idata->data; int type = xev->u.u.type; int keyPress = 0; struct record_event re = {0}; re.delay = GetDelay(); re.type = NOTYPE; re.state = NOSTATE; re.dataname = NULL; re.data = 0; switch (type) { case ButtonPress: re.type = MOUSEBUTTON; re.state = DOWN; re.data = xev->u.u.detail; break; case ButtonRelease: re.type = MOUSEBUTTON; re.state = UP; re.data = xev->u.u.detail; break; case KeyPress: keyPress = 1; case KeyRelease: { //printf("key code: %d\n", xev->u.u.detail); KeyCode kc = xev->u.u.detail; KeySym ks = XkbKeycodeToKeysym(disp, kc, 0, 0); re.dataname = XKeysymToString(ks); re.data = ks; re.type = KEY; re.state = (keyPress == 1) ? DOWN : UP; } break; case MotionNotify: { re.type = MOUSEMOVE; re.posX = xev->u.keyButtonPointer.rootX; re.posY = xev->u.keyButtonPointer.rootY; } break; case EnterNotify: case LeaveNotify: default: break; } //// HandleEvent(re); //// } if (idata != NULL) { XRecordFreeData(idata); } } void sigint_handler(int sig) { StopRecording(); } X11-GUITest-0.28/recorder/src/main.h0000644000000000000000000000312412264252262015470 0ustar rootroot/* X11::GUITest ($Id: main.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef MAIN_H #define MAIN_H #define APP_NAME "x11guirecord" #define DEFAULT_WAIT_SECS 1 #define DEFAULT_DELAY_MS 50 #define MIN_DELAY_MS 0 #define MAX_DELAY_MS 1000 #define MAX_KEY_NAME 35 #define MAX_KEYDELAY_BEFOREFLUSH_MS 1000 #define MOUSE_DBLCLICK_THRESHOLD 300 #define MAX_MBUTTON_NAME 25 #define MAX_KEY_BUFFER 128 #define KEY_BUFFER_THRESHOLD 60 #define MIN_WAIT_SECONDS 1 #define MAX_WAIT_SECONDS 240 #define MIN_GRANULARITY 1 #define MAX_GRANULARITY 10 static void PrintAppInfo(void); static BOOL GetMouseButtonFromIndex(int index, char *button); static void HandleDelay(unsigned long delay); static void HandleKeyBuffer(BOOL forceKeyFlush); static void ProcessEvent(struct record_event ev); static BOOL IsMouseMoveTooGranular(struct record_event ev); #endif /* #ifndef MAIN_H */ X11-GUITest-0.28/recorder/src/script_file.h0000644000000000000000000000201712264252262017047 0ustar rootroot/* X11::GUITest ($Id: script_file.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef SCRIPT_FILE_H #define SCRIPT_FILE_H #define MAX_SCRIPT_BUFFER 2048 BOOL OpenScript(char *scriptFile); void WriteScript(char *format, ...); void CloseScript(void); #endif /* #ifndef SCRIPT_FILE_H */ X11-GUITest-0.28/recorder/src/record_event.h0000644000000000000000000000221212264252262017220 0ustar rootroot/* X11::GUITest ($Id: record_event.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef RECORD_EVENT_H #define RECORD_EVENT_H typedef enum {NOTYPE, MOUSEBUTTON, KEY, MOUSEMOVE} EventType; typedef enum {NOSTATE, UP, DOWN } EventState; struct record_event { EventType type; EventState state; unsigned long delay; const char *dataname; int data; int posX; int posY; }; #endif /* #ifndef RECORD_EVENT_H */ X11-GUITest-0.28/recorder/src/main.c0000644000000000000000000001634112264252262015470 0ustar rootroot/* X11::GUITest ($Id: main.c 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #include #include #include #include #include #include #include #include #include "record.h" #include "record_event.h" #include "KeyUtil.h" #include "script_file.h" #include "Common.h" #include "main.h" static char *scriptFile = NULL; static char *exitKey = "ESC"; static KeySym exitKeySym = 0; static BOOL excludeDelays = FALSE; static int waitSeconds = DEFAULT_WAIT_SECS; static int delayThresholdMs = DEFAULT_DELAY_MS; static int granularity = MAX_GRANULARITY; static struct record_event lastEvent = {0}; static char buttonName[MAX_MBUTTON_NAME] = "\0"; static char keyBuffer[MAX_KEY_BUFFER] = "\0"; int main (int argc, char *argv[]) { poptContext optCon = {0}; // International support setlocale(LC_MESSAGES, ""); bindtextdomain(APP_NAME, APP_TEXTDOMAIN); textdomain(APP_NAME); // Parse arguments struct poptOption optTbl[] = { {"script", 's', POPT_ARG_STRING, &scriptFile, 0, _("Script file to create"), NULL}, {"wait", 'w', POPT_ARG_INT | POPT_ARGFLAG_SHOW_DEFAULT, &waitSeconds, 0, _("Seconds to wait before recording"), NULL}, {"delaythreshold", 'd', POPT_ARG_INT | POPT_ARGFLAG_SHOW_DEFAULT, &delayThresholdMs, 0, _("Event delay (ms) threshold to account for / record"), NULL}, {"exitkey", 'e', POPT_ARG_STRING | POPT_ARGFLAG_SHOW_DEFAULT, &exitKey, 0, _("Exit key to stop recording"), NULL}, {"nodelay", 'n', POPT_ARG_NONE, &excludeDelays, 0, _("Don't include user delays"), NULL}, {"granularity", 'g', POPT_ARG_INT | POPT_ARGFLAG_SHOW_DEFAULT, &granularity, 0, _("Level of granularity, mouse move frequency, 1-10"), NULL}, POPT_AUTOHELP POPT_TABLEEND }; optCon = poptGetContext(NULL, argc, (const char **)argv, optTbl, 0); if (argc <= 1) { PrintAppInfo(); poptPrintHelp(optCon, stderr, 0); exit(1); } while (poptGetNextOpt(optCon) >= 0) {} poptFreeContext(optCon); // Check arguments if (scriptFile == NULL || !*scriptFile) { fprintf(stderr, _("No script file specified.\n")); exit(1); } if (!GetKeySym(exitKey, &exitKeySym)) { fprintf(stderr, _("Invalid exit key defined.\n")); exit(1); } if (waitSeconds < MIN_WAIT_SECONDS || waitSeconds > MAX_WAIT_SECONDS) { fprintf(stderr, _("Invalid wait defined (supplied %d, but needs 1-%d).\n"), waitSeconds, MAX_WAIT_SECONDS); exit(1); } if (granularity < MIN_GRANULARITY || granularity > MAX_GRANULARITY) { fprintf(stderr, _("Invalid granularity defined (supplied %d, but needs %d-%d).\n"), granularity, MIN_GRANULARITY, MAX_GRANULARITY); exit(1); } if (delayThresholdMs < MIN_DELAY_MS || delayThresholdMs > MAX_DELAY_MS) { fprintf(stderr, _("Invalid delay theshold defined (supplied %d, but needs %d-%d).\n"), delayThresholdMs, MIN_DELAY_MS, MAX_DELAY_MS); exit(1); } if (!OpenScript(scriptFile)) { exit(1); } // Starting up... usleep(waitSeconds * 1000000); printf(_("Recording Started, press %s to exit.\n"), exitKey); WriteScript("#!/usr/bin/perl\n\n"); WriteScript("use X11::GUITest qw/:ALL/;\n"); WriteScript("use strict;\n"); WriteScript("use warnings;\n\n\n"); WriteScript(_("# Begin (Recorder Version %s).\n"), APP_VERSION); //// RecordEvents(ProcessEvent); //// WriteScript(_("\n\n# End.\n")); CloseScript(); printf(_("\nRecording Finished.\n")); exit(0); } static void PrintAppInfo(void) { printf("%s (%s: %s)\n\n", APP_NAME, _("Version"), APP_VERSION); } static BOOL GetMouseButtonFromIndex(int index, char *button) { if (button == NULL) { return FALSE; } *button = NUL; if (index == 1) { strcpy(button, "M_LEFT"); } else if (index == 2) { strcpy(button, "M_MIDDLE"); } else if (index == 3) { strcpy(button, "M_RIGHT"); } else if (index == 4) { strcpy(button, "M_UP"); } else if (index == 5) { strcpy(button, "M_DOWN"); } else { return FALSE; } return TRUE; } static void HandleDelay(unsigned long delay) { if (excludeDelays == FALSE) { if (delay > delayThresholdMs) { float secs = ((float)delay / 1000); // ms to secs WriteScript("WaitSeconds(%0.3f);\n", secs); } } } static void HandleKeyBuffer(BOOL forceKeyFlush) { int len = strlen(keyBuffer); if (forceKeyFlush || len >= KEY_BUFFER_THRESHOLD) { if (len > 0) { WriteScript("SendKeys('%s');\n", keyBuffer); *keyBuffer = '\0'; // clear } } } static void ProcessEvent(struct record_event ev) { if (ev.type == KEY) { // TODO: Granular delay between buffered key events BOOL forceKeyFlush = (ev.delay > MAX_KEYDELAY_BEFOREFLUSH_MS); HandleKeyBuffer(forceKeyFlush); HandleDelay(ev.delay); // Are we exiting? if (ev.data == exitKeySym) { HandleKeyBuffer(TRUE); StopRecording(); return; } const char *nam = GetKeyName(ev.data); if (nam != NULL) { const char *mod = GetModifierCode(ev.data); if (mod != NULL) { //// handle modifiers if (ev.state == DOWN) { strcat(keyBuffer, mod); strcat(keyBuffer, "("); } else { strcat(keyBuffer, ")"); } } else { //// handle other keys if (ev.state == UP) { //printf("Key: %s (%s)\n", nam, mod); if (strlen(nam) > 1) { // special key strcat(keyBuffer, "{"); strcat(keyBuffer, nam); strcat(keyBuffer, "}"); } else { if (nam[0] == '\'') { // escape this strcat(keyBuffer, "\\"); } strcat(keyBuffer, nam); } } } } else { WriteScript(_("# [Unhandled Key %d/%d]\n"), ev.data, ev.state); } } else { // Mouse, etc. HandleKeyBuffer(TRUE); // Flush out others events... HandleDelay(ev.delay); if (ev.type == MOUSEMOVE) { if (!IsMouseMoveTooGranular(ev)) { WriteScript("MoveMouseAbs(%d, %d);\n", ev.posX, ev.posY); } } else if (ev.type == MOUSEBUTTON) { GetMouseButtonFromIndex(ev.data, buttonName); if (!*buttonName) { WriteScript(_("# [Unhandled Mouse Button %d/%d]\n"), ev.data, ev.state); } else { // TODO: Simplify to 'ClickMouseButton' where possible... if (ev.state == UP) { WriteScript("ReleaseMouseButton(%s);\n", buttonName); } else { WriteScript("PressMouseButton(%s);\n", buttonName); } } } else { //printf("Unhandled event type: %d\n", ev.type); } } memcpy(&lastEvent, &ev, sizeof(struct record_event)); } static BOOL IsMouseMoveTooGranular(struct record_event ev) { if (lastEvent.type != MOUSEMOVE) { return(FALSE); // must be mousemove -> mousemove to count } else { // TODO: Adjust int threshold = (int)MAX_GRANULARITY / granularity - 1; if (ev.delay < threshold) { return(TRUE); } } return(FALSE); } X11-GUITest-0.28/recorder/src/Makefile.in0000644000000000000000000004570412311564211016443 0ustar rootroot# Makefile.in generated by automake 1.13.4 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = x11guirecord$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" PROGRAMS = $(bin_PROGRAMS) am_x11guirecord_OBJECTS = KeyUtil.$(OBJEXT) record.$(OBJEXT) \ script_file.$(OBJEXT) main.$(OBJEXT) x11guirecord_OBJECTS = $(am_x11guirecord_OBJECTS) x11guirecord_LDADD = $(LDADD) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(x11guirecord_SOURCES) DIST_SOURCES = $(x11guirecord_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ XMKMF = @XMKMF@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = $(prefix)/bin build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ DEBUG = -DNOPERL AM_CFLAGS = -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG) -I/usr/include -I../ -I../../ -I/usr/X11R6/include -I/usr/X/include AM_LDFLAGS = -O2 -s -L/usr/X11R6/lib64 -L/usr/X/lib64 -L/usr/lib -L/usr/X11R6/lib -L/usr/X/lib -lXtst -lXext -lX11 -lpopt # -lefence x11guirecord_SOURCES = ../../KeyUtil.c record.c script_file.c main.c all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) x11guirecord$(EXEEXT): $(x11guirecord_OBJECTS) $(x11guirecord_DEPENDENCIES) $(EXTRA_x11guirecord_DEPENDENCIES) @rm -f x11guirecord$(EXEEXT) $(AM_V_CCLD)$(LINK) $(x11guirecord_OBJECTS) $(x11guirecord_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KeyUtil.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/record.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script_file.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` KeyUtil.o: ../../KeyUtil.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT KeyUtil.o -MD -MP -MF $(DEPDIR)/KeyUtil.Tpo -c -o KeyUtil.o `test -f '../../KeyUtil.c' || echo '$(srcdir)/'`../../KeyUtil.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/KeyUtil.Tpo $(DEPDIR)/KeyUtil.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../../KeyUtil.c' object='KeyUtil.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o KeyUtil.o `test -f '../../KeyUtil.c' || echo '$(srcdir)/'`../../KeyUtil.c KeyUtil.obj: ../../KeyUtil.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT KeyUtil.obj -MD -MP -MF $(DEPDIR)/KeyUtil.Tpo -c -o KeyUtil.obj `if test -f '../../KeyUtil.c'; then $(CYGPATH_W) '../../KeyUtil.c'; else $(CYGPATH_W) '$(srcdir)/../../KeyUtil.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/KeyUtil.Tpo $(DEPDIR)/KeyUtil.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../../KeyUtil.c' object='KeyUtil.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o KeyUtil.obj `if test -f '../../KeyUtil.c'; then $(CYGPATH_W) '../../KeyUtil.c'; else $(CYGPATH_W) '$(srcdir)/../../KeyUtil.c'; fi` ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \ distclean distclean-compile distclean-generic distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-binPROGRAMS install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am \ uninstall-binPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: X11-GUITest-0.28/recorder/src/script_file.c0000644000000000000000000000314412264252262017044 0ustar rootroot/* X11::GUITest ($Id: script_file.c 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #include #include #include #include #include #include #include "Common.h" #include "script_file.h" static FILE *sfp = NULL; // script output BOOL OpenScript(char *scriptFile) { sfp = fopen(scriptFile, "wt"); if (sfp == NULL) { fprintf(stderr, _("Unable to open script file '%s'!\n"), scriptFile); return FALSE; } return TRUE; } void WriteScript(char *format, ...) { if (sfp == NULL) { fprintf(stderr, _("Unable to write to script file!\n")); return; } char buffer[MAX_SCRIPT_BUFFER] = "\0"; va_list args; va_start(args, format); vsprintf(buffer, format, args); fwrite(buffer, sizeof(char), strlen(buffer), sfp); va_end(args); } void CloseScript(void) { if (sfp != NULL) { fflush(sfp); fclose(sfp); } } X11-GUITest-0.28/recorder/src/Makefile.am0000644000000000000000000000067012264250157016433 0ustar rootrootDEBUG = -DNOPERL AM_CFLAGS = -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG) -I/usr/include -I../ -I../../ -I/usr/X11R6/include -I/usr/X/include AM_LDFLAGS = -O2 -s -L/usr/X11R6/lib64 -L/usr/X/lib64 -L/usr/lib -L/usr/X11R6/lib -L/usr/X/lib -lXtst -lXext -lX11 -lpopt # -lefence bindir = $(prefix)/bin bin_PROGRAMS = x11guirecord x11guirecord_SOURCES = ../../KeyUtil.c record.c script_file.c main.c X11-GUITest-0.28/recorder/src/record.h0000644000000000000000000000226212264252262016024 0ustar rootroot/* X11::GUITest ($Id: record.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef RECORD_H #define RECORD_H #include #include "record_event.h" int RecordEvents(void (*handleEvent)(struct record_event)); void StopRecording(void); void sigint_handler(int sig); void SetLastTime(void); void SetCurrentTime(void); void EventCallback(XPointer p, XRecordInterceptData *idata); long GetDelay(void); #endif /* #ifndef RECORD_H */ X11-GUITest-0.28/recorder/depcomp0000755000000000000000000005601612311564210015161 0ustar rootroot#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: X11-GUITest-0.28/recorder/configure.ac0000644000000000000000000000117212311564200016062 0ustar rootroot# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.66]) AC_INIT(x11guirecord, 0.28, ctrondlp@cpan.org) AM_INIT_AUTOMAKE(x11guirecord, 0.28) AC_CONFIG_SRCDIR([src/script_file.c]) AC_CONFIG_HEADERS([config.h]) # Checks for programs. AC_PROG_CC # Checks for libraries. # Checks for header files. AC_PATH_X AC_CHECK_HEADERS([stdlib.h string.h sys/time.h unistd.h]) # Checks for typedefs, structures, and compiler characteristics. # Checks for library functions. AC_CHECK_FUNCS([gettimeofday]) AC_OUTPUT(Makefile src/Makefile man/Makefile) X11-GUITest-0.28/docs/0000755000000000000000000000000012311564556012734 5ustar rootrootX11-GUITest-0.28/docs/X11-GUITest.txt0000644000000000000000000006456712311564000015332 0ustar rootrootNAME X11::GUITest - Provides GUI testing/interaction routines. VERSION 0.28 Updates are made available at the following sites: http://sourceforge.net/projects/x11guitest http://www.cpan.org Please consult 'docs/Changes' for the list of changes between module revisions. DESCRIPTION This Perl package is intended to facilitate the testing of GUI applications by means of user emulation. It can be used to test/interact with GUI applications; which have been built upon the X library or toolkits (i.e., GTK+, Xt, Qt, Motif, etc.) that "wrap" the X library's functionality. A basic recorder (x11guirecord) is also available, and can be found in the source code repository. DEPENDENCIES An X server with the XTest extensions enabled. This seems to be the norm. If it is not enabled, it usually can be by modifying the X server configuration (i.e., XF86Config). The standard DISPLAY environment variable is utilized to determine the host, display, and screen to work with. By default it is usually set to ":0.0" for the localhost. However, by altering this variable one can interact with applications under a remote host's X server. To change this from a terminal window, one can utilize the following basic syntax: export DISPLAY=:. Please note that under most circumstances, xhost will need to be executed properly on the remote host as well. There is a known incompatibility between the XTest and Xinerama extensions, which causes the XTestFakeMotionEvent() function to misbehave. When the Xinerama (X server) extension is turned on, this (Perl) extension has been modified to allow one to invoke an alternative function. See Makefile.PL for details. INSTALLATION perl Makefile.PL make make test make install # If the build has errors, you may need to install the following dependencies: # libxt-dev, libxtst-dev # If you'd like to install the recorder, use these steps: cd recorder ./autogen.sh ./configure make make install x11guirecord --help SYNOPSIS For additional examples, please look under the 'eg/' sub-directory from the installation folder. use X11::GUITest qw/ StartApp WaitWindowViewable SendKeys /; # Start gedit application StartApp('gedit'); # Wait for application window to come up and become viewable. my ($GEditWinId) = WaitWindowViewable('gedit'); if (!$GEditWinId) { die("Couldn't find gedit window in time!"); } # Send text to it SendKeys("Hello, how are you?\n"); # Close Application (Alt-f, q). SendKeys('%(f)q'); # Handle gedit's Question window if it comes up when closing. Wait # at most 5 seconds for it. if (WaitWindowViewable('Question', undef, 5)) { # DoN't Save (Alt-n) SendKeys('%(n)'); } FUNCTIONS Parameters enclosed within [] are optional. If there are multiple optional parameters available for a function and you would like to specify the last one, for example, you can utilize undef for those parameters you don't specify. REGEX in the documentation below denotes an item that is treated as a regular expression. For example, the regex "^OK$" would look for an exact match for the word OK. FindWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] Finds the window Ids of the windows matching the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = FindWindowLike('gedit'); # Only worry about first window found my ($WindowId) = FindWindowLike('gedit'); WaitWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Waits for a window to come up that matches the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window. One can optionally specify an alternative wait amount in seconds. A window will keep being looked for that matches the specified title regex until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. If a window is going to be manipulated by input, WaitWindowViewable is the more robust solution to utilize. An array of window Ids is returned for the matches found. An empty array is returned if no matches were found. my @WindowIds = WaitWindowLike('gedit'); # Only worry about first window found my ($WindowId) = WaitWindowLike('gedit'); WaitWindowLike('gedit') or die("gedit window not found!"); WaitWindowViewable TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS] Similar to WaitWindow, but only recognizes windows that are viewable. When GUI applications are started, their window isn't necessarily viewable yet, let alone available for input, so this function is very useful. Likewise, this function will only return an array of the matching window Ids for those windows that are viewable. An empty array is returned if no matches were found. WaitWindowClose WINDOWID [, MAXWAITINSECONDS] Waits for the specified window to close. One can optionally specify an alternative wait amount in seconds. The window will keep being checked to see if it has closed until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag. zero is returned if window is not gone, non-zero if it is gone. WaitSeconds SECONDS Pauses execution for the specified amount of seconds. WaitSeconds(0.5); # Wait 1/2 second WaitSeconds(3); # Wait 3 seconds ClickWindow WINDOWID [, X Offset] [, Y Offset] [, Button] Clicks on the specified window with the mouse. Optionally one can specify the X offset and Y offset. By default, the top left corner of the window is clicked on, with these two parameters one can specify a different position to be clicked on. One can also specify an alternative button. The default button is M_LEFT, but M_MIDDLE and M_RIGHT may be specified too. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success GetWindowsFromPid Returns a list of window ids discovered for the specified process id (pid). undef is returned on error. GetWindowFromPoint X, Y [, SCREEN] Returns the window that is at the specified point. If no screen is given, it is taken from the value given when opening the X display. zero is returned if there are no matches (i.e., off screen). IsChild PARENTWINDOWID, WINDOWID Determines if the specified window is a child of the specified parent. zero is returned for false, non-zero for true. QuoteStringForSendKeys STRING Quotes {} characters in the specified string that would be interpreted as having special meaning if sent to SendKeys directly. This function would be useful if you had a text file in which you wanted to use each line of the file as input to the SendKeys function, but didn't want any special interpretation of the characters in the file. Returns the quoted string, undef is returned on error. # Quote ~, %, etc. as {~}, {%}, etc for literal use in SendKeys. SendKeys( QuoteStringForSendKeys('Hello: ~%^(){}+#') ); SendKeys( QSfSK('#+#') ); The international AltGr key - modifier character (&) is not escaped by this function. Escape this character manually ("{&}"), if used/needed. StartApp COMMANDLINE Uses the shell to execute a program. This function returns as soon as the program is called. Useful for starting GUI /applications and then going on to work with them. zero is returned on failure, non-zero for success StartApp('gedit'); RunApp COMMANDLINE Uses the shell to execute a program until its completion. Return value will be application specific, however -1 is returned to indicate a failure in starting the program. RunApp('/work/myapp'); ClickMouseButton BUTTON Clicks the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. DefaultScreen Returns the screen number specified in the X display value used to open the display. Leverages the Xlib macro of the same name. ScreenCount Returns the number of screens in the X display specified when opening it. Leverages the Xlib macro of the same name. SetEventSendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between events being sent to the X display. It is usually not a good idea to set this to 0. Please note that this delay will also affect SendKeys. Returns the old delay amount in milliseconds. GetEventSendDelay Returns the current event sending delay amount in milliseconds. SetKeySendDelay DELAYINMILLISECONDS Sets the milliseconds of delay between keystrokes. Returns the old delay amount in milliseconds. GetKeySendDelay Returns the current keystroke sending delay amount in milliseconds. GetWindowName WINDOWID Returns the window name for the specified window Id. undef is returned if name could not be obtained. # Return the name of the window that has the input focus. my $WinName = GetWindowName(GetInputFocus()); GetWindowPid WINDOWID Returns the process id (pid) associated with the specified window. 0 is returned if the pid is not available. # Return the pid of the window that has the input focus. my $pid = GetWindowPid(GetInputFocus()); SetWindowName WINDOWID, NAME Sets the window name for the specified window Id. zero is returned on failure, non-zero for success. GetRootWindow [SCREEN] Returns the Id of the root window of the screen. This is the top/root level window that all other windows are under. If no screen is given, it is taken from the value given when opening the X display. GetChildWindows WINDOWID Returns an array of the child windows for the specified window Id. If it detects that the window hierarchy is in transition, it will wait half a second and try again. MoveMouseAbs X, Y [, SCREEN] Moves the mouse cursor to the specified absolute position in the optionally given screen. If no screen is given, it is taken from the value given when opening the X display. Zero is returned on failure, non-zero for success. GetMousePos Returns an array containing the position and the screen (number) of the mouse cursor. my ($x, $y, $scr_num) = GetMousePos(); PressMouseButton BUTTON Presses the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. ReleaseMouseButton BUTTON Releases the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. zero is returned on failure, non-zero for success. SendKeys KEYS Sends keystrokes to the window that has the input focus. The keystrokes to send are those specified in KEYS parameter. Some characters have special meaning, they are: Modifier Keys: ^ CTRL % ALT + SHIFT # META & ALTGR Other Keys: ~ ENTER \n ENTER \t TAB ( and ) MODIFIER GROUPING { and } QUOTE / ESCAPE CHARACTERS Simply, one can send a text string like so: SendKeys('Hello, how are you today?'); Parenthesis allow a modifier to work on one or more characters. For example: SendKeys('%(f)q'); # Alt-f, then press q SendKeys('%(fa)^(m)'); # Alt-f, Alt-a, Ctrl-m SendKeys('+(abc)'); # Uppercase ABC using shift modifier SendKeys('^(+(l))'); # Ctrl-Shift-l SendKeys('+'); # Press shift Braces are used to quote special characters, for utilizing aliased key names, or for special functionality. Multiple characters can be specified in a brace by space delimiting the entries. Characters can be repeated using a number that is space delimited after the preceding key. Quote Special Characters SendKeys('{{}'); # { SendKeys('{+}'); # + SendKeys('{#}'); # # You can also use QuoteStringForSendKeys (QSfSK) to perform quoting. Aliased Key Names SendKeys('{BAC}'); # Backspace SendKeys('{F1 F2 F3}'); # F1, F2, F3 SendKeys('{TAB 3}'); # Press TAB 3 times SendKeys('{SPC 3 a b c}'); # Space 3 times, a, b, c Special Functionality # Pause execution for 500 milliseconds SendKeys('{PAUSE 500}'); Combinations SendKeys('abc+(abc){TAB PAUSE 500}'); # a, b, c, A, B, C, Tab, Pause 500 SendKeys('+({a b c})'); # A, B, C The following abbreviated key names are currently recognized within a brace set. If you don't see the desired key, you can still use the unabbreviated name for the key. If you are unsure of this name, utilize the xev (X event view) tool, press the key you want and look at the tools output for the name of that key. Names that are in the list below can be utilized regardless of case. Ones that aren't in this list are going to be case sensitive and also not abbreviated. For example, using 'xev' you will find that the name of the backspace key is BackSpace, so you could use {BackSpace} in place of {bac} if you really wanted to. Name Action ------------------- BAC BackSpace BS BackSpace BKS BackSpace BRE Break CAN Cancel CAP Caps_Lock DEL Delete DOWN Down END End ENT Return ESC Escape F1 F1 ... ... F12 F12 HEL Help HOM Home INS Insert LAL Alt_L LMA Meta_L LCT Control_L LEF Left LSH Shift_L LSK Super_L MNU Menu NUM Num_Lock PGD Page_Down PGU Page_Up PRT Print RAL Alt_R RMA Meta_R RCT Control_R RIG Right RSH Shift_R RSK Super_R SCR Scroll_Lock SPA Space SPC Space TAB Tab UP Up zero is returned on failure, non-zero for success. For configurations (Xvfb) that don't support Alt_Left, Meta_Left is automatically used in its place. PressKey KEY Presses the specified key. One can utilize the abbreviated key names from the table listed above as outlined in the following example: # Alt-n PressKey('LAL'); # Left Alt PressKey('n'); ReleaseKey('n'); ReleaseKey('LAL'); # Uppercase a PressKey('LSH'); # Left Shift PressKey('a'); ReleaseKey('a'); ReleaseKey('LSH'); The ReleaseKey calls in the above example are there to set both key states back. zero is returned on failure, non-zero for success. ReleaseKey KEY Releases the specified key. Normally follows a PressKey call. One can utilize the abbreviated key names from the table listed above. ReleaseKey('n'); zero is returned on failure, non-zero for success. PressReleaseKey KEY Presses and releases the specified key. One can utilize the abbreviated key names from the table listed above. PressReleaseKey('n'); This function is affected by the key send delay. zero is returned on failure, non-zero for success. IsKeyPressed KEY Determines if the specified key is currently being pressed. You can specify such things as 'bac' or the unabbreviated form 'BackSpace' as covered in the SendKeys information. Brace forms such as '{bac}' are unsupported. A '{' is taken literally and letters are case sensitive. if (IsKeyPressed('esc')) { # Is Escape pressed? if (IsKeyPressed('a')) { # Is a pressed? if (IsKeyPressed('A')) { # Is A pressed? Returns non-zero for true, zero for false. IsMouseButtonPressed BUTTON Determines if the specified mouse button is currently being pressed. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag. if (IsMouseButtonPressed(M_LEFT)) { # Is left button pressed? Returns non-zero for true, zero for false. IsWindow WINDOWID zero is returned if the specified window Id is not for something that can be recognized as a window. non-zero is returned if it looks like a window. IsWindowViewable WINDOWID zero is returned if the specified window Id is for a window that isn't viewable. non-zero is returned if the window is viewable. IsWindowCursor WINDOWID CURSOR Determines if the specified window has the specified cursor. zero is returned for false, non-zero for true. The following cursors are available through the :CONST export tag. Name ------------------- XC_NUM_GLYPHS XC_X_CURSOR XC_ARROW XC_BASED_ARROW_DOWN XC_BASED_ARROW_UP XC_BOAT XC_BOGOSITY XC_BOTTOM_LEFT_CORNER XC_BOTTOM_RIGHT_CORNER XC_BOTTOM_SIDE XC_BOTTOM_TEE XC_BOX_SPIRAL XC_CENTER_PTR XC_CIRCLE XC_CLOCK XC_COFFEE_MUG XC_CROSS XC_CROSS_REVERSE XC_CROSSHAIR XC_DIAMOND_CROSS XC_DOT XC_DOTBOX XC_DOUBLE_ARROW XC_DRAFT_LARGE XC_DRAFT_SMALL XC_DRAPED_BOX XC_EXCHANGE XC_FLEUR XC_GOBBLER XC_GUMBY XC_HAND1 XC_HAND2 XC_HEART XC_ICON XC_IRON_CROSS XC_LEFT_PTR XC_LEFT_SIDE XC_LEFT_TEE XC_LEFTBUTTON XC_LL_ANGLE XC_LR_ANGLE XC_MAN XC_MIDDLEBUTTON XC_MOUSE XC_PENCIL XC_PIRATE XC_PLUS XC_QUESTION_ARROW XC_RIGHT_PTR XC_RIGHT_SIDE XC_RIGHT_TEE XC_RIGHTBUTTON XC_RTL_LOGO XC_SAILBOAT XC_SB_DOWN_ARROW XC_SB_H_DOUBLE_ARROW XC_SB_LEFT_ARROW XC_SB_RIGHT_ARROW XC_SB_UP_ARROW XC_SB_V_DOUBLE_ARROW XC_SHUTTLE XC_SIZING XC_SPIDER XC_SPRAYCAN XC_STAR XC_TARGET XC_TCROSS XC_TOP_LEFT_ARROW XC_TOP_LEFT_CORNER XC_TOP_RIGHT_CORNER XC_TOP_SIDE XC_TOP_TEE XC_TREK XC_UL_ANGLE XC_UMBRELLA XC_UR_ANGLE XC_WATCH XC_XTERM MoveWindow WINDOWID, X, Y Moves the window to the specified location. zero is returned on failure, non-zero for success. ResizeWindow WINDOWID, WIDTH, HEIGHT Resizes the window to the specified size. zero is returned on failure, non-zero for success. IconifyWindow WINDOWID Minimizes (Iconifies) the specified window. zero is returned on failure, non-zero for success. UnIconifyWindow WINDOWID Unminimizes (UnIconifies) the specified window. zero is returned on failure, non-zero for success. RaiseWindow WINDOWID Raises the specified window to the top of the stack, so that no other windows cover it. zero is returned on failure, non-zero for success. LowerWindow WINDOWID Lowers the specified window to the bottom of the stack, so other existing windows will cover it. zero is returned on failure, non-zero for success. GetInputFocus Returns the window that currently has the input focus. SetInputFocus WINDOWID Sets the specified window to be the one that has the input focus. zero is returned on failure, non-zero for success. GetWindowPos WINDOWID Returns an array containing the position information for the specified window. It also returns size information (including border width) and the number of the screen where the window resides. my ($x, $y, $width, $height, $borderWidth, $screen) = GetWindowPos(GetRootWindow()); GetParentWindow WINDOWID Returns the parent of the specified window. zero is returned if parent couldn't be determined (i.e., root window). GetScreenDepth [SCREEN] Returns the color depth for the screen. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, -1 will be returned. Value is represented as bits, i.e. 16. my $depth = GetScreenDepth(); GetScreenRes [SCREEN] Returns the screen resolution. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, the returned list will be empty. my ($x, $y) = GetScreenRes(); OTHER DOCUMENTATION Available under the docs sub-directory. CodingStyle (Coding-Style Guidelines) Copying (Copy of the GPL License) COPYRIGHT Copyright(c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License. AUTHOR Dennis K. Paulsen (Iowa USA) CONTRIBUTORS Paulo E. Castro CREDITS Thanks to everyone; including those specifically mentioned below for patches, suggestions, etc.: David Dick Alexey Tourbin Richard Clamp Gustav Larsson Nelson D. Caro X11-GUITest-0.28/docs/Copying0000644000000000000000000004325512307065637014301 0ustar rootroot GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. X11-GUITest-0.28/docs/X11-GUITest.html0000644000000000000000000006710212311564000015443 0ustar rootroot

NAME

X11::GUITest - Provides GUI testing/interaction routines.

VERSION

0.28

Updates are made available at the following sites:

  http://sourceforge.net/projects/x11guitest
  http://www.cpan.org

Please consult 'docs/Changes' for the list of changes between module revisions.

DESCRIPTION

This Perl package is intended to facilitate the testing of GUI applications by means of user emulation. It can be used to test/interact with GUI applications; which have been built upon the X library or toolkits (i.e., GTK+, Xt, Qt, Motif, etc.) that "wrap" the X library's functionality.

A basic recorder (x11guirecord) is also available, and can be found in the source code repository.

DEPENDENCIES

An X server with the XTest extensions enabled. This seems to be the norm. If it is not enabled, it usually can be by modifying the X server configuration (i.e., XF86Config).

The standard DISPLAY environment variable is utilized to determine the host, display, and screen to work with. By default it is usually set to ":0.0" for the localhost. However, by altering this variable one can interact with applications under a remote host's X server. To change this from a terminal window, one can utilize the following basic syntax: export DISPLAY=<hostname-or-ipaddress>:<display>.<screen> Please note that under most circumstances, xhost will need to be executed properly on the remote host as well.

There is a known incompatibility between the XTest and Xinerama extensions, which causes the XTestFakeMotionEvent() function to misbehave. When the Xinerama (X server) extension is turned on, this (Perl) extension has been modified to allow one to invoke an alternative function. See Makefile.PL for details.

INSTALLATION

  perl Makefile.PL
  make
  make test
  make install

  # If the build has errors, you may need to install the following dependencies:
  #    libxt-dev, libxtst-dev

  # If you'd like to install the recorder, use these steps:
  cd recorder
  ./autogen.sh
  ./configure
  make
  make install
  x11guirecord --help

SYNOPSIS

For additional examples, please look under the 'eg/' sub-directory from the installation folder.

  use X11::GUITest qw/
    StartApp
    WaitWindowViewable
    SendKeys
  /;

  # Start gedit application
  StartApp('gedit');

  # Wait for application window to come up and become viewable.
  my ($GEditWinId) = WaitWindowViewable('gedit');
  if (!$GEditWinId) {
    die("Couldn't find gedit window in time!");
  }

  # Send text to it
  SendKeys("Hello, how are you?\n");

  # Close Application (Alt-f, q).
  SendKeys('%(f)q');

  # Handle gedit's Question window if it comes up when closing.  Wait
  # at most 5 seconds for it.
  if (WaitWindowViewable('Question', undef, 5)) {
    # DoN't Save (Alt-n)
    SendKeys('%(n)');
  }

FUNCTIONS

Parameters enclosed within [] are optional.

If there are multiple optional parameters available for a function and you would like to specify the last one, for example, you can utilize undef for those parameters you don't specify.

REGEX in the documentation below denotes an item that is treated as a regular expression. For example, the regex "^OK$" would look for an exact match for the word OK.

FindWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER]

Finds the window Ids of the windows matching the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window.

An array of window Ids is returned for the matches found. An empty array is returned if no matches were found.

  my @WindowIds = FindWindowLike('gedit');
  # Only worry about first window found
  my ($WindowId) = FindWindowLike('gedit');
WaitWindowLike TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS]

Waits for a window to come up that matches the specified title regex. Optionally one can specify the window to start under; which would allow one to constrain the search to child windows of that window.

One can optionally specify an alternative wait amount in seconds. A window will keep being looked for that matches the specified title regex until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag.

If a window is going to be manipulated by input, WaitWindowViewable is the more robust solution to utilize.

An array of window Ids is returned for the matches found. An empty array is returned if no matches were found.

  my @WindowIds = WaitWindowLike('gedit');
  # Only worry about first window found
  my ($WindowId) = WaitWindowLike('gedit');

  WaitWindowLike('gedit') or die("gedit window not found!");
WaitWindowViewable TITLEREGEX [, WINDOWIDSTARTUNDER] [, MAXWAITINSECONDS]

Similar to WaitWindow, but only recognizes windows that are viewable. When GUI applications are started, their window isn't necessarily viewable yet, let alone available for input, so this function is very useful.

Likewise, this function will only return an array of the matching window Ids for those windows that are viewable. An empty array is returned if no matches were found.

WaitWindowClose WINDOWID [, MAXWAITINSECONDS]

Waits for the specified window to close.

One can optionally specify an alternative wait amount in seconds. The window will keep being checked to see if it has closed until this amount of time has been reached. The default amount is defined in the DEF_WAIT constant available through the :CONST export tag.

zero is returned if window is not gone, non-zero if it is gone.

WaitSeconds SECONDS

Pauses execution for the specified amount of seconds.

  WaitSeconds(0.5); # Wait 1/2 second
  WaitSeconds(3); # Wait 3 seconds
ClickWindow WINDOWID [, X Offset] [, Y Offset] [, Button]

Clicks on the specified window with the mouse.

Optionally one can specify the X offset and Y offset. By default, the top left corner of the window is clicked on, with these two parameters one can specify a different position to be clicked on.

One can also specify an alternative button. The default button is M_LEFT, but M_MIDDLE and M_RIGHT may be specified too. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag.

zero is returned on failure, non-zero for success

GetWindowsFromPid

Returns a list of window ids discovered for the specified process id (pid).

undef is returned on error.

GetWindowFromPoint X, Y [, SCREEN]

Returns the window that is at the specified point. If no screen is given, it is taken from the value given when opening the X display.

zero is returned if there are no matches (i.e., off screen).

IsChild PARENTWINDOWID, WINDOWID

Determines if the specified window is a child of the specified parent.

zero is returned for false, non-zero for true.

QuoteStringForSendKeys STRING

Quotes {} characters in the specified string that would be interpreted as having special meaning if sent to SendKeys directly. This function would be useful if you had a text file in which you wanted to use each line of the file as input to the SendKeys function, but didn't want any special interpretation of the characters in the file.

Returns the quoted string, undef is returned on error.

  # Quote  ~, %, etc.  as  {~}, {%}, etc for literal use in SendKeys.
  SendKeys( QuoteStringForSendKeys('Hello: ~%^(){}+#') );
  SendKeys( QSfSK('#+#') );

The international AltGr key - modifier character (&) is not escaped by this function. Escape this character manually ("{&}"), if used/needed.

StartApp COMMANDLINE

Uses the shell to execute a program. This function returns as soon as the program is called. Useful for starting GUI /applications and then going on to work with them.

zero is returned on failure, non-zero for success

  StartApp('gedit');
RunApp COMMANDLINE

Uses the shell to execute a program until its completion.

Return value will be application specific, however -1 is returned to indicate a failure in starting the program.

  RunApp('/work/myapp');
ClickMouseButton BUTTON

Clicks the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag.

zero is returned on failure, non-zero for success.

DefaultScreen

Returns the screen number specified in the X display value used to open the display.

Leverages the Xlib macro of the same name.

ScreenCount

Returns the number of screens in the X display specified when opening it.

Leverages the Xlib macro of the same name.

SetEventSendDelay DELAYINMILLISECONDS

Sets the milliseconds of delay between events being sent to the X display. It is usually not a good idea to set this to 0.

Please note that this delay will also affect SendKeys.

Returns the old delay amount in milliseconds.

GetEventSendDelay

Returns the current event sending delay amount in milliseconds.

SetKeySendDelay DELAYINMILLISECONDS

Sets the milliseconds of delay between keystrokes.

Returns the old delay amount in milliseconds.

GetKeySendDelay

Returns the current keystroke sending delay amount in milliseconds.

GetWindowName WINDOWID

Returns the window name for the specified window Id. undef is returned if name could not be obtained.

  # Return the name of the window that has the input focus.
  my $WinName = GetWindowName(GetInputFocus());
GetWindowPid WINDOWID

Returns the process id (pid) associated with the specified window. 0 is returned if the pid is not available.

  # Return the pid of the window that has the input focus.
  my $pid = GetWindowPid(GetInputFocus());
SetWindowName WINDOWID, NAME

Sets the window name for the specified window Id.

zero is returned on failure, non-zero for success.

GetRootWindow [SCREEN]

Returns the Id of the root window of the screen. This is the top/root level window that all other windows are under. If no screen is given, it is taken from the value given when opening the X display.

GetChildWindows WINDOWID

Returns an array of the child windows for the specified window Id. If it detects that the window hierarchy is in transition, it will wait half a second and try again.

MoveMouseAbs X, Y [, SCREEN]

Moves the mouse cursor to the specified absolute position in the optionally given screen. If no screen is given, it is taken from the value given when opening the X display.

Zero is returned on failure, non-zero for success.

GetMousePos

Returns an array containing the position and the screen (number) of the mouse cursor.

  my ($x, $y, $scr_num) = GetMousePos();
PressMouseButton BUTTON

Presses the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag.

zero is returned on failure, non-zero for success.

ReleaseMouseButton BUTTON

Releases the specified mouse button. Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT, M_DOWN, M_UP. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag.

zero is returned on failure, non-zero for success.

SendKeys KEYS

Sends keystrokes to the window that has the input focus.

The keystrokes to send are those specified in KEYS parameter. Some characters have special meaning, they are:

        Modifier Keys:
        ^       CTRL
        %       ALT
        +       SHIFT
        #       META
        &       ALTGR

        Other Keys:
        ~       ENTER
        \n      ENTER
        \t      TAB
        ( and ) MODIFIER GROUPING
        { and } QUOTE / ESCAPE CHARACTERS

Simply, one can send a text string like so:

        SendKeys('Hello, how are you today?');

Parenthesis allow a modifier to work on one or more characters. For example:

        SendKeys('%(f)q'); # Alt-f, then press q
        SendKeys('%(fa)^(m)'); # Alt-f, Alt-a, Ctrl-m
        SendKeys('+(abc)'); # Uppercase ABC using shift modifier
        SendKeys('^(+(l))'); # Ctrl-Shift-l
        SendKeys('+'); # Press shift

Braces are used to quote special characters, for utilizing aliased key names, or for special functionality. Multiple characters can be specified in a brace by space delimiting the entries. Characters can be repeated using a number that is space delimited after the preceding key.

Quote Special Characters

        SendKeys('{{}'); # {
        SendKeys('{+}'); # +
        SendKeys('{#}'); # #

        You can also use QuoteStringForSendKeys (QSfSK) to perform quoting.

Aliased Key Names

        SendKeys('{BAC}'); # Backspace
        SendKeys('{F1 F2 F3}'); # F1, F2, F3
        SendKeys('{TAB 3}'); # Press TAB 3 times
        SendKeys('{SPC 3 a b c}'); # Space 3 times, a, b, c

Special Functionality

        # Pause execution for 500 milliseconds
        SendKeys('{PAUSE 500}');

Combinations

        SendKeys('abc+(abc){TAB PAUSE 500}'); # a, b, c, A, B, C, Tab, Pause 500
        SendKeys('+({a b c})'); # A, B, C

The following abbreviated key names are currently recognized within a brace set. If you don't see the desired key, you can still use the unabbreviated name for the key. If you are unsure of this name, utilize the xev (X event view) tool, press the key you want and look at the tools output for the name of that key. Names that are in the list below can be utilized regardless of case. Ones that aren't in this list are going to be case sensitive and also not abbreviated. For example, using 'xev' you will find that the name of the backspace key is BackSpace, so you could use {BackSpace} in place of {bac} if you really wanted to.

        Name    Action
        -------------------
        BAC     BackSpace
        BS      BackSpace
        BKS     BackSpace
        BRE     Break
        CAN     Cancel
        CAP     Caps_Lock
        DEL     Delete
        DOWN    Down
        END     End
        ENT     Return
        ESC     Escape
        F1      F1
        ...     ...
        F12     F12
        HEL     Help
        HOM     Home
        INS     Insert
        LAL     Alt_L
        LMA     Meta_L
        LCT     Control_L
        LEF     Left
        LSH     Shift_L
        LSK     Super_L
        MNU     Menu
        NUM     Num_Lock
        PGD     Page_Down
        PGU     Page_Up
        PRT     Print
        RAL     Alt_R
        RMA     Meta_R
        RCT     Control_R
        RIG     Right
        RSH     Shift_R
        RSK     Super_R
        SCR     Scroll_Lock
        SPA     Space
        SPC     Space
        TAB     Tab
        UP      Up

zero is returned on failure, non-zero for success. For configurations (Xvfb) that don't support Alt_Left, Meta_Left is automatically used in its place.

PressKey KEY

Presses the specified key.

One can utilize the abbreviated key names from the table listed above as outlined in the following example:

  # Alt-n
  PressKey('LAL'); # Left Alt
  PressKey('n');
  ReleaseKey('n');
  ReleaseKey('LAL');

  # Uppercase a
  PressKey('LSH'); # Left Shift
  PressKey('a');
  ReleaseKey('a');
  ReleaseKey('LSH');

The ReleaseKey calls in the above example are there to set both key states back.

zero is returned on failure, non-zero for success.

ReleaseKey KEY

Releases the specified key. Normally follows a PressKey call.

One can utilize the abbreviated key names from the table listed above.

  ReleaseKey('n');

zero is returned on failure, non-zero for success.

PressReleaseKey KEY

Presses and releases the specified key.

One can utilize the abbreviated key names from the table listed above.

  PressReleaseKey('n');

This function is affected by the key send delay.

zero is returned on failure, non-zero for success.

IsKeyPressed KEY

Determines if the specified key is currently being pressed.

You can specify such things as 'bac' or the unabbreviated form 'BackSpace' as covered in the SendKeys information. Brace forms such as '{bac}' are unsupported. A '{' is taken literally and letters are case sensitive.

  if (IsKeyPressed('esc')) {  # Is Escape pressed?
  if (IsKeyPressed('a')) { # Is a pressed?
  if (IsKeyPressed('A')) { # Is A pressed?

Returns non-zero for true, zero for false.

IsMouseButtonPressed BUTTON

Determines if the specified mouse button is currently being pressed.

Available mouse buttons are: M_LEFT, M_MIDDLE, M_RIGHT. Also, you could use the logical Id for the button: M_BTN1, M_BTN2, M_BTN3, M_BTN4, M_BTN5. These are all available through the :CONST export tag.

  if (IsMouseButtonPressed(M_LEFT)) { # Is left button pressed?

Returns non-zero for true, zero for false.

IsWindow WINDOWID

zero is returned if the specified window Id is not for something that can be recognized as a window. non-zero is returned if it looks like a window.

IsWindowViewable WINDOWID

zero is returned if the specified window Id is for a window that isn't viewable. non-zero is returned if the window is viewable.

IsWindowCursor WINDOWID CURSOR

Determines if the specified window has the specified cursor.

zero is returned for false, non-zero for true.

The following cursors are available through the :CONST export tag.

    Name
    -------------------
        XC_NUM_GLYPHS
        XC_X_CURSOR
        XC_ARROW
        XC_BASED_ARROW_DOWN
        XC_BASED_ARROW_UP
        XC_BOAT
        XC_BOGOSITY
        XC_BOTTOM_LEFT_CORNER
        XC_BOTTOM_RIGHT_CORNER
        XC_BOTTOM_SIDE
        XC_BOTTOM_TEE
        XC_BOX_SPIRAL
        XC_CENTER_PTR
        XC_CIRCLE
        XC_CLOCK
        XC_COFFEE_MUG
        XC_CROSS
        XC_CROSS_REVERSE
        XC_CROSSHAIR
        XC_DIAMOND_CROSS
        XC_DOT
        XC_DOTBOX
        XC_DOUBLE_ARROW
        XC_DRAFT_LARGE
        XC_DRAFT_SMALL
        XC_DRAPED_BOX
        XC_EXCHANGE
        XC_FLEUR
        XC_GOBBLER
        XC_GUMBY
        XC_HAND1
        XC_HAND2
        XC_HEART
        XC_ICON
        XC_IRON_CROSS
        XC_LEFT_PTR
        XC_LEFT_SIDE
        XC_LEFT_TEE
        XC_LEFTBUTTON
        XC_LL_ANGLE
        XC_LR_ANGLE
        XC_MAN
        XC_MIDDLEBUTTON
        XC_MOUSE
        XC_PENCIL
        XC_PIRATE
        XC_PLUS
        XC_QUESTION_ARROW
        XC_RIGHT_PTR
        XC_RIGHT_SIDE
        XC_RIGHT_TEE
        XC_RIGHTBUTTON
        XC_RTL_LOGO
        XC_SAILBOAT
        XC_SB_DOWN_ARROW
        XC_SB_H_DOUBLE_ARROW
        XC_SB_LEFT_ARROW
        XC_SB_RIGHT_ARROW
        XC_SB_UP_ARROW
        XC_SB_V_DOUBLE_ARROW
        XC_SHUTTLE
        XC_SIZING
        XC_SPIDER
        XC_SPRAYCAN
        XC_STAR
        XC_TARGET
        XC_TCROSS
        XC_TOP_LEFT_ARROW
        XC_TOP_LEFT_CORNER
        XC_TOP_RIGHT_CORNER
        XC_TOP_SIDE
        XC_TOP_TEE
        XC_TREK
        XC_UL_ANGLE
        XC_UMBRELLA
        XC_UR_ANGLE
        XC_WATCH
        XC_XTERM
MoveWindow WINDOWID, X, Y

Moves the window to the specified location.

zero is returned on failure, non-zero for success.

ResizeWindow WINDOWID, WIDTH, HEIGHT

Resizes the window to the specified size.

zero is returned on failure, non-zero for success.

IconifyWindow WINDOWID

Minimizes (Iconifies) the specified window.

zero is returned on failure, non-zero for success.

UnIconifyWindow WINDOWID

Unminimizes (UnIconifies) the specified window.

zero is returned on failure, non-zero for success.

RaiseWindow WINDOWID

Raises the specified window to the top of the stack, so that no other windows cover it.

zero is returned on failure, non-zero for success.

LowerWindow WINDOWID

Lowers the specified window to the bottom of the stack, so other existing windows will cover it.

zero is returned on failure, non-zero for success.

GetInputFocus

Returns the window that currently has the input focus.

SetInputFocus WINDOWID

Sets the specified window to be the one that has the input focus.

zero is returned on failure, non-zero for success.

GetWindowPos WINDOWID

Returns an array containing the position information for the specified window. It also returns size information (including border width) and the number of the screen where the window resides.

  my ($x, $y, $width, $height, $borderWidth, $screen) =
        GetWindowPos(GetRootWindow());
GetParentWindow WINDOWID

Returns the parent of the specified window.

zero is returned if parent couldn't be determined (i.e., root window).

GetScreenDepth [SCREEN]

Returns the color depth for the screen. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, -1 will be returned.

Value is represented as bits, i.e. 16.

  my $depth = GetScreenDepth();
GetScreenRes [SCREEN]

Returns the screen resolution. If no screen is specified, it is taken from the value given when opening the X display. If the screen (number) is invalid, the returned list will be empty.

  my ($x, $y) = GetScreenRes();

OTHER DOCUMENTATION

Module Changes
Coding-Style Guidelines
ToDo List
Copy of the GPL License

COPYRIGHT

Copyright(c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License.

AUTHOR

Dennis K. Paulsen <ctrondlp@cpan.org> (Iowa USA)

CONTRIBUTORS

Paulo E. Castro <pauloedgarcastro tata gmail.com>

CREDITS

Thanks to everyone; including those specifically mentioned below for patches, suggestions, etc.:

  David Dick
  Alexey Tourbin
  Richard Clamp
  Gustav Larsson
  Nelson D. Caro
X11-GUITest-0.28/docs/CodingStyle0000644000000000000000000000252212264250157015100 0ustar rootrootX11::GUITest ($Id: CodingStyle 203 2011-05-15 02:03:11Z ctrondlp $) This is a short list of coding style guidelines to be used when developing for this project. -------------------------------------------------------------------- General: - Utilize language idioms for aspects not covered below. - Be consistent. - Write the code for people first, computers second. - If you are just adding enhancements to an existing module and not rewriting it, you should maintain the existing coding styles that are in place. Indentation: - 4 character indents Braces/Spacing: int func(void) { } if (var) { printf("Hello\n"); } while (true) { } Variables: - Descriptive names for globals or ones that are file scoped. Mixed case is also prefered for these. - Shorter names can be used for locals. - Use static and const when appropriate. - Perl variables should be scoped appropriately. Functions/Subroutines: - Utilize mixed case, first character of each word capitalized - Noun, Verb, etc. ordering of function names should be consistent (i.e., GetThis, SetThat) Commenting: - Don't try to explain HOW your code works, rather explain WHY it is doing what it does. - And if you have to explain a lot about your code, consider rewriting your code to be easier to follow. -------------------------------------------------------------------- X11-GUITest-0.28/Common.h0000644000000000000000000000241512311563756013410 0ustar rootroot/* X11::GUITest ($Id: Common.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef COMMON_H #define COMMON_H #define APP_VERSION "0.28" #define APP_TEXTDOMAIN "/usr/share/locale" #ifndef _ #define _(str) gettext(str) #endif #ifndef TRUE #define TRUE (1) #endif #ifndef FALSE #define FALSE (0) #endif #ifndef BOOL #define BOOL int #endif #ifndef UINT #define UINT unsigned int #endif #ifndef ULONG #define ULONG unsigned long #endif #ifndef NUL #define NUL '\0' #endif #ifndef MAX_PATH #define MAX_PATH 255 #endif #endif /* #ifndef COMMON_H */ X11-GUITest-0.28/GUITest.xs0000644000000000000000000007317012311300105013626 0ustar rootroot/* X11::GUITest ($Id: GUITest.xs 239 2014-03-16 10:43:17Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifdef __cplusplus extern "C" { #endif #include "EXTERN.h" #include "perl.h" #include "XSUB.h" #ifdef __cplusplus } #endif /* Added for pre-v5.6.x Perl */ #ifndef newSVuv #define newSVuv newSViv #endif #include #include #include #include #include #include #include #include #include #include #include #include "Common.h" #include "GUITest.h" #include "KeyUtil.h" /* File Level Variables */ static Display *TheXDisplay = NULL; static int TheScreen = 0; static WindowTable ChildWindows = {0}; static ULONG EventSendDelay = DEF_EVENT_SEND_DELAY; static ULONG KeySendDelay = DEF_KEY_SEND_DELAY; static int (*OldErrorHandler)(Display *, XErrorEvent *) = NULL; /* Non Exported Utility Functions: */ /* Function: IgnoreBadWindow * Description: User defined error handler callback for X event errors. */ static int IgnoreBadWindow(Display *display, XErrorEvent *error) { /* Ignore bad window errors here, handle elsewhere */ if (error->error_code != BadWindow) { assert(NULL != OldErrorHandler); (*OldErrorHandler)(display, error); } /* Note: Return is ignored */ return(0); } /* Function: SetupXDisplay * Description: Sets up our connection to the X server's display */ static void SetupXDisplay(void) { int eventnum = 0, errornum = 0, majornum = 0, minornum = 0; /* Get Display Pointer */ TheXDisplay = XOpenDisplay(NULL); if (TheXDisplay == NULL) { croak("X11::GUITest - This program is designed to run in X Windows!\n"); } /* Ensure the XTest extension is available */ if (!XTestQueryExtension(TheXDisplay, &eventnum, &errornum, &majornum, &minornum)) { croak("X11::GUITest - XServer %s doesn't support the XTest extensions!\n", DisplayString(TheXDisplay)); } TheScreen = DefaultScreen(TheXDisplay); /* Discard current events in queue. */ XSync(TheXDisplay, True); } /* Function: CloseXDisplay * Description: Closes our connection to the X server's display */ static void CloseXDisplay(void) { if (TheXDisplay) { XSync(TheXDisplay, False); XCloseDisplay(TheXDisplay); TheXDisplay = NULL; } } /* Function: IsNumber * Description: Determines if the specified string represents a * number. */ static BOOL IsNumber(const char *str) { size_t x = 0, len = 0; assert(str != NULL); len = strlen(str); for (x = 0; x < len; x++) { if (!isdigit(str[x])) { return(FALSE); } } return(TRUE); } /* Function: GetRegKeySym * Description: Given a regular key name as a single character(i.e., a), this * function obtains the appropriate keysym by calling GetKeySym(). * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. Also, * on success, sym gets set to the appropriate keysym. On failure, sym * will get set to NoSymbol. */ static BOOL GetRegKeySym(const char name, KeySym *sym) { #define MAX_REG_KEY 2 static char key[MAX_REG_KEY] = ""; key[0] = name; key[1] = NUL; return( GetKeySym(key, sym) ); } /* Function: GetKeycodeFromKeysym * Description: Wrapper around XKeysymToKeycode. Supports compile-time * workarounds, etc. */ static KeyCode GetKeycodeFromKeysym(Display *display, KeySym keysym) { KeyCode kc = XKeysymToKeycode(display, keysym); #ifdef X11_GUITEST_ALT_L_FALLBACK_META_L /* Xvfb lacks XK_Alt_L; fall back to XK_Meta_L */ if (kc == 0 && keysym == XK_Alt_L) { kc = XKeysymToKeycode(display, XK_Meta_L); } #endif return(kc); } /* Function: PressKeyImp * Description: Presses the key for the specified keysym. Lower-level * implementation. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL PressKeyImp(KeySym sym) { KeyCode kc = 0; BOOL retval = 0; kc = GetKeycodeFromKeysym(TheXDisplay, sym); if (kc == 0) { return(FALSE); } retval = (BOOL)XTestFakeKeyEvent(TheXDisplay, kc, True, EventSendDelay); XFlush(TheXDisplay); return(retval); } /* Function: ReleaseKeyImp * Description: Releases the key for the specified keysym. Lower-level * implementation. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL ReleaseKeyImp(KeySym sym) { KeyCode kc = 0; BOOL retval = 0; kc = GetKeycodeFromKeysym(TheXDisplay, sym); if (kc == 0) { return(FALSE); } retval = (BOOL)XTestFakeKeyEvent(TheXDisplay, kc, False, EventSendDelay); XFlush(TheXDisplay); return(retval); } /* Function: PressReleaseKeyImp * Description: Presses and releases the key for the specified keysym. * Also implements key send delay. Lower-level implementation. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL PressReleaseKeyImp(KeySym sym) { if (!PressKeyImp(sym)) { return(FALSE); } if (!ReleaseKeyImp(sym)) { return(FALSE); } /* Possibly wait between(after) keystrokes */ if (KeySendDelay > 0) { /* usleep(500 * 1000) = ~500ms */ usleep(KeySendDelay * 1000); } return(TRUE); } /* Function: IsShiftNeeded * Description: Determines if the specified keysym needs the shift * modifier. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL IsShiftNeeded(KeySym sym) { KeySym ksl = 0, ksu = 0, *kss = NULL; KeyCode kc = 0; int syms = 0; BOOL needed = FALSE; kc = GetKeycodeFromKeysym(TheXDisplay, sym); if (!kc) { return(FALSE); } /* kc(grave) = kss(grave, asciitilde, ) */ kss = XGetKeyboardMapping(TheXDisplay, kc, 1, &syms); XConvertCase(sym, &ksl, &ksu); if (sym == kss[0] && (sym == ksl && sym == ksu)) { /* Not subject to case conversion */ needed = FALSE; } else if (sym == ksl && sym != ksu) { /* Shift not needed */ needed = FALSE; } else { /* Shift needed */ needed = TRUE; } XFree(kss); return(needed); } /* Function: ProcessBraceSet * Description: Takes a brace set such as: {Tab}, {Tab 3}, * {Tab Tab a b c}, {PAUSE 500}, {PAUSE 500 Tab}, etc. * and breaks it into components, then proceeds to press * the appropriate keys or perform the special functionality * requested (i.e., PAUSE). Numeric elements are used in the * special functionality or simply to ensure the previous key * element gets pressed the specified number of times. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL ProcessBraceSet(const char *braceset, size_t *len) { enum {NONE, PAUSE, KEY}; /* Various Functionalities */ int cmd = NONE, count = 0, i = 0; BOOL needshift = FALSE; char *buffer = NULL, *endbrc = NULL, *token = NULL; KeySym sym = 0; assert(braceset != NULL); assert(len != NULL); /* Fail if there isn't a valid brace set */ if (*braceset != '{' || !strchr(braceset, '}')) { return(FALSE); } /* Create backup buffer because we are using strtok */ buffer = (char *)safemalloc(strlen(braceset)); if (buffer == NULL) { return(FALSE); } /* Ignore beginning { char */ strcpy(buffer, &braceset[1]); /* Get brace end in buffer */ endbrc = strchr(buffer, '}'); if (endbrc == NULL) { safefree(buffer); return(FALSE); } /* If we have a quoted }, move over one character */ if (endbrc[1] == '}') { endbrc++; } /* Terminate brace set */ *endbrc = NUL; /* Store brace set length for calling function. Include * 2 for {} we ignored */ *len = strlen(buffer) + 2; /* Work on the space delimited items in the buffer. */ if ( !(token = strtok(buffer, " ")) ) { safefree(buffer); return(FALSE); } do { /* } while ( (token = strtok(NULL, " ")) ); */ count = 0; if (IsNumber(token)) { /* Yes, a number, so convert it for key depresses or for command specific use */ if ( (count = atoi(token)) <= 0 ) { safefree(buffer); return(FALSE); } } else { cmd = NONE; /* Special functionality? */ if (strcasecmp(token, "PAUSE") == 0) { /* Yes, PAUSE, so continue on to get the duration count */ cmd = PAUSE; continue; } else { /* No, just a key, so get symbol */ cmd = KEY; if (!GetKeySym(token, &sym)) { safefree(buffer); return(FALSE); } needshift = IsShiftNeeded(sym); if (needshift) { PressKeyImp(XK_Shift_L); } /* Press key */ if (!PressReleaseKeyImp(sym)) { if (needshift) { ReleaseKeyImp(XK_Shift_L); } safefree(buffer); return(FALSE); } if (needshift) { ReleaseKeyImp(XK_Shift_L); } } } /* Handle commands that can use a specified count */ if (count > 0) { switch (cmd) { case PAUSE: /* usleep(500 * 1000) = 500ms */ usleep(count * 1000); break; case KEY: /* Repeat the last key if needed. Start at iteration 2 * because we have already depressed key once up above */ /* Use shift if needed */ if (needshift) { PressKeyImp(XK_Shift_L); } for (i = 2; i <= count; i++) { /* Use sym that was already stored from above */ if (!PressReleaseKeyImp(sym)) { if (needshift) { ReleaseKeyImp(XK_Shift_L); } safefree(buffer); return(FALSE); } } if (needshift) { ReleaseKeyImp(XK_Shift_L); } break; default: /* Fail, we have a count, but an unknown command! */ safefree(buffer); return(FALSE); }; /* switch (cmd) { */ } /* if (count > 0) { */ } while ( (token = strtok(NULL, " ")) ); safefree(buffer); return(TRUE); } /* Function: SendKeysImp * Description: Underlying implementation of the SendKeys routine. Read * the SendKeys documentation below for some specifics. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. * Also, if you add special character handling below, also ensure * the QuoteStringForSendKeys function is accurate in GUITest.pm. */ static BOOL SendKeysImp(const char *keys) { KeySym sym = 0; size_t keyslen = 0, bracelen = 0; size_t x = 0; BOOL retval = FALSE, shift = FALSE, ctrl = FALSE, altgr = FALSE, alt = FALSE, meta = FALSE, modlock = FALSE, needshift = FALSE; assert(keys != NULL); keyslen = strlen(keys); for (x = 0; x < keyslen; x++) { switch (keys[x]) { /* Brace Set? of quoted/special characters (i.e. {{}, {TAB}, {F1 F2}, {PAUSE 200}) */ case '{': if (!ProcessBraceSet(&keys[x], &bracelen)) { return(FALSE); } /* Skip past the brace set, Note: - 1 because we are at { already */ x += (bracelen - 1); continue; /* Modifiers? */ case '~': retval = PressReleaseKeyImp(XK_Return); break; case '+': /* Shift */ retval = PressKeyImp(XK_Shift_L); shift = TRUE; break; case '^': /* Control */ retval = PressKeyImp(XK_Control_L); ctrl = TRUE; break; case '%': /* Alt */ retval = PressKeyImp(XK_Alt_L); alt = TRUE; break; case '#': /* Meta */ retval = PressKeyImp(XK_Meta_L); meta = TRUE; break; case '&': /* AltGr */ retval = PressKeyImp(XK_ISO_Level3_Shift); altgr = TRUE; break; case '(': modlock = TRUE; break; case ')': modlock = FALSE; break; /* Regular Key? (a, b, c, 1, 2, 3, _, *, %), etc. */ default: if (!GetRegKeySym(keys[x], &sym)) { return(FALSE); } /* Use shift if needed */ needshift = IsShiftNeeded(sym); if (!shift && needshift) { PressKeyImp(XK_Shift_L); } retval = PressReleaseKeyImp(sym); /* Release shift if needed */ if (!shift && needshift) { ReleaseKeyImp(XK_Shift_L); } break; }; /* switch (keys[x]) { */ /* If modlock coming up next, go on to process it */ if (keys[x + 1] == '(') { continue; } /* Ensure modifiers are clear when needed */ if (!modlock) { if (shift) { ReleaseKeyImp(XK_Shift_L); shift = FALSE; } if (ctrl) { ReleaseKeyImp(XK_Control_L); ctrl = FALSE; } if (alt) { ReleaseKeyImp(XK_Alt_L); alt = FALSE; } if (meta) { ReleaseKeyImp(XK_Meta_L); meta = FALSE; } if (altgr) { ReleaseKeyImp(XK_ISO_Level3_Shift); altgr = FALSE; } } if (!retval) { return(FALSE); } } /* for (x = 0; x < keyslen; x++) { */ return(TRUE); } /* Function: IsWindowImp * Description: Underlying implementation of the IsWindow routine. Read * the IsWindow documentation below for some specifics. * Note: Returns non-zero for true, zero for false. */ static BOOL IsWindowImp(Window win) { XWindowAttributes wattrs = {0}; BOOL retval; OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); retval = (BOOL)(XGetWindowAttributes(TheXDisplay, win, &wattrs) != 0); XSetErrorHandler(OldErrorHandler); return(retval); } /* Function: AddChildWindow * Description: Adds the specified window Id to the internally managed * table of available window Ids. Also handles the memory * allocation for this table. * Note: Returns TRUE (non-zero) on success, FALSE (zero) on failure. */ static BOOL AddChildWindow(Window win) { enum {INIT = 1, GROW = 2}; /* Memory Allocation */ if (!win) { return(FALSE); } if (ChildWindows.Ids == NULL) { /* Initialize */ ChildWindows.Ids = (Window *)safemalloc(INIT * sizeof(Window)); if (ChildWindows.Ids == NULL) { return(FALSE); } ChildWindows.Max = INIT; ChildWindows.NVals = 0; } else if (ChildWindows.NVals >= ChildWindows.Max) { /* Grow */ /* Note: Did not use [insert fancy algorythm name here] algorythm here on purpose */ Window *TempIds = NULL; TempIds = (Window *)saferealloc(ChildWindows.Ids, (GROW * ChildWindows.Max) * sizeof(Window)); if (TempIds == NULL) { return(FALSE); } ChildWindows.Max *= GROW; ChildWindows.Ids = TempIds; } /* Place the new window Id in */ ChildWindows.Ids[ChildWindows.NVals] = win; ChildWindows.NVals++; return(TRUE); } /* Function: ClearChildWindows * Description: Clears the table of window Ids. Memory allocated * in AddChildWindow is not freed here, because * we'll probably want to take advantage of it again. * Note: No return value. */ static void ClearChildWindows(void) { if (ChildWindows.Ids) { memset(ChildWindows.Ids, 0, ChildWindows.Max * sizeof(Window)); } ChildWindows.NVals = 0; } /* Function: FreeChildWindows * Description: Deallocates the memory of the window Id table * that was allocated through AddChildWindow. This * should be called on exit. * Note: No return value. */ static void FreeChildWindows(void) { if (ChildWindows.Ids) { safefree(ChildWindows.Ids); ChildWindows.Ids = NULL; } ChildWindows.NVals = 0; ChildWindows.Max = 0; } /* Function: EnumChildWindowsAux * Description: Obtains the list of window Ids * Note: Returns value indicating success of obtaining * windows. */ static BOOL EnumChildWindowsAux(Window win) { Window root = 0, parent = 0, *children = NULL; UINT childcount = 0; UINT i = 0; /* get list of child windows */ if (XQueryTree(TheXDisplay, win, &root, &parent, &children, &childcount)) { for (i = 0; i < childcount; i++) { /* Add Child */ AddChildWindow(children[i]); /* Look for its descendents */ if (!EnumChildWindowsAux(children[i])) { XFree(children); return FALSE; } } if (children) { XFree(children); } return TRUE; } else { return FALSE; } } /* Function: EnumChildWindows * Description: Calls utility function to obtain list of window * Ids. Helps handle window transitions. * Note: Returns nothing. */ static void EnumChildWindows(Window win) { BOOL success = 0; for (;;) { if (!IsWindowImp(win)) { return; } OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); success = EnumChildWindowsAux(win); XSetErrorHandler(OldErrorHandler); if (success) { return; } /* Failure: try again, in 1/2 second. */ ClearChildWindows(); usleep(500000); /* 500000 = 1/2 second */ } } MODULE = X11::GUITest PACKAGE = X11::GUITest PROTOTYPES: DISABLE void InitGUITest() PPCODE: /* Things to do on initialization */ SetupXDisplay(); XTestGrabControl(TheXDisplay, True); XSRETURN(0); void DeInitGUITest() PPCODE: /* Things to do on deinitialization */ CloseXDisplay(); FreeChildWindows(); XSRETURN(0); int DefaultScreen() CODE: RETVAL = TheScreen; OUTPUT: RETVAL int ScreenCount() CODE: RETVAL = ScreenCount(TheXDisplay); OUTPUT: RETVAL ULONG SetEventSendDelay(delay) ULONG delay CODE: /* Returning old delay amount */ RETVAL = EventSendDelay; EventSendDelay = delay; OUTPUT: RETVAL ULONG GetEventSendDelay() CODE: RETVAL = EventSendDelay; OUTPUT: RETVAL ULONG SetKeySendDelay(delay) ULONG delay CODE: /* Returning old delay amount */ RETVAL = KeySendDelay; KeySendDelay = delay; OUTPUT: RETVAL ULONG GetKeySendDelay() CODE: RETVAL = KeySendDelay; OUTPUT: RETVAL SV * GetWindowName(win) Window win PREINIT: char *name = NULL; XTextProperty wm_name = {0}; Atom wm_name_prop = None; CODE: RETVAL = &PL_sv_undef; if (IsWindowImp(win)) { if (XFetchName(TheXDisplay, win, &name)) { RETVAL = newSVpv(name, strlen(name)); XFree(name); } else { wm_name_prop = XInternAtom(TheXDisplay, "_NET_WM_NAME", False); if (wm_name_prop != None) { if (XGetTextProperty(TheXDisplay, win, &wm_name, wm_name_prop)) { RETVAL = newSVpv((char *)wm_name.value, strlen((char *)wm_name.value)); XFree(wm_name.value); } } } } OUTPUT: RETVAL BOOL SetWindowName(win, name) Window win char *name PREINIT: XTextProperty textprop = {0}; size_t namelen = 0; Atom utf8_string = 0; Atom net_wm_name = 0; Atom net_wm_icon_name = 0; CODE: RETVAL = FALSE; if (IsWindowImp(win)) { if (XStringListToTextProperty(&name, 1, &textprop)) { XSetWMName(TheXDisplay, win, &textprop); XSetWMIconName(TheXDisplay, win, &textprop); XFree(textprop.value); RETVAL = TRUE; } /* These UTF8 window name properties can be the properties * that get displayed, so we set them too. */ utf8_string = XInternAtom(TheXDisplay, "UTF8_STRING", True); if (utf8_string != None) { net_wm_name = XInternAtom(TheXDisplay, "_NET_WM_NAME", True); net_wm_icon_name = XInternAtom(TheXDisplay, "_NET_WM_ICON_NAME", True); if (net_wm_name != None && net_wm_icon_name != None) { namelen = strlen(name); XChangeProperty(TheXDisplay, win, net_wm_name, utf8_string, 8, PropModeReplace, (unsigned char *)name, namelen); XChangeProperty(TheXDisplay, win, net_wm_icon_name, utf8_string, 8, PropModeReplace, (unsigned char *)name, namelen); } } } OUTPUT: RETVAL Window GetRootWindow(scr_num = NO_INIT) int scr_num CODE: if (0 == items) scr_num = TheScreen; if (scr_num >= 0 && scr_num < ScreenCount(TheXDisplay)) RETVAL = RootWindow(TheXDisplay, scr_num); else RETVAL = None; OUTPUT: RETVAL void GetChildWindows(win) Window win PREINIT: UINT i = 0; PPCODE: EnumChildWindows(win); EXTEND(SP, (int)ChildWindows.NVals); for (i = 0; i < ChildWindows.NVals; i++) { PUSHs(sv_2mortal(newSVuv((UV)ChildWindows.Ids[i]))); } ClearChildWindows(); XSRETURN(i); BOOL MoveMouseAbs(x, y, scr_num = NO_INIT) int x int y int scr_num CODE: if (items < 3) scr_num = TheScreen; if (scr_num >= 0 && scr_num < ScreenCount(TheXDisplay)) { #ifndef X11_GUITEST_USING_XINERAMA RETVAL = (BOOL)XTestFakeMotionEvent(TheXDisplay, scr_num, x, y, EventSendDelay); XFlush(TheXDisplay); #else ULONG tmp; /* I decided not to set our error handler, since the window must exist. */ XWarpPointer(TheXDisplay, None, RootWindow(TheXDisplay, scr_num), 0, 0, 0, 0, x, y); XSync(TheXDisplay, False); tmp = EventSendDelay / (ULONG) 1000; while ((ULONG) 0 != tmp) tmp = (ULONG) sleep((int) tmp); tmp = EventSendDelay % (ULONG) 1000; usleep(1000 * tmp); #endif RETVAL = (BOOL) 1; } else { RETVAL = (BOOL) 0; } OUTPUT: RETVAL void GetMousePos() PREINIT: Window root = 0, child = 0; int root_x = 0, root_y = 0; int win_x = 0, win_y = 0, scr_num = 0; UINT mask = 0; PPCODE: /* We do not bother to set our error handler because the window given has to exist. */ XQueryPointer(TheXDisplay, RootWindow(TheXDisplay, TheScreen), &root, &child, &root_x, &root_y, &win_x, &win_y, &mask); EXTEND(SP, 3); PUSHs( sv_2mortal(newSViv((IV)root_x)) ); PUSHs( sv_2mortal(newSViv((IV)root_y)) ); for (scr_num = ScreenCount(TheXDisplay) - 1; scr_num >= 0 ; --scr_num) { if (root == RootWindow(TheXDisplay, scr_num)) { break; } assert(0 != scr_num); /* There is something really wrong with the Xlib data if this "assert" fails. */ } PUSHs( sv_2mortal(newSViv((IV)scr_num)) ); XSRETURN(3); BOOL PressMouseButton(button) int button CODE: RETVAL = (BOOL)XTestFakeButtonEvent(TheXDisplay, button, True, EventSendDelay); XFlush(TheXDisplay); OUTPUT: RETVAL BOOL ReleaseMouseButton(button) int button CODE: RETVAL = (BOOL)XTestFakeButtonEvent(TheXDisplay, button, False, EventSendDelay); XFlush(TheXDisplay); OUTPUT: RETVAL BOOL SendKeys(keys) char *keys CODE: RETVAL = SendKeysImp(keys); OUTPUT: RETVAL BOOL PressKey(key) char *key PREINIT: KeySym sym = 0; CODE: RETVAL = GetKeySym(key, &sym); if (RETVAL) { RETVAL = PressKeyImp(sym); } OUTPUT: RETVAL BOOL ReleaseKey(key) char *key PREINIT: KeySym sym = 0; CODE: RETVAL = GetKeySym(key, &sym); if (RETVAL) { RETVAL = ReleaseKeyImp(sym); } OUTPUT: RETVAL BOOL PressReleaseKey(key) char *key PREINIT: KeySym sym = 0; CODE: RETVAL = GetKeySym(key, &sym); if (RETVAL) { RETVAL = PressReleaseKeyImp(sym); } OUTPUT: RETVAL BOOL IsKeyPressed(key) char *key PREINIT: int pos = 0; KeySym sym = 0; KeyCode kc = 0, skc = 0; BOOL keyon = FALSE, shifton = FALSE; char keys_return[KEYMAP_VECTOR_SIZE] = ""; CODE: if (key && GetKeySym(key, &sym)) { kc = GetKeycodeFromKeysym(TheXDisplay, sym); skc = GetKeycodeFromKeysym(TheXDisplay, XK_Shift_L); XQueryKeymap(TheXDisplay, keys_return); for (pos = 0; pos < (KEYMAP_VECTOR_SIZE * KEYMAP_BIT_COUNT); pos++) { /* For the derived keycode, are we at the correct bit position for it? */ if (kc == pos) { /* Check the bit at this position to determine the state of the key */ if ( keys_return[pos / KEYMAP_BIT_COUNT] & (1 << (pos % KEYMAP_BIT_COUNT)) ) { /* Bit On, so key is pressed */ keyon = TRUE; } } /* For the shift keycode, ... */ if (skc == pos) { /* Check the bit at this position to determine the state of the shift key */ if ( keys_return[pos / KEYMAP_BIT_COUNT] & (1 << (pos % KEYMAP_BIT_COUNT)) ) { /* Bit On, so shift is pressed */ shifton = TRUE; } } } /* for (pos = 0; pos < (KEYMAP_VECTOR_SIZE * KEYMAP_BIT_COUNT); pos++) { */ } /* if (key && GetKeySym(key, &sym)) { */ /* Determine result */ if (keyon) { /* Key is on, so use its keysym to determine if shift modifier needs to be verified also */ if (IsShiftNeeded(sym)) { RETVAL = (shifton); } else { RETVAL = (!shifton); } } else { /* Key not on, so it is not pressed */ RETVAL = FALSE; } OUTPUT: RETVAL BOOL IsMouseButtonPressed(button) int button PREINIT: Window root = 0, child = 0; int root_x = 0, root_y = 0; int win_x = 0, win_y = 0; UINT mask = 0; CODE: XQueryPointer(TheXDisplay, RootWindow(TheXDisplay, TheScreen), &root, &child, &root_x, &root_y, &win_x, &win_y, &mask); switch (button) { case Button1: RETVAL = (mask & Button1Mask); break; case Button2: RETVAL = (mask & Button2Mask); break; case Button3: RETVAL = (mask & Button3Mask); break; case Button4: RETVAL = (mask & Button4Mask); break; case Button5: RETVAL = (mask & Button5Mask); break; default: RETVAL = FALSE; break; }; OUTPUT: RETVAL BOOL IsWindowCursor(win, cursor) Window win Cursor cursor CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XTestCompareCursorWithWindow(TheXDisplay, win, cursor); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL IsWindow(win) Window win CODE: RETVAL = IsWindowImp(win); OUTPUT: RETVAL BOOL IsWindowViewable(win) Window win PREINIT: XWindowAttributes wattrs = {0}; CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); if (!XGetWindowAttributes(TheXDisplay, win, &wattrs)) { RETVAL = FALSE; } else { RETVAL = (wattrs.map_state == IsViewable); } XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL MoveWindow(win, x, y) Window win int x int y CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XMoveWindow(TheXDisplay, win, x, y); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL ResizeWindow(win, w, h) Window win int w int h CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XResizeWindow(TheXDisplay, win, w, h); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL IconifyWindow(win) Window win PREINIT: XWindowAttributes wattrs = {0}; int scr_num; CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); if (XGetWindowAttributes(TheXDisplay, win, &wattrs)) { for (scr_num = ScreenCount(TheXDisplay) - 1; scr_num >= 0 ; --scr_num) { if ( wattrs.screen == ScreenOfDisplay(TheXDisplay, scr_num)) { break; } /* There is something really wrong with the Xlib data if this "assert" fails. */ assert(0 != scr_num); } RETVAL = XIconifyWindow(TheXDisplay, win, scr_num); XSync(TheXDisplay, False); } else { RETVAL = (BOOL) 0; } XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL UnIconifyWindow(win) Window win CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XMapWindow(TheXDisplay, win); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL RaiseWindow(win) Window win CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XRaiseWindow(TheXDisplay, win); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL BOOL LowerWindow(win) Window win CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); RETVAL = XLowerWindow(TheXDisplay, win); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); OUTPUT: RETVAL Window GetInputFocus() PREINIT: Window focus = 0; int revert = 0; CODE: XGetInputFocus(TheXDisplay, &focus, &revert); RETVAL = focus; OUTPUT: RETVAL BOOL SetInputFocus(win) Window win PREINIT: Window focus = 0; int revert = 0; CODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); /* Note: Per function man page, there is no effect if the time parameter * of this call isn't accurate. Will use CurrentTime. Also, it * appears that we can't trust its return value. */ XSetInputFocus(TheXDisplay, win, RevertToParent, CurrentTime); XSync(TheXDisplay, False); XSetErrorHandler(OldErrorHandler); /* Verify that the window now has focus. Used to determine return value */ XGetInputFocus(TheXDisplay, &focus, &revert); RETVAL = (focus == win); OUTPUT: RETVAL void GetWindowPos(win) Window win PREINIT: XWindowAttributes wattrs = {0}; Window child = 0; int num_ret = 0, x = 0, y = 0, scr_num; PPCODE: OldErrorHandler = XSetErrorHandler(IgnoreBadWindow); if (XGetWindowAttributes(TheXDisplay, win, &wattrs)) { XTranslateCoordinates(TheXDisplay, win, wattrs.root, 0 - wattrs.border_width, 0 - wattrs.border_width, &x, &y, &child); EXTEND(SP, 6); PUSHs( sv_2mortal(newSViv((IV)x)) ); PUSHs( sv_2mortal(newSViv((IV)y)) ); PUSHs( sv_2mortal(newSViv((IV)wattrs.width)) ); PUSHs( sv_2mortal(newSViv((IV)wattrs.height)) ); PUSHs( sv_2mortal(newSViv((IV)wattrs.border_width)) ); for (scr_num = ScreenCount(TheXDisplay) - 1; scr_num >= 0 ; --scr_num) { if ( wattrs.screen == ScreenOfDisplay(TheXDisplay, scr_num)) { break; } /* There is something really wrong with the Xlib data if this "assert" fails. */ assert(0 != scr_num); } PUSHs( sv_2mortal(newSViv((IV)scr_num)) ); num_ret = 6; } XSetErrorHandler(OldErrorHandler); XSRETURN(num_ret); Window GetParentWindow(win) Window win PREINIT: Window parent = 0, *children = NULL, root = 0; UINT childcount = 0; CODE: RETVAL = 0; if (XQueryTree(TheXDisplay, win, &root, &parent, &children, &childcount)) { XFree(children); RETVAL = parent; } OUTPUT: RETVAL void GetScreenRes(scr_num = NO_INIT) int scr_num PREINIT: int x = 0, y = 0, num_ret = 0; PPCODE: if (0 == items) scr_num = TheScreen; if (scr_num >= 0 && scr_num < ScreenCount(TheXDisplay)) { x = DisplayWidth(TheXDisplay, scr_num); y = DisplayHeight(TheXDisplay, scr_num); EXTEND(SP, 2); PUSHs( sv_2mortal(newSViv((IV)x)) ); PUSHs( sv_2mortal(newSViv((IV)y)) ); num_ret = 2; } XSRETURN(num_ret); int GetScreenDepth(scr_num = NO_INIT) int scr_num CODE: if (0 == items) scr_num = TheScreen; if (scr_num >= 0 && scr_num < ScreenCount(TheXDisplay)) { RETVAL = DefaultDepth(TheXDisplay, scr_num); } else { RETVAL = -1; } OUTPUT: RETVAL unsigned long GetWindowPid(win) Window win PREINIT: Atom wm_pid_prop = None; Atom actual_type = None; int actual_format = 0; int status = 0; unsigned long nitems = 0; unsigned long bytes_after = 0; unsigned long *prop = NULL; CODE: RETVAL = 0; wm_pid_prop = XInternAtom(TheXDisplay, "_NET_WM_PID", False); if (wm_pid_prop != None) { status = XGetWindowProperty(TheXDisplay, win, wm_pid_prop, 0, 1, False, XA_CARDINAL, &actual_type, &actual_format, &nitems, &bytes_after, (unsigned char **)&prop); if (status == Success && actual_type != None) { RETVAL = *prop; XFree(prop); } } OUTPUT: RETVAL X11-GUITest-0.28/KeyUtil.c0000644000000000000000000001052412264252262013533 0ustar rootroot/* X11::GUITest ($Id: KeyUtil.c 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifdef __cplusplus extern "C" { #endif #ifndef NOPERL #include "EXTERN.h" #include "perl.h" #include "XSUB.h" #else #include #endif #ifdef __cplusplus } #endif #include #include #include #include #include #include #include #include #include #include "KeyUtil.h" static const KeyNameSymTable kns_table[] = { /* {Name, Sym}, */ {"BAC", XK_BackSpace}, {"BS", XK_BackSpace}, {"BKS", XK_BackSpace}, {"BRE", XK_Break}, {"CAN", XK_Cancel}, {"CAP", XK_Caps_Lock}, {"DEL", XK_Delete}, {"DOWN", XK_Down}, {"END", XK_End}, {"ENT", XK_Return}, {"ESC", XK_Escape}, {"HEL", XK_Help}, {"HOM", XK_Home}, {"INS", XK_Insert}, {"LEF", XK_Left}, {"NUM", XK_Num_Lock}, {"PGD", XK_Next}, {"PGU", XK_Prior}, {"PRT", XK_Print}, {"RIG", XK_Right}, {"SCR", XK_Scroll_Lock}, {"TAB", XK_Tab}, {"UP", XK_Up}, {"F1", XK_F1}, {"F2", XK_F2}, {"F3", XK_F3}, {"F4", XK_F4}, {"F5", XK_F5}, {"F6", XK_F6}, {"F7", XK_F7}, {"F8", XK_F8}, {"F9", XK_F9}, {"F10", XK_F10}, {"F11", XK_F11}, {"F12", XK_F12}, {"SPC", XK_space}, {"SPA", XK_space}, {"LSK", XK_Super_L}, {"RSK", XK_Super_R}, {"MNU", XK_Menu}, {"~", XK_asciitilde}, {"_", XK_underscore}, {"[", XK_bracketleft}, {"]", XK_bracketright}, {"!", XK_exclam}, {"\"", XK_quotedbl}, {"#", XK_numbersign}, {"$", XK_dollar}, {"%", XK_percent}, {"&", XK_ampersand}, {"'", XK_quoteright}, {"*", XK_asterisk}, {"+", XK_plus}, {",", XK_comma}, {"-", XK_minus}, {".", XK_period}, {"?", XK_question}, {"<", XK_less}, {">", XK_greater}, {"=", XK_equal}, {"@", XK_at}, {":", XK_colon}, {";", XK_semicolon}, {"\\", XK_backslash}, {"`", XK_grave}, {"{", XK_braceleft}, {"}", XK_braceright}, {"|", XK_bar}, {"^", XK_asciicircum}, {"(", XK_parenleft}, {")", XK_parenright}, {" ", XK_space}, {"/", XK_slash}, {"\t", XK_Tab}, {"\n", XK_Return}, {"LSH", XK_Shift_L}, {"RSH", XK_Shift_R}, {"LCT", XK_Control_L}, {"RCT", XK_Control_R}, {"LAL", XK_Alt_L}, {"RAL", XK_Alt_R}, {"LMA", XK_Meta_L}, {"RMA", XK_Meta_R}, }; static const KeyNameSymTable kns_modcode_table[] = { /* {ModCodeName, Sym}, */ {"^", XK_Control_L}, {"%", XK_Alt_L}, {"+", XK_Shift_L}, {"#", XK_Meta_L}, {"^", XK_Control_R}, {"&",XK_ISO_Level3_Shift}, {"+", XK_Shift_R}, }; BOOL GetKeySym(const char *name, KeySym *sym) { size_t x = 0; assert(name != NULL); assert(sym != NULL); /* See if we can obtain the KeySym without looking at table. * Note: XStringToKeysym("space") would return KeySym * XK_space... Case sensitive. */ *sym = XStringToKeysym(name); if (*sym != NoSymbol) { /* Got It */ return(TRUE); } /* Do case insensitive search for specified name to obtain the KeySym from table */ for (x = 0; x < (sizeof(kns_table) / sizeof(KeyNameSymTable)); x++) { if (strcasecmp(kns_table[x].Name, name) == 0) { /* Found It */ *sym = kns_table[x].Sym; return(TRUE); } } /* Not Found */ *sym = NoSymbol; return(FALSE); } const char *GetKeyName(KeySym sym) { size_t x = 0; /* Look for KeySym in order to obtain name */ for (x = 0; x < (sizeof(kns_table) / sizeof(KeyNameSymTable)); x++) { if (sym == kns_table[x].Sym) { /* Found It */ return kns_table[x].Name; } } return XKeysymToString(sym); } const char *GetModifierCode(KeySym sym) { size_t x = 0; for (x = 0; x < (sizeof(kns_modcode_table) / sizeof(KeyNameSymTable)); x++) { if (sym == kns_modcode_table[x].Sym) { return kns_modcode_table[x].Name; } } return NULL; } X11-GUITest-0.28/GUITest.h0000644000000000000000000000215312264252262013435 0ustar rootroot/* X11::GUITest ($Id: GUITest.h 231 2014-01-11 14:26:57Z ctrondlp $) * * Copyright (c) 2003-2014 Dennis K. Paulsen, All Rights Reserved. * Email: ctrondlp@cpan.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #ifndef GUITest_h #define GUITest_h #define DEF_EVENT_SEND_DELAY 10 /* Value < 10 not recommended */ #define DEF_KEY_SEND_DELAY 0 #define KEYMAP_VECTOR_SIZE 32 #define KEYMAP_BIT_COUNT 8 typedef struct WindowTable { Window *Ids; UINT NVals; UINT Max; } WindowTable; #endif /* #ifndef GUITest_h */ X11-GUITest-0.28/Changes0000644000000000000000000001640012311564011013262 0ustar rootrootX11::GUITest ($Id: Changes 241 2014-03-16 11:39:42Z ctrondlp $) This is the list of module changes between revisions. -------------------------------------------------------------------- 0.28 Mon Mar 17 2014 07:15 - Fix RT #75728: X11-GUITest: Build Dependencies: libxt-dev and libxtst-dev - Applied RT #88194: Correct minor typo and remove a link dependency - Support for RT #69960: GetWindowPid() and GetWindowsFromPid() - Fix RT #84053, #93677: With newer Perl (5.14), modules should include $Config{ccflags} when also specifying their own - Minor updates to file preambles, comments - Updated for RT #93668 - Updated license file - Updates for RT #93667 - For `make test`, support environments that may have 0 client windows (xvfb-run) - Various documentation updates 0.27 Wed Feb 05 2013 00:01 - Move some files to the project root dir. - Fix RT #79751: Build on OpenBSD AMD64 failed - Add repository and license info 0.26 Sat Feb 02 2013 14:20 - Replace legacy XKeycodeToKeysym calls . Fix typo DOW to DOWN - Add supoprt fot AltGr and right Control and Shift - Enhanced GetWindowName() to check _NET_WM_NAME for text. 0.25 Sat May 21 2011 09:00 - Added IsWindowCursor() function to determine if a window has the specified cursor. - Various recorder enhancements. - Added -d (delaythreshold) option to recorder. Allows for inclusion of more/less granular event delays. - Added WaitSeconds() function, perhaps a little more intuitive then select. - Support for mouse wheel scrolling, using M_DOWN and M_UP constants. 0.24 Sun May 01 2011 16:50 - Reorganized source code and POD. - Updated x11guirecord build to use autotools. - Backend support added for internationalization. - Alternate document formats is now an optional build step for maintainer. 0.23 Sun Apr 24 2011 22:30 - Added support for recording using x11guirecord utility. - Updated behavior of QuoteStringForSendKeys function in handling zeros. - Added alias QSfSK() to QuoteStringForSendKeys() function. 0.22 Thu Jan 06 2011 20:00 - Example script eg/FindControlVisually.pl added to help demonstrate finding controls/widgets on screen using a baseline image. - Applied Thorsten H's AltGr keyboard modifier support. This applies to international (German, etc.) languages. - Minor compiler warning fix. - Skip building/testing if we're in AUTOMATED_TESTING (smoke testing) and DISPLAY isn't setup. Alleviate bogus test reports in this case. 0.21 Sat May 06 2006 10:24 - Implemented Nelson Caro's patch 1.1 dealing mostly with Makefile.PL enhancements concerning older versions of Perl. - Implemented Nelson Caro's patch 1.2 dealing with efficiency improvements, and fault handling. Also, GetWindowPos() now returns the border width of a window. - Implemented Nelson Caro's patch 1.3; which improves GetWindowFromPoint() in dealing with correct window border width. Also, FindWindowLike now handles invalid windows better. - Applied patches cpan #13682(XK_Meta_L fallback) and cpan #13684 (StartApp) from Alexey Tourbin. Compiler define X11_GUITEST_ALT_L_FALLBACK_META_L enabled by default. - Added special # modifier for Meta_Left. This modifier can be used like the existing ones (Alt=%, Control=^, etc.). - Applied Nelson's updates to test.t. Helps to eleviate X server jams when using Exceed, for MS Windows. Also testing GetMousePos() in list context. - Applied Nelson's patch to support multi-screen operation in various functions. Certain functions now include an additional parameter to specify the screen number. - Corrected incompatibility between Xinerama and the XTest extension. Compile with X11_GUITEST_USING_XINERAMA defined. See Makefile.PL for details. 0.20 Sat Feb 14 2004 09:43 - Now linking to Xext when building to support HP-UX 11 and possibly other OSs. - Added links into the documentation to the various project distribution sites. - test.t checks are now skipped if X Windows isn't running. An appropriate warning message accompanies this. 0.19 Sat Dec 13 2003 11:28 - Added FindWindowLike.pl example script. - Fixed a SendKeys bug spotted on RedHat 7.3 systems. - Added eg/templates/ScriptTemplate.pl for the purpose of constructing future example scripts. - Enhanced to help support Perl v5.5.3 (older; doesn't have newSVuv defined). - Various enhancements to the documentation. - Updated copyrights for new year. 0.18 Sun Sep 28 2003 17:45 - Added GetWindowFromPoint function. - Added GetParentWindow function. - Should now compile/link properly on Solaris systems. 0.17 Sat Sep 06 2003 09:23 - Corrected < and > key mappings. - Minor speed enhancements - Rearranged documentation sections. - Enabled optimizations and all warnings in Makefile.PL 0.16 Sun Aug 03 2003 15:00 - Added PressMouseButton, ReleaseMouseButton. - Added WebBrowser_1.pl example script. - Added more SendKeys examples, i.e. Ctrl-Shift-l - Added SetWindowName function. - Added documentation for DISPLAY environment variable alteration for the purpose of interacting with applications on remote X servers. - test.t modified to accommodate scenarios when there are no windows present that have a WM_NAME property set. - Other minor documentation enhancements. 0.15 Sat Jun 28 2003 17:45 - Quote string function will now handle data present after any embedded newline characters. - Enhanced TextEditor_1.pl example. - Added additional checks in test.t - Pristinized the typemap. - Misc. code/documentation enhancements. - Removed docs/Packaging file. Note: Now using `make tardist` to generate new module builds. - Removed MakeDocs.sh.. Now handled in Makefile.PL - Added a note that goes into man page concerning other documentation. - For those websites that grab only the POD from GUITest.pm, I've added a note into the documentation intended to relay that there is more then just that available for documentation. - Added LSH (Shift_L), RSH (Shift_R), LCT (Control_L), RCT (Control_R), LAL (Alt_L), RAL (Alt_R) abbreviated key names. - Added PressKey and ReleaseKey per suggestion. Also included PressReleaseKey. 0.14 Sun May 18 2003 11:53 - Documentation updates - Official support for FreeBSD 5.0 0.13 Sun Mar 30 2003 19:32 - Enhanced and reenabled man3 POD generation. - Added WaitWindowClose - Added TextEditor_1.pl example script. - Documentation updates 0.12 Fri Mar 21 2003 02:35 - Added IsKeyPressed - Added logical mouse button Ids to :CONST export tag: M_BTN1 - M_BTN5 - Added IsMouseButtonPressed - Updated documentation - Added QuoteStringForSendKeys - Disabled man3 POD generation in Makefile.PL until I find a pristine method of generating one manual page from the PM and XS file. Currently I'm using MakeDocs.sh to construct the core text/html documentation. 0.11 Sun Mar 09 2003 16:01 - Fixed aliased {PGU} and {PGD} keys. - Added GetMousePos, IsChild functions. - Now packaging as X11-GUITest-[VERSION].tar.gz versus x11guitest-[VERSION].tar.gz - Made enhancements to the documentation. 0.10 Tue Mar 05 2003 18:00 - Initial Release.